OpenCloudOS-Kernel/fs/binfmt_elf_fdpic.c

1835 lines
48 KiB
C
Raw Normal View History

/* binfmt_elf_fdpic.c: FDPIC ELF binary format
*
* Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* Derived from binfmt_elf.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/binfmts.h>
#include <linux/string.h>
#include <linux/file.h>
#include <linux/fcntl.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/security.h>
#include <linux/highmem.h>
#include <linux/highuid.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/init.h>
#include <linux/elf.h>
#include <linux/elf-fdpic.h>
#include <linux/elfcore.h>
#include <linux/coredump.h>
#include <linux/dax.h>
#include <asm/uaccess.h>
#include <asm/param.h>
#include <asm/pgalloc.h>
typedef char *elf_caddr_t;
#if 0
#define kdebug(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
#else
#define kdebug(fmt, ...) do {} while(0)
#endif
#if 0
#define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
#else
#define kdcore(fmt, ...) do {} while(0)
#endif
MODULE_LICENSE("GPL");
static int load_elf_fdpic_binary(struct linux_binprm *);
static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *, struct file *);
static int elf_fdpic_map_file(struct elf_fdpic_params *, struct file *,
struct mm_struct *, const char *);
static int create_elf_fdpic_tables(struct linux_binprm *, struct mm_struct *,
struct elf_fdpic_params *,
struct elf_fdpic_params *);
#ifndef CONFIG_MMU
static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *,
unsigned long *);
static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *,
struct file *,
struct mm_struct *);
#endif
static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *,
struct file *, struct mm_struct *);
#ifdef CONFIG_ELF_CORE
static int elf_fdpic_core_dump(struct coredump_params *cprm);
#endif
static struct linux_binfmt elf_fdpic_format = {
.module = THIS_MODULE,
.load_binary = load_elf_fdpic_binary,
#ifdef CONFIG_ELF_CORE
.core_dump = elf_fdpic_core_dump,
#endif
.min_coredump = ELF_EXEC_PAGESIZE,
};
static int __init init_elf_fdpic_binfmt(void)
{
register_binfmt(&elf_fdpic_format);
return 0;
}
static void __exit exit_elf_fdpic_binfmt(void)
{
unregister_binfmt(&elf_fdpic_format);
}
core_initcall(init_elf_fdpic_binfmt);
module_exit(exit_elf_fdpic_binfmt);
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
static int is_elf(struct elfhdr *hdr, struct file *file)
{
if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0)
return 0;
if (hdr->e_type != ET_EXEC && hdr->e_type != ET_DYN)
return 0;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (!elf_check_arch(hdr))
return 0;
if (!file->f_op->mmap)
return 0;
return 1;
}
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
#ifndef elf_check_fdpic
#define elf_check_fdpic(x) 0
#endif
#ifndef elf_check_const_displacement
#define elf_check_const_displacement(x) 0
#endif
static int is_constdisp(struct elfhdr *hdr)
{
if (!elf_check_fdpic(hdr))
return 1;
if (elf_check_const_displacement(hdr))
return 1;
return 0;
}
/*****************************************************************************/
/*
* read the program headers table into memory
*/
static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params,
struct file *file)
{
struct elf32_phdr *phdr;
unsigned long size;
int retval, loop;
if (params->hdr.e_phentsize != sizeof(struct elf_phdr))
return -ENOMEM;
if (params->hdr.e_phnum > 65536U / sizeof(struct elf_phdr))
return -ENOMEM;
size = params->hdr.e_phnum * sizeof(struct elf_phdr);
params->phdrs = kmalloc(size, GFP_KERNEL);
if (!params->phdrs)
return -ENOMEM;
retval = kernel_read(file, params->hdr.e_phoff,
(char *) params->phdrs, size);
if (unlikely(retval != size))
return retval < 0 ? retval : -ENOEXEC;
/* determine stack size for this binary */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_GNU_STACK)
continue;
if (phdr->p_flags & PF_X)
params->flags |= ELF_FDPIC_FLAG_EXEC_STACK;
else
params->flags |= ELF_FDPIC_FLAG_NOEXEC_STACK;
params->stack_size = phdr->p_memsz;
break;
}
return 0;
}
/*****************************************************************************/
/*
* load an fdpic binary into various bits of memory
*/
static int load_elf_fdpic_binary(struct linux_binprm *bprm)
{
struct elf_fdpic_params exec_params, interp_params;
struct pt_regs *regs = current_pt_regs();
struct elf_phdr *phdr;
unsigned long stack_size, entryaddr;
#ifdef ELF_FDPIC_PLAT_INIT
unsigned long dynaddr;
#endif
#ifndef CONFIG_MMU
unsigned long stack_prot;
#endif
struct file *interpreter = NULL; /* to shut gcc up */
char *interpreter_name = NULL;
int executable_stack;
int retval, i;
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 15:10:00 +08:00
kdebug("____ LOAD %d ____", current->pid);
memset(&exec_params, 0, sizeof(exec_params));
memset(&interp_params, 0, sizeof(interp_params));
exec_params.hdr = *(struct elfhdr *) bprm->buf;
exec_params.flags = ELF_FDPIC_FLAG_PRESENT | ELF_FDPIC_FLAG_EXECUTABLE;
/* check that this is a binary we know how to deal with */
retval = -ENOEXEC;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (!is_elf(&exec_params.hdr, bprm->file))
goto error;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (!elf_check_fdpic(&exec_params.hdr)) {
#ifdef CONFIG_MMU
/* binfmt_elf handles non-fdpic elf except on nommu */
goto error;
#else
/* nommu can only load ET_DYN (PIE) ELF */
if (exec_params.hdr.e_type != ET_DYN)
goto error;
#endif
}
/* read the program header table */
retval = elf_fdpic_fetch_phdrs(&exec_params, bprm->file);
if (retval < 0)
goto error;
/* scan for a program header that specifies an interpreter */
phdr = exec_params.phdrs;
for (i = 0; i < exec_params.hdr.e_phnum; i++, phdr++) {
switch (phdr->p_type) {
case PT_INTERP:
retval = -ENOMEM;
if (phdr->p_filesz > PATH_MAX)
goto error;
retval = -ENOENT;
if (phdr->p_filesz < 2)
goto error;
/* read the name of the interpreter into memory */
interpreter_name = kmalloc(phdr->p_filesz, GFP_KERNEL);
if (!interpreter_name)
goto error;
retval = kernel_read(bprm->file,
phdr->p_offset,
interpreter_name,
phdr->p_filesz);
if (unlikely(retval != phdr->p_filesz)) {
if (retval >= 0)
retval = -ENOEXEC;
goto error;
}
retval = -ENOENT;
if (interpreter_name[phdr->p_filesz - 1] != '\0')
goto error;
kdebug("Using ELF interpreter %s", interpreter_name);
/* replace the program with the interpreter */
interpreter = open_exec(interpreter_name);
retval = PTR_ERR(interpreter);
if (IS_ERR(interpreter)) {
interpreter = NULL;
goto error;
}
/*
* If the binary is not readable then enforce
* mm->dumpable = 0 regardless of the interpreter's
* permissions.
*/
would_dump(bprm, interpreter);
retval = kernel_read(interpreter, 0, bprm->buf,
BINPRM_BUF_SIZE);
if (unlikely(retval != BINPRM_BUF_SIZE)) {
if (retval >= 0)
retval = -ENOEXEC;
goto error;
}
interp_params.hdr = *((struct elfhdr *) bprm->buf);
break;
case PT_LOAD:
#ifdef CONFIG_MMU
if (exec_params.load_addr == 0)
exec_params.load_addr = phdr->p_vaddr;
#endif
break;
}
}
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (is_constdisp(&exec_params.hdr))
exec_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* perform insanity checks on the interpreter */
if (interpreter_name) {
retval = -ELIBBAD;
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (!is_elf(&interp_params.hdr, interpreter))
goto error;
interp_params.flags = ELF_FDPIC_FLAG_PRESENT;
/* read the interpreter's program header table */
retval = elf_fdpic_fetch_phdrs(&interp_params, interpreter);
if (retval < 0)
goto error;
}
stack_size = exec_params.stack_size;
if (exec_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (exec_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
if (stack_size == 0) {
stack_size = interp_params.stack_size;
if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
}
retval = -ENOEXEC;
if (stack_size == 0)
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
stack_size = 131072UL; /* same as exec.c's default commit */
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (is_constdisp(&interp_params.hdr))
interp_params.flags |= ELF_FDPIC_FLAG_CONSTDISP;
/* flush all traces of the currently running executable */
retval = flush_old_exec(bprm);
if (retval)
goto error;
/* there's now no turning back... the old userspace image is dead,
* defunct, deceased, etc.
