OpenCloudOS-Kernel/arch/powerpc/platforms/pseries/iommu.c

1601 lines
42 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
*
* Rewrite, cleanup:
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
* Copyright (C) 2006 Olof Johansson <olof@lixom.net>
*
* Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/memblock.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
#include <linux/of.h>
#include <linux/iommu.h>
#include <linux/rculist.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
#include <asm/udbg.h>
#include <asm/mmzone.h>
#include <asm/plpar_wrappers.h>
#include "pseries.h"
enum {
DDW_QUERY_PE_DMA_WIN = 0,
DDW_CREATE_PE_DMA_WIN = 1,
DDW_REMOVE_PE_DMA_WIN = 2,
DDW_APPLICABLE_SIZE
};
enum {
DDW_EXT_SIZE = 0,
DDW_EXT_RESET_DMA_WIN = 1,
DDW_EXT_QUERY_OUT_SIZE = 2
};
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
static struct iommu_table_group *iommu_pseries_alloc_group(int node)
{
struct iommu_table_group *table_group;
struct iommu_table *tbl;
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
table_group = kzalloc_node(sizeof(struct iommu_table_group), GFP_KERNEL,
node);
if (!table_group)
return NULL;
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, node);
if (!tbl)
goto free_group;
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
INIT_LIST_HEAD_RCU(&tbl->it_group_list);
kref_init(&tbl->it_kref);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
table_group->tables[0] = tbl;
return table_group;
free_group:
kfree(table_group);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
return NULL;
}
static void iommu_pseries_free_group(struct iommu_table_group *table_group,
const char *node_name)
{
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
struct iommu_table *tbl;
if (!table_group)
return;
tbl = table_group->tables[0];
#ifdef CONFIG_IOMMU_API
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
if (table_group->group) {
iommu_group_put(table_group->group);
BUG_ON(table_group->group);
}
#endif
iommu_tce_table_put(tbl);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
kfree(table_group);
}
static int tce_build_pSeries(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
u64 proto_tce;
__be64 *tcep;
u64 rpn;
const unsigned long tceshift = tbl->it_page_shift;
const unsigned long pagesize = IOMMU_PAGE_SIZE(tbl);
proto_tce = TCE_PCI_READ; // Read allowed
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
tcep = ((__be64 *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross MEMBLOCK boundary */
rpn = __pa(uaddr) >> tceshift;
*tcep = cpu_to_be64(proto_tce | rpn << tceshift);
uaddr += pagesize;
tcep++;
}
return 0;
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
__be64 *tcep;
tcep = ((__be64 *)tbl->it_base) + index;
while (npages--)
*(tcep++) = 0;
}
static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
{
__be64 *tcep;
tcep = ((__be64 *)tbl->it_base) + index;
return be64_to_cpu(*tcep);
}
static void tce_free_pSeriesLP(unsigned long liobn, long, long, long);
static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
u64 rc = 0;
u64 proto_tce, tce;
u64 rpn;
int ret = 0;
long tcenum_start = tcenum, npages_start = npages;
rpn = __pa(uaddr) >> tceshift;
proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
while (npages--) {
tce = proto_tce | rpn << tceshift;
rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce);
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_free_pSeriesLP(liobn, tcenum_start, tceshift,
(npages_start - (npages + 1)));
break;
}
if (rc && printk_ratelimit()) {
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)liobn);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
printk("\ttce val = 0x%llx\n", tce );
dump_stack();
}
tcenum++;
rpn++;
}
return ret;
}
static DEFINE_PER_CPU(__be64 *, tce_page);
static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 04:46:00 +08:00
unsigned long attrs)
{
u64 rc = 0;
u64 proto_tce;
__be64 *tcep;
u64 rpn;
long l, limit;
long tcenum_start = tcenum, npages_start = npages;
int ret = 0;
unsigned long flags;
const unsigned long tceshift = tbl->it_page_shift;
if ((npages == 1) || !firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
return tce_build_pSeriesLP(tbl->it_index, tcenum,
tceshift, npages, uaddr,
direction, attrs);
}
local_irq_save(flags); /* to protect tcep and the page behind it */
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
tcep = __this_cpu_read(tce_page);
/* This is safe to do since interrupts are off when we're called
* from iommu_alloc{,_sg}()
*/
if (!tcep) {
tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep) {
local_irq_restore(flags);
return tce_build_pSeriesLP(tbl->it_index, tcenum,
tceshift,
npages, uaddr, direction, attrs);
}
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_write(tce_page, tcep);
}
rpn = __pa(uaddr) >> tceshift;
proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
/* We can map max one pageful of TCEs at a time */
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE);
for (l = 0; l < limit; l++) {
tcep[l] = cpu_to_be64(proto_tce | rpn << tceshift);
rpn++;
}
rc = plpar_tce_put_indirect((u64)tbl->it_index,
(u64)tcenum << tceshift,
(u64)__pa(tcep),
limit);
npages -= limit;
tcenum += limit;
} while (npages > 0 && !rc);
local_irq_restore(flags);
if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
ret = (int)rc;
tce_freemulti_pSeriesLP(tbl, tcenum_start,
(npages_start - (npages + limit)));
return ret;
}
if (rc && printk_ratelimit()) {
printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
printk("\ttce[0] val = 0x%llx\n", tcep[0]);
dump_stack();
}
return ret;
}
static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
long npages)
{
u64 rc;
while (npages--) {
rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, 0);
if (rc && printk_ratelimit()) {
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)liobn);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
dump_stack();
}
tcenum++;
}
}
static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
if (!firmware_has_feature(FW_FEATURE_STUFF_TCE))
return tce_free_pSeriesLP(tbl->it_index, tcenum,
tbl->it_page_shift, npages);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
rc = plpar_tce_stuff((u64)tbl->it_index,
(u64)tcenum << tbl->it_page_shift, 0, npages);
if (rc && printk_ratelimit()) {
