OpenCloudOS-Kernel/sound/usb/mixer_quirks.c

3193 lines
85 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* USB Audio Driver for ALSA
*
* Quirks and vendor-specific extensions for mixer interfaces
*
* Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
*
* Many codes borrowed from audio.c by
* Alan Cox (alan@lxorguk.ukuu.org.uk)
* Thomas Sailer (sailer@ife.ee.ethz.ch)
*
* Audio Advantage Micro II support added by:
* Przemek Rudy (prudy1@o2.pl)
*/
#include <linux/hid.h>
#include <linux/init.h>
#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/audio.h>
#include <sound/asoundef.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/hwdep.h>
#include <sound/info.h>
#include <sound/tlv.h>
#include "usbaudio.h"
#include "mixer.h"
#include "mixer_quirks.h"
#include "mixer_scarlett.h"
#include "mixer_scarlett_gen2.h"
#include "mixer_us16x08.h"
#include "mixer_s1810c.h"
#include "helper.h"
struct std_mono_table {
unsigned int unitid, control, cmask;
int val_type;
const char *name;
snd_kcontrol_tlv_rw_t *tlv_callback;
};
/* This function allows for the creation of standard UAC controls.
* See the quirks for M-Audio FTUs or Ebox-44.
* If you don't want to set a TLV callback pass NULL.
*
* Since there doesn't seem to be a devices that needs a multichannel
* version, we keep it mono for simplicity.
*/
static int snd_create_std_mono_ctl_offset(struct usb_mixer_interface *mixer,
unsigned int unitid,
unsigned int control,
unsigned int cmask,
int val_type,
unsigned int idx_off,
const char *name,
snd_kcontrol_tlv_rw_t *tlv_callback)
{
struct usb_mixer_elem_info *cval;
struct snd_kcontrol *kctl;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (!cval)
return -ENOMEM;
snd_usb_mixer_elem_init_std(&cval->head, mixer, unitid);
cval->val_type = val_type;
cval->channels = 1;
cval->control = control;
cval->cmask = cmask;
cval->idx_off = idx_off;
/* get_min_max() is called only for integer volumes later,
* so provide a short-cut for booleans */
cval->min = 0;
cval->max = 1;
cval->res = 0;
cval->dBmin = 0;
cval->dBmax = 0;
/* Create control */
kctl = snd_ctl_new1(snd_usb_feature_unit_ctl, cval);
if (!kctl) {
kfree(cval);
return -ENOMEM;
}
/* Set name */
snprintf(kctl->id.name, sizeof(kctl->id.name), name);
kctl->private_free = snd_usb_mixer_elem_free;
/* set TLV */
if (tlv_callback) {
kctl->tlv.c = tlv_callback;
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
}
/* Add control to mixer */
return snd_usb_mixer_add_control(&cval->head, kctl);
}
static int snd_create_std_mono_ctl(struct usb_mixer_interface *mixer,
unsigned int unitid,
unsigned int control,
unsigned int cmask,
int val_type,
const char *name,
snd_kcontrol_tlv_rw_t *tlv_callback)
{
return snd_create_std_mono_ctl_offset(mixer, unitid, control, cmask,
val_type, 0 /* Offset */, name, tlv_callback);
}
/*
* Create a set of standard UAC controls from a table
*/
static int snd_create_std_mono_table(struct usb_mixer_interface *mixer,
const struct std_mono_table *t)
{
int err;
while (t->name != NULL) {
err = snd_create_std_mono_ctl(mixer, t->unitid, t->control,
t->cmask, t->val_type, t->name, t->tlv_callback);
if (err < 0)
return err;
t++;
}
return 0;
}
static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer,
int id,
usb_mixer_elem_resume_func_t resume,
const struct snd_kcontrol_new *knew,
struct usb_mixer_elem_list **listp)
{
struct usb_mixer_elem_list *list;
struct snd_kcontrol *kctl;
list = kzalloc(sizeof(*list), GFP_KERNEL);
if (!list)
return -ENOMEM;
if (listp)
*listp = list;
list->mixer = mixer;
list->id = id;
list->reset_resume = resume;
kctl = snd_ctl_new1(knew, list);
if (!kctl) {
kfree(list);
return -ENOMEM;
}
kctl->private_free = snd_usb_mixer_elem_free;
/* don't use snd_usb_mixer_add_control() here, this is a special list element */
return snd_usb_mixer_add_list(list, kctl, false);
}
/*
* Sound Blaster remote control configuration
*
* format of remote control data:
* Extigy: xx 00
* Audigy 2 NX: 06 80 xx 00 00 00
* Live! 24-bit: 06 80 xx yy 22 83
*/
static const struct rc_config {
u32 usb_id;
u8 offset;
u8 length;
u8 packet_length;
u8 min_packet_length; /* minimum accepted length of the URB result */
u8 mute_mixer_id;
u32 mute_code;
} rc_configs[] = {
{ USB_ID(0x041e, 0x3000), 0, 1, 2, 1, 18, 0x0013 }, /* Extigy */
{ USB_ID(0x041e, 0x3020), 2, 1, 6, 6, 18, 0x0013 }, /* Audigy 2 NX */
{ USB_ID(0x041e, 0x3040), 2, 2, 6, 6, 2, 0x6e91 }, /* Live! 24-bit */
{ USB_ID(0x041e, 0x3042), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi S51 */
{ USB_ID(0x041e, 0x30df), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi S51 Pro */
{ USB_ID(0x041e, 0x3237), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi S51 Pro */
{ USB_ID(0x041e, 0x3263), 0, 1, 1, 1, 1, 0x000d }, /* Usb X-Fi S51 Pro */
{ USB_ID(0x041e, 0x3048), 2, 2, 6, 6, 2, 0x6e91 }, /* Toshiba SB0500 */
};
static void snd_usb_soundblaster_remote_complete(struct urb *urb)
{
struct usb_mixer_interface *mixer = urb->context;
const struct rc_config *rc = mixer->rc_cfg;
u32 code;
if (urb->status < 0 || urb->actual_length < rc->min_packet_length)
return;
code = mixer->rc_buffer[rc->offset];
if (rc->length == 2)
code |= mixer->rc_buffer[rc->offset + 1] << 8;
/* the Mute button actually changes the mixer control */
if (code == rc->mute_code)
snd_usb_mixer_notify_id(mixer, rc->mute_mixer_id);
mixer->rc_code = code;
wmb();
wake_up(&mixer->rc_waitq);
}
static long snd_usb_sbrc_hwdep_read(struct snd_hwdep *hw, char __user *buf,
long count, loff_t *offset)
{
struct usb_mixer_interface *mixer = hw->private_data;
int err;
u32 rc_code;
if (count != 1 && count != 4)
return -EINVAL;
err = wait_event_interruptible(mixer->rc_waitq,
(rc_code = xchg(&mixer->rc_code, 0)) != 0);
if (err == 0) {
if (count == 1)
err = put_user(rc_code, buf);
else
err = put_user(rc_code, (u32 __user *)buf);
}
return err < 0 ? err : count;
}
static __poll_t snd_usb_sbrc_hwdep_poll(struct snd_hwdep *hw, struct file *file,
poll_table *wait)
{
struct usb_mixer_interface *mixer = hw->private_data;
poll_wait(file, &mixer->rc_waitq, wait);
return mixer->rc_code ? EPOLLIN | EPOLLRDNORM : 0;
}
static int snd_usb_soundblaster_remote_init(struct usb_mixer_interface *mixer)
{
struct snd_hwdep *hwdep;
int err, len, i;
for (i = 0; i < ARRAY_SIZE(rc_configs); ++i)
if (rc_configs[i].usb_id == mixer->chip->usb_id)
break;
if (i >= ARRAY_SIZE(rc_configs))
return 0;
mixer->rc_cfg = &rc_configs[i];
len = mixer->rc_cfg->packet_length;
init_waitqueue_head(&mixer->rc_waitq);
err = snd_hwdep_new(mixer->chip->card, "SB remote control", 0, &hwdep);
if (err < 0)
return err;
snprintf(hwdep->name, sizeof(hwdep->name),
"%s remote control", mixer->chip->card->shortname);
hwdep->iface = SNDRV_HWDEP_IFACE_SB_RC;
hwdep->private_data = mixer;
hwdep->ops.read = snd_usb_sbrc_hwdep_read;
hwdep->ops.poll = snd_usb_sbrc_hwdep_poll;
hwdep->exclusive = 1;
mixer->rc_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!mixer->rc_urb)
return -ENOMEM;
mixer->rc_setup_packet = kmalloc(sizeof(*mixer->rc_setup_packet), GFP_KERNEL);
if (!mixer->rc_setup_packet) {
usb_free_urb(mixer->rc_urb);
mixer->rc_urb = NULL;
return -ENOMEM;
}
mixer->rc_setup_packet->bRequestType =
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
mixer->rc_setup_packet->bRequest = UAC_GET_MEM;
mixer->rc_setup_packet->wValue = cpu_to_le16(0);
mixer->rc_setup_packet->wIndex = cpu_to_le16(0);
mixer->rc_setup_packet->wLength = cpu_to_le16(len);
usb_fill_control_urb(mixer->rc_urb, mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
(u8*)mixer->rc_setup_packet, mixer->rc_buffer, len,
snd_usb_soundblaster_remote_complete, mixer);
return 0;
}
#define snd_audigy2nx_led_info snd_ctl_boolean_mono_info
static int snd_audigy2nx_led_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = kcontrol->private_value >> 8;
return 0;
}
static int snd_audigy2nx_led_update(struct usb_mixer_interface *mixer,
int value, int index)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
if (chip->usb_id == USB_ID(0x041e, 0x3042))
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
!value, 0, NULL, 0);
/* USB X-Fi S51 Pro */
if (chip->usb_id == USB_ID(0x041e, 0x30df))
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
!value, 0, NULL, 0);
else
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
value, index + 2, NULL, 0);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_audigy2nx_led_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct usb_mixer_interface *mixer = list->mixer;
int index = kcontrol->private_value & 0xff;
unsigned int value = ucontrol->value.integer.value[0];
int old_value = kcontrol->private_value >> 8;
int err;
if (value > 1)
return -EINVAL;
if (value == old_value)
return 0;
kcontrol->private_value = (value << 8) | index;
err = snd_audigy2nx_led_update(mixer, value, index);
return err < 0 ? err : 1;
}
static int snd_audigy2nx_led_resume(struct usb_mixer_elem_list *list)
{
int priv_value = list->kctl->private_value;
return snd_audigy2nx_led_update(list->mixer, priv_value >> 8,
priv_value & 0xff);
}
/* name and private_value are set dynamically */
static const struct snd_kcontrol_new snd_audigy2nx_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.info = snd_audigy2nx_led_info,
.get = snd_audigy2nx_led_get,
.put = snd_audigy2nx_led_put,
};
static const char * const snd_audigy2nx_led_names[] = {
"CMSS LED Switch",
"Power LED Switch",
"Dolby Digital LED Switch",
};
static int snd_audigy2nx_controls_create(struct usb_mixer_interface *mixer)
{
int i, err;
for (i = 0; i < ARRAY_SIZE(snd_audigy2nx_led_names); ++i) {
struct snd_kcontrol_new knew;
/* USB X-Fi S51 doesn't have a CMSS LED */
if ((mixer->chip->usb_id == USB_ID(0x041e, 0x3042)) && i == 0)
continue;
/* USB X-Fi S51 Pro doesn't have one either */
if ((mixer->chip->usb_id == USB_ID(0x041e, 0x30df)) && i == 0)
continue;
if (i > 1 && /* Live24ext has 2 LEDs only */
(mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3042) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x30df) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048)))
break;
knew = snd_audigy2nx_control;
knew.name = snd_audigy2nx_led_names[i];
knew.private_value = (1 << 8) | i; /* LED on as default */
err = add_single_ctl_with_resume(mixer, 0,
snd_audigy2nx_led_resume,
&knew, NULL);
if (err < 0)
return err;
}
return 0;
}
static void snd_audigy2nx_proc_read(struct snd_info_entry *entry,
struct snd_info_buffer *buffer)
{
static const struct sb_jack {
int unitid;
const char *name;
} jacks_audigy2nx[] = {
{4, "dig in "},
{7, "line in"},
{19, "spk out"},
{20, "hph out"},
{-1, NULL}
}, jacks_live24ext[] = {
{4, "line in"}, /* &1=Line, &2=Mic*/
{3, "hph out"}, /* headphones */
