UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/dwc2/platform.c

632 lines
16 KiB
C
Raw Normal View History

staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
/*
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
#include <linux/clk.h>
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
#include <linux/device.h>
#include <linux/dma-mapping.h>
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
#include <linux/of_device.h>
usb: dwc2: gadget: add mutex to serialize init/deinit calls This patch adds mutex, which protects initialization and deinitialization procedures against suspend/resume methods. This mutex will be needed by the updated suspend/resume calls, which tracks gadget state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 22:14:48 +08:00
#include <linux/mutex.h>
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
#include <linux/platform_device.h>
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
usb: dwc2: add 'mode' which based on Kconfig select or dts setting According to the "dr_mode", the otg controller can work as device role and host role. Some boards always want to use host mode and some other boards want to use gadget mode. We use the dts setting to set dwc2's mode, rather than fixing it to whatever hardware says. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-06 09:01:50 +08:00
#include <linux/usb/of.h>
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
#include "core.h"
#include "hcd.h"
usb: dwc2: move debugfs code to a separate file Prepare to add more debug code. Moreover, don't save dentry * for each file in struct dwc2_hsotg as clean up is done with debugfs_remove_recursive(). s3c_hsotg_delete_debug() is removed altogether for the same reason. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:08:59 +08:00
#include "debug.h"
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
static const char dwc2_driver_name[] = "dwc2";
usb: dwc2: add support of hi6220 Support hisilicon,hi6220-usb for HiKey board Acked-by: Rob Herring <robh@kernel.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-18 15:39:47 +08:00
static const struct dwc2_core_params params_hi6220 = {
.otg_cap = 2, /* No HNP/SRP capable */
.otg_ver = 0, /* 1.3 */
.dma_enable = 1,
.dma_desc_enable = 0,
.dma_desc_fs_enable = 0,
.speed = 0, /* High Speed */
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = 1,
.host_rx_fifo_size = 512,
.host_nperio_tx_fifo_size = 512,
.host_perio_tx_fifo_size = 512,
.max_transfer_size = 65535,
.max_packet_count = 511,
.host_channels = 16,
.phy_type = 1, /* UTMI */
.phy_utmi_width = 8,
.phy_ulpi_ddr = 0, /* Single */
.phy_ulpi_ext_vbus = 0,
.i2c_enable = 0,
.ulpi_fs_ls = 0,
.host_support_fs_ls_low_power = 0,
.host_ls_low_power_phy_clk = 0, /* 48 MHz */
.ts_dline = 0,
.reload_ctl = 0,
.ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = 0,
.external_id_pin_ctl = -1,
.hibernation = -1,
};
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
static const struct dwc2_core_params params_bcm2835 = {
.otg_cap = 0, /* HNP/SRP capable */
.otg_ver = 0, /* 1.3 */
.dma_enable = 1,
.dma_desc_enable = 0,
usb: dwc2: host: enable descriptor dma for fs devices As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-20 18:49:28 +08:00
.dma_desc_fs_enable = 0,
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
.speed = 0, /* High Speed */
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = 1,
.host_rx_fifo_size = 774, /* 774 DWORDs */
.host_nperio_tx_fifo_size = 256, /* 256 DWORDs */
.host_perio_tx_fifo_size = 512, /* 512 DWORDs */
.max_transfer_size = 65535,
.max_packet_count = 511,
.host_channels = 8,
.phy_type = 1, /* UTMI */
.phy_utmi_width = 8, /* 8 bits */
.phy_ulpi_ddr = 0, /* Single */
.phy_ulpi_ext_vbus = 0,
.i2c_enable = 0,
.ulpi_fs_ls = 0,
.host_support_fs_ls_low_power = 0,
.host_ls_low_power_phy_clk = 0, /* 48 MHz */
.ts_dline = 0,
.reload_ctl = 0,
.ahbcfg = 0x10,
staging: dwc2: disable uframe_sched on the bcm2835 While Paul said that .uframe_sched should be enabled on the BCM2835, and doing so works fine with the built-in wired Ethernet, it prevents my WiFi dongle from operating correctly. Hence, disable the option so that everything works. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04 11:56:05 +08:00
.uframe_sched = 0,
usb: dwc2: add external_id_pin_ctl core parameter This is required due to an Intel specific hardware issue. Where id- pin setup causes glitches on the interrupt line when CONIDSTSCHG interrupt is enabled. Specify external_id_pin_ctl when an external driver (for example phy) can handle id change, so that CONIDSTSCHG interrupt can be disabled from the controller. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:04 +08:00
.external_id_pin_ctl = -1,
usb: dwc2: add hibernation core parameter dwc2 may not be able to exit from hibernation if the hardware does not provide a way to detect resume signalling in this state. Thus, add the possibility to disable hibernation feature. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:19 +08:00
