OpenCloudOS-Kernel/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

2697 lines
67 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
*
* Copyright (C) 2009-2011 Nokia Corporation
* Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* The data in this file should be completely autogeneratable from
* the TI hardware database or other technical documentation.
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <linux/platform_data/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/hsmmc-omap.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-01 01:59:07 +08:00
#include "soc.h"
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "i2c.h"
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism The OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly. Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device. To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog. Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)" Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-22 06:39:15 +08:00
#include "wd_timer.h"
#include "serial.h"
/*
* OMAP3xxx hardware module integration data
*
* All of the data in this section should be autogeneratable from the
* TI hardware database or other technical documentation. Data that
* is driver-specific or driver-kernel integration-specific belongs
* elsewhere.
*/
#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000
/*
* IP blocks
*/
/* L3 */
static struct omap_hwmod omap3xxx_l3_main_hwmod = {
.name = "l3_main",
.class = &l3_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* L4 CORE */
static struct omap_hwmod omap3xxx_l4_core_hwmod = {
.name = "l4_core",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* L4 PER */
static struct omap_hwmod omap3xxx_l4_per_hwmod = {
.name = "l4_per",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* L4 WKUP */
static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
.name = "l4_wkup",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* L4 SEC */
static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
.name = "l4_sec",
.class = &l4_hwmod_class,
.flags = HWMOD_NO_IDLEST,
};
/* MPU */
static struct omap_hwmod omap3xxx_mpu_hwmod = {
.name = "mpu",
.class = &mpu_hwmod_class,
.main_clk = "arm_fck",
};
/* IVA2 (IVA2) */
static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
{ .name = "logic", .rst_shift = 0, .st_shift = 8 },
{ .name = "seq0", .rst_shift = 1, .st_shift = 9 },
{ .name = "seq1", .rst_shift = 2, .st_shift = 10 },
};
static struct omap_hwmod omap3xxx_iva_hwmod = {
.name = "iva",
.class = &iva_hwmod_class,
.clkdm_name = "iva2_clkdm",
.rst_lines = omap3xxx_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
.main_clk = "iva2_ck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_IVA2_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
},
},
};
/*
* 'debugss' class
* debug and emulation sub system
*/
static struct omap_hwmod_class omap3xxx_debugss_hwmod_class = {
.name = "debugss",
};
/* debugss */
static struct omap_hwmod omap3xxx_debugss_hwmod = {
.name = "debugss",
.class = &omap3xxx_debugss_hwmod_class,
.clkdm_name = "emu_clkdm",
.main_clk = "emu_src_ck",
.flags = HWMOD_NO_IDLEST,
};
/* timer class */
static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
.name = "timer",
.sysc = &omap3xxx_timer_sysc,
};
/* timer3 */
static struct omap_hwmod omap3xxx_timer3_hwmod = {
.name = "timer3",
.main_clk = "gpt3_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer4 */
static struct omap_hwmod omap3xxx_timer4_hwmod = {
.name = "timer4",
.main_clk = "gpt4_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer5 */
static struct omap_hwmod omap3xxx_timer5_hwmod = {
.name = "timer5",
.main_clk = "gpt5_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer6 */
static struct omap_hwmod omap3xxx_timer6_hwmod = {
.name = "timer6",
.main_clk = "gpt6_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer7 */
static struct omap_hwmod omap3xxx_timer7_hwmod = {
.name = "timer7",
.main_clk = "gpt7_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer8 */
static struct omap_hwmod omap3xxx_timer8_hwmod = {
.name = "timer8",
.main_clk = "gpt8_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer9 */
static struct omap_hwmod omap3xxx_timer9_hwmod = {
.name = "timer9",
.main_clk = "gpt9_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer10 */
static struct omap_hwmod omap3xxx_timer10_hwmod = {
.name = "timer10",
.main_clk = "gpt10_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/* timer11 */
static struct omap_hwmod omap3xxx_timer11_hwmod = {
.name = "timer11",
.main_clk = "gpt11_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
.class = &omap3xxx_timer_hwmod_class,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
/*
* 'wd_timer' class
* 32-bit watchdog upward counter that generates a pulse on the reset pin on
* overflow condition
*/
static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x20,
.syss_offs = 0x10,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
.name = "wd_timer",
.sysc = &omap3xxx_wd_timer_sysc,
ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset Without runtime PM enabled, hwmod needs to leave all IP blocks in an enabled state by default so any driver access to the HW will succeed. This is accomplished by seting the postsetup_state to enabled for all hwmods during init when runtime PM is disabled. Currently, we have a special case for WDT in that its postsetup_state is always set to disabled. This is done so that the WDT is disabled and the timer is disarmed at boot in case there is no WDT driver. This also means that when runtime PM is disabled, if a WDT driver *is* built in the kernel, the kernel will crash on the first access to the WDT hardware. We can't simply leave the WDT module enabled, because the timer is armed by default after reset. That means that if there is no WDT driver initialzed or loaded before the timer expires, the kernel will reboot. To fix this, a custom reset method is