OpenCloudOS-Kernel/kernel/trace/trace_stack.c

375 lines
7.7 KiB
C
Raw Normal View History

ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
/*
* Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com>
*
*/
#include <linux/stacktrace.h>
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/debugfs.h>
#include <linux/ftrace.h>
#include <linux/module.h>
#include <linux/sysctl.h>
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
#include <linux/init.h>
#include <linux/fs.h>
#include "trace.h"
#define STACK_TRACE_ENTRIES 500
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES+1] =
{ [0 ... (STACK_TRACE_ENTRIES)] = ULONG_MAX };
static unsigned stack_dump_index[STACK_TRACE_ENTRIES];
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static struct stack_trace max_stack_trace = {
.max_entries = STACK_TRACE_ENTRIES,
.entries = stack_dump_trace,
};
static unsigned long max_stack_size;
static arch_spinlock_t max_stack_lock =
(arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static int stack_trace_disabled __read_mostly;
static DEFINE_PER_CPU(int, trace_active);
static DEFINE_MUTEX(stack_sysctl_mutex);
int stack_tracer_enabled;
static int last_stack_tracer_enabled;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static inline void check_stack(void)
{
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
unsigned long this_size, flags;
unsigned long *p, *top, *start;
int i;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
this_size = ((unsigned long)&this_size) & (THREAD_SIZE-1);
this_size = THREAD_SIZE - this_size;
if (this_size <= max_stack_size)
return;
/* we do not handle interrupt stacks yet */
if (!object_is_on_stack(&this_size))
return;
local_irq_save(flags);
arch_spin_lock(&max_stack_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
/* a race could have already updated it */
if (this_size <= max_stack_size)
goto out;
max_stack_size = this_size;
max_stack_trace.nr_entries = 0;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
max_stack_trace.skip = 3;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
save_stack_trace(&max_stack_trace);
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
/*
* Now find where in the stack these are.
*/
i = 0;
start = &this_size;
top = (unsigned long *)
(((unsigned long)start & ~(THREAD_SIZE-1)) + THREAD_SIZE);
/*
* Loop through all the entries. One of the entries may
* for some reason be missed on the stack, so we may
* have to account for them. If they are all there, this
* loop will only happen once. This code only takes place
* on a new max, so it is far from a fast path.
*/
while (i < max_stack_trace.nr_entries) {
int found = 0;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
stack_dump_index[i] = this_size;
p = start;
for (; p < top && i < max_stack_trace.nr_entries; p++) {
if (*p == stack_dump_trace[i]) {
this_size = stack_dump_index[i++] =
(top - p) * sizeof(unsigned long);
found = 1;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
/* Start the search from here */
start = p + 1;
}
}
if (!found)
i++;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
out:
arch_spin_unlock(&max_stack_lock);
local_irq_restore(flags);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static void
stack_trace_call(unsigned long ip, unsigned long parent_ip)
{
int cpu, resched;
if (unlikely(!ftrace_enabled || stack_trace_disabled))
return;
resched = ftrace_preempt_disable();
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
cpu = raw_smp_processor_id();
/* no atomic needed, we only modify this variable by this cpu */
if (per_cpu(trace_active, cpu)++ != 0)
goto out;
check_stack();
out:
per_cpu(trace_active, cpu)--;
/* prevent recursion in schedule */
ftrace_preempt_enable(resched);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static struct ftrace_ops trace_ops __read_mostly =
{
.func = stack_trace_call,
};
static ssize_t
stack_max_size_read(struct file *filp, char __user *ubuf,
size_t count, loff_t *ppos)
{
unsigned long *ptr = filp->private_data;
char buf[64];
int r;
r = snprintf(buf, sizeof(buf), "%ld\n", *ptr);
if (r > sizeof(buf))
r = sizeof(buf);
return simple_read_from_buffer(ubuf, count, ppos, buf, r);
}
static ssize_t
stack_max_size_write(struct file *filp, const char __user *ubuf,
size_t count, loff_t *ppos)
{
long *ptr = filp->private_data;
unsigned long val, flags;
char buf[64];
int ret;
int cpu;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
if (count >= sizeof(buf))
return -EINVAL;
if (copy_from_user(&buf, ubuf, count))
return -EFAULT;
buf[count] = 0;
ret = strict_strtoul(buf, 10, &val);
if (ret < 0)
return ret;
local_irq_save(flags);
/*
* In case we trace inside arch_spin_lock() or after (NMI),
* we will cause circular lock, so we also need to increase
* the percpu trace_active here.
