OpenCloudOS-Kernel/net/x25/af_x25.c

1849 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* X.25 Packet Layer release 002
*
* This is ALPHA test software. This code may break your machine,
* randomly fail to work with new releases, misbehave and/or generally
* screw up. It might even work.
*
* This code REQUIRES 2.1.15 or higher
*
* History
* X.25 001 Jonathan Naylor Started coding.
* X.25 002 Jonathan Naylor Centralised disconnect handling.
* New timer architecture.
* 2000-03-11 Henner Eisen MSG_EOR handling more POSIX compliant.
* 2000-03-22 Daniela Squassoni Allowed disabling/enabling of
* facilities negotiation and increased
* the throughput upper limit.
* 2000-08-27 Arnaldo C. Melo s/suser/capable/ + micro cleanups
* 2000-09-04 Henner Eisen Set sock->state in x25_accept().
* Fixed x25_output() related skb leakage.
* 2000-10-02 Henner Eisen Made x25_kick() single threaded per socket.
* 2000-10-27 Henner Eisen MSG_DONTWAIT for fragment allocation.
* 2000-11-14 Henner Eisen Closing datalink from NETDEV_GOING_DOWN
* 2002-10-06 Arnaldo C. Melo Get rid of cli/sti, move proc stuff to
* x25_proc.c, using seq_file
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
* 2005-04-02 Shaun Pereira Selective sub address matching
* with call user data
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:16:17 +08:00
* 2005-04-15 Shaun Pereira Fast select with no restriction on
* response
*/
#define pr_fmt(fmt) "X25: " fmt
#include <linux/module.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched/signal.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <linux/uaccess.h>
#include <linux/fcntl.h>
#include <linux/termios.h> /* For TIOCINQ/OUTQ */
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/compat.h>
#include <linux/ctype.h>
#include <net/x25.h>
#include <net/compat.h>
int sysctl_x25_restart_request_timeout = X25_DEFAULT_T20;
int sysctl_x25_call_request_timeout = X25_DEFAULT_T21;
int sysctl_x25_reset_request_timeout = X25_DEFAULT_T22;
int sysctl_x25_clear_request_timeout = X25_DEFAULT_T23;
int sysctl_x25_ack_holdback_timeout = X25_DEFAULT_T2;
int sysctl_x25_forward = 0;
HLIST_HEAD(x25_list);
DEFINE_RWLOCK(x25_list_lock);
static const struct proto_ops x25_proto_ops;
static const struct x25_address null_x25_address = {" "};
#ifdef CONFIG_COMPAT
struct compat_x25_subscrip_struct {
char device[200-sizeof(compat_ulong_t)];
compat_ulong_t global_facil_mask;
compat_uint_t extended;
};
#endif
int x25_parse_address_block(struct sk_buff *skb,
struct x25_address *called_addr,
struct x25_address *calling_addr)
{
unsigned char len;
int needed;
int rc;
if (!pskb_may_pull(skb, 1)) {
/* packet has no address block */
rc = 0;
goto empty;
}
len = *skb->data;
needed = 1 + ((len >> 4) + (len & 0x0f) + 1) / 2;
if (!pskb_may_pull(skb, needed)) {
/* packet is too short to hold the addresses it claims
to hold */
rc = -1;
goto empty;
}
return x25_addr_ntoa(skb->data, called_addr, calling_addr);
empty:
*called_addr->x25_addr = 0;
*calling_addr->x25_addr = 0;
return rc;
}
int x25_addr_ntoa(unsigned char *p, struct x25_address *called_addr,
struct x25_address *calling_addr)
{
unsigned int called_len, calling_len;
char *called, *calling;
unsigned int i;
called_len = (*p >> 0) & 0x0F;
calling_len = (*p >> 4) & 0x0F;
called = called_addr->x25_addr;
calling = calling_addr->x25_addr;
p++;
for (i = 0; i < (called_len + calling_len); i++) {
if (i < called_len) {
if (i % 2 != 0) {
*called++ = ((*p >> 0) & 0x0F) + '0';
p++;
} else {
*called++ = ((*p >> 4) & 0x0F) + '0';
}
} else {
if (i % 2 != 0) {
*calling++ = ((*p >> 0) & 0x0F) + '0';
p++;
} else {
*calling++ = ((*p >> 4) & 0x0F) + '0';
}
}
}
*called = *calling = '\0';
return 1 + (called_len + calling_len + 1) / 2;
}
int x25_addr_aton(unsigned char *p, struct x25_address *called_addr,
struct x25_address *calling_addr)
{
unsigned int called_len, calling_len;
char *called, *calling;
int i;
called = called_addr->x25_addr;
calling = calling_addr->x25_addr;
called_len = strlen(called);
calling_len = strlen(calling);
*p++ = (calling_len << 4) | (called_len << 0);
for (i = 0; i < (called_len + calling_len); i++) {
if (i < called_len) {
if (i % 2 != 0) {
*p |= (*called++ - '0') << 0;
p++;
} else {
*p = 0x00;
*p |= (*called++ - '0') << 4;
}
} else {
if (i % 2 != 0) {
*p |= (*calling++ - '0') << 0;
p++;
} else {
*p = 0x00;
*p |= (*calling++ - '0') << 4;
}
}
}
return 1 + (called_len + calling_len + 1) / 2;
}
/*
* Socket removal during an interrupt is now safe.
*/
static void x25_remove_socket(struct sock *sk)
{
write_lock_bh(&x25_list_lock);
sk_del_node_init(sk);
write_unlock_bh(&x25_list_lock);
}
/*
* Kill all bound sockets on a dropped device.
*/
static void x25_kill_by_device(struct net_device *dev)
{
struct sock *s;
write_lock_bh(&x25_list_lock);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each(s, &x25_list)
if (x25_sk(s)->neighbour && x25_sk(s)->neighbour->dev == dev)
x25_disconnect(s, ENETUNREACH, 0, 0);
write_unlock_bh(&x25_list_lock);
}
/*
* Handle device status changes.
*/
static int x25_device_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct x25_neigh *nb;
if (!net_eq(dev_net(dev), &init_net))
return NOTIFY_DONE;
if (dev->type == ARPHRD_X25
#if IS_ENABLED(CONFIG_LLC)
|| dev->type == ARPHRD_ETHER
#endif
) {
switch (event) {
case NETDEV_UP:
x25_link_device_up(dev);
break;
case NETDEV_GOING_DOWN:
nb = x25_get_neigh(dev);
if (nb) {
x25_terminate_link(nb);
x25_neigh_put(nb);
}
break;
case NETDEV_DOWN:
x25_kill_by_device(dev);
x25_route_device_down(dev);
x25_link_device_down(dev);
break;
}
}
return NOTIFY_DONE;
}
/*
* Add a socket to the bound sockets list.
*/
static void x25_insert_socket(struct sock *sk)
{
write_lock_bh(&x25_list_lock);
sk_add_node(sk, &x25_list);
write_unlock_bh(&x25_list_lock);
}
/*
* Find a socket that wants to accept the Call Request we just
* received. Check the full list for an address/cud match.
* If no cuds match return the next_best thing, an address match.
* Note: if a listening socket has cud set it must only get calls
* with matching cud.
*/
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
static struct sock *x25_find_listener(struct x25_address *addr,
struct sk_buff *skb)
{
struct sock *s;
struct sock *next_best;
read_lock_bh(&x25_list_lock);
next_best = NULL;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each(s, &x25_list)
if ((!strcmp(addr->x25_addr,
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
x25_sk(s)->source_addr.x25_addr) ||
!strcmp(x25_sk(s)->source_addr.x25_addr,
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
null_x25_address.x25_addr)) &&
s->sk_state == TCP_LISTEN) {
/*
* Found a listening socket, now check the incoming
* call user data vs this sockets call user data
*/
if (x25_sk(s)->cudmatchlength > 0 &&
skb->len >= x25_sk(s)->cudmatchlength) {
if((memcmp(x25_sk(s)->calluserdata.cuddata,
skb->data,
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
x25_sk(s)->cudmatchlength)) == 0) {
sock_hold(s);
goto found;
}
} else
next_best = s;
}
if (next_best) {
s = next_best;
sock_hold(s);
goto found;
}
s = NULL;
found:
read_unlock_bh(&x25_list_lock);
return s;
}
/*
* Find a connected X.25 socket given my LCI and neighbour.
