License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2015-11-06 10:49:43 +08:00
|
|
|
* Memory Migration functionality - linux/mm/migrate.c
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Silicon Graphics, Inc., Christoph Lameter
|
|
|
|
*
|
|
|
|
* Page migration was first developed in the context of the memory hotplug
|
|
|
|
* project. The main authors of the migration code are:
|
|
|
|
*
|
|
|
|
* IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
|
|
|
|
* Hirokazu Takahashi <taka@valinux.co.jp>
|
|
|
|
* Dave Hansen <haveblue@us.ibm.com>
|
2008-07-05 00:59:22 +08:00
|
|
|
* Christoph Lameter
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/migrate.h>
|
2011-10-16 14:01:52 +08:00
|
|
|
#include <linux/export.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/swap.h>
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
#include <linux/swapops.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/pagemap.h>
|
2006-04-11 13:52:57 +08:00
|
|
|
#include <linux/buffer_head.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/mm_inline.h>
|
2007-10-19 14:40:14 +08:00
|
|
|
#include <linux/nsproxy.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/pagevec.h>
|
ksm: rmap_walk to remove_migation_ptes
A side-effect of making ksm pages swappable is that they have to be placed
on the LRUs: which then exposes them to isolate_lru_page() and hence to
page migration.
Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and
rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some
consolidation with existing code is possible, but don't attempt that yet
(try_to_unmap needs to handle nonlinears, but migration pte removal does
not).
rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like
remove_anon_migration_ptes() which it replaces, avoids calling
page_lock_anon_vma(), because that includes a page_mapped() test which
fails when all migration ptes are in place. That was valid when NUMA page
migration was introduced (holding mmap_sem provided the missing guarantee
that anon_vma's slab had not already been destroyed), but I believe not
valid in the memory hotremove case added since.
For now do the same as before, and consider the best way to fix that
unlikely race later on. When fixed, we can probably use rmap_walk() on
hwpoisoned ksm pages too: for now, they remain among hwpoison's various
exceptions (its PageKsm test comes before the page is locked, but its
page_lock_anon_vma fails safely if an anon gets upgraded).
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 09:59:31 +08:00
|
|
|
#include <linux/ksm.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
#include <linux/rmap.h>
|
|
|
|
#include <linux/topology.h>
|
|
|
|
#include <linux/cpu.h>
|
|
|
|
#include <linux/cpuset.h>
|
2006-06-23 17:03:38 +08:00
|
|
|
#include <linux/writeback.h>
|
2006-06-23 17:03:55 +08:00
|
|
|
#include <linux/mempolicy.h>
|
|
|
|
#include <linux/vmalloc.h>
|
2006-06-23 17:04:02 +08:00
|
|
|
#include <linux/security.h>
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
#include <linux/backing-dev.h>
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
#include <linux/compaction.h>
|
2008-07-24 12:27:02 +08:00
|
|
|
#include <linux/syscalls.h>
|
2018-03-17 23:08:03 +08:00
|
|
|
#include <linux/compat.h>
|
2010-09-08 09:19:35 +08:00
|
|
|
#include <linux/hugetlb.h>
|
2012-08-01 07:42:27 +08:00
|
|
|
#include <linux/hugetlb_cgroup.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/gfp.h>
|
2017-09-09 07:12:24 +08:00
|
|
|
#include <linux/pfn_t.h>
|
2017-09-09 07:12:17 +08:00
|
|
|
#include <linux/memremap.h>
|
2017-09-09 07:12:21 +08:00
|
|
|
#include <linux/userfaultfd_k.h>
|
2012-12-12 08:02:42 +08:00
|
|
|
#include <linux/balloon_compaction.h>
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 06:35:45 +08:00
|
|
|
#include <linux/page_idle.h>
|
2016-03-16 05:56:15 +08:00
|
|
|
#include <linux/page_owner.h>
|
2017-02-09 01:51:29 +08:00
|
|
|
#include <linux/sched/mm.h>
|
2017-08-21 04:26:27 +08:00
|
|
|
#include <linux/ptrace.h>
|
2020-01-31 14:14:44 +08:00
|
|
|
#include <linux/oom.h>
|
2021-09-03 05:59:09 +08:00
|
|
|
#include <linux/memory.h>
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
#include <linux/random.h>
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
#include <linux/sched/sysctl.h>
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2010-12-22 09:24:26 +08:00
|
|
|
#include <asm/tlbflush.h>
|
|
|
|
|
2012-10-19 21:07:31 +08:00
|
|
|
#include <trace/events/migrate.h>
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
#include "internal.h"
|
|
|
|
|
2017-02-25 06:57:29 +08:00
|
|
|
int isolate_movable_page(struct page *page, isolate_mode_t mode)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Avoid burning cycles with pages that are yet under __free_pages(),
|
|
|
|
* or just got freed under us.
|
|
|
|
*
|
|
|
|
* In case we 'win' a race for a movable page being freed under us and
|
|
|
|
* raise its refcount preventing __free_pages() from doing its job
|
|
|
|
* the put_page() at the end of this block will take care of
|
|
|
|
* release this page, thus avoiding a nasty leakage.
|
|
|
|
*/
|
|
|
|
if (unlikely(!get_page_unless_zero(page)))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check PageMovable before holding a PG_lock because page's owner
|
|
|
|
* assumes anybody doesn't touch PG_lock of newly allocated page
|
2019-03-06 07:46:22 +08:00
|
|
|
* so unconditionally grabbing the lock ruins page's owner side.
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
*/
|
|
|
|
if (unlikely(!__PageMovable(page)))
|
|
|
|
goto out_putpage;
|
|
|
|
/*
|
|
|
|
* As movable pages are not isolated from LRU lists, concurrent
|
|
|
|
* compaction threads can race against page migration functions
|
|
|
|
* as well as race against the releasing a page.
|
|
|
|
*
|
|
|
|
* In order to avoid having an already isolated movable page
|
|
|
|
* being (wrongly) re-isolated while it is under migration,
|
|
|
|
* or to avoid attempting to isolate pages being released,
|
|
|
|
* lets be sure we have the page lock
|
|
|
|
* before proceeding with the movable page isolation steps.
|
|
|
|
*/
|
|
|
|
if (unlikely(!trylock_page(page)))
|
|
|
|
goto out_putpage;
|
|
|
|
|
|
|
|
if (!PageMovable(page) || PageIsolated(page))
|
|
|
|
goto out_no_isolated;
|
|
|
|
|
|
|
|
mapping = page_mapping(page);
|
|
|
|
VM_BUG_ON_PAGE(!mapping, page);
|
|
|
|
|
|
|
|
if (!mapping->a_ops->isolate_page(page, mode))
|
|
|
|
goto out_no_isolated;
|
|
|
|
|
|
|
|
/* Driver shouldn't use PG_isolated bit of page->flags */
|
|
|
|
WARN_ON_ONCE(PageIsolated(page));
|
2022-03-23 05:46:08 +08:00
|
|
|
SetPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
unlock_page(page);
|
|
|
|
|
2017-02-25 06:57:29 +08:00
|
|
|
return 0;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
|
|
|
out_no_isolated:
|
|
|
|
unlock_page(page);
|
|
|
|
out_putpage:
|
|
|
|
put_page(page);
|
|
|
|
out:
|
2017-02-25 06:57:29 +08:00
|
|
|
return -EBUSY;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
2021-05-05 09:37:04 +08:00
|
|
|
static void putback_movable_page(struct page *page)
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping;
|
|
|
|
|
|
|
|
mapping = page_mapping(page);
|
|
|
|
mapping->a_ops->putback_page(page);
|
2022-03-23 05:46:08 +08:00
|
|
|
ClearPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
2012-12-12 08:02:47 +08:00
|
|
|
/*
|
|
|
|
* Put previously isolated pages back onto the appropriate lists
|
|
|
|
* from where they were once taken off for compaction/migration.
|
|
|
|
*
|
2014-01-22 07:51:17 +08:00
|
|
|
* This function shall be used whenever the isolated pageset has been
|
|
|
|
* built from lru, balloon, hugetlbfs page. See isolate_migratepages_range()
|
|
|
|
* and isolate_huge_page().
|
2012-12-12 08:02:47 +08:00
|
|
|
*/
|
|
|
|
void putback_movable_pages(struct list_head *l)
|
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
struct page *page2;
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
list_for_each_entry_safe(page, page2, l, lru) {
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:21:59 +08:00
|
|
|
if (unlikely(PageHuge(page))) {
|
|
|
|
putback_active_hugepage(page);
|
|
|
|
continue;
|
|
|
|
}
|
2006-06-23 17:03:51 +08:00
|
|
|
list_del(&page->lru);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
/*
|
|
|
|
* We isolated non-lru movable page so here we can use
|
|
|
|
* __PageMovable because LRU page's mapping cannot have
|
|
|
|
* PAGE_MAPPING_MOVABLE.
|
|
|
|
*/
|
2016-07-27 06:23:09 +08:00
|
|
|
if (unlikely(__PageMovable(page))) {
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
VM_BUG_ON_PAGE(!PageIsolated(page), page);
|
|
|
|
lock_page(page);
|
|
|
|
if (PageMovable(page))
|
|
|
|
putback_movable_page(page);
|
|
|
|
else
|
2022-03-23 05:46:08 +08:00
|
|
|
ClearPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
unlock_page(page);
|
|
|
|
put_page(page);
|
|
|
|
} else {
|
2017-09-09 07:11:12 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
|
2020-08-15 08:30:37 +08:00
|
|
|
page_is_file_lru(page), -thp_nr_pages(page));
|
2017-04-21 05:37:46 +08:00
|
|
|
putback_lru_page(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
/*
|
|
|
|
* Restore a potential migration pte to a working pte entry
|
|
|
|
*/
|
2022-01-30 05:06:53 +08:00
|
|
|
static bool remove_migration_pte(struct folio *folio,
|
|
|
|
struct vm_area_struct *vma, unsigned long addr, void *old)
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
DEFINE_FOLIO_VMA_WALK(pvmw, old, vma, addr, PVMW_SYNC | PVMW_MIGRATION);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
while (page_vma_mapped_walk(&pvmw)) {
|
2022-01-29 12:32:59 +08:00
|
|
|
pte_t pte;
|
|
|
|
swp_entry_t entry;
|
|
|
|
struct page *new;
|
|
|
|
unsigned long idx = 0;
|
|
|
|
|
|
|
|
/* pgoff is invalid for ksm pages, but they are never large */
|
|
|
|
if (folio_test_large(folio) && !folio_test_hugetlb(folio))
|
|
|
|
idx = linear_page_index(vma, pvmw.address) - pvmw.pgoff;
|
|
|
|
new = folio_page(folio, idx);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-09-09 07:10:57 +08:00
|
|
|
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
|
|
|
|
/* PMD-mapped THP migration entry */
|
|
|
|
if (!pvmw.pte) {
|
2022-01-29 12:32:59 +08:00
|
|
|
VM_BUG_ON_FOLIO(folio_test_hugetlb(folio) ||
|
|
|
|
!folio_test_pmd_mappable(folio), folio);
|
2017-09-09 07:10:57 +08:00
|
|
|
remove_migration_pmd(&pvmw, new);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2022-01-29 12:32:59 +08:00
|
|
|
folio_get(folio);
|
2017-02-25 06:58:16 +08:00
|
|
|
pte = pte_mkold(mk_pte(new, READ_ONCE(vma->vm_page_prot)));
|
|
|
|
if (pte_swp_soft_dirty(*pvmw.pte))
|
|
|
|
pte = pte_mksoft_dirty(pte);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
/*
|
|
|
|
* Recheck VMA as permissions can change since migration started
|
|
|
|
*/
|
|
|
|
entry = pte_to_swp_entry(*pvmw.pte);
|
2021-07-01 09:54:09 +08:00
|
|
|
if (is_writable_migration_entry(entry))
|
2017-02-25 06:58:16 +08:00
|
|
|
pte = maybe_mkwrite(pte, vma);
|
2020-04-07 11:06:01 +08:00
|
|
|
else if (pte_swp_uffd_wp(*pvmw.pte))
|
|
|
|
pte = pte_mkuffd_wp(pte);
|
2014-10-03 02:47:41 +08:00
|
|
|
|
2020-09-05 07:36:04 +08:00
|
|
|
if (unlikely(is_device_private_page(new))) {
|
2021-07-01 09:54:09 +08:00
|
|
|
if (pte_write(pte))
|
|
|
|
entry = make_writable_device_private_entry(
|
|
|
|
page_to_pfn(new));
|
|
|
|
else
|
|
|
|
entry = make_readable_device_private_entry(
|
|
|
|
page_to_pfn(new));
|
2020-09-05 07:36:04 +08:00
|
|
|
pte = swp_entry_to_pte(entry);
|
2020-09-05 07:36:07 +08:00
|
|
|
if (pte_swp_soft_dirty(*pvmw.pte))
|
|
|
|
pte = pte_swp_mksoft_dirty(pte);
|
2020-09-05 07:36:04 +08:00
|
|
|
if (pte_swp_uffd_wp(*pvmw.pte))
|
|
|
|
pte = pte_swp_mkuffd_wp(pte);
|
2019-03-29 11:44:28 +08:00
|
|
|
}
|
2017-09-09 07:12:17 +08:00
|
|
|
|
2010-10-11 22:03:21 +08:00
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:48:00 +08:00
|
|
|
unsigned int shift = huge_page_shift(hstate_vma(vma));
|
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
pte = pte_mkhuge(pte);
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 09:48:00 +08:00
|
|
|
pte = arch_make_huge_pte(pte, shift, vma->vm_flags);
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_anon(folio))
|
2017-02-25 06:58:16 +08:00
|
|
|
hugepage_add_anon_rmap(new, vma, pvmw.address);
|
|
|
|
else
|
|
|
|
page_dup_rmap(new, true);
|
2022-01-15 06:06:29 +08:00
|
|
|
set_huge_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
|
2017-07-07 06:38:41 +08:00
|
|
|
} else
|
|
|
|
#endif
|
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
if (folio_test_anon(folio))
|
2017-07-07 06:38:41 +08:00
|
|
|
page_add_anon_rmap(new, vma, pvmw.address, false);
|
|
|
|
else
|
mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
inline functions which check (vma->vm_flags & VM_LOCKED) before calling
mlock_page() and munlock_page() in mm/mlock.c.
Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
because we have understandable difficulty in accounting pte maps of THPs,
and if passed a PageHead page, mlock_page() and munlock_page() cannot
tell whether it's a pmd map to be counted or a pte map to be ignored.
Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the
others, and use that to call mlock_vma_page() at the end of the page
adds, and munlock_vma_page() at the end of page_remove_rmap() (end or
beginning? unimportant, but end was easier for assertions in testing).
No page lock is required (although almost all adds happen to hold it):
delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s.
Certainly page lock did serialize with page migration, but I'm having
difficulty explaining why that was ever important.
Mlock accounting on THPs has been hard to define, differed between anon
and file, involved PageDoubleMap in some places and not others, required
clear_page_mlock() at some points. Keep it simple now: just count the
pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
page_add_new_anon_rmap() callers unchanged: they have long been calling
lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED
handling (it also checks for not VM_SPECIAL: I think that's overcautious,
and inconsistent with other checks, that mmap_region() already prevents
VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 10:26:39 +08:00
|
|
|
page_add_file_rmap(new, vma, false);
|
2022-01-15 06:06:29 +08:00
|
|
|
set_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
|
2017-07-07 06:38:41 +08:00
|
|
|
}
|
2022-02-15 10:38:47 +08:00
|
|
|
if (vma->vm_flags & VM_LOCKED)
|
2022-04-02 02:28:33 +08:00
|
|
|
mlock_page_drain_local();
|
mm, thp: fix mlocking THP page with migration enabled
A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.
If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.
We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.
Introduction of THP migration breaks[1] the rules around mlocking THP
pages. If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.
For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().
Anon THP pages can only be shared between processes via fork(). Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().
For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page. PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.
Test-case:
#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>
int main(void)
{
unsigned long nodemask = 4;
void *addr;
addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);
if (fork()) {
wait(NULL);
return 0;
}
mlock(addr, 4UL << 10);
mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
&nodemask, 4, MPOL_MF_MOVE);
return 0;
}
[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com
Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-06 06:51:41 +08:00
|
|
|
|
2022-03-25 09:10:01 +08:00
|
|
|
trace_remove_migration_pte(pvmw.address, pte_val(pte),
|
|
|
|
compound_order(new));
|
|
|
|
|
2017-02-25 06:58:16 +08:00
|
|
|
/* No need to invalidate - it was non-present before */
|
|
|
|
update_mmu_cache(vma, pvmw.address, pvmw.pte);
|
|
|
|
}
|
2015-11-06 10:49:37 +08:00
|
|
|
|
2017-05-04 05:54:27 +08:00
|
|
|
return true;
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
/*
|
|
|
|
* Get rid of all migration entries and replace them by
|
|
|
|
* references to the indicated page.
|
|
|
|
*/
|
2022-01-29 12:32:59 +08:00
|
|
|
void remove_migration_ptes(struct folio *src, struct folio *dst, bool locked)
|
2006-06-23 17:03:38 +08:00
|
|
|
{
|
2014-01-22 07:49:48 +08:00
|
|
|
struct rmap_walk_control rwc = {
|
|
|
|
.rmap_one = remove_migration_pte,
|
2022-01-29 12:32:59 +08:00
|
|
|
.arg = src,
|
2014-01-22 07:49:48 +08:00
|
|
|
};
|
|
|
|
|
2016-03-18 05:20:07 +08:00
|
|
|
if (locked)
|
2022-01-30 05:06:53 +08:00
|
|
|
rmap_walk_locked(dst, &rwc);
|
2016-03-18 05:20:07 +08:00
|
|
|
else
|
2022-01-30 05:06:53 +08:00
|
|
|
rmap_walk(dst, &rwc);
|
2006-06-23 17:03:38 +08:00
|
|
|
}
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
/*
|
|
|
|
* Something used the pte of a page under migration. We need to
|
|
|
|
* get to the page and wait until migration is finished.
|
|
|
|
* When we return from this function the fault will be retried.
|
|
|
|
*/
|
mm/hugetlb: take page table lock in follow_huge_pmd()
We have a race condition between move_pages() and freeing hugepages, where
move_pages() calls follow_page(FOLL_GET) for hugepages internally and
tries to get its refcount without preventing concurrent freeing. This
race crashes the kernel, so this patch fixes it by moving FOLL_GET code
for hugepages into follow_huge_pmd() with taking the page table lock.
This patch intentionally removes page==NULL check after pte_page.
This is justified because pte_page() never returns NULL for any
architectures or configurations.
This patch changes the behavior of follow_huge_pmd() for tail pages and
then tail pages can be pinned/returned. So the caller must be changed to
properly handle the returned tail pages.
We could have a choice to add the similar locking to
follow_huge_(addr|pud) for consistency, but it's not necessary because
currently these functions don't support FOLL_GET flag, so let's leave it
for future development.