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
printk("\trc = %lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
dump_stack();
}
}
static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
{
u64 rc;
unsigned long tce_ret;
rc = plpar_tce_get((u64)tbl->it_index,
(u64)tcenum << tbl->it_page_shift, &tce_ret);
if (rc && printk_ratelimit()) {
printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
dump_stack();
}
return tce_ret;
}
/* this is compatible with cells for the device tree property */
struct dynamic_dma_window_prop {
__be32 liobn; /* tce table number */
__be64 dma_base; /* address hi,lo */
__be32 tce_shift; /* ilog2(tce_page_size) */
__be32 window_shift; /* ilog2(tce_window_size) */
};
struct direct_window {
struct device_node *device;
const struct dynamic_dma_window_prop *prop;
struct list_head list;
};
/* Dynamic DMA Window support */
struct ddw_query_response {
u32 windows_available;
u64 largest_available_block;
u32 page_size;
u32 migration_capable;
};
struct ddw_create_response {
u32 liobn;
u32 addr_hi;
u32 addr_lo;
};
static LIST_HEAD(direct_window_list);
/* prevents races between memory on/offline and window creation */
static DEFINE_SPINLOCK(direct_window_list_lock);
/* protects initializing window twice for same device */
static DEFINE_MUTEX(direct_window_init_mutex);
#define DIRECT64_PROPNAME "linux,direct64-ddr-window-info"
static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
{
const struct dynamic_dma_window_prop *maprange = arg;
int rc;
u64 tce_size, num_tce, dma_offset, next;
u32 tce_shift;
long limit;
tce_shift = be32_to_cpu(maprange->tce_shift);
tce_size = 1ULL << tce_shift;
next = start_pfn << PAGE_SHIFT;
num_tce = num_pfn << PAGE_SHIFT;
/* round back to the beginning of the tce page size */
num_tce += next & (tce_size - 1);
next &= ~(tce_size - 1);
/* covert to number of tces */
num_tce |= tce_size - 1;
num_tce >>= tce_shift;
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, num_tce, 512);
dma_offset = next + be64_to_cpu(maprange->dma_base);
rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn),
dma_offset,
0, limit);
next += limit * tce_size;
num_tce -= limit;
} while (num_tce > 0 && !rc);
return rc;
}
static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
{
const struct dynamic_dma_window_prop *maprange = arg;
u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn;
__be64 *tcep;
u32 tce_shift;
u64 rc = 0;
long l, limit;
if (!firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
unsigned long tceshift = be32_to_cpu(maprange->tce_shift);
unsigned long dmastart = (start_pfn << PAGE_SHIFT) +
be64_to_cpu(maprange->dma_base);
unsigned long tcenum = dmastart >> tceshift;
unsigned long npages = num_pfn << PAGE_SHIFT >> tceshift;
void *uaddr = __va(start_pfn << PAGE_SHIFT);
return tce_build_pSeriesLP(be32_to_cpu(maprange->liobn),
tcenum, tceshift, npages, (unsigned long) uaddr,
DMA_BIDIRECTIONAL, 0);
}
local_irq_disable(); /* to protect tcep and the page behind it */
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
tcep = __this_cpu_read(tce_page);
if (!tcep) {
tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
if (!tcep) {
local_irq_enable();
return -ENOMEM;
}
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
__this_cpu_write(tce_page, tcep);
}
proto_tce = TCE_PCI_READ | TCE_PCI_WRITE;
liobn = (u64)be32_to_cpu(maprange->liobn);
tce_shift = be32_to_cpu(maprange->tce_shift);
tce_size = 1ULL << tce_shift;
next = start_pfn << PAGE_SHIFT;
num_tce = num_pfn << PAGE_SHIFT;
/* round back to the beginning of the tce page size */
num_tce += next & (tce_size - 1);
next &= ~(tce_size - 1);
/* covert to number of tces */
num_tce |= tce_size - 1;
num_tce >>= tce_shift;
/* We can map max one pageful of TCEs at a time */
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, num_tce, 4096/TCE_ENTRY_SIZE);
dma_offset = next + be64_to_cpu(maprange->dma_base);
for (l = 0; l < limit; l++) {
tcep[l] = cpu_to_be64(proto_tce | next);
next += tce_size;
}
rc = plpar_tce_put_indirect(liobn,
dma_offset,
(u64)__pa(tcep),
limit);
num_tce -= limit;
} while (num_tce > 0 && !rc);
/* error cleanup: caller will clear whole range */
local_irq_enable();
return rc;
}
static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn,
unsigned long num_pfn, void *arg)
{
return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg);
}
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl)
{
struct device_node *node;
const unsigned long *basep;
[POWERPC] linux,tce-size property is 32 bits The "linux,tce-size" property is only 32 bits (see prom_initialize_tce_table() in arch/powerpc/kernel/prom_init.c). Treating it as an unsigned long in iommu_table_setparms() leads to access beyond the end of the property's buffer, so we pass garbage to the memset() in that function. [boot]0020 XICS Init i8259 legacy interrupt controller initialized [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 32768 bytes) cpu 0x0: Vector: 300 (Data Access) at [c0000000fe783850] pc: c000000000035e90: .memset+0x60/0xfc lr: c000000000044fa4: .iommu_table_setparms+0xb0/0x158 sp: c0000000fe783ad0 msr: 9000000000009032 dar: c000000100000000 dsisr: 42010000 current = 0xc00000000450e810 paca = 0xc000000000411580 pid = 1, comm = swapper enter ? for help [link register ] c000000000044fa4 .iommu_table_setparms+0xb0/0x158 [c0000000fe783ad0] c000000000044f4c .iommu_table_setparms+0x58/0x158 (unreliable) [c0000000fe783b70] c00000000004529c .iommu_bus_setup_pSeries+0x1c4/0x254 [c0000000fe783c00] c00000000002b8ac .do_bus_setup+0x3c/0xe4 [c0000000fe783c80] c00000000002c924 .pcibios_fixup_bus+0x64/0xd8 [c0000000fe783d00] c0000000001a2d5c .pci_scan_child_bus+0x6c/0x10c [c0000000fe783da0] c00000000002be28 .scan_phb+0x17c/0x1b4 [c0000000fe783e40] c0000000003cfa00 .pcibios_init+0x58/0x19c [c0000000fe783ec0] c0000000000094b4 .init+0x1e8/0x3d8 [c0000000fe783f90] c000000000026e54 .kernel_thread+0x4c/0x68 Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 11:28:00 +08:00
const u32 *sizep;
node = phb->dn;
basep = of_get_property(node, "linux,tce-base", NULL);
sizep = of_get_property(node, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL) {
printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %pOF has "
"missing tce entries !\n", dn);
return;
}