{0, "RC "}, /* last command, 6 bytes see rc_config above */
{-1, NULL}
};
const struct sb_jack *jacks;
struct usb_mixer_interface *mixer = entry->private_data;
int i, err;
u8 buf[3];
snd_iprintf(buffer, "%s jacks\n\n", mixer->chip->card->shortname);
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020))
jacks = jacks_audigy2nx;
else if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048))
jacks = jacks_live24ext;
else
return;
for (i = 0; jacks[i].name; ++i) {
snd_iprintf(buffer, "%s: ", jacks[i].name);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(mixer->chip);
if (err < 0)
return;
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
jacks[i].unitid << 8, buf, 3);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(mixer->chip);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
snd_iprintf(buffer, "?\n");
}
}
/* EMU0204 */
static int snd_emu0204_ch_switch_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char * const texts[2] = {"1/2", "3/4"};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static int snd_emu0204_ch_switch_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.enumerated.item[0] = kcontrol->private_value;
return 0;
}
static int snd_emu0204_ch_switch_update(struct usb_mixer_interface *mixer,
int value)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
unsigned char buf[2];
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
buf[0] = 0x01;
buf[1] = value ? 0x02 : 0x01;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
0x0400, 0x0e00, buf, 2);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_emu0204_ch_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct usb_mixer_interface *mixer = list->mixer;
unsigned int value = ucontrol->value.enumerated.item[0];
int err;
if (value > 1)
return -EINVAL;
if (value == kcontrol->private_value)
return 0;
kcontrol->private_value = value;
err = snd_emu0204_ch_switch_update(mixer, value);
return err < 0 ? err : 1;
}
static int snd_emu0204_ch_switch_resume(struct usb_mixer_elem_list *list)
{
return snd_emu0204_ch_switch_update(list->mixer,
list->kctl->private_value);
}
static const struct snd_kcontrol_new snd_emu0204_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Front Jack Channels",
.info = snd_emu0204_ch_switch_info,
.get = snd_emu0204_ch_switch_get,
.put = snd_emu0204_ch_switch_put,
.private_value = 0,
};
static int snd_emu0204_controls_create(struct usb_mixer_interface *mixer)
{
return add_single_ctl_with_resume(mixer, 0,
snd_emu0204_ch_switch_resume,
&snd_emu0204_control, NULL);
}
/* ASUS Xonar U1 / U3 controls */
static int snd_xonar_u1_switch_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = !!(kcontrol->private_value & 0x02);
return 0;
}
static int snd_xonar_u1_switch_update(struct usb_mixer_interface *mixer,
unsigned char status)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
50, 0, &status, 1);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_xonar_u1_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
u8 old_status, new_status;
int err;
old_status = kcontrol->private_value;
if (ucontrol->value.integer.value[0])
new_status = old_status | 0x02;
else
new_status = old_status & ~0x02;
if (new_status == old_status)
return 0;
kcontrol->private_value = new_status;
err = snd_xonar_u1_switch_update(list->mixer, new_status);
return err < 0 ? err : 1;
}
static int snd_xonar_u1_switch_resume(struct usb_mixer_elem_list *list)
{
return snd_xonar_u1_switch_update(list->mixer,
list->kctl->private_value);
}
static const struct snd_kcontrol_new snd_xonar_u1_output_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Digital Playback Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_xonar_u1_switch_get,
.put = snd_xonar_u1_switch_put,
.private_value = 0x05,
};
static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer)
{
return add_single_ctl_with_resume(mixer, 0,
snd_xonar_u1_switch_resume,
&snd_xonar_u1_output_switch, NULL);
}
/* Digidesign Mbox 1 clock source switch (internal/spdif) */
static int snd_mbox1_switch_get(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.enumerated.item[0] = kctl->private_value;
return 0;
}
static int snd_mbox1_switch_update(struct usb_mixer_interface *mixer, int val)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
unsigned char buff[3];
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
/* Prepare for magic command to toggle clock source */
err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), 0x81,
USB_DIR_IN |
USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0x00, 0x500, buff, 1);
if (err < 0)
goto err;
err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), 0x81,
USB_DIR_IN |
USB_TYPE_CLASS |
USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
if (err < 0)
goto err;
/* 2 possibilities: Internal -> send sample rate
* S/PDIF sync -> send zeroes
* NB: Sample rate locked to 48kHz on purpose to
* prevent user from resetting the sample rate
* while S/PDIF sync is enabled and confusing
* this configuration.
*/
if (val == 0) {
buff[0] = 0x80;
buff[1] = 0xbb;
buff[2] = 0x00;
} else {
buff[0] = buff[1] = buff[2] = 0x00;
}
/* Send the magic command to toggle the clock source */
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), 0x1,
USB_TYPE_CLASS |
USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
if (err < 0)
goto err;
err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), 0x81,
USB_DIR_IN |
USB_TYPE_CLASS |
USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
if (err < 0)
goto err;
err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), 0x81,
USB_DIR_IN |
USB_TYPE_CLASS |
USB_RECIP_ENDPOINT, 0x100, 0x2, buff, 3);
if (err < 0)
goto err;
err:
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_mbox1_switch_put(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
struct usb_mixer_interface *mixer = list->mixer;
int err;
bool cur_val, new_val;
cur_val = kctl->private_value;
new_val = ucontrol->value.enumerated.item[0];
if (cur_val == new_val)
return 0;
kctl->private_value = new_val;
err = snd_mbox1_switch_update(mixer, new_val);
return err < 0 ? err : 1;
}
static int snd_mbox1_switch_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const texts[2] = {
"Internal",
"S/PDIF"
};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static int snd_mbox1_switch_resume(struct usb_mixer_elem_list *list)
{
return snd_mbox1_switch_update(list->mixer, list->kctl->private_value);
}
static const struct snd_kcontrol_new snd_mbox1_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Clock Source",
.index = 0,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.info = snd_mbox1_switch_info,
.get = snd_mbox1_switch_get,
.put = snd_mbox1_switch_put,
.private_value = 0
};
static int snd_mbox1_create_sync_switch(struct usb_mixer_interface *mixer)
{
return add_single_ctl_with_resume(mixer, 0,
snd_mbox1_switch_resume,
&snd_mbox1_switch, NULL);
}
/* Native Instruments device quirks */
#define _MAKE_NI_CONTROL(bRequest,wIndex) ((bRequest) << 16 | (wIndex))
static int snd_ni_control_init_val(struct usb_mixer_interface *mixer,
struct snd_kcontrol *kctl)
{
struct usb_device *dev = mixer->chip->dev;
unsigned int pval = kctl->private_value;
u8 value;
int err;
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
(pval >> 16) & 0xff,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0, pval & 0xffff, &value, 1);
if (err < 0) {
dev_err(&dev->dev,
"unable to issue vendor read request (ret = %d)", err);
return err;
}
kctl->private_value |= ((unsigned int)value << 24);
return 0;
}
static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = kcontrol->private_value >> 24;
return 0;
}
static int snd_ni_update_cur_val(struct usb_mixer_elem_list *list)
{
struct snd_usb_audio *chip = list->mixer->chip;
unsigned int pval = list->kctl->private_value;
int err;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = usb_control_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
(pval >> 16) & 0xff,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
pval >> 24, pval & 0xffff, NULL, 0, 1000);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
u8 oldval = (kcontrol->private_value >> 24) & 0xff;
u8 newval = ucontrol->value.integer.value[0];
int err;
if (oldval == newval)
return 0;
kcontrol->private_value &= ~(0xff << 24);
kcontrol->private_value |= (unsigned int)newval << 24;
err = snd_ni_update_cur_val(list);
return err < 0 ? err : 1;
}
static const struct snd_kcontrol_new snd_nativeinstruments_ta6_mixers[] = {
{
.name = "Direct Thru Channel A",
.private_value = _MAKE_NI_CONTROL(0x01, 0x03),
},
{
.name = "Direct Thru Channel B",
.private_value = _MAKE_NI_CONTROL(0x01, 0x05),
},
{
.name = "Phono Input Channel A",
.private_value = _MAKE_NI_CONTROL(0x02, 0x03),
},
{
.name = "Phono Input Channel B",
.private_value = _MAKE_NI_CONTROL(0x02, 0x05),
},
};
static const struct snd_kcontrol_new snd_nativeinstruments_ta10_mixers[] = {
{
.name = "Direct Thru Channel A",
.private_value = _MAKE_NI_CONTROL(0x01, 0x03),
},
{
.name = "Direct Thru Channel B",
.private_value = _MAKE_NI_CONTROL(0x01, 0x05),
},
{
.name = "Direct Thru Channel C",
.private_value = _MAKE_NI_CONTROL(0x01, 0x07),
},
{
.name = "Direct Thru Channel D",
.private_value = _MAKE_NI_CONTROL(0x01, 0x09),
},
{
.name = "Phono Input Channel A",
.private_value = _MAKE_NI_CONTROL(0x02, 0x03),
},
{
.name = "Phono Input Channel B",
.private_value = _MAKE_NI_CONTROL(0x02, 0x05),
},
{
.name = "Phono Input Channel C",
.private_value = _MAKE_NI_CONTROL(0x02, 0x07),
},
{
.name = "Phono Input Channel D",
.private_value = _MAKE_NI_CONTROL(0x02, 0x09),
},
};
static int snd_nativeinstruments_create_mixer(struct usb_mixer_interface *mixer,
const struct snd_kcontrol_new *kc,
unsigned int count)
{
int i, err = 0;
struct snd_kcontrol_new template = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.get = snd_nativeinstruments_control_get,
.put = snd_nativeinstruments_control_put,
.info = snd_ctl_boolean_mono_info,
};
for (i = 0; i < count; i++) {
struct usb_mixer_elem_list *list;
template.name = kc[i].name;
template.private_value = kc[i].private_value;
err = add_single_ctl_with_resume(mixer, 0,
snd_ni_update_cur_val,
&template, &list);
if (err < 0)
break;
snd_ni_control_init_val(mixer, list->kctl);
}
return err;
}
/* M-Audio FastTrack Ultra quirks */
/* FTU Effect switch (also used by C400/C600) */
static int snd_ftu_eff_switch_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const texts[8] = {
"Room 1", "Room 2", "Room 3", "Hall 1",
"Hall 2", "Plate", "Delay", "Echo"
};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static int snd_ftu_eff_switch_init(struct usb_mixer_interface *mixer,
struct snd_kcontrol *kctl)
{