added to the watchdog class of omap_hwmod. This method will *always* disarm the timer after hwmod reset. The WDT timer then will only be rearmed when/if the driver is loaded for the WDT. With the timer disarmed by default, we no longer need a special-case for the postsetup_state of WDT during init, so it is removed. Any platforms wishing to ensure the watchdog remains armed across the entire boot boot can simply disable the reset-on-init feature of the watchdog hwmod using omap_hwmod_no_setup_reset(). Tested on 3530/Overo, 4430/Panda. NOTE: on 4430, the hwmod OCP reset does not seem to rearm the timer as documented in the TRM (and what happens on OMAP3.) I noticed this because testing the HWMOD_INIT_NO_RESET feature with no driver loaded, I expected a reboot part way through the boot, but did not see a reboot. Adding some debug to read the counter, I verified that right after OCP softreset, the counter is not firing. After writing the magic start sequence, the timer starts counting. This means that the timer disarm sequence added here does not seem to be needed for 4430, but is technically the correct way to ensure the timer is disarmed, so it is left in for OMAP4. Special thanks to Paul Walmsley for helping brainstorm ideas to fix this problem. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: updated the omap2_wd_timer_reset() function in the wake of commit 3c55c1baffa5f719eb2ae9729088bc867f972f53 ("ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status""); added kerneldoc; rolled in warning fix from Kevin] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-05-09 01:34:30 +08:00
.pre_shutdown = &omap2_wd_timer_disable,
.reset = &omap2_wd_timer_reset,
};
static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
.name = "wd_timer2",
.class = &omap3xxx_wd_timer_hwmod_class,
.main_clk = "wdt2_fck",
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
},
},
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
*/
.flags = HWMOD_SWSUP_SIDLE,
};
/* UART1 */
static struct omap_hwmod omap3xxx_uart1_hwmod = {
.name = "uart1",
.main_clk = "uart1_fck",
.flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
},
},
.class = &omap2_uart_class,
};
/* UART2 */
static struct omap_hwmod omap3xxx_uart2_hwmod = {
.name = "uart2",
.main_clk = "uart2_fck",
.flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
},
},
.class = &omap2_uart_class,
};
/* UART3 */
static struct omap_hwmod omap3xxx_uart3_hwmod = {
.name = "uart3",
.main_clk = "uart3_fck",
.flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
HWMOD_SWSUP_SIDLE,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
},
},
.class = &omap2_uart_class,
};
/* UART4 */
static struct omap_hwmod omap36xx_uart4_hwmod = {
.name = "uart4",
.main_clk = "uart4_fck",
.flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
},
},
.class = &omap2_uart_class,
};
/*
* XXX AM35xx UART4 cannot complete its softreset without uart1_fck or
* uart2_fck being enabled. So we add uart1_fck as an optional clock,
* below, and set the HWMOD_CONTROL_OPT_CLKS_IN_RESET. This really
* should not be needed. The functional clock structure of the AM35xx
* UART4 is extremely unclear and opaque; it is unclear what the role
* of uart1/2_fck is for the UART4. Any clarification from either
* empirical testing or the AM3505/3517 hardware designers would be
* most welcome.
*/
static struct omap_hwmod_opt_clk am35xx_uart4_opt_clks[] = {
{ .role = "softreset_uart1_fck", .clk = "uart1_fck" },
};
static struct omap_hwmod am35xx_uart4_hwmod = {
.name = "uart4",
.main_clk = "uart4_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = AM35XX_ST_UART4_SHIFT,
},
},
.opt_clks = am35xx_uart4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(am35xx_uart4_opt_clks),
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_uart_class,
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
.reset = &omap_i2c_reset,
};
/* dss */
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
{ .role = "tv_clk", .clk = "dss_tv_fck" },
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
.name = "dss_core",
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
.idlest_reg_id = 1,
},
},
.opt_clks = dss_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.name = "dss_core",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT,
},
},
.opt_clks = dss_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
};
/*
* 'dispc' class
* display controller
*/
static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSC_HAS_ENAWAKEUP),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3_dispc_hwmod_class = {
.name = "dispc",
.sysc = &omap3_dispc_sysc,
};
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap3_dispc_hwmod_class,
.main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr,
};
/*
* 'dsi' class
* display serial interface controller
*/
static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
.name = "dsi",
.sysc = &omap3xxx_dsi_sysc,
};
/* dss_dsi1 */
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
};
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
.main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
.main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_venc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
.flags = HWMOD_NO_IDLEST,
};
/* I2C1 */
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
},
},
.class = &i2c_class,
};
/* I2C2 */
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
},
},
.class = &i2c_class,
};
/* I2C3 */
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.main_clk = "i2c3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
},
},
.class = &i2c_class,
};
/*
* 'gpio' class
* general purpose io module
*/
static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
.name = "gpio",
.sysc = &omap3xxx_gpio_sysc,
};
/* gpio1 */
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbck", },
};
static struct omap_hwmod omap3xxx_gpio1_hwmod = {
.name = "gpio1",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio1_ick",