Here is the reproducer:
$ cat movepages.c
#include <stdio.h>
#include <stdlib.h>
#include <numaif.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
#define PS 0x1000
int main(int argc, char *argv[]) {
int i;
int nr_hp = strtol(argv[1], NULL, 0);
int nr_p = nr_hp * HPS / PS;
int ret;
void **addrs;
int *status;
int *nodes;
pid_t pid;
pid = strtol(argv[2], NULL, 0);
addrs = malloc(sizeof(char *) * nr_p + 1);
status = malloc(sizeof(char *) * nr_p + 1);
nodes = malloc(sizeof(char *) * nr_p + 1);
while (1) {
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 1;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
for (i = 0; i < nr_p; i++) {
addrs[i] = (void *)ADDR_INPUT + i * PS;
nodes[i] = 0;
status[i] = 0;
}
ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
MPOL_MF_MOVE_ALL);
if (ret == -1)
err("move_pages");
}
return 0;
}
$ cat hugepage.c
#include <stdio.h>
#include <sys/mman.h>
#include <string.h>
#define ADDR_INPUT 0x700000000000UL
#define HPS 0x200000
int main(int argc, char *argv[]) {
int nr_hp = strtol(argv[1], NULL, 0);
char *p;
while (1) {
p = mmap((void *)ADDR_INPUT, nr_hp * HPS, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (p != (void *)ADDR_INPUT) {
perror("mmap");
break;
}
memset(p, 0, nr_hp * HPS);
munmap(p, nr_hp * HPS);
}
}
$ sysctl vm.nr_hugepages=40
$ ./hugepage 10 &
$ ./movepages 10 $(pgrep -f hugepage)
Fixes: e632a938d914 ("mm: migrate: add hugepage migration code to move_pages()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:25:22 +08:00
|
|
|
void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep,
|
2013-06-13 05:05:04 +08:00
|
|
|
spinlock_t *ptl)
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
{
|
2013-06-13 05:05:04 +08:00
|
|
|
pte_t pte;
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
swp_entry_t entry;
|
|
|
|
|
2013-06-13 05:05:04 +08:00
|
|
|
spin_lock(ptl);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
pte = *ptep;
|
|
|
|
if (!is_swap_pte(pte))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
entry = pte_to_swp_entry(pte);
|
|
|
|
if (!is_migration_entry(entry))
|
|
|
|
goto out;
|
|
|
|
|
2022-01-22 14:10:46 +08:00
|
|
|
migration_entry_wait_on_locked(entry, ptep, ptl);
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:35 +08:00
|
|
|
return;
|
|
|
|
out:
|
|
|
|
pte_unmap_unlock(ptep, ptl);
|
|
|
|
}
|
|
|
|
|
2013-06-13 05:05:04 +08:00
|
|
|
void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl = pte_lockptr(mm, pmd);
|
|
|
|
pte_t *ptep = pte_offset_map(pmd, address);
|
|
|
|
__migration_entry_wait(mm, ptep, ptl);
|
|
|
|
}
|
|
|
|
|
2013-11-15 06:31:02 +08:00
|
|
|
void migration_entry_wait_huge(struct vm_area_struct *vma,
|
|
|
|
struct mm_struct *mm, pte_t *pte)
|
2013-06-13 05:05:04 +08:00
|
|
|
{
|
2013-11-15 06:31:02 +08:00
|
|
|
spinlock_t *ptl = huge_pte_lockptr(hstate_vma(vma), mm, pte);
|
2013-06-13 05:05:04 +08:00
|
|
|
__migration_entry_wait(mm, pte, ptl);
|
|
|
|
}
|
|
|
|
|
2017-09-09 07:10:57 +08:00
|
|
|
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
|
|
|
|
void pmd_migration_entry_wait(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl;
|
|
|
|
|
|
|
|
ptl = pmd_lock(mm, pmd);
|
|
|
|
if (!is_pmd_migration_entry(*pmd))
|
|
|
|
goto unlock;
|
2022-01-22 14:10:46 +08:00
|
|
|
migration_entry_wait_on_locked(pmd_to_swp_entry(*pmd), NULL, ptl);
|
2017-09-09 07:10:57 +08:00
|
|
|
return;
|
|
|
|
unlock:
|
|
|
|
spin_unlock(ptl);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2019-03-06 07:48:46 +08:00
|
|
|
static int expected_page_refs(struct address_space *mapping, struct page *page)
|
2018-12-28 16:39:01 +08:00
|
|
|
{
|
|
|
|
int expected_count = 1;
|
|
|
|
|
2019-03-06 07:48:46 +08:00
|
|
|
if (mapping)
|
2021-05-07 19:28:40 +08:00
|
|
|
expected_count += compound_nr(page) + page_has_private(page);
|
2018-12-28 16:39:01 +08:00
|
|
|
return expected_count;
|
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2006-06-23 17:03:32 +08:00
|
|
|
* Replace the page in the mapping.
|
2006-06-23 17:03:29 +08:00
|
|
|
*
|
|
|
|
* The number of remaining references must be:
|
|
|
|
* 1 for anonymous pages without a mapping
|
|
|
|
* 2 for pages with a mapping
|
2009-04-03 23:42:36 +08:00
|
|
|
* 3 for pages with a mapping and PagePrivate/PagePrivate2 set.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
int folio_migrate_mapping(struct address_space *mapping,
|
|
|
|
struct folio *newfolio, struct folio *folio, int extra_count)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2021-05-07 19:28:40 +08:00
|
|
|
XA_STATE(xas, &mapping->i_pages, folio_index(folio));
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
struct zone *oldzone, *newzone;
|
|
|
|
int dirty;
|
2021-05-07 19:28:40 +08:00
|
|
|
int expected_count = expected_page_refs(mapping, &folio->page) + extra_count;
|
|
|
|
long nr = folio_nr_pages(folio);
|
2017-09-09 07:12:09 +08:00
|
|
|
|
2006-06-23 17:03:37 +08:00
|
|
|
if (!mapping) {
|
2007-04-24 05:41:09 +08:00
|
|
|
/* Anonymous page without mapping */
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_ref_count(folio) != expected_count)
|
2006-06-23 17:03:37 +08:00
|
|
|
return -EAGAIN;
|
2015-11-06 10:50:02 +08:00
|
|
|
|
|
|
|
/* No turning back from here */
|
2021-05-07 19:28:40 +08:00
|
|
|
newfolio->index = folio->index;
|
|
|
|
newfolio->mapping = folio->mapping;
|
|
|
|
if (folio_test_swapbacked(folio))
|
|
|
|
__folio_set_swapbacked(newfolio);
|
2015-11-06 10:50:02 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2006-06-23 17:03:37 +08:00
|
|
|
}
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
oldzone = folio_zone(folio);
|
|
|
|
newzone = folio_zone(newfolio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_lock_irq(&xas);
|
2021-05-07 19:28:40 +08:00
|
|
|
if (!folio_ref_freeze(folio, expected_count)) {
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2008-07-26 10:45:30 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2021-05-07 19:28:40 +08:00
|
|
|
* Now we know that no one else is looking at the folio:
|
2015-11-06 10:50:02 +08:00
|
|
|
* no turning back from here.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
newfolio->index = folio->index;
|
|
|
|
newfolio->mapping = folio->mapping;
|
|
|
|
folio_ref_add(newfolio, nr); /* add cache reference */
|
|
|
|
if (folio_test_swapbacked(folio)) {
|
|
|
|
__folio_set_swapbacked(newfolio);
|
|
|
|
if (folio_test_swapcache(folio)) {
|
|
|
|
folio_set_swapcache(newfolio);
|
|
|
|
newfolio->private = folio_get_private(folio);
|
2016-12-25 11:00:29 +08:00
|
|
|
}
|
|
|
|
} else {
|
2021-05-07 19:28:40 +08:00
|
|
|
VM_BUG_ON_FOLIO(folio_test_swapcache(folio), folio);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
/* Move dirty while page refs frozen and newpage not yet exposed */
|
2021-05-07 19:28:40 +08:00
|
|
|
dirty = folio_test_dirty(folio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
if (dirty) {
|
2021-05-07 19:28:40 +08:00
|
|
|
folio_clear_dirty(folio);
|
|
|
|
folio_set_dirty(newfolio);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
xas_store(&xas, newfolio);
|
2006-12-07 12:33:44 +08:00
|
|
|
|
|
|
|
/*
|
2012-01-11 07:07:11 +08:00
|
|
|
* Drop cache reference from old page by unfreezing
|
|
|
|
* to one less reference.
|
2006-12-07 12:33:44 +08:00
|
|
|
* We know this isn't the last reference.
|
|
|
|
*/
|
2021-05-07 19:28:40 +08:00
|
|
|
folio_ref_unfreeze(folio, expected_count - nr);
|
2006-12-07 12:33:44 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock(&xas);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
/* Leave irq disabled to prevent preemption while updating stats */
|
|
|
|
|
2007-04-24 05:41:09 +08:00
|
|
|
/*
|
|
|
|
* If moved to a different zone then also account
|
|
|
|
* the page for that zone. Other VM counters will be
|
|
|
|
* taken care of when we establish references to the
|
|
|
|
* new page and drop references to the old page.
|
|
|
|
*
|
|
|
|
* Note that anonymous pages are accounted for
|
2016-07-29 06:46:17 +08:00
|
|
|
* via NR_FILE_PAGES and NR_ANON_MAPPED if they
|
2007-04-24 05:41:09 +08:00
|
|
|
* are mapped to swap space.
|
|
|
|
*/
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
if (newzone != oldzone) {
|
2020-06-04 07:01:54 +08:00
|
|
|
struct lruvec *old_lruvec, *new_lruvec;
|
|
|
|
struct mem_cgroup *memcg;
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
memcg = folio_memcg(folio);
|
2020-06-04 07:01:54 +08:00
|
|
|
old_lruvec = mem_cgroup_lruvec(memcg, oldzone->zone_pgdat);
|
|
|
|
new_lruvec = mem_cgroup_lruvec(memcg, newzone->zone_pgdat);
|
|
|
|
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_FILE_PAGES, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_FILE_PAGES, nr);
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_test_swapbacked(folio) && !folio_test_swapcache(folio)) {
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_SHMEM, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_SHMEM, nr);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
2021-02-25 04:03:55 +08:00
|
|
|
#ifdef CONFIG_SWAP
|
2021-05-07 19:28:40 +08:00
|
|
|
if (folio_test_swapcache(folio)) {
|
2021-02-25 04:03:55 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_SWAPCACHE, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_SWAPCACHE, nr);
|
|
|
|
}
|
|
|
|
#endif
|
2020-09-24 14:51:40 +08:00
|
|
|
if (dirty && mapping_can_writeback(mapping)) {
|
2021-01-24 13:01:15 +08:00
|
|
|
__mod_lruvec_state(old_lruvec, NR_FILE_DIRTY, -nr);
|
|
|
|
__mod_zone_page_state(oldzone, NR_ZONE_WRITE_PENDING, -nr);
|
|
|
|
__mod_lruvec_state(new_lruvec, NR_FILE_DIRTY, nr);
|
|
|
|
__mod_zone_page_state(newzone, NR_ZONE_WRITE_PENDING, nr);
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
}
|
2009-09-22 08:01:33 +08:00
|
|
|
}
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:50:05 +08:00
|
|
|
local_irq_enable();
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2021-05-07 19:28:40 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_mapping);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
/*
|
|
|
|
* The expected number of remaining references is the same as that
|
2021-05-07 19:28:40 +08:00
|
|
|
* of folio_migrate_mapping().
|
2010-09-08 09:19:35 +08:00
|
|
|
*/
|
|
|
|
int migrate_huge_page_move_mapping(struct address_space *mapping,
|
|
|
|
struct page *newpage, struct page *page)
|
|
|
|
{
|
2017-12-04 17:35:16 +08:00
|
|
|
XA_STATE(xas, &mapping->i_pages, page_index(page));
|
2010-09-08 09:19:35 +08:00
|
|
|
int expected_count;
|
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_lock_irq(&xas);
|
2010-09-08 09:19:35 +08:00
|
|
|
expected_count = 2 + page_has_private(page);
|
2017-12-04 17:35:16 +08:00
|
|
|
if (page_count(page) != expected_count || xas_load(&xas) != page) {
|
|
|
|
xas_unlock_irq(&xas);
|
2010-09-08 09:19:35 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2016-03-18 05:19:26 +08:00
|
|
|
if (!page_ref_freeze(page, expected_count)) {
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2010-09-08 09:19:35 +08:00
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2015-11-06 10:50:02 +08:00
|
|
|
newpage->index = page->index;
|
|
|
|
newpage->mapping = page->mapping;
|
2016-03-16 05:57:19 +08:00
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
get_page(newpage);
|
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_store(&xas, newpage);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2016-03-18 05:19:26 +08:00
|
|
|
page_ref_unfreeze(page, expected_count - 1);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2017-12-04 17:35:16 +08:00
|
|
|
xas_unlock_irq(&xas);
|
2016-03-16 05:57:19 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2010-09-08 09:19:35 +08:00
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2021-05-08 03:26:29 +08:00
|
|
|
* Copy the flags and some other ancillary information
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
void folio_migrate_flags(struct folio *newfolio, struct folio *folio)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2013-10-07 18:29:23 +08:00
|
|
|
int cpupid;
|
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_error(folio))
|
|
|
|
folio_set_error(newfolio);
|
|
|
|
if (folio_test_referenced(folio))
|
|
|
|
folio_set_referenced(newfolio);
|
|
|
|
if (folio_test_uptodate(folio))
|
|
|
|
folio_mark_uptodate(newfolio);
|
|
|
|
if (folio_test_clear_active(folio)) {
|
|
|
|
VM_BUG_ON_FOLIO(folio_test_unevictable(folio), folio);
|
|
|
|
folio_set_active(newfolio);
|
|
|
|
} else if (folio_test_clear_unevictable(folio))
|
|
|
|
folio_set_unevictable(newfolio);
|
|
|
|
if (folio_test_workingset(folio))
|
|
|
|
folio_set_workingset(newfolio);
|
|
|
|
if (folio_test_checked(folio))
|
|
|
|
folio_set_checked(newfolio);
|
|
|
|
if (folio_test_mappedtodisk(folio))
|
|
|
|
folio_set_mappedtodisk(newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
/* Move dirty on pages not done by folio_migrate_mapping() */
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_dirty(folio))
|
|
|
|
folio_set_dirty(newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_young(folio))
|
|
|
|
folio_set_young(newfolio);
|
|
|
|
if (folio_test_idle(folio))
|
|
|
|
folio_set_idle(newfolio);
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 06:35:45 +08:00
|
|
|
|
2013-10-07 18:29:23 +08:00
|
|
|
/*
|
|
|
|
* Copy NUMA information to the new page, to prevent over-eager
|
|
|
|
* future migrations of this same page.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
cpupid = page_cpupid_xchg_last(&folio->page, -1);
|
|
|
|
page_cpupid_xchg_last(&newfolio->page, cpupid);
|
2013-10-07 18:29:23 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
folio_migrate_ksm(newfolio, folio);
|
ksm: make KSM page migration possible
KSM page migration is already supported in the case of memory hotremove,
which takes the ksm_thread_mutex across all its migrations to keep life
simple.
But the new KSM NUMA merge_across_nodes knob introduces a problem, when
it's set to non-default 0: if a KSM page is migrated to a different NUMA
node, how do we migrate its stable node to the right tree? And what if
that collides with an existing stable node?
So far there's no provision for that, and this patch does not attempt to
deal with it either. But how will I test a solution, when I don't know
how to hotremove memory? The best answer is to enable KSM page migration
in all cases now, and test more common cases. With THP and compaction
added since KSM came in, page migration is now mainstream, and it's a
shame that a KSM page can frustrate freeing a page block.
Without worrying about merge_across_nodes 0 for now, this patch gets KSM
page migration working reliably for default merge_across_nodes 1 (but
leave the patch enabling it until near the end of the series).
It's much simpler than I'd originally imagined, and does not require an
additional tier of locking: page migration relies on the page lock, KSM
page reclaim relies on the page lock, the page lock is enough for KSM page
migration too.
Almost all the care has to be in get_ksm_page(): that's the function which
worries about when a stable node is stale and should be freed, now it also
has to worry about the KSM page being migrated.
The only new overhead is an additional put/get/lock/unlock_page when
stable_tree_search() arrives at a matching node: to make sure migration
respects the raised page count, and so does not migrate the page while
we're busy with it here. That's probably avoidable, either by changing
internal interfaces from using kpage to stable_node, or by moving the
ksm_migrate_page() callsite into a page_freeze_refs() section (even if not
swapcache); but this works well, I've no urge to pull it apart now.
(Descents of the stable tree may pass through nodes whose KSM pages are
under migration: being unlocked, the raised page count does not prevent
that, nor need it: it's safe to memcmp against either old or new page.)
You might worry about mremap, and whether page migration's rmap_walk to
remove migration entries will find all the KSM locations where it inserted
earlier: that should already be handled, by the satisfyingly heavy hammer
of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 08:35:10 +08:00
|
|
|
/*
|
|
|
|
* Please do not reorder this without considering how mm/ksm.c's
|
|
|
|
* get_ksm_page() depends upon ksm_migrate_page() and PageSwapCache().
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_swapcache(folio))
|
|
|
|
folio_clear_swapcache(folio);
|
|
|
|
folio_clear_private(folio);
|
2021-07-01 09:47:21 +08:00
|
|
|
|
|
|
|
/* page->private contains hugetlb specific flags */
|
2021-05-08 03:26:29 +08:00
|
|
|
if (!folio_test_hugetlb(folio))
|
|
|
|
folio->private = NULL;
|
2006-03-22 16:09:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If any waiters have accumulated on the new page then
|
|
|
|
* wake them up.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_writeback(newfolio))
|
|
|
|
folio_end_writeback(newfolio);
|
2016-03-16 05:56:15 +08:00
|
|
|
|
2020-04-07 11:04:21 +08:00
|
|
|
/*
|
|
|
|
* PG_readahead shares the same bit with PG_reclaim. The above
|
|
|
|
* end_page_writeback() may clear PG_readahead mistakenly, so set the
|
|
|
|
* bit after that.
|
|
|
|
*/
|
2021-05-08 03:26:29 +08:00
|
|
|
if (folio_test_readahead(folio))
|
|
|
|
folio_set_readahead(newfolio);
|
2020-04-07 11:04:21 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
folio_copy_owner(newfolio, folio);
|
2016-03-16 05:57:54 +08:00
|
|
|
|
2021-05-08 03:26:29 +08:00
|
|
|
if (!folio_test_hugetlb(folio))
|
2021-05-07 06:14:59 +08:00
|
|
|
mem_cgroup_migrate(folio, newfolio);
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2021-05-08 03:26:29 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_flags);
|
2017-09-09 07:12:06 +08:00
|
|
|
|
2021-05-08 03:05:06 +08:00
|
|
|
void folio_migrate_copy(struct folio *newfolio, struct folio *folio)
|
2017-09-09 07:12:06 +08:00
|
|
|
{
|
2021-05-08 03:05:06 +08:00
|
|
|
folio_copy(newfolio, folio);
|
|
|
|
folio_migrate_flags(newfolio, folio);
|
2017-09-09 07:12:06 +08:00
|
|
|
}
|
2021-05-08 03:05:06 +08:00
|
|
|
EXPORT_SYMBOL(folio_migrate_copy);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2006-06-23 17:03:28 +08:00
|
|
|
/************************************************************
|
|
|
|
* Migration functions
|
|
|
|
***********************************************************/
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* Common logic to directly migrate a single LRU page suitable for
|
2009-04-03 23:42:36 +08:00
|
|
|
* pages that do not use PagePrivate/PagePrivate2.
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
|
|
|
* Pages are locked upon entry and exit.
|
|
|
|
*/
|
2006-06-23 17:03:33 +08:00
|
|
|
int migrate_page(struct address_space *mapping,
|
2012-01-13 09:19:43 +08:00
|
|
|
struct page *newpage, struct page *page,
|
|
|
|
enum migrate_mode mode)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2021-05-07 19:28:40 +08:00
|
|
|
struct folio *newfolio = page_folio(newpage);
|
|
|
|
struct folio *folio = page_folio(page);
|
2006-03-22 16:09:12 +08:00
|
|
|
int rc;
|
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
BUG_ON(folio_test_writeback(folio)); /* Writeback must be complete */
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-07 19:28:40 +08:00
|
|
|
rc = folio_migrate_mapping(mapping, newfolio, folio, 0);
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
if (rc != MIGRATEPAGE_SUCCESS)
|
2006-03-22 16:09:12 +08:00
|
|
|
return rc;
|
|
|
|
|
2017-09-09 07:12:06 +08:00
|
|
|
if (mode != MIGRATE_SYNC_NO_COPY)
|
2021-05-08 03:05:06 +08:00
|
|
|
folio_migrate_copy(newfolio, folio);
|
2017-09-09 07:12:06 +08:00
|
|
|
else
|
2021-05-08 03:26:29 +08:00
|
|
|
folio_migrate_flags(newfolio, folio);
|
2012-12-12 08:02:31 +08:00
|
|
|
return MIGRATEPAGE_SUCCESS;
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(migrate_page);
|
|
|
|
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
|
|
|
#ifdef CONFIG_BLOCK
|
2018-12-28 16:39:09 +08:00
|
|
|
/* Returns true if all buffers are successfully locked */
|
|
|
|
static bool buffer_migrate_lock_buffers(struct buffer_head *head,
|
|
|
|
enum migrate_mode mode)
|
|
|
|
{
|
|
|
|
struct buffer_head *bh = head;
|
|
|
|
|
|
|
|
/* Simple case, sync compaction */
|
|
|
|
if (mode != MIGRATE_ASYNC) {
|
|
|
|
do {
|
|
|
|
lock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
|
|
|
|
} while (bh != head);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* async case, we cannot block on lock_buffer so use trylock_buffer */
|
|
|
|
do {
|
|
|
|
if (!trylock_buffer(bh)) {
|
|
|
|
/*
|
|
|
|
* We failed to lock the buffer and cannot stall in
|
|
|
|
* async migration. Release the taken locks
|
|
|
|
*/
|
|
|
|
struct buffer_head *failed_bh = bh;
|
|
|
|
bh = head;
|
|
|
|
while (bh != failed_bh) {
|
|
|
|
unlock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2018-12-28 16:39:12 +08:00
|
|
|
static int __buffer_migrate_page(struct address_space *mapping,
|
|
|
|
struct page *newpage, struct page *page, enum migrate_mode mode,
|
|
|
|
bool check_refs)
|
2006-06-23 17:03:28 +08:00
|
|
|
{
|
|
|
|
struct buffer_head *bh, *head;
|
|
|
|
int rc;
|
2018-12-28 16:39:05 +08:00
|
|
|
int expected_count;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
|
|
|
if (!page_has_buffers(page))
|
2012-01-13 09:19:43 +08:00
|
|
|
return migrate_page(mapping, newpage, page, mode);
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
/* Check whether page does not have extra refs before we do more work */
|
2019-03-06 07:48:46 +08:00
|
|
|
expected_count = expected_page_refs(mapping, page);
|
2018-12-28 16:39:05 +08:00
|
|
|
if (page_count(page) != expected_count)
|
|
|
|
return -EAGAIN;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
head = page_buffers(page);
|
|
|
|
if (!buffer_migrate_lock_buffers(head, mode))
|
|
|
|
return -EAGAIN;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:12 +08:00
|
|
|
if (check_refs) {
|
|
|
|
bool busy;
|
|
|
|
bool invalidated = false;
|
|
|
|
|
|
|
|
recheck_buffers:
|
|
|
|
busy = false;
|
|
|
|
spin_lock(&mapping->private_lock);
|
|
|
|
bh = head;
|
|
|
|
do {
|
|
|
|
if (atomic_read(&bh->b_count)) {
|
|
|
|
busy = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
} while (bh != head);
|
|
|
|
if (busy) {
|
|
|
|
if (invalidated) {
|
|
|
|
rc = -EAGAIN;
|
|
|
|
goto unlock_buffers;
|
|
|
|
}
|
2019-08-03 12:48:47 +08:00
|
|
|
spin_unlock(&mapping->private_lock);
|
2018-12-28 16:39:12 +08:00
|
|
|
invalidate_bh_lrus();
|
|
|
|
invalidated = true;
|
|
|
|
goto recheck_buffers;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-07-19 06:58:46 +08:00
|
|
|
rc = migrate_page_move_mapping(mapping, newpage, page, 0);
|
2012-12-12 08:02:31 +08:00
|
|
|
if (rc != MIGRATEPAGE_SUCCESS)
|
2018-12-28 16:39:05 +08:00
|
|
|
goto unlock_buffers;
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2020-06-02 12:48:06 +08:00
|
|
|
attach_page_private(newpage, detach_page_private(page));
|
2006-06-23 17:03:28 +08:00
|
|
|
|
|
|
|
bh = head;
|
|
|
|
do {
|
|
|
|
set_bh_page(bh, newpage, bh_offset(bh));
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
|
|
|
|
} while (bh != head);
|
|
|
|
|
2017-09-09 07:12:06 +08:00
|
|
|
if (mode != MIGRATE_SYNC_NO_COPY)
|
|
|
|
migrate_page_copy(newpage, page);
|
|
|
|
else
|
|
|
|
migrate_page_states(newpage, page);
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
rc = MIGRATEPAGE_SUCCESS;
|
|
|
|
unlock_buffers:
|
2019-08-03 12:48:47 +08:00
|
|
|
if (check_refs)
|
|
|
|
spin_unlock(&mapping->private_lock);
|
2006-06-23 17:03:28 +08:00
|
|
|
bh = head;
|
|
|
|
do {
|
|
|
|
unlock_buffer(bh);
|
|
|
|
bh = bh->b_this_page;
|
|
|
|
|
|
|
|
} while (bh != head);
|
|
|
|
|
2018-12-28 16:39:05 +08:00
|
|
|
return rc;
|
2006-06-23 17:03:28 +08:00
|
|
|
}
|
2018-12-28 16:39:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Migration function for pages with buffers. This function can only be used
|
|
|
|
* if the underlying filesystem guarantees that no other references to "page"
|
|
|
|
* exist. For example attached buffer heads are accessed only under page lock.