*/
static struct sock *__x25_find_socket(unsigned int lci, struct x25_neigh *nb)
{
struct sock *s;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each(s, &x25_list)
if (x25_sk(s)->lci == lci && x25_sk(s)->neighbour == nb) {
sock_hold(s);
goto found;
}
s = NULL;
found:
return s;
}
struct sock *x25_find_socket(unsigned int lci, struct x25_neigh *nb)
{
struct sock *s;
read_lock_bh(&x25_list_lock);
s = __x25_find_socket(lci, nb);
read_unlock_bh(&x25_list_lock);
return s;
}
/*
* Find a unique LCI for a given device.
*/
static unsigned int x25_new_lci(struct x25_neigh *nb)
{
unsigned int lci = 1;
struct sock *sk;
net/x25: do not hold the cpu too long in x25_new_lci() Due to quadratic behavior of x25_new_lci(), syzbot was able to trigger an rcu stall. Fix this by not blocking BH for the whole duration of the function, and inserting a reschedule point when possible. If we care enough, using a bitmap could get rid of the quadratic behavior. syzbot report : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0 rcu: (t=10501 jiffies g=383105 q=136) rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: RCU grace-period kthread stack dump: rcu_preempt I28928 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2844 [inline] __schedule+0x817/0x1cc0 kernel/sched/core.c:3485 schedule+0x92/0x180 kernel/sched/core.c:3529 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline] rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211 print_cpu_stall kernel/rcu/tree.c:1348 [inline] check_cpu_stall kernel/rcu/tree.c:1422 [inline] rcu_pending kernel/rcu/tree.c:3018 [inline] rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86 Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00 RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0 RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003 queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:705 __sys_bind+0x23f/0x290 net/socket.c:1505 __do_sys_bind net/socket.c:1516 [inline] __se_sys_bind net/socket.c:1514 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1514 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4 R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328 Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74 RSP: 0018:ffff8880639efc58 EFLAGS: 00000246 RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000 RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628 RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0 R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000 FS: 00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_new_lci net/x25/af_x25.c:357 [inline] x25_connect+0x374/0xdf0 net/x25/af_x25.c:786 __sys_connect+0x266/0x330 net/socket.c:1686 __do_sys_connect net/socket.c:1697 [inline] __se_sys_connect net/socket.c:1694 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1694 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4 R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09 04:41:05 +08:00
while ((sk = x25_find_socket(lci, nb)) != NULL) {
sock_put(sk);
if (++lci == 4096) {
lci = 0;
break;
}
net/x25: do not hold the cpu too long in x25_new_lci() Due to quadratic behavior of x25_new_lci(), syzbot was able to trigger an rcu stall. Fix this by not blocking BH for the whole duration of the function, and inserting a reschedule point when possible. If we care enough, using a bitmap could get rid of the quadratic behavior. syzbot report : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0 rcu: (t=10501 jiffies g=383105 q=136) rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: RCU grace-period kthread stack dump: rcu_preempt I28928 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2844 [inline] __schedule+0x817/0x1cc0 kernel/sched/core.c:3485 schedule+0x92/0x180 kernel/sched/core.c:3529 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline] rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211 print_cpu_stall kernel/rcu/tree.c:1348 [inline] check_cpu_stall kernel/rcu/tree.c:1422 [inline] rcu_pending kernel/rcu/tree.c:3018 [inline] rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86 Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00 RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0 RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003 queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:705 __sys_bind+0x23f/0x290 net/socket.c:1505 __do_sys_bind net/socket.c:1516 [inline] __se_sys_bind net/socket.c:1514 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1514 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4 R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328 Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74 RSP: 0018:ffff8880639efc58 EFLAGS: 00000246 RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000 RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628 RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0 R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000 FS: 00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_new_lci net/x25/af_x25.c:357 [inline] x25_connect+0x374/0xdf0 net/x25/af_x25.c:786 __sys_connect+0x266/0x330 net/socket.c:1686 __do_sys_connect net/socket.c:1697 [inline] __se_sys_connect net/socket.c:1694 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1694 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4 R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09 04:41:05 +08:00
cond_resched();
}
return lci;
}
/*
* Deferred destroy.
*/
static void __x25_destroy_socket(struct sock *);
/*
* handler for deferred kills.
*/
static void x25_destroy_timer(struct timer_list *t)
{
struct sock *sk = from_timer(sk, t, sk_timer);
x25_destroy_socket_from_timer(sk);
}
/*
* This is called from user mode and the timers. Thus it protects itself
* against interrupt users but doesn't worry about being called during
* work. Once it is removed from the queue no interrupt or bottom half
* will touch it and we are (fairly 8-) ) safe.
* Not static as it's used by the timer
*/
static void __x25_destroy_socket(struct sock *sk)
{
struct sk_buff *skb;
x25_stop_heartbeat(sk);
x25_stop_timer(sk);
x25_remove_socket(sk);
x25_clear_queues(sk); /* Flush the queues */
while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
if (skb->sk != sk) { /* A pending connection */
/*
* Queue the unaccepted socket for death
*/
skb->sk->sk_state = TCP_LISTEN;
sock_set_flag(skb->sk, SOCK_DEAD);
x25_start_heartbeat(skb->sk);
x25_sk(skb->sk)->state = X25_STATE_0;
}
kfree_skb(skb);
}
if (sk_has_allocations(sk)) {
/* Defer: outstanding buffers */
sk->sk_timer.expires = jiffies + 10 * HZ;
sk->sk_timer.function = x25_destroy_timer;
add_timer(&sk->sk_timer);
} else {
/* drop last reference so sock_put will free */
__sock_put(sk);
}
}
void x25_destroy_socket_from_timer(struct sock *sk)
{
sock_hold(sk);
bh_lock_sock(sk);
__x25_destroy_socket(sk);
bh_unlock_sock(sk);
sock_put(sk);
}
/*
* Handling for system calls applied via the various interfaces to a
* X.25 socket object.