*/
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries The ELF binary loader in binfmt_elf.c requires an MMU, making it impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain ELF, which requires constant displacements between LOAD segments, since it already supports FDPIC ELF files flagged as needing constant displacement. This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on NOMMU archs. They are treated identically to FDPIC ELF files with the constant-displacement flag bit set, except for personality, which must match the ABI of the program being loaded; the PER_LINUX_FDPIC personality controls how the kernel interprets function pointers passed to sigaction. Files that do not set a stack size requirement explicitly are given a default stack size (matching the amount of committed stack the normal ELF loader for MMU archs would give them) rather than being rejected; this is necessary because plain ELF files generally do not declare stack requirements in theit program headers. Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed virtual address is not possible on NOMMU. This patch was developed and tested on J2 (SH2-compatible) but should be usable immediately on all archs where binfmt_elf_fdpic is available. Moreover, by providing dummy definitions of the elf_check_fdpic() and elf_check_const_displacement() macros for archs which lack an FDPIC ABI, it should be possible to enable building of binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF binary support, but I have not yet tested this. The motivation for using binfmt_elf_fdpic.c rather than adapting binfmt_elf.c to NOMMU is that the former already has all the necessary code to work properly on NOMMU and has already received widespread real-world use and testing. I hope this is not controversial. I'm not really happy with having to unset the FDPIC_FUNCPTRS personality bit when loading non-FDPIC ELF. This bit should really reset automatically on execve, since otherwise, executing non-ELF binaries (e.g. bFLT) from an FDPIC process will leave the personality in the wrong state and severely break signal handling. But that's a separate, existing bug and I don't know the right place to fix it. Signed-off-by: Rich Felker <dalias@libc.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Endo <oleg.endo@t-online.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10 06:59:01 +08:00
if (elf_check_fdpic(&exec_params.hdr))
set_personality(PER_LINUX_FDPIC);
else
set_personality(PER_LINUX);
if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
current->personality |= READ_IMPLIES_EXEC;
setup_new_exec(bprm);
set_binfmt(&elf_fdpic_format);
current->mm->start_code = 0;
current->mm->end_code = 0;
current->mm->start_stack = 0;
current->mm->start_data = 0;
current->mm->end_data = 0;
current->mm->context.exec_fdpic_loadmap = 0;
current->mm->context.interp_fdpic_loadmap = 0;
#ifdef CONFIG_MMU
elf_fdpic_arch_lay_out_mm(&exec_params,
&interp_params,
&current->mm->start_stack,
&current->mm->start_brk);
retval = setup_arg_pages(bprm, current->mm->start_stack,
executable_stack);
if (retval < 0)
goto error;
#endif
/* load the executable and interpreter into memory */
retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm,
"executable");
if (retval < 0)
goto error;
if (interpreter_name) {
retval = elf_fdpic_map_file(&interp_params, interpreter,
current->mm, "interpreter");
if (retval < 0) {
printk(KERN_ERR "Unable to load interpreter\n");
goto error;
}
allow_write_access(interpreter);
fput(interpreter);
interpreter = NULL;
}
#ifdef CONFIG_MMU
if (!current->mm->start_brk)
current->mm->start_brk = current->mm->end_data;
current->mm->brk = current->mm->start_brk =
PAGE_ALIGN(current->mm->start_brk);
#else
/* create a stack area and zero-size brk area */
stack_size = (stack_size + PAGE_SIZE - 1) & PAGE_MASK;
if (stack_size < PAGE_SIZE * 2)
stack_size = PAGE_SIZE * 2;
stack_prot = PROT_READ | PROT_WRITE;
if (executable_stack == EXSTACK_ENABLE_X ||
(executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC))
stack_prot |= PROT_EXEC;
current->mm->start_brk = vm_mmap(NULL, 0, stack_size, stack_prot,
MAP_PRIVATE | MAP_ANONYMOUS |
MAP_UNINITIALIZED | MAP_GROWSDOWN,
0);
if (IS_ERR_VALUE(current->mm->start_brk)) {
retval = current->mm->start_brk;
current->mm->start_brk = 0;
goto error;
}
current->mm->brk = current->mm->start_brk;
current->mm->context.end_brk = current->mm->start_brk;
current->mm->start_stack = current->mm->start_brk + stack_size;
#endif
CRED: Make execve() take advantage of copy-on-write credentials Make execve() take advantage of copy-on-write credentials, allowing it to set up the credentials in advance, and then commit the whole lot after the point of no return. This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). The credential bits from struct linux_binprm are, for the most part, replaced with a single credentials pointer (bprm->cred). This means that all the creds can be calculated in advance and then applied at the point of no return with no possibility of failure. I would like to replace bprm->cap_effective with: cap_isclear(bprm->cap_effective) but this seems impossible due to special behaviour for processes of pid 1 (they always retain their parent's capability masks where normally they'd be changed - see cap_bprm_set_creds()). The following sequence of events now happens: (a) At the start of do_execve, the current task's cred_exec_mutex is locked to prevent PTRACE_ATTACH from obsoleting the calculation of creds that we make. (a) prepare_exec_creds() is then called to make a copy of the current task's credentials and prepare it. This copy is then assigned to bprm->cred. This renders security_bprm_alloc() and security_bprm_free() unnecessary, and so they've been removed. (b) The determination of unsafe execution is now performed immediately after (a) rather than later on in the code. The result is stored in bprm->unsafe for future reference. (c) prepare_binprm() is called, possibly multiple times. (i) This applies the result of set[ug]id binaries to the new creds attached to bprm->cred. Personality bit clearance is recorded, but now deferred on the basis that the exec procedure may yet fail. (ii) This then calls the new security_bprm_set_creds(). This should calculate the new LSM and capability credentials into *bprm->cred. This folds together security_bprm_set() and parts of security_bprm_apply_creds() (these two have been removed). Anything that might fail must be done at this point. (iii) bprm->cred_prepared is set to 1. bprm->cred_prepared is 0 on the first pass of the security calculations, and 1 on all subsequent passes. This allows SELinux in (ii) to base its calculations only on the initial script and not on the interpreter. (d) flush_old_exec() is called to commit the task to execution. This performs the following steps with regard to credentials: (i) Clear pdeath_signal and set dumpable on certain circumstances that may not be covered by commit_creds(). (ii) Clear any bits in current->personality that were deferred from (c.i). (e) install_exec_creds() [compute_creds() as was] is called to install the new credentials. This performs the following steps with regard to credentials: (i) Calls security_bprm_committing_creds() to apply any security requirements, such as flushing unauthorised files in SELinux, that must be done before the credentials are changed. This is made up of bits of security_bprm_apply_creds() and security_bprm_post_apply_creds(), both of which have been removed. This function is not allowed to fail; anything that might fail must have been done in (c.ii). (ii) Calls commit_creds() to apply the new credentials in a single assignment (more or less). Possibly pdeath_signal and dumpable should be part of struct creds. (iii) Unlocks the task's cred_replace_mutex, thus allowing PTRACE_ATTACH to take place. (iv) Clears The bprm->cred pointer as the credentials it was holding are now immutable. (v) Calls security_bprm_committed_creds() to apply any security alterations that must be done after the creds have been changed. SELinux uses this to flush signals and signal handlers. (f) If an error occurs before (d.i), bprm_free() will call abort_creds() to destroy the proposed new credentials and will then unlock cred_replace_mutex. No changes to the credentials will have been made. (2) LSM interface. A number of functions have been changed, added or removed: (*) security_bprm_alloc(), ->bprm_alloc_security() (*) security_bprm_free(), ->bprm_free_security() Removed in favour of preparing new credentials and modifying those. (*) security_bprm_apply_creds(), ->bprm_apply_creds() (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds() Removed; split between security_bprm_set_creds(), security_bprm_committing_creds() and security_bprm_committed_creds(). (*) security_bprm_set(), ->bprm_set_security() Removed; folded into security_bprm_set_creds(). (*) security_bprm_set_creds(), ->bprm_set_creds() New. The new credentials in bprm->creds should be checked and set up as appropriate. bprm->cred_prepared is 0 on the first call, 1 on the second and subsequent calls. (*) security_bprm_committing_creds(), ->bprm_committing_creds() (*) security_bprm_committed_creds(), ->bprm_committed_creds() New. Apply the security effects of the new credentials. This includes closing unauthorised files in SELinux. This function may not fail. When the former is called, the creds haven't yet been applied to the process; when the latter is called, they have. The former may access bprm->cred, the latter may not. (3) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) The bprm_security_struct struct has been removed in favour of using the credentials-under-construction approach. (c) flush_unauthorized_files() now takes a cred pointer and passes it on to inode_has_perm(), file_has_perm() and dentry_open(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 07:39:24 +08:00
install_exec_creds(bprm);
if (create_elf_fdpic_tables(bprm, current->mm,
&exec_params, &interp_params) < 0)
goto error;
kdebug("- start_code %lx", current->mm->start_code);
kdebug("- end_code %lx", current->mm->end_code);
kdebug("- start_data %lx", current->mm->start_data);
kdebug("- end_data %lx", current->mm->end_data);
kdebug("- start_brk %lx", current->mm->start_brk);
kdebug("- brk %lx", current->mm->brk);
kdebug("- start_stack %lx", current->mm->start_stack);
#ifdef ELF_FDPIC_PLAT_INIT
/*
* The ABI may specify that certain registers be set up in special
* ways (on i386 %edx is the address of a DT_FINI function, for
* example. This macro performs whatever initialization to
* the regs structure is required.