.hibernation = -1,
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
};
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
static const struct dwc2_core_params params_rk3066 = {
.otg_cap = 2, /* non-HNP/non-SRP */
.otg_ver = -1,
.dma_enable = -1,
.dma_desc_enable = 0,
usb: dwc2: host: enable descriptor dma for fs devices As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-20 18:49:28 +08:00
.dma_desc_fs_enable = 0,
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
.speed = -1,
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = -1,
.host_rx_fifo_size = 520, /* 520 DWORDs */
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
.host_perio_tx_fifo_size = 256, /* 256 DWORDs */
usb: dwc2: rockchip: Make the max_transfer_size automatic Previously we needed to set the max_transfer_size to explicitly be 65535 because the old driver would detect that our hardware could support much bigger transfers and then would try to do them. This wouldn't work since the DMA alignment code couldn't support it. Later in commit e8f8c14d9da7 ("usb: dwc2: clip max_transfer_size to 65535") upstream added support for clipping this automatically. Since that commit it has been OK to just use "-1" (default), but nobody bothered to change it. Let's change it to default now for two reasons: - It's nice to use autodetected params. - If we can remove the 65535 limit, we can transfer more! Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-01-29 10:19:52 +08:00
.max_transfer_size = -1,
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
.max_packet_count = -1,
.host_channels = -1,
.phy_type = -1,
.phy_utmi_width = -1,
.phy_ulpi_ddr = -1,
.phy_ulpi_ext_vbus = -1,
.i2c_enable = -1,
.ulpi_fs_ls = -1,
.host_support_fs_ls_low_power = -1,
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
usb: dwc2: host: Fix ahbcfg for rk3066 The comment for ahbcfg for rk3066 parameters (also used for rk3288) claimed that ahbcfg was INCR16, but it wasn't. Since the bits weren't shifted properly, the 0x7 ended up being masked and we ended up programming 0x3 for the HBstLen. Let's set it to INCR16 properly. As per Wu Liang Feng at Rockchip this may increase transmission efficiency. I did blackbox tests with writing 0s to a USB-based SD reader (forcefully capping CPU Freq to try to measure efficiency): cd /sys/devices/system/cpu/cpu0/cpufreq echo userspace > scaling_governor echo 126000 > scaling_setspeed for i in $(seq 10); do dd if=/dev/zero of=/dev/sdb bs=1M count=750 done With the above tests I found that speeds went from ~15MB/s to ~18MB/s. Note that most other tests I did (including reading from the same USB reader) didn't show any difference in performance. Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: John Youn <johnyoun@synopsys.com> Reviewed-by: Liangfeng Wu <wulf@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-21 07:33:53 +08:00
.ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
GAHBCFG_HBSTLEN_SHIFT,
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
.uframe_sched = -1,
usb: dwc2: add external_id_pin_ctl core parameter This is required due to an Intel specific hardware issue. Where id- pin setup causes glitches on the interrupt line when CONIDSTSCHG interrupt is enabled. Specify external_id_pin_ctl when an external driver (for example phy) can handle id change, so that CONIDSTSCHG interrupt can be disabled from the controller. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:04 +08:00
.external_id_pin_ctl = -1,
usb: dwc2: add hibernation core parameter dwc2 may not be able to exit from hibernation if the hardware does not provide a way to detect resume signalling in this state. Thus, add the possibility to disable hibernation feature. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:19 +08:00
.hibernation = -1,
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
};
usb: dwc2: Fix dr_mode validation The dr_mode parameter was being checked against how the dwc2 module was being configured at compile time. But it wasn't checked against the hardware capabilities, nor were the hardware capabilities checked against the compilation parameters. This commit adds those checks and adjusts dr_mode to an appropriate value, if needed. If the hardware capabilities and module compilation do not match then we fail as it wouldn't be possible to run properly. The hardware, module, and dr_mode, can each be set to host, device, or otg. Check that all these values are compatible and adjust the value of dr_mode if possible. The following table summarizes the behavior: actual HW MOD dr_mode dr_mode ------------------------------ HST HST any : HST HST DEV any : --- HST OTG any : HST DEV HST any : --- DEV DEV any : DEV DEV OTG any : DEV OTG HST any : HST OTG DEV any : DEV OTG OTG any : dr_mode Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-18 03:16:31 +08:00
/*
* Check the dr_mode against the module configuration and hardware
* capabilities.