|
|
|
|
*/
|
|
|
|
int buffer_migrate_page(struct address_space *mapping,
|
|
|
|
struct page *newpage, struct page *page, enum migrate_mode mode)
|
|
|
|
{
|
|
|
|
return __buffer_migrate_page(mapping, newpage, page, mode, false);
|
|
|
|
}
|
2006-06-23 17:03:28 +08:00
|
|
|
EXPORT_SYMBOL(buffer_migrate_page);
|
2018-12-28 16:39:12 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Same as above except that this variant is more careful and checks that there
|
|
|
|
* are also no buffer head references. This function is the right one for
|
|
|
|
* mappings where buffer heads are directly looked up and referenced (such as
|
|
|
|
* block device mappings).
|
|
|
|
*/
|
|
|
|
int buffer_migrate_page_norefs(struct address_space *mapping,
|
|
|
|
struct page *newpage, struct page *page, enum migrate_mode mode)
|
|
|
|
{
|
|
|
|
return __buffer_migrate_page(mapping, newpage, page, mode, true);
|
|
|
|
}
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
|
|
|
#endif
|
2006-06-23 17:03:28 +08:00
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
/*
|
|
|
|
* Writeback a page to clean the dirty state
|
|
|
|
*/
|
|
|
|
static int writeout(struct address_space *mapping, struct page *page)
|
2006-06-23 17:03:33 +08:00
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
2006-06-23 17:03:38 +08:00
|
|
|
struct writeback_control wbc = {
|
|
|
|
.sync_mode = WB_SYNC_NONE,
|
|
|
|
.nr_to_write = 1,
|
|
|
|
.range_start = 0,
|
|
|
|
.range_end = LLONG_MAX,
|
|
|
|
.for_reclaim = 1
|
|
|
|
};
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!mapping->a_ops->writepage)
|
|
|
|
/* No write method for the address space */
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!clear_page_dirty_for_io(page))
|
|
|
|
/* Someone else already triggered a write */
|
|
|
|
return -EAGAIN;
|
|
|
|
|
2006-06-23 17:03:33 +08:00
|
|
|
/*
|
2006-06-23 17:03:38 +08:00
|
|
|
* A dirty page may imply that the underlying filesystem has
|
|
|
|
* the page on some queue. So the page must be clean for
|
|
|
|
* migration. Writeout may mean we loose the lock and the
|
|
|
|
* page state is no longer what we checked for earlier.
|
|
|
|
* At this point we know that the migration attempt cannot
|
|
|
|
* be successful.
|
2006-06-23 17:03:33 +08:00
|
|
|
*/
|
2022-01-29 12:32:59 +08:00
|
|
|
remove_migration_ptes(folio, folio, false);
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
rc = mapping->a_ops->writepage(page, &wbc);
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2006-06-23 17:03:38 +08:00
|
|
|
if (rc != AOP_WRITEPAGE_ACTIVATE)
|
|
|
|
/* unlocked. Relock */
|
|
|
|
lock_page(page);
|
|
|
|
|
2008-11-20 07:36:36 +08:00
|
|
|
return (rc < 0) ? -EIO : -EAGAIN;
|
2006-06-23 17:03:38 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Default handling if a filesystem does not provide a migration function.
|
|
|
|
*/
|
|
|
|
static int fallback_migrate_page(struct address_space *mapping,
|
2012-01-13 09:19:43 +08:00
|
|
|
struct page *newpage, struct page *page, enum migrate_mode mode)
|
2006-06-23 17:03:38 +08:00
|
|
|
{
|
2012-01-13 09:19:34 +08:00
|
|
|
if (PageDirty(page)) {
|
2012-01-13 09:19:43 +08:00
|
|
|
/* Only writeback pages in full synchronous migration */
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
2012-01-13 09:19:34 +08:00
|
|
|
return -EBUSY;
|
2017-09-09 07:12:06 +08:00
|
|
|
}
|
2006-06-23 17:03:38 +08:00
|
|
|
return writeout(mapping, page);
|
2012-01-13 09:19:34 +08:00
|
|
|
}
|
2006-06-23 17:03:33 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Buffers may be managed in a filesystem specific way.
|
|
|
|
* We must have no buffers or drop them.
|
|
|
|
*/
|
2009-04-03 23:42:36 +08:00
|
|
|
if (page_has_private(page) &&
|
2006-06-23 17:03:33 +08:00
|
|
|
!try_to_release_page(page, GFP_KERNEL))
|
2019-03-06 07:44:43 +08:00
|
|
|
return mode == MIGRATE_SYNC ? -EAGAIN : -EBUSY;
|
2006-06-23 17:03:33 +08:00
|
|
|
|
2012-01-13 09:19:43 +08:00
|
|
|
return migrate_page(mapping, newpage, page, mode);
|
2006-06-23 17:03:33 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
|
|
|
* Move a page to a newly allocated page
|
|
|
|
* The page is locked and all ptes have been successfully removed.
|
|
|
|
*
|
|
|
|
* The new page will have replaced the old page if this function
|
|
|
|
* is successful.
|
Unevictable LRU Infrastructure
When the system contains lots of mlocked or otherwise unevictable pages,
the pageout code (kswapd) can spend lots of time scanning over these
pages. Worse still, the presence of lots of unevictable pages can confuse
kswapd into thinking that more aggressive pageout modes are required,
resulting in all kinds of bad behaviour.
Infrastructure to manage pages excluded from reclaim--i.e., hidden from
vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to
maintain "unevictable" pages on a separate per-zone LRU list, to "hide"
them from vmscan.
Kosaki Motohiro added the support for the memory controller unevictable
lru list.
Pages on the unevictable list have both PG_unevictable and PG_lru set.
Thus, PG_unevictable is analogous to and mutually exclusive with
PG_active--it specifies which LRU list the page is on.
The unevictable infrastructure is enabled by a new mm Kconfig option
[CONFIG_]UNEVICTABLE_LRU.
A new function 'page_evictable(page, vma)' in vmscan.c tests whether or
not a page may be evictable. Subsequent patches will add the various
!evictable tests. We'll want to keep these tests light-weight for use in
shrink_active_list() and, possibly, the fault path.
To avoid races between tasks putting pages [back] onto an LRU list and
tasks that might be moving the page from non-evictable to evictable state,
the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()'
-- tests the "evictability" of a page after placing it on the LRU, before
dropping the reference. If the page has become unevictable,
putback_lru_page() will redo the 'putback', thus moving the page to the
unevictable list. This way, we avoid "stranding" evictable pages on the
unevictable list.
[akpm@linux-foundation.org: fix fallout from out-of-order merge]
[riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build]
[nishimura@mxp.nes.nec.co.jp: remove redundant mapping check]
[kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework]
[kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c]
[kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure]
[kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch]
[kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:26:39 +08:00
|
|
|
*
|
|
|
|
* Return value:
|
|
|
|
* < 0 - error code
|
2012-12-12 08:02:31 +08:00
|
|
|
* MIGRATEPAGE_SUCCESS - success
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
2010-05-25 05:32:20 +08:00
|
|
|
static int move_to_new_page(struct page *newpage, struct page *page,
|
2015-11-06 10:49:53 +08:00
|
|
|
enum migrate_mode mode)
|
2006-06-23 17:03:51 +08:00
|
|
|
{
|
|
|
|
struct address_space *mapping;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
int rc = -EAGAIN;
|
|
|
|
bool is_lru = !__PageMovable(page);
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
VM_BUG_ON_PAGE(!PageLocked(page), page);
|
|
|
|
VM_BUG_ON_PAGE(!PageLocked(newpage), newpage);
|
2006-06-23 17:03:51 +08:00
|
|
|
|
|
|
|
mapping = page_mapping(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
|
|
|
if (likely(is_lru)) {
|
|
|
|
if (!mapping)
|
|
|
|
rc = migrate_page(mapping, newpage, page, mode);
|
|
|
|
else if (mapping->a_ops->migratepage)
|
|
|
|
/*
|
|
|
|
* Most pages have a mapping and most filesystems
|
|
|
|
* provide a migratepage callback. Anonymous pages
|
|
|
|
* are part of swap space which also has its own
|
|
|
|
* migratepage callback. This is the most common path
|
|
|
|
* for page migration.
|
|
|
|
*/
|
|
|
|
rc = mapping->a_ops->migratepage(mapping, newpage,
|
|
|
|
page, mode);
|
|
|
|
else
|
|
|
|
rc = fallback_migrate_page(mapping, newpage,
|
|
|
|
page, mode);
|
|
|
|
} else {
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* In case of non-lru page, it could be released after
|
|
|
|
* isolation step. In that case, we shouldn't try migration.
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
VM_BUG_ON_PAGE(!PageIsolated(page), page);
|
|
|
|
if (!PageMovable(page)) {
|
|
|
|
rc = MIGRATEPAGE_SUCCESS;
|
2022-03-23 05:46:08 +08:00
|
|
|
ClearPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = mapping->a_ops->migratepage(mapping, newpage,
|
|
|
|
page, mode);
|
|
|
|
WARN_ON_ONCE(rc == MIGRATEPAGE_SUCCESS &&
|
|
|
|
!PageIsolated(page));
|
|
|
|
}
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2015-11-06 10:49:53 +08:00
|
|
|
/*
|
|
|
|
* When successful, old pagecache page->mapping must be cleared before
|
|
|
|
* page is freed; but stats require that PageAnon be left as PageAnon.
|
|
|
|
*/
|
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (__PageMovable(page)) {
|
|
|
|
VM_BUG_ON_PAGE(!PageIsolated(page), page);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We clear PG_movable under page_lock so any compactor
|
|
|
|
* cannot try to migrate this page.
|
|
|
|
*/
|
2022-03-23 05:46:08 +08:00
|
|
|
ClearPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2020-01-31 14:14:41 +08:00
|
|
|
* Anonymous and movable page->mapping will be cleared by
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
* free_pages_prepare so don't reset it here for keeping
|
|
|
|
* the type to work PageAnon, for example.
|
|
|
|
*/
|
|
|
|
if (!PageMappingFlags(page))
|
2015-11-06 10:49:53 +08:00
|
|
|
page->mapping = NULL;
|
2019-03-29 11:44:28 +08:00
|
|
|
|
2022-03-23 05:42:11 +08:00
|
|
|
if (likely(!is_zone_device_page(newpage)))
|
|
|
|
flush_dcache_folio(page_folio(newpage));
|
2010-05-25 05:32:20 +08:00
|
|
|
}
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
out:
|
2006-06-23 17:03:51 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2011-11-01 08:06:57 +08:00
|
|
|
static int __unmap_and_move(struct page *page, struct page *newpage,
|
2013-02-23 08:35:14 +08:00
|
|
|
int force, enum migrate_mode mode)
|
2006-06-23 17:03:51 +08:00
|
|
|
{
|
2022-01-29 03:29:43 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
2022-01-29 12:32:59 +08:00
|
|
|
struct folio *dst = page_folio(newpage);
|
2011-11-01 08:06:57 +08:00
|
|
|
int rc = -EAGAIN;
|
2021-09-09 06:18:06 +08:00
|
|
|
bool page_was_mapped = false;
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:17 +08:00
|
|
|
struct anon_vma *anon_vma = NULL;
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
bool is_lru = !__PageMovable(page);
|
2006-06-23 17:03:53 +08:00
|
|
|
|
2008-08-02 18:01:03 +08:00
|
|
|
if (!trylock_page(page)) {
|
2012-01-13 09:19:43 +08:00
|
|
|
if (!force || mode == MIGRATE_ASYNC)
|
2011-11-01 08:06:57 +08:00
|
|
|
goto out;
|
2011-01-14 07:45:56 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* It's not safe for direct compaction to call lock_page.
|
|
|
|
* For example, during page readahead pages are added locked
|
|
|
|
* to the LRU. Later, when the IO completes the pages are
|
|
|
|
* marked uptodate and unlocked. However, the queueing
|
|
|
|
* could be merging multiple pages for one bio (e.g.
|
fs: convert mpage_readpages to mpage_readahead
Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).
The callers are all trivial except for GFS2 & OCFS2.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 12:47:02 +08:00
|
|
|
* mpage_readahead). If an allocation happens for the
|
2011-01-14 07:45:56 +08:00
|
|
|
* second or third page, the process can end up locking
|
|
|
|
* the same page twice and deadlocking. Rather than
|
|
|
|
* trying to be clever about what pages can be locked,
|
|
|
|
* avoid the use of lock_page for direct compaction
|
|
|
|
* altogether.
|
|
|
|
*/
|
|
|
|
if (current->flags & PF_MEMALLOC)
|
2011-11-01 08:06:57 +08:00
|
|
|
goto out;
|
2011-01-14 07:45:56 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
lock_page(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (PageWriteback(page)) {
|
2011-03-23 07:33:11 +08:00
|
|
|
/*
|
2013-04-30 06:07:58 +08:00
|
|
|
* Only in the case of a full synchronous migration is it
|
2012-01-13 09:19:43 +08:00
|
|
|
* necessary to wait for PageWriteback. In the async case,
|
|
|
|
* the retry loop is too short and in the sync-light case,
|
|
|
|
* the overhead of stalling is too much
|
2011-03-23 07:33:11 +08:00
|
|
|
*/
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
2011-03-23 07:33:11 +08:00
|
|
|
rc = -EBUSY;
|
mm: memcontrol: rewrite uncharge API
The memcg uncharging code that is involved towards the end of a page's
lifetime - truncation, reclaim, swapout, migration - is impressively
complicated and fragile.
Because anonymous and file pages were always charged before they had their
page->mapping established, uncharges had to happen when the page type
could still be known from the context; as in unmap for anonymous, page
cache removal for file and shmem pages, and swap cache truncation for swap
pages. However, these operations happen well before the page is actually
freed, and so a lot of synchronization is necessary:
- Charging, uncharging, page migration, and charge migration all need
to take a per-page bit spinlock as they could race with uncharging.
- Swap cache truncation happens during both swap-in and swap-out, and
possibly repeatedly before the page is actually freed. This means
that the memcg swapout code is called from many contexts that make
no sense and it has to figure out the direction from page state to
make sure memory and memory+swap are always correctly charged.
- On page migration, the old page might be unmapped but then reused,
so memcg code has to prevent untimely uncharging in that case.
Because this code - which should be a simple charge transfer - is so
special-cased, it is not reusable for replace_page_cache().
But now that charged pages always have a page->mapping, introduce
mem_cgroup_uncharge(), which is called after the final put_page(), when we
know for sure that nobody is looking at the page anymore.
For page migration, introduce mem_cgroup_migrate(), which is called after
the migration is successful and the new page is fully rmapped. Because
the old page is no longer uncharged after migration, prevent double
charges by decoupling the page's memcg association (PCG_USED and
pc->mem_cgroup) from the page holding an actual charge. The new bits
PCG_MEM and PCG_MEMSW represent the respective charges and are transferred
to the new page during migration.
mem_cgroup_migrate() is suitable for replace_page_cache() as well,
which gets rid of mem_cgroup_replace_page_cache(). However, care
needs to be taken because both the source and the target page can
already be charged and on the LRU when fuse is splicing: grab the page
lock on the charge moving side to prevent changing pc->mem_cgroup of a
page under migration. Also, the lruvecs of both pages change as we
uncharge the old and charge the new during migration, and putback may
race with us, so grab the lru lock and isolate the pages iff on LRU to
prevent races and ensure the pages are on the right lruvec afterward.
Swap accounting is massively simplified: because the page is no longer
uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can
transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry
before the final put_page() in page reclaim.
Finally, page_cgroup changes are now protected by whatever protection the
page itself offers: anonymous pages are charged under the page table lock,
whereas page cache insertions, swapin, and migration hold the page lock.
Uncharging happens under full exclusion with no outstanding references.
Charging and uncharging also ensure that the page is off-LRU, which
serializes against charge migration. Remove the very costly page_cgroup
lock and set pc->flags non-atomically.
[mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable]
[vdavydov@parallels.com: fix flags definition]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:22 +08:00
|
|
|
goto out_unlock;
|
2011-03-23 07:33:11 +08:00
|
|
|
}
|
|
|
|
if (!force)
|
mm: memcontrol: rewrite uncharge API
The memcg uncharging code that is involved towards the end of a page's
lifetime - truncation, reclaim, swapout, migration - is impressively
complicated and fragile.
Because anonymous and file pages were always charged before they had their
page->mapping established, uncharges had to happen when the page type
could still be known from the context; as in unmap for anonymous, page
cache removal for file and shmem pages, and swap cache truncation for swap
pages. However, these operations happen well before the page is actually
freed, and so a lot of synchronization is necessary:
- Charging, uncharging, page migration, and charge migration all need
to take a per-page bit spinlock as they could race with uncharging.
- Swap cache truncation happens during both swap-in and swap-out, and
possibly repeatedly before the page is actually freed. This means
that the memcg swapout code is called from many contexts that make
no sense and it has to figure out the direction from page state to
make sure memory and memory+swap are always correctly charged.
- On page migration, the old page might be unmapped but then reused,
so memcg code has to prevent untimely uncharging in that case.
Because this code - which should be a simple charge transfer - is so
special-cased, it is not reusable for replace_page_cache().
But now that charged pages always have a page->mapping, introduce
mem_cgroup_uncharge(), which is called after the final put_page(), when we
know for sure that nobody is looking at the page anymore.
For page migration, introduce mem_cgroup_migrate(), which is called after
the migration is successful and the new page is fully rmapped. Because
the old page is no longer uncharged after migration, prevent double
charges by decoupling the page's memcg association (PCG_USED and
pc->mem_cgroup) from the page holding an actual charge. The new bits
PCG_MEM and PCG_MEMSW represent the respective charges and are transferred
to the new page during migration.
mem_cgroup_migrate() is suitable for replace_page_cache() as well,
which gets rid of mem_cgroup_replace_page_cache(). However, care
needs to be taken because both the source and the target page can
already be charged and on the LRU when fuse is splicing: grab the page
lock on the charge moving side to prevent changing pc->mem_cgroup of a
page under migration. Also, the lruvecs of both pages change as we
uncharge the old and charge the new during migration, and putback may
race with us, so grab the lru lock and isolate the pages iff on LRU to
prevent races and ensure the pages are on the right lruvec afterward.
Swap accounting is massively simplified: because the page is no longer
uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can
transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry
before the final put_page() in page reclaim.
Finally, page_cgroup changes are now protected by whatever protection the
page itself offers: anonymous pages are charged under the page table lock,
whereas page cache insertions, swapin, and migration hold the page lock.
Uncharging happens under full exclusion with no outstanding references.
Charging and uncharging also ensure that the page is off-LRU, which
serializes against charge migration. Remove the very costly page_cgroup
lock and set pc->flags non-atomically.
[mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable]
[vdavydov@parallels.com: fix flags definition]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:22 +08:00
|
|
|
goto out_unlock;
|
2006-06-23 17:03:51 +08:00
|
|
|
wait_on_page_writeback(page);
|
|
|
|
}
|
2015-11-06 10:49:56 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
/*
|
2021-09-09 06:18:03 +08:00
|
|
|
* By try_to_migrate(), page->mapcount goes down to 0 here. In this case,
|
2007-07-27 01:41:07 +08:00
|
|
|
* we cannot notice that anon_vma is freed while we migrates a page.
|
2011-01-14 07:47:30 +08:00
|
|
|
* This get_anon_vma() delays freeing anon_vma pointer until the end
|
2007-07-27 01:41:07 +08:00
|
|
|
* of migration. File cache pages are no problem because of page_lock()
|
2007-08-31 14:56:21 +08:00
|
|
|
* File Caches may use write_page() or lock_page() in migration, then,
|
|
|
|
* just care Anon page here.
|
2015-11-06 10:49:56 +08:00
|
|
|
*
|
|
|
|
* Only page_get_anon_vma() understands the subtleties of
|
|
|
|
* getting a hold on an anon_vma from outside one of its mms.
|
|
|
|
* But if we cannot get anon_vma, then we won't need it anyway,
|
|
|
|
* because that implies that the anon page is no longer mapped
|
|
|
|
* (and cannot be remapped so long as we hold the page lock).
|
2007-07-27 01:41:07 +08:00
|
|
|
*/
|
2015-11-06 10:49:56 +08:00
|
|
|
if (PageAnon(page) && !PageKsm(page))
|
2011-05-25 08:12:10 +08:00
|
|
|
anon_vma = page_get_anon_vma(page);
|
2008-02-05 14:29:33 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
/*
|
|
|
|
* Block others from accessing the new page when we get around to
|
|
|
|
* establishing additional references. We are usually the only one
|
|
|
|
* holding a reference to newpage at this point. We used to have a BUG
|
|
|
|
* here if trylock_page(newpage) fails, but would like to allow for
|
|
|
|
* cases where there might be a race with the previous use of newpage.
|
|
|
|
* This is much like races on refcount of oldpage: just don't BUG().
|
|
|
|
*/
|
|
|
|
if (unlikely(!trylock_page(newpage)))
|
|
|
|
goto out_unlock;
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (unlikely(!is_lru)) {
|
|
|
|
rc = move_to_new_page(newpage, page, mode);
|
|
|
|
goto out_unlock_both;
|
|
|
|
}
|
|
|
|
|
2007-07-27 01:41:07 +08:00
|
|
|
/*
|
2008-02-05 14:29:33 +08:00
|
|
|
* Corner case handling:
|
|
|
|
* 1. When a new swap-cache page is read into, it is added to the LRU
|
|
|
|
* and treated as swapcache but it has no rmap yet.
|
|
|
|
* Calling try_to_unmap() against a page->mapping==NULL page will
|
|
|
|
* trigger a BUG. So handle it here.
|
2020-12-15 11:13:02 +08:00
|
|
|
* 2. An orphaned page (see truncate_cleanup_page) might have
|
2008-02-05 14:29:33 +08:00
|
|
|
* fs-private metadata. The page can be picked up due to memory
|
|
|
|
* offlining. Everywhere else except page reclaim, the page is
|
|
|
|
* invisible to the vm, so the page can not be migrated. So try to
|
|
|
|
* free the metadata, so the page can be freed.
|
2006-06-23 17:03:51 +08:00
|
|
|
*/
|
2008-02-05 14:29:33 +08:00
|
|
|
if (!page->mapping) {
|
2014-01-24 07:52:54 +08:00
|
|
|
VM_BUG_ON_PAGE(PageAnon(page), page);
|
2011-01-14 07:47:30 +08:00
|
|
|
if (page_has_private(page)) {
|
2008-02-05 14:29:33 +08:00
|
|
|
try_to_free_buffers(page);
|
2015-11-06 10:49:49 +08:00
|
|
|
goto out_unlock_both;
|
2008-02-05 14:29:33 +08:00
|
|
|
}
|
2015-11-06 10:49:49 +08:00
|
|
|
} else if (page_mapped(page)) {
|
|
|
|
/* Establish migration ptes */
|
2015-11-06 10:49:56 +08:00
|
|
|
VM_BUG_ON_PAGE(PageAnon(page) && !PageKsm(page) && !anon_vma,
|
|
|
|
page);
|
2022-01-29 03:29:43 +08:00
|
|
|
try_to_migrate(folio, 0);
|
2021-09-09 06:18:06 +08:00
|
|
|
page_was_mapped = true;
|
2014-12-13 08:56:19 +08:00
|
|
|
}
|
2007-07-27 01:41:07 +08:00
|
|
|
|
2006-06-25 20:46:49 +08:00
|
|
|
if (!page_mapped(page))
|
2015-11-06 10:49:53 +08:00
|
|
|
rc = move_to_new_page(newpage, page, mode);
|
2006-06-23 17:03:51 +08:00
|
|
|
|
2022-02-15 10:33:17 +08:00
|
|
|
/*
|
|
|
|
* When successful, push newpage to LRU immediately: so that if it
|
|
|
|
* turns out to be an mlocked page, remove_migration_ptes() will
|
|
|
|
* automatically build up the correct newpage->mlock_count for it.
|
|
|
|
*
|
|
|
|
* We would like to do something similar for the old page, when
|
|
|
|
* unsuccessful, and other cases when a page has been temporarily
|
|
|
|
* isolated from the unevictable LRU: but this case is the easiest.
|
|
|
|
*/
|
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
|
|
|
lru_cache_add(newpage);
|
|
|
|
if (page_was_mapped)
|
|
|
|
lru_add_drain();
|
|
|
|
}
|
|
|
|
|
2015-11-06 10:49:53 +08:00
|
|
|
if (page_was_mapped)
|
2022-01-29 12:32:59 +08:00
|
|
|
remove_migration_ptes(folio,
|
|
|
|
rc == MIGRATEPAGE_SUCCESS ? dst : folio, false);
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:17 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
out_unlock_both:
|
|
|
|
unlock_page(newpage);
|
|
|
|
out_unlock:
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:17 +08:00
|
|
|
/* Drop an anon_vma reference if we took one */
|
2010-08-10 08:18:41 +08:00
|
|
|
if (anon_vma)
|
2011-03-23 07:32:46 +08:00
|
|
|
put_anon_vma(anon_vma);
|
2006-06-23 17:03:51 +08:00
|
|
|
unlock_page(page);
|
2011-11-01 08:06:57 +08:00
|
|
|
out:
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
/*
|
2022-02-15 10:33:17 +08:00
|
|
|
* If migration is successful, decrease refcount of the newpage,
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
* which will not free the page because new page owner increased
|
2022-02-15 10:33:17 +08:00
|
|
|
* refcounter.
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
*/
|
2022-02-15 10:33:17 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS)
|
|
|
|
put_page(newpage);
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
|
2011-11-01 08:06:57 +08:00
|
|
|
return rc;
|
|
|
|
}
|
2006-06-23 17:03:53 +08:00
|
|
|
|
2011-11-01 08:06:57 +08:00
|
|
|
/*
|
|
|
|
* Obtain the lock on page, remove all ptes and migrate the page
|
|
|
|
* to the newly allocated page in newpage.
|
|
|
|
*/
|
2020-07-09 01:48:35 +08:00
|
|
|
static int unmap_and_move(new_page_t get_new_page,
|
2015-04-15 06:44:22 +08:00
|
|
|
free_page_t put_new_page,
|
|
|
|
unsigned long private, struct page *page,
|
mm: soft-offline: don't free target page in successful page migration
Stress testing showed that soft offline events for a process iterating
"mmap-pagefault-munmap" loop can trigger
VM_BUG_ON(PAGE_FLAGS_CHECK_AT_PREP) in __free_one_page():
Soft offlining page 0x70fe1 at 0x70100008d000
Soft offlining page 0x705fb at 0x70300008d000
page:ffffea0001c3f840 count:0 mapcount:0 mapping: (null) index:0x2
flags: 0x1fffff80800000(hwpoison)
page dumped because: VM_BUG_ON_PAGE(page->flags & ((1 << 25) - 1))
------------[ cut here ]------------
kernel BUG at /src/linux-dev/mm/page_alloc.c:585!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: cfg80211 rfkill crc32c_intel microcode ppdev parport_pc pcspkr serio_raw virtio_balloon parport i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy
CPU: 3 PID: 1779 Comm: test_base_madv_ Not tainted 4.0.0-v4.0-150511-1451-00009-g82360a3730e6 #139
RIP: free_pcppages_bulk+0x52a/0x6f0
Call Trace:
drain_pages_zone+0x3d/0x50
drain_local_pages+0x1d/0x30
on_each_cpu_mask+0x46/0x80
drain_all_pages+0x14b/0x1e0
soft_offline_page+0x432/0x6e0
SyS_madvise+0x73c/0x780
system_call_fastpath+0x12/0x17
Code: ff 89 45 b4 48 8b 45 c0 48 83 b8 a8 00 00 00 00 0f 85 e3 fb ff ff 0f 1f 00 0f 0b 48 8b 7d 90 48 c7 c6 e8 95 a6 81 e8 e6 32 02 00 <0f> 0b 8b 45 cc 49 89 47 30 41 8b 47 18 83 f8 ff 0f 85 10 ff ff
RIP [<ffffffff811a806a>] free_pcppages_bulk+0x52a/0x6f0
RSP <ffff88007a117d28>
---[ end trace 53926436e76d1f35 ]---
When soft offline successfully migrates page, the source page is supposed
to be freed. But there is a race condition where a source page looks
isolated (i.e. the refcount is 0 and the PageHWPoison is set) but
somewhat linked to pcplist. Then another soft offline event calls
drain_all_pages() and tries to free such hwpoisoned page, which is
forbidden.
This odd page state seems to happen due to the race between put_page() in
putback_lru_page() and __pagevec_lru_add_fn(). But I don't want to play
with tweaking drain code as done in commit 9ab3b598d2df "mm: hwpoison:
drop lru_add_drain_all() in __soft_offline_page()", or to change page
freeing code for this soft offline's purpose.
Instead, let's think about the difference between hard offline and soft
offline. There is an interesting difference in how to isolate the in-use
page between these, that is, hard offline marks PageHWPoison of the target
page at first, and doesn't free it by keeping its refcount 1. OTOH, soft
offline tries to free the target page then marks PageHWPoison. This
difference might be the source of complexity and result in bugs like the
above. So making soft offline isolate with keeping refcount can be a
solution for this problem.
We can pass to page migration code the "reason" which shows the caller, so
let's use this more to avoid calling putback_lru_page() when called from
soft offline, which effectively does the isolation for soft offline. With
this change, target pages of soft offline never be reused without changing
migratetype, so this patch also removes the related code.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:56:50 +08:00
|
|
|
int force, enum migrate_mode mode,
|
2020-12-15 11:13:06 +08:00
|
|
|
enum migrate_reason reason,
|
|
|
|
struct list_head *ret)
|
2011-11-01 08:06:57 +08:00
|
|
|
{
|
2015-11-06 10:49:46 +08:00
|
|
|
int rc = MIGRATEPAGE_SUCCESS;
|
2019-12-01 09:57:12 +08:00
|
|
|
struct page *newpage = NULL;
|
2011-11-01 08:06:57 +08:00
|
|
|
|
2018-04-11 07:30:07 +08:00
|
|
|
if (!thp_migration_supported() && PageTransHuge(page))
|
2020-12-15 11:13:16 +08:00
|
|
|
return -ENOSYS;
|
2018-04-11 07:30:07 +08:00
|
|
|
|
2011-11-01 08:06:57 +08:00
|
|
|
if (page_count(page) == 1) {
|
|
|
|
/* page was freed from under us. So we are done. */
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
ClearPageActive(page);
|
|
|
|
ClearPageUnevictable(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
if (unlikely(__PageMovable(page))) {
|
|
|
|
lock_page(page);
|
|
|
|
if (!PageMovable(page))
|
2022-03-23 05:46:08 +08:00
|
|
|
ClearPageIsolated(page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
unlock_page(page);
|
|
|
|
}
|
2011-11-01 08:06:57 +08:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-12-01 09:57:12 +08:00
|
|
|
newpage = get_new_page(page, private);
|
|
|
|
if (!newpage)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2013-02-23 08:35:14 +08:00
|
|
|
rc = __unmap_and_move(page, newpage, force, mode);
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS)
|
2016-03-16 05:56:18 +08:00
|
|
|
set_page_owner_migrate_reason(newpage, reason);
|
2012-12-12 08:02:42 +08:00
|
|
|
|
2011-11-01 08:06:57 +08:00
|
|
|
out:
|
2006-06-23 17:03:51 +08:00
|
|
|
if (rc != -EAGAIN) {
|
2011-11-01 08:06:57 +08:00
|
|
|
/*
|
|
|
|
* A page that has been migrated has all references
|
|
|
|
* removed and will be freed. A page that has not been
|
2020-01-31 14:14:41 +08:00
|
|
|
* migrated will have kept its references and be restored.
|
2011-11-01 08:06:57 +08:00
|
|
|
*/
|
|
|
|
list_del(&page->lru);
|
2020-12-15 11:13:06 +08:00
|
|
|
}
|
2016-12-13 08:42:26 +08:00
|
|
|
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
|
|
|
* If migration is successful, releases reference grabbed during
|
|
|
|
* isolation. Otherwise, restore the page to right list unless
|
|
|
|
* we want to retry.
|
|
|
|
*/
|
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
2016-12-13 08:42:26 +08:00
|
|
|
/*
|
|
|
|
* Compaction can migrate also non-LRU pages which are
|
|
|
|
* not accounted to NR_ISOLATED_*. They can be recognized
|
|
|
|
* as __PageMovable
|
|
|
|
*/
|
|
|
|
if (likely(!__PageMovable(page)))
|
2017-09-09 07:11:12 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
|
2020-08-15 08:30:37 +08:00
|
|
|
page_is_file_lru(page), -thp_nr_pages(page));
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
|
mm,hwpoison: rework soft offline for in-use pages
This patch changes the way we set and handle in-use poisoned pages. Until
now, poisoned pages were released to the buddy allocator, trusting that
the checks that take place at allocation time would act as a safe net and
would skip that page.
This has proved to be wrong, as we got some pfn walkers out there, like
compaction, that all they care is the page to be in a buddy freelist.
Although this might not be the only user, having poisoned pages in the
buddy allocator seems a bad idea as we should only have free pages that
are ready and meant to be used as such.
Before explaining the taken approach, let us break down the kind of pages
we can soft offline.
- Anonymous THP (after the split, they end up being 4K pages)
- Hugetlb
- Order-0 pages (that can be either migrated or invalited)
* Normal pages (order-0 and anon-THP)
- If they are clean and unmapped page cache pages, we invalidate
then by means of invalidate_inode_page().
- If they are mapped/dirty, we do the isolate-and-migrate dance.
Either way, do not call put_page directly from those paths. Instead, we
keep the page and send it to page_handle_poison to perform the right
handling.
page_handle_poison sets the HWPoison flag and does the last put_page.
Down the chain, we placed a check for HWPoison page in
free_pages_prepare, that just skips any poisoned page, so those pages
do not end up in any pcplist/freelist.
After that, we set the refcount on the page to 1 and we increment
the poisoned pages counter.
If we see that the check in free_pages_prepare creates trouble, we can
always do what we do for free pages:
- wait until the page hits buddy's freelists
- take it off, and flag it
The downside of the above approach is that we could race with an
allocation, so by the time we want to take the page off the buddy, the
page has been already allocated so we cannot soft offline it.
But the user could always retry it.
* Hugetlb pages
- We isolate-and-migrate them
After the migration has been successful, we call dissolve_free_huge_page,
and we set HWPoison on the page if we succeed.
Hugetlb has a slightly different handling though.
While for non-hugetlb pages we cared about closing the race with an
allocation, doing so for hugetlb pages requires quite some additional
and intrusive code (we would need to hook in free_huge_page and some other
places).
So I decided to not make the code overly complicated and just fail
normally if the page we allocated in the meantime.
We can always build on top of this.
As a bonus, because of the way we handle now in-use pages, we no longer
need the put-as-isolation-migratetype dance, that was guarding for poisoned
pages to end up in pcplists.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200922135650.1634-10-osalvador@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:07:09 +08:00
|
|
|
if (reason != MR_MEMORY_FAILURE)
|
2016-04-29 07:18:44 +08:00
|
|
|
/*
|
mm,hwpoison: rework soft offline for in-use pages
This patch changes the way we set and handle in-use poisoned pages. Until
now, poisoned pages were released to the buddy allocator, trusting that
the checks that take place at allocation time would act as a safe net and
would skip that page.
This has proved to be wrong, as we got some pfn walkers out there, like
compaction, that all they care is the page to be in a buddy freelist.
Although this might not be the only user, having poisoned pages in the
buddy allocator seems a bad idea as we should only have free pages that
are ready and meant to be used as such.
Before explaining the taken approach, let us break down the kind of pages
we can soft offline.
- Anonymous THP (after the split, they end up being 4K pages)
- Hugetlb
- Order-0 pages (that can be either migrated or invalited)
* Normal pages (order-0 and anon-THP)
- If they are clean and unmapped page cache pages, we invalidate
then by means of invalidate_inode_page().
- If they are mapped/dirty, we do the isolate-and-migrate dance.
Either way, do not call put_page directly from those paths. Instead, we
keep the page and send it to page_handle_poison to perform the right
handling.
page_handle_poison sets the HWPoison flag and does the last put_page.
Down the chain, we placed a check for HWPoison page in
free_pages_prepare, that just skips any poisoned page, so those pages
do not end up in any pcplist/freelist.
After that, we set the refcount on the page to 1 and we increment
the poisoned pages counter.
If we see that the check in free_pages_prepare creates trouble, we can
always do what we do for free pages:
- wait until the page hits buddy's freelists
- take it off, and flag it
The downside of the above approach is that we could race with an
allocation, so by the time we want to take the page off the buddy, the
page has been already allocated so we cannot soft offline it.
But the user could always retry it.
* Hugetlb pages
- We isolate-and-migrate them
After the migration has been successful, we call dissolve_free_huge_page,
and we set HWPoison on the page if we succeed.
Hugetlb has a slightly different handling though.
While for non-hugetlb pages we cared about closing the race with an
allocation, doing so for hugetlb pages requires quite some additional
and intrusive code (we would need to hook in free_huge_page and some other
places).
So I decided to not make the code overly complicated and just fail
normally if the page we allocated in the meantime.
We can always build on top of this.
As a bonus, because of the way we handle now in-use pages, we no longer
need the put-as-isolation-migratetype dance, that was guarding for poisoned
pages to end up in pcplists.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200922135650.1634-10-osalvador@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:07:09 +08:00
|
|
|
* We release the page in page_handle_poison.
|
2016-04-29 07:18:44 +08:00
|
|
|
*/
|
mm,hwpoison: rework soft offline for in-use pages
This patch changes the way we set and handle in-use poisoned pages. Until
now, poisoned pages were released to the buddy allocator, trusting that
the checks that take place at allocation time would act as a safe net and
would skip that page.
This has proved to be wrong, as we got some pfn walkers out there, like
compaction, that all they care is the page to be in a buddy freelist.
Although this might not be the only user, having poisoned pages in the
buddy allocator seems a bad idea as we should only have free pages that
are ready and meant to be used as such.
Before explaining the taken approach, let us break down the kind of pages
we can soft offline.
- Anonymous THP (after the split, they end up being 4K pages)
- Hugetlb
- Order-0 pages (that can be either migrated or invalited)
* Normal pages (order-0 and anon-THP)
- If they are clean and unmapped page cache pages, we invalidate
then by means of invalidate_inode_page().
- If they are mapped/dirty, we do the isolate-and-migrate dance.
Either way, do not call put_page directly from those paths. Instead, we
keep the page and send it to page_handle_poison to perform the right
handling.
page_handle_poison sets the HWPoison flag and does the last put_page.
Down the chain, we placed a check for HWPoison page in
free_pages_prepare, that just skips any poisoned page, so those pages
do not end up in any pcplist/freelist.
After that, we set the refcount on the page to 1 and we increment
the poisoned pages counter.
If we see that the check in free_pages_prepare creates trouble, we can
always do what we do for free pages:
- wait until the page hits buddy's freelists
- take it off, and flag it
The downside of the above approach is that we could race with an
allocation, so by the time we want to take the page off the buddy, the
page has been already allocated so we cannot soft offline it.
But the user could always retry it.
* Hugetlb pages
- We isolate-and-migrate them
After the migration has been successful, we call dissolve_free_huge_page,
and we set HWPoison on the page if we succeed.
Hugetlb has a slightly different handling though.
While for non-hugetlb pages we cared about closing the race with an
allocation, doing so for hugetlb pages requires quite some additional
and intrusive code (we would need to hook in free_huge_page and some other
places).
So I decided to not make the code overly complicated and just fail
normally if the page we allocated in the meantime.
We can always build on top of this.