*/
dynaddr = interp_params.dynamic_addr ?: exec_params.dynamic_addr;
ELF_FDPIC_PLAT_INIT(regs, exec_params.map_addr, interp_params.map_addr,
dynaddr);
#endif
/* everything is now ready... get the userspace context ready to roll */
entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
start_thread(regs, entryaddr, current->mm->start_stack);
retval = 0;
error:
if (interpreter) {
allow_write_access(interpreter);
fput(interpreter);
}
kfree(interpreter_name);
kfree(exec_params.phdrs);
kfree(exec_params.loadmap);
kfree(interp_params.phdrs);
kfree(interp_params.loadmap);
return retval;
}
/*****************************************************************************/
#ifndef ELF_BASE_PLATFORM
/*
* AT_BASE_PLATFORM indicates the "real" hardware/microarchitecture.
* If the arch defines ELF_BASE_PLATFORM (in asm/elf.h), the value
* will be copied to the user stack in the same manner as AT_PLATFORM.
*/
#define ELF_BASE_PLATFORM NULL
#endif
/*
* present useful information to the program by shovelling it onto the new
* process's stack
*/
static int create_elf_fdpic_tables(struct linux_binprm *bprm,
struct mm_struct *mm,
struct elf_fdpic_params *exec_params,
struct elf_fdpic_params *interp_params)
{
const struct cred *cred = current_cred();
unsigned long sp, csp, nitems;
elf_caddr_t __user *argv, *envp;
size_t platform_len = 0, len;
char *k_platform, *k_base_platform;
char __user *u_platform, *u_base_platform, *p;
int loop;
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
int nr; /* reset for each csp adjustment */
#ifdef CONFIG_MMU
/* In some cases (e.g. Hyper-Threading), we want to avoid L1 evictions
* by the processes running on the same package. One thing we can do is
* to shuffle the initial stack for them, so we give the architecture
* an opportunity to do so here.
*/
sp = arch_align_stack(bprm->p);
#else
sp = mm->start_stack;
/* stack the program arguments and environment */
if (elf_fdpic_transfer_args_to_stack(bprm, &sp) < 0)
return -EFAULT;
#endif
/*
* If this architecture has a platform capability string, copy it
* to userspace. In some cases (Sparc), this info is impossible
* for userspace to get any other way, in others (i386) it is
* merely difficult.
*/
k_platform = ELF_PLATFORM;
u_platform = NULL;
if (k_platform) {
platform_len = strlen(k_platform) + 1;
sp -= platform_len;
u_platform = (char __user *) sp;
if (__copy_to_user(u_platform, k_platform, platform_len) != 0)
return -EFAULT;
}
/*
* If this architecture has a "base" platform capability
* string, copy it to userspace.
*/
k_base_platform = ELF_BASE_PLATFORM;
u_base_platform = NULL;
if (k_base_platform) {
platform_len = strlen(k_base_platform) + 1;
sp -= platform_len;
u_base_platform = (char __user *) sp;
if (__copy_to_user(u_base_platform, k_base_platform, platform_len) != 0)
return -EFAULT;
}
sp &= ~7UL;
/* stack the load map(s) */
len = sizeof(struct elf32_fdpic_loadmap);
len += sizeof(struct elf32_fdpic_loadseg) * exec_params->loadmap->nsegs;
sp = (sp - len) & ~7UL;
exec_params->map_addr = sp;
if (copy_to_user((void __user *) sp, exec_params->loadmap, len) != 0)
return -EFAULT;
current->mm->context.exec_fdpic_loadmap = (unsigned long) sp;
if (interp_params->loadmap) {
len = sizeof(struct elf32_fdpic_loadmap);
len += sizeof(struct elf32_fdpic_loadseg) *
interp_params->loadmap->nsegs;
sp = (sp - len) & ~7UL;
interp_params->map_addr = sp;
if (copy_to_user((void __user *) sp, interp_params->loadmap,
len) != 0)
return -EFAULT;
current->mm->context.interp_fdpic_loadmap = (unsigned long) sp;
}
/* force 16 byte _final_ alignment here for generality */
#define DLINFO_ITEMS 15
nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0) +
(k_base_platform ? 1 : 0) + AT_VECTOR_SIZE_ARCH;
if (bprm->interp_flags & BINPRM_FLAGS_EXECFD)
nitems++;
csp = sp;
sp -= nitems * 2 * sizeof(unsigned long);
sp -= (bprm->envc + 1) * sizeof(char *); /* envv[] */
sp -= (bprm->argc + 1) * sizeof(char *); /* argv[] */
sp -= 1 * sizeof(unsigned long); /* argc */
csp -= sp & 15UL;
sp -= sp & 15UL;
/* put the ELF interpreter info on the stack */
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
#define NEW_AUX_ENT(id, val) \
do { \
struct { unsigned long _id, _val; } __user *ent; \
\
ent = (void __user *) csp; \
__put_user((id), &ent[nr]._id); \
__put_user((val), &ent[nr]._val); \
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
nr++; \
} while (0)
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
nr = 0;
csp -= 2 * sizeof(unsigned long);
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
NEW_AUX_ENT(AT_NULL, 0);
if (k_platform) {
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
nr = 0;
csp -= 2 * sizeof(unsigned long);
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
NEW_AUX_ENT(AT_PLATFORM,
(elf_addr_t) (unsigned long) u_platform);
}
if (k_base_platform) {
nr = 0;
csp -= 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_BASE_PLATFORM,
(elf_addr_t) (unsigned long) u_base_platform);
}
if (bprm->interp_flags & BINPRM_FLAGS_EXECFD) {
nr = 0;
csp -= 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_EXECFD, bprm->interp_data);
}
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
nr = 0;
csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
NEW_AUX_ENT(AT_HWCAP, ELF_HWCAP);
#ifdef ELF_HWCAP2
NEW_AUX_ENT(AT_HWCAP2, ELF_HWCAP2);
#endif
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
NEW_AUX_ENT(AT_PAGESZ, PAGE_SIZE);
NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC);
NEW_AUX_ENT(AT_PHDR, exec_params->ph_addr);
NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr));
NEW_AUX_ENT(AT_PHNUM, exec_params->hdr.e_phnum);
NEW_AUX_ENT(AT_BASE, interp_params->elfhdr_addr);
NEW_AUX_ENT(AT_FLAGS, 0);
NEW_AUX_ENT(AT_ENTRY, exec_params->entry_addr);
NEW_AUX_ENT(AT_UID, (elf_addr_t) from_kuid_munged(cred->user_ns, cred->uid));
NEW_AUX_ENT(AT_EUID, (elf_addr_t) from_kuid_munged(cred->user_ns, cred->euid));
NEW_AUX_ENT(AT_GID, (elf_addr_t) from_kgid_munged(cred->user_ns, cred->gid));
NEW_AUX_ENT(AT_EGID, (elf_addr_t) from_kgid_munged(cred->user_ns, cred->egid));
NEW_AUX_ENT(AT_SECURE, security_bprm_secureexec(bprm));
NEW_AUX_ENT(AT_EXECFN, bprm->exec);
#ifdef ARCH_DLINFO
binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: David Howells <dhowells@redhat.com>
2008-05-19 12:34:45 +08:00
nr = 0;
csp -= AT_VECTOR_SIZE_ARCH * 2 * sizeof(unsigned long);
/* ARCH_DLINFO must come last so platform specific code can enforce
* special alignment requirements on the AUXV if necessary (eg. PPC).