*
* The hardware, module, and dr_mode, can each be set to host, device,
* or otg. Check that all these values are compatible and adjust the
* value of dr_mode if possible.
*
* actual
* HW MOD dr_mode dr_mode
* ------------------------------
* HST HST any : HST
* HST DEV any : ---
* HST OTG any : HST
*
* DEV HST any : ---
* DEV DEV any : DEV
* DEV OTG any : DEV
*
* OTG HST any : HST
* OTG DEV any : DEV
* OTG OTG any : dr_mode
*/
static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
{
enum usb_dr_mode mode;
hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
hsotg->dr_mode = USB_DR_MODE_OTG;
mode = hsotg->dr_mode;
if (dwc2_hw_is_device(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
dev_err(hsotg->dev,
"Controller does not support host mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_PERIPHERAL;
} else if (dwc2_hw_is_host(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
dev_err(hsotg->dev,
"Controller does not support device mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_HOST;
} else {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
mode = USB_DR_MODE_HOST;
else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
mode = USB_DR_MODE_PERIPHERAL;
}
if (mode != hsotg->dr_mode) {
dev_warn(hsotg->dev,
"Configuration mismatch. dr_mode forced to %s\n",
mode == USB_DR_MODE_HOST ? "host" : "device");
hsotg->dr_mode = mode;
}
return 0;
}
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return ret;
usb: dwc2: make otg clk optional Fixes commit 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") The above commit consolidated the low-level phy access into a common location. This change made the otg clk a requirement and broke some platforms when it was moved into platform.c. So make clk handling optional again. Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-14 01:02:12 +08:00
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
return ret;
}
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
if (hsotg->uphy)
ret = usb_phy_init(hsotg->uphy);
else if (hsotg->plat && hsotg->plat->phy_init)
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
else {
ret = phy_power_on(hsotg->phy);
if (ret == 0)
ret = phy_init(hsotg->phy);
}
return ret;
}
/**
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_enable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = true;
return ret;
}
static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret = 0;
if (hsotg->uphy)
usb_phy_shutdown(hsotg->uphy);
else if (hsotg->plat && hsotg->plat->phy_exit)
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
else {
ret = phy_exit(hsotg->phy);
if (ret == 0)
ret = phy_power_off(hsotg->phy);
}
if (ret)
return ret;
usb: dwc2: make otg clk optional Fixes commit 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") The above commit consolidated the low-level phy access into a common location. This change made the otg clk a requirement and broke some platforms when it was moved into platform.c. So make clk handling optional again. Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-14 01:02:12 +08:00
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
return ret;
}
/**
* dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_disable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = false;
return ret;
}
static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
int i, ret;
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY and then fall back to pdata
*/
hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
if (IS_ERR(hsotg->phy)) {
usb: dwc2: Return errors from PHY When searching for PHYs, any error was treated as if the PHY did not exist or was not specified. Thus the probe function did not correctly return error conditions such as -EPROBE_DEFER. Fixed so that only a non-existing PHY is ignored and any other error is returned. Acked-by: Eric Anholt <eric@anholt.net> Reported-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-14 01:02:11 +08:00
ret = PTR_ERR(hsotg->phy);
switch (ret) {
case -ENODEV:
case -ENOSYS:
hsotg->phy = NULL;
break;
case -EPROBE_DEFER:
return ret;
default:
dev_err(hsotg->dev, "error getting phy %d\n", ret);
return ret;
}
}
if (!hsotg->phy) {
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
usb: dwc2: Return errors from PHY When searching for PHYs, any error was treated as if the PHY did not exist or was not specified. Thus the probe function did not correctly return error conditions such as -EPROBE_DEFER. Fixed so that only a non-existing PHY is ignored and any other error is returned. Acked-by: Eric Anholt <eric@anholt.net> Reported-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-14 01:02:11 +08:00
if (IS_ERR(hsotg->uphy)) {
ret = PTR_ERR(hsotg->uphy);
switch (ret) {
case -ENODEV:
case -ENXIO:
hsotg->uphy = NULL;
break;
case -EPROBE_DEFER:
return ret;
default:
dev_err(hsotg->dev, "error getting usb phy %d\n",
ret);
return ret;
}
}
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
}
usb: dwc2: Return errors from PHY When searching for PHYs, any error was treated as if the PHY did not exist or was not specified. Thus the probe function did not correctly return error conditions such as -EPROBE_DEFER. Fixed so that only a non-existing PHY is ignored and any other error is returned. Acked-by: Eric Anholt <eric@anholt.net> Reported-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-14 01:02:11 +08:00
hsotg->plat = dev_get_platdata(hsotg->dev);
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
if (hsotg->phy) {
/*
* If using the generic PHY framework, check if the PHY bus
* width is 8-bit and set the phyif appropriately.
