OpenCloudOS-Kernel/drivers/net/wireless/wl12xx/rx.c

220 lines
6.0 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include "wl12xx.h"
#include "acx.h"
#include "reg.h"
#include "rx.h"
#include "io.h"
static u8 wl1271_rx_get_mem_block(struct wl1271_fw_common_status *status,
u32 drv_rx_counter)
{
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
RX_MEM_BLOCK_MASK;
}
static u32 wl1271_rx_get_buf_size(struct wl1271_fw_common_status *status,
u32 drv_rx_counter)
{
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
}
static void wl1271_rx_status(struct wl1271 *wl,
struct wl1271_rx_descriptor *desc,
struct ieee80211_rx_status *status,
u8 beacon)
{
enum ieee80211_band desc_band;
memset(status, 0, sizeof(struct ieee80211_rx_status));
status->band = wl->band;
if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
desc_band = IEEE80211_BAND_2GHZ;
else
desc_band = IEEE80211_BAND_5GHZ;
status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
#ifdef CONFIG_WL12XX_HT
/* 11n support */
if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
status->flag |= RX_FLAG_HT;
#endif
status->signal = desc->rssi;
/*
* FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
* need to divide by two for now, but TI has been discussing about
* changing it. This needs to be rechecked.
*/
wl->noise = desc->rssi - (desc->snr >> 1);
status->freq = ieee80211_channel_to_frequency(desc->channel, desc_band);
if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
status->flag |= RX_FLAG_DECRYPTED;
if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
status->flag |= RX_FLAG_MMIC_ERROR;
}
}
static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
{
struct wl1271_rx_descriptor *desc;
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
u8 *buf;
u8 beacon = 0;
/*
* In PLT mode we seem to get frames and mac80211 warns about them,
* workaround this by not retrieving them at all.
*/
if (unlikely(wl->state == WL1271_STATE_PLT))
return -EINVAL;
skb = __dev_alloc_skb(length, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
return -ENOMEM;
}
buf = skb_put(skb, length);
memcpy(buf, data, length);
/* the data read starts with the descriptor */
desc = (struct wl1271_rx_descriptor *) buf;
/* now we pull the descriptor out of the buffer */
skb_pull(skb, sizeof(*desc));
hdr = (struct ieee80211_hdr *)skb->data;
if (ieee80211_is_beacon(hdr->frame_control))
beacon = 1;
wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
beacon ? "beacon" : "");
skb_trim(skb, skb->len - desc->pad_len);
ieee80211_rx_ni(wl->hw, skb);
return 0;
}
void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status)
{
struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 rx_counter;
u32 mem_block;
u32 pkt_length;
u32 pkt_offset;
while (drv_rx_counter != fw_rx_counter) {
buf_size = 0;
rx_counter = drv_rx_counter;
while (rx_counter != fw_rx_counter) {
pkt_length = wl1271_rx_get_buf_size(status, rx_counter);
if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
break;
buf_size += pkt_length;
rx_counter++;
rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
}
if (buf_size == 0) {
wl1271_warning("received empty data");
break;
}
/*
* Choose the block we want to read
* For aggregated packets, only the first memory block should
* be retrieved. The FW takes care of the rest.
*/
mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 15:33:29 +08:00
wl->rx_mem_pool_addr.addr = (mem_block << 8) +
le32_to_cpu(wl_mem_map->packet_memory_pool_start);
wl->rx_mem_pool_addr.addr_extra =
wl->rx_mem_pool_addr.addr + 4;
wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
sizeof(wl->rx_mem_pool_addr), false);
/* Read all available packets at once */
wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_size, true);
/* Split data into separate packets */
pkt_offset = 0;
while (pkt_offset < buf_size) {
pkt_length = wl1271_rx_get_buf_size(status,
drv_rx_counter);
/*
* the handle data call can only fail in memory-outage
* conditions, in that case the received frame will just
* be dropped.
*/
wl1271_rx_handle_data(wl,
wl->aggr_buf + pkt_offset,
pkt_length);
wl->rx_counter++;
drv_rx_counter++;
drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
pkt_offset += pkt_length;
}
}
/*
* Write the driver's packet counter to the FW. This is only required
* for older hardware revisions
*/
if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
}
void wl1271_set_default_filters(struct wl1271 *wl)
{
if (wl->bss_type == BSS_TYPE_AP_BSS) {
wl->rx_config = WL1271_DEFAULT_AP_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_AP_RX_FILTER;
} else {
wl->rx_config = WL1271_DEFAULT_STA_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_STA_RX_FILTER;
}
}