As a bonus, because of the way we handle now in-use pages, we no longer
need the put-as-isolation-migratetype dance, that was guarding for poisoned
pages to end up in pcplists.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200922135650.1634-10-osalvador@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:07:09 +08:00
|
|
|
put_page(page);
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
} else {
|
2020-12-15 11:13:06 +08:00
|
|
|
if (rc != -EAGAIN)
|
|
|
|
list_add_tail(&page->lru, ret);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:05 +08:00
|
|
|
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:23:02 +08:00
|
|
|
if (put_new_page)
|
|
|
|
put_new_page(newpage, private);
|
|
|
|
else
|
|
|
|
put_page(newpage);
|
2006-06-23 17:03:51 +08:00
|
|
|
}
|
2014-06-05 07:08:25 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
/*
|
|
|
|
* Counterpart of unmap_and_move_page() for hugepage migration.
|
|
|
|
*
|
|
|
|
* This function doesn't wait the completion of hugepage I/O
|
|
|
|
* because there is no race between I/O and migration for hugepage.
|
|
|
|
* Note that currently hugepage I/O occurs only in direct I/O
|
|
|
|
* where no lock is held and PG_writeback is irrelevant,
|
|
|
|
* and writeback status of all subpages are counted in the reference
|
|
|
|
* count of the head page (i.e. if all subpages of a 2MB hugepage are
|
|
|
|
* under direct I/O, the reference of the head page is 512 and a bit more.)
|
|
|
|
* This means that when we try to migrate hugepage whose subpages are
|
|
|
|
* doing direct I/O, some references remain after try_to_unmap() and
|
|
|
|
* hugepage migration fails without data corruption.
|
|
|
|
*
|
|
|
|
* There is also no race when direct I/O is issued on the page under migration,
|
|
|
|
* because then pte is replaced with migration swap entry and direct I/O code
|
|
|
|
* will wait in the page fault for migration to complete.
|
|
|
|
*/
|
|
|
|
static int unmap_and_move_huge_page(new_page_t get_new_page,
|
2014-06-05 07:08:25 +08:00
|
|
|
free_page_t put_new_page, unsigned long private,
|
|
|
|
struct page *hpage, int force,
|
2020-12-15 11:13:06 +08:00
|
|
|
enum migrate_mode mode, int reason,
|
|
|
|
struct list_head *ret)
|
2010-09-08 09:19:35 +08:00
|
|
|
{
|
2022-01-29 12:32:59 +08:00
|
|
|
struct folio *dst, *src = page_folio(hpage);
|
2015-11-06 10:49:46 +08:00
|
|
|
int rc = -EAGAIN;
|
2014-12-13 08:56:19 +08:00
|
|
|
int page_was_mapped = 0;
|
2014-01-22 07:51:15 +08:00
|
|
|
struct page *new_hpage;
|
2010-09-08 09:19:35 +08:00
|
|
|
struct anon_vma *anon_vma = NULL;
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
struct address_space *mapping = NULL;
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2013-09-12 05:22:11 +08:00
|
|
|
/*
|
2019-03-06 07:43:44 +08:00
|
|
|
* Migratability of hugepages depends on architectures and their size.
|
2013-09-12 05:22:11 +08:00
|
|
|
* This check is necessary because some callers of hugepage migration
|
|
|
|
* like soft offline and memory hotremove don't walk through page
|
|
|
|
* tables or check whether the hugepage is pmd-based or not before
|
|
|
|
* kicking migration.
|
|
|
|
*/
|
2014-06-05 07:10:56 +08:00
|
|
|
if (!hugepage_migration_supported(page_hstate(hpage))) {
|
2020-12-15 11:13:06 +08:00
|
|
|
list_move_tail(&hpage->lru, ret);
|
2013-09-12 05:22:11 +08:00
|
|
|
return -ENOSYS;
|
2014-01-22 07:51:15 +08:00
|
|
|
}
|
2013-09-12 05:22:11 +08:00
|
|
|
|
2021-02-05 10:32:17 +08:00
|
|
|
if (page_count(hpage) == 1) {
|
|
|
|
/* page was freed from under us. So we are done. */
|
|
|
|
putback_active_hugepage(hpage);
|
|
|
|
return MIGRATEPAGE_SUCCESS;
|
|
|
|
}
|
|
|
|
|
2018-04-11 07:30:03 +08:00
|
|
|
new_hpage = get_new_page(hpage, private);
|
2010-09-08 09:19:35 +08:00
|
|
|
if (!new_hpage)
|
|
|
|
return -ENOMEM;
|
2022-01-29 12:32:59 +08:00
|
|
|
dst = page_folio(new_hpage);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
|
|
|
if (!trylock_page(hpage)) {
|
2017-09-09 07:12:06 +08:00
|
|
|
if (!force)
|
2010-09-08 09:19:35 +08:00
|
|
|
goto out;
|
2017-09-09 07:12:06 +08:00
|
|
|
switch (mode) {
|
|
|
|
case MIGRATE_SYNC:
|
|
|
|
case MIGRATE_SYNC_NO_COPY:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto out;
|
|
|
|
}
|
2010-09-08 09:19:35 +08:00
|
|
|
lock_page(hpage);
|
|
|
|
}
|
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
/*
|
|
|
|
* Check for pages which are in the process of being freed. Without
|
|
|
|
* page_mapping() set, hugetlbfs specific move page routine will not
|
|
|
|
* be called and we could leak usage counts for subpools.
|
|
|
|
*/
|
2021-07-01 09:51:29 +08:00
|
|
|
if (hugetlb_page_subpool(hpage) && !page_mapping(hpage)) {
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
rc = -EBUSY;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
2011-05-25 08:12:10 +08:00
|
|
|
if (PageAnon(hpage))
|
|
|
|
anon_vma = page_get_anon_vma(hpage);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2015-11-06 10:49:49 +08:00
|
|
|
if (unlikely(!trylock_page(new_hpage)))
|
|
|
|
goto put_anon;
|
|
|
|
|
2014-12-13 08:56:19 +08:00
|
|
|
if (page_mapped(hpage)) {
|
2021-07-01 09:54:16 +08:00
|
|
|
enum ttu_flags ttu = 0;
|
2020-11-14 14:52:16 +08:00
|
|
|
|
|
|
|
if (!PageAnon(hpage)) {
|
|
|
|
/*
|
|
|
|
* In shared mappings, try_to_unmap could potentially
|
|
|
|
* call huge_pmd_unshare. Because of this, take
|
|
|
|
* semaphore in write mode here and set TTU_RMAP_LOCKED
|
|
|
|
* to let lower levels know we have taken the lock.
|
|
|
|
*/
|
|
|
|
mapping = hugetlb_page_mapping_lock_write(hpage);
|
|
|
|
if (unlikely(!mapping))
|
|
|
|
goto unlock_put_anon;
|
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
ttu = TTU_RMAP_LOCKED;
|
2020-11-14 14:52:16 +08:00
|
|
|
}
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
|
2022-01-29 03:29:43 +08:00
|
|
|
try_to_migrate(src, ttu);
|
2014-12-13 08:56:19 +08:00
|
|
|
page_was_mapped = 1;
|
2020-11-14 14:52:16 +08:00
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
if (ttu & TTU_RMAP_LOCKED)
|
2020-11-14 14:52:16 +08:00
|
|
|
i_mmap_unlock_write(mapping);
|
2014-12-13 08:56:19 +08:00
|
|
|
}
|
2010-09-08 09:19:35 +08:00
|
|
|
|
|
|
|
if (!page_mapped(hpage))
|
2015-11-06 10:49:53 +08:00
|
|
|
rc = move_to_new_page(new_hpage, hpage, mode);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
2020-11-14 14:52:16 +08:00
|
|
|
if (page_was_mapped)
|
2022-01-29 12:32:59 +08:00
|
|
|
remove_migration_ptes(src,
|
|
|
|
rc == MIGRATEPAGE_SUCCESS ? dst : src, false);
|
2010-09-08 09:19:35 +08:00
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 12:11:05 +08:00
|
|
|
unlock_put_anon:
|
2015-11-06 10:49:49 +08:00
|
|
|
unlock_page(new_hpage);
|
|
|
|
|
|
|
|
put_anon:
|
2011-01-14 07:47:31 +08:00
|
|
|
if (anon_vma)
|
2011-03-23 07:32:46 +08:00
|
|
|
put_anon_vma(anon_vma);
|
2012-08-01 07:42:27 +08:00
|
|
|
|
2015-11-06 10:49:46 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS) {
|
2018-02-01 08:20:48 +08:00
|
|
|
move_hugetlb_state(hpage, new_hpage, reason);
|
2015-11-06 10:49:46 +08:00
|
|
|
put_new_page = NULL;
|
|
|
|
}
|
2012-08-01 07:42:27 +08:00
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01 08:22:02 +08:00
|
|
|
out_unlock:
|
2010-09-08 09:19:35 +08:00
|
|
|
unlock_page(hpage);
|
2011-12-09 06:34:20 +08:00
|
|
|
out:
|
2020-12-15 11:13:06 +08:00
|
|
|
if (rc == MIGRATEPAGE_SUCCESS)
|
2013-09-12 05:22:01 +08:00
|
|
|
putback_active_hugepage(hpage);
|
2021-05-05 09:37:07 +08:00
|
|
|
else if (rc != -EAGAIN)
|
2020-12-15 11:13:06 +08:00
|
|
|
list_move_tail(&hpage->lru, ret);
|
2014-06-05 07:08:25 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If migration was not successful and there's a freeing callback, use
|
|
|
|
* it. Otherwise, put_page() will drop the reference grabbed during
|
|
|
|
* isolation.
|
|
|
|
*/
|
2015-11-06 10:49:46 +08:00
|
|
|
if (put_new_page)
|
2014-06-05 07:08:25 +08:00
|
|
|
put_new_page(new_hpage, private);
|
|
|
|
else
|
2015-09-23 05:59:14 +08:00
|
|
|
putback_active_hugepage(new_hpage);
|
2014-06-05 07:08:25 +08:00
|
|
|
|
2010-09-08 09:19:35 +08:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2020-12-15 11:13:16 +08:00
|
|
|
static inline int try_split_thp(struct page *page, struct page **page2,
|
|
|
|
struct list_head *from)
|
|
|
|
{
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
lock_page(page);
|
|
|
|
rc = split_huge_page_to_list(page, from);
|
|
|
|
unlock_page(page);
|
|
|
|
if (!rc)
|
|
|
|
list_safe_reset_next(page, *page2, lru);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2006-03-22 16:09:12 +08:00
|
|
|
/*
|
2013-04-30 06:08:16 +08:00
|
|
|
* migrate_pages - migrate the pages specified in a list, to the free pages
|
|
|
|
* supplied as the target for the page migration
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
2013-04-30 06:08:16 +08:00
|
|
|
* @from: The list of pages to be migrated.
|
|
|
|
* @get_new_page: The function used to allocate free pages to be used
|
|
|
|
* as the target of the page migration.
|
2014-06-05 07:08:25 +08:00
|
|
|
* @put_new_page: The function used to free target pages if migration
|
|
|
|
* fails, or NULL if no special handling is necessary.
|
2013-04-30 06:08:16 +08:00
|
|
|
* @private: Private data to be passed on to get_new_page()
|
|
|
|
* @mode: The migration mode that specifies the constraints for
|
|
|
|
* page migration, if any.
|
|
|
|
* @reason: The reason for page migration.
|
2022-01-15 06:08:34 +08:00
|
|
|
* @ret_succeeded: Set to the number of normal pages migrated successfully if
|
2021-09-03 05:59:13 +08:00
|
|
|
* the caller passes a non-NULL pointer.
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
2013-04-30 06:08:16 +08:00
|
|
|
* The function returns after 10 attempts or if no pages are movable any more
|
|
|
|
* because the list has become empty or no retryable pages exist any more.
|
2020-12-15 11:13:06 +08:00
|
|
|
* It is caller's responsibility to call putback_movable_pages() to return pages
|
|
|
|
* to the LRU or free list only if ret != 0.
|
2006-03-22 16:09:12 +08:00
|
|
|
*
|
2022-01-15 06:08:37 +08:00
|
|
|
* Returns the number of {normal page, THP, hugetlb} that were not migrated, or
|
|
|
|
* an error code. The number of THP splits will be considered as the number of
|
|
|
|
* non-migrated THP, no matter how many subpages of the THP are migrated successfully.
|
2006-03-22 16:09:12 +08:00
|
|
|
*/
|
2013-02-23 08:35:14 +08:00
|
|
|
int migrate_pages(struct list_head *from, new_page_t get_new_page,
|
2014-06-05 07:08:25 +08:00
|
|
|
free_page_t put_new_page, unsigned long private,
|
2021-09-03 05:59:13 +08:00
|
|
|
enum migrate_mode mode, int reason, unsigned int *ret_succeeded)
|
2006-03-22 16:09:12 +08:00
|
|
|
{
|
2006-06-23 17:03:51 +08:00
|
|
|
int retry = 1;
|
2020-08-12 09:31:51 +08:00
|
|
|
int thp_retry = 1;
|
2006-03-22 16:09:12 +08:00
|
|
|
int nr_failed = 0;
|
2022-01-15 06:08:34 +08:00
|
|
|
int nr_failed_pages = 0;
|
2012-10-19 17:46:20 +08:00
|
|
|
int nr_succeeded = 0;
|
2020-08-12 09:31:51 +08:00
|
|
|
int nr_thp_succeeded = 0;
|
|
|
|
int nr_thp_failed = 0;
|
|
|
|
int nr_thp_split = 0;
|
2006-03-22 16:09:12 +08:00
|
|
|
int pass = 0;
|
2020-08-12 09:31:51 +08:00
|
|
|
bool is_thp = false;
|
2006-03-22 16:09:12 +08:00
|
|
|
struct page *page;
|
|
|
|
struct page *page2;
|
2020-08-12 09:31:51 +08:00
|
|
|
int rc, nr_subpages;
|
2020-12-15 11:13:06 +08:00
|
|
|
LIST_HEAD(ret_pages);
|
2022-01-15 06:08:34 +08:00
|
|
|
LIST_HEAD(thp_split_pages);
|
2021-07-01 09:51:48 +08:00
|
|
|
bool nosplit = (reason == MR_NUMA_MISPLACED);
|
2022-01-15 06:08:34 +08:00
|
|
|
bool no_subpage_counting = false;
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2021-05-05 09:37:25 +08:00
|
|
|
trace_mm_migrate_pages_start(mode, reason);
|
|
|
|
|
2022-01-15 06:08:34 +08:00
|
|
|
thp_subpage_migration:
|
2020-08-12 09:31:51 +08:00
|
|
|
for (pass = 0; pass < 10 && (retry || thp_retry); pass++) {
|
2006-06-23 17:03:51 +08:00
|
|
|
retry = 0;
|
2020-08-12 09:31:51 +08:00
|
|
|
thp_retry = 0;
|
2006-03-22 16:09:12 +08:00
|
|
|
|
2006-06-23 17:03:51 +08:00
|
|
|
list_for_each_entry_safe(page, page2, from, lru) {
|
2018-04-11 07:30:07 +08:00
|
|
|
retry:
|
2020-08-12 09:31:51 +08:00
|
|
|
/*
|
|
|
|
* THP statistics is based on the source huge page.
|
|
|
|
* Capture required information that might get lost
|
|
|
|
* during migration.
|
|
|
|
*/
|
2020-09-26 12:19:14 +08:00
|
|
|
is_thp = PageTransHuge(page) && !PageHuge(page);
|
2022-01-15 06:08:37 +08:00
|
|
|
nr_subpages = compound_nr(page);
|
2006-06-23 17:03:51 +08:00
|
|
|
cond_resched();
|
2006-06-23 17:03:33 +08:00
|
|
|
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:21:59 +08:00
|
|
|
if (PageHuge(page))
|
|
|
|
rc = unmap_and_move_huge_page(get_new_page,
|
2014-06-05 07:08:25 +08:00
|
|
|
put_new_page, private, page,
|
2020-12-15 11:13:06 +08:00
|
|
|
pass > 2, mode, reason,
|
|
|
|
&ret_pages);
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:21:59 +08:00
|
|
|
else
|
2014-06-05 07:08:25 +08:00
|
|
|
rc = unmap_and_move(get_new_page, put_new_page,
|
mm: soft-offline: don't free target page in successful page migration
Stress testing showed that soft offline events for a process iterating
"mmap-pagefault-munmap" loop can trigger
VM_BUG_ON(PAGE_FLAGS_CHECK_AT_PREP) in __free_one_page():
Soft offlining page 0x70fe1 at 0x70100008d000
Soft offlining page 0x705fb at 0x70300008d000
page:ffffea0001c3f840 count:0 mapcount:0 mapping: (null) index:0x2
flags: 0x1fffff80800000(hwpoison)
page dumped because: VM_BUG_ON_PAGE(page->flags & ((1 << 25) - 1))
------------[ cut here ]------------
kernel BUG at /src/linux-dev/mm/page_alloc.c:585!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: cfg80211 rfkill crc32c_intel microcode ppdev parport_pc pcspkr serio_raw virtio_balloon parport i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy
CPU: 3 PID: 1779 Comm: test_base_madv_ Not tainted 4.0.0-v4.0-150511-1451-00009-g82360a3730e6 #139
RIP: free_pcppages_bulk+0x52a/0x6f0
Call Trace:
drain_pages_zone+0x3d/0x50
drain_local_pages+0x1d/0x30
on_each_cpu_mask+0x46/0x80
drain_all_pages+0x14b/0x1e0
soft_offline_page+0x432/0x6e0
SyS_madvise+0x73c/0x780
system_call_fastpath+0x12/0x17
Code: ff 89 45 b4 48 8b 45 c0 48 83 b8 a8 00 00 00 00 0f 85 e3 fb ff ff 0f 1f 00 0f 0b 48 8b 7d 90 48 c7 c6 e8 95 a6 81 e8 e6 32 02 00 <0f> 0b 8b 45 cc 49 89 47 30 41 8b 47 18 83 f8 ff 0f 85 10 ff ff
RIP [<ffffffff811a806a>] free_pcppages_bulk+0x52a/0x6f0
RSP <ffff88007a117d28>
---[ end trace 53926436e76d1f35 ]---
When soft offline successfully migrates page, the source page is supposed
to be freed. But there is a race condition where a source page looks
isolated (i.e. the refcount is 0 and the PageHWPoison is set) but
somewhat linked to pcplist. Then another soft offline event calls
drain_all_pages() and tries to free such hwpoisoned page, which is
forbidden.
This odd page state seems to happen due to the race between put_page() in
putback_lru_page() and __pagevec_lru_add_fn(). But I don't want to play
with tweaking drain code as done in commit 9ab3b598d2df "mm: hwpoison:
drop lru_add_drain_all() in __soft_offline_page()", or to change page
freeing code for this soft offline's purpose.
Instead, let's think about the difference between hard offline and soft
offline. There is an interesting difference in how to isolate the in-use
page between these, that is, hard offline marks PageHWPoison of the target
page at first, and doesn't free it by keeping its refcount 1. OTOH, soft
offline tries to free the target page then marks PageHWPoison. This
difference might be the source of complexity and result in bugs like the
above. So making soft offline isolate with keeping refcount can be a
solution for this problem.
We can pass to page migration code the "reason" which shows the caller, so
let's use this more to avoid calling putback_lru_page() when called from
soft offline, which effectively does the isolation for soft offline. With
this change, target pages of soft offline never be reused without changing
migratetype, so this patch also removes the related code.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:56:50 +08:00
|
|
|
private, page, pass > 2, mode,
|
2020-12-15 11:13:06 +08:00
|
|
|
reason, &ret_pages);
|
|
|
|
/*
|
|
|
|
* The rules are:
|
|
|
|
* Success: non hugetlb page will be freed, hugetlb
|
|
|
|
* page will be put back
|
|
|
|
* -EAGAIN: stay on the from list
|
|
|
|
* -ENOMEM: stay on the from list
|
|
|
|
* Other errno: put on ret_pages list then splice to
|
|
|
|
* from list
|
|
|
|
*/
|
2006-06-23 17:03:51 +08:00
|
|
|
switch(rc) {
|
2020-12-15 11:13:16 +08:00
|
|
|
/*
|
|
|
|
* THP migration might be unsupported or the
|
|
|
|
* allocation could've failed so we should
|
|
|
|
* retry on the same page with the THP split
|
|
|
|
* to base pages.
|
|
|
|
*
|
|
|
|
* Head page is retried immediately and tail
|
|
|
|
* pages are added to the tail of the list so
|
|
|
|
* we encounter them after the rest of the list
|
|
|
|
* is processed.
|
|
|
|
*/
|
|
|
|
case -ENOSYS:
|
|
|
|
/* THP migration is unsupported */
|
|
|
|
if (is_thp) {
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_thp_failed++;
|
|
|
|
if (!try_split_thp(page, &page2, &thp_split_pages)) {
|
2020-12-15 11:13:16 +08:00
|
|
|
nr_thp_split++;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2020-12-15 11:13:16 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Hugetlb migration is unsupported */
|
2022-01-15 06:08:34 +08:00
|
|
|
if (!no_subpage_counting)
|
|
|
|
nr_failed++;
|
2022-01-15 06:08:37 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2020-12-15 11:13:16 +08:00
|
|
|
break;
|
2006-06-23 17:03:53 +08:00
|
|
|
case -ENOMEM:
|
2018-04-11 07:30:07 +08:00
|
|
|
/*
|
2020-12-15 11:13:16 +08:00
|
|
|
* When memory is low, don't bother to try to migrate
|
|
|
|
* other pages, just exit.
|
2021-07-01 09:51:48 +08:00
|
|
|
* THP NUMA faulting doesn't split THP to retry.
|
2018-04-11 07:30:07 +08:00
|
|
|
*/
|
2021-07-01 09:51:48 +08:00
|
|
|
if (is_thp && !nosplit) {
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_thp_failed++;
|
|
|
|
if (!try_split_thp(page, &page2, &thp_split_pages)) {
|
2020-08-12 09:31:51 +08:00
|
|
|
nr_thp_split++;
|
2018-04-11 07:30:07 +08:00
|
|
|
goto retry;
|
|
|
|
}
|
2020-09-26 12:19:14 +08:00
|
|
|
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2020-08-12 09:31:51 +08:00
|
|
|
goto out;
|
|
|
|
}
|
2022-01-15 06:08:34 +08:00
|
|
|
|
|
|
|
if (!no_subpage_counting)
|
|
|
|
nr_failed++;
|
2022-01-15 06:08:37 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2006-06-23 17:03:53 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:51 +08:00
|
|
|
case -EAGAIN:
|
2020-08-12 09:31:51 +08:00
|
|
|
if (is_thp) {
|
|
|
|
thp_retry++;
|
|
|
|
break;
|
|
|
|
}
|
2006-06-23 17:03:33 +08:00
|
|
|
retry++;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2012-12-12 08:02:31 +08:00
|
|
|
case MIGRATEPAGE_SUCCESS:
|
2022-01-15 06:08:37 +08:00
|
|
|
nr_succeeded += nr_subpages;
|
2020-08-12 09:31:51 +08:00
|
|
|
if (is_thp) {
|
|
|
|
nr_thp_succeeded++;
|
|
|
|
break;
|
|
|
|
}
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
|
|
|
default:
|
2014-01-22 07:51:14 +08:00
|
|
|
/*
|
2020-12-15 11:13:16 +08:00
|
|
|
* Permanent failure (-EBUSY, etc.):
|
2014-01-22 07:51:14 +08:00
|
|
|
* unlike -EAGAIN case, the failed page is
|
|
|
|
* removed from migration page list and not
|
|
|
|
* retried in the next outer loop.
|
|
|
|
*/
|
2020-08-12 09:31:51 +08:00
|
|
|
if (is_thp) {
|
|
|
|
nr_thp_failed++;
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2020-08-12 09:31:51 +08:00
|
|
|
break;
|
|
|
|
}
|
2022-01-15 06:08:34 +08:00
|
|
|
|
|
|
|
if (!no_subpage_counting)
|
|
|
|
nr_failed++;
|
2022-01-15 06:08:37 +08:00
|
|
|
nr_failed_pages += nr_subpages;
|
2006-06-23 17:03:51 +08:00
|
|
|
break;
|
2006-06-23 17:03:33 +08:00
|
|
|
}
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
|
|
|
}
|
2022-01-15 06:08:34 +08:00
|
|
|
nr_failed += retry;
|
2020-08-12 09:31:51 +08:00
|
|
|
nr_thp_failed += thp_retry;
|
2022-01-15 06:08:34 +08:00
|
|
|
/*
|
|
|
|
* Try to migrate subpages of fail-to-migrate THPs, no nr_failed
|
|
|
|
* counting in this round, since all subpages of a THP is counted
|
|
|
|
* as 1 failure in the first round.