*/
ARCH_DLINFO;
#endif
#undef NEW_AUX_ENT
/* allocate room for argv[] and envv[] */
csp -= (bprm->envc + 1) * sizeof(elf_caddr_t);
envp = (elf_caddr_t __user *) csp;
csp -= (bprm->argc + 1) * sizeof(elf_caddr_t);
argv = (elf_caddr_t __user *) csp;
/* stack argc */
csp -= sizeof(unsigned long);
__put_user(bprm->argc, (unsigned long __user *) csp);
BUG_ON(csp != sp);
/* fill in the argv[] array */
#ifdef CONFIG_MMU
current->mm->arg_start = bprm->p;
#else
current->mm->arg_start = current->mm->start_stack -
(MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
#endif
p = (char __user *) current->mm->arg_start;
for (loop = bprm->argc; loop > 0; loop--) {
__put_user((elf_caddr_t) p, argv++);
len = strnlen_user(p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
return -EINVAL;
p += len;
}
__put_user(NULL, argv);
current->mm->arg_end = (unsigned long) p;
/* fill in the envv[] array */
current->mm->env_start = (unsigned long) p;
for (loop = bprm->envc; loop > 0; loop--) {
__put_user((elf_caddr_t)(unsigned long) p, envp++);
len = strnlen_user(p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
return -EINVAL;
p += len;
}
__put_user(NULL, envp);
current->mm->env_end = (unsigned long) p;
mm->start_stack = (unsigned long) sp;
return 0;
}
/*****************************************************************************/
/*
* transfer the program arguments and environment from the holding pages onto
* the stack
*/
#ifndef CONFIG_MMU
static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm,
unsigned long *_sp)
{
unsigned long index, stop, sp;
char *src;
int ret = 0;
stop = bprm->p >> PAGE_SHIFT;
sp = *_sp;
for (index = MAX_ARG_PAGES - 1; index >= stop; index--) {
src = kmap(bprm->page[index]);
sp -= PAGE_SIZE;
if (copy_to_user((void *) sp, src, PAGE_SIZE) != 0)
ret = -EFAULT;
kunmap(bprm->page[index]);
if (ret < 0)
goto out;
}
*_sp = (*_sp - (MAX_ARG_PAGES * PAGE_SIZE - bprm->p)) & ~15;
out:
return ret;
}
#endif
/*****************************************************************************/
/*
* load the appropriate binary image (executable or interpreter) into memory
* - we assume no MMU is available
* - if no other PIC bits are set in params->hdr->e_flags
* - we assume that the LOADable segments in the binary are independently relocatable
* - we assume R/O executable segments are shareable
* - else
* - we assume the loadable parts of the image to require fixed displacement
* - the image is not shareable
*/
static int elf_fdpic_map_file(struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm,
const char *what)
{
struct elf32_fdpic_loadmap *loadmap;
#ifdef CONFIG_MMU
struct elf32_fdpic_loadseg *mseg;
#endif
struct elf32_fdpic_loadseg *seg;
struct elf32_phdr *phdr;
unsigned long load_addr, stop;
unsigned nloads, tmp;
size_t size;
int loop, ret;
/* allocate a load map table */
nloads = 0;
for (loop = 0; loop < params->hdr.e_phnum; loop++)
if (params->phdrs[loop].p_type == PT_LOAD)
nloads++;
if (nloads == 0)
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
load_addr = params->load_addr;
seg = loadmap->segs;
/* map the requested LOADs into the memory space */
switch (params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) {
case ELF_FDPIC_FLAG_CONSTDISP:
case ELF_FDPIC_FLAG_CONTIGUOUS:
#ifndef CONFIG_MMU
ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm);
if (ret < 0)
return ret;
break;
#endif
default:
ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm);
if (ret < 0)
return ret;
break;
}
/* map the entry point */
if (params->hdr.e_entry) {
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (params->hdr.e_entry >= seg->p_vaddr &&
params->hdr.e_entry < seg->p_vaddr + seg->p_memsz) {
params->entry_addr =
(params->hdr.e_entry - seg->p_vaddr) +
seg->addr;
break;
}
}
}
/* determine where the program header table has wound up if mapped */
stop = params->hdr.e_phoff;
stop += params->hdr.e_phnum * sizeof (struct elf_phdr);
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_LOAD)
continue;
if (phdr->p_offset > params->hdr.e_phoff ||
phdr->p_offset + phdr->p_filesz < stop)
continue;
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
phdr->p_vaddr + phdr->p_filesz <=
seg->p_vaddr + seg->p_memsz) {
params->ph_addr =
(phdr->p_vaddr - seg->p_vaddr) +
seg->addr +
params->hdr.e_phoff - phdr->p_offset;
break;
}
}
break;
}
/* determine where the dynamic section has wound up if there is one */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (phdr->p_type != PT_DYNAMIC)
continue;
seg = loadmap->segs;
for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
if (phdr->p_vaddr >= seg->p_vaddr &&
phdr->p_vaddr + phdr->p_memsz <=
seg->p_vaddr + seg->p_memsz) {
params->dynamic_addr =
(phdr->p_vaddr - seg->p_vaddr) +
seg->addr;
/* check the dynamic section contains at least
* one item, and that the last item is a NULL
* entry */
if (phdr->p_memsz == 0 ||
phdr->p_memsz % sizeof(Elf32_Dyn) != 0)
goto dynamic_error;
tmp = phdr->p_memsz / sizeof(Elf32_Dyn);
if (((Elf32_Dyn *)
params->dynamic_addr)[tmp - 1].d_tag != 0)
goto dynamic_error;
break;
}
}
break;
}
/* now elide adjacent segments in the load map on MMU linux
* - on uClinux the holes between may actually be filled with system
* stuff or stuff from other processes
*/
#ifdef CONFIG_MMU
nloads = loadmap->nsegs;
mseg = loadmap->segs;
seg = mseg + 1;
for (loop = 1; loop < nloads; loop++) {
/* see if we have a candidate for merging */
if (seg->p_vaddr - mseg->p_vaddr == seg->addr - mseg->addr) {
load_addr = PAGE_ALIGN(mseg->addr + mseg->p_memsz);
if (load_addr == (seg->addr & PAGE_MASK)) {
mseg->p_memsz +=
load_addr -
(mseg->addr + mseg->p_memsz);
mseg->p_memsz += seg->addr & ~PAGE_MASK;
mseg->p_memsz += seg->p_memsz;
loadmap->nsegs--;
continue;
}
}
mseg++;
if (mseg != seg)
*mseg = *seg;
}
#endif
kdebug("Mapped Object [%s]:", what);
kdebug("- elfhdr : %lx", params->elfhdr_addr);
kdebug("- entry : %lx", params->entry_addr);
kdebug("- PHDR[] : %lx", params->ph_addr);
kdebug("- DYNAMIC[]: %lx", params->dynamic_addr);
seg = loadmap->segs;
for (loop = 0; loop < loadmap->nsegs; loop++, seg++)
kdebug("- LOAD[%d] : %08x-%08x [va=%x ms=%x]",
loop,
seg->addr, seg->addr + seg->p_memsz - 1,
seg->p_vaddr, seg->p_memsz);
return 0;
dynamic_error:
printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n",
what, file_inode(file)->i_ino);
return -ELIBBAD;
}
/*****************************************************************************/
/*
* map a file with constant displacement under uClinux
*/
#ifndef CONFIG_MMU
static int elf_fdpic_map_file_constdisp_on_uclinux(
struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm)
{
struct elf32_fdpic_loadseg *seg;
struct elf32_phdr *phdr;
unsigned long load_addr, base = ULONG_MAX, top = 0, maddr = 0, mflags;
int loop, ret;
load_addr = params->load_addr;
seg = params->loadmap->segs;