*/
if (phy_get_bus_width(hsotg->phy) == 8)
hsotg->phyif = GUSBCFG_PHYIF8;
}
/* Clock */
hsotg->clk = devm_clk_get(hsotg->dev, "otg");
if (IS_ERR(hsotg->clk)) {
hsotg->clk = NULL;
dev_dbg(hsotg->dev, "cannot get otg clock\n");
}
/* Regulators */
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
return ret;
}
return 0;
}
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Platform device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
usb: dwc2: move debugfs code to a separate file Prepare to add more debug code. Moreover, don't save dentry * for each file in struct dwc2_hsotg as clean up is done with debugfs_remove_recursive(). s3c_hsotg_delete_debug() is removed altogether for the same reason. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:08:59 +08:00
dwc2_debugfs_exit(hsotg);
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
usb: dwc2: rename all s3c_* to dwc2_* this driver has long ago became dwc2.ko with both peripheral and host roles, there's no point in keeping the old function names. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-07 07:11:54 +08:00
dwc2_hsotg_remove(hsotg);
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
return 0;
}
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
/**
* dwc2_driver_shutdown() - Called on device shutdown
*
* @dev: Platform device
*
* In specific conditions (involving usb hubs) dwc2 devices can create a
* lot of interrupts, even to the point of overwhelming devices running
* at low frequencies. Some devices need to do special clock handling
* at shutdown-time which may bring the system clock below the threshold
* of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
* prevents reboots/poweroffs from getting stuck in such cases.
*/
static void dwc2_driver_shutdown(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
disable_irq(hsotg->irq);
}
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
usb: dwc2: add support of hi6220 Support hisilicon,hi6220-usb for HiKey board Acked-by: Rob Herring <robh@kernel.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-18 15:39:47 +08:00
{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
usb: dwc2: add compatible data for rockchip soc This patch add compatible data for dwc2 controller found on rk3066, rk3188 and rk3288 processors from rockchip. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08 11:55:57 +08:00
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
{ .compatible = "snps,dwc2", .data = NULL },
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Platform device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct platform_device *dev)
{
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
const struct of_device_id *match;
const struct dwc2_core_params *params;
struct dwc2_core_params defparams;
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
struct dwc2_hsotg *hsotg;
struct resource *res;
int retval;
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
} else {
/* Default all params to autodetect */
dwc2_set_all_params(&defparams, -1);
params = &defparams;
usb: dwc2: Disable descriptor dma mode by default Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-07 21:30:33 +08:00
/*
* Disable descriptor dma mode by default as the HW can support
* it, but does not support it for SPLIT transactions.
usb: dwc2: host: enable descriptor dma for fs devices As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-20 18:49:28 +08:00
* Disable it for FS devices as well.
usb: dwc2: Disable descriptor dma mode by default Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-07 21:30:33 +08:00
*/
defparams.dma_desc_enable = 0;
usb: dwc2: host: enable descriptor dma for fs devices As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-20 18:49:28 +08:00
defparams.dma_desc_fs_enable = 0;
staging: dwc2: set up all module params The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27 09:58:01 +08:00
}
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
hsotg->dev = &dev->dev;
staging: dwc2: Fix dma-enabled platform devices using a default dma_mask Platform devices added through OF usually do not have any dma_mask pointer set. If the hardware advertises DMA support, the driver will expect DMA buffers to be passed in, but the USB core will not do this due to lack of a dma mask, breaking all connectiviy. To fix this, set a default dma_mask by pointing it at the coherent_dma_mask and set their value to a 32 bit mask. This still allows any platform code to set any more specific mask if needed, but makes the driver work for most dma-enabled hardware. It would be great if this patch could be included in 3.10, since it is needed to make the dwc2 driver work on the ralink rt3052 target. Before, the plan was to set up the dma mask in MIPS platform code, but because of a similar change in ehci and the uglyness of the code for that, the plan for that infrastructure was dropped. This patch makes the setting of the dma_mask happen in the same way as the patch Stephen Warren (set device dma_mask without reference to global data). Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17 16:52:55 +08:00
/*
* Use reasonable defaults so platforms don't have to provide these.