*/
static int x25_setsockopt(struct socket *sock, int level, int optname,
sockptr_t optval, unsigned int optlen)
{
int opt;
struct sock *sk = sock->sk;
int rc = -ENOPROTOOPT;
if (level != SOL_X25 || optname != X25_QBITINCL)
goto out;
rc = -EINVAL;
if (optlen < sizeof(int))
goto out;
rc = -EFAULT;
if (copy_from_sockptr(&opt, optval, sizeof(int)))
goto out;
if (opt)
set_bit(X25_Q_BIT_FLAG, &x25_sk(sk)->flags);
else
clear_bit(X25_Q_BIT_FLAG, &x25_sk(sk)->flags);
rc = 0;
out:
return rc;
}
static int x25_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
struct sock *sk = sock->sk;
int val, len, rc = -ENOPROTOOPT;
if (level != SOL_X25 || optname != X25_QBITINCL)
goto out;
rc = -EFAULT;
if (get_user(len, optlen))
goto out;
len = min_t(unsigned int, len, sizeof(int));
rc = -EINVAL;
if (len < 0)
goto out;
rc = -EFAULT;
if (put_user(len, optlen))
goto out;
val = test_bit(X25_Q_BIT_FLAG, &x25_sk(sk)->flags);
rc = copy_to_user(optval, &val, len) ? -EFAULT : 0;
out:
return rc;
}
static int x25_listen(struct socket *sock, int backlog)
{
struct sock *sk = sock->sk;
int rc = -EOPNOTSUPP;
lock_sock(sk);
if (sk->sk_state != TCP_LISTEN) {
memset(&x25_sk(sk)->dest_addr, 0, X25_ADDR_LEN);
sk->sk_max_ack_backlog = backlog;
sk->sk_state = TCP_LISTEN;
rc = 0;
}
release_sock(sk);
return rc;
}
static struct proto x25_proto = {
.name = "X25",
.owner = THIS_MODULE,
.obj_size = sizeof(struct x25_sock),
};
static struct sock *x25_alloc_socket(struct net *net, int kern)
{
struct x25_sock *x25;
struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto, kern);
if (!sk)
goto out;
sock_init_data(NULL, sk);
x25 = x25_sk(sk);
skb_queue_head_init(&x25->ack_queue);
skb_queue_head_init(&x25->fragment_queue);
skb_queue_head_init(&x25->interrupt_in_queue);
skb_queue_head_init(&x25->interrupt_out_queue);
out:
return sk;
}
static int x25_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
struct sock *sk;
struct x25_sock *x25;
int rc = -EAFNOSUPPORT;
if (!net_eq(net, &init_net))
goto out;
rc = -ESOCKTNOSUPPORT;
if (sock->type != SOCK_SEQPACKET)
goto out;
rc = -EINVAL;
if (protocol)
goto out;
rc = -ENOBUFS;
if ((sk = x25_alloc_socket(net, kern)) == NULL)
goto out;
x25 = x25_sk(sk);
sock_init_data(sock, sk);
x25_init_timers(sk);
sock->ops = &x25_proto_ops;
sk->sk_protocol = protocol;
sk->sk_backlog_rcv = x25_backlog_rcv;
x25->t21 = sysctl_x25_call_request_timeout;
x25->t22 = sysctl_x25_reset_request_timeout;
x25->t23 = sysctl_x25_clear_request_timeout;
x25->t2 = sysctl_x25_ack_holdback_timeout;
x25->state = X25_STATE_0;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
x25->cudmatchlength = 0;
set_bit(X25_ACCPT_APPRV_FLAG, &x25->flags); /* normally no cud */
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:16:17 +08:00
/* on call accept */
x25->facilities.winsize_in = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.winsize_out = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.pacsize_in = X25_DEFAULT_PACKET_SIZE;
x25->facilities.pacsize_out = X25_DEFAULT_PACKET_SIZE;
x25->facilities.throughput = 0; /* by default don't negotiate
throughput */
x25->facilities.reverse = X25_DEFAULT_REVERSE;
x25->dte_facilities.calling_len = 0;
x25->dte_facilities.called_len = 0;
memset(x25->dte_facilities.called_ae, '\0',
sizeof(x25->dte_facilities.called_ae));
memset(x25->dte_facilities.calling_ae, '\0',
sizeof(x25->dte_facilities.calling_ae));
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
rc = 0;
out:
return rc;
}
static struct sock *x25_make_new(struct sock *osk)
{
struct sock *sk = NULL;
struct x25_sock *x25, *ox25;
if (osk->sk_type != SOCK_SEQPACKET)
goto out;
if ((sk = x25_alloc_socket(sock_net(osk), 0)) == NULL)
goto out;
x25 = x25_sk(sk);
sk->sk_type = osk->sk_type;
sk->sk_priority = osk->sk_priority;
sk->sk_protocol = osk->sk_protocol;
sk->sk_rcvbuf = osk->sk_rcvbuf;
sk->sk_sndbuf = osk->sk_sndbuf;
sk->sk_state = TCP_ESTABLISHED;
sk->sk_backlog_rcv = osk->sk_backlog_rcv;
sock_copy_flags(sk, osk);
ox25 = x25_sk(osk);
x25->t21 = ox25->t21;
x25->t22 = ox25->t22;
x25->t23 = ox25->t23;
x25->t2 = ox25->t2;
x25->flags = ox25->flags;
x25->facilities = ox25->facilities;
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
x25->dte_facilities = ox25->dte_facilities;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
x25->cudmatchlength = ox25->cudmatchlength;
clear_bit(X25_INTERRUPT_FLAG, &x25->flags);
x25_init_timers(sk);
out:
return sk;
}
static int x25_release(struct socket *sock)
{
struct sock *sk = sock->sk;
struct x25_sock *x25;
if (!sk)
return 0;
x25 = x25_sk(sk);
sock_hold(sk);
lock_sock(sk);
switch (x25->state) {
case X25_STATE_0:
case X25_STATE_2:
x25_disconnect(sk, 0, 0, 0);
__x25_destroy_socket(sk);
goto out;
case X25_STATE_1:
case X25_STATE_3:
case X25_STATE_4:
x25_clear_queues(sk);
x25_write_internal(sk, X25_CLEAR_REQUEST);
x25_start_t23timer(sk);
x25->state = X25_STATE_2;
sk->sk_state = TCP_CLOSE;
sk->sk_shutdown |= SEND_SHUTDOWN;
sk->sk_state_change(sk);
sock_set_flag(sk, SOCK_DEAD);
sock_set_flag(sk, SOCK_DESTROY);
break;
case X25_STATE_5:
x25_write_internal(sk, X25_CLEAR_REQUEST);
x25_disconnect(sk, 0, 0, 0);
__x25_destroy_socket(sk);
goto out;
}
sock_orphan(sk);
out:
release_sock(sk);
sock_put(sk);
return 0;
}
static int x25_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
struct sock *sk = sock->sk;
struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
int len, i, rc = 0;
net/x25: fix a race in x25_bind() syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297a9bf ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 05:24:59 +08:00
if (addr_len != sizeof(struct sockaddr_x25) ||
addr->sx25_family != AF_X25) {
rc = -EINVAL;
goto out;
}
/* check for the null_x25_address */
if (strcmp(addr->sx25_addr.x25_addr, null_x25_address.x25_addr)) {
len = strlen(addr->sx25_addr.x25_addr);
for (i = 0; i < len; i++) {
if (!isdigit(addr->sx25_addr.x25_addr[i])) {
rc = -EINVAL;
goto out;
}
}
}
lock_sock(sk);
net/x25: fix a race in x25_bind() syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297a9bf ("X.25 remove bkl in bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 05:24:59 +08:00
if (sock_flag(sk, SOCK_ZAPPED)) {
x25_sk(sk)->source_addr = addr->sx25_addr;
x25_insert_socket(sk);
sock_reset_flag(sk, SOCK_ZAPPED);
} else {
rc = -EINVAL;
}
release_sock(sk);
SOCK_DEBUG(sk, "x25_bind: socket is bound\n");
out:
return rc;
}
static int x25_wait_for_connection_establishment(struct sock *sk)
{
DECLARE_WAITQUEUE(wait, current);
int rc;
add_wait_queue_exclusive(sk_sleep(sk), &wait);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
rc = -ERESTARTSYS;
if (signal_pending(current))
break;
rc = sock_error(sk);
if (rc) {
sk->sk_socket->state = SS_UNCONNECTED;
break;
}
rc = 0;
if (sk->sk_state != TCP_ESTABLISHED) {
release_sock(sk);
schedule();
lock_sock(sk);
} else
break;
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
return rc;
}
static int x25_connect(struct socket *sock, struct sockaddr *uaddr,
int addr_len, int flags)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
struct x25_route *rt;
int rc = 0;
lock_sock(sk);
if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
sock->state = SS_CONNECTED;
goto out; /* Connect completed during a ERESTARTSYS event */
}
rc = -ECONNREFUSED;
if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) {
sock->state = SS_UNCONNECTED;
goto out;
}
rc = -EISCONN; /* No reconnect on a seqpacket socket */
if (sk->sk_state == TCP_ESTABLISHED)
goto out;
rc = -EALREADY; /* Do nothing if call is already in progress */
if (sk->sk_state == TCP_SYN_SENT)
goto out;
sk->sk_state = TCP_CLOSE;
sock->state = SS_UNCONNECTED;
rc = -EINVAL;
if (addr_len != sizeof(struct sockaddr_x25) ||
addr->sx25_family != AF_X25)
goto out;
rc = -ENETUNREACH;
rt = x25_get_route(&addr->sx25_addr);
if (!rt)
goto out;
x25->neighbour = x25_get_neigh(rt->dev);
if (!x25->neighbour)
goto out_put_route;
x25_limit_facilities(&x25->facilities, x25->neighbour);
x25->lci = x25_new_lci(x25->neighbour);
if (!x25->lci)
goto out_put_neigh;
rc = -EINVAL;
if (sock_flag(sk, SOCK_ZAPPED)) /* Must bind first - autobinding does not work */
goto out_put_neigh;
if (!strcmp(x25->source_addr.x25_addr, null_x25_address.x25_addr))
memset(&x25->source_addr, '\0', X25_ADDR_LEN);