/* determine the bounds of the contiguous overall allocation we must
* make */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (params->phdrs[loop].p_type != PT_LOAD)
continue;
if (base > phdr->p_vaddr)
base = phdr->p_vaddr;
if (top < phdr->p_vaddr + phdr->p_memsz)
top = phdr->p_vaddr + phdr->p_memsz;
}
/* allocate one big anon block for everything */
mflags = MAP_PRIVATE;
if (params->flags & ELF_FDPIC_FLAG_EXECUTABLE)
mflags |= MAP_EXECUTABLE;
maddr = vm_mmap(NULL, load_addr, top - base,
PROT_READ | PROT_WRITE | PROT_EXEC, mflags, 0);
if (IS_ERR_VALUE(maddr))
return (int) maddr;
if (load_addr != 0)
load_addr += PAGE_ALIGN(top - base);
/* and then load the file segments into it */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
if (params->phdrs[loop].p_type != PT_LOAD)
continue;
seg->addr = maddr + (phdr->p_vaddr - base);
seg->p_vaddr = phdr->p_vaddr;
seg->p_memsz = phdr->p_memsz;
ret = read_code(file, seg->addr, phdr->p_offset,
phdr->p_filesz);
if (ret < 0)
return ret;
/* map the ELF header address if in this segment */
if (phdr->p_offset == 0)
params->elfhdr_addr = seg->addr;
/* clear any space allocated but not loaded */
if (phdr->p_filesz < phdr->p_memsz) {
if (clear_user((void *) (seg->addr + phdr->p_filesz),
phdr->p_memsz - phdr->p_filesz))
return -EFAULT;
}
if (mm) {
if (phdr->p_flags & PF_X) {
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 15:10:00 +08:00
if (!mm->start_code) {
mm->start_code = seg->addr;
mm->end_code = seg->addr +
phdr->p_memsz;
}
} else if (!mm->start_data) {
mm->start_data = seg->addr;
mm->end_data = seg->addr + phdr->p_memsz;
}
}
seg++;
}
return 0;
}
#endif
/*****************************************************************************/
/*
* map a binary by direct mmap() of the individual PT_LOAD segments
*/
static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
struct file *file,
struct mm_struct *mm)
{
struct elf32_fdpic_loadseg *seg;
struct elf32_phdr *phdr;
unsigned long load_addr, delta_vaddr;
int loop, dvset;
load_addr = params->load_addr;
delta_vaddr = 0;
dvset = 0;
seg = params->loadmap->segs;
/* deal with each load segment separately */
phdr = params->phdrs;
for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
unsigned long maddr, disp, excess, excess1;
int prot = 0, flags;
if (phdr->p_type != PT_LOAD)
continue;
kdebug("[LOAD] va=%lx of=%lx fs=%lx ms=%lx",
(unsigned long) phdr->p_vaddr,
(unsigned long) phdr->p_offset,
(unsigned long) phdr->p_filesz,
(unsigned long) phdr->p_memsz);
/* determine the mapping parameters */
if (phdr->p_flags & PF_R) prot |= PROT_READ;
if (phdr->p_flags & PF_W) prot |= PROT_WRITE;
if (phdr->p_flags & PF_X) prot |= PROT_EXEC;
flags = MAP_PRIVATE | MAP_DENYWRITE;
if (params->flags & ELF_FDPIC_FLAG_EXECUTABLE)
flags |= MAP_EXECUTABLE;
maddr = 0;
switch (params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) {
case ELF_FDPIC_FLAG_INDEPENDENT:
/* PT_LOADs are independently locatable */
break;
case ELF_FDPIC_FLAG_HONOURVADDR:
/* the specified virtual address must be honoured */
maddr = phdr->p_vaddr;
flags |= MAP_FIXED;
break;
case ELF_FDPIC_FLAG_CONSTDISP:
/* constant displacement
* - can be mapped anywhere, but must be mapped as a
* unit
*/
if (!dvset) {
maddr = load_addr;
delta_vaddr = phdr->p_vaddr;
dvset = 1;
} else {
maddr = load_addr + phdr->p_vaddr - delta_vaddr;
flags |= MAP_FIXED;
}
break;
case ELF_FDPIC_FLAG_CONTIGUOUS:
/* contiguity handled later */
break;
default:
BUG();
}
maddr &= PAGE_MASK;
/* create the mapping */
disp = phdr->p_vaddr & ~PAGE_MASK;
maddr = vm_mmap(file, maddr, phdr->p_memsz + disp, prot, flags,
phdr->p_offset - disp);
kdebug("mmap[%d] <file> sz=%lx pr=%x fl=%x of=%lx --> %08lx",
loop, phdr->p_memsz + disp, prot, flags,
phdr->p_offset - disp, maddr);
if (IS_ERR_VALUE(maddr))
return (int) maddr;
if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) ==
ELF_FDPIC_FLAG_CONTIGUOUS)
load_addr += PAGE_ALIGN(phdr->p_memsz + disp);
seg->addr = maddr + disp;
seg->p_vaddr = phdr->p_vaddr;
seg->p_memsz = phdr->p_memsz;
/* map the ELF header address if in this segment */
if (phdr->p_offset == 0)
params->elfhdr_addr = seg->addr;
/* clear the bit between beginning of mapping and beginning of
* PT_LOAD */
if (prot & PROT_WRITE && disp > 0) {
kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
if (clear_user((void __user *) maddr, disp))
return -EFAULT;
maddr += disp;
}
/* clear any space allocated but not loaded
* - on uClinux we can just clear the lot
* - on MMU linux we'll get a SIGBUS beyond the last page
* extant in the file
*/
excess = phdr->p_memsz - phdr->p_filesz;
excess1 = PAGE_SIZE - ((maddr + phdr->p_filesz) & ~PAGE_MASK);
#ifdef CONFIG_MMU
if (excess > excess1) {
unsigned long xaddr = maddr + phdr->p_filesz + excess1;
unsigned long xmaddr;
flags |= MAP_FIXED | MAP_ANONYMOUS;
xmaddr = vm_mmap(NULL, xaddr, excess - excess1,
prot, flags, 0);
kdebug("mmap[%d] <anon>"
" ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx",
loop, xaddr, excess - excess1, prot, flags,
xmaddr);
if (xmaddr != xaddr)
return -ENOMEM;
}
if (prot & PROT_WRITE && excess1 > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess1);
if (clear_user((void __user *) maddr + phdr->p_filesz,
excess1))
return -EFAULT;
}
#else
if (excess > 0) {
kdebug("clear[%d] ad=%lx sz=%lx",
loop, maddr + phdr->p_filesz, excess);
if (clear_user((void *) maddr + phdr->p_filesz, excess))
return -EFAULT;
}
#endif
if (mm) {
if (phdr->p_flags & PF_X) {
[PATCH] FDPIC: fix the /proc/pid/stat representation of executable boundaries Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23 15:10:00 +08:00
if (!mm->start_code) {
mm->start_code = maddr;
mm->end_code = maddr + phdr->p_memsz;
}
} else if (!mm->start_data) {
mm->start_data = maddr;
mm->end_data = maddr + phdr->p_memsz;
}
}
seg++;
}
return 0;
}
/*****************************************************************************/
/*
* ELF-FDPIC core dumper
*
* Modelled on fs/exec.c:aout_core_dump()
* Jeremy Fitzhardinge <jeremy@sw.oz.au>
*
* Modelled on fs/binfmt_elf.c core dumper
*/
#ifdef CONFIG_ELF_CORE
/*
* Decide whether a segment is worth dumping; default is yes to be
* sure (missing info is worse than too much; etc).
* Personally I'd include everything, and use the coredump limit...
*
* I think we should skip something. But I am not sure how. H.J.
*/
static int maydump(struct vm_area_struct *vma, unsigned long mm_flags)
{
int dump_ok;
/* Do not dump I/O mapped devices or special mappings */
mm: kill vma flag VM_RESERVED and mm->reserved_vm counter A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 07:29:02 +08:00
if (vma->vm_flags & VM_IO) {
kdcore("%08lx: %08lx: no (IO)", vma->vm_start, vma->vm_flags);
return 0;
}
/* If we may not read the contents, don't allow us to dump
* them either. "dump_write()" can't handle it anyway.