tbl->it_base = (unsigned long)__va(*basep);
if (!is_kdump_kernel())
memset((void *)tbl->it_base, 0, *sizep);
tbl->it_busno = phb->bus->number;
tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
/* Units of tce entries */
tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift;
/* Test if we are going over 2GB of DMA space */
if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) {
udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
}
phb->dma_window_base_cur += phb->dma_window_size;
/* Set the tce table size - measured in entries */
tbl->it_size = phb->dma_window_size >> tbl->it_page_shift;
tbl->it_index = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
}
/*
* iommu_table_setparms_lpar
*
* Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
*/
static void iommu_table_setparms_lpar(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl,
struct iommu_table_group *table_group,
const __be32 *dma_window)
{
unsigned long offset, size;
of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
tbl->it_busno = phb->bus->number;
tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
tbl->it_base = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
tbl->it_offset = offset >> tbl->it_page_shift;
tbl->it_size = size >> tbl->it_page_shift;
table_group->tce32_start = offset;
table_group->tce32_size = size;
}
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
struct iommu_table_ops iommu_table_pseries_ops = {
.set = tce_build_pSeries,
.clear = tce_free_pSeries,
.get = tce_get_pseries
};
static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
{
struct device_node *dn;
struct iommu_table *tbl;
struct device_node *isa_dn, *isa_dn_orig;
struct device_node *tmp;
struct pci_dn *pci;
int children;
dn = pci_bus_to_OF_node(bus);
pr_debug("pci_dma_bus_setup_pSeries: setting up bus %pOF\n", dn);
if (bus->self) {
/* This is not a root bus, any setup will be done for the
* device-side of the bridge in iommu_dev_setup_pSeries().
*/
return;
}
pci = PCI_DN(dn);
/* Check if the ISA bus on the system is under
* this PHB.
*/
isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa");
while (isa_dn && isa_dn != dn)
isa_dn = isa_dn->parent;
of_node_put(isa_dn_orig);
/* Count number of direct PCI children of the PHB. */
for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling)
children++;
pr_debug("Children: %d\n", children);
/* Calculate amount of DMA window per slot. Each window must be
* a power of two (due to pci_alloc_consistent requirements).
*
* Keep 256MB aside for PHBs with ISA.
*/
if (!isa_dn) {
/* No ISA/IDE - just set window size and return */
pci->phb->dma_window_size = 0x80000000ul; /* To be divided */
while (pci->phb->dma_window_size * children > 0x80000000ul)
pci->phb->dma_window_size >>= 1;
pr_debug("No ISA/IDE, window size is 0x%llx\n",
pci->phb->dma_window_size);
pci->phb->dma_window_base_cur = 0;
return;
}
/* If we have ISA, then we probably have an IDE
* controller too. Allocate a 128MB table but
* skip the first 128MB to avoid stepping on ISA
* space.
*/
pci->phb->dma_window_size = 0x8000000ul;
pci->phb->dma_window_base_cur = 0x8000000ul;
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
pci->table_group = iommu_pseries_alloc_group(pci->phb->node);
tbl = pci->table_group->tables[0];
iommu_table_setparms(pci->phb, dn, tbl);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_pseries_ops;
if (!iommu_init_table(tbl, pci->phb->node, 0, 0))
panic("Failed to initialize iommu table");
/* Divide the rest (1.75GB) among the children */
pci->phb->dma_window_size = 0x80000000ul;
while (pci->phb->dma_window_size * children > 0x70000000ul)
pci->phb->dma_window_size >>= 1;
pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size);
}
#ifdef CONFIG_IOMMU_API
static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned
long *tce, enum dma_data_direction *direction,
bool realmode)
{
long rc;
unsigned long ioba = (unsigned long) index << tbl->it_page_shift;
unsigned long flags, oldtce = 0;
u64 proto_tce = iommu_direction_to_tce_perm(*direction);
unsigned long newtce = *tce | proto_tce;
spin_lock_irqsave(&tbl->large_pool.lock, flags);
rc = plpar_tce_get((u64)tbl->it_index, ioba, &oldtce);
if (!rc)
rc = plpar_tce_put((u64)tbl->it_index, ioba, newtce);
if (!rc) {
*direction = iommu_tce_direction(oldtce);
*tce = oldtce & ~(TCE_PCI_READ | TCE_PCI_WRITE);
}
spin_unlock_irqrestore(&tbl->large_pool.lock, flags);
return rc;
}
#endif
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
struct iommu_table_ops iommu_table_lpar_multi_ops = {
.set = tce_buildmulti_pSeriesLP,
#ifdef CONFIG_IOMMU_API
.xchg_no_kill = tce_exchange_pseries,
#endif
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
.clear = tce_freemulti_pSeriesLP,
.get = tce_get_pSeriesLP
};
static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
{
struct iommu_table *tbl;
struct device_node *dn, *pdn;
struct pci_dn *ppci;
const __be32 *dma_window = NULL;
dn = pci_bus_to_OF_node(bus);
pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %pOF\n",
dn);
/* Find nearest ibm,dma-window, walking up the device tree */
for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window != NULL)
break;
}
if (dma_window == NULL) {
pr_debug(" no ibm,dma-window property !\n");
return;
}
ppci = PCI_DN(pdn);
pr_debug(" parent is %pOF, iommu_table: 0x%p\n",
pdn, ppci->table_group);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
if (!ppci->table_group) {
ppci->table_group = iommu_pseries_alloc_group(ppci->phb->node);
tbl = ppci->table_group->tables[0];
iommu_table_setparms_lpar(ppci->phb, pdn, tbl,
ppci->table_group, dma_window);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_lpar_multi_ops;
if (!iommu_init_table(tbl, ppci->phb->node, 0, 0))
panic("Failed to initialize iommu table");
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
iommu_register_group(ppci->table_group,
pci_domain_nr(bus), 0);
pr_debug(" created table: %p\n", ppci->table_group);
}
}
static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
{
struct device_node *dn;
struct iommu_table *tbl;
pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev));
dn = dev->dev.of_node;
/* If we're the direct child of a root bus, then we need to allocate
* an iommu table ourselves. The bus setup code should have setup
* the window sizes already.