|
|
|
|
*/
|
|
|
|
if (!list_empty(&thp_split_pages)) {
|
|
|
|
/*
|
|
|
|
* Move non-migrated pages (after 10 retries) to ret_pages
|
|
|
|
* to avoid migrating them again.
|
|
|
|
*/
|
|
|
|
list_splice_init(from, &ret_pages);
|
|
|
|
list_splice_init(&thp_split_pages, from);
|
|
|
|
no_subpage_counting = true;
|
|
|
|
retry = 1;
|
|
|
|
goto thp_subpage_migration;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = nr_failed + nr_thp_failed;
|
2006-06-23 17:03:53 +08:00
|
|
|
out:
|
2020-12-15 11:13:06 +08:00
|
|
|
/*
|
|
|
|
* Put the permanent failure page back to migration list, they
|
|
|
|
* will be put back to the right list by the caller.
|
|
|
|
*/
|
|
|
|
list_splice(&ret_pages, from);
|
|
|
|
|
2020-08-12 09:31:51 +08:00
|
|
|
count_vm_events(PGMIGRATE_SUCCESS, nr_succeeded);
|
2022-01-15 06:08:34 +08:00
|
|
|
count_vm_events(PGMIGRATE_FAIL, nr_failed_pages);
|
2020-08-12 09:31:51 +08:00
|
|
|
count_vm_events(THP_MIGRATION_SUCCESS, nr_thp_succeeded);
|
|
|
|
count_vm_events(THP_MIGRATION_FAIL, nr_thp_failed);
|
|
|
|
count_vm_events(THP_MIGRATION_SPLIT, nr_thp_split);
|
2022-01-15 06:08:34 +08:00
|
|
|
trace_mm_migrate_pages(nr_succeeded, nr_failed_pages, nr_thp_succeeded,
|
2020-08-12 09:31:51 +08:00
|
|
|
nr_thp_failed, nr_thp_split, mode, reason);
|
2012-10-19 21:07:31 +08:00
|
|
|
|
2021-09-03 05:59:13 +08:00
|
|
|
if (ret_succeeded)
|
|
|
|
*ret_succeeded = nr_succeeded;
|
|
|
|
|
2012-12-12 08:02:31 +08:00
|
|
|
return rc;
|
2006-03-22 16:09:12 +08:00
|
|
|
}
|
2006-06-23 17:03:53 +08:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
struct page *alloc_migration_target(struct page *page, unsigned long private)
|
2020-08-12 09:37:14 +08:00
|
|
|
{
|
2022-04-05 02:35:04 +08:00
|
|
|
struct folio *folio = page_folio(page);
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
struct migration_target_control *mtc;
|
|
|
|
gfp_t gfp_mask;
|
2020-08-12 09:37:14 +08:00
|
|
|
unsigned int order = 0;
|
2022-04-05 02:35:04 +08:00
|
|
|
struct folio *new_folio = NULL;
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
int nid;
|
|
|
|
int zidx;
|
|
|
|
|
|
|
|
mtc = (struct migration_target_control *)private;
|
|
|
|
gfp_mask = mtc->gfp_mask;
|
|
|
|
nid = mtc->nid;
|
|
|
|
if (nid == NUMA_NO_NODE)
|
2022-04-05 02:35:04 +08:00
|
|
|
nid = folio_nid(folio);
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
if (folio_test_hugetlb(folio)) {
|
|
|
|
struct hstate *h = page_hstate(&folio->page);
|
2020-08-12 09:37:17 +08:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
gfp_mask = htlb_modify_alloc_mask(h, gfp_mask);
|
|
|
|
return alloc_huge_page_nodemask(h, nid, mtc->nmask, gfp_mask);
|
2020-08-12 09:37:17 +08:00
|
|
|
}
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
if (folio_test_large(folio)) {
|
2020-08-12 09:37:20 +08:00
|
|
|
/*
|
|
|
|
* clear __GFP_RECLAIM to make the migration callback
|
|
|
|
* consistent with regular THP allocations.
|
|
|
|
*/
|
|
|
|
gfp_mask &= ~__GFP_RECLAIM;
|
2020-08-12 09:37:14 +08:00
|
|
|
gfp_mask |= GFP_TRANSHUGE;
|
2022-04-05 02:35:04 +08:00
|
|
|
order = folio_order(folio);
|
2020-08-12 09:37:14 +08:00
|
|
|
}
|
2022-04-05 02:35:04 +08:00
|
|
|
zidx = zone_idx(folio_zone(folio));
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 09:37:25 +08:00
|
|
|
if (is_highmem_idx(zidx) || zidx == ZONE_MOVABLE)
|
2020-08-12 09:37:14 +08:00
|
|
|
gfp_mask |= __GFP_HIGHMEM;
|
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
new_folio = __folio_alloc(gfp_mask, order, nid, mtc->nmask);
|
2020-08-12 09:37:14 +08:00
|
|
|
|
2022-04-05 02:35:04 +08:00
|
|
|
return &new_folio->page;
|
2020-08-12 09:37:14 +08:00
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:55 +08:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
static int store_status(int __user *status, int start, int value, int nr)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
while (nr-- > 0) {
|
|
|
|
if (put_user(value, status + start))
|
|
|
|
return -EFAULT;
|
|
|
|
start++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int do_move_pages_to_node(struct mm_struct *mm,
|
|
|
|
struct list_head *pagelist, int node)
|
|
|
|
{
|
|
|
|
int err;
|
2020-08-12 09:37:28 +08:00
|
|
|
struct migration_target_control mtc = {
|
|
|
|
.nid = node,
|
|
|
|
.gfp_mask = GFP_HIGHUSER_MOVABLE | __GFP_THISNODE,
|
|
|
|
};
|
2018-04-11 07:29:59 +08:00
|
|
|
|
2020-08-12 09:37:28 +08:00
|
|
|
err = migrate_pages(pagelist, alloc_migration_target, NULL,
|
2021-09-03 05:59:13 +08:00
|
|
|
(unsigned long)&mtc, MIGRATE_SYNC, MR_SYSCALL, NULL);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
putback_movable_pages(pagelist);
|
|
|
|
return err;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2018-04-11 07:29:59 +08:00
|
|
|
* Resolves the given address to a struct page, isolates it from the LRU and
|
|
|
|
* puts it to the given pagelist.
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
* Returns:
|
|
|
|
* errno - if the page cannot be found/isolated
|
|
|
|
* 0 - when it doesn't have to be migrated because it is already on the
|
|
|
|
* target node
|
|
|
|
* 1 - when it has been queued
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2018-04-11 07:29:59 +08:00
|
|
|
static int add_page_for_migration(struct mm_struct *mm, unsigned long addr,
|
|
|
|
int node, struct list_head *pagelist, bool migrate_all)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct page *page;
|
2006-06-23 17:03:55 +08:00
|
|
|
int err;
|
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_lock(mm);
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EFAULT;
|
2022-04-29 14:16:07 +08:00
|
|
|
vma = vma_lookup(mm, addr);
|
|
|
|
if (!vma || !vma_migratable(vma))
|
2018-04-11 07:29:59 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
/* FOLL_DUMP to ignore special (like zero) pages */
|
2022-03-23 05:45:29 +08:00
|
|
|
page = follow_page(vma, addr, FOLL_GET | FOLL_DUMP);
|
2008-06-21 02:18:25 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = PTR_ERR(page);
|
|
|
|
if (IS_ERR(page))
|
|
|
|
goto out;
|
2008-06-21 02:18:25 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -ENOENT;
|
|
|
|
if (!page)
|
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = 0;
|
|
|
|
if (page_to_nid(page) == node)
|
|
|
|
goto out_putpage;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EACCES;
|
|
|
|
if (page_mapcount(page) > 1 && !migrate_all)
|
|
|
|
goto out_putpage;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
if (PageHuge(page)) {
|
|
|
|
if (PageHead(page)) {
|
|
|
|
isolate_huge_page(page, pagelist);
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
err = 1;
|
2013-09-12 05:22:04 +08:00
|
|
|
}
|
2018-04-11 07:29:59 +08:00
|
|
|
} else {
|
|
|
|
struct page *head;
|
2013-09-12 05:22:04 +08:00
|
|
|
|
2017-09-09 07:11:12 +08:00
|
|
|
head = compound_head(page);
|
|
|
|
err = isolate_lru_page(head);
|
2010-10-27 05:21:29 +08:00
|
|
|
if (err)
|
2018-04-11 07:29:59 +08:00
|
|
|
goto out_putpage;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
err = 1;
|
2018-04-11 07:29:59 +08:00
|
|
|
list_add_tail(&head->lru, pagelist);
|
|
|
|
mod_node_page_state(page_pgdat(head),
|
2020-04-07 11:04:41 +08:00
|
|
|
NR_ISOLATED_ANON + page_is_file_lru(head),
|
2020-08-15 08:30:37 +08:00
|
|
|
thp_nr_pages(head));
|
2018-04-11 07:29:59 +08:00
|
|
|
}
|
|
|
|
out_putpage:
|
|
|
|
/*
|
|
|
|
* Either remove the duplicate refcount from
|
|
|
|
* isolate_lru_page() or drop the page ref if it was
|
|
|
|
* not isolated.
|
|
|
|
*/
|
|
|
|
put_page(page);
|
|
|
|
out:
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_unlock(mm);
|
2006-06-23 17:03:55 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
static int move_pages_and_store_status(struct mm_struct *mm, int node,
|
|
|
|
struct list_head *pagelist, int __user *status,
|
|
|
|
int start, int i, unsigned long nr_pages)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
2020-04-07 11:04:15 +08:00
|
|
|
if (list_empty(pagelist))
|
|
|
|
return 0;
|
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
err = do_move_pages_to_node(mm, pagelist, node);
|
|
|
|
if (err) {
|
|
|
|
/*
|
|
|
|
* Positive err means the number of failed
|
|
|
|
* pages to migrate. Since we are going to
|
|
|
|
* abort and return the number of non-migrated
|
2020-12-15 11:12:52 +08:00
|
|
|
* pages, so need to include the rest of the
|
2020-04-07 11:04:12 +08:00
|
|
|
* nr_pages that have not been attempted as
|
|
|
|
* well.
|
|
|
|
*/
|
|
|
|
if (err > 0)
|
|
|
|
err += nr_pages - i - 1;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
return store_status(status, start, node, i - start);
|
|
|
|
}
|
|
|
|
|
2008-10-19 11:27:17 +08:00
|
|
|
/*
|
|
|
|
* Migrate an array of page address onto an array of nodes and fill
|
|
|
|
* the corresponding array of status.
|
|
|
|
*/
|
2012-03-22 07:34:06 +08:00
|
|
|
static int do_pages_move(struct mm_struct *mm, nodemask_t task_nodes,
|
2008-10-19 11:27:17 +08:00
|
|
|
unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
const int __user *nodes,
|
|
|
|
int __user *status, int flags)
|
|
|
|
{
|
2018-04-11 07:29:59 +08:00
|
|
|
int current_node = NUMA_NO_NODE;
|
|
|
|
LIST_HEAD(pagelist);
|
|
|
|
int start, i;
|
|
|
|
int err = 0, err1;
|
2009-06-17 06:32:43 +08:00
|
|
|
|
2021-05-05 09:36:57 +08:00
|
|
|
lru_cache_disable();
|
2009-06-17 06:32:43 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
for (i = start = 0; i < nr_pages; i++) {
|
|
|
|
const void __user *p;
|
|
|
|
unsigned long addr;
|
|
|
|
int node;
|
2009-01-07 06:38:57 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EFAULT;
|
|
|
|
if (get_user(p, pages + i))
|
|
|
|
goto out_flush;
|
|
|
|
if (get_user(node, nodes + i))
|
|
|
|
goto out_flush;
|
mm: untag user pointers passed to memory syscalls
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
This patch allows tagged pointers to be passed to the following memory
syscalls: get_mempolicy, madvise, mbind, mincore, mlock, mlock2, mprotect,
mremap, msync, munlock, move_pages.
The mmap and mremap syscalls do not currently accept tagged addresses.
Architectures may interpret the tag as a background colour for the
corresponding vma.
Link: http://lkml.kernel.org/r/aaf0c0969d46b2feb9017f3e1b3ef3970b633d91.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26 07:48:30 +08:00
|
|
|
addr = (unsigned long)untagged_addr(p);
|
2018-04-11 07:29:59 +08:00
|
|
|
|
|
|
|
err = -ENODEV;
|
|
|
|
if (node < 0 || node >= MAX_NUMNODES)
|
|
|
|
goto out_flush;
|
|
|
|
if (!node_state(node, N_MEMORY))
|
|
|
|
goto out_flush;
|
2008-10-19 11:27:17 +08:00
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
err = -EACCES;
|
|
|
|
if (!node_isset(node, task_nodes))
|
|
|
|
goto out_flush;
|
|
|
|
|
|
|
|
if (current_node == NUMA_NO_NODE) {
|
|
|
|
current_node = node;
|
|
|
|
start = i;
|
|
|
|
} else if (node != current_node) {
|
2020-04-07 11:04:12 +08:00
|
|
|
err = move_pages_and_store_status(mm, current_node,
|
|
|
|
&pagelist, status, start, i, nr_pages);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
start = i;
|
|
|
|
current_node = node;
|
2009-01-07 06:38:57 +08:00
|
|
|
}
|
|
|
|
|
2018-04-11 07:29:59 +08:00
|
|
|
/*
|
|
|
|
* Errors in the page lookup or isolation are not fatal and we simply
|
|
|
|
* report them via status
|
|
|
|
*/
|
|
|
|
err = add_page_for_migration(mm, addr, current_node,
|
|
|
|
&pagelist, flags & MPOL_MF_MOVE_ALL);
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
|
2020-04-07 11:04:18 +08:00
|
|
|
if (err > 0) {
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-05 04:59:46 +08:00
|
|
|
/* The page is successfully queued for migration */
|
|
|
|
continue;
|
|
|
|
}
|
2009-01-07 06:38:57 +08:00
|
|
|
|
2022-03-23 05:39:40 +08:00
|
|
|
/*
|
|
|
|
* The move_pages() man page does not have an -EEXIST choice, so
|
|
|
|
* use -EFAULT instead.
|
|
|
|
*/
|
|
|
|
if (err == -EEXIST)
|
|
|
|
err = -EFAULT;
|
|
|
|
|
2020-04-07 11:04:18 +08:00
|
|
|
/*
|
|
|
|
* If the page is already on the target node (!err), store the
|
|
|
|
* node, otherwise, store the err.
|
|
|
|
*/
|
|
|
|
err = store_status(status, i, err ? : current_node, 1);
|
2018-04-11 07:29:59 +08:00
|
|
|
if (err)
|
|
|
|
goto out_flush;
|
2008-10-19 11:27:17 +08:00
|
|
|
|
2020-04-07 11:04:12 +08:00
|
|
|
err = move_pages_and_store_status(mm, current_node, &pagelist,
|
|
|
|
status, start, i, nr_pages);
|
2020-04-07 11:04:09 +08:00
|
|
|
if (err)
|
|
|
|
goto out;
|
2018-04-11 07:29:59 +08:00
|
|
|
current_node = NUMA_NO_NODE;
|
2009-01-07 06:38:57 +08:00
|
|
|
}
|
2018-04-11 07:29:59 +08:00
|
|
|
out_flush:
|
|
|
|
/* Make sure we do not overwrite the existing error */
|
2020-04-07 11:04:12 +08:00
|
|
|
err1 = move_pages_and_store_status(mm, current_node, &pagelist,
|
|
|
|
status, start, i, nr_pages);
|
2020-01-31 14:11:14 +08:00
|
|
|
if (err >= 0)
|
2018-04-11 07:29:59 +08:00
|
|
|
err = err1;
|
2008-10-19 11:27:17 +08:00
|
|
|
out:
|
2021-05-05 09:36:57 +08:00
|
|
|
lru_cache_enable();
|
2008-10-19 11:27:17 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2006-06-23 17:03:55 +08:00
|
|
|
/*
|
2008-10-19 11:27:16 +08:00
|
|
|
* Determine the nodes of an array of pages and store it in an array of status.
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2008-12-10 05:14:23 +08:00
|
|
|
static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
|
|
|
|
const void __user **pages, int *status)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
2008-10-19 11:27:16 +08:00
|
|
|
unsigned long i;
|
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_lock(mm);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2008-10-19 11:27:16 +08:00
|
|
|
for (i = 0; i < nr_pages; i++) {
|
2008-12-10 05:14:23 +08:00
|
|
|
unsigned long addr = (unsigned long)(*pages);
|
2006-06-23 17:03:55 +08:00
|
|
|
struct vm_area_struct *vma;
|
|
|
|
struct page *page;
|
2008-12-16 15:06:43 +08:00
|
|
|
int err = -EFAULT;
|
2008-10-19 11:27:16 +08:00
|
|
|
|
2021-06-29 10:39:44 +08:00
|
|
|
vma = vma_lookup(mm, addr);
|
|
|
|
if (!vma)
|
2006-06-23 17:03:55 +08:00
|
|
|
goto set_status;
|
|
|
|
|
2015-09-05 06:47:53 +08:00
|
|
|
/* FOLL_DUMP to ignore special (like zero) pages */
|
|
|
|
page = follow_page(vma, addr, FOLL_DUMP);
|
2008-06-21 02:18:25 +08:00
|
|
|
|
|
|
|
err = PTR_ERR(page);
|
|
|
|
if (IS_ERR(page))
|
|
|
|
goto set_status;
|
|
|
|
|
2015-09-05 06:47:53 +08:00
|
|
|
err = page ? page_to_nid(page) : -ENOENT;
|
2006-06-23 17:03:55 +08:00
|
|
|
set_status:
|
2008-12-10 05:14:23 +08:00
|
|
|
*status = err;
|
|
|
|
|
|
|
|
pages++;
|
|
|
|
status++;
|
|
|
|
}
|
|
|
|
|
2020-06-09 12:33:25 +08:00
|
|
|
mmap_read_unlock(mm);
|
2008-12-10 05:14:23 +08:00
|
|
|
}
|
|
|
|
|
2021-09-09 06:18:17 +08:00
|
|
|
static int get_compat_pages_array(const void __user *chunk_pages[],
|
|
|
|
const void __user * __user *pages,
|
|
|
|
unsigned long chunk_nr)
|
|
|
|
{
|
|
|
|
compat_uptr_t __user *pages32 = (compat_uptr_t __user *)pages;
|
|
|
|
compat_uptr_t p;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < chunk_nr; i++) {
|
|
|
|
if (get_user(p, pages32 + i))
|
|
|
|
return -EFAULT;
|
|
|
|
chunk_pages[i] = compat_ptr(p);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-12-10 05:14:23 +08:00
|
|
|
/*
|
|
|
|
* Determine the nodes of a user array of pages and store it in
|
|
|
|
* a user array of status.
|
|
|
|
*/
|
|
|
|
static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
int __user *status)
|
|
|
|
{
|
2022-04-29 14:16:07 +08:00
|
|
|
#define DO_PAGES_STAT_CHUNK_NR 16UL
|
2008-12-10 05:14:23 +08:00
|
|
|
const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
|
|
|
|
int chunk_status[DO_PAGES_STAT_CHUNK_NR];
|
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
while (nr_pages) {
|
2022-04-29 14:16:07 +08:00
|
|
|
unsigned long chunk_nr = min(nr_pages, DO_PAGES_STAT_CHUNK_NR);
|
2010-02-19 08:13:40 +08:00
|
|
|
|
2021-09-09 06:18:17 +08:00
|
|
|
if (in_compat_syscall()) {
|
|
|
|
if (get_compat_pages_array(chunk_pages, pages,
|
|
|
|
chunk_nr))
|
|
|
|
break;
|
|
|
|
} else {
|
|
|
|
if (copy_from_user(chunk_pages, pages,
|
|
|
|
chunk_nr * sizeof(*chunk_pages)))
|
|
|
|
break;
|
|
|
|
}
|
2008-12-10 05:14:23 +08:00
|
|
|
|
|
|
|
do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
|
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
|
|
|
|
break;
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2010-02-19 08:13:40 +08:00
|
|
|
pages += chunk_nr;
|
|
|
|
status += chunk_nr;
|
|
|
|
nr_pages -= chunk_nr;
|
|
|
|
}
|
|
|
|
return nr_pages ? -EFAULT : 0;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
static struct mm_struct *find_mm_struct(pid_t pid, nodemask_t *mem_nodes)
|
2006-06-23 17:03:55 +08:00
|
|
|
{
|
|
|
|
struct task_struct *task;
|
|
|
|
struct mm_struct *mm;
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
/*
|
|
|
|
* There is no need to check if current process has the right to modify
|
|
|
|
* the specified process when they are same.
|
|
|
|
*/
|
|
|
|
if (!pid) {
|
|
|
|
mmget(current->mm);
|
|
|
|
*mem_nodes = cpuset_mems_allowed(current);
|
|
|
|
return current->mm;
|
|
|
|
}
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
/* Find the mm_struct */
|
2011-02-26 06:44:13 +08:00
|
|
|
rcu_read_lock();
|
2020-10-18 07:14:03 +08:00
|
|
|
task = find_task_by_vpid(pid);
|
2006-06-23 17:03:55 +08:00
|
|
|
if (!task) {
|
2011-02-26 06:44:13 +08:00
|
|
|
rcu_read_unlock();
|
2020-10-18 07:14:03 +08:00
|
|
|
return ERR_PTR(-ESRCH);
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
2012-03-22 07:34:06 +08:00
|
|
|
get_task_struct(task);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if this process has the right to modify the specified
|
2017-08-21 04:26:27 +08:00
|
|
|
* process. Use the regular "ptrace_may_access()" checks.