struct usb_device *dev = mixer->chip->dev;
unsigned int pval = kctl->private_value;
int err;
unsigned char value[2];
value[0] = 0x00;
value[1] = 0x00;
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
pval & 0xff00,
snd_usb_ctrl_intf(mixer->chip) | ((pval & 0xff) << 8),
value, 2);
if (err < 0)
return err;
kctl->private_value |= (unsigned int)value[0] << 24;
return 0;
}
static int snd_ftu_eff_switch_get(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.enumerated.item[0] = kctl->private_value >> 24;
return 0;
}
static int snd_ftu_eff_switch_update(struct usb_mixer_elem_list *list)
{
struct snd_usb_audio *chip = list->mixer->chip;
unsigned int pval = list->kctl->private_value;
unsigned char value[2];
int err;
value[0] = pval >> 24;
value[1] = 0;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
pval & 0xff00,
snd_usb_ctrl_intf(chip) | ((pval & 0xff) << 8),
value, 2);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_ftu_eff_switch_put(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
unsigned int pval = list->kctl->private_value;
int cur_val, err, new_val;
cur_val = pval >> 24;
new_val = ucontrol->value.enumerated.item[0];
if (cur_val == new_val)
return 0;
kctl->private_value &= ~(0xff << 24);
kctl->private_value |= new_val << 24;
err = snd_ftu_eff_switch_update(list);
return err < 0 ? err : 1;
}
static int snd_ftu_create_effect_switch(struct usb_mixer_interface *mixer,
int validx, int bUnitID)
{
static struct snd_kcontrol_new template = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Effect Program Switch",
.index = 0,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.info = snd_ftu_eff_switch_info,
.get = snd_ftu_eff_switch_get,
.put = snd_ftu_eff_switch_put
};
struct usb_mixer_elem_list *list;
int err;
err = add_single_ctl_with_resume(mixer, bUnitID,
snd_ftu_eff_switch_update,
&template, &list);
if (err < 0)
return err;
list->kctl->private_value = (validx << 8) | bUnitID;
snd_ftu_eff_switch_init(mixer, list->kctl);
return 0;
}
/* Create volume controls for FTU devices*/
static int snd_ftu_create_volume_ctls(struct usb_mixer_interface *mixer)
{
char name[64];
unsigned int control, cmask;
int in, out, err;
const unsigned int id = 5;
const int val_type = USB_MIXER_S16;
for (out = 0; out < 8; out++) {
control = out + 1;
for (in = 0; in < 8; in++) {
cmask = 1 << in;
snprintf(name, sizeof(name),
"AIn%d - Out%d Capture Volume",
in + 1, out + 1);
err = snd_create_std_mono_ctl(mixer, id, control,
cmask, val_type, name,
&snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
for (in = 8; in < 16; in++) {
cmask = 1 << in;
snprintf(name, sizeof(name),
"DIn%d - Out%d Playback Volume",
in - 7, out + 1);
err = snd_create_std_mono_ctl(mixer, id, control,
cmask, val_type, name,
&snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
}
return 0;
}
/* This control needs a volume quirk, see mixer.c */
static int snd_ftu_create_effect_volume_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Volume";
const unsigned int id = 6;
const int val_type = USB_MIXER_U8;
const unsigned int control = 2;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, snd_usb_mixer_vol_tlv);
}
/* This control needs a volume quirk, see mixer.c */
static int snd_ftu_create_effect_duration_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Duration";
const unsigned int id = 6;
const int val_type = USB_MIXER_S16;
const unsigned int control = 3;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, snd_usb_mixer_vol_tlv);
}
/* This control needs a volume quirk, see mixer.c */
static int snd_ftu_create_effect_feedback_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Feedback Volume";
const unsigned int id = 6;
const int val_type = USB_MIXER_U8;
const unsigned int control = 4;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, NULL);
}
static int snd_ftu_create_effect_return_ctls(struct usb_mixer_interface *mixer)
{
unsigned int cmask;
int err, ch;
char name[48];
const unsigned int id = 7;
const int val_type = USB_MIXER_S16;
const unsigned int control = 7;
for (ch = 0; ch < 4; ++ch) {
cmask = 1 << ch;
snprintf(name, sizeof(name),
"Effect Return %d Volume", ch + 1);
err = snd_create_std_mono_ctl(mixer, id, control,
cmask, val_type, name,
snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
return 0;
}
static int snd_ftu_create_effect_send_ctls(struct usb_mixer_interface *mixer)
{
unsigned int cmask;
int err, ch;
char name[48];
const unsigned int id = 5;
const int val_type = USB_MIXER_S16;
const unsigned int control = 9;
for (ch = 0; ch < 8; ++ch) {
cmask = 1 << ch;
snprintf(name, sizeof(name),
"Effect Send AIn%d Volume", ch + 1);
err = snd_create_std_mono_ctl(mixer, id, control, cmask,
val_type, name,
snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
for (ch = 8; ch < 16; ++ch) {
cmask = 1 << ch;
snprintf(name, sizeof(name),
"Effect Send DIn%d Volume", ch - 7);
err = snd_create_std_mono_ctl(mixer, id, control, cmask,
val_type, name,
snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
return 0;
}
static int snd_ftu_create_mixer(struct usb_mixer_interface *mixer)
{
int err;
err = snd_ftu_create_volume_ctls(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_switch(mixer, 1, 6);
if (err < 0)
return err;
err = snd_ftu_create_effect_volume_ctl(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_duration_ctl(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_feedback_ctl(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_return_ctls(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_send_ctls(mixer);
if (err < 0)
return err;
return 0;
}
void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
unsigned char samplerate_id)
{
struct usb_mixer_interface *mixer;
struct usb_mixer_elem_info *cval;
int unitid = 12; /* SampleRate ExtensionUnit ID */
list_for_each_entry(mixer, &chip->mixer_list, list) {
if (mixer->id_elems[unitid]) {
cval = mixer_elem_list_to_info(mixer->id_elems[unitid]);
snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR,
cval->control << 8,
samplerate_id);
snd_usb_mixer_notify_id(mixer, unitid);
break;
}
}
}
/* M-Audio Fast Track C400/C600 */
/* C400/C600 volume controls, this control needs a volume quirk, see mixer.c */
static int snd_c400_create_vol_ctls(struct usb_mixer_interface *mixer)
{
char name[64];
unsigned int cmask, offset;
int out, chan, err;
int num_outs = 0;
int num_ins = 0;
const unsigned int id = 0x40;
const int val_type = USB_MIXER_S16;
const int control = 1;
switch (mixer->chip->usb_id) {
case USB_ID(0x0763, 0x2030):
num_outs = 6;
num_ins = 4;
break;
case USB_ID(0x0763, 0x2031):
num_outs = 8;
num_ins = 6;
break;
}
for (chan = 0; chan < num_outs + num_ins; chan++) {
for (out = 0; out < num_outs; out++) {
if (chan < num_outs) {
snprintf(name, sizeof(name),
"PCM%d-Out%d Playback Volume",
chan + 1, out + 1);
} else {
snprintf(name, sizeof(name),
"In%d-Out%d Playback Volume",
chan - num_outs + 1, out + 1);
}
cmask = (out == 0) ? 0 : 1 << (out - 1);
offset = chan * num_outs;
err = snd_create_std_mono_ctl_offset(mixer, id, control,
cmask, val_type, offset, name,
&snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
}
return 0;
}
/* This control needs a volume quirk, see mixer.c */
static int snd_c400_create_effect_volume_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Volume";
const unsigned int id = 0x43;
const int val_type = USB_MIXER_U8;
const unsigned int control = 3;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, snd_usb_mixer_vol_tlv);
}
/* This control needs a volume quirk, see mixer.c */
static int snd_c400_create_effect_duration_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Duration";
const unsigned int id = 0x43;
const int val_type = USB_MIXER_S16;
const unsigned int control = 4;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, snd_usb_mixer_vol_tlv);
}
/* This control needs a volume quirk, see mixer.c */
static int snd_c400_create_effect_feedback_ctl(struct usb_mixer_interface *mixer)
{
static const char name[] = "Effect Feedback Volume";
const unsigned int id = 0x43;
const int val_type = USB_MIXER_U8;
const unsigned int control = 5;
const unsigned int cmask = 0;
return snd_create_std_mono_ctl(mixer, id, control, cmask, val_type,
name, NULL);
}
static int snd_c400_create_effect_vol_ctls(struct usb_mixer_interface *mixer)
{
char name[64];
unsigned int cmask;
int chan, err;
int num_outs = 0;
int num_ins = 0;
const unsigned int id = 0x42;
const int val_type = USB_MIXER_S16;
const int control = 1;
switch (mixer->chip->usb_id) {
case USB_ID(0x0763, 0x2030):
num_outs = 6;
num_ins = 4;
break;
case USB_ID(0x0763, 0x2031):
num_outs = 8;
num_ins = 6;
break;
}
for (chan = 0; chan < num_outs + num_ins; chan++) {
if (chan < num_outs) {
snprintf(name, sizeof(name),
"Effect Send DOut%d",
chan + 1);
} else {
snprintf(name, sizeof(name),
"Effect Send AIn%d",
chan - num_outs + 1);
}
cmask = (chan == 0) ? 0 : 1 << (chan - 1);
err = snd_create_std_mono_ctl(mixer, id, control,
cmask, val_type, name,
&snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
return 0;
}
static int snd_c400_create_effect_ret_vol_ctls(struct usb_mixer_interface *mixer)
{
char name[64];
unsigned int cmask;
int chan, err;
int num_outs = 0;
int offset = 0;
const unsigned int id = 0x40;
const int val_type = USB_MIXER_S16;
const int control = 1;
switch (mixer->chip->usb_id) {
case USB_ID(0x0763, 0x2030):
num_outs = 6;
offset = 0x3c;
/* { 0x3c, 0x43, 0x3e, 0x45, 0x40, 0x47 } */
break;
case USB_ID(0x0763, 0x2031):
num_outs = 8;
offset = 0x70;
/* { 0x70, 0x79, 0x72, 0x7b, 0x74, 0x7d, 0x76, 0x7f } */
break;
}
for (chan = 0; chan < num_outs; chan++) {
snprintf(name, sizeof(name),
"Effect Return %d",
chan + 1);
cmask = (chan == 0) ? 0 :
1 << (chan + (chan % 2) * num_outs - 1);
err = snd_create_std_mono_ctl_offset(mixer, id, control,
cmask, val_type, offset, name,
&snd_usb_mixer_vol_tlv);
if (err < 0)
return err;
}
return 0;
}
static int snd_c400_create_mixer(struct usb_mixer_interface *mixer)
{
int err;
err = snd_c400_create_vol_ctls(mixer);
if (err < 0)
return err;
err = snd_c400_create_effect_vol_ctls(mixer);
if (err < 0)
return err;
err = snd_c400_create_effect_ret_vol_ctls(mixer);
if (err < 0)
return err;
err = snd_ftu_create_effect_switch(mixer, 2, 0x43);
if (err < 0)
return err;
err = snd_c400_create_effect_volume_ctl(mixer);
if (err < 0)
return err;
err = snd_c400_create_effect_duration_ctl(mixer);
if (err < 0)
return err;
err = snd_c400_create_effect_feedback_ctl(mixer);
if (err < 0)
return err;
return 0;
}
/*
* The mixer units for Ebox-44 are corrupt, and even where they
* are valid they presents mono controls as L and R channels of
* stereo. So we provide a good mixer here.