*/
if (!dev->bus->self) {
struct pci_controller *phb = PCI_DN(dn)->phb;
pr_debug(" --> first child, no bridge. Allocating iommu table.\n");
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
PCI_DN(dn)->table_group = iommu_pseries_alloc_group(phb->node);
tbl = PCI_DN(dn)->table_group->tables[0];
iommu_table_setparms(phb, dn, tbl);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_pseries_ops;
if (!iommu_init_table(tbl, phb->node, 0, 0))
panic("Failed to initialize iommu table");
set_iommu_table_base(&dev->dev, tbl);
return;
}
/* If this device is further down the bus tree, search upwards until
* an already allocated iommu table is found and use that.
*/
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
while (dn && PCI_DN(dn) && PCI_DN(dn)->table_group == NULL)
dn = dn->parent;
if (dn && PCI_DN(dn))
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
set_iommu_table_base(&dev->dev,
PCI_DN(dn)->table_group->tables[0]);
else
printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
pci_name(dev));
}
static int __read_mostly disable_ddw;
static int __init disable_ddw_setup(char *str)
{
disable_ddw = 1;
printk(KERN_INFO "ppc iommu: disabling ddw.\n");
return 0;
}
early_param("disable_ddw", disable_ddw_setup);
static void remove_dma_window(struct device_node *np, u32 *ddw_avail,
struct property *win)
{
struct dynamic_dma_window_prop *dwp;
u64 liobn;
int ret;
dwp = win->value;
liobn = (u64)be32_to_cpu(dwp->liobn);
/* clear the whole window, note the arg is in kernel pages */
ret = tce_clearrange_multi_pSeriesLP(0,
1ULL << (be32_to_cpu(dwp->window_shift) - PAGE_SHIFT), dwp);
if (ret)
pr_warn("%pOF failed to clear tces in window.\n",
np);
else
pr_debug("%pOF successfully cleared tces in window.\n",
np);
ret = rtas_call(ddw_avail[DDW_REMOVE_PE_DMA_WIN], 1, 1, NULL, liobn);
if (ret)
pr_warn("%pOF: failed to remove direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
else
pr_debug("%pOF: successfully removed direct window: rtas returned "
"%d to ibm,remove-pe-dma-window(%x) %llx\n",
np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn);
}
static void remove_ddw(struct device_node *np, bool remove_prop)
{
struct property *win;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
int ret = 0;
ret = of_property_read_u32_array(np, "ibm,ddw-applicable",
&ddw_avail[0], DDW_APPLICABLE_SIZE);
if (ret)
return;
win = of_find_property(np, DIRECT64_PROPNAME, NULL);
if (!win)
return;
if (win->length >= sizeof(struct dynamic_dma_window_prop))
remove_dma_window(np, ddw_avail, win);
if (!remove_prop)
return;
ret = of_remove_property(np, win);
if (ret)
pr_warn("%pOF: failed to remove direct window property: %d\n",
np, ret);
}
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
static u64 find_existing_ddw(struct device_node *pdn, int *window_shift)
{
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
u64 dma_addr = 0;
spin_lock(&direct_window_list_lock);
/* check if we already created a window and dupe that config if so */
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == pdn) {
direct64 = window->prop;
dma_addr = be64_to_cpu(direct64->dma_base);
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
*window_shift = be32_to_cpu(direct64->window_shift);
break;
}
}
spin_unlock(&direct_window_list_lock);
return dma_addr;
}
static int find_existing_ddw_windows(void)
{
int len;
struct device_node *pdn;
struct direct_window *window;
const struct dynamic_dma_window_prop *direct64;
if (!firmware_has_feature(FW_FEATURE_LPAR))
return 0;
for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
if (!direct64)
continue;
window = kzalloc(sizeof(*window), GFP_KERNEL);
if (!window || len < sizeof(struct dynamic_dma_window_prop)) {
kfree(window);
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
remove_ddw(pdn, true);
continue;
}
window->device = pdn;
window->prop = direct64;
spin_lock(&direct_window_list_lock);
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
}
return 0;
}
machine_arch_initcall(pseries, find_existing_ddw_windows);
/**
* ddw_read_ext - Get the value of an DDW extension
* @np: device node from which the extension value is to be read.
* @extnum: index number of the extension.
* @value: pointer to return value, modified when extension is available.
*
* Checks if "ibm,ddw-extensions" exists for this node, and get the value
* on index 'extnum'.
* It can be used only to check if a property exists, passing value == NULL.
*
* Returns:
* 0 if extension successfully read
* -EINVAL if the "ibm,ddw-extensions" does not exist,
* -ENODATA if "ibm,ddw-extensions" does not have a value, and
* -EOVERFLOW if "ibm,ddw-extensions" does not contain this extension.