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/* gpio2 */
static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio2_dbck", },
};
static struct omap_hwmod omap3xxx_gpio2_hwmod = {
.name = "gpio2",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio2_ick",
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/* gpio3 */
static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio3_dbck", },
};
static struct omap_hwmod omap3xxx_gpio3_hwmod = {
.name = "gpio3",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio3_ick",
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/* gpio4 */
static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio4_dbck", },
};
static struct omap_hwmod omap3xxx_gpio4_hwmod = {
.name = "gpio4",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio4_ick",
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/* gpio5 */
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio5_dbck", },
};
static struct omap_hwmod omap3xxx_gpio5_hwmod = {
.name = "gpio5",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio5_ick",
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/* gpio6 */
static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio6_dbck", },
};
static struct omap_hwmod omap3xxx_gpio6_hwmod = {
.name = "gpio6",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "gpio6_ick",
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
},
},
.class = &omap3xxx_gpio_hwmod_class,
};
/*
* 'mcbsp' class
* multi channel buffered serial port controller
*/
static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
.rev_offs = -ENODEV,
.sysc_offs = 0x008c,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap3xxx_mcbsp_sysc,
};
/* McBSP functional clock mapping */
static struct omap_hwmod_opt_clk mcbsp15_opt_clks[] = {
{ .role = "pad_fck", .clk = "mcbsp_clks" },
{ .role = "prcm_fck", .clk = "core_96m_fck" },
};
static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
{ .role = "pad_fck", .clk = "mcbsp_clks" },
{ .role = "prcm_fck", .clk = "per_96m_fck" },
};
/* mcbsp1 */
static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap3xxx_mcbsp_hwmod_class,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
},
},
.opt_clks = mcbsp15_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks),
};
/* mcbsp2 */
static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap3xxx_mcbsp_hwmod_class,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
},
},
.opt_clks = mcbsp234_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
};
/* mcbsp3 */
static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
.name = "mcbsp3",
.class = &omap3xxx_mcbsp_hwmod_class,
.main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
},
},
.opt_clks = mcbsp234_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
};
/* mcbsp4 */
static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
.name = "mcbsp4",
.class = &omap3xxx_mcbsp_hwmod_class,
.main_clk = "mcbsp4_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
},
},
.opt_clks = mcbsp234_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp234_opt_clks),
};
/* mcbsp5 */
static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
.name = "mcbsp5",
.class = &omap3xxx_mcbsp_hwmod_class,
.main_clk = "mcbsp5_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
},
},
.opt_clks = mcbsp15_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp15_opt_clks),
};
/* 'mcbsp sidetone' class */
static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = {
.rev_offs = -ENODEV,
.sysc_offs = 0x0010,
.sysc_flags = SYSC_HAS_AUTOIDLE,
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
.name = "mcbsp_sidetone",
.sysc = &omap3xxx_mcbsp_sidetone_sysc,
};
/* mcbsp2_sidetone */
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
.name = "mcbsp2_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
.main_clk = "mcbsp2_ick",
.flags = HWMOD_NO_IDLEST,
};
/* mcbsp3_sidetone */
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
.name = "mcbsp3_sidetone",
.class = &omap3xxx_mcbsp_sidetone_hwmod_class,
.main_clk = "mcbsp3_ick",
.flags = HWMOD_NO_IDLEST,
};
/* SR common */
static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
.rev_offs = -ENODEV,
.sysc_offs = 0x24,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
.sysc_fields = &omap34xx_sr_sysc_fields,
};
static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
.name = "smartreflex",
.sysc = &omap34xx_sr_sysc,
};
static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
.rev_offs = -ENODEV,
.sysc_offs = 0x38,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
SYSC_NO_CACHE),
.sysc_fields = &omap36xx_sr_sysc_fields,
};
static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
.name = "smartreflex",
.sysc = &omap36xx_sr_sysc,
};
/* SR1 */
static struct omap_smartreflex_dev_attr sr1_dev_attr = {
.sensor_voltdm_name = "mpu_iva",
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
.name = "smartreflex_mpu_iva",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
},
},
.dev_attr = &sr1_dev_attr,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
static struct omap_hwmod omap36xx_sr1_hwmod = {
.name = "smartreflex_mpu_iva",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
},
},
.dev_attr = &sr1_dev_attr,
};
/* SR2 */
static struct omap_smartreflex_dev_attr sr2_dev_attr = {
.sensor_voltdm_name = "core",
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
.name = "smartreflex_core",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
},
},
.dev_attr = &sr2_dev_attr,
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
static struct omap_hwmod omap36xx_sr2_hwmod = {
.name = "smartreflex_core",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr2_fck",
.prcm = {
.omap2 = {
.module_offs = WKUP_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
},
},
.dev_attr = &sr2_dev_attr,
};
/*
* 'mailbox' class
* mailbox module allowing communication between the on-chip processors
* using a queued mailbox-interrupt mechanism.
