OpenCloudOS-Kernel/arch/x86/kernel/signal.c

881 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-2002 x86-64 support by Andi Kleen
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/uaccess.h>
#include <linux/user-return-notifier.h>
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/i387.h>
#include <asm/vdso.h>
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-29 01:07:31 +08:00
#include <asm/mce.h>
#ifdef CONFIG_X86_64
#include <asm/proto.h>
#include <asm/ia32_unistd.h>
#endif /* CONFIG_X86_64 */
#include <asm/syscall.h>
#include <asm/syscalls.h>
#include <asm/sigframe.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
#define __FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | \
X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
X86_EFLAGS_CF)
#ifdef CONFIG_X86_32
# define FIX_EFLAGS (__FIX_EFLAGS | X86_EFLAGS_RF)
#else
# define FIX_EFLAGS __FIX_EFLAGS
#endif
#define COPY(x) do { \
get_user_ex(regs->x, &sc->x); \
} while (0)
#define GET_SEG(seg) ({ \
unsigned short tmp; \
get_user_ex(tmp, &sc->seg); \
tmp; \
})
#define COPY_SEG(seg) do { \
regs->seg = GET_SEG(seg); \
} while (0)
#define COPY_SEG_CPL3(seg) do { \
regs->seg = GET_SEG(seg) | 3; \
} while (0)
static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
unsigned long *pax)
{
void __user *buf;
unsigned int tmpflags;
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
get_user_try {
#ifdef CONFIG_X86_32
set_user_gs(regs, GET_SEG(gs));
COPY_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
#endif /* CONFIG_X86_32 */
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip);
#ifdef CONFIG_X86_64
COPY(r8);
COPY(r9);
COPY(r10);
COPY(r11);
COPY(r12);
COPY(r13);
COPY(r14);
COPY(r15);
#endif /* CONFIG_X86_64 */
#ifdef CONFIG_X86_32
COPY_SEG_CPL3(cs);
COPY_SEG_CPL3(ss);
#else /* !CONFIG_X86_32 */
/* Kernel saves and restores only the CS segment register on signals,
* which is the bare minimum needed to allow mixed 32/64-bit code.
* App's signal handler can save/restore other segments if needed. */
COPY_SEG_CPL3(cs);
#endif /* CONFIG_X86_32 */
get_user_ex(tmpflags, &sc->flags);
regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
regs->orig_ax = -1; /* disable syscall checks */
get_user_ex(buf, &sc->fpstate);
err |= restore_i387_xstate(buf);
get_user_ex(*pax, &sc->ax);
} get_user_catch(err);
return err;
}
static int
setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
struct pt_regs *regs, unsigned long mask)
{
int err = 0;
put_user_try {
#ifdef CONFIG_X86_32
put_user_ex(get_user_gs(regs), (unsigned int __user *)&sc->gs);
put_user_ex(regs->fs, (unsigned int __user *)&sc->fs);
put_user_ex(regs->es, (unsigned int __user *)&sc->es);
put_user_ex(regs->ds, (unsigned int __user *)&sc->ds);
#endif /* CONFIG_X86_32 */
put_user_ex(regs->di, &sc->di);
put_user_ex(regs->si, &sc->si);
put_user_ex(regs->bp, &sc->bp);
put_user_ex(regs->sp, &sc->sp);
put_user_ex(regs->bx, &sc->bx);
put_user_ex(regs->dx, &sc->dx);
put_user_ex(regs->cx, &sc->cx);
put_user_ex(regs->ax, &sc->ax);
#ifdef CONFIG_X86_64
put_user_ex(regs->r8, &sc->r8);
put_user_ex(regs->r9, &sc->r9);
put_user_ex(regs->r10, &sc->r10);
put_user_ex(regs->r11, &sc->r11);
put_user_ex(regs->r12, &sc->r12);
put_user_ex(regs->r13, &sc->r13);
put_user_ex(regs->r14, &sc->r14);
put_user_ex(regs->r15, &sc->r15);
#endif /* CONFIG_X86_64 */
put_user_ex(current->thread.trap_no, &sc->trapno);
put_user_ex(current->thread.error_code, &sc->err);
put_user_ex(regs->ip, &sc->ip);
#ifdef CONFIG_X86_32
put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->sp, &sc->sp_at_signal);
put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
#else /* !CONFIG_X86_32 */
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->cs, &sc->cs);
put_user_ex(0, &sc->gs);
put_user_ex(0, &sc->fs);
#endif /* CONFIG_X86_32 */
put_user_ex(fpstate, &sc->fpstate);
/* non-iBCS2 extensions.. */
put_user_ex(mask, &sc->oldmask);
put_user_ex(current->thread.cr2, &sc->cr2);
} put_user_catch(err);
return err;
}
/*
* Set up a signal frame.