*/
if (!(vma->vm_flags & VM_READ)) {
kdcore("%08lx: %08lx: no (!read)", vma->vm_start, vma->vm_flags);
return 0;
}
/* support for DAX */
if (vma_is_dax(vma)) {
if (vma->vm_flags & VM_SHARED) {
dump_ok = test_bit(MMF_DUMP_DAX_SHARED, &mm_flags);
kdcore("%08lx: %08lx: %s (DAX shared)", vma->vm_start,
vma->vm_flags, dump_ok ? "yes" : "no");
} else {
dump_ok = test_bit(MMF_DUMP_DAX_PRIVATE, &mm_flags);
kdcore("%08lx: %08lx: %s (DAX private)", vma->vm_start,
vma->vm_flags, dump_ok ? "yes" : "no");
}
return dump_ok;
}
/* By default, dump shared memory if mapped from an anonymous file. */
if (vma->vm_flags & VM_SHARED) {
if (file_inode(vma->vm_file)->i_nlink == 0) {
dump_ok = test_bit(MMF_DUMP_ANON_SHARED, &mm_flags);
kdcore("%08lx: %08lx: %s (share)", vma->vm_start,
vma->vm_flags, dump_ok ? "yes" : "no");
return dump_ok;
}
dump_ok = test_bit(MMF_DUMP_MAPPED_SHARED, &mm_flags);
kdcore("%08lx: %08lx: %s (share)", vma->vm_start,
vma->vm_flags, dump_ok ? "yes" : "no");
return dump_ok;
}
#ifdef CONFIG_MMU
/* By default, if it hasn't been written to, don't write it out */
if (!vma->anon_vma) {
dump_ok = test_bit(MMF_DUMP_MAPPED_PRIVATE, &mm_flags);
kdcore("%08lx: %08lx: %s (!anon)", vma->vm_start,
vma->vm_flags, dump_ok ? "yes" : "no");
return dump_ok;
}
#endif
dump_ok = test_bit(MMF_DUMP_ANON_PRIVATE, &mm_flags);
kdcore("%08lx: %08lx: %s", vma->vm_start, vma->vm_flags,
dump_ok ? "yes" : "no");
return dump_ok;
}
/* An ELF note in memory */
struct memelfnote
{
const char *name;
int type;
unsigned int datasz;
void *data;
};
static int notesize(struct memelfnote *en)
{
int sz;
sz = sizeof(struct elf_note);
sz += roundup(strlen(en->name) + 1, 4);
sz += roundup(en->datasz, 4);
return sz;
}
/* #define DEBUG */
static int writenote(struct memelfnote *men, struct coredump_params *cprm)
coredump: unify dump_seek() implementations for each binfmt_*.c The current ELF dumper can produce broken corefiles if program headers exceed 65535. In particular, the program in 64-bit environment often demands more than 65535 mmaps. If you google max_map_count, then you can find many users facing this problem. Solaris has already dealt with this issue, and other OSes have also adopted the same method as in Solaris. Currently, Sun's document and AMD 64 ABI include the description for the extension, where they call the extension Extended Numbering. See Reference for further information. I believe that linux kernel should adopt the same way as they did, so I've written this patch. I am also preparing for patches of GDB and binutils. How to fix ========== In new dumping process, there are two cases according to weather or not the number of program headers is equal to or more than 65535. - if less than 65535, the produced corefile format is exactly the same as the ordinary one. - if equal to or more than 65535, then e_phnum field is set to newly introduced constant PN_XNUM(0xffff) and the actual number of program headers is set to sh_info field of the section header at index 0. Compatibility Concern ===================== * As already mentioned in Summary, Sun and AMD64 has already adopted this. See Reference. * There are four combinations according to whether kernel and userland tools are respectively modified or not. The next table summarizes shortly for each combination. --------------------------------------------- Original Kernel | Modified Kernel --------------------------------------------- < 65535 | >= 65535 | < 65535 | >= 65535 ------------------------------------------------------------- Original Tools | OK | broken | OK | broken (#) ------------------------------------------------------------- Modified Tools | OK | broken | OK | OK ------------------------------------------------------------- Note that there is no case that `OK' changes to `broken'. (#) Although this case remains broken, O-M behaves better than O-O. That is, while in O-O case e_phnum field would be extremely small due to integer overflow, in O-M case it is guaranteed to be at least 65535 by being set to PN_XNUM(0xFFFF), much closer to the actual correct value than the O-O case. Test Program ============ Here is a test program mkmmaps.c that is useful to produce the corefile with many mmaps. To use this, please take the following steps: $ ulimit -c unlimited $ sysctl vm.max_map_count=70000 # default 65530 is too small $ sysctl fs.file-max=70000 $ mkmmaps 65535 Then, the program will abort and a corefile will be generated. If failed, there are two cases according to the error message displayed. * ``out of memory'' means vm.max_map_count is still smaller * ``too many open files'' means fs.file-max is still smaller So, please change it to a larger value, and then retry it. mkmmaps.c == #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char **argv) { int maps_num; if (argc < 2) { fprintf(stderr, "mkmmaps [number of maps to be created]\n"); exit(1); } if (sscanf(argv[1], "%d", &maps_num) == EOF) { perror("sscanf"); exit(2); } if (maps_num < 0) { fprintf(stderr, "%d is invalid\n", maps_num); exit(3); } for (; maps_num > 0; --maps_num) { if (MAP_FAILED == mmap((void *)NULL, (size_t) 1, PROT_READ, MAP_SHARED | MAP_ANONYMOUS, (int) -1, (off_t) NULL)) { perror("mmap"); exit(4); } } abort(); { char buffer[128]; sprintf(buffer, "wc -l /proc/%u/maps", getpid()); system(buffer); } return 0; } Tested on i386, ia64 and um/sys-i386. Built on sh4 (which covers fs/binfmt_elf_fdpic.c) References ========== - Sun microsystems: Linker and Libraries. Part No: 817-1984-17, September 2008. URL: http://docs.sun.com/app/docs/doc/817-1984 - System V ABI AMD64 Architecture Processor Supplement Draft Version 0.99., May 11, 2009. URL: http://www.x86-64.org/ This patch: There are three different definitions for dump_seek() functions in binfmt_aout.c, binfmt_elf.c and binfmt_elf_fdpic.c, respectively. The only for binfmt_elf.c. My next patch will move dump_seek() into a header file in order to share the same implementations for dump_write() and dump_seek(). As the first step, this patch unify these three definitions for dump_seek() by applying the past commits that have been applied only for binfmt_elf.c. Specifically, the modification made here is part of the following commits: * d025c9db7f31fc0554ce7fb2dfc78d35a77f3487 * 7f14daa19ea36b200d237ad3ac5826ae25360461 This patch does not change a shape of corefiles. Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 05:44:05 +08:00
{
struct elf_note en;
en.n_namesz = strlen(men->name) + 1;
en.n_descsz = men->datasz;
en.n_type = men->type;
return dump_emit(cprm, &en, sizeof(en)) &&
dump_emit(cprm, men->name, en.n_namesz) && dump_align(cprm, 4) &&
dump_emit(cprm, men->data, men->datasz) && dump_align(cprm, 4);
}
static inline void fill_elf_fdpic_header(struct elfhdr *elf, int segs)
{
memcpy(elf->e_ident, ELFMAG, SELFMAG);
elf->e_ident[EI_CLASS] = ELF_CLASS;
elf->e_ident[EI_DATA] = ELF_DATA;
elf->e_ident[EI_VERSION] = EV_CURRENT;
elf->e_ident[EI_OSABI] = ELF_OSABI;
memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
elf->e_type = ET_CORE;
elf->e_machine = ELF_ARCH;
elf->e_version = EV_CURRENT;
elf->e_entry = 0;
elf->e_phoff = sizeof(struct elfhdr);
elf->e_shoff = 0;
elf->e_flags = ELF_FDPIC_CORE_EFLAGS;
elf->e_ehsize = sizeof(struct elfhdr);
elf->e_phentsize = sizeof(struct elf_phdr);
elf->e_phnum = segs;
elf->e_shentsize = 0;
elf->e_shnum = 0;
elf->e_shstrndx = 0;
return;
}
static inline void fill_elf_note_phdr(struct elf_phdr *phdr, int sz, loff_t offset)
{
phdr->p_type = PT_NOTE;
phdr->p_offset = offset;
phdr->p_vaddr = 0;
phdr->p_paddr = 0;
phdr->p_filesz = sz;
phdr->p_memsz = 0;
phdr->p_flags = 0;
phdr->p_align = 0;
return;
}
static inline void fill_note(struct memelfnote *note, const char *name, int type,
unsigned int sz, void *data)
{
note->name = name;
note->type = type;
note->datasz = sz;
note->data = data;
return;
}
/*
* fill up all the fields in prstatus from the given task struct, except
* registers which need to be filled up separately.