*/
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
DMA-API: staging: use dma_set_coherent_mask() The correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly. Convert all direct write accesses to using the correct API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-10 23:56:16 +08:00
retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
if (retval)
return retval;
staging: dwc2: Fix dma-enabled platform devices using a default dma_mask Platform devices added through OF usually do not have any dma_mask pointer set. If the hardware advertises DMA support, the driver will expect DMA buffers to be passed in, but the USB core will not do this due to lack of a dma mask, breaking all connectiviy. To fix this, set a default dma_mask by pointing it at the coherent_dma_mask and set their value to a 32 bit mask. This still allows any platform code to set any more specific mask if needed, but makes the driver work for most dma-enabled hardware. It would be great if this patch could be included in 3.10, since it is needed to make the dwc2 driver work on the ralink rt3052 target. Before, the plan was to set up the dma mask in MIPS platform code, but because of a similar change in ehci and the uglyness of the code for that, the plan for that infrastructure was dropped. This patch makes the setting of the dma_mask happen in the same way as the patch Stephen Warren (set device dma_mask without reference to global data). Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17 16:52:55 +08:00
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
hsotg->regs = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(hsotg->regs))
return PTR_ERR(hsotg->regs);
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
retval = dwc2_lowlevel_hw_init(hsotg);
usb: dwc2: set parameter values in probe function So the parameters can be used in both host and gadget modes. Also consolidate param functions in the core.h Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:05 +08:00
if (retval)
return retval;
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
spin_lock_init(&hsotg->lock);
usb: dwc2: set parameter values in probe function So the parameters can be used in both host and gadget modes. Also consolidate param functions in the core.h Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:05 +08:00
hsotg->core_params = devm_kzalloc(&dev->dev,
sizeof(*hsotg->core_params), GFP_KERNEL);
if (!hsotg->core_params)
return -ENOMEM;
dwc2_set_all_params(hsotg->core_params, -1);
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
hsotg->irq = platform_get_irq(dev, 0);
if (hsotg->irq < 0) {
usb: dwc2: fix kernel oops during driver probe This patch make sure that all necessary members of dwc2_hsotg are initialized before the irq handler is requested. So the kernel oops triggered by dwc2_handle_common_intr has been fixed. dwc2 20980000.usb: Configuration mismatch. Forcing host mode dwc2 20980000.usb: no platform data or transceiver defined Unable to handle kernel paging request at virtual address cc860040 pgd = c0004000 [cc860040] *pgd=0b41e811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc3+ #19 Hardware name: BCM2835 task: cb494000 ti: cb4d0000 task.ti: cb4d0000 PC is at dwc2_is_controller_alive+0x18/0x34 LR is at dwc2_handle_common_intr+0x24/0xb60 Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-13 05:08:34 +08:00
dev_err(&dev->dev, "missing IRQ resource\n");
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
return hsotg->irq;
usb: dwc2: fix kernel oops during driver probe This patch make sure that all necessary members of dwc2_hsotg are initialized before the irq handler is requested. So the kernel oops triggered by dwc2_handle_common_intr has been fixed. dwc2 20980000.usb: Configuration mismatch. Forcing host mode dwc2 20980000.usb: no platform data or transceiver defined Unable to handle kernel paging request at virtual address cc860040 pgd = c0004000 [cc860040] *pgd=0b41e811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc3+ #19 Hardware name: BCM2835 task: cb494000 ti: cb4d0000 task.ti: cb4d0000 PC is at dwc2_is_controller_alive+0x18/0x34 LR is at dwc2_handle_common_intr+0x24/0xb60 Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-13 05:08:34 +08:00
}
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
hsotg->irq);
retval = devm_request_irq(hsotg->dev, hsotg->irq,
usb: dwc2: fix kernel oops during driver probe This patch make sure that all necessary members of dwc2_hsotg are initialized before the irq handler is requested. So the kernel oops triggered by dwc2_handle_common_intr has been fixed. dwc2 20980000.usb: Configuration mismatch. Forcing host mode dwc2 20980000.usb: no platform data or transceiver defined Unable to handle kernel paging request at virtual address cc860040 pgd = c0004000 [cc860040] *pgd=0b41e811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc3+ #19 Hardware name: BCM2835 task: cb494000 ti: cb4d0000 task.ti: cb4d0000 PC is at dwc2_is_controller_alive+0x18/0x34 LR is at dwc2_handle_common_intr+0x24/0xb60 Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-13 05:08:34 +08:00
dwc2_handle_common_intr, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