*/
static const struct std_mono_table ebox44_table[] = {
{
.unitid = 4,
.control = 1,
.cmask = 0x0,
.val_type = USB_MIXER_INV_BOOLEAN,
.name = "Headphone Playback Switch"
},
{
.unitid = 4,
.control = 2,
.cmask = 0x1,
.val_type = USB_MIXER_S16,
.name = "Headphone A Mix Playback Volume"
},
{
.unitid = 4,
.control = 2,
.cmask = 0x2,
.val_type = USB_MIXER_S16,
.name = "Headphone B Mix Playback Volume"
},
{
.unitid = 7,
.control = 1,
.cmask = 0x0,
.val_type = USB_MIXER_INV_BOOLEAN,
.name = "Output Playback Switch"
},
{
.unitid = 7,
.control = 2,
.cmask = 0x1,
.val_type = USB_MIXER_S16,
.name = "Output A Playback Volume"
},
{
.unitid = 7,
.control = 2,
.cmask = 0x2,
.val_type = USB_MIXER_S16,
.name = "Output B Playback Volume"
},
{
.unitid = 10,
.control = 1,
.cmask = 0x0,
.val_type = USB_MIXER_INV_BOOLEAN,
.name = "Input Capture Switch"
},
{
.unitid = 10,
.control = 2,
.cmask = 0x1,
.val_type = USB_MIXER_S16,
.name = "Input A Capture Volume"
},
{
.unitid = 10,
.control = 2,
.cmask = 0x2,
.val_type = USB_MIXER_S16,
.name = "Input B Capture Volume"
},
{}
};
/* Audio Advantage Micro II findings:
*
* Mapping spdif AES bits to vendor register.bit:
* AES0: [0 0 0 0 2.3 2.2 2.1 2.0] - default 0x00
* AES1: [3.3 3.2.3.1.3.0 2.7 2.6 2.5 2.4] - default: 0x01
* AES2: [0 0 0 0 0 0 0 0]
* AES3: [0 0 0 0 0 0 x 0] - 'x' bit is set basing on standard usb request
* (UAC_EP_CS_ATTR_SAMPLE_RATE) for Audio Devices
*
* power on values:
* r2: 0x10
* r3: 0x20 (b7 is zeroed just before playback (except IEC61937) and set
* just after it to 0xa0, presumably it disables/mutes some analog
* parts when there is no audio.)
* r9: 0x28
*
* Optical transmitter on/off:
* vendor register.bit: 9.1
* 0 - on (0x28 register value)
* 1 - off (0x2a register value)
*
*/
static int snd_microii_spdif_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
static int snd_microii_spdif_default_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct snd_usb_audio *chip = list->mixer->chip;
int err;
struct usb_interface *iface;
struct usb_host_interface *alts;
unsigned int ep;
unsigned char data[3];
int rate;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
ucontrol->value.iec958.status[0] = kcontrol->private_value & 0xff;
ucontrol->value.iec958.status[1] = (kcontrol->private_value >> 8) & 0xff;
ucontrol->value.iec958.status[2] = 0x00;
/* use known values for that card: interface#1 altsetting#1 */
iface = usb_ifnum_to_if(chip->dev, 1);
if (!iface || iface->num_altsetting < 2) {
err = -EINVAL;
goto end;
}
alts = &iface->altsetting[1];
if (get_iface_desc(alts)->bNumEndpoints < 1) {
err = -EINVAL;
goto end;
}
ep = get_endpoint(alts, 0)->bEndpointAddress;
err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0),
UAC_GET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8,
ep,
data,
sizeof(data));
if (err < 0)
goto end;
rate = data[0] | (data[1] << 8) | (data[2] << 16);
ucontrol->value.iec958.status[3] = (rate == 48000) ?
IEC958_AES3_CON_FS_48000 : IEC958_AES3_CON_FS_44100;
err = 0;
end:
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_microii_spdif_default_update(struct usb_mixer_elem_list *list)
{
struct snd_usb_audio *chip = list->mixer->chip;
unsigned int pval = list->kctl->private_value;
u8 reg;
int err;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
reg = ((pval >> 4) & 0xf0) | (pval & 0x0f);
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
2,
NULL,
0);
if (err < 0)
goto end;
reg = (pval & IEC958_AES0_NONAUDIO) ? 0xa0 : 0x20;
reg |= (pval >> 12) & 0x0f;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
3,
NULL,
0);
if (err < 0)
goto end;
end:
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_microii_spdif_default_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
unsigned int pval, pval_old;
int err;
pval = pval_old = kcontrol->private_value;
pval &= 0xfffff0f0;
pval |= (ucontrol->value.iec958.status[1] & 0x0f) << 8;
pval |= (ucontrol->value.iec958.status[0] & 0x0f);
pval &= 0xffff0fff;
pval |= (ucontrol->value.iec958.status[1] & 0xf0) << 8;
/* The frequency bits in AES3 cannot be set via register access. */
/* Silently ignore any bits from the request that cannot be set. */
if (pval == pval_old)
return 0;
kcontrol->private_value = pval;
err = snd_microii_spdif_default_update(list);
return err < 0 ? err : 1;
}
static int snd_microii_spdif_mask_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.iec958.status[0] = 0x0f;
ucontrol->value.iec958.status[1] = 0xff;
ucontrol->value.iec958.status[2] = 0x00;
ucontrol->value.iec958.status[3] = 0x00;
return 0;
}
static int snd_microii_spdif_switch_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = !(kcontrol->private_value & 0x02);
return 0;
}
static int snd_microii_spdif_switch_update(struct usb_mixer_elem_list *list)
{
struct snd_usb_audio *chip = list->mixer->chip;
u8 reg = list->kctl->private_value;
int err;
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0),
UAC_SET_CUR,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
reg,
9,
NULL,
0);
ALSA: usb-audio: Avoid nested autoresume calls After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb13f61 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-25 22:09:00 +08:00
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_microii_spdif_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
u8 reg;
int err;
reg = ucontrol->value.integer.value[0] ? 0x28 : 0x2a;
if (reg != list->kctl->private_value)
return 0;
kcontrol->private_value = reg;
err = snd_microii_spdif_switch_update(list);
return err < 0 ? err : 1;
}
static const struct snd_kcontrol_new snd_microii_mixer_spdif[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
.info = snd_microii_spdif_info,
.get = snd_microii_spdif_default_get,
.put = snd_microii_spdif_default_put,
.private_value = 0x00000100UL,/* reset value */
},
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
.info = snd_microii_spdif_info,
.get = snd_microii_spdif_mask_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
.info = snd_ctl_boolean_mono_info,
.get = snd_microii_spdif_switch_get,
.put = snd_microii_spdif_switch_put,
.private_value = 0x00000028UL,/* reset value */
}
};
static int snd_microii_controls_create(struct usb_mixer_interface *mixer)
{
int err, i;
static const usb_mixer_elem_resume_func_t resume_funcs[] = {
snd_microii_spdif_default_update,
NULL,
snd_microii_spdif_switch_update
};
for (i = 0; i < ARRAY_SIZE(snd_microii_mixer_spdif); ++i) {
err = add_single_ctl_with_resume(mixer, 0,
resume_funcs[i],
&snd_microii_mixer_spdif[i],
NULL);
if (err < 0)
return err;
}
return 0;
}
/* Creative Sound Blaster E1 */
static int snd_soundblaster_e1_switch_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = kcontrol->private_value;
return 0;
}
static int snd_soundblaster_e1_switch_update(struct usb_mixer_interface *mixer,
unsigned char state)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
unsigned char buff[2];
buff[0] = 0x02;
buff[1] = state ? 0x02 : 0x00;
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), HID_REQ_SET_REPORT,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
0x0202, 3, buff, 2);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_soundblaster_e1_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
unsigned char value = !!ucontrol->value.integer.value[0];
int err;
if (kcontrol->private_value == value)
return 0;
kcontrol->private_value = value;
err = snd_soundblaster_e1_switch_update(list->mixer, value);
return err < 0 ? err : 1;
}
static int snd_soundblaster_e1_switch_resume(struct usb_mixer_elem_list *list)
{
return snd_soundblaster_e1_switch_update(list->mixer,
list->kctl->private_value);
}
static int snd_soundblaster_e1_switch_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const texts[2] = {
"Mic", "Aux"
};
return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
}
static const struct snd_kcontrol_new snd_soundblaster_e1_input_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Source",
.info = snd_soundblaster_e1_switch_info,
.get = snd_soundblaster_e1_switch_get,
.put = snd_soundblaster_e1_switch_put,
.private_value = 0,
};
static int snd_soundblaster_e1_switch_create(struct usb_mixer_interface *mixer)
{
return add_single_ctl_with_resume(mixer, 0,
snd_soundblaster_e1_switch_resume,
&snd_soundblaster_e1_input_switch,
NULL);
}
static void dell_dock_init_vol(struct snd_usb_audio *chip, int ch, int id)
{
u16 buf = 0;
snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
ch, snd_usb_ctrl_intf(chip) | (id << 8),
&buf, 2);
}
static int dell_dock_mixer_init(struct usb_mixer_interface *mixer)
{
/* fix to 0dB playback volumes */
dell_dock_init_vol(mixer->chip, 1, 16);
dell_dock_init_vol(mixer->chip, 2, 16);
dell_dock_init_vol(mixer->chip, 1, 19);