*/
static void fill_prstatus(struct elf_prstatus *prstatus,
struct task_struct *p, long signr)
{
prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
rcu_read_lock();
prstatus->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
rcu_read_unlock();
prstatus->pr_pid = task_pid_vnr(p);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
struct task_cputime cputime;
/*
* This is the record for the group leader. It shows the
* group-wide total, not its individual thread total.
*/
thread_group_cputime(p, &cputime);
cputime_to_timeval(cputime.utime, &prstatus->pr_utime);
cputime_to_timeval(cputime.stime, &prstatus->pr_stime);
} else {
cputime_t utime, stime;
task_cputime(p, &utime, &stime);
cputime_to_timeval(utime, &prstatus->pr_utime);
cputime_to_timeval(stime, &prstatus->pr_stime);
}
cputime_to_timeval(p->signal->cutime, &prstatus->pr_cutime);
cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
prstatus->pr_exec_fdpic_loadmap = p->mm->context.exec_fdpic_loadmap;
prstatus->pr_interp_fdpic_loadmap = p->mm->context.interp_fdpic_loadmap;
}
static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
struct mm_struct *mm)
{
const struct cred *cred;
unsigned int i, len;
/* first copy the parameters from user space */
memset(psinfo, 0, sizeof(struct elf_prpsinfo));
len = mm->arg_end - mm->arg_start;
if (len >= ELF_PRARGSZ)
len = ELF_PRARGSZ - 1;
if (copy_from_user(&psinfo->pr_psargs,
(const char __user *) mm->arg_start, len))
return -EFAULT;
for (i = 0; i < len; i++)
if (psinfo->pr_psargs[i] == 0)
psinfo->pr_psargs[i] = ' ';
psinfo->pr_psargs[len] = 0;
rcu_read_lock();
psinfo->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent));
rcu_read_unlock();
psinfo->pr_pid = task_pid_vnr(p);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
i = p->state ? ffz(~p->state) + 1 : 0;
psinfo->pr_state = i;
psinfo->pr_sname = (i > 5) ? '.' : "RSDTZW"[i];
psinfo->pr_zomb = psinfo->pr_sname == 'Z';
psinfo->pr_nice = task_nice(p);
psinfo->pr_flag = p->flags;
rcu_read_lock();
cred = __task_cred(p);
SET_UID(psinfo->pr_uid, from_kuid_munged(cred->user_ns, cred->uid));
SET_GID(psinfo->pr_gid, from_kgid_munged(cred->user_ns, cred->gid));
rcu_read_unlock();
strncpy(psinfo->pr_fname, p->comm, sizeof(psinfo->pr_fname));
return 0;
}
/* Here is the structure in which status of each thread is captured. */
struct elf_thread_status
{
struct list_head list;
struct elf_prstatus prstatus; /* NT_PRSTATUS */
elf_fpregset_t fpu; /* NT_PRFPREG */
struct task_struct *thread;
#ifdef ELF_CORE_COPY_XFPREGS
elf_fpxregset_t xfpu; /* ELF_CORE_XFPREG_TYPE */
#endif
struct memelfnote notes[3];
int num_notes;
};
/*
* In order to add the specific thread information for the elf file format,
* we need to keep a linked list of every thread's pr_status and then create
* a single section for them in the final core file.
*/
static int elf_dump_thread_status(long signr, struct elf_thread_status *t)
{
struct task_struct *p = t->thread;
int sz = 0;
t->num_notes = 0;
fill_prstatus(&t->prstatus, p, signr);
elf_core_copy_task_regs(p, &t->prstatus.pr_reg);
fill_note(&t->notes[0], "CORE", NT_PRSTATUS, sizeof(t->prstatus),
&t->prstatus);
t->num_notes++;
sz += notesize(&t->notes[0]);
t->prstatus.pr_fpvalid = elf_core_copy_task_fpregs(p, NULL, &t->fpu);
if (t->prstatus.pr_fpvalid) {
fill_note(&t->notes[1], "CORE", NT_PRFPREG, sizeof(t->fpu),
&t->fpu);
t->num_notes++;
sz += notesize(&t->notes[1]);
}
#ifdef ELF_CORE_COPY_XFPREGS
if (elf_core_copy_task_xfpregs(p, &t->xfpu)) {
fill_note(&t->notes[2], "LINUX", ELF_CORE_XFPREG_TYPE,
sizeof(t->xfpu), &t->xfpu);
t->num_notes++;
sz += notesize(&t->notes[2]);
}
#endif
return sz;
}
static void fill_extnum_info(struct elfhdr *elf, struct elf_shdr *shdr4extnum,
elf_addr_t e_shoff, int segs)
{
elf->e_shoff = e_shoff;
elf->e_shentsize = sizeof(*shdr4extnum);
elf->e_shnum = 1;
elf->e_shstrndx = SHN_UNDEF;
memset(shdr4extnum, 0, sizeof(*shdr4extnum));
shdr4extnum->sh_type = SHT_NULL;
shdr4extnum->sh_size = elf->e_shnum;
shdr4extnum->sh_link = elf->e_shstrndx;
shdr4extnum->sh_info = segs;
}
/*
* dump the segments for an MMU process
*/
static bool elf_fdpic_dump_segments(struct coredump_params *cprm)
{
struct vm_area_struct *vma;
for (vma = current->mm->mmap; vma; vma = vma->vm_next) {
unsigned long addr;
if (!maydump(vma, cprm->mm_flags))
continue;
#ifdef CONFIG_MMU
for (addr = vma->vm_start; addr < vma->vm_end;
addr += PAGE_SIZE) {
bool res;
struct page *page = get_dump_page(addr);
if (page) {
void *kaddr = kmap(page);
res = dump_emit(cprm, kaddr, PAGE_SIZE);
kunmap(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
} else {
res = dump_skip(cprm, PAGE_SIZE);
}
if (!res)
return false;
}
#else
if (!dump_emit(cprm, (void *) vma->vm_start,
vma->vm_end - vma->vm_start))
return false;
#endif
}
return true;
}
static size_t elf_core_vma_data_size(unsigned long mm_flags)
{
struct vm_area_struct *vma;
size_t size = 0;
for (vma = current->mm->mmap; vma; vma = vma->vm_next)
if (maydump(vma, mm_flags))
size += vma->vm_end - vma->vm_start;
return size;
}
/*
* Actual dumper
*
* This is a two-pass process; first we find the offsets of the bits,
* and then they are actually written out. If we run out of core limit
* we just truncate.
*/
static int elf_fdpic_core_dump(struct coredump_params *cprm)
{
#define NUM_NOTES 6
int has_dumped = 0;
mm_segment_t fs;
int segs;
int i;
struct vm_area_struct *vma;
struct elfhdr *elf = NULL;
loff_t offset = 0, dataoff;
int numnote;
struct memelfnote *notes = NULL;
struct elf_prstatus *prstatus = NULL; /* NT_PRSTATUS */
struct elf_prpsinfo *psinfo = NULL; /* NT_PRPSINFO */
LIST_HEAD(thread_list);
struct list_head *t;
elf_fpregset_t *fpu = NULL;
#ifdef ELF_CORE_COPY_XFPREGS
elf_fpxregset_t *xfpu = NULL;
#endif
int thread_status_size = 0;
elf_addr_t *auxv;
struct elf_phdr *phdr4note = NULL;
struct elf_shdr *shdr4extnum = NULL;
Elf_Half e_phnum;
elf_addr_t e_shoff;
struct core_thread *ct;
struct elf_thread_status *tmp;
/*
* We no longer stop all VM operations.
*
* This is because those proceses that could possibly change map_count
* or the mmap / vma pages are now blocked in do_exit on current
* finishing this core dump.
*
* Only ptrace can touch these memory addresses, but it doesn't change
* the map_count or the pages allocated. So no possibility of crashing
* exists while dumping the mm->vm_next areas to the core file.