|
2006-06-23 17:03:55 +08:00
|
|
|
*/
|
2017-08-21 04:26:27 +08:00
|
|
|
if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS)) {
|
2008-11-14 07:39:19 +08:00
|
|
|
rcu_read_unlock();
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(-EPERM);
|
2008-10-19 11:27:17 +08:00
|
|
|
goto out;
|
2006-06-23 17:03:55 +08:00
|
|
|
}
|
2008-11-14 07:39:19 +08:00
|
|
|
rcu_read_unlock();
|
2006-06-23 17:03:55 +08:00
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(security_task_movememory(task));
|
|
|
|
if (IS_ERR(mm))
|
2008-10-19 11:27:17 +08:00
|
|
|
goto out;
|
2020-10-18 07:14:03 +08:00
|
|
|
*mem_nodes = cpuset_mems_allowed(task);
|
2012-03-22 07:34:06 +08:00
|
|
|
mm = get_task_mm(task);
|
2020-10-18 07:14:03 +08:00
|
|
|
out:
|
2012-03-22 07:34:06 +08:00
|
|
|
put_task_struct(task);
|
2012-04-26 07:01:53 +08:00
|
|
|
if (!mm)
|
2020-10-18 07:14:03 +08:00
|
|
|
mm = ERR_PTR(-EINVAL);
|
|
|
|
return mm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Move a list of pages in the address space of the currently executing
|
|
|
|
* process.
|
|
|
|
*/
|
|
|
|
static int kernel_move_pages(pid_t pid, unsigned long nr_pages,
|
|
|
|
const void __user * __user *pages,
|
|
|
|
const int __user *nodes,
|
|
|
|
int __user *status, int flags)
|
|
|
|
{
|
|
|
|
struct mm_struct *mm;
|
|
|
|
int err;
|
|
|
|
nodemask_t task_nodes;
|
|
|
|
|
|
|
|
/* Check flags */
|
|
|
|
if (flags & ~(MPOL_MF_MOVE|MPOL_MF_MOVE_ALL))
|
2012-04-26 07:01:53 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2020-10-18 07:14:03 +08:00
|
|
|
if ((flags & MPOL_MF_MOVE_ALL) && !capable(CAP_SYS_NICE))
|
|
|
|
return -EPERM;
|
|
|
|
|
|
|
|
mm = find_mm_struct(pid, &task_nodes);
|
|
|
|
if (IS_ERR(mm))
|
|
|
|
return PTR_ERR(mm);
|
|
|
|
|
2012-04-26 07:01:53 +08:00
|
|
|
if (nodes)
|
|
|
|
err = do_pages_move(mm, task_nodes, nr_pages, pages,
|
|
|
|
nodes, status, flags);
|
|
|
|
else
|
|
|
|
err = do_pages_stat(mm, nr_pages, pages, status);
|
2006-06-23 17:03:55 +08:00
|
|
|
|
|
|
|
mmput(mm);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2018-03-17 23:08:03 +08:00
|
|
|
SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
|
|
|
|
const void __user * __user *, pages,
|
|
|
|
const int __user *, nodes,
|
|
|
|
int __user *, status, int, flags)
|
|
|
|
{
|
|
|
|
return kernel_move_pages(pid, nr_pages, pages, nodes, status, flags);
|
|
|
|
}
|
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
|
|
|
/*
|
|
|
|
* Returns true if this is a safe migration target node for misplaced NUMA
|
2022-04-29 14:16:03 +08:00
|
|
|
* pages. Currently it only checks the watermarks which is crude.
|
2012-10-25 20:16:34 +08:00
|
|
|
*/
|
|
|
|
static bool migrate_balanced_pgdat(struct pglist_data *pgdat,
|
2013-02-23 08:34:27 +08:00
|
|
|
unsigned long nr_migrate_pages)
|
2012-10-25 20:16:34 +08:00
|
|
|
{
|
|
|
|
int z;
|
2016-07-29 06:45:31 +08:00
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
|
|
|
|
struct zone *zone = pgdat->node_zones + z;
|
|
|
|
|
2022-04-29 14:16:03 +08:00
|
|
|
if (!managed_zone(zone))
|
2012-10-25 20:16:34 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Avoid waking kswapd by allocating pages_to_migrate pages. */
|
|
|
|
if (!zone_watermark_ok(zone, 0,
|
|
|
|
high_wmark_pages(zone) +
|
|
|
|
nr_migrate_pages,
|
autonuma: fix watermark checking in migrate_balanced_pgdat()
When zone_watermark_ok() is called in migrate_balanced_pgdat() to check
migration target node, the parameter classzone_idx (for requested zone)
is specified as 0 (ZONE_DMA). But when allocating memory for autonuma
in alloc_misplaced_dst_page(), the requested zone from GFP flags is
ZONE_MOVABLE. That is, the requested zone is different. The size of
lowmem_reserve for the different requested zone is different. And this
may cause some issues.
For example, in the zoneinfo of a test machine as below,
Node 0, zone DMA32
pages free 61592
min 29
low 454
high 879
spanned 1044480
present 442306
managed 425921
protection: (0, 0, 62457, 62457, 62457)
The free page number of ZONE_DMA32 is greater than "high watermark +
lowmem_reserve[ZONE_DMA]", but less than "high watermark +
lowmem_reserve[ZONE_MOVABLE]". And because __alloc_pages_node() in
alloc_misplaced_dst_page() requests ZONE_MOVABLE, the
zone_watermark_ok() on ZONE_DMA32 in migrate_balanced_pgdat() may always
return true. So, autonuma may not stop even when memory pressure in
node 0 is heavy.
To fix the issue, ZONE_MOVABLE is used as parameter to call
zone_watermark_ok() in migrate_balanced_pgdat(). This makes it same as
requested zone in alloc_misplaced_dst_page(). So that
migrate_balanced_pgdat() returns false when memory pressure is heavy.
Link: http://lkml.kernel.org/r/20191101075727.26683-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 09:57:28 +08:00
|
|
|
ZONE_MOVABLE, 0))
|
2012-10-25 20:16:34 +08:00
|
|
|
continue;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct page *alloc_misplaced_dst_page(struct page *page,
|
2018-04-11 07:30:03 +08:00
|
|
|
unsigned long data)
|
2012-10-25 20:16:34 +08:00
|
|
|
{
|
|
|
|
int nid = (int) data;
|
2021-07-06 22:50:39 +08:00
|
|
|
int order = compound_order(page);
|
|
|
|
gfp_t gfp = __GFP_THISNODE;
|
|
|
|
struct folio *new;
|
|
|
|
|
|
|
|
if (order > 0)
|
|
|
|
gfp |= GFP_TRANSHUGE_LIGHT;
|
|
|
|
else {
|
|
|
|
gfp |= GFP_HIGHUSER_MOVABLE | __GFP_NOMEMALLOC | __GFP_NORETRY |
|
|
|
|
__GFP_NOWARN;
|
|
|
|
gfp &= ~__GFP_RECLAIM;
|
|
|
|
}
|
|
|
|
new = __folio_alloc_node(gfp, order, nid);
|
2021-07-01 09:51:42 +08:00
|
|
|
|
2021-07-06 22:50:39 +08:00
|
|
|
return &new->page;
|
2021-07-01 09:51:42 +08:00
|
|
|
}
|
|
|
|
|
2014-01-22 07:50:58 +08:00
|
|
|
static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
|
2012-11-19 20:35:47 +08:00
|
|
|
{
|
2021-09-09 06:18:01 +08:00
|
|
|
int nr_pages = thp_nr_pages(page);
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
int order = compound_order(page);
|
2012-11-15 05:41:46 +08:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
VM_BUG_ON_PAGE(order && !PageTransHuge(page), page);
|
2013-02-23 08:34:27 +08:00
|
|
|
|
2021-07-01 09:51:51 +08:00
|
|
|
/* Do not migrate THP mapped by multiple processes */
|
|
|
|
if (PageTransHuge(page) && total_mapcount(page) > 1)
|
|
|
|
return 0;
|
|
|
|
|
2012-10-25 20:16:34 +08:00
|
|
|
/* Avoid migrating to a node that is nearly full */
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
if (!migrate_balanced_pgdat(pgdat, nr_pages)) {
|
|
|
|
int z;
|
|
|
|
|
|
|
|
if (!(sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING))
|
|
|
|
return 0;
|
|
|
|
for (z = pgdat->nr_zones - 1; z >= 0; z--) {
|
2022-04-29 14:16:03 +08:00
|
|
|
if (managed_zone(pgdat->node_zones + z))
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
wakeup_kswapd(pgdat->node_zones + z, 0, order, ZONE_MOVABLE);
|
2013-02-23 08:34:33 +08:00
|
|
|
return 0;
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:23 +08:00
|
|
|
}
|
2012-10-25 20:16:34 +08:00
|
|
|
|
2013-02-23 08:34:33 +08:00
|
|
|
if (isolate_lru_page(page))
|
|
|
|
return 0;
|
2012-10-25 20:16:34 +08:00
|
|
|
|
2022-04-29 14:16:07 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON + page_is_file_lru(page),
|
2021-09-09 06:18:01 +08:00
|
|
|
nr_pages);
|
2013-02-23 08:34:33 +08:00
|
|
|
|
2012-11-27 22:03:05 +08:00
|
|
|
/*
|
2013-02-23 08:34:33 +08:00
|
|
|
* Isolating the page has taken another reference, so the
|
|
|
|
* caller's reference can be safely dropped without the page
|
|
|
|
* disappearing underneath us during migration.
|
2012-11-27 22:03:05 +08:00
|
|
|
*/
|
|
|
|
put_page(page);
|
2013-02-23 08:34:33 +08:00
|
|
|
return 1;
|
2012-11-19 20:35:47 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to migrate a misplaced page to the specified destination
|
|
|
|
* node. Caller is expected to have an elevated reference count on
|
|
|
|
* the page that will be dropped by this function before returning.
|
|
|
|
*/
|
2013-10-07 18:29:05 +08:00
|
|
|
int migrate_misplaced_page(struct page *page, struct vm_area_struct *vma,
|
|
|
|
int node)
|
2012-11-19 20:35:47 +08:00
|
|
|
{
|
|
|
|
pg_data_t *pgdat = NODE_DATA(node);
|
2013-02-23 08:34:33 +08:00
|
|
|
int isolated;
|
2012-11-19 20:35:47 +08:00
|
|
|
int nr_remaining;
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:20 +08:00
|
|
|
unsigned int nr_succeeded;
|
2012-11-19 20:35:47 +08:00
|
|
|
LIST_HEAD(migratepages);
|
2021-07-30 05:53:47 +08:00
|
|
|
int nr_pages = thp_nr_pages(page);
|
2021-07-01 09:51:42 +08:00
|
|
|
|
2012-11-19 20:35:47 +08:00
|
|
|
/*
|
2013-10-07 18:29:05 +08:00
|
|
|
* Don't migrate file pages that are mapped in multiple processes
|
|
|
|
* with execute permissions as they are probably shared libraries.
|
2012-11-19 20:35:47 +08:00
|
|
|
*/
|
2021-05-05 09:37:16 +08:00
|
|
|
if (page_mapcount(page) != 1 && page_is_file_lru(page) &&
|
|
|
|
(vma->vm_flags & VM_EXEC))
|
2012-11-19 20:35:47 +08:00
|
|
|
goto out;
|
|
|
|
|
2018-04-11 07:29:20 +08:00
|
|
|
/*
|
|
|
|
* Also do not migrate dirty pages as not all filesystems can move
|
|
|
|
* dirty pages in MIGRATE_ASYNC mode which is a waste of cycles.
|
|
|
|
*/
|
2020-04-07 11:04:41 +08:00
|
|
|
if (page_is_file_lru(page) && PageDirty(page))
|
2018-04-11 07:29:20 +08:00
|
|
|
goto out;
|
|
|
|
|
2012-11-19 20:35:47 +08:00
|
|
|
isolated = numamigrate_isolate_page(pgdat, page);
|
|
|
|
if (!isolated)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
list_add(&page->lru, &migratepages);
|
2021-07-06 22:50:39 +08:00
|
|
|
nr_remaining = migrate_pages(&migratepages, alloc_misplaced_dst_page,
|
|
|
|
NULL, node, MIGRATE_ASYNC,
|
|
|
|
MR_NUMA_MISPLACED, &nr_succeeded);
|
2012-11-19 20:35:47 +08:00
|
|
|
if (nr_remaining) {
|
2014-01-22 07:51:17 +08:00
|
|
|
if (!list_empty(&migratepages)) {
|
|
|
|
list_del(&page->lru);
|
2021-07-01 09:51:45 +08:00
|
|
|
mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON +
|
|
|
|
page_is_file_lru(page), -nr_pages);
|
2014-01-22 07:51:17 +08:00
|
|
|
putback_lru_page(page);
|
|
|
|
}
|
2012-11-19 20:35:47 +08:00
|
|
|
isolated = 0;
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:20 +08:00
|
|
|
}
|
|
|
|
if (nr_succeeded) {
|
|
|
|
count_vm_numa_events(NUMA_PAGE_MIGRATE, nr_succeeded);
|
|
|
|
if (!node_is_toptier(page_to_nid(page)) && node_is_toptier(node))
|
|
|
|
mod_node_page_state(pgdat, PGPROMOTE_SUCCESS,
|
|
|
|
nr_succeeded);
|
|
|
|
}
|
2012-10-25 20:16:34 +08:00
|
|
|
BUG_ON(!list_empty(&migratepages));
|
|
|
|
return isolated;
|
2013-02-23 08:34:33 +08:00
|
|
|
|
|
|
|
out:
|
|
|
|
put_page(page);
|
|
|
|
return 0;
|
2012-10-25 20:16:34 +08:00
|
|
|
}
|
2012-12-05 17:32:56 +08:00
|
|
|
#endif /* CONFIG_NUMA_BALANCING */
|
2012-10-25 20:16:34 +08:00
|
|
|
#endif /* CONFIG_NUMA */
|
2017-09-09 07:12:09 +08:00
|
|
|
|
2022-01-15 06:08:49 +08:00
|
|
|
/*
|
|
|
|
* node_demotion[] example:
|
|
|
|
*
|
|
|
|
* Consider a system with two sockets. Each socket has
|
|
|
|
* three classes of memory attached: fast, medium and slow.
|
|
|
|
* Each memory class is placed in its own NUMA node. The
|
|
|
|
* CPUs are placed in the node with the "fast" memory. The
|
|
|
|
* 6 NUMA nodes (0-5) might be split among the sockets like
|
|
|
|
* this:
|
|
|
|
*
|
|
|
|
* Socket A: 0, 1, 2
|
|
|
|
* Socket B: 3, 4, 5
|
|
|
|
*
|
|
|
|
* When Node 0 fills up, its memory should be migrated to
|
|
|
|
* Node 1. When Node 1 fills up, it should be migrated to
|
|
|
|
* Node 2. The migration path start on the nodes with the
|
|
|
|
* processors (since allocations default to this node) and
|
|
|
|
* fast memory, progress through medium and end with the
|
|
|
|
* slow memory:
|
|
|
|
*
|
|
|
|
* 0 -> 1 -> 2 -> stop
|
|
|
|
* 3 -> 4 -> 5 -> stop
|
|
|
|
*
|
|
|
|
* This is represented in the node_demotion[] like this:
|
|
|
|
*
|
|
|
|
* { nr=1, nodes[0]=1 }, // Node 0 migrates to 1
|
|
|
|
* { nr=1, nodes[0]=2 }, // Node 1 migrates to 2
|
|
|
|
* { nr=0, nodes[0]=-1 }, // Node 2 does not migrate
|
|
|
|
* { nr=1, nodes[0]=4 }, // Node 3 migrates to 4
|
|
|
|
* { nr=1, nodes[0]=5 }, // Node 4 migrates to 5
|
|
|
|
* { nr=0, nodes[0]=-1 }, // Node 5 does not migrate
|
|
|
|
*
|
|
|
|
* Moreover some systems may have multiple slow memory nodes.
|
|
|
|
* Suppose a system has one socket with 3 memory nodes, node 0
|
|
|
|
* is fast memory type, and node 1/2 both are slow memory
|
|
|
|
* type, and the distance between fast memory node and slow
|
|
|
|
* memory node is same. So the migration path should be:
|
|
|
|
*
|
|
|
|
* 0 -> 1/2 -> stop
|
|
|
|
*
|
|
|
|
* This is represented in the node_demotion[] like this:
|
|
|
|
* { nr=2, {nodes[0]=1, nodes[1]=2} }, // Node 0 migrates to node 1 and node 2
|
|
|
|
* { nr=0, nodes[0]=-1, }, // Node 1 dose not migrate
|
|
|
|
* { nr=0, nodes[0]=-1, }, // Node 2 does not migrate
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Writes to this array occur without locking. Cycles are
|
|
|
|
* not allowed: Node X demotes to Y which demotes to X...
|
|
|
|
*
|
|
|
|
* If multiple reads are performed, a single rcu_read_lock()
|
|
|
|
* must be held over all reads to ensure that no cycles are
|
|
|
|
* observed.
|
|
|
|
*/
|
|
|
|
#define DEFAULT_DEMOTION_TARGET_NODES 15
|
|
|
|
|
|
|
|
#if MAX_NUMNODES < DEFAULT_DEMOTION_TARGET_NODES
|
|
|
|
#define DEMOTION_TARGET_NODES (MAX_NUMNODES - 1)
|
|
|
|
#else
|
|
|
|
#define DEMOTION_TARGET_NODES DEFAULT_DEMOTION_TARGET_NODES
|
|
|
|
#endif
|
|
|
|
|
|
|
|
struct demotion_nodes {
|
|
|
|
unsigned short nr;
|
|
|
|
short nodes[DEMOTION_TARGET_NODES];
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct demotion_nodes *node_demotion __read_mostly;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* next_demotion_node() - Get the next node in the demotion path
|
|
|
|
* @node: The starting node to lookup the next node
|
|
|
|
*
|
|
|
|
* Return: node id for next memory node in the demotion path hierarchy
|
|
|
|
* from @node; NUMA_NO_NODE if @node is terminal. This does not keep
|
|
|
|
* @node online or guarantee that it *continues* to be the next demotion
|
|
|
|
* target.
|
|
|
|
*/
|
|
|
|
int next_demotion_node(int node)
|
|
|
|
{
|
|
|
|
struct demotion_nodes *nd;
|
|
|
|
unsigned short target_nr, index;
|
|
|
|
int target;
|
|
|
|
|
|
|
|
if (!node_demotion)
|
|
|
|
return NUMA_NO_NODE;
|
|
|
|
|
|
|
|
nd = &node_demotion[node];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* node_demotion[] is updated without excluding this
|
|
|
|
* function from running. RCU doesn't provide any
|
|
|
|
* compiler barriers, so the READ_ONCE() is required
|
|
|
|
* to avoid compiler reordering or read merging.
|
|
|
|
*
|
|
|
|
* Make sure to use RCU over entire code blocks if
|
|
|
|
* node_demotion[] reads need to be consistent.
|
|
|
|
*/
|
|
|
|
rcu_read_lock();
|
|
|
|
target_nr = READ_ONCE(nd->nr);
|
|
|
|
|
|
|
|
switch (target_nr) {
|
|
|
|
case 0:
|
|
|
|
target = NUMA_NO_NODE;
|
|
|
|
goto out;
|
|
|
|
case 1:
|
|
|
|
index = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
/*
|
|
|
|
* If there are multiple target nodes, just select one
|
|
|
|
* target node randomly.
|
|
|
|
*
|
|
|
|
* In addition, we can also use round-robin to select
|
|
|
|
* target node, but we should introduce another variable
|
|
|
|
* for node_demotion[] to record last selected target node,
|
|
|
|
* that may cause cache ping-pong due to the changing of
|
|
|
|
* last target node. Or introducing per-cpu data to avoid
|
|
|
|
* caching issue, which seems more complicated. So selecting
|
|
|
|
* target node randomly seems better until now.
|
|
|
|
*/
|
|
|
|
index = get_random_int() % target_nr;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
target = READ_ONCE(nd->nodes[index]);
|
|
|
|
|
|
|
|
out:
|
|
|
|
rcu_read_unlock();
|
|
|
|
return target;
|
|
|
|
}
|
|
|
|
|
2021-10-19 06:15:32 +08:00
|
|
|
#if defined(CONFIG_HOTPLUG_CPU)
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
/* Disable reclaim-based migration. */
|
|
|
|
static void __disable_all_migrate_targets(void)
|
|
|
|
{
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
int node, i;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
if (!node_demotion)
|
|
|
|
return;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
for_each_online_node(node) {
|
|
|
|
node_demotion[node].nr = 0;
|
|
|
|
for (i = 0; i < DEMOTION_TARGET_NODES; i++)
|
|
|
|
node_demotion[node].nodes[i] = NUMA_NO_NODE;
|
|
|
|
}
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void disable_all_migrate_targets(void)
|
|
|
|
{
|
|
|
|
__disable_all_migrate_targets();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ensure that the "disable" is visible across the system.
|
|
|
|
* Readers will see either a combination of before+disable
|
|
|
|
* state or disable+after. They will never see before and
|
|
|
|
* after state together.
|
|
|
|
*
|
|
|
|
* The before+after state together might have cycles and
|
|
|
|
* could cause readers to do things like loop until this
|
|
|
|
* function finishes. This ensures they can only see a
|
|
|
|
* single "bad" read and would, for instance, only loop
|
|
|
|
* once.
|
|
|
|
*/
|
|
|
|
synchronize_rcu();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find an automatic demotion target for 'node'.
|
|
|
|
* Failing here is OK. It might just indicate
|
|
|
|
* being at the end of a chain.
|
|
|
|
*/
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
static int establish_migrate_target(int node, nodemask_t *used,
|
|
|
|
int best_distance)
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
{
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
int migration_target, index, val;
|
|
|
|
struct demotion_nodes *nd;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
if (!node_demotion)
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
return NUMA_NO_NODE;
|
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
nd = &node_demotion[node];
|
|
|
|
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
migration_target = find_next_best_node(node, used);
|
|
|
|
if (migration_target == NUMA_NO_NODE)
|
|
|
|
return NUMA_NO_NODE;
|
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
/*
|
|
|
|
* If the node has been set a migration target node before,
|
|
|
|
* which means it's the best distance between them. Still
|
|
|
|
* check if this node can be demoted to other target nodes
|
|
|
|
* if they have a same best distance.
|
|
|
|
*/
|
|
|
|
if (best_distance != -1) {
|
|
|
|
val = node_distance(node, migration_target);
|
|
|
|
if (val > best_distance)
|
mm,migrate: fix establishing demotion target
In commit ac16ec835314 ("mm: migrate: support multiple target nodes
demotion"), after the first demotion target node is found, we will
continue to check the next candidate obtained via find_next_best_node().