*/
static struct omap_hwmod_class_sysconfig omap3xxx_mailbox_sysc = {
.rev_offs = 0x000,
.sysc_offs = 0x010,
.syss_offs = 0x014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
.name = "mailbox",
.sysc = &omap3xxx_mailbox_sysc,
};
static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.name = "mailbox",
.class = &omap3xxx_mailbox_hwmod_class,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
};
/*
* 'mcspi' class
* multichannel serial port interface (mcspi) / master/slave synchronous serial
* bus
*/
static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap34xx_mcspi_class = {
.name = "mcspi",
.sysc = &omap34xx_mcspi_sysc,
};
/* mcspi1 */
static struct omap_hwmod omap34xx_mcspi1 = {
.name = "mcspi1",
.main_clk = "mcspi1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT,
},
},
.class = &omap34xx_mcspi_class,
};
/* mcspi2 */
static struct omap_hwmod omap34xx_mcspi2 = {
.name = "mcspi2",
.main_clk = "mcspi2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT,
},
},
.class = &omap34xx_mcspi_class,
};
/* mcspi3 */
static struct omap_hwmod omap34xx_mcspi3 = {
.name = "mcspi3",
.main_clk = "mcspi3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT,
},
},
.class = &omap34xx_mcspi_class,
};
/* mcspi4 */
static struct omap_hwmod omap34xx_mcspi4 = {
.name = "mcspi4",
.main_clk = "mcspi4_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT,
},
},
.class = &omap34xx_mcspi_class,
};
/* usbhsotg */
static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
.rev_offs = 0x0400,
.sysc_offs = 0x0404,
.syss_offs = 0x0408,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class usbotg_class = {
.name = "usbotg",
.sysc = &omap3xxx_usbhsotg_sysc,
};
/* usb_otg_hs */
static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
.name = "usb_otg_hs",
.main_clk = "hsotgusb_ick",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
},
},
.class = &usbotg_class,
/*
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
*
* Enabling the device in any other MIDLEMODE setting but force-idle
* causes core_pwrdm not enter idle states at least on OMAP3630.
* Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
* signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE |
HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN,
};
/* usb_otg_hs */
static struct omap_hwmod_class am35xx_usbotg_class = {
.name = "am35xx_usbotg",
};
static struct omap_hwmod am35xx_usbhsotg_hwmod = {
.name = "am35x_otg_hs",
.main_clk = "hsotgusb_fck",
.class = &am35xx_usbotg_class,
.flags = HWMOD_NO_IDLEST,
};
/* MMC/SD/SDIO common */
static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
.rev_offs = 0x1fc,
.sysc_offs = 0x10,
.syss_offs = 0x14,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap34xx_mmc_class = {
.name = "mmc",
.sysc = &omap34xx_mmc_sysc,
};
/* MMC/SD/SDIO1 */
static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
};
static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
.name = "mmc1",
.opt_clks = omap34xx_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
},
},
.dev_attr = &mmc1_pre_es3_dev_attr,
.class = &omap34xx_mmc_class,
};
static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
.name = "mmc1",
.opt_clks = omap34xx_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
},
},
.dev_attr = &mmc1_dev_attr,
.class = &omap34xx_mmc_class,
};
/* MMC/SD/SDIO2 */
static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
.name = "mmc2",
.opt_clks = omap34xx_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
},
},
.dev_attr = &mmc2_pre_es3_dev_attr,
.class = &omap34xx_mmc_class,
};
static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
.name = "mmc2",
.opt_clks = omap34xx_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
},
},
.class = &omap34xx_mmc_class,
};
/* MMC/SD/SDIO3 */
static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
{ .role = "dbck", .clk = "omap_32k_fck", },
};
static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.name = "mmc3",
.opt_clks = omap34xx_mmc3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks),
.main_clk = "mmchs3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
},
},
.class = &omap34xx_mmc_class,
};
/*
* 'usb_host_hs' class
* high-speed multi-port usb host controller
*/
static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
.name = "usb_host_hs",
.sysc = &omap3xxx_usb_host_hs_sysc,
};
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
.name = "usb_host_hs",
.class = &omap3xxx_usb_host_hs_hwmod_class,
.clkdm_name = "usbhost_clkdm",
.main_clk = "usbhost_48m_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430ES2_USBHOST_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
},
},
/*
* Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
* id: i660
*
* Description:
* In the following configuration :
* - USBHOST module is set to smart-idle mode
* - PRCM asserts idle_req to the USBHOST module ( This typically
* happens when the system is going to a low power mode : all ports
* have been suspended, the master part of the USBHOST module has
* entered the standby state, and SW has cut the functional clocks)
* - an USBHOST interrupt occurs before the module is able to answer
* idle_ack, typically a remote wakeup IRQ.
* Then the USB HOST module will enter a deadlock situation where it
* is no more accessible nor functional.
*
* Workaround:
* Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
*/
/*
* Errata: USB host EHCI may stall when entering smart-standby mode
* Id: i571
*
* Description:
* When the USBHOST module is set to smart-standby mode, and when it is
* ready to enter the standby state (i.e. all ports are suspended and
* all attached devices are in suspend mode), then it can wrongly assert
* the Mstandby signal too early while there are still some residual OCP
* transactions ongoing. If this condition occurs, the internal state
* machine may go to an undefined state and the USB link may be stuck
* upon the next resume.