if (retval)
return retval;
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
retval = dwc2_lowlevel_hw_enable(hsotg);
if (retval)
return retval;
usb: dwc2: Fix dr_mode validation The dr_mode parameter was being checked against how the dwc2 module was being configured at compile time. But it wasn't checked against the hardware capabilities, nor were the hardware capabilities checked against the compilation parameters. This commit adds those checks and adjusts dr_mode to an appropriate value, if needed. If the hardware capabilities and module compilation do not match then we fail as it wouldn't be possible to run properly. The hardware, module, and dr_mode, can each be set to host, device, or otg. Check that all these values are compatible and adjust the value of dr_mode if possible. The following table summarizes the behavior: actual HW MOD dr_mode dr_mode ------------------------------ HST HST any : HST HST DEV any : --- HST OTG any : HST DEV HST any : --- DEV DEV any : DEV DEV OTG any : DEV OTG HST any : HST OTG DEV any : DEV OTG OTG any : dr_mode Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-18 03:16:31 +08:00
retval = dwc2_get_dr_mode(hsotg);
if (retval)
return retval;
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB ethernet fails, due to being unable to pick up proper parameters when performing a plain reset before reading hw params. Below shows the results of the gnptxfsiz and hptxfsiz with and before and after reverting this (from Stefan Wahren): So here is the probe result before Patch 1 is applied: [ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000 [ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000 [ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 1.394249] dwc2 20980000.usb: DWC OTG Controller [ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000 And here is the probe result after Patch 1 is applied: [ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000 [ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000 [ 1.434301] dwc2 20980000.usb: DWC OTG Controller [ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000 Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-01-12 08:32:14 +08:00
/*
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
*/
dwc2_core_reset_and_force_dr_mode(hsotg);
/* Detect config values from hardware */
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
usb: dwc2: set parameter values in probe function So the parameters can be used in both host and gadget modes. Also consolidate param functions in the core.h Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:09:05 +08:00
/* Validate parameter values */
dwc2_set_parameters(hsotg, params);
usb: dwc2: Remove redundant reset in probe Reset already happens before this so just force the dr_mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-18 03:18:27 +08:00
dwc2_force_dr_mode(hsotg);
usb: dwc2: Move reset into dwc2_get_hwparams() The reset is required to get reset values of the hardware parameters but the force mode is not. Move the base reset into dwc2_get_hwparams() and do the reset and force mode afterwards. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-18 03:16:58 +08:00
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
retval = dwc2_gadget_init(hsotg, hsotg->irq);
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
if (retval)
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
goto error;
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
hsotg->gadget_enabled = 1;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
retval = dwc2_hcd_init(hsotg, hsotg->irq);
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
if (retval) {
if (hsotg->gadget_enabled)
usb: dwc2: rename all s3c_* to dwc2_* this driver has long ago became dwc2.ko with both peripheral and host roles, there's no point in keeping the old function names. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-07 07:11:54 +08:00
dwc2_hsotg_remove(hsotg);
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
goto error;
usb: dwc2: rework initialization of host and gadget in dual-role mode If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 20:41:10 +08:00
}
hsotg->hcd_enabled = 1;
}
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
platform_set_drvdata(dev, hsotg);
usb: dwc2: move debugfs code to a separate file Prepare to add more debug code. Moreover, don't save dentry * for each file in struct dwc2_hsotg as clean up is done with debugfs_remove_recursive(). s3c_hsotg_delete_debug() is removed altogether for the same reason. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-30 04:08:59 +08:00
dwc2_debugfs_init(hsotg);
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
return 0;
error:
dwc2_lowlevel_hw_disable(hsotg);
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
return retval;
}
usb: dwc2: Fix build warning when CONFIG_PM_SLEEP=n Building with bcm2835_defconfig, which has CONFIG_PM_SLEEP=n causes the following build warning: drivers/usb/dwc2/platform.c:227:12: warning: 'dwc2_suspend' defined but not used [-Wunused-function] drivers/usb/dwc2/platform.c:237:12: warning: 'dwc2_resume' defined but not used [-Wunused-function] Annotate these functions with '__maybe_unused' to prevent the warnings. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-19 22:37:53 +08:00