*/
static inline int ddw_read_ext(const struct device_node *np, int extnum,
u32 *value)
{
static const char propname[] = "ibm,ddw-extensions";
u32 count;
int ret;
ret = of_property_read_u32_index(np, propname, DDW_EXT_SIZE, &count);
if (ret)
return ret;
if (count < extnum)
return -EOVERFLOW;
if (!value)
value = &count;
return of_property_read_u32_index(np, propname, extnum, value);
}
static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_query_response *query,
struct device_node *parent)
{
struct device_node *dn;
struct pci_dn *pdn;
u32 cfg_addr, ext_query, query_out[5];
u64 buid;
int ret, out_sz;
/*
* From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many
* output parameters ibm,query-pe-dma-windows will have, ranging from
* 5 to 6.
*/
ret = ddw_read_ext(parent, DDW_EXT_QUERY_OUT_SIZE, &ext_query);
if (!ret && ext_query == 1)
out_sz = 6;
else
out_sz = 5;
/*
* Get the config address and phb buid of the PE window.
* Rely on eeh to retrieve this for us.
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
dn = pci_device_to_OF_node(dev);
pdn = PCI_DN(dn);
buid = pdn->phb->buid;
cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, out_sz, query_out,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d\n",
ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
BUID_LO(buid), ret);
switch (out_sz) {
case 5:
query->windows_available = query_out[0];
query->largest_available_block = query_out[1];
query->page_size = query_out[2];
query->migration_capable = query_out[3];
break;
case 6:
query->windows_available = query_out[0];
query->largest_available_block = ((u64)query_out[1] << 32) |
query_out[2];
query->page_size = query_out[3];
query->migration_capable = query_out[4];
break;
}
return ret;
}
static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
struct ddw_create_response *create, int page_shift,
int window_shift)
{
struct device_node *dn;
struct pci_dn *pdn;
u32 cfg_addr;
u64 buid;
int ret;
/*
* Get the config address and phb buid of the PE window.
* Rely on eeh to retrieve this for us.
* Retrieve them from the pci device, not the node with the
* dma-window property
*/
dn = pci_device_to_OF_node(dev);
pdn = PCI_DN(dn);
buid = pdn->phb->buid;
cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
ret = rtas_call(ddw_avail[DDW_CREATE_PE_DMA_WIN], 5, 4,
(u32 *)create, cfg_addr, BUID_HI(buid),
BUID_LO(buid), page_shift, window_shift);
} while (rtas_busy_delay(ret));
dev_info(&dev->dev,
"ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d "
"(liobn = 0x%x starting addr = %x %x)\n",
ddw_avail[DDW_CREATE_PE_DMA_WIN], cfg_addr, BUID_HI(buid),
BUID_LO(buid), page_shift, window_shift, ret, create->liobn,
create->addr_hi, create->addr_lo);
return ret;
}
struct failed_ddw_pdn {
struct device_node *pdn;
struct list_head list;
};
static LIST_HEAD(failed_ddw_pdn_list);
static phys_addr_t ddw_memory_hotplug_max(void)
{
phys_addr_t max_addr = memory_hotplug_max();
struct device_node *memory;
/*
* The "ibm,pmemory" can appear anywhere in the address space.
* Assuming it is still backed by page structs, set the upper limit
* for the huge DMA window as MAX_PHYSMEM_BITS.
*/
if (of_find_node_by_type(NULL, "ibm,pmemory"))
return (sizeof(phys_addr_t) * 8 <= MAX_PHYSMEM_BITS) ?
(phys_addr_t) -1 : (1ULL << MAX_PHYSMEM_BITS);
for_each_node_by_type(memory, "memory") {
unsigned long start, size;
int n_mem_addr_cells, n_mem_size_cells, len;
const __be32 *memcell_buf;
memcell_buf = of_get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
n_mem_addr_cells = of_n_addr_cells(memory);
n_mem_size_cells = of_n_size_cells(memory);
start = of_read_number(memcell_buf, n_mem_addr_cells);
memcell_buf += n_mem_addr_cells;
size = of_read_number(memcell_buf, n_mem_size_cells);
memcell_buf += n_mem_size_cells;
max_addr = max_t(phys_addr_t, max_addr, start + size);
}
return max_addr;
}
/*
* Platforms supporting the DDW option starting with LoPAR level 2.7 implement
* ibm,ddw-extensions, which carries the rtas token for
* ibm,reset-pe-dma-windows.
* That rtas-call can be used to restore the default DMA window for the device.
*/
static void reset_dma_window(struct pci_dev *dev, struct device_node *par_dn)
{
int ret;
u32 cfg_addr, reset_dma_win;
u64 buid;
struct device_node *dn;
struct pci_dn *pdn;
ret = ddw_read_ext(par_dn, DDW_EXT_RESET_DMA_WIN, &reset_dma_win);
if (ret)
return;
dn = pci_device_to_OF_node(dev);
pdn = PCI_DN(dn);
buid = pdn->phb->buid;
cfg_addr = (pdn->busno << 16) | (pdn->devfn << 8);
ret = rtas_call(reset_dma_win, 3, 1, NULL, cfg_addr, BUID_HI(buid),
BUID_LO(buid));
if (ret)
dev_info(&dev->dev,
"ibm,reset-pe-dma-windows(%x) %x %x %x returned %d ",
reset_dma_win, cfg_addr, BUID_HI(buid), BUID_LO(buid),
ret);
}
/* Return largest page shift based on "IO Page Sizes" output of ibm,query-pe-dma-window. */
static int iommu_get_page_shift(u32 query_page_size)
{
/* Supported IO page-sizes according to LoPAR */
const int shift[] = {
__builtin_ctzll(SZ_4K), __builtin_ctzll(SZ_64K), __builtin_ctzll(SZ_16M),
__builtin_ctzll(SZ_32M), __builtin_ctzll(SZ_64M), __builtin_ctzll(SZ_128M),
__builtin_ctzll(SZ_256M), __builtin_ctzll(SZ_16G)
};
int i = ARRAY_SIZE(shift) - 1;
/*
* On LoPAR, ibm,query-pe-dma-window outputs "IO Page Sizes" using a bit field:
* - bit 31 means 4k pages are supported,
* - bit 30 means 64k pages are supported, and so on.