*
* Workaround:
* Don't use smart standby; use only force standby,
* hence HWMOD_SWSUP_MSTANDBY
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
* 'usb_tll_hs' class
* usb_tll_hs module is the adapter on the usb_host_hs ports
*/
static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
.name = "usb_tll_hs",
.sysc = &omap3xxx_usb_tll_hs_sysc,
};
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
.name = "usb_tll_hs",
.class = &omap3xxx_usb_tll_hs_hwmod_class,
.clkdm_name = "core_l4_clkdm",
.main_clk = "usbtll_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 3,
.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
},
},
};
static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
.name = "hdq1w",
.main_clk = "hdq_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_HDQ_SHIFT,
},
},
.class = &omap2_hdq1w_class,
};
/* SAD2D */
static struct omap_hwmod_rst_info omap3xxx_sad2d_resets[] = {
{ .name = "rst_modem_pwron_sw", .rst_shift = 0 },
{ .name = "rst_modem_sw", .rst_shift = 1 },
};
static struct omap_hwmod_class omap3xxx_sad2d_class = {
.name = "sad2d",
};
static struct omap_hwmod omap3xxx_sad2d_hwmod = {
.name = "sad2d",
.rst_lines = omap3xxx_sad2d_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_sad2d_resets),
.main_clk = "sad2d_ick",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_SAD2D_SHIFT,
},
},
.class = &omap3xxx_sad2d_class,
};
/*
* 'gpmc' class
* general purpose memory controller
*/
static struct omap_hwmod_class_sysconfig omap3xxx_gpmc_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = {
.name = "gpmc",
.sysc = &omap3xxx_gpmc_sysc,
};
static struct omap_hwmod omap3xxx_gpmc_hwmod = {
.name = "gpmc",
.class = &omap3xxx_gpmc_hwmod_class,
.clkdm_name = "core_l3_clkdm",
.main_clk = "gpmc_fck",
/* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
.flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
};
/*
* interfaces
*/
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L3 -> L4_PER interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_l4_per_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
.master = &omap3xxx_mpu_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.user = OCP_USER_MPU,
};
/* l3 -> debugss */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_debugss = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_debugss_hwmod,
.user = OCP_USER_MPU,
};
/* DSS -> l3 */
static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = {
.master = &omap3430es1_dss_core_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
.master = &omap3xxx_dss_core_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.fw = {
.omap2 = {
.l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS,
.flags = OMAP_FIREWALL_L3,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l3_core -> usbhsotg interface */
static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
.master = &omap3xxx_usbhsotg_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU,
};
/* l3_core -> am35xx_usbhsotg interface */
static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
.master = &am35xx_usbhsotg_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "hsotgusb_ick",
.user = OCP_USER_MPU,
};
/* l3_core -> sad2d interface */
static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
.master = &omap3xxx_sad2d_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU,
};
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> MMC1 interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_pre_es3_mmc1_hwmod,
.clk = "mmchs1_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_es3plus_mmc1_hwmod,
.clk = "mmchs1_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> MMC2 interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_pre_es3_mmc2_hwmod,
.clk = "mmchs2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_es3plus_mmc2_hwmod,
.clk = "mmchs2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> MMC3 interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mmc3_hwmod,
.clk = "mmchs3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4,
};
/* L4 CORE -> UART1 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart1_hwmod,
.clk = "uart1_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> UART2 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_uart2_hwmod,
.clk = "uart2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART3 interface */
static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_uart3_hwmod,
.clk = "uart3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 PER -> UART4 interface */
static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap36xx_uart4_hwmod,
.clk = "uart4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* AM35xx: L4 CORE -> UART4 interface */
static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_uart4_hwmod,
.clk = "uart4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c1_hwmod,
.clk = "i2c1_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C2 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c2_hwmod,
.clk = "i2c2_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C3 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c3_hwmod,
.clk = "i2c3_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> SR1 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr1_hwmod,
.clk = "sr_l4_ick",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr1_hwmod,
.clk = "sr_l4_ick",
.user = OCP_USER_MPU,
};
/* L4 CORE -> SR2 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_sr2_hwmod,
.clk = "sr_l4_ick",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap36xx_sr2_hwmod,
.clk = "sr_l4_ick",
.user = OCP_USER_MPU,
};
/* l4_core -> usbhsotg */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usbhsotg_hwmod,
.clk = "l4_ick",
.user = OCP_USER_MPU,
};
/* l4_core -> usbhsotg */
static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_usbhsotg_hwmod,
.clk = "hsotgusb_ick",
.user = OCP_USER_MPU,
};
/* L4_WKUP -> L4_SEC interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_l4_sec_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* IVA2 <- L3 interface */
static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_iva_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer3_hwmod,
.clk = "gpt3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer4 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer4_hwmod,
.clk = "gpt4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer5 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer5_hwmod,
.clk = "gpt5_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer6 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer6_hwmod,
.clk = "gpt6_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer7 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer7_hwmod,
.clk = "gpt7_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer8 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer8_hwmod,
.clk = "gpt8_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> timer9 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_timer9_hwmod,
.clk = "gpt9_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> timer10 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_timer10_hwmod,
.clk = "gpt10_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> timer11 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_timer11_hwmod,
.clk = "gpt11_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_wd_timer2_hwmod,
.clk = "wdt2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dss */
static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3430es1_dss_core_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_core_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dispc_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dss_dsi1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dsi1_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dss_rfbi */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_rfbi_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
.flags = OMAP_FIREWALL_L4,
},
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dss_venc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
.clk = "dss_ick",
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
.flags = OMAP_FIREWALL_L4,
},
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
.master = &omap3xxx_l4_wkup_hwmod,
.slave = &omap3xxx_gpio1_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio2_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio3_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/*
* 'mmu' class
* The memory management unit performs virtual to physical address translation
* for its requestors.