x25->dest_addr = addr->sx25_addr;
/* Move to connecting socket, start sending Connect Requests */
sock->state = SS_CONNECTING;
sk->sk_state = TCP_SYN_SENT;
x25->state = X25_STATE_1;
x25_write_internal(sk, X25_CALL_REQUEST);
x25_start_heartbeat(sk);
x25_start_t21timer(sk);
/* Now the loop */
rc = -EINPROGRESS;
if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
goto out;
rc = x25_wait_for_connection_establishment(sk);
if (rc)
goto out_put_neigh;
sock->state = SS_CONNECTED;
rc = 0;
out_put_neigh:
net/x25: fix use-after-free in x25_device_event() In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11 00:07:14 +08:00
if (rc) {
read_lock_bh(&x25_list_lock);
x25_neigh_put(x25->neighbour);
net/x25: fix use-after-free in x25_device_event() In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11 00:07:14 +08:00
x25->neighbour = NULL;
read_unlock_bh(&x25_list_lock);
net/x25: reset state in x25_connect() In case x25_connect() fails and frees the socket neighbour, we also need to undo the change done to x25->state. Before my last bug fix, we had use-after-free so this patch fixes a latent bug. syzbot report : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173 Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f RSP: 0018:ffff888076717a08 EFLAGS: 00010207 RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000 kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840 kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5' R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013 FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_release+0xd0/0x340 net/x25/af_x25.c:658 __sock_release+0xd3/0x2b0 net/socket.c:579 sock_close+0x1b/0x30 net/socket.c:1162 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 get_signal+0x1961/0x1d50 kernel/signal.c:2388 do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816 exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4 R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff Modules linked in: Fixes: 95d6ebd53c79 ("net/x25: fix use-after-free in x25_device_event()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12 04:48:44 +08:00
x25->state = X25_STATE_0;
net/x25: fix use-after-free in x25_device_event() In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11 00:07:14 +08:00
}
out_put_route:
x25_route_put(rt);
out:
release_sock(sk);
return rc;
}
static int x25_wait_for_data(struct sock *sk, long timeout)
{
DECLARE_WAITQUEUE(wait, current);
int rc = 0;
add_wait_queue_exclusive(sk_sleep(sk), &wait);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
if (sk->sk_shutdown & RCV_SHUTDOWN)
break;
rc = -ERESTARTSYS;
if (signal_pending(current))
break;
rc = -EAGAIN;
if (!timeout)
break;
rc = 0;
if (skb_queue_empty(&sk->sk_receive_queue)) {
release_sock(sk);
timeout = schedule_timeout(timeout);
lock_sock(sk);
} else
break;
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(sk), &wait);
return rc;
}
net: Work around lockdep limitation in sockets that use sockets Lockdep issues a circular dependency warning when AFS issues an operation through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem. The theory lockdep comes up with is as follows: (1) If the pagefault handler decides it needs to read pages from AFS, it calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but creating a call requires the socket lock: mmap_sem must be taken before sk_lock-AF_RXRPC (2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind() binds the underlying UDP socket whilst holding its socket lock. inet_bind() takes its own socket lock: sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET (3) Reading from a TCP socket into a userspace buffer might cause a fault and thus cause the kernel to take the mmap_sem, but the TCP socket is locked whilst doing this: sk_lock-AF_INET must be taken before mmap_sem However, lockdep's theory is wrong in this instance because it deals only with lock classes and not individual locks. The AF_INET lock in (2) isn't really equivalent to the AF_INET lock in (3) as the former deals with a socket entirely internal to the kernel that never sees userspace. This is a limitation in the design of lockdep. Fix the general case by: (1) Double up all the locking keys used in sockets so that one set are used if the socket is created by userspace and the other set is used if the socket is created by the kernel. (2) Store the kern parameter passed to sk_alloc() in a variable in the sock struct (sk_kern_sock). This informs sock_lock_init(), sock_init_data() and sk_clone_lock() as to the lock keys to be used. Note that the child created by sk_clone_lock() inherits the parent's kern setting. (3) Add a 'kern' parameter to ->accept() that is analogous to the one passed in to ->create() that distinguishes whether kernel_accept() or sys_accept4() was the caller and can be passed to sk_alloc(). Note that a lot of accept functions merely dequeue an already allocated socket. I haven't touched these as the new socket already exists before we get the parameter. Note also that there are a couple of places where I've made the accepted socket unconditionally kernel-based: irda_accept() rds_rcp_accept_one() tcp_accept_from_sock() because they follow a sock_create_kern() and accept off of that. Whilst creating this, I noticed that lustre and ocfs don't create sockets through sock_create_kern() and thus they aren't marked as for-kernel, though they appear to be internal. I wonder if these should do that so that they use the new set of lock keys. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 16:09:05 +08:00
static int x25_accept(struct socket *sock, struct socket *newsock, int flags,
bool kern)
{
struct sock *sk = sock->sk;
struct sock *newsk;
struct sk_buff *skb;
int rc = -EINVAL;
if (!sk)
goto out;
rc = -EOPNOTSUPP;
if (sk->sk_type != SOCK_SEQPACKET)
goto out;
lock_sock(sk);
rc = -EINVAL;
if (sk->sk_state != TCP_LISTEN)
goto out2;
rc = x25_wait_for_data(sk, sk->sk_rcvtimeo);
if (rc)
goto out2;
skb = skb_dequeue(&sk->sk_receive_queue);
rc = -EINVAL;
if (!skb->sk)
goto out2;
newsk = skb->sk;
sock_graft(newsk, newsock);
/* Now attach up the new socket */
skb->sk = NULL;
kfree_skb(skb);
sk_acceptq_removed(sk);
newsock->state = SS_CONNECTED;
rc = 0;
out2:
release_sock(sk);
out:
return rc;
}
static int x25_getname(struct socket *sock, struct sockaddr *uaddr,
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
int peer)
{
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)uaddr;
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
int rc = 0;
if (peer) {
if (sk->sk_state != TCP_ESTABLISHED) {
rc = -ENOTCONN;
goto out;
}
sx25->sx25_addr = x25->dest_addr;
} else
sx25->sx25_addr = x25->source_addr;
sx25->sx25_family = AF_X25;
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13 03:00:20 +08:00
rc = sizeof(*sx25);
out:
return rc;
}
int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
unsigned int lci)
{
struct sock *sk;
struct sock *make;
struct x25_sock *makex25;
struct x25_address source_addr, dest_addr;
struct x25_facilities facilities;
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
struct x25_dte_facilities dte_facilities;
int len, addr_len, rc;
/*
* Remove the LCI and frame type.
*/
skb_pull(skb, X25_STD_MIN_LEN);
/*
* Extract the X.25 addresses and convert them to ASCII strings,
* and remove them.
*
* Address block is mandatory in call request packets
*/
addr_len = x25_parse_address_block(skb, &source_addr, &dest_addr);
if (addr_len <= 0)
goto out_clear_request;
skb_pull(skb, addr_len);
/*
* Get the length of the facilities, skip past them for the moment
* get the call user data because this is needed to determine
* the correct listener
*
* Facilities length is mandatory in call request packets
*/
if (!pskb_may_pull(skb, 1))
goto out_clear_request;
len = skb->data[0] + 1;
if (!pskb_may_pull(skb, len))
goto out_clear_request;
skb_pull(skb,len);
/*
* Ensure that the amount of call user data is valid.
*/
if (skb->len > X25_MAX_CUD_LEN)
goto out_clear_request;
/*
* Get all the call user data so it can be used in
* x25_find_listener and skb_copy_from_linear_data up ahead.
*/
if (!pskb_may_pull(skb, skb->len))
goto out_clear_request;
/*
* Find a listener for the particular address/cud pair.