*/
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
goto cleanup;
prstatus = kzalloc(sizeof(*prstatus), GFP_KERNEL);
if (!prstatus)
goto cleanup;
psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
if (!psinfo)
goto cleanup;
notes = kmalloc(NUM_NOTES * sizeof(struct memelfnote), GFP_KERNEL);
if (!notes)
goto cleanup;
fpu = kmalloc(sizeof(*fpu), GFP_KERNEL);
if (!fpu)
goto cleanup;
#ifdef ELF_CORE_COPY_XFPREGS
xfpu = kmalloc(sizeof(*xfpu), GFP_KERNEL);
if (!xfpu)
goto cleanup;
#endif
for (ct = current->mm->core_state->dumper.next;
ct; ct = ct->next) {
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
goto cleanup;
tmp->thread = ct->task;
list_add(&tmp->list, &thread_list);
}
list_for_each(t, &thread_list) {
struct elf_thread_status *tmp;
int sz;
tmp = list_entry(t, struct elf_thread_status, list);
sz = elf_dump_thread_status(cprm->siginfo->si_signo, tmp);
thread_status_size += sz;
}
/* now collect the dump for the current */
fill_prstatus(prstatus, current, cprm->siginfo->si_signo);
elf_core_copy_regs(&prstatus->pr_reg, cprm->regs);
segs = current->mm->map_count;
segs += elf_core_extra_phdrs();
/* for notes section */
segs++;
/* If segs > PN_XNUM(0xffff), then e_phnum overflows. To avoid
* this, kernel supports extended numbering. Have a look at
* include/linux/elf.h for further information. */
e_phnum = segs > PN_XNUM ? PN_XNUM : segs;
/* Set up header */
fill_elf_fdpic_header(elf, e_phnum);
has_dumped = 1;
/*
* Set up the notes in similar form to SVR4 core dumps made
* with info from their /proc.
*/
fill_note(notes + 0, "CORE", NT_PRSTATUS, sizeof(*prstatus), prstatus);
fill_psinfo(psinfo, current->group_leader, current->mm);
fill_note(notes + 1, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
numnote = 2;
auxv = (elf_addr_t *) current->mm->saved_auxv;
i = 0;
do
i += 2;
while (auxv[i - 2] != AT_NULL);
fill_note(&notes[numnote++], "CORE", NT_AUXV,
i * sizeof(elf_addr_t), auxv);
/* Try to dump the FPU. */
if ((prstatus->pr_fpvalid =
elf_core_copy_task_fpregs(current, cprm->regs, fpu)))
fill_note(notes + numnote++,
"CORE", NT_PRFPREG, sizeof(*fpu), fpu);
#ifdef ELF_CORE_COPY_XFPREGS
if (elf_core_copy_task_xfpregs(current, xfpu))
fill_note(notes + numnote++,
"LINUX", ELF_CORE_XFPREG_TYPE, sizeof(*xfpu), xfpu);
#endif
fs = get_fs();
set_fs(KERNEL_DS);
offset += sizeof(*elf); /* Elf header */
offset += segs * sizeof(struct elf_phdr); /* Program headers */
/* Write notes phdr entry */
{
int sz = 0;
for (i = 0; i < numnote; i++)
sz += notesize(notes + i);
sz += thread_status_size;
phdr4note = kmalloc(sizeof(*phdr4note), GFP_KERNEL);
if (!phdr4note)
goto end_coredump;
fill_elf_note_phdr(phdr4note, sz, offset);
offset += sz;
}
/* Page-align dumped data */
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
offset += elf_core_vma_data_size(cprm->mm_flags);
offset += elf_core_extra_data_size();
e_shoff = offset;
if (e_phnum == PN_XNUM) {
shdr4extnum = kmalloc(sizeof(*shdr4extnum), GFP_KERNEL);
if (!shdr4extnum)
goto end_coredump;
fill_extnum_info(elf, shdr4extnum, e_shoff, segs);
}
offset = dataoff;
if (!dump_emit(cprm, elf, sizeof(*elf)))
goto end_coredump;
if (!dump_emit(cprm, phdr4note, sizeof(*phdr4note)))
goto end_coredump;
/* write program headers for segments dump */
NOMMU: Make VMAs per MM as for MMU-mode linux Make VMAs per mm_struct as for MMU-mode linux. This solves two problems: (1) In SYSV SHM where nattch for a segment does not reflect the number of shmat's (and forks) done. (2) In mmap() where the VMA's vm_mm is set to point to the parent mm by an exec'ing process when VM_EXECUTABLE is specified, regardless of the fact that a VMA might be shared and already have its vm_mm assigned to another process or a dead process. A new struct (vm_region) is introduced to track a mapped region and to remember the circumstances under which it may be shared and the vm_list_struct structure is discarded as it's no longer required. This patch makes the following additional changes: (1) Regions are now allocated with alloc_pages() rather than kmalloc() and with no recourse to __GFP_COMP, so the pages are not composite. Instead, each page has a reference on it held by the region. Anything else that is interested in such a page will have to get a reference on it to retain it. When the pages are released due to unmapping, each page is passed to put_page() and will be freed when the page usage count reaches zero. (2) Excess pages are trimmed after an allocation as the allocation must be made as a power-of-2 quantity of pages. (3) VMAs are added to the parent MM's R/B tree and mmap lists. As an MM may end up with overlapping VMAs within the tree, the VMA struct address is appended to the sort key. (4) Non-anonymous VMAs are now added to the backing inode's prio list. (5) Holes may be punched in anonymous VMAs with munmap(), releasing parts of the backing region. The VMA and region structs will be split if necessary. (6) sys_shmdt() only releases one attachment to a SYSV IPC shared memory segment instead of all the attachments at that addresss. Multiple shmat()'s return the same address under NOMMU-mode instead of different virtual addresses as under MMU-mode. (7) Core dumping for ELF-FDPIC requires fewer exceptions for NOMMU-mode. (8) /proc/maps is now the global list of mapped regions, and may list bits that aren't actually mapped anywhere. (9) /proc/meminfo gains a line (tagged "MmapCopy") that indicates the amount of RAM currently allocated by mmap to hold mappable regions that can't be mapped directly. These are copies of the backing device or file if not anonymous. These changes make NOMMU mode more similar to MMU mode. The downside is that NOMMU mode requires some extra memory to track things over NOMMU without this patch (VMAs are no longer shared, and there are now region structs). Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
2009-01-08 20:04:47 +08:00
for (vma = current->mm->mmap; vma; vma = vma->vm_next) {
struct elf_phdr phdr;
size_t sz;
sz = vma->vm_end - vma->vm_start;
phdr.p_type = PT_LOAD;
phdr.p_offset = offset;
phdr.p_vaddr = vma->vm_start;
phdr.p_paddr = 0;
phdr.p_filesz = maydump(vma, cprm->mm_flags) ? sz : 0;
phdr.p_memsz = sz;
offset += phdr.p_filesz;
phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
if (vma->vm_flags & VM_WRITE)
phdr.p_flags |= PF_W;
if (vma->vm_flags & VM_EXEC)
phdr.p_flags |= PF_X;
phdr.p_align = ELF_EXEC_PAGESIZE;
if (!dump_emit(cprm, &phdr, sizeof(phdr)))
goto end_coredump;
}
if (!elf_core_write_extra_phdrs(cprm, offset))
goto end_coredump;
/* write out the notes section */
for (i = 0; i < numnote; i++)
if (!writenote(notes + i, cprm))
goto end_coredump;
/* write out the thread status notes section */
list_for_each(t, &thread_list) {
struct elf_thread_status *tmp =
list_entry(t, struct elf_thread_status, list);
for (i = 0; i < tmp->num_notes; i++)
if (!writenote(&tmp->notes[i], cprm))
goto end_coredump;
}
if (!dump_skip(cprm, dataoff - cprm->written))
goto end_coredump;
if (!elf_fdpic_dump_segments(cprm))
goto end_coredump;
if (!elf_core_write_extra_data(cprm))
goto end_coredump;
if (e_phnum == PN_XNUM) {
if (!dump_emit(cprm, shdr4extnum, sizeof(*shdr4extnum)))
goto end_coredump;
}
if (cprm->file->f_pos != offset) {
/* Sanity check */
printk(KERN_WARNING
"elf_core_dump: file->f_pos (%lld) != offset (%lld)\n",
cprm->file->f_pos, offset);
}
end_coredump:
set_fs(fs);
cleanup:
while (!list_empty(&thread_list)) {
struct list_head *tmp = thread_list.next;
list_del(tmp);
kfree(list_entry(tmp, struct elf_thread_status, list));
}
kfree(phdr4note);
kfree(elf);
kfree(prstatus);
kfree(psinfo);
kfree(notes);
kfree(fpu);
kfree(shdr4extnum);
#ifdef ELF_CORE_COPY_XFPREGS
kfree(xfpu);
#endif
return has_dumped;
#undef NUM_NOTES
}
#endif /* CONFIG_ELF_CORE */