* Larger pagesizes map more memory with the same amount of TCEs, so start probing them.
*/
for (; i >= 0 ; i--) {
if (query_page_size & (1 << i))
return shift[i];
}
/* No valid page size found. */
return 0;
}
/*
* If the PE supports dynamic dma windows, and there is space for a table
* that can map all pages in a linear offset, then setup such a table,
* and record the dma-offset in the struct device.
*
* dev: the pci device we are checking
* pdn: the parent pe node with the ibm,dma_window property
* Future: also check if we can remap the base window for our base page size
*
* returns the dma offset for use by the direct mapped DMA code.
*/
static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
{
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
int len = 0, ret;
int max_ram_len = order_base_2(ddw_memory_hotplug_max());
struct ddw_query_response query;
struct ddw_create_response create;
int page_shift;
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
u64 dma_addr;
struct device_node *dn;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
struct direct_window *window;
struct property *win64;
struct dynamic_dma_window_prop *ddwprop;
struct failed_ddw_pdn *fpdn;
bool default_win_removed = false;
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
bool pmem_present;
dn = of_find_node_by_type(NULL, "ibm,pmemory");
pmem_present = dn != NULL;
of_node_put(dn);
mutex_lock(&direct_window_init_mutex);
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
dma_addr = find_existing_ddw(pdn, &len);
if (dma_addr != 0)
goto out_unlock;
/*
* If we already went through this for a previous function of
* the same device and failed, we don't want to muck with the
* DMA window again, as it will race with in-flight operations
* and can lead to EEHs. The above mutex protects access to the
* list.
*/
list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) {
if (fpdn->pdn == pdn)
goto out_unlock;
}
/*
* the ibm,ddw-applicable property holds the tokens for:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* for the given node in that order.
* the property is actually in the parent, not the PE
*/
ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable",
&ddw_avail[0], DDW_APPLICABLE_SIZE);
if (ret)
goto out_failed;
/*
* Query if there is a second window of size to map the
* whole partition. Query returns number of windows, largest
* block assigned to PE (partition endpoint), and two bitmasks
* of page sizes: supported and supported for migrate-dma.
*/
dn = pci_device_to_OF_node(dev);
ret = query_ddw(dev, ddw_avail, &query, pdn);
if (ret != 0)
goto out_failed;
/*
* If there is no window available, remove the default DMA window,
* if it's present. This will make all the resources available to the
* new DDW window.
* If anything fails after this, we need to restore it, so also check
* for extensions presence.
*/
if (query.windows_available == 0) {
struct property *default_win;
int reset_win_ext;
default_win = of_find_property(pdn, "ibm,dma-window", NULL);
if (!default_win)
goto out_failed;
reset_win_ext = ddw_read_ext(pdn, DDW_EXT_RESET_DMA_WIN, NULL);
if (reset_win_ext)
goto out_failed;
remove_dma_window(pdn, ddw_avail, default_win);
default_win_removed = true;
/* Query again, to check if the window is available */
ret = query_ddw(dev, ddw_avail, &query, pdn);
if (ret != 0)
goto out_failed;
if (query.windows_available == 0) {
/* no windows are available for this device. */
dev_dbg(&dev->dev, "no free dynamic windows");
goto out_failed;
}
}
page_shift = iommu_get_page_shift(query.page_size);
if (!page_shift) {
dev_dbg(&dev->dev, "no supported direct page size in mask %x",
query.page_size);
goto out_failed;
}
/* verify the window * number of ptes will map the partition */
/* check largest block * page size > max memory hotplug addr */
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
/*
* The "ibm,pmemory" can appear anywhere in the address space.
* Assuming it is still backed by page structs, try MAX_PHYSMEM_BITS
* for the upper limit and fallback to max RAM otherwise but this
* disables device::dma_ops_bypass.
*/
len = max_ram_len;
if (pmem_present) {
if (query.largest_available_block >=
(1ULL << (MAX_PHYSMEM_BITS - page_shift)))
len = MAX_PHYSMEM_BITS;
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
else
dev_info(&dev->dev, "Skipping ibm,pmemory");
}
if (query.largest_available_block < (1ULL << (len - page_shift))) {
dev_dbg(&dev->dev,
"can't map partition max 0x%llx with %llu %llu-sized pages\n",
1ULL << len,
query.largest_available_block,
1ULL << page_shift);
goto out_failed;
}
win64 = kzalloc(sizeof(struct property), GFP_KERNEL);
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property for 64bit dma window\n");
goto out_failed;
}
win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL);
win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL);
win64->length = sizeof(*ddwprop);
if (!win64->name || !win64->value) {
dev_info(&dev->dev,
"couldn't allocate property name and value\n");
goto out_free_prop;
}
ret = create_ddw(dev, ddw_avail, &create, page_shift, len);
if (ret != 0)
goto out_free_prop;
ddwprop->liobn = cpu_to_be32(create.liobn);
ddwprop->dma_base = cpu_to_be64(((u64)create.addr_hi << 32) |
create.addr_lo);
ddwprop->tce_shift = cpu_to_be32(page_shift);
ddwprop->window_shift = cpu_to_be32(len);
dev_dbg(&dev->dev, "created tce table LIOBN 0x%x for %pOF\n",
create.liobn, dn);
window = kzalloc(sizeof(*window), GFP_KERNEL);
if (!window)
goto out_clear_window;
ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT,
win64->value, tce_setrange_multi_pSeriesLP_walk);
if (ret) {
dev_info(&dev->dev, "failed to map direct window for %pOF: %d\n",
dn, ret);
goto out_free_window;
}
ret = of_add_property(pdn, win64);
if (ret) {
dev_err(&dev->dev, "unable to add dma window property for %pOF: %d",
pdn, ret);
goto out_free_window;
}
window->device = pdn;
window->prop = ddwprop;
spin_lock(&direct_window_list_lock);
list_add(&window->list, &direct_window_list);
spin_unlock(&direct_window_list_lock);
dma_addr = be64_to_cpu(ddwprop->dma_base);
goto out_unlock;
out_free_window:
kfree(window);
out_clear_window:
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
remove_ddw(pdn, true);
out_free_prop:
kfree(win64->name);
kfree(win64->value);
kfree(win64);
out_failed:
if (default_win_removed)
reset_dma_window(dev, pdn);
fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL);
if (!fpdn)
goto out_unlock;
fpdn->pdn = pdn;
list_add(&fpdn->list, &failed_ddw_pdn_list);
out_unlock:
mutex_unlock(&direct_window_init_mutex);