dell_dock_init_vol(mixer->chip, 2, 19);
return 0;
}
/* RME Class Compliant device quirks */
#define SND_RME_GET_STATUS1 23
#define SND_RME_GET_CURRENT_FREQ 17
#define SND_RME_CLK_SYSTEM_SHIFT 16
#define SND_RME_CLK_SYSTEM_MASK 0x1f
#define SND_RME_CLK_AES_SHIFT 8
#define SND_RME_CLK_SPDIF_SHIFT 12
#define SND_RME_CLK_AES_SPDIF_MASK 0xf
#define SND_RME_CLK_SYNC_SHIFT 6
#define SND_RME_CLK_SYNC_MASK 0x3
#define SND_RME_CLK_FREQMUL_SHIFT 18
#define SND_RME_CLK_FREQMUL_MASK 0x7
#define SND_RME_CLK_SYSTEM(x) \
((x >> SND_RME_CLK_SYSTEM_SHIFT) & SND_RME_CLK_SYSTEM_MASK)
#define SND_RME_CLK_AES(x) \
((x >> SND_RME_CLK_AES_SHIFT) & SND_RME_CLK_AES_SPDIF_MASK)
#define SND_RME_CLK_SPDIF(x) \
((x >> SND_RME_CLK_SPDIF_SHIFT) & SND_RME_CLK_AES_SPDIF_MASK)
#define SND_RME_CLK_SYNC(x) \
((x >> SND_RME_CLK_SYNC_SHIFT) & SND_RME_CLK_SYNC_MASK)
#define SND_RME_CLK_FREQMUL(x) \
((x >> SND_RME_CLK_FREQMUL_SHIFT) & SND_RME_CLK_FREQMUL_MASK)
#define SND_RME_CLK_AES_LOCK 0x1
#define SND_RME_CLK_AES_SYNC 0x4
#define SND_RME_CLK_SPDIF_LOCK 0x2
#define SND_RME_CLK_SPDIF_SYNC 0x8
#define SND_RME_SPDIF_IF_SHIFT 4
#define SND_RME_SPDIF_FORMAT_SHIFT 5
#define SND_RME_BINARY_MASK 0x1
#define SND_RME_SPDIF_IF(x) \
((x >> SND_RME_SPDIF_IF_SHIFT) & SND_RME_BINARY_MASK)
#define SND_RME_SPDIF_FORMAT(x) \
((x >> SND_RME_SPDIF_FORMAT_SHIFT) & SND_RME_BINARY_MASK)
static const u32 snd_rme_rate_table[] = {
32000, 44100, 48000, 50000,
64000, 88200, 96000, 100000,
128000, 176400, 192000, 200000,
256000, 352800, 384000, 400000,
512000, 705600, 768000, 800000
};
/* maximum number of items for AES and S/PDIF rates for above table */
#define SND_RME_RATE_IDX_AES_SPDIF_NUM 12
enum snd_rme_domain {
SND_RME_DOMAIN_SYSTEM,
SND_RME_DOMAIN_AES,
SND_RME_DOMAIN_SPDIF
};
enum snd_rme_clock_status {
SND_RME_CLOCK_NOLOCK,
SND_RME_CLOCK_LOCK,
SND_RME_CLOCK_SYNC
};
static int snd_rme_read_value(struct snd_usb_audio *chip,
unsigned int item,
u32 *value)
{
struct usb_device *dev = chip->dev;
int err;
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
item,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0,
value, sizeof(*value));
if (err < 0)
dev_err(&dev->dev,
"unable to issue vendor read request %d (ret = %d)",
item, err);
return err;
}
static int snd_rme_get_status1(struct snd_kcontrol *kcontrol,
u32 *status1)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct snd_usb_audio *chip = list->mixer->chip;
int err;
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_rme_read_value(chip, SND_RME_GET_STATUS1, status1);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_rme_rate_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u32 status1;
u32 rate = 0;
int idx;
int err;
err = snd_rme_get_status1(kcontrol, &status1);
if (err < 0)
return err;
switch (kcontrol->private_value) {
case SND_RME_DOMAIN_SYSTEM:
idx = SND_RME_CLK_SYSTEM(status1);
if (idx < ARRAY_SIZE(snd_rme_rate_table))
rate = snd_rme_rate_table[idx];
break;
case SND_RME_DOMAIN_AES:
idx = SND_RME_CLK_AES(status1);
if (idx < SND_RME_RATE_IDX_AES_SPDIF_NUM)
rate = snd_rme_rate_table[idx];
break;
case SND_RME_DOMAIN_SPDIF:
idx = SND_RME_CLK_SPDIF(status1);
if (idx < SND_RME_RATE_IDX_AES_SPDIF_NUM)
rate = snd_rme_rate_table[idx];
break;
default:
return -EINVAL;
}
ucontrol->value.integer.value[0] = rate;
return 0;
}
static int snd_rme_sync_state_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u32 status1;
int idx = SND_RME_CLOCK_NOLOCK;
int err;
err = snd_rme_get_status1(kcontrol, &status1);
if (err < 0)
return err;
switch (kcontrol->private_value) {
case SND_RME_DOMAIN_AES: /* AES */
if (status1 & SND_RME_CLK_AES_SYNC)
idx = SND_RME_CLOCK_SYNC;
else if (status1 & SND_RME_CLK_AES_LOCK)
idx = SND_RME_CLOCK_LOCK;
break;
case SND_RME_DOMAIN_SPDIF: /* SPDIF */
if (status1 & SND_RME_CLK_SPDIF_SYNC)
idx = SND_RME_CLOCK_SYNC;
else if (status1 & SND_RME_CLK_SPDIF_LOCK)
idx = SND_RME_CLOCK_LOCK;
break;
default:
return -EINVAL;
}
ucontrol->value.enumerated.item[0] = idx;
return 0;
}
static int snd_rme_spdif_if_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u32 status1;
int err;
err = snd_rme_get_status1(kcontrol, &status1);
if (err < 0)
return err;
ucontrol->value.enumerated.item[0] = SND_RME_SPDIF_IF(status1);
return 0;
}
static int snd_rme_spdif_format_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u32 status1;
int err;
err = snd_rme_get_status1(kcontrol, &status1);
if (err < 0)
return err;
ucontrol->value.enumerated.item[0] = SND_RME_SPDIF_FORMAT(status1);
return 0;
}
static int snd_rme_sync_source_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u32 status1;
int err;
err = snd_rme_get_status1(kcontrol, &status1);
if (err < 0)
return err;
ucontrol->value.enumerated.item[0] = SND_RME_CLK_SYNC(status1);
return 0;
}
static int snd_rme_current_freq_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct snd_usb_audio *chip = list->mixer->chip;
u32 status1;
const u64 num = 104857600000000ULL;
u32 den;
unsigned int freq;
int err;
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
err = snd_rme_read_value(chip, SND_RME_GET_STATUS1, &status1);
if (err < 0)
goto end;
err = snd_rme_read_value(chip, SND_RME_GET_CURRENT_FREQ, &den);
if (err < 0)
goto end;
freq = (den == 0) ? 0 : div64_u64(num, den);
freq <<= SND_RME_CLK_FREQMUL(status1);
ucontrol->value.integer.value[0] = freq;
end:
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_rme_rate_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
switch (kcontrol->private_value) {
case SND_RME_DOMAIN_SYSTEM:
uinfo->value.integer.min = 32000;
uinfo->value.integer.max = 800000;
break;
case SND_RME_DOMAIN_AES:
case SND_RME_DOMAIN_SPDIF:
default:
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 200000;
}
uinfo->value.integer.step = 0;
return 0;
}
static int snd_rme_sync_state_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const sync_states[] = {
"No Lock", "Lock", "Sync"
};
return snd_ctl_enum_info(uinfo, 1,
ARRAY_SIZE(sync_states), sync_states);
}
static int snd_rme_spdif_if_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const spdif_if[] = {
"Coaxial", "Optical"
};
return snd_ctl_enum_info(uinfo, 1,
ARRAY_SIZE(spdif_if), spdif_if);
}
static int snd_rme_spdif_format_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const optical_type[] = {
"Consumer", "Professional"
};
return snd_ctl_enum_info(uinfo, 1,
ARRAY_SIZE(optical_type), optical_type);
}
static int snd_rme_sync_source_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
static const char *const sync_sources[] = {
"Internal", "AES", "SPDIF", "Internal"
};
return snd_ctl_enum_info(uinfo, 1,
ARRAY_SIZE(sync_sources), sync_sources);
}
static const struct snd_kcontrol_new snd_rme_controls[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "AES Rate",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_rate_info,
.get = snd_rme_rate_get,
.private_value = SND_RME_DOMAIN_AES
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "AES Sync",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_sync_state_info,
.get = snd_rme_sync_state_get,
.private_value = SND_RME_DOMAIN_AES
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "SPDIF Rate",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_rate_info,
.get = snd_rme_rate_get,
.private_value = SND_RME_DOMAIN_SPDIF
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "SPDIF Sync",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_sync_state_info,
.get = snd_rme_sync_state_get,
.private_value = SND_RME_DOMAIN_SPDIF
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "SPDIF Interface",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_spdif_if_info,
.get = snd_rme_spdif_if_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "SPDIF Format",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_spdif_format_info,
.get = snd_rme_spdif_format_get,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Sync Source",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_sync_source_info,
.get = snd_rme_sync_source_get
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "System Rate",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_rate_info,
.get = snd_rme_rate_get,
.private_value = SND_RME_DOMAIN_SYSTEM
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Current Frequency",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_rme_rate_info,
.get = snd_rme_current_freq_get
}
};
static int snd_rme_controls_create(struct usb_mixer_interface *mixer)
{
int err, i;
for (i = 0; i < ARRAY_SIZE(snd_rme_controls); ++i) {
err = add_single_ctl_with_resume(mixer, 0,
NULL,
&snd_rme_controls[i],
NULL);
if (err < 0)
return err;
}
return 0;
}
/*
* RME Babyface Pro (FS)
*
* These devices exposes a couple of DSP functions via request to EP0.