*/
/*
* Determine which stack to use..
*/
static unsigned long align_sigframe(unsigned long sp)
{
#ifdef CONFIG_X86_32
/*
* Align the stack pointer according to the i386 ABI,
* i.e. so that on function entry ((sp + 4) & 15) == 0.
*/
sp = ((sp + 4) & -16ul) - 4;
#else /* !CONFIG_X86_32 */
sp = round_down(sp, 16) - 8;
#endif
return sp;
}
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
void __user **fpstate)
{
/* Default to using normal stack */
unsigned long sp = regs->sp;
int onsigstack = on_sig_stack(sp);
#ifdef CONFIG_X86_64
/* redzone */
sp -= 128;
#endif /* CONFIG_X86_64 */
if (!onsigstack) {
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (current->sas_ss_size)
sp = current->sas_ss_sp + current->sas_ss_size;
} else {
#ifdef CONFIG_X86_32
/* This is the legacy signal stack switching. */
if ((regs->ss & 0xffff) != __USER_DS &&
!(ka->sa.sa_flags & SA_RESTORER) &&
ka->sa.sa_restorer)
sp = (unsigned long) ka->sa.sa_restorer;
#endif /* CONFIG_X86_32 */
}
}
if (used_math()) {
sp -= sig_xstate_size;
#ifdef CONFIG_X86_64
sp = round_down(sp, 64);
#endif /* CONFIG_X86_64 */
*fpstate = (void __user *)sp;
}
sp = align_sigframe(sp - frame_size);
/*
* If we are on the alternate signal stack and would overflow it, don't.
* Return an always-bogus address instead so we will die with SIGSEGV.
*/
if (onsigstack && !likely(on_sig_stack(sp)))
return (void __user *)-1L;
/* save i387 state */
if (used_math() && save_i387_xstate(*fpstate) < 0)
return (void __user *)-1L;
return (void __user *)sp;
}
#ifdef CONFIG_X86_32
static const struct {
u16 poplmovl;
u32 val;
u16 int80;
} __attribute__((packed)) retcode = {
0xb858, /* popl %eax; movl $..., %eax */
__NR_sigreturn,
0x80cd, /* int $0x80 */
};
static const struct {
u8 movl;
u32 val;
u16 int80;
u8 pad;
} __attribute__((packed)) rt_retcode = {
0xb8, /* movl $..., %eax */
__NR_rt_sigreturn,
0x80cd, /* int $0x80 */
0
};
static int
__setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
struct pt_regs *regs)
{
struct sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (__put_user(sig, &frame->sig))
return -EFAULT;
if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
return -EFAULT;
if (_NSIG_WORDS > 1) {
if (__copy_to_user(&frame->extramask, &set->sig[1],
sizeof(frame->extramask)))
return -EFAULT;
}
if (current->mm->context.vdso)
restorer = VDSO32_SYMBOL(current->mm->context.vdso, sigreturn);
else
restorer = &frame->retcode;
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* Set up to return from userspace. */
err |= __put_user(restorer, &frame->pretcode);
/*
* This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(*((u64 *)&retcode), (u64 *)frame->retcode);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ka->sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = 0;
regs->cx = 0;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return 0;
}
static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
put_user_try {
put_user_ex(sig, &frame->sig);
put_user_ex(&frame->info, &frame->pinfo);
put_user_ex(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
/* Create the ucontext. */
if (cpu_has_xsave)
put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
put_user_ex(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. */
restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
put_user_ex(restorer, &frame->pretcode);