static int __maybe_unused dwc2_suspend(struct device *dev)
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
{
usb: dwc2: convert to use dev_pm_ops API Update suspend/resume to use dev_pm_ops API. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:35 +08:00
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
int ret = 0;
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
if (dwc2_is_device_mode(dwc2))
dwc2_hsotg_suspend(dwc2);
if (dwc2->ll_hw_enabled)
ret = __dwc2_lowlevel_hw_disable(dwc2);
usb: dwc2: platform: add generic PHY framework support Get PHY parameters from devicetree and power off usb PHY during system suspend. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-12-08 17:46:26 +08:00
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
return ret;
}
usb: dwc2: Fix build warning when CONFIG_PM_SLEEP=n Building with bcm2835_defconfig, which has CONFIG_PM_SLEEP=n causes the following build warning: drivers/usb/dwc2/platform.c:227:12: warning: 'dwc2_suspend' defined but not used [-Wunused-function] drivers/usb/dwc2/platform.c:237:12: warning: 'dwc2_resume' defined but not used [-Wunused-function] Annotate these functions with '__maybe_unused' to prevent the warnings. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-19 22:37:53 +08:00
static int __maybe_unused dwc2_resume(struct device *dev)
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
{
usb: dwc2: convert to use dev_pm_ops API Update suspend/resume to use dev_pm_ops API. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:35 +08:00
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
int ret = 0;
usb: dwc2: refactor common low-level hw code to platform.c DWC2 module on some platforms needs three additional hardware resources: phy controller, clock and power supply. All of them must be enabled/activated to properly initialize and operate. This was initially handled in s3c-hsotg driver, which has been converted to 'gadget' part of dwc2 driver. Unfortunately, not all of this code got moved to common platform code, what resulted in accessing DWC2 registers without enabling low-level hardware resources. This fails for example on Exynos SoCs. This patch moves all the code for managing those resources to common platform.c file and provides convenient wrappers for controlling them. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-14 14:52:29 +08:00
if (dwc2->ll_hw_enabled) {
ret = __dwc2_lowlevel_hw_enable(dwc2);
if (ret)
return ret;
}
if (dwc2_is_device_mode(dwc2))
usb: dwc2: rename all s3c_* to dwc2_* this driver has long ago became dwc2.ko with both peripheral and host roles, there's no point in keeping the old function names. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-07 07:11:54 +08:00
ret = dwc2_hsotg_resume(dwc2);
usb: dwc2: platform: add generic PHY framework support Get PHY parameters from devicetree and power off usb PHY during system suspend. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-12-08 17:46:26 +08:00
usb: dwc2: Move gadget probe function into platform code This patch will aggregate the probing of gadget/hcd driver into platform.c. The gadget probe funtion is converted into gadget_init that is now only responsible for gadget only initialization. All the gadget resources are now handled by platform.c Since the host workqueue will not get initialized if the driver is configured for peripheral mode only. Thus we need to check for wq_otg before calling queue_work(). Also, we move spin_lock_init to common location for both host and gadget that is either in platform.c or pci.c. We also move suspend/resume code to common platform code. Lastly, move the "samsung,s3c6400-hsotg" binding into dwc2_of_match_table. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:34 +08:00
return ret;
}
usb: dwc2: convert to use dev_pm_ops API Update suspend/resume to use dev_pm_ops API. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:35 +08:00
static const struct dev_pm_ops dwc2_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
static struct platform_driver dwc2_platform_driver = {
.driver = {
staging: Remove superfluous name casts device_driver.name is "const char *" Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13 03:07:19 +08:00
.name = dwc2_driver_name,
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
.of_match_table = dwc2_of_match_table,
usb: dwc2: convert to use dev_pm_ops API Update suspend/resume to use dev_pm_ops API. Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-12 01:13:35 +08:00
.pm = &dwc2_dev_pm_ops,
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
},
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
usb: dwc2: add shutdown callback to platform variant In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-19 02:30:59 +08:00
.shutdown = dwc2_driver_shutdown,
staging: dwc2: add platform device bindings This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 05:00:19 +08:00
};
module_platform_driver(dwc2_platform_driver);
MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
MODULE_LICENSE("Dual BSD/GPL");