*/
static struct omap_hwmod_class_sysconfig mmu_sysc = {
.rev_offs = 0x000,
.sysc_offs = 0x010,
.syss_offs = 0x014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
.name = "mmu",
.sysc = &mmu_sysc,
};
/* mmu isp */
static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
/* l4_core -> mmu isp */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mmu_isp_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
.name = "mmu_isp",
.class = &omap3xxx_mmu_hwmod_class,
.main_clk = "cam_ick",
.flags = HWMOD_NO_IDLEST,
};
/* mmu iva */
static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
{ .name = "mmu", .rst_shift = 1, .st_shift = 9 },
};
/* l3_main -> iva mmu */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_mmu_iva_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
.name = "mmu_iva",
.class = &omap3xxx_mmu_hwmod_class,
.clkdm_name = "iva2_clkdm",
.rst_lines = omap3xxx_mmu_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets),
.main_clk = "iva2_ck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430_IVA2_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
},
},
.flags = HWMOD_NO_IDLEST,
};
/* l4_per -> gpio4 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio4_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio5 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio5_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> gpio6 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_gpio6_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcbsp2 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcbsp3 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp3_hwmod,
.clk = "mcbsp3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcbsp4 */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp4_hwmod,
.clk = "mcbsp4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp5 */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mcbsp5_hwmod,
.clk = "mcbsp5_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_per -> mcbsp2_sidetone */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp2_sidetone_hwmod,
.clk = "mcbsp2_ick",
.user = OCP_USER_MPU,
};
/* l4_per -> mcbsp3_sidetone */
static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
.master = &omap3xxx_l4_per_hwmod,
.slave = &omap3xxx_mcbsp3_sidetone_hwmod,
.clk = "mcbsp3_ick",
.user = OCP_USER_MPU,
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mailbox_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 core -> mcspi1 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi1,
.clk = "mcspi1_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 core -> mcspi2 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi2,
.clk = "mcspi2_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 core -> mcspi3 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi3,
.clk = "mcspi3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4 core -> mcspi4 interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap34xx_mcspi4,
.clk = "mcspi4_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
.master = &omap3xxx_usb_host_hs_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_host_hs_hwmod,
.clk = "usbhost_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_tll_hs_hwmod,
.clk = "usbtll_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> hdq1w interface */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_hdq1w_hwmod,
.clk = "hdq_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
/* am35xx has Davinci MDIO & EMAC */
static struct omap_hwmod_class am35xx_mdio_class = {
.name = "davinci_mdio",
};
static struct omap_hwmod am35xx_mdio_hwmod = {
.name = "davinci_mdio",
.class = &am35xx_mdio_class,
.flags = HWMOD_NO_IDLEST,
};
/*
* XXX Should be connected to an IPSS hwmod, not the L3 directly;
* but this will probably require some additional hwmod core support,
* so is left as a future to-do item.
*/
static struct omap_hwmod_ocp_if am35xx_mdio__l3 = {
.master = &am35xx_mdio_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "emac_fck",
.user = OCP_USER_MPU,
};
/* l4_core -> davinci mdio */
/*
* XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
* but this will probably require some additional hwmod core support,
* so is left as a future to-do item.
*/
static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_mdio_hwmod,
.clk = "emac_fck",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_class am35xx_emac_class = {
.name = "davinci_emac",
};
static struct omap_hwmod am35xx_emac_hwmod = {
.name = "davinci_emac",
.class = &am35xx_emac_class,
/*
* According to Mark Greer, the MPU will not return from WFI
* when the EMAC signals an interrupt.
* http://www.spinics.net/lists/arm-kernel/msg174734.html
*/
.flags = (HWMOD_NO_IDLEST | HWMOD_BLOCK_WFI),
};
/* l3_core -> davinci emac interface */
/*
* XXX Should be connected to an IPSS hwmod, not the L3 directly;
* but this will probably require some additional hwmod core support,
* so is left as a future to-do item.
*/
static struct omap_hwmod_ocp_if am35xx_emac__l3 = {
.master = &am35xx_emac_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "emac_ick",
.user = OCP_USER_MPU,
};
/* l4_core -> davinci emac */
/*
* XXX Should be connected to an IPSS hwmod, not the L4_CORE directly;
* but this will probably require some additional hwmod core support,
* so is left as a future to-do item.