powerpc/dma: Fallback to dma_ops when persistent memory present So far we have been using huge DMA windows to map all the RAM available. The RAM is normally mapped to the VM address space contiguously, and there is always a reasonable upper limit for possible future hot plugged RAM which makes it easy to map all RAM via IOMMU. Now there is persistent memory ("ibm,pmemory" in the FDT) which (unlike normal RAM) can map anywhere in the VM space beyond the maximum RAM size and since it can be used for DMA, it requires extending the huge window up to MAX_PHYSMEM_BITS which requires hypervisor support for: 1. huge TCE tables; 2. multilevel TCE tables; 3. huge IOMMU pages. Certain hypervisors cannot do either so the only option left is restricting the huge DMA window to include only RAM and fallback to the default DMA window for persistent memory. This defines arch_dma_map_direct/etc to allow generic DMA code perform additional checks on whether direct DMA is still possible. This checks if the system has persistent memory. If it does not, the DMA bypass mode is selected, i.e. * dev->bus_dma_limit = 0 * dev->dma_ops_bypass = true <- this avoid calling dma_ops for mapping. If there is such memory, this creates identity mapping only for RAM and sets the dev->bus_dma_limit to let the generic code decide whether to call into the direct DMA or the indirect DMA ops. This should not change the existing behaviour when no persistent memory as dev->dma_ops_bypass is expected to be set. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29 09:52:41 +08:00
/*
* If we have persistent memory and the window size is only as big
* as RAM, then we failed to create a window to cover persistent
* memory and need to set the DMA limit.
*/
if (pmem_present && dma_addr && (len == max_ram_len))
dev->dev.bus_dma_limit = dma_addr + (1ULL << len);
return dma_addr;
}
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
{
struct device_node *pdn, *dn;
struct iommu_table *tbl;
const __be32 *dma_window = NULL;
struct pci_dn *pci;
pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
/* dev setup for LPAR is a little tricky, since the device tree might
* contain the dma-window properties per-device and not necessarily
* for the bus. So we need to search upwards in the tree until we
* either hit a dma-window property, OR find a parent with a table
* already allocated.
*/
dn = pci_device_to_OF_node(dev);
pr_debug(" node is %pOF\n", dn);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window)
break;
}
if (!pdn || !PCI_DN(pdn)) {
printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
"no DMA window found for pci dev=%s dn=%pOF\n",
pci_name(dev), dn);
return;
}
pr_debug(" parent is %pOF\n", pdn);
pci = PCI_DN(pdn);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
if (!pci->table_group) {
pci->table_group = iommu_pseries_alloc_group(pci->phb->node);
tbl = pci->table_group->tables[0];
iommu_table_setparms_lpar(pci->phb, pdn, tbl,
pci->table_group, dma_window);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops = &iommu_table_lpar_multi_ops;
powerpc/powernv/ioda2: Create bigger default window with 64k IOMMU pages At the moment we create a small window only for 32bit devices, the window maps 0..2GB of the PCI space only. For other devices we either use a sketchy bypass or hardware bypass but the former can only work if the amount of RAM is no bigger than the device's DMA mask and the latter requires devices to support at least 59bit DMA. This extends the default DMA window to the maximum size possible to allow a wider DMA mask than just 32bit. The default window size is now limited by the the iommu_table::it_map allocation bitmap which is a contiguous array, 1 bit per an IOMMU page. This increases the default IOMMU page size from hard coded 4K to the system page size to allow wider DMA masks. This increases the level number to not exceed the max order allocation limit per TCE level. By the same time, this keeps minimal levels number as 2 in order to save memory. As the extended window now overlaps the 32bit MMIO region, this adds an area reservation to iommu_init_table(). After this change the default window size is 0x80000000000==1<<43 so devices limited to DMA mask smaller than the amount of system RAM can still use more than just 2GB of memory for DMA. This is an optimization and not a bug fix for DMA API usage. With the on-demand allocation of indirect TCE table levels enabled and 2 levels, the first TCE level size is just 1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190718051139.74787-5-aik@ozlabs.ru
2019-07-18 13:11:39 +08:00
iommu_init_table(tbl, pci->phb->node, 0, 0);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
iommu_register_group(pci->table_group,
pci_domain_nr(pci->phb->bus), 0);
pr_debug(" created table: %p\n", pci->table_group);
} else {
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
pr_debug(" found DMA window, table: %p\n", pci->table_group);
}
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
set_iommu_table_base(&dev->dev, pci->table_group->tables[0]);
powerpc/powernv/pseries: Rework device adding to IOMMU groups The powernv platform registers IOMMU groups and adds devices to them from the pci_controller_ops::setup_bridge() hook except one case when virtual functions (SRIOV VFs) are added from a bus notifier. The pseries platform registers IOMMU groups from the pci_controller_ops::dma_bus_setup() hook and adds devices from the pci_controller_ops::dma_dev_setup() hook. The very same bus notifier used for powernv does not add devices for pseries though as __of_scan_bus() adds devices first, then it does the bus/dev DMA setup. Both platforms use iommu_add_device() which takes a device and expects it to have a valid IOMMU table struct with an iommu_table_group pointer which in turn points the iommu_group struct (which represents an IOMMU group). Although the helper seems easy to use, it relies on some pre-existing device configuration and associated data structures which it does not really need. This simplifies iommu_add_device() to take the table_group pointer directly. Pseries already has a table_group pointer handy and the bus notified is not used anyway. For powernv, this copies the existing bus notifier, makes it work for powernv only which means an easy way of getting to the table_group pointer. This was tested on VFs but should also support physical PCI hotplug. Since iommu_add_device() receives the table_group pointer directly, pseries does not do TCE cache invalidation (the hypervisor does) nor allow multiple groups per a VFIO container (in other words sharing an IOMMU table between partitionable endpoints), this removes iommu_table_group_link from pseries. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-19 16:52:21 +08:00
iommu_add_device(pci->table_group, &dev->dev);
}
static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask)
{
struct device_node *dn = pci_device_to_OF_node(pdev), *pdn;
const __be32 *dma_window = NULL;
/* only attempt to use a new window if 64-bit DMA is requested */
if (dma_mask < DMA_BIT_MASK(64))
return false;
dev_dbg(&pdev->dev, "node is %pOF\n", dn);
/*
* the device tree might contain the dma-window properties
* per-device and not necessarily for the bus. So we need to
* search upwards in the tree until we either hit a dma-window
* property, OR find a parent with a table already allocated.