* Switches are available via control registers, while routing is controlled
* by controlling the volume on each possible crossing point.
* Volume control is linear, from -inf (dec. 0) to +6dB (dec. 65536) with
* 0dB being at dec. 32768.
*/
enum {
SND_BBFPRO_CTL_REG1 = 0,
SND_BBFPRO_CTL_REG2
};
#define SND_BBFPRO_CTL_REG_MASK 1
#define SND_BBFPRO_CTL_IDX_MASK 0xff
#define SND_BBFPRO_CTL_IDX_SHIFT 1
#define SND_BBFPRO_CTL_VAL_MASK 1
#define SND_BBFPRO_CTL_VAL_SHIFT 9
#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0
#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1
#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7
#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8
#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10
#define SND_BBFPRO_CTL_REG2_48V_AN1 0
#define SND_BBFPRO_CTL_REG2_48V_AN2 1
#define SND_BBFPRO_CTL_REG2_SENS_IN3 2
#define SND_BBFPRO_CTL_REG2_SENS_IN4 3
#define SND_BBFPRO_CTL_REG2_PAD_AN1 4
#define SND_BBFPRO_CTL_REG2_PAD_AN2 5
#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff
#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff
#define SND_BBFPRO_MIXER_VAL_SHIFT 9
#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf
#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB
#define SND_BBFPRO_USBREQ_CTL_REG1 0x10
#define SND_BBFPRO_USBREQ_CTL_REG2 0x17
#define SND_BBFPRO_USBREQ_MIXER 0x12
static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg,
u8 index, u8 value)
{
int err;
u16 usb_req, usb_idx, usb_val;
struct snd_usb_audio *chip = mixer->chip;
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
if (reg == SND_BBFPRO_CTL_REG1) {
usb_req = SND_BBFPRO_USBREQ_CTL_REG1;
if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
usb_idx = 3;
usb_val = value ? 3 : 0;
} else {
usb_idx = 1 << index;
usb_val = value ? usb_idx : 0;
}
} else {
usb_req = SND_BBFPRO_USBREQ_CTL_REG2;
usb_idx = 1 << index;
usb_val = value ? usb_idx : 0;
}
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), usb_req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
usb_val, usb_idx, NULL, 0);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
u8 reg, idx, val;
int pv;
pv = kcontrol->private_value;
reg = pv & SND_BBFPRO_CTL_REG_MASK;
idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT;
if ((reg == SND_BBFPRO_CTL_REG1 &&
idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
(reg == SND_BBFPRO_CTL_REG2 &&
(idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
ucontrol->value.enumerated.item[0] = val;
} else {
ucontrol->value.integer.value[0] = val;
}
return 0;
}
static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
u8 reg, idx;
int pv;
pv = kcontrol->private_value;
reg = pv & SND_BBFPRO_CTL_REG_MASK;
idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
if (reg == SND_BBFPRO_CTL_REG1 &&
idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
static const char * const texts[2] = {
"AutoSync",
"Internal"
};
return snd_ctl_enum_info(uinfo, 1, 2, texts);
} else if (reg == SND_BBFPRO_CTL_REG2 &&
(idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) {
static const char * const texts[2] = {
"-10dBV",
"+4dBu"
};
return snd_ctl_enum_info(uinfo, 1, 2, texts);
}
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
return 0;
}
static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int err;
u8 reg, idx;
int old_value, pv, val;
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct usb_mixer_interface *mixer = list->mixer;
pv = kcontrol->private_value;
reg = pv & SND_BBFPRO_CTL_REG_MASK;
idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
if ((reg == SND_BBFPRO_CTL_REG1 &&
idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
(reg == SND_BBFPRO_CTL_REG2 &&
(idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
val = ucontrol->value.enumerated.item[0];
} else {
val = ucontrol->value.integer.value[0];
}
if (val > 1)
return -EINVAL;
if (val == old_value)
return 0;
kcontrol->private_value = reg
| ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT)
| ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT);
err = snd_bbfpro_ctl_update(mixer, reg, idx, val);
return err < 0 ? err : 1;
}
static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list)
{
u8 reg, idx;
int value, pv;
pv = list->kctl->private_value;
reg = pv & SND_BBFPRO_CTL_REG_MASK;
idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
return snd_bbfpro_ctl_update(list->mixer, reg, idx, value);
}
static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index,
u32 value)
{
struct snd_usb_audio *chip = mixer->chip;
int err;
u16 idx;
u16 usb_idx, usb_val;
u32 v;
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
idx = index & SND_BBFPRO_MIXER_IDX_MASK;
// 18 bit linear volume, split so 2 bits end up in index.
v = value & SND_BBFPRO_MIXER_VAL_MASK;
usb_idx = idx | (v & 0x3) << 14;
usb_val = (v >> 2) & 0xffff;
err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0),
SND_BBFPRO_USBREQ_MIXER,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE,
usb_val, usb_idx, NULL, 0);
snd_usb_unlock_shutdown(chip);
return err;
}
static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] =
kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
return 0;
}
static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN;
uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX;
return 0;
}
static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int err;
u16 idx;
u32 new_val, old_value, uvalue;
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
struct usb_mixer_interface *mixer = list->mixer;
uvalue = ucontrol->value.integer.value[0];
idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK;
old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
if (uvalue > SND_BBFPRO_MIXER_VAL_MAX)
return -EINVAL;
if (uvalue == old_value)
return 0;
new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK;
kcontrol->private_value = idx
| (new_val << SND_BBFPRO_MIXER_VAL_SHIFT);
err = snd_bbfpro_vol_update(mixer, idx, new_val);
return err < 0 ? err : 1;
}
static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list)
{
int pv = list->kctl->private_value;
u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK;
u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT)
& SND_BBFPRO_MIXER_VAL_MASK;
return snd_bbfpro_vol_update(list->mixer, idx, val);
}
// Predfine elements
static const struct snd_kcontrol_new snd_bbfpro_ctl_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.index = 0,
.info = snd_bbfpro_ctl_info,
.get = snd_bbfpro_ctl_get,
.put = snd_bbfpro_ctl_put
};
static const struct snd_kcontrol_new snd_bbfpro_vol_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.index = 0,
.info = snd_bbfpro_vol_info,
.get = snd_bbfpro_vol_get,
.put = snd_bbfpro_vol_put
};
static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg,
u8 index, char *name)
{
struct snd_kcontrol_new knew = snd_bbfpro_ctl_control;
knew.name = name;
knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK)
| ((index & SND_BBFPRO_CTL_IDX_MASK)
<< SND_BBFPRO_CTL_IDX_SHIFT);
return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume,
&knew, NULL);
}
static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index,
char *name)
{
struct snd_kcontrol_new knew = snd_bbfpro_vol_control;
knew.name = name;
knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK;
return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume,
&knew, NULL);
}
static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
{
int err, i, o;
char name[48];
static const char * const input[] = {
"AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3",
"ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
static const char * const output[] = {
"AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4",
"ADAT5", "ADAT6", "ADAT7", "ADAT8"};
for (o = 0 ; o < 12 ; ++o) {
for (i = 0 ; i < 12 ; ++i) {
// Line routing
snprintf(name, sizeof(name),
"%s-%s-%s Playback Volume",
(i < 2 ? "Mic" : "Line"),
input[i], output[o]);
err = snd_bbfpro_vol_add(mixer, (26 * o + i), name);
if (err < 0)
return err;
// PCM routing... yes, it is output remapping
snprintf(name, sizeof(name),
"PCM-%s-%s Playback Volume",
output[i], output[o]);
err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i),
name);
if (err < 0)
return err;
}
}
// Control Reg 1
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
SND_BBFPRO_CTL_REG1_CLK_OPTICAL,
"Sample Clock Source");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
SND_BBFPRO_CTL_REG1_SPDIF_PRO,
"IEC958 Pro Mask");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
SND_BBFPRO_CTL_REG1_SPDIF_EMPH,
"IEC958 Emphasis");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL,
"IEC958 Switch");
if (err < 0)
return err;
// Control Reg 2
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_48V_AN1,
"Mic-AN1 48V");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_48V_AN2,
"Mic-AN2 48V");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_SENS_IN3,
"Line-IN3 Sens.");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_SENS_IN4,
"Line-IN4 Sens.");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_PAD_AN1,
"Mic-AN1 PAD");
if (err < 0)
return err;
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
SND_BBFPRO_CTL_REG2_PAD_AN2,
"Mic-AN2 PAD");
if (err < 0)
return err;
return 0;
}
/*
* Pioneer DJ DJM Mixers
*
* These devices generally have options for soft-switching the playback and
* capture sources in addition to the recording level. Although different
* devices have different configurations, there seems to be canonical values
* for specific capture/playback types: See the definitions of these below.
*
* The wValue is masked with the stereo channel number. e.g. Setting Ch2 to
* capture phono would be 0x0203. Capture, playback and capture level have
* different wIndexes.