*/
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
sk = x25_find_listener(&source_addr,skb);
skb_push(skb,len);
if (sk != NULL && sk_acceptq_is_full(sk)) {
goto out_sock_put;
}
/*
* We dont have any listeners for this incoming call.
* Try forwarding it.
*/
if (sk == NULL) {
skb_push(skb, addr_len + X25_STD_MIN_LEN);
if (sysctl_x25_forward &&
x25_forward_call(&dest_addr, nb, skb, lci) > 0)
{
/* Call was forwarded, dont process it any more */
kfree_skb(skb);
rc = 1;
goto out;
} else {
/* No listeners, can't forward, clear the call */
goto out_clear_request;
}
}
/*
* Try to reach a compromise on the requested facilities.
*/
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
len = x25_negotiate_facilities(skb, sk, &facilities, &dte_facilities);
if (len == -1)
goto out_sock_put;
/*
* current neighbour/link might impose additional limits
* on certain facilties
*/
x25_limit_facilities(&facilities, nb);
/*
* Try to create a new socket.
*/
make = x25_make_new(sk);
if (!make)
goto out_sock_put;
/*
* Remove the facilities
*/
skb_pull(skb, len);
skb->sk = make;
make->sk_state = TCP_ESTABLISHED;
makex25 = x25_sk(make);
makex25->lci = lci;
makex25->dest_addr = dest_addr;
makex25->source_addr = source_addr;
makex25->neighbour = nb;
makex25->facilities = facilities;
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
makex25->dte_facilities= dte_facilities;
makex25->vc_facil_mask = x25_sk(sk)->vc_facil_mask;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
/* ensure no reverse facil on accept */
makex25->vc_facil_mask &= ~X25_MASK_REVERSE;
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
/* ensure no calling address extension on accept */
makex25->vc_facil_mask &= ~X25_MASK_CALLING_AE;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
makex25->cudmatchlength = x25_sk(sk)->cudmatchlength;
/* Normally all calls are accepted immediately */
if (test_bit(X25_ACCPT_APPRV_FLAG, &makex25->flags)) {
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:16:17 +08:00
x25_write_internal(make, X25_CALL_ACCEPTED);
makex25->state = X25_STATE_3;
} else {
makex25->state = X25_STATE_5;
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:16:17 +08:00
}
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
/*
* Incoming Call User Data.
*/
skb_copy_from_linear_data(skb, makex25->calluserdata.cuddata, skb->len);
makex25->calluserdata.cudlength = skb->len;
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
sk_acceptq_added(sk);
x25_insert_socket(make);
skb_queue_head(&sk->sk_receive_queue, skb);
x25_start_heartbeat(make);
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_data_ready(sk);
rc = 1;
sock_put(sk);
out:
return rc;
out_sock_put:
sock_put(sk);
out_clear_request:
rc = 0;
x25_transmit_clear_request(nb, lci, 0x01);
goto out;
}
static int x25_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
DECLARE_SOCKADDR(struct sockaddr_x25 *, usx25, msg->msg_name);
struct sockaddr_x25 sx25;
struct sk_buff *skb;
unsigned char *asmptr;
int noblock = msg->msg_flags & MSG_DONTWAIT;
size_t size;
int qbit = 0, rc = -EINVAL;
lock_sock(sk);
if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_OOB|MSG_EOR|MSG_CMSG_COMPAT))
goto out;
/* we currently don't support segmented records at the user interface */
if (!(msg->msg_flags & (MSG_EOR|MSG_OOB)))
goto out;
rc = -EADDRNOTAVAIL;
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
rc = -EPIPE;
if (sk->sk_shutdown & SEND_SHUTDOWN) {
send_sig(SIGPIPE, current, 0);
goto out;
}
rc = -ENETUNREACH;
if (!x25->neighbour)
goto out;
if (usx25) {
rc = -EINVAL;
if (msg->msg_namelen < sizeof(sx25))
goto out;
memcpy(&sx25, usx25, sizeof(sx25));
rc = -EISCONN;
if (strcmp(x25->dest_addr.x25_addr, sx25.sx25_addr.x25_addr))
goto out;
rc = -EINVAL;
if (sx25.sx25_family != AF_X25)
goto out;
} else {
/*
* FIXME 1003.1g - if the socket is like this because
* it has become closed (not started closed) we ought
* to SIGPIPE, EPIPE;
*/
rc = -ENOTCONN;
if (sk->sk_state != TCP_ESTABLISHED)
goto out;
sx25.sx25_family = AF_X25;
sx25.sx25_addr = x25->dest_addr;
}
/* Sanity check the packet size */
if (len > 65535) {
rc = -EMSGSIZE;
goto out;
}
SOCK_DEBUG(sk, "x25_sendmsg: sendto: Addresses built.\n");
/* Build a packet */
SOCK_DEBUG(sk, "x25_sendmsg: sendto: building packet.\n");
if ((msg->msg_flags & MSG_OOB) && len > 32)
len = 32;
size = len + X25_MAX_L2_LEN + X25_EXT_MIN_LEN;
release_sock(sk);
skb = sock_alloc_send_skb(sk, size, noblock, &rc);
lock_sock(sk);
if (!skb)
goto out;
X25_SKB_CB(skb)->flags = msg->msg_flags;
skb_reserve(skb, X25_MAX_L2_LEN + X25_EXT_MIN_LEN);
/*
* Put the data on the end
*/
SOCK_DEBUG(sk, "x25_sendmsg: Copying user data\n");
skb_reset_transport_header(skb);
skb_put(skb, len);
rc = memcpy_from_msg(skb_transport_header(skb), msg, len);
if (rc)
goto out_kfree_skb;
/*
* If the Q BIT Include socket option is in force, the first
* byte of the user data is the logical value of the Q Bit.