*/
for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->table_group;
pdn = pdn->parent) {
dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
if (dma_window)
break;
}
if (pdn && PCI_DN(pdn)) {
pdev->dev.archdata.dma_offset = enable_ddw(pdev, pdn);
if (pdev->dev.archdata.dma_offset)
return true;
}
return false;
}
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
struct direct_window *window;
struct memory_notify *arg = data;
int ret = 0;
switch (action) {
case MEM_GOING_ONLINE:
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
spin_unlock(&direct_window_list_lock);
break;
case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn,
arg->nr_pages, window->prop);
/* XXX log error */
}
spin_unlock(&direct_window_list_lock);
break;
default:
break;
}
if (ret && action != MEM_CANCEL_ONLINE)
return NOTIFY_BAD;
return NOTIFY_OK;
}
static struct notifier_block iommu_mem_nb = {
.notifier_call = iommu_mem_notifier,
};
static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
{
int err = NOTIFY_OK;
struct of_reconfig_data *rd = data;
struct device_node *np = rd->dn;
struct pci_dn *pci = PCI_DN(np);
struct direct_window *window;
switch (action) {
case OF_RECONFIG_DETACH_NODE:
powerpc/pseries: Avoid deadlock on removing ddw Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-11 17:16:20 +08:00
/*
* Removing the property will invoke the reconfig
* notifier again, which causes dead-lock on the
* read-write semaphore of the notifier chain. So
* we have to remove the property when releasing
* the device node.
*/
remove_ddw(np, false);
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
if (pci && pci->table_group)
iommu_pseries_free_group(pci->table_group,
np->full_name);
spin_lock(&direct_window_list_lock);
list_for_each_entry(window, &direct_window_list, list) {
if (window->device == np) {
list_del(&window->list);
kfree(window);
break;
}
}
spin_unlock(&direct_window_list_lock);
break;
default:
err = NOTIFY_DONE;
break;
}
return err;
}
static struct notifier_block iommu_reconfig_nb = {
.notifier_call = iommu_reconfig_notifier,
};
/* These are called very early. */
void iommu_init_early_pSeries(void)
{
if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL))
return;
if (firmware_has_feature(FW_FEATURE_LPAR)) {
pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
if (!disable_ddw)
pseries_pci_controller_ops.iommu_bypass_supported =
iommu_bypass_supported_pSeriesLP;
} else {
pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries;
pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries;
}
of_reconfig_notifier_register(&iommu_reconfig_nb);
register_memory_notifier(&iommu_mem_nb);
set_pci_dma_ops(&dma_iommu_ops);
}
static int __init disable_multitce(char *str)
{
if (strcmp(str, "off") == 0 &&
firmware_has_feature(FW_FEATURE_LPAR) &&
(firmware_has_feature(FW_FEATURE_PUT_TCE_IND) ||
firmware_has_feature(FW_FEATURE_STUFF_TCE))) {
printk(KERN_INFO "Disabling MULTITCE firmware feature\n");
powerpc_firmware_features &=
~(FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE);
}
return 1;
}
__setup("multitce=", disable_multitce);
powerpc/powernv/pseries: Rework device adding to IOMMU groups The powernv platform registers IOMMU groups and adds devices to them from the pci_controller_ops::setup_bridge() hook except one case when virtual functions (SRIOV VFs) are added from a bus notifier. The pseries platform registers IOMMU groups from the pci_controller_ops::dma_bus_setup() hook and adds devices from the pci_controller_ops::dma_dev_setup() hook. The very same bus notifier used for powernv does not add devices for pseries though as __of_scan_bus() adds devices first, then it does the bus/dev DMA setup. Both platforms use iommu_add_device() which takes a device and expects it to have a valid IOMMU table struct with an iommu_table_group pointer which in turn points the iommu_group struct (which represents an IOMMU group). Although the helper seems easy to use, it relies on some pre-existing device configuration and associated data structures which it does not really need. This simplifies iommu_add_device() to take the table_group pointer directly. Pseries already has a table_group pointer handy and the bus notified is not used anyway. For powernv, this copies the existing bus notifier, makes it work for powernv only which means an easy way of getting to the table_group pointer. This was tested on VFs but should also support physical PCI hotplug. Since iommu_add_device() receives the table_group pointer directly, pseries does not do TCE cache invalidation (the hypervisor does) nor allow multiple groups per a VFIO container (in other words sharing an IOMMU table between partitionable endpoints), this removes iommu_table_group_link from pseries. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-19 16:52:21 +08:00
static int tce_iommu_bus_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
switch (action) {
case BUS_NOTIFY_DEL_DEVICE:
iommu_del_device(dev);
return 0;
default:
return 0;
}
}
static struct notifier_block tce_iommu_bus_nb = {
.notifier_call = tce_iommu_bus_notifier,
};
static int __init tce_iommu_bus_notifier_init(void)
{
bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
return 0;
}
machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init);