*/
// Capture types
#define SND_DJM_CAP_LINE 0x00
#define SND_DJM_CAP_CDLINE 0x01
#define SND_DJM_CAP_DIGITAL 0x02
#define SND_DJM_CAP_PHONO 0x03
#define SND_DJM_CAP_PFADER 0x06
#define SND_DJM_CAP_XFADERA 0x07
#define SND_DJM_CAP_XFADERB 0x08
#define SND_DJM_CAP_MIC 0x09
#define SND_DJM_CAP_AUX 0x0d
#define SND_DJM_CAP_RECOUT 0x0a
#define SND_DJM_CAP_NONE 0x0f
#define SND_DJM_CAP_CH1PFADER 0x11
#define SND_DJM_CAP_CH2PFADER 0x12
#define SND_DJM_CAP_CH3PFADER 0x13
#define SND_DJM_CAP_CH4PFADER 0x14
// Playback types
#define SND_DJM_PB_CH1 0x00
#define SND_DJM_PB_CH2 0x01
#define SND_DJM_PB_AUX 0x04
#define SND_DJM_WINDEX_CAP 0x8002
#define SND_DJM_WINDEX_CAPLVL 0x8003
#define SND_DJM_WINDEX_PB 0x8016
// kcontrol->private_value layout
#define SND_DJM_VALUE_MASK 0x0000ffff
#define SND_DJM_GROUP_MASK 0x00ff0000
#define SND_DJM_DEVICE_MASK 0xff000000
#define SND_DJM_GROUP_SHIFT 16
#define SND_DJM_DEVICE_SHIFT 24
// device table index
// used for the snd_djm_devices table, so please update accordingly
#define SND_DJM_250MK2_IDX 0x0
#define SND_DJM_750_IDX 0x1
#define SND_DJM_850_IDX 0x2
#define SND_DJM_900NXS2_IDX 0x3
#define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \
.name = _name, \
.options = snd_djm_opts_##suffix, \
.noptions = ARRAY_SIZE(snd_djm_opts_##suffix), \
.default_value = _default_value, \
.wIndex = _windex }
#define SND_DJM_DEVICE(suffix) { \
.controls = snd_djm_ctls_##suffix, \
.ncontrols = ARRAY_SIZE(snd_djm_ctls_##suffix) }
struct snd_djm_device {
const char *name;
const struct snd_djm_ctl *controls;
size_t ncontrols;
};
struct snd_djm_ctl {
const char *name;
const u16 *options;
size_t noptions;
u16 default_value;
u16 wIndex;
};
static const char *snd_djm_get_label_caplevel(u16 wvalue)
{
switch (wvalue) {
case 0x0000: return "-19dB";
case 0x0100: return "-15dB";
case 0x0200: return "-10dB";
case 0x0300: return "-5dB";
default: return NULL;
}
};
static const char *snd_djm_get_label_cap_common(u16 wvalue)
{
switch (wvalue & 0x00ff) {
case SND_DJM_CAP_LINE: return "Control Tone LINE";
case SND_DJM_CAP_CDLINE: return "Control Tone CD/LINE";
case SND_DJM_CAP_DIGITAL: return "Control Tone DIGITAL";
case SND_DJM_CAP_PHONO: return "Control Tone PHONO";
case SND_DJM_CAP_PFADER: return "Post Fader";
case SND_DJM_CAP_XFADERA: return "Cross Fader A";
case SND_DJM_CAP_XFADERB: return "Cross Fader B";
case SND_DJM_CAP_MIC: return "Mic";
case SND_DJM_CAP_RECOUT: return "Rec Out";
case SND_DJM_CAP_AUX: return "Aux";
case SND_DJM_CAP_NONE: return "None";
case SND_DJM_CAP_CH1PFADER: return "Post Fader Ch1";
case SND_DJM_CAP_CH2PFADER: return "Post Fader Ch2";
case SND_DJM_CAP_CH3PFADER: return "Post Fader Ch3";
case SND_DJM_CAP_CH4PFADER: return "Post Fader Ch4";
default: return NULL;
}
};
// The DJM-850 has different values for CD/LINE and LINE capture
// control options than the other DJM declared in this file.
static const char *snd_djm_get_label_cap_850(u16 wvalue)
{
switch (wvalue & 0x00ff) {
case 0x00: return "Control Tone CD/LINE";
case 0x01: return "Control Tone LINE";
default: return snd_djm_get_label_cap_common(wvalue);
}
};
static const char *snd_djm_get_label_cap(u8 device_idx, u16 wvalue)
{
switch (device_idx) {
case SND_DJM_850_IDX: return snd_djm_get_label_cap_850(wvalue);
default: return snd_djm_get_label_cap_common(wvalue);
}
};
static const char *snd_djm_get_label_pb(u16 wvalue)
{
switch (wvalue & 0x00ff) {
case SND_DJM_PB_CH1: return "Ch1";
case SND_DJM_PB_CH2: return "Ch2";
case SND_DJM_PB_AUX: return "Aux";
default: return NULL;
}
};
static const char *snd_djm_get_label(u8 device_idx, u16 wvalue, u16 windex)
{
switch (windex) {
case SND_DJM_WINDEX_CAPLVL: return snd_djm_get_label_caplevel(wvalue);
case SND_DJM_WINDEX_CAP: return snd_djm_get_label_cap(device_idx, wvalue);
case SND_DJM_WINDEX_PB: return snd_djm_get_label_pb(wvalue);
default: return NULL;
}
};
// common DJM capture level option values
static const u16 snd_djm_opts_cap_level[] = {
0x0000, 0x0100, 0x0200, 0x0300 };
// DJM-250MK2
static const u16 snd_djm_opts_250mk2_cap1[] = {
0x0103, 0x0100, 0x0106, 0x0107, 0x0108, 0x0109, 0x010d, 0x010a };
static const u16 snd_djm_opts_250mk2_cap2[] = {
0x0203, 0x0200, 0x0206, 0x0207, 0x0208, 0x0209, 0x020d, 0x020a };
static const u16 snd_djm_opts_250mk2_cap3[] = {
0x030a, 0x0311, 0x0312, 0x0307, 0x0308, 0x0309, 0x030d };
static const u16 snd_djm_opts_250mk2_pb1[] = { 0x0100, 0x0101, 0x0104 };
static const u16 snd_djm_opts_250mk2_pb2[] = { 0x0200, 0x0201, 0x0204 };
static const u16 snd_djm_opts_250mk2_pb3[] = { 0x0300, 0x0301, 0x0304 };
static const struct snd_djm_ctl snd_djm_ctls_250mk2[] = {
SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
SND_DJM_CTL("Ch1 Input", 250mk2_cap1, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch2 Input", 250mk2_cap2, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch3 Input", 250mk2_cap3, 0, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch1 Output", 250mk2_pb1, 0, SND_DJM_WINDEX_PB),
SND_DJM_CTL("Ch2 Output", 250mk2_pb2, 1, SND_DJM_WINDEX_PB),
SND_DJM_CTL("Ch3 Output", 250mk2_pb3, 2, SND_DJM_WINDEX_PB)
};
// DJM-750
static const u16 snd_djm_opts_750_cap1[] = {
0x0101, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a, 0x010f };
static const u16 snd_djm_opts_750_cap2[] = {
0x0200, 0x0201, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a, 0x020f };
static const u16 snd_djm_opts_750_cap3[] = {
0x0300, 0x0301, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a, 0x030f };
static const u16 snd_djm_opts_750_cap4[] = {
0x0401, 0x0403, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a, 0x040f };
static const struct snd_djm_ctl snd_djm_ctls_750[] = {
SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
SND_DJM_CTL("Ch1 Input", 750_cap1, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch2 Input", 750_cap2, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch3 Input", 750_cap3, 0, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch4 Input", 750_cap4, 0, SND_DJM_WINDEX_CAP)
};
// DJM-850
static const u16 snd_djm_opts_850_cap1[] = {
0x0100, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a, 0x010f };
static const u16 snd_djm_opts_850_cap2[] = {
0x0200, 0x0201, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a, 0x020f };
static const u16 snd_djm_opts_850_cap3[] = {
0x0300, 0x0301, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a, 0x030f };
static const u16 snd_djm_opts_850_cap4[] = {
0x0400, 0x0403, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a, 0x040f };
static const struct snd_djm_ctl snd_djm_ctls_850[] = {
SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
SND_DJM_CTL("Ch1 Input", 850_cap1, 1, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch2 Input", 850_cap2, 0, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch3 Input", 850_cap3, 0, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch4 Input", 850_cap4, 1, SND_DJM_WINDEX_CAP)
};
// DJM-900NXS2
static const u16 snd_djm_opts_900nxs2_cap1[] = {
0x0100, 0x0102, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a };
static const u16 snd_djm_opts_900nxs2_cap2[] = {
0x0200, 0x0202, 0x0203, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a };
static const u16 snd_djm_opts_900nxs2_cap3[] = {
0x0300, 0x0302, 0x0303, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a };
static const u16 snd_djm_opts_900nxs2_cap4[] = {
0x0400, 0x0402, 0x0403, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a };
static const u16 snd_djm_opts_900nxs2_cap5[] = {
0x0507, 0x0508, 0x0509, 0x050a, 0x0511, 0x0512, 0x0513, 0x0514 };
static const struct snd_djm_ctl snd_djm_ctls_900nxs2[] = {
SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
SND_DJM_CTL("Ch1 Input", 900nxs2_cap1, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch2 Input", 900nxs2_cap2, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch3 Input", 900nxs2_cap3, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch4 Input", 900nxs2_cap4, 2, SND_DJM_WINDEX_CAP),
SND_DJM_CTL("Ch5 Input", 900nxs2_cap5, 3, SND_DJM_WINDEX_CAP)
};
static const struct snd_djm_device snd_djm_devices[] = {
SND_DJM_DEVICE(250mk2),
SND_DJM_DEVICE(750),
SND_DJM_DEVICE(850),
SND_DJM_DEVICE(900nxs2)
};
static int snd_djm_controls_info(struct snd_kcontrol *kctl,
struct snd_ctl_elem_info *info)
{
unsigned long private_value = kctl->private_value;
u8 device_idx = (private_value & SND_DJM_DEVICE_MASK) >> SND_DJM_DEVICE_SHIFT;
u8 ctl_idx = (private_value & SND_DJM_GROUP_MASK) >> SND_DJM_GROUP_SHIFT;
const struct snd_djm_device *device = &snd_djm_devices[device_idx];
const char *name;
const struct snd_djm_ctl *ctl;
size_t noptions;
if (ctl_idx >= device->ncontrols)
return -EINVAL;
ctl = &device->controls[ctl_idx];
noptions = ctl->noptions;
if (info->value.enumerated.item >= noptions)
info->value.enumerated.item = noptions - 1;
name = snd_djm_get_label(device_idx,
ctl->options[info->value.enumerated.item],
ctl->wIndex);
if (!name)
return -EINVAL;
strscpy(info->value.enumerated.name, name, sizeof(info->value.enumerated.name));
info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