/*
* This is movl $__NR_rt_sigreturn, %ax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
put_user_ex(*((u64 *)&rt_retcode), (u64 *)frame->retcode);
} put_user_catch(err);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ka->sa.sa_handler;
regs->ax = (unsigned long)sig;
regs->dx = (unsigned long)&frame->info;
regs->cx = (unsigned long)&frame->uc;
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
regs->cs = __USER_CS;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return 0;
}
#else /* !CONFIG_X86_32 */
static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *fp = NULL;
int err = 0;
struct task_struct *me = current;
frame = get_sigframe(ka, regs, sizeof(struct rt_sigframe), &fp);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return -EFAULT;
if (ka->sa.sa_flags & SA_SIGINFO) {
if (copy_siginfo_to_user(&frame->info, info))
return -EFAULT;
}
put_user_try {
/* Create the ucontext. */
if (cpu_has_xsave)
put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
put_user_ex(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
put_user_ex(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
put_user_ex(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* x86-64 should always use SA_RESTORER. */
if (ka->sa.sa_flags & SA_RESTORER) {
put_user_ex(ka->sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
err |= -EFAULT;
}
} put_user_catch(err);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->di = sig;
/* In case the signal handler was declared without prototypes */
regs->ax = 0;
/* This also works for non SA_SIGINFO handlers because they expect the
next argument after the signal number on the stack. */
regs->si = (unsigned long)&frame->info;
regs->dx = (unsigned long)&frame->uc;
regs->ip = (unsigned long) ka->sa.sa_handler;
regs->sp = (unsigned long)frame;
/* Set up the CS register to run signal handlers in 64-bit mode,
even if the handler happens to be interrupting 32-bit code. */
regs->cs = __USER_CS;
return 0;
}
#endif /* CONFIG_X86_32 */
#ifdef CONFIG_X86_32
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
sys_sigsuspend(int history0, int history1, old_sigset_t mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
schedule();
set_restore_sigmask();
return -ERESTARTNOHAND;
}
asmlinkage int
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact)
{
struct k_sigaction new_ka, old_ka;
int ret = 0;
if (act) {
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)))
return -EFAULT;
get_user_try {
get_user_ex(new_ka.sa.sa_handler, &act->sa_handler);
get_user_ex(new_ka.sa.sa_flags, &act->sa_flags);
get_user_ex(mask, &act->sa_mask);
get_user_ex(new_ka.sa.sa_restorer, &act->sa_restorer);
} get_user_catch(ret);
if (ret)
return -EFAULT;
siginitset(&new_ka.sa.sa_mask, mask);
}
ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
return -EFAULT;
put_user_try {
put_user_ex(old_ka.sa.sa_handler, &oact->sa_handler);
put_user_ex(old_ka.sa.sa_flags, &oact->sa_flags);
put_user_ex(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
put_user_ex(old_ka.sa.sa_restorer, &oact->sa_restorer);
} put_user_catch(ret);
if (ret)
return -EFAULT;
}
return ret;
}
#endif /* CONFIG_X86_32 */
long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
return do_sigaltstack(uss, uoss, regs->sp);
}
/*
* Do a signal return; undo the signal stack.