*/
cpu = smp_processor_id();
per_cpu(trace_active, cpu)++;
arch_spin_lock(&max_stack_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
*ptr = val;
arch_spin_unlock(&max_stack_lock);
per_cpu(trace_active, cpu)--;
local_irq_restore(flags);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return count;
}
static const struct file_operations stack_max_size_fops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
.open = tracing_open_generic,
.read = stack_max_size_read,
.write = stack_max_size_write,
};
static void *
__next(struct seq_file *m, loff_t *pos)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
{
long n = *pos - 1;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
if (n >= max_stack_trace.nr_entries || stack_dump_trace[n] == ULONG_MAX)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return NULL;
m->private = (void *)n;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
return &m->private;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
{
(*pos)++;
return __next(m, pos);
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static void *t_start(struct seq_file *m, loff_t *pos)
{
int cpu;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
local_irq_disable();
cpu = smp_processor_id();
per_cpu(trace_active, cpu)++;
arch_spin_lock(&max_stack_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
if (*pos == 0)
return SEQ_START_TOKEN;
return __next(m, pos);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static void t_stop(struct seq_file *m, void *p)
{
int cpu;
arch_spin_unlock(&max_stack_lock);
cpu = smp_processor_id();
per_cpu(trace_active, cpu)--;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
local_irq_enable();
}
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
static int trace_lookup_stack(struct seq_file *m, long i)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
{
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
unsigned long addr = stack_dump_trace[i];
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return seq_printf(m, "%pF\n", (void *)addr);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static void print_disabled(struct seq_file *m)
{
seq_puts(m, "#\n"
"# Stack tracer disabled\n"
"#\n"
"# To enable the stack tracer, either add 'stacktrace' to the\n"
"# kernel command line\n"
"# or 'echo 1 > /proc/sys/kernel/stack_tracer_enabled'\n"
"#\n");
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static int t_show(struct seq_file *m, void *v)
{
long i;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
int size;
if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
" (%d entries)\n"
" ----- ---- --------\n",
max_stack_trace.nr_entries - 1);
if (!stack_tracer_enabled && !max_stack_size)
print_disabled(m);
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
return 0;
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
i = *(long *)v;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return 0;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-30 04:51:43 +08:00
if (i+1 == max_stack_trace.nr_entries ||
stack_dump_trace[i+1] == ULONG_MAX)
size = stack_dump_index[i];
else
size = stack_dump_index[i] - stack_dump_index[i+1];
seq_printf(m, "%3ld) %8d %5d ", i, stack_dump_index[i], size);
trace_lookup_stack(m, i);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return 0;
}
static const struct seq_operations stack_trace_seq_ops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
.start = t_start,
.next = t_next,
.stop = t_stop,
.show = t_show,
};
static int stack_trace_open(struct inode *inode, struct file *file)
{
return seq_open(file, &stack_trace_seq_ops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
}
static const struct file_operations stack_trace_fops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
.open = stack_trace_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
};
int
stack_trace_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&stack_sysctl_mutex);
ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write ||
(last_stack_tracer_enabled == !!stack_tracer_enabled))
goto out;
last_stack_tracer_enabled = !!stack_tracer_enabled;
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
else
unregister_ftrace_function(&trace_ops);
out:
mutex_unlock(&stack_sysctl_mutex);
return ret;
}
static __init int enable_stacktrace(char *str)
{
stack_tracer_enabled = 1;
last_stack_tracer_enabled = 1;
return 1;
}
__setup("stacktrace", enable_stacktrace);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
static __init int stack_trace_init(void)
{
struct dentry *d_tracer;
d_tracer = tracing_init_dentry();
trace_create_file("stack_max_size", 0644, d_tracer,
&max_stack_size, &stack_max_size_fops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
trace_create_file("stack_trace", 0444, d_tracer,
NULL, &stack_trace_fops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 11:31:01 +08:00
return 0;
}
device_initcall(stack_trace_init);