info->count = 1;
info->value.enumerated.items = noptions;
return 0;
}
static int snd_djm_controls_update(struct usb_mixer_interface *mixer,
u8 device_idx, u8 group, u16 value)
{
int err;
const struct snd_djm_device *device = &snd_djm_devices[device_idx];
if ((group >= device->ncontrols) || value >= device->controls[group].noptions)
return -EINVAL;
err = snd_usb_lock_shutdown(mixer->chip);
if (err)
return err;
err = snd_usb_ctl_msg(
mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0),
USB_REQ_SET_FEATURE,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
device->controls[group].options[value],
device->controls[group].wIndex,
NULL, 0);
snd_usb_unlock_shutdown(mixer->chip);
return err;
}
static int snd_djm_controls_get(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *elem)
{
elem->value.enumerated.item[0] = kctl->private_value & SND_DJM_VALUE_MASK;
return 0;
}
static int snd_djm_controls_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *elem)
{
struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl);
struct usb_mixer_interface *mixer = list->mixer;
unsigned long private_value = kctl->private_value;
u8 device = (private_value & SND_DJM_DEVICE_MASK) >> SND_DJM_DEVICE_SHIFT;
u8 group = (private_value & SND_DJM_GROUP_MASK) >> SND_DJM_GROUP_SHIFT;
u16 value = elem->value.enumerated.item[0];
kctl->private_value = (((unsigned long)device << SND_DJM_DEVICE_SHIFT) |
(group << SND_DJM_GROUP_SHIFT) |
value);
return snd_djm_controls_update(mixer, device, group, value);
}
static int snd_djm_controls_resume(struct usb_mixer_elem_list *list)
{
unsigned long private_value = list->kctl->private_value;
u8 device = (private_value & SND_DJM_DEVICE_MASK) >> SND_DJM_DEVICE_SHIFT;
u8 group = (private_value & SND_DJM_GROUP_MASK) >> SND_DJM_GROUP_SHIFT;
u16 value = (private_value & SND_DJM_VALUE_MASK);
return snd_djm_controls_update(list->mixer, device, group, value);
}
static int snd_djm_controls_create(struct usb_mixer_interface *mixer,
const u8 device_idx)
{
int err, i;
u16 value;
const struct snd_djm_device *device = &snd_djm_devices[device_idx];
struct snd_kcontrol_new knew = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.index = 0,
.info = snd_djm_controls_info,
.get = snd_djm_controls_get,
.put = snd_djm_controls_put
};
for (i = 0; i < device->ncontrols; i++) {
value = device->controls[i].default_value;
knew.name = device->controls[i].name;
knew.private_value = (
((unsigned long)device_idx << SND_DJM_DEVICE_SHIFT) |
(i << SND_DJM_GROUP_SHIFT) |
value);
err = snd_djm_controls_update(mixer, device_idx, i, value);
if (err)
return err;
err = add_single_ctl_with_resume(mixer, 0, snd_djm_controls_resume,
&knew, NULL);
if (err)
return err;
}
return 0;
}
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
{
int err = 0;
err = snd_usb_soundblaster_remote_init(mixer);
if (err < 0)
return err;
switch (mixer->chip->usb_id) {
/* Tascam US-16x08 */
case USB_ID(0x0644, 0x8047):
err = snd_us16x08_controls_create(mixer);
break;
case USB_ID(0x041e, 0x3020):
case USB_ID(0x041e, 0x3040):
case USB_ID(0x041e, 0x3042):
case USB_ID(0x041e, 0x30df):
case USB_ID(0x041e, 0x3048):
err = snd_audigy2nx_controls_create(mixer);
if (err < 0)
break;
snd_card_ro_proc_new(mixer->chip->card, "audigy2nx",
mixer, snd_audigy2nx_proc_read);
break;
/* EMU0204 */
case USB_ID(0x041e, 0x3f19):
err = snd_emu0204_controls_create(mixer);
break;
case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C400 */
err = snd_c400_create_mixer(mixer);
break;
case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */
err = snd_ftu_create_mixer(mixer);
break;
case USB_ID(0x0b05, 0x1739): /* ASUS Xonar U1 */
case USB_ID(0x0b05, 0x1743): /* ASUS Xonar U1 (2) */
case USB_ID(0x0b05, 0x17a0): /* ASUS Xonar U3 */
err = snd_xonar_u1_controls_create(mixer);
break;
case USB_ID(0x0d8c, 0x0103): /* Audio Advantage Micro II */
err = snd_microii_controls_create(mixer);
break;
case USB_ID(0x0dba, 0x1000): /* Digidesign Mbox 1 */
err = snd_mbox1_create_sync_switch(mixer);
break;
case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */
err = snd_nativeinstruments_create_mixer(mixer,
snd_nativeinstruments_ta6_mixers,
ARRAY_SIZE(snd_nativeinstruments_ta6_mixers));
break;
case USB_ID(0x17cc, 0x1021): /* Traktor Audio 10 */
err = snd_nativeinstruments_create_mixer(mixer,
snd_nativeinstruments_ta10_mixers,
ARRAY_SIZE(snd_nativeinstruments_ta10_mixers));
break;
case USB_ID(0x200c, 0x1018): /* Electrix Ebox-44 */
/* detection is disabled in mixer_maps.c */
err = snd_create_std_mono_table(mixer, ebox44_table);
break;
case USB_ID(0x1235, 0x8012): /* Focusrite Scarlett 6i6 */
case USB_ID(0x1235, 0x8002): /* Focusrite Scarlett 8i6 */
case USB_ID(0x1235, 0x8004): /* Focusrite Scarlett 18i6 */
case USB_ID(0x1235, 0x8014): /* Focusrite Scarlett 18i8 */
case USB_ID(0x1235, 0x800c): /* Focusrite Scarlett 18i20 */
err = snd_scarlett_controls_create(mixer);
break;
case USB_ID(0x1235, 0x8203): /* Focusrite Scarlett 6i6 2nd Gen */
case USB_ID(0x1235, 0x8204): /* Focusrite Scarlett 18i8 2nd Gen */
case USB_ID(0x1235, 0x8201): /* Focusrite Scarlett 18i20 2nd Gen */
err = snd_scarlett_gen2_controls_create(mixer);
break;
case USB_ID(0x041e, 0x323b): /* Creative Sound Blaster E1 */
err = snd_soundblaster_e1_switch_create(mixer);
break;
case USB_ID(0x0bda, 0x4014): /* Dell WD15 dock */
err = dell_dock_mixer_init(mixer);
break;
case USB_ID(0x2a39, 0x3fd2): /* RME ADI-2 Pro */
case USB_ID(0x2a39, 0x3fd3): /* RME ADI-2 DAC */
case USB_ID(0x2a39, 0x3fd4): /* RME */
err = snd_rme_controls_create(mixer);
break;
case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
err = snd_sc1810_init_mixer(mixer);
break;
case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
err = snd_bbfpro_controls_create(mixer);
break;
case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */
err = snd_djm_controls_create(mixer, SND_DJM_250MK2_IDX);
break;
case USB_ID(0x08e4, 0x017f): /* Pioneer DJ DJM-750 */
err = snd_djm_controls_create(mixer, SND_DJM_750_IDX);
break;
case USB_ID(0x08e4, 0x0163): /* Pioneer DJ DJM-850 */
err = snd_djm_controls_create(mixer, SND_DJM_850_IDX);
break;
case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */
err = snd_djm_controls_create(mixer, SND_DJM_900NXS2_IDX);
break;
}
return err;
}
#ifdef CONFIG_PM
void snd_usb_mixer_resume_quirk(struct usb_mixer_interface *mixer)
{
switch (mixer->chip->usb_id) {
case USB_ID(0x0bda, 0x4014): /* Dell WD15 dock */
dell_dock_mixer_init(mixer);
break;
}
}
#endif
void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
int unitid)
{
if (!mixer->rc_cfg)
return;
/* unit ids specific to Extigy/Audigy 2 NX: */
switch (unitid) {
case 0: /* remote control */
mixer->rc_urb->dev = mixer->chip->dev;
usb_submit_urb(mixer->rc_urb, GFP_ATOMIC);
break;
case 4: /* digital in jack */
case 7: /* line in jacks */
case 19: /* speaker out jacks */
case 20: /* headphones out jack */
break;
/* live24ext: 4 = line-in jack */
case 3: /* hp-out jack (may actuate Mute) */
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3040) ||
mixer->chip->usb_id == USB_ID(0x041e, 0x3048))
snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id);
break;
default:
usb_audio_dbg(mixer->chip, "memory change in unknown unit %d\n", unitid);
break;
}
}
static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
struct usb_mixer_elem_info *cval,
struct snd_kcontrol *kctl)
{
/* Approximation using 10 ranges based on output measurement on hw v1.2.
* This seems close to the cubic mapping e.g. alsamixer uses. */
static const DECLARE_TLV_DB_RANGE(scale,
0, 1, TLV_DB_MINMAX_ITEM(-5300, -4970),
2, 5, TLV_DB_MINMAX_ITEM(-4710, -4160),
6, 7, TLV_DB_MINMAX_ITEM(-3884, -3710),
8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560),
15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324),
17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031),
20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393),
27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032),
32, 40, TLV_DB_MINMAX_ITEM(-968, -490),
41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
);
if (cval->min == 0 && cval->max == 50) {
usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk (0-50 variant)\n");
kctl->tlv.p = scale;
kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
} else if (cval->min == 0 && cval->max <= 1000) {
/* Some other clearly broken DragonFly variant.
* At least a 0..53 variant (hw v1.0) exists.
*/
usb_audio_info(mixer->chip, "ignoring too narrow dB range on a DragonFly device");
kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
}
}
void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
struct usb_mixer_elem_info *cval, int unitid,
struct snd_kcontrol *kctl)
{
switch (mixer->chip->usb_id) {
case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
if (unitid == 7 && cval->control == UAC_FU_VOLUME)
snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
break;
/* lowest playback value is muted on C-Media devices */
case USB_ID(0x0d8c, 0x000c):
case USB_ID(0x0d8c, 0x0014):
if (strstr(kctl->id.name, "Playback"))
cval->min_mute = 1;
break;
}
}