*/
#ifdef CONFIG_X86_32
unsigned long sys_sigreturn(struct pt_regs *regs)
{
struct sigframe __user *frame;
unsigned long ax;
sigset_t set;
frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
&& __copy_from_user(&set.sig[1], &frame->extramask,
sizeof(frame->extramask))))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->sc, &ax))
goto badframe;
return ax;
badframe:
signal_fault(regs, frame, "sigreturn");
return 0;
}
#endif /* CONFIG_X86_32 */
long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long ax;
sigset_t set;
frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
return ax;
badframe:
signal_fault(regs, frame, "rt_sigreturn");
return 0;
}
/*
* OK, we're invoking a handler:
*/
static int signr_convert(int sig)
{
#ifdef CONFIG_X86_32
struct thread_info *info = current_thread_info();
if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32)
return info->exec_domain->signal_invmap[sig];
#endif /* CONFIG_X86_32 */
return sig;
}
#ifdef CONFIG_X86_32
#define is_ia32 1
#define ia32_setup_frame __setup_frame
#define ia32_setup_rt_frame __setup_rt_frame
#else /* !CONFIG_X86_32 */
#ifdef CONFIG_IA32_EMULATION
#define is_ia32 test_thread_flag(TIF_IA32)
#else /* !CONFIG_IA32_EMULATION */
#define is_ia32 0
#endif /* CONFIG_IA32_EMULATION */
int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs);
int ia32_setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs *regs);
#endif /* CONFIG_X86_32 */
static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
int usig = signr_convert(sig);
int ret;
/* Set up the stack frame */
if (is_ia32) {
if (ka->sa.sa_flags & SA_SIGINFO)
ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
else
ret = ia32_setup_frame(usig, ka, set, regs);
} else
ret = __setup_rt_frame(sig, ka, info, set, regs);
if (ret) {
force_sigsegv(sig, current);
return -EFAULT;
}
return ret;
}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
{
int ret;
/* Are we from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* If so, check system call restarting.. */
switch (syscall_get_error(current, regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
}
}
/*
* If TF is set due to a debugger (TIF_FORCED_TF), clear the TF
* flag so that register information in the sigcontext is correct.
*/
if (unlikely(regs->flags & X86_EFLAGS_TF) &&
likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->flags &= ~X86_EFLAGS_TF;
ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret)
return ret;
#ifdef CONFIG_X86_64
/*
* This has nothing to do with segment registers,
* despite the name. This magic affects uaccess.h
* macros' behavior. Reset it to the normal setting.
*/
set_fs(USER_DS);
#endif
/*
* Clear the direction flag as per the ABI for function entry.
*/
regs->flags &= ~X86_EFLAGS_DF;
/*
* Clear TF when entering the signal handler, but
* notify any tracer that was single-stepping it.
* The tracer may want to single-step inside the
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
tracehook_signal_handler(sig, info, ka, regs,
test_thread_flag(TIF_SINGLESTEP));
return 0;
}
#ifdef CONFIG_X86_32
#define NR_restart_syscall __NR_restart_syscall
#else /* !CONFIG_X86_32 */
#define NR_restart_syscall \
test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
#endif /* CONFIG_X86_32 */
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
static void do_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
sigset_t *oldset;
/*
* We want the common case to go fast, which is why we may in certain
* cases get here from kernel mode. Just return without doing anything
* if so.
* X86_32: vm86 regs switched out by assembly code before reaching
* here, so testing against kernel CS suffices.
*/
if (!user_mode(regs))
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
return;
if (current_thread_info()->status & TS_RESTORE_SIGMASK)
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TS_RESTORE_SIGMASK flag.
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
}
return;
}
/* Did we come from a system call? */
if (syscall_get_nr(current, regs) >= 0) {
/* Restart the system call - no handlers present */
switch (syscall_get_error(current, regs)) {
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->ax = regs->orig_ax;
regs->ip -= 2;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
break;
case -ERESTART_RESTARTBLOCK:
regs->ax = NR_restart_syscall;
regs->ip -= 2;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
break;
}
}
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
/*
* If there's no signal to deliver, we just put the saved sigmask
* back.