*/
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
if (!pskb_may_pull(skb, 1))
goto out_kfree_skb;
qbit = skb->data[0];
skb_pull(skb, 1);
}
/*
* Push down the X.25 header
*/
SOCK_DEBUG(sk, "x25_sendmsg: Building X.25 Header.\n");
if (msg->msg_flags & MSG_OOB) {
if (x25->neighbour->extended) {
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_EXTSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_INTERRUPT;
} else {
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_STDSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_INTERRUPT;
}
} else {
if (x25->neighbour->extended) {
/* Build an Extended X.25 header */
asmptr = skb_push(skb, X25_EXT_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_EXTSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_DATA;
*asmptr++ = X25_DATA;
} else {
/* Build an Standard X.25 header */
asmptr = skb_push(skb, X25_STD_MIN_LEN);
*asmptr++ = ((x25->lci >> 8) & 0x0F) | X25_GFI_STDSEQ;
*asmptr++ = (x25->lci >> 0) & 0xFF;
*asmptr++ = X25_DATA;
}
if (qbit)
skb->data[0] |= X25_Q_BIT;
}
SOCK_DEBUG(sk, "x25_sendmsg: Built header.\n");
SOCK_DEBUG(sk, "x25_sendmsg: Transmitting buffer\n");
rc = -ENOTCONN;
if (sk->sk_state != TCP_ESTABLISHED)
goto out_kfree_skb;
if (msg->msg_flags & MSG_OOB)
skb_queue_tail(&x25->interrupt_out_queue, skb);
else {
rc = x25_output(sk, skb);
len = rc;
if (rc < 0)
kfree_skb(skb);
else if (test_bit(X25_Q_BIT_FLAG, &x25->flags))
len++;
}
x25_kick(sk);
rc = len;
out:
release_sock(sk);
return rc;
out_kfree_skb:
kfree_skb(skb);
goto out;
}
static int x25_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int flags)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
DECLARE_SOCKADDR(struct sockaddr_x25 *, sx25, msg->msg_name);
size_t copied;
x25: Fix NULL dereference in x25_recvmsg commit cb101ed2 in 3.0 introduced a bug in x25_recvmsg() When passed bogus junk from userspace, x25->neighbour can be NULL, as shown in this oops.. BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] PGD 1015f3067 PUD 105072067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 27928, comm: iknowthis Not tainted 3.1.0+ #2 Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H RIP: 0010:[<ffffffffa05482bd>] [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] RSP: 0018:ffff88010c0b7cc8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88010c0b7d78 RCX: 0000000000000c02 RDX: ffff88010c0b7d78 RSI: ffff88011c93dc00 RDI: ffff880103f667b0 RBP: ffff88010c0b7d18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880103f667b0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f479ce7f700(0000) GS:ffff88012a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000001c CR3: 000000010529e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process iknowthis (pid: 27928, threadinfo ffff88010c0b6000, task ffff880103faa4f0) Stack: 0000000000000c02 0000000000000c02 ffff88010c0b7d18 ffffff958153cb37 ffffffff8153cb60 0000000000000c02 ffff88011c93dc00 0000000000000000 0000000000000c02 ffff88010c0b7e10 ffff88010c0b7de8 ffffffff815372c2 Call Trace: [<ffffffff8153cb60>] ? sock_update_classid+0xb0/0x180 [<ffffffff815372c2>] sock_aio_read.part.10+0x142/0x150 [<ffffffff812d6752>] ? inode_has_perm+0x62/0xa0 [<ffffffff815372fd>] sock_aio_read+0x2d/0x40 [<ffffffff811b05e2>] do_sync_read+0xd2/0x110 [<ffffffff812d3796>] ? security_file_permission+0x96/0xb0 [<ffffffff811b0a91>] ? rw_verify_area+0x61/0x100 [<ffffffff811b103d>] vfs_read+0x16d/0x180 [<ffffffff811b109d>] sys_read+0x4d/0x90 [<ffffffff81657282>] system_call_fastpath+0x16/0x1b Code: 8b 66 20 4c 8b 32 48 89 d3 48 89 4d b8 45 89 c7 c7 45 cc 95 ff ff ff 4d 85 e4 0f 84 ed 01 00 00 49 8b 84 24 18 05 00 00 4c 89 e7 78 1c 01 45 19 ed 31 f6 e8 d5 37 ff e0 41 0f b6 44 24 0e 41 Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-02 00:26:44 +08:00
int qbit, header_len;
struct sk_buff *skb;
unsigned char *asmptr;
int rc = -ENOTCONN;
lock_sock(sk);
x25: Fix NULL dereference in x25_recvmsg commit cb101ed2 in 3.0 introduced a bug in x25_recvmsg() When passed bogus junk from userspace, x25->neighbour can be NULL, as shown in this oops.. BUG: unable to handle kernel NULL pointer dereference at 000000000000001c IP: [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] PGD 1015f3067 PUD 105072067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Pid: 27928, comm: iknowthis Not tainted 3.1.0+ #2 Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H RIP: 0010:[<ffffffffa05482bd>] [<ffffffffa05482bd>] x25_recvmsg+0x4d/0x280 [x25] RSP: 0018:ffff88010c0b7cc8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88010c0b7d78 RCX: 0000000000000c02 RDX: ffff88010c0b7d78 RSI: ffff88011c93dc00 RDI: ffff880103f667b0 RBP: ffff88010c0b7d18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880103f667b0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f479ce7f700(0000) GS:ffff88012a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000001c CR3: 000000010529e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process iknowthis (pid: 27928, threadinfo ffff88010c0b6000, task ffff880103faa4f0) Stack: 0000000000000c02 0000000000000c02 ffff88010c0b7d18 ffffff958153cb37 ffffffff8153cb60 0000000000000c02 ffff88011c93dc00 0000000000000000 0000000000000c02 ffff88010c0b7e10 ffff88010c0b7de8 ffffffff815372c2 Call Trace: [<ffffffff8153cb60>] ? sock_update_classid+0xb0/0x180 [<ffffffff815372c2>] sock_aio_read.part.10+0x142/0x150 [<ffffffff812d6752>] ? inode_has_perm+0x62/0xa0 [<ffffffff815372fd>] sock_aio_read+0x2d/0x40 [<ffffffff811b05e2>] do_sync_read+0xd2/0x110 [<ffffffff812d3796>] ? security_file_permission+0x96/0xb0 [<ffffffff811b0a91>] ? rw_verify_area+0x61/0x100 [<ffffffff811b103d>] vfs_read+0x16d/0x180 [<ffffffff811b109d>] sys_read+0x4d/0x90 [<ffffffff81657282>] system_call_fastpath+0x16/0x1b Code: 8b 66 20 4c 8b 32 48 89 d3 48 89 4d b8 45 89 c7 c7 45 cc 95 ff ff ff 4d 85 e4 0f 84 ed 01 00 00 49 8b 84 24 18 05 00 00 4c 89 e7 78 1c 01 45 19 ed 31 f6 e8 d5 37 ff e0 41 0f b6 44 24 0e 41 Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-02 00:26:44 +08:00
if (x25->neighbour == NULL)
goto out;
header_len = x25->neighbour->extended ?
X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
/*
* This works for seqpacket too. The receiver has ordered the queue for
* us! We do one quick check first though
*/
if (sk->sk_state != TCP_ESTABLISHED)
goto out;
if (flags & MSG_OOB) {
rc = -EINVAL;
if (sock_flag(sk, SOCK_URGINLINE) ||
!skb_peek(&x25->interrupt_in_queue))
goto out;
skb = skb_dequeue(&x25->interrupt_in_queue);
if (!pskb_may_pull(skb, X25_STD_MIN_LEN))
goto out_free_dgram;
skb_pull(skb, X25_STD_MIN_LEN);
/*
* No Q bit information on Interrupt data.
*/
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
asmptr = skb_push(skb, 1);
*asmptr = 0x00;
}
msg->msg_flags |= MSG_OOB;
} else {
/* Now we can treat all alike */
release_sock(sk);
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &rc);
lock_sock(sk);
if (!skb)
goto out;
if (!pskb_may_pull(skb, header_len))
goto out_free_dgram;
qbit = (skb->data[0] & X25_Q_BIT) == X25_Q_BIT;
skb_pull(skb, header_len);
if (test_bit(X25_Q_BIT_FLAG, &x25->flags)) {
asmptr = skb_push(skb, 1);
*asmptr = qbit;
}
}
skb_reset_transport_header(skb);
copied = skb->len;
if (copied > size) {
copied = size;
msg->msg_flags |= MSG_TRUNC;
}
/* Currently, each datagram always contains a complete record */
msg->msg_flags |= MSG_EOR;
rc = skb_copy_datagram_msg(skb, 0, msg, copied);
if (rc)
goto out_free_dgram;
if (sx25) {
sx25->sx25_family = AF_X25;
sx25->sx25_addr = x25->dest_addr;
net: rework recvmsg handler msg_name and msg_namelen logic This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21 10:14:22 +08:00
msg->msg_namelen = sizeof(*sx25);
}
x25_check_rbuf(sk);
rc = copied;
out_free_dgram:
skb_free_datagram(sk, skb);
out:
release_sock(sk);
return rc;
}