*/
static struct omap_hwmod_ocp_if am35xx_l4_core__emac = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_emac_hwmod,
.clk = "emac_ick",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_ocp_if omap3xxx_l3_main__gpmc = {
.master = &omap3xxx_l3_main_hwmod,
.slave = &omap3xxx_gpmc_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> SHAM2 (SHA1/MD5) (similar to omap24xx) */
static struct omap_hwmod_class_sysconfig omap3_sham_sysc = {
.rev_offs = 0x5c,
.sysc_offs = 0x60,
.syss_offs = 0x64,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap3_sham_sysc_fields,
};
static struct omap_hwmod_class omap3xxx_sham_class = {
.name = "sham",
.sysc = &omap3_sham_sysc,
};
static struct omap_hwmod omap3xxx_sham_hwmod = {
.name = "sham",
.main_clk = "sha12_ick",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_SHA12_SHIFT,
},
},
.class = &omap3xxx_sham_class,
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_sham_hwmod,
.clk = "sha12_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/*
* 'ssi' class
* synchronous serial interface (multichannel and full-duplex serial if)
*/
static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = {
.name = "ssi",
.sysc = &omap34xx_ssi_sysc,
};
static struct omap_hwmod omap3xxx_ssi_hwmod = {
.name = "ssi",
.class = &omap3xxx_ssi_hwmod_class,
.clkdm_name = "core_l4_clkdm",
.main_clk = "ssi_ssr_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT,
},
},
};
/* L4 CORE -> SSI */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_ssi_hwmod,
.clk = "ssi_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3_main__l4_core,
&omap3xxx_l3_main__l4_per,
&omap3xxx_mpu__l3_main,
&omap3xxx_l3_main__l4_debugss,
&omap3xxx_l4_core__l4_wkup,
&omap3xxx_l4_core__mmc3,
&omap3_l4_core__uart1,
&omap3_l4_core__uart2,
&omap3_l4_per__uart3,
&omap3_l4_core__i2c1,
&omap3_l4_core__i2c2,
&omap3_l4_core__i2c3,
&omap3xxx_l4_wkup__l4_sec,
&omap3xxx_l4_per__timer3,
&omap3xxx_l4_per__timer4,
&omap3xxx_l4_per__timer5,
&omap3xxx_l4_per__timer6,
&omap3xxx_l4_per__timer7,
&omap3xxx_l4_per__timer8,
&omap3xxx_l4_per__timer9,
&omap3xxx_l4_core__timer10,
&omap3xxx_l4_core__timer11,
&omap3xxx_l4_wkup__wd_timer2,
&omap3xxx_l4_wkup__gpio1,
&omap3xxx_l4_per__gpio2,
&omap3xxx_l4_per__gpio3,
&omap3xxx_l4_per__gpio4,
&omap3xxx_l4_per__gpio5,
&omap3xxx_l4_per__gpio6,
&omap3xxx_l4_core__mcbsp1,
&omap3xxx_l4_per__mcbsp2,
&omap3xxx_l4_per__mcbsp3,
&omap3xxx_l4_per__mcbsp4,
&omap3xxx_l4_core__mcbsp5,
&omap3xxx_l4_per__mcbsp2_sidetone,
&omap3xxx_l4_per__mcbsp3_sidetone,
&omap34xx_l4_core__mcspi1,
&omap34xx_l4_core__mcspi2,
&omap34xx_l4_core__mcspi3,
&omap34xx_l4_core__mcspi4,
&omap3xxx_l3_main__gpmc,
NULL,
};
/* crypto hwmod links */
static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__sham,
NULL,
};
static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__sham,
NULL
};
/*
* Apparently the SHA/MD5 and AES accelerator IP blocks are
* only present on some AM35xx chips, and no one knows which
* ones. See
* http://www.spinics.net/lists/arm-kernel/msg215466.html So
* if you need these IP blocks on an AM35xx, try uncommenting
* the following lines.
*/
static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
/* &omap3xxx_l4_core__sham, */
NULL
};
/* 3430ES1-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
&omap3430es1_dss__l3,
&omap3430es1_l4_core__dss,
NULL,
};
/* 3430ES2+-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_dss__l3,
&omap3xxx_l4_core__dss,
&omap3xxx_usbhsotg__l3,
&omap3xxx_l4_core__usbhsotg,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
&omap3xxx_l4_core__usb_tll_hs,
NULL,
};
/* <= 3430ES3-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__pre_es3_mmc1,
&omap3xxx_l4_core__pre_es3_mmc2,
NULL,
};
/* 3430ES3+-only hwmod links */
static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
NULL,
};
/* 34xx-only hwmod links (all ES revisions) */
static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3__iva,
&omap34xx_l4_core__sr1,
&omap34xx_l4_core__sr2,
&omap3xxx_l4_core__mailbox,
&omap3xxx_l4_core__hdq1w,
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap3xxx_l4_core__ssi,
NULL,
};
/* 36xx-only hwmod links (all ES revisions) */
static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3__iva,
&omap36xx_l4_per__uart4,
&omap3xxx_dss__l3,
&omap3xxx_l4_core__dss,
&omap36xx_l4_core__sr1,
&omap36xx_l4_core__sr2,
&omap3xxx_usbhsotg__l3,
&omap3xxx_l4_core__usbhsotg,
&omap3xxx_l4_core__mailbox,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
&omap3xxx_l4_core__usb_tll_hs,
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
&omap3xxx_l4_core__hdq1w,
&omap3xxx_sad2d__l3,
&omap3xxx_l4_core__mmu_isp,
&omap3xxx_l3_main__mmu_iva,
&omap3xxx_l4_core__ssi,
NULL,
};
static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_dss__l3,
&omap3xxx_l4_core__dss,
&am35xx_usbhsotg__l3,
&am35xx_l4_core__usbhsotg,
&am35xx_l4_core__uart4,
&omap3xxx_usb_host_hs__l3_main_2,
&omap3xxx_l4_core__usb_host_hs,
&omap3xxx_l4_core__usb_tll_hs,
&omap3xxx_l4_core__es3plus_mmc1,
&omap3xxx_l4_core__es3plus_mmc2,
&omap3xxx_l4_core__hdq1w,
&am35xx_mdio__l3,
&am35xx_l4_core__mdio,
&am35xx_emac__l3,
&am35xx_l4_core__emac,
NULL,
};
static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_core__dss_dispc,
&omap3xxx_l4_core__dss_dsi1,
&omap3xxx_l4_core__dss_rfbi,
&omap3xxx_l4_core__dss_venc,
NULL,
};
/**
* omap3xxx_hwmod_is_hs_ip_block_usable - is a security IP block accessible?