*/
if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
/*
* notification of userspace execution resumption
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
* - triggered by the TIF_WORK_MASK flags
*/
void
do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
#ifdef CONFIG_X86_MCE
/* notify userspace of pending MCEs */
if (thread_info_flags & _TIF_MCE_NOTIFY)
x86, mce: support action-optional machine checks Newer Intel CPUs support a new class of machine checks called recoverable action optional. Action Optional means that the CPU detected some form of corruption in the background and tells the OS about using a machine check exception. The OS can then take appropiate action, like killing the process with the corrupted data or logging the event properly to disk. This is done by the new generic high level memory failure handler added in a earlier patch. The high level handler takes the address with the failed memory and does the appropiate action, like killing the process. In this version of the patch the high level handler is stubbed out with a weak function to not create a direct dependency on the hwpoison branch. The high level handler cannot be directly called from the machine check exception though, because it has to run in a defined process context to be able to sleep when taking VM locks (it is not expected to sleep for a long time, just do so in some exceptional cases like lock contention) Thus the MCE handler has to queue a work item for process context, trigger process context and then call the high level handler from there. This patch adds two path to process context: through a per thread kernel exit notify_user() callback or through a high priority work item. The first runs when the process exits back to user space, the other when it goes to sleep and there is no higher priority process. The machine check handler will schedule both, and whoever runs first will grab the event. This is done because quick reaction to this event is critical to avoid a potential more fatal machine check when the corruption is consumed. There is a simple lock less ring buffer to queue the corrupted addresses between the exception handler and the process context handler. Then in process context it just calls the high level VM code with the corrupted PFNs. The code adds the required code to extract the failed address from the CPU's machine check registers. It doesn't try to handle all possible cases -- the specification has 6 different ways to specify memory address -- but only the linear address. Most of the required checking has been already done earlier in the mce_severity rule checking engine. Following the Intel recommendations Action Optional errors are only enabled for known situations (encoded in MCACODs). The errors are ignored otherwise, because they are action optional. v2: Improve comment, disable preemption while processing ring buffer (reported by Ying Huang) Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-28 03:56:59 +08:00
mce_notify_process();
#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
[PATCH] Handle TIF_RESTORE_SIGMASK for i386 Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:44:00 +08:00
do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6] Add a keyctl to install a process's session keyring onto its parent. This replaces the parent's session keyring. Because the COW credential code does not permit one process to change another process's credentials directly, the change is deferred until userspace next starts executing again. Normally this will be after a wait*() syscall. To support this, three new security hooks have been provided: cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in the blank security creds and key_session_to_parent() - which asks the LSM if the process may replace its parent's session keyring. The replacement may only happen if the process has the same ownership details as its parent, and the process has LINK permission on the session keyring, and the session keyring is owned by the process, and the LSM permits it. Note that this requires alteration to each architecture's notify_resume path. This has been done for all arches barring blackfin, m68k* and xtensa, all of which need assembly alteration to support TIF_NOTIFY_RESUME. This allows the replacement to be performed at the point the parent process resumes userspace execution. This allows the userspace AFS pioctl emulation to fully emulate newpag() and the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to alter the parent process's PAG membership. However, since kAFS doesn't use PAGs per se, but rather dumps the keys into the session keyring, the session keyring of the parent must be replaced if, for example, VIOCSETTOK is passed the newpag flag. This can be tested with the following program: #include <stdio.h> #include <stdlib.h> #include <keyutils.h> #define KEYCTL_SESSION_TO_PARENT 18 #define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0) int main(int argc, char **argv) { key_serial_t keyring, key; long ret; keyring = keyctl_join_session_keyring(argv[1]); OSERROR(keyring, "keyctl_join_session_keyring"); key = add_key("user", "a", "b", 1, keyring); OSERROR(key, "add_key"); ret = keyctl(KEYCTL_SESSION_TO_PARENT); OSERROR(ret, "KEYCTL_SESSION_TO_PARENT"); return 0; } Compiled and linked with -lkeyutils, you should see something like: [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 355907932 --alswrv 4043 -1 \_ keyring: _uid.4043 [dhowells@andromeda ~]$ /tmp/newpag [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: _ses 1055658746 --alswrv 4043 4043 \_ user: a [dhowells@andromeda ~]$ /tmp/newpag hello [dhowells@andromeda ~]$ keyctl show Session Keyring -3 --alswrv 4043 4043 keyring: hello 340417692 --alswrv 4043 4043 \_ user: a Where the test program creates a new session keyring, sticks a user key named 'a' into it and then installs it on its parent. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 16:14:21 +08:00
if (current->replacement_session_keyring)
key_replace_session_keyring();
}
if (thread_info_flags & _TIF_USER_RETURN_NOTIFY)
fire_user_return_notifiers();
#ifdef CONFIG_X86_32
clear_thread_flag(TIF_IRET);
#endif /* CONFIG_X86_32 */
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
{
struct task_struct *me = current;
if (show_unhandled_signals && printk_ratelimit()) {
printk("%s"
"%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
printk(KERN_CONT "\n");
}
force_sig(SIGSEGV, me);
}