static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
{
struct sock *sk = sock->sk;
struct x25_sock *x25 = x25_sk(sk);
void __user *argp = (void __user *)arg;
int rc;
switch (cmd) {
case TIOCOUTQ: {
int amount;
amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
if (amount < 0)
amount = 0;
rc = put_user(amount, (unsigned int __user *)argp);
break;
}
case TIOCINQ: {
struct sk_buff *skb;
int amount = 0;
/*
* These two are safe on a single CPU system as
* only user tasks fiddle here
*/
lock_sock(sk);
if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
amount = skb->len;
release_sock(sk);
rc = put_user(amount, (unsigned int __user *)argp);
break;
}
case SIOCGIFADDR:
case SIOCSIFADDR:
case SIOCGIFDSTADDR:
case SIOCSIFDSTADDR:
case SIOCGIFBRDADDR:
case SIOCSIFBRDADDR:
case SIOCGIFNETMASK:
case SIOCSIFNETMASK:
case SIOCGIFMETRIC:
case SIOCSIFMETRIC:
rc = -EINVAL;
break;
case SIOCADDRT:
case SIOCDELRT:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = x25_route_ioctl(cmd, argp);
break;
case SIOCX25GSUBSCRIP:
rc = x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25SSUBSCRIP:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25GFACILITIES: {
lock_sock(sk);
rc = copy_to_user(argp, &x25->facilities,
sizeof(x25->facilities))
? -EFAULT : 0;
release_sock(sk);
break;
}
case SIOCX25SFACILITIES: {
struct x25_facilities facilities;
rc = -EFAULT;
if (copy_from_user(&facilities, argp, sizeof(facilities)))
break;
rc = -EINVAL;
lock_sock(sk);
if (sk->sk_state != TCP_LISTEN &&
sk->sk_state != TCP_CLOSE)
goto out_fac_release;
if (facilities.pacsize_in < X25_PS16 ||
facilities.pacsize_in > X25_PS4096)
goto out_fac_release;
if (facilities.pacsize_out < X25_PS16 ||
facilities.pacsize_out > X25_PS4096)
goto out_fac_release;
if (facilities.winsize_in < 1 ||
facilities.winsize_in > 127)
goto out_fac_release;
if (facilities.throughput) {
int out = facilities.throughput & 0xf0;
int in = facilities.throughput & 0x0f;
if (!out)
facilities.throughput |=
X25_DEFAULT_THROUGHPUT << 4;
else if (out < 0x30 || out > 0xD0)
goto out_fac_release;
if (!in)
facilities.throughput |=
X25_DEFAULT_THROUGHPUT;
else if (in < 0x03 || in > 0x0D)
goto out_fac_release;
}
if (facilities.reverse &&
(facilities.reverse & 0x81) != 0x81)
goto out_fac_release;
x25->facilities = facilities;
rc = 0;
out_fac_release:
release_sock(sk);
break;
}
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
case SIOCX25GDTEFACILITIES: {
lock_sock(sk);
rc = copy_to_user(argp, &x25->dte_facilities,
sizeof(x25->dte_facilities));
release_sock(sk);
if (rc)
rc = -EFAULT;
break;
}
[X25]: allow ITU-T DTE facilities for x25 Allows use of the optional user facility to insert ITU-T (http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25 packets. This feature is optional; no facilities will be added if the ioctl is not used, and call setup packet remains the same as before. If the ioctls provided by the patch are used, then a facility marker will be added to the x25 packet header so that the called dte address extension facility can be differentiated from other types of facilities (as described in the ITU-T X.25 recommendation) that are also allowed in the x25 packet header. Facility markers are made up of two octets, and may be present in the x25 packet headers of call-request, incoming call, call accepted, clear request, and clear indication packets. The first of the two octets represents the facility code field and is set to zero by this patch. The second octet of the marker represents the facility parameter field and is set to 0x0F because the marker will be inserted before ITU-T type DTE facilities. Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks will support the facility markers with a facility parameter field set to all ones or to 00001111", therefore this patch should work with all x.25 networks. While there are many ITU-T DTE facilities, this patch implements only the called and calling address extension, with placeholders in the x25_dte_facilities structure for the rest of the facilities. Testing: This patch was tested using a cisco xot router connected on its serial ports to an X.25 network, and on its lan ports to a host running an xotd daemon. It is also possible to test this patch using an xotd daemon and an x25tap patch, where the xotd daemons work back-to-back without actually using an x.25 network. See www.fyonne.net for details on how to do this. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Acked-by: Andrew Hendry <ahendry@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 16:01:31 +08:00
case SIOCX25SDTEFACILITIES: {
struct x25_dte_facilities dtefacs;
rc = -EFAULT;
if (copy_from_user(&dtefacs, argp, sizeof(dtefacs)))
break;
rc = -EINVAL;
lock_sock(sk);
if (sk->sk_state != TCP_LISTEN &&
sk->sk_state != TCP_CLOSE)
goto out_dtefac_release;
if (dtefacs.calling_len > X25_MAX_AE_LEN)
goto out_dtefac_release;
if (dtefacs.called_len > X25_MAX_AE_LEN)
goto out_dtefac_release;
x25->dte_facilities = dtefacs;
rc = 0;
out_dtefac_release:
release_sock(sk);
break;
}
case SIOCX25GCALLUSERDATA: {
lock_sock(sk);
rc = copy_to_user(argp, &x25->calluserdata,
sizeof(x25->calluserdata))
? -EFAULT : 0;
release_sock(sk);
break;
}
case SIOCX25SCALLUSERDATA: {
struct x25_calluserdata calluserdata;
rc = -EFAULT;
if (copy_from_user(&calluserdata, argp, sizeof(calluserdata)))
break;
rc = -EINVAL;
if (calluserdata.cudlength > X25_MAX_CUD_LEN)
break;
lock_sock(sk);
x25->calluserdata = calluserdata;
release_sock(sk);
rc = 0;
break;
}
case SIOCX25GCAUSEDIAG: {
lock_sock(sk);
rc = copy_to_user(argp, &x25->causediag, sizeof(x25->causediag))
? -EFAULT : 0;
release_sock(sk);
break;
}
case SIOCX25SCAUSEDIAG: {
struct x25_causediag causediag;
rc = -EFAULT;
if (copy_from_user(&causediag, argp, sizeof(causediag)))
break;
lock_sock(sk);
x25->causediag = causediag;
release_sock(sk);
rc = 0;
break;
}
case SIOCX25SCUDMATCHLEN: {
struct x25_subaddr sub_addr;
rc = -EINVAL;
lock_sock(sk);
if(sk->sk_state != TCP_CLOSE)
goto out_cud_release;
rc = -EFAULT;
if (copy_from_user(&sub_addr, argp,
sizeof(sub_addr)))
goto out_cud_release;
rc = -EINVAL;
if (sub_addr.cudmatchlength > X25_MAX_CUD_LEN)
goto out_cud_release;
x25->cudmatchlength = sub_addr.cudmatchlength;
rc = 0;
out_cud_release:
release_sock(sk);
break;
}
[X25]: Selective sub-address matching with call user data. From: Shaun Pereira <spereira@tusc.com.au> This is the first (independent of the second) patch of two that I am working on with x25 on linux (tested with xot on a cisco router). Details are as follows. Current state of module: A server using the current implementation (2.6.11.7) of the x25 module will accept a call request/ incoming call packet at the listening x.25 address, from all callers to that address, as long as NO call user data is present in the packet header. If the server needs to choose to accept a particular call request/ incoming call packet arriving at its listening x25 address, then the kernel has to allow a match of call user data present in the call request packet with its own. This is required when multiple servers listen at the same x25 address and device interface. The kernel currently matches ALL call user data, if present. Current Changes: This patch is a follow up to the patch submitted previously by Andrew Hendry, and allows the user to selectively control the number of octets of call user data in the call request packet, that the kernel will match. By default no call user data is matched, even if call user data is present. To allow call user data matching, a cudmatchlength > 0 has to be passed into the kernel after which the passed number of octets will be matched. Otherwise the kernel behavior is exactly as the original implementation. This patch also ensures that as is normally the case, no call user data will be present in the Call accepted / call connected packet sent back to the caller Future Changes on next patch: There are cases however when call user data may be present in the call accepted packet. According to the X.25 recommendation (ITU-T 10/96) section 5.2.3.2 call user data may be present in the call accepted packet provided the fast select facility is used. My next patch will include this fast select utility and the ability to send up to 128 octets call user data in the call accepted packet provided the fast select facility is used. I am currently testing this, again with xot on linux and cisco. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> (With a fix from Alexey Dobriyan <adobriyan@gmail.com>) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:15:01 +08:00