This is to find all demotion target nodes with same NUMA distance. But
one side effect of find_next_best_node() is that the candidate node
returned will be set in "used" parameter, even if the candidate node isn't
passed in the following NUMA distance checking, the candidate node will
not be used as demotion target node for the following nodes. For example,
for system as follows,
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
when we establish demotion target node for node 0, in the first round node
2 is added to the demotion target node set. Then in the second round,
node 3 is checked and failed because distance(0, 3) > distance(0, 2). But
node 3 is set in "used" nodemask too. When we establish demotion target
node for node 1, there is no available node. This is wrong, node 3 should
be set as the demotion target of node 1.
To fix this, if the candidate node is failed to pass the distance
checking, it will be cleared in "used" nodemask. So that it can be used
for the following node.
The bug can be reproduced and fixed with this patch on a 2 socket server
machine with DRAM and PMEM.
Link: https://lkml.kernel.org/r/20220128055940.1792614-1-ying.huang@intel.com
Fixes: ac16ec835314 ("mm: migrate: support multiple target nodes demotion")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:05 +08:00
|
|
|
goto out_clear;
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
index = nd->nr;
|
|
|
|
if (WARN_ONCE(index >= DEMOTION_TARGET_NODES,
|
|
|
|
"Exceeds maximum demotion target nodes\n"))
|
mm,migrate: fix establishing demotion target
In commit ac16ec835314 ("mm: migrate: support multiple target nodes
demotion"), after the first demotion target node is found, we will
continue to check the next candidate obtained via find_next_best_node().
This is to find all demotion target nodes with same NUMA distance. But
one side effect of find_next_best_node() is that the candidate node
returned will be set in "used" parameter, even if the candidate node isn't
passed in the following NUMA distance checking, the candidate node will
not be used as demotion target node for the following nodes. For example,
for system as follows,
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
when we establish demotion target node for node 0, in the first round node
2 is added to the demotion target node set. Then in the second round,
node 3 is checked and failed because distance(0, 3) > distance(0, 2). But
node 3 is set in "used" nodemask too. When we establish demotion target
node for node 1, there is no available node. This is wrong, node 3 should
be set as the demotion target of node 1.
To fix this, if the candidate node is failed to pass the distance
checking, it will be cleared in "used" nodemask. So that it can be used
for the following node.
The bug can be reproduced and fixed with this patch on a 2 socket server
machine with DRAM and PMEM.
Link: https://lkml.kernel.org/r/20220128055940.1792614-1-ying.huang@intel.com
Fixes: ac16ec835314 ("mm: migrate: support multiple target nodes demotion")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:05 +08:00
|
|
|
goto out_clear;
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
|
|
|
|
nd->nodes[index] = migration_target;
|
|
|
|
nd->nr++;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
|
|
|
return migration_target;
|
mm,migrate: fix establishing demotion target
In commit ac16ec835314 ("mm: migrate: support multiple target nodes
demotion"), after the first demotion target node is found, we will
continue to check the next candidate obtained via find_next_best_node().
This is to find all demotion target nodes with same NUMA distance. But
one side effect of find_next_best_node() is that the candidate node
returned will be set in "used" parameter, even if the candidate node isn't
passed in the following NUMA distance checking, the candidate node will
not be used as demotion target node for the following nodes. For example,
for system as follows,
node distances:
node 0 1 2 3
0: 10 21 17 28
1: 21 10 28 17
2: 17 28 10 28
3: 28 17 28 10
when we establish demotion target node for node 0, in the first round node
2 is added to the demotion target node set. Then in the second round,
node 3 is checked and failed because distance(0, 3) > distance(0, 2). But
node 3 is set in "used" nodemask too. When we establish demotion target
node for node 1, there is no available node. This is wrong, node 3 should
be set as the demotion target of node 1.
To fix this, if the candidate node is failed to pass the distance
checking, it will be cleared in "used" nodemask. So that it can be used
for the following node.
The bug can be reproduced and fixed with this patch on a 2 socket server
machine with DRAM and PMEM.
Link: https://lkml.kernel.org/r/20220128055940.1792614-1-ying.huang@intel.com
Fixes: ac16ec835314 ("mm: migrate: support multiple target nodes demotion")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 05:46:05 +08:00
|
|
|
out_clear:
|
|
|
|
node_clear(migration_target, *used);
|
|
|
|
return NUMA_NO_NODE;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* When memory fills up on a node, memory contents can be
|
|
|
|
* automatically migrated to another node instead of
|
|
|
|
* discarded at reclaim.
|
|
|
|
*
|
|
|
|
* Establish a "migration path" which will start at nodes
|
|
|
|
* with CPUs and will follow the priorities used to build the
|
|
|
|
* page allocator zonelists.
|
|
|
|
*
|
|
|
|
* The difference here is that cycles must be avoided. If
|
|
|
|
* node0 migrates to node1, then neither node1, nor anything
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
* node1 migrates to can migrate to node0. Also one node can
|
|
|
|
* be migrated to multiple nodes if the target nodes all have
|
|
|
|
* a same best-distance against the source node.
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
*
|
|
|
|
* This function can run simultaneously with readers of
|
|
|
|
* node_demotion[]. However, it can not run simultaneously
|
|
|
|
* with itself. Exclusion is provided by memory hotplug events
|
|
|
|
* being single-threaded.
|
|
|
|
*/
|
|
|
|
static void __set_migration_target_nodes(void)
|
|
|
|
{
|
|
|
|
nodemask_t next_pass = NODE_MASK_NONE;
|
|
|
|
nodemask_t this_pass = NODE_MASK_NONE;
|
|
|
|
nodemask_t used_targets = NODE_MASK_NONE;
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
int node, best_distance;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Avoid any oddities like cycles that could occur
|
|
|
|
* from changes in the topology. This will leave
|
|
|
|
* a momentary gap when migration is disabled.
|
|
|
|
*/
|
|
|
|
disable_all_migrate_targets();
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Allocations go close to CPUs, first. Assume that
|
|
|
|
* the migration path starts at the nodes with CPUs.
|
|
|
|
*/
|
|
|
|
next_pass = node_states[N_CPU];
|
|
|
|
again:
|
|
|
|
this_pass = next_pass;
|
|
|
|
next_pass = NODE_MASK_NONE;
|
|
|
|
/*
|
|
|
|
* To avoid cycles in the migration "graph", ensure
|
|
|
|
* that migration sources are not future targets by
|
|
|
|
* setting them in 'used_targets'. Do this only
|
|
|
|
* once per pass so that multiple source nodes can
|
|
|
|
* share a target node.
|
|
|
|
*
|
|
|
|
* 'used_targets' will become unavailable in future
|
|
|
|
* passes. This limits some opportunities for
|
|
|
|
* multiple source nodes to share a destination.
|
|
|
|
*/
|
|
|
|
nodes_or(used_targets, used_targets, this_pass);
|
|
|
|
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
for_each_node_mask(node, this_pass) {
|
|
|
|
best_distance = -1;
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
|
|
|
|
/*
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
* Try to set up the migration path for the node, and the target
|
|
|
|
* migration nodes can be multiple, so doing a loop to find all
|
|
|
|
* the target nodes if they all have a best node distance.
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
*/
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
do {
|
|
|
|
int target_node =
|
|
|
|
establish_migrate_target(node, &used_targets,
|
|
|
|
best_distance);
|
|
|
|
|
|
|
|
if (target_node == NUMA_NO_NODE)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (best_distance == -1)
|
|
|
|
best_distance = node_distance(node, target_node);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Visit targets from this pass in the next pass.
|
|
|
|
* Eventually, every node will have been part of
|
|
|
|
* a pass, and will become set in 'used_targets'.
|
|
|
|
*/
|
|
|
|
node_set(target_node, next_pass);
|
|
|
|
} while (1);
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
}
|
|
|
|
/*
|
|
|
|
* 'next_pass' contains nodes which became migration
|
|
|
|
* targets in this pass. Make additional passes until
|
|
|
|
* no more migrations targets are available.
|
|
|
|
*/
|
|
|
|
if (!nodes_empty(next_pass))
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For callers that do not hold get_online_mems() already.
|
|
|
|
*/
|
2022-03-23 05:47:37 +08:00
|
|
|
void set_migration_target_nodes(void)
|
mm/numa: automatically generate node migration order
Patch series "Migrate Pages in lieu of discard", v11.
We're starting to see systems with more and more kinds of memory such as
Intel's implementation of persistent memory.
Let's say you have a system with some DRAM and some persistent memory.
Today, once DRAM fills up, reclaim will start and some of the DRAM
contents will be thrown out. Allocations will, at some point, start
falling over to the slower persistent memory.
That has two nasty properties. First, the newer allocations can end up in
the slower persistent memory. Second, reclaimed data in DRAM are just
discarded even if there are gobs of space in persistent memory that could
be used.
This patchset implements a solution to these problems. At the end of the
reclaim process in shrink_page_list() just before the last page refcount
is dropped, the page is migrated to persistent memory instead of being
dropped.
While I've talked about a DRAM/PMEM pairing, this approach would function
in any environment where memory tiers exist.
This is not perfect. It "strands" pages in slower memory and never brings
them back to fast DRAM. Huang Ying has follow-on work which repurposes
NUMA balancing to promote hot pages back to DRAM.
This is also all based on an upstream mechanism that allows persistent
memory to be onlined and used as if it were volatile:
http://lkml.kernel.org/r/20190124231441.37A4A305@viggo.jf.intel.com
With that, the DRAM and PMEM in each socket will be represented as 2
separate NUMA nodes, with the CPUs sit in the DRAM node. So the
general inter-NUMA demotion mechanism introduced in the patchset can
migrate the cold DRAM pages to the PMEM node.
We have tested the patchset with the postgresql and pgbench. On a
2-socket server machine with DRAM and PMEM, the kernel with the patchset
can improve the score of pgbench up to 22.1% compared with that of the
DRAM only + disk case. This comes from the reduced disk read throughput
(which reduces up to 70.8%).
== Open Issues ==
* Memory policies and cpusets that, for instance, restrict allocations
to DRAM can be demoted to PMEM whenever they opt in to this
new mechanism. A cgroup-level API to opt-in or opt-out of
these migrations will likely be required as a follow-on.
* Could be more aggressive about where anon LRU scanning occurs
since it no longer necessarily involves I/O. get_scan_count()
for instance says: "If we have no swap space, do not bother
scanning anon pages"
This patch (of 9):
Prepare for the kernel to auto-migrate pages to other memory nodes with a
node migration table. This allows creating single migration target for
each NUMA node to enable the kernel to do NUMA page migrations instead of
simply discarding colder pages. A node with no target is a "terminal
node", so reclaim acts normally there. The migration target does not
fundamentally _need_ to be a single node, but this implementation starts
there to limit complexity.
When memory fills up on a node, memory contents can be automatically
migrated to another node. The biggest problems are knowing when to
migrate and to where the migration should be targeted.
The most straightforward way to generate the "to where" list would be to
follow the page allocator fallback lists. Those lists already tell us if
memory is full where to look next. It would also be logical to move
memory in that order.
But, the allocator fallback lists have a fatal flaw: most nodes appear in
all the lists. This would potentially lead to migration cycles (A->B,
B->A, A->B, ...).
Instead of using the allocator fallback lists directly, keep a separate
node migration ordering. But, reuse the same data used to generate page
allocator fallback in the first place: find_next_best_node().
This means that the firmware data used to populate node distances
essentially dictates the ordering for now. It should also be
architecture-neutral since all NUMA architectures have a working
find_next_best_node().
RCU is used to allow lock-less read of node_demotion[] and prevent
demotion cycles been observed. If multiple reads of node_demotion[] are
performed, a single rcu_read_lock() must be held over all reads to ensure
no cycles are observed. Details are as follows.
=== What does RCU provide? ===
Imagine a simple loop which walks down the demotion path looking
for the last node:
terminal_node = start_node;
while (node_demotion[terminal_node] != NUMA_NO_NODE) {
terminal_node = node_demotion[terminal_node];
}
The initial values are:
node_demotion[0] = 1;
node_demotion[1] = NUMA_NO_NODE;
and are updated to:
node_demotion[0] = NUMA_NO_NODE;
node_demotion[1] = 0;
What guarantees that the cycle is not observed:
node_demotion[0] = 1;
node_demotion[1] = 0;
and would loop forever?
With RCU, a rcu_read_lock/unlock() can be placed around the loop. Since
the write side does a synchronize_rcu(), the loop that observed the old
contents is known to be complete before the synchronize_rcu() has
completed.
RCU, combined with disable_all_migrate_targets(), ensures that the old
migration state is not visible by the time __set_migration_target_nodes()
is called.
=== What does READ_ONCE() provide? ===
READ_ONCE() forbids the compiler from merging or reordering successive
reads of node_demotion[]. This ensures that any updates are *eventually*
observed.
Consider the above loop again. The compiler could theoretically read the
entirety of node_demotion[] into local storage (registers) and never go
back to memory, and *permanently* observe bad values for node_demotion[].
Note: RCU does not provide any universal compiler-ordering
guarantees:
https://lore.kernel.org/lkml/20150921204327.GH4029@linux.vnet.ibm.com/
This code is unused for now. It will be called later in the
series.
Link: https://lkml.kernel.org/r/20210721063926.3024591-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20210715055145.195411-2-ying.huang@intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 05:59:06 +08:00
|
|
|
{
|
|
|
|
get_online_mems();
|
|
|
|
__set_migration_target_nodes();
|
|
|
|
put_online_mems();
|
|
|
|
}
|
2021-09-03 05:59:09 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This leaves migrate-on-reclaim transiently disabled between
|
|
|
|
* the MEM_GOING_OFFLINE and MEM_OFFLINE events. This runs
|
|
|
|
* whether reclaim-based migration is enabled or not, which
|
|
|
|
* ensures that the user can turn reclaim-based migration at
|
|
|
|
* any time without needing to recalculate migration targets.
|
|
|
|
*
|
|
|
|
* These callbacks already hold get_online_mems(). That is why
|
|
|
|
* __set_migration_target_nodes() can be used as opposed to
|
|
|
|
* set_migration_target_nodes().
|
|
|
|
*/
|
|
|
|
static int __meminit migrate_on_reclaim_callback(struct notifier_block *self,
|
2021-10-19 06:15:29 +08:00
|
|
|
unsigned long action, void *_arg)
|
2021-09-03 05:59:09 +08:00
|
|
|
{
|
2021-10-19 06:15:29 +08:00
|
|
|
struct memory_notify *arg = _arg;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Only update the node migration order when a node is
|
|
|
|
* changing status, like online->offline. This avoids
|
|
|
|
* the overhead of synchronize_rcu() in most cases.
|
|
|
|
*/
|
|
|
|
if (arg->status_change_nid < 0)
|
|
|
|
return notifier_from_errno(0);
|
|
|
|
|
2021-09-03 05:59:09 +08:00
|
|
|
switch (action) {
|
|
|
|
case MEM_GOING_OFFLINE:
|
|
|
|
/*
|
|
|
|
* Make sure there are not transient states where
|
|
|
|
* an offline node is a migration target. This
|
|
|
|
* will leave migration disabled until the offline
|
|
|
|
* completes and the MEM_OFFLINE case below runs.
|
|
|
|
*/
|
|
|
|
disable_all_migrate_targets();
|
|
|
|
break;
|
|
|
|
case MEM_OFFLINE:
|
|
|
|
case MEM_ONLINE:
|
|
|
|
/*
|
|
|
|
* Recalculate the target nodes once the node
|
|
|
|
* reaches its final state (online or offline).
|
|
|
|
*/
|
|
|
|
__set_migration_target_nodes();
|
|
|
|
break;
|
|
|
|
case MEM_CANCEL_OFFLINE:
|
|
|
|
/*
|
|
|
|
* MEM_GOING_OFFLINE disabled all the migration
|
|
|
|
* targets. Reenable them.
|
|
|
|
*/
|
|
|
|
__set_migration_target_nodes();
|
|
|
|
break;
|
|
|
|
case MEM_GOING_ONLINE:
|
|
|
|
case MEM_CANCEL_ONLINE:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return notifier_from_errno(0);
|
|
|
|
}
|
|
|
|
|
2022-03-23 05:47:37 +08:00
|
|
|
void __init migrate_on_reclaim_init(void)
|
2021-10-19 06:15:32 +08:00
|
|
|
{
|
mm: migrate: support multiple target nodes demotion
We have some machines with multiple memory types like below, which have
one fast (DRAM) memory node and two slow (persistent memory) memory
nodes. According to current node demotion policy, if node 0 fills up,
its memory should be migrated to node 1, when node 1 fills up, its
memory will be migrated to node 2: node 0 -> node 1 -> node 2 ->stop.
But this is not efficient and suitbale memory migration route for our
machine with multiple slow memory nodes. Since the distance between
node 0 to node 1 and node 0 to node 2 is equal, and memory migration
between slow memory nodes will increase persistent memory bandwidth
greatly, which will hurt the whole system's performance.
Thus for this case, we can treat the slow memory node 1 and node 2 as a
whole slow memory region, and we should migrate memory from node 0 to
node 1 and node 2 if node 0 fills up.
This patch changes the node_demotion data structure to support multiple
target nodes, and establishes the migration path to support multiple
target nodes with validating if the node distance is the best or not.
available: 3 nodes (0-2)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 62153 MB
node 0 free: 55135 MB
node 1 cpus:
node 1 size: 127007 MB
node 1 free: 126930 MB
node 2 cpus:
node 2 size: 126968 MB
node 2 free: 126878 MB
node distances:
node 0 1 2
0: 10 20 20
1: 20 10 20
2: 20 20 10
Link: https://lkml.kernel.org/r/00728da107789bb4ed9e0d28b1d08fd8056af2ef.1636697263.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 06:08:43 +08:00
|
|
|
node_demotion = kmalloc_array(nr_node_ids,
|
|
|
|
sizeof(struct demotion_nodes),
|
|
|
|
GFP_KERNEL);
|
|
|
|
WARN_ON(!node_demotion);
|
|
|
|
|
2022-03-23 05:47:37 +08:00
|
|
|
hotplug_memory_notifier(migrate_on_reclaim_callback, 100);
|
2021-09-03 05:59:09 +08:00
|
|
|
/*
|
2022-03-23 05:47:37 +08:00
|
|
|
* At this point, all numa nodes with memory/CPus have their state
|
|
|
|
* properly set, so we can build the demotion order now.
|
|
|
|
* Let us hold the cpu_hotplug lock just, as we could possibily have
|
|
|
|
* CPU hotplug events during boot.
|
2021-09-03 05:59:09 +08:00
|
|
|
*/
|
2022-03-23 05:47:37 +08:00
|
|
|
cpus_read_lock();
|
|
|
|
set_migration_target_nodes();
|
|
|
|
cpus_read_unlock();
|
2021-09-03 05:59:09 +08:00
|
|
|
}
|
2021-10-19 06:15:32 +08:00
|
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
2021-11-06 04:43:35 +08:00
|
|
|
|
|
|
|
bool numa_demotion_enabled = false;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYSFS
|
|
|
|
static ssize_t numa_demotion_enabled_show(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
return sysfs_emit(buf, "%s\n",
|
|
|
|
numa_demotion_enabled ? "true" : "false");
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t numa_demotion_enabled_store(struct kobject *kobj,
|
|
|
|
struct kobj_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
if (!strncmp(buf, "true", 4) || !strncmp(buf, "1", 1))
|
|
|
|
numa_demotion_enabled = true;
|
|
|
|
else if (!strncmp(buf, "false", 5) || !strncmp(buf, "0", 1))
|
|
|
|
numa_demotion_enabled = false;
|
|
|
|
else
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct kobj_attribute numa_demotion_enabled_attr =
|
|
|
|
__ATTR(demotion_enabled, 0644, numa_demotion_enabled_show,
|
|
|
|
numa_demotion_enabled_store);
|
|
|
|
|
|
|
|
static struct attribute *numa_attrs[] = {
|
|
|
|
&numa_demotion_enabled_attr.attr,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct attribute_group numa_attr_group = {
|
|
|
|
.attrs = numa_attrs,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init numa_init_sysfs(void)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
struct kobject *numa_kobj;
|
|
|
|
|
|
|
|
numa_kobj = kobject_create_and_add("numa", mm_kobj);
|
|
|
|
if (!numa_kobj) {
|
|
|
|
pr_err("failed to create numa kobject\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
err = sysfs_create_group(numa_kobj, &numa_attr_group);
|
|
|
|
if (err) {
|
|
|
|
pr_err("failed to register numa group\n");
|
|
|
|
goto delete_obj;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
delete_obj:
|
|
|
|
kobject_put(numa_kobj);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
subsys_initcall(numa_init_sysfs);
|
|
|
|
#endif
|