* @bus: struct device_node * for the top-level OMAP DT data
* @dev_name: device name used in the DT file
*
* Determine whether a "secure" IP block @dev_name is usable by Linux.
* There doesn't appear to be a 100% reliable way to determine this,
* so we rely on heuristics. If @bus is null, meaning there's no DT
* data, then we only assume the IP block is accessible if the OMAP is
* fused as a 'general-purpose' SoC. If however DT data is present,
* test to see if the IP block is described in the DT data and set to
* 'status = "okay"'. If so then we assume the ODM has configured the
* OMAP firewalls to allow access to the IP block.
*
* Return: 0 if device named @dev_name is not likely to be accessible,
* or 1 if it is likely to be accessible.
*/
ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-04 23:02:10 +08:00
static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
const char *dev_name)
{
ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-04 23:02:10 +08:00
struct device_node *node;
bool available;
if (!bus)
ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-04 23:02:10 +08:00
return omap_type() == OMAP2_DEVICE_TYPE_GP;
ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-04 23:02:10 +08:00
node = of_get_child_by_name(bus, dev_name);
available = of_device_is_available(node);
of_node_put(node);
ARM: OMAP2+: Fix device node reference counts After commit 0549bde0fcb1 ("of: fix of_node leak caused in of_find_node_opts_by_path"), the following error may be reported when running omap images. OF: ERROR: Bad of_node_put() on /ocp@68000000 CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1 Hardware name: Generic OMAP3-GP (Flattened Device Tree) [<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14) [<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac) [<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c) [<c05af1b0>] (kobject_release) from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94) [<c0ad1aa4>] (of_find_node_by_name) from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c) [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from [<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274) [<c1215d5c>] (omap3xxx_hwmod_init) from [<c120faa8>] (omap3_init_early+0xa0/0x11c) [<c120faa8>] (omap3_init_early) from [<c120fb2c>] (omap3430_init_early+0x8/0x30) [<c120fb2c>] (omap3430_init_early) from [<c1204710>] (setup_arch+0xc04/0xc34) [<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c) [<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c) of_find_node_by_name() drops the reference to the passed device node. The commit referenced above exposes this problem. To fix the problem, use of_get_child_by_name() instead of of_find_node_by_name(); of_get_child_by_name() does not drop the reference count of passed device nodes. While semantically different, we only look for immediate children of the passed device node, so of_get_child_by_name() is a more appropriate function to use anyway. Release the reference to the device node obtained with of_get_child_by_name() after it is no longer needed to avoid another device node leak. While at it, clean up the code and change the return type of omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use and the return type of of_device_is_available(). Cc: Qi Hou <qi.hou@windriver.com> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-04 23:02:10 +08:00
return available;
}
int __init omap3xxx_hwmod_init(void)
{
int r;
struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
struct device_node *bus;
unsigned int rev;
omap_hwmod_init();
/* Register hwmod links common to all OMAP3 */
r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs);
if (r < 0)
return r;
rev = omap_rev();
/*
* Register hwmod links common to individual OMAP3 families, all
* silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
* All possible revisions should be included in this conditional.
*/
if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
h = omap34xx_hwmod_ocp_ifs;
h_sham = omap34xx_sham_hwmod_ocp_ifs;
} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
h = am35xx_hwmod_ocp_ifs;
h_sham = am35xx_sham_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
h = omap36xx_hwmod_ocp_ifs;
h_sham = omap36xx_sham_hwmod_ocp_ifs;
} else {
WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
return -EINVAL;
}
r = omap_hwmod_register_links(h);
if (r < 0)
return r;
/*
* Register crypto hwmod links only if they are not disabled in DT.
* If DT information is missing, enable them only for GP devices.
*/
bus = of_find_node_by_name(NULL, "ocp");
if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
r = omap_hwmod_register_links(h_sham);
if (r < 0)
goto put_node;
}
of_node_put(bus);
/*
* Register hwmod links specific to certain ES levels of a
* particular family of silicon (e.g., 34xx ES1.0)
*/
h = NULL;
if (rev == OMAP3430_REV_ES1_0) {
h = omap3430es1_hwmod_ocp_ifs;
} else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
h = omap3430es2plus_hwmod_ocp_ifs;
}
if (h) {
r = omap_hwmod_register_links(h);
if (r < 0)
return r;
}
h = NULL;
if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
rev == OMAP3430_REV_ES2_1) {
h = omap3430_pre_es3_hwmod_ocp_ifs;
} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
h = omap3430_es3plus_hwmod_ocp_ifs;
}
if (h)
r = omap_hwmod_register_links(h);
if (r < 0)
return r;
/*
* DSS code presumes that dss_core hwmod is handled first,
* _before_ any other DSS related hwmods so register common
* DSS hwmod links last to ensure that dss_core is already
* registered. Otherwise some change things may happen, for
* ex. if dispc is handled before dss_core and DSS is enabled
* in bootloader DISPC will be reset with outputs enabled
* which sometimes leads to unrecoverable L3 error. XXX The
* long-term fix to this is to ensure hwmods are set up in
* dependency order in the hwmod core code.
*/
r = omap_hwmod_register_links(omap3xxx_dss_hwmod_ocp_ifs);
return r;
put_node:
of_node_put(bus);
return r;
}