case SIOCX25CALLACCPTAPPRV: {
rc = -EINVAL;
lock_sock(sk);
if (sk->sk_state == TCP_CLOSE) {
clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
rc = 0;
}
release_sock(sk);
break;
}
[X25]: Fast select with no restriction on response This patch is a follow up to patch 1 regarding "Selective Sub Address matching with call user data". It allows use of the Fast-Select-Acceptance optional user facility for X.25. This patch just implements fast select with no restriction on response (NRR). What this means (according to ITU-T Recomendation 10/96 section 6.16) is that if in an incoming call packet, the relevant facility bits are set for fast-select-NRR, then the called DTE can issue a direct response to the incoming packet using a call-accepted packet that contains call-user-data. This patch allows such a response. The called DTE can also respond with a clear-request packet that contains call-user-data. However, this feature is currently not implemented by the patch. How is Fast Select Acceptance used? By default, the system does not allow fast select acceptance (as before). To enable a response to fast select acceptance, After a listen socket in created and bound as follows socket(AF_X25, SOCK_SEQPACKET, 0); bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr)); but before a listen system call is made, the following ioctl should be used. ioctl(call_soc,SIOCX25CALLACCPTAPPRV); Now the listen system call can be made listen(call_soc, 4); After this, an incoming-call packet will be accepted, but no call-accepted packet will be sent back until the following system call is made on the socket that accepts the call ioctl(vc_soc,SIOCX25SENDCALLACCPT); The network (or cisco xot router used for testing here) will allow the application server's call-user-data in the call-accepted packet, provided the call-request was made with Fast-select NRR. Signed-off-by: Shaun Pereira <spereira@tusc.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-23 13:16:17 +08:00
case SIOCX25SENDCALLACCPT: {
rc = -EINVAL;
lock_sock(sk);
if (sk->sk_state != TCP_ESTABLISHED)
goto out_sendcallaccpt_release;
/* must call accptapprv above */
if (test_bit(X25_ACCPT_APPRV_FLAG, &x25->flags))
goto out_sendcallaccpt_release;
x25_write_internal(sk, X25_CALL_ACCEPTED);
x25->state = X25_STATE_3;
rc = 0;
out_sendcallaccpt_release:
release_sock(sk);
break;
}
default:
rc = -ENOIOCTLCMD;
break;
}
return rc;
}
static const struct net_proto_family x25_family_ops = {
.family = AF_X25,
.create = x25_create,
.owner = THIS_MODULE,
};
#ifdef CONFIG_COMPAT
static int compat_x25_subscr_ioctl(unsigned int cmd,
struct compat_x25_subscrip_struct __user *x25_subscr32)
{
struct compat_x25_subscrip_struct x25_subscr;
struct x25_neigh *nb;
struct net_device *dev;
int rc = -EINVAL;
rc = -EFAULT;
if (copy_from_user(&x25_subscr, x25_subscr32, sizeof(*x25_subscr32)))
goto out;
rc = -EINVAL;
dev = x25_dev_get(x25_subscr.device);
if (dev == NULL)
goto out;
nb = x25_get_neigh(dev);
if (nb == NULL)
goto out_dev_put;
dev_put(dev);
if (cmd == SIOCX25GSUBSCRIP) {
read_lock_bh(&x25_neigh_list_lock);
x25_subscr.extended = nb->extended;
x25_subscr.global_facil_mask = nb->global_facil_mask;
read_unlock_bh(&x25_neigh_list_lock);
rc = copy_to_user(x25_subscr32, &x25_subscr,
sizeof(*x25_subscr32)) ? -EFAULT : 0;
} else {
rc = -EINVAL;
if (x25_subscr.extended == 0 || x25_subscr.extended == 1) {
rc = 0;
write_lock_bh(&x25_neigh_list_lock);
nb->extended = x25_subscr.extended;
nb->global_facil_mask = x25_subscr.global_facil_mask;
write_unlock_bh(&x25_neigh_list_lock);
}
}
x25_neigh_put(nb);
out:
return rc;
out_dev_put:
dev_put(dev);
goto out;
}
static int compat_x25_ioctl(struct socket *sock, unsigned int cmd,
unsigned long arg)
{
void __user *argp = compat_ptr(arg);
int rc = -ENOIOCTLCMD;
switch(cmd) {
case TIOCOUTQ:
case TIOCINQ:
rc = x25_ioctl(sock, cmd, (unsigned long)argp);
break;
case SIOCGIFADDR:
case SIOCSIFADDR:
case SIOCGIFDSTADDR:
case SIOCSIFDSTADDR:
case SIOCGIFBRDADDR:
case SIOCSIFBRDADDR:
case SIOCGIFNETMASK:
case SIOCSIFNETMASK:
case SIOCGIFMETRIC:
case SIOCSIFMETRIC:
rc = -EINVAL;
break;
case SIOCADDRT:
case SIOCDELRT:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = x25_route_ioctl(cmd, argp);
break;
case SIOCX25GSUBSCRIP:
rc = compat_x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25SSUBSCRIP:
rc = -EPERM;
if (!capable(CAP_NET_ADMIN))
break;
rc = compat_x25_subscr_ioctl(cmd, argp);
break;
case SIOCX25GFACILITIES:
case SIOCX25SFACILITIES:
case SIOCX25GDTEFACILITIES:
case SIOCX25SDTEFACILITIES:
case SIOCX25GCALLUSERDATA:
case SIOCX25SCALLUSERDATA:
case SIOCX25GCAUSEDIAG:
case SIOCX25SCAUSEDIAG:
case SIOCX25SCUDMATCHLEN:
case SIOCX25CALLACCPTAPPRV:
case SIOCX25SENDCALLACCPT:
rc = x25_ioctl(sock, cmd, (unsigned long)argp);
break;
default:
rc = -ENOIOCTLCMD;
break;
}
return rc;
}
#endif
static const struct proto_ops x25_proto_ops = {
.family = AF_X25,
.owner = THIS_MODULE,
.release = x25_release,
.bind = x25_bind,
.connect = x25_connect,
.socketpair = sock_no_socketpair,
.accept = x25_accept,
.getname = x25_getname,
.poll = datagram_poll,
.ioctl = x25_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_x25_ioctl,
#endif
.gettstamp = sock_gettstamp,
.listen = x25_listen,
.shutdown = sock_no_shutdown,
.setsockopt = x25_setsockopt,
.getsockopt = x25_getsockopt,
.sendmsg = x25_sendmsg,
.recvmsg = x25_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
};
static struct packet_type x25_packet_type __read_mostly = {
.type = cpu_to_be16(ETH_P_X25),
.func = x25_lapb_receive_frame,
};
static struct notifier_block x25_dev_notifier = {
.notifier_call = x25_device_event,
};
void x25_kill_by_neigh(struct x25_neigh *nb)
{
struct sock *s;
write_lock_bh(&x25_list_lock);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each(s, &x25_list)
if (x25_sk(s)->neighbour == nb)
x25_disconnect(s, ENETUNREACH, 0, 0);
write_unlock_bh(&x25_list_lock);
/* Remove any related forwards */
x25_clear_forward_by_dev(nb->dev);
}
static int __init x25_init(void)
{
int rc;
rc = proto_register(&x25_proto, 0);
if (rc)
goto out;
rc = sock_register(&x25_family_ops);
if (rc)
goto out_proto;
dev_add_pack(&x25_packet_type);
rc = register_netdevice_notifier(&x25_dev_notifier);
if (rc)
goto out_sock;
rc = x25_register_sysctl();
if (rc)
goto out_dev;
rc = x25_proc_init();
if (rc)
goto out_sysctl;
pr_info("Linux Version 0.2\n");
out:
return rc;
out_sysctl:
x25_unregister_sysctl();
out_dev:
unregister_netdevice_notifier(&x25_dev_notifier);
out_sock:
dev_remove_pack(&x25_packet_type);
sock_unregister(AF_X25);
out_proto:
proto_unregister(&x25_proto);
goto out;
}
module_init(x25_init);
static void __exit x25_exit(void)
{
x25_proc_exit();
x25_link_free();
x25_route_free();
x25_unregister_sysctl();
unregister_netdevice_notifier(&x25_dev_notifier);
dev_remove_pack(&x25_packet_type);
sock_unregister(AF_X25);
proto_unregister(&x25_proto);
}
module_exit(x25_exit);
MODULE_AUTHOR("Jonathan Naylor <g4klx@g4klx.demon.co.uk>");
MODULE_DESCRIPTION("The X.25 Packet Layer network layer protocol");
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_X25);