OpenCloudOS-Kernel/include/linux/msi.h

360 lines
12 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LINUX_MSI_H
#define LINUX_MSI_H
#include <linux/kobject.h>
#include <linux/list.h>
struct msi_msg {
u32 address_lo; /* low 32 bits of msi message address */
u32 address_hi; /* high 32 bits of msi message address */
u32 data; /* 16 bits of msi message data */
};
extern int pci_msi_ignore_mask;
/* Helper functions */
struct irq_data;
struct msi_desc;
struct pci_dev;
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
struct platform_msi_priv_data;
void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
#ifdef CONFIG_GENERIC_MSI_IRQ
void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
#else
static inline void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg)
{
}
#endif
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
typedef void (*irq_write_msi_msg_t)(struct msi_desc *desc,
struct msi_msg *msg);
/**
* platform_msi_desc - Platform device specific msi descriptor data
* @msi_priv_data: Pointer to platform private data
* @msi_index: The index of the MSI descriptor for multi MSI
*/
struct platform_msi_desc {
struct platform_msi_priv_data *msi_priv_data;
u16 msi_index;
};
/**
* fsl_mc_msi_desc - FSL-MC device specific msi descriptor data
* @msi_index: The index of the MSI descriptor
*/
struct fsl_mc_msi_desc {
u16 msi_index;
};
/**
* struct msi_desc - Descriptor structure for MSI based interrupts
* @list: List head for management
* @irq: The base interrupt number
* @nvec_used: The number of vectors used
* @dev: Pointer to the device which uses this descriptor
* @msg: The last set MSI message cached for reuse
* @affinity: Optional pointer to a cpu affinity mask for this descriptor
*
* @masked: [PCI MSI/X] Mask bits
* @is_msix: [PCI MSI/X] True if MSI-X
* @multiple: [PCI MSI/X] log2 num of messages allocated
* @multi_cap: [PCI MSI/X] log2 num of messages supported
* @maskbit: [PCI MSI/X] Mask-Pending bit supported?
* @is_64: [PCI MSI/X] Address size: 0=32bit 1=64bit
* @entry_nr: [PCI MSI/X] Entry which is described by this descriptor
* @default_irq:[PCI MSI/X] The default pre-assigned non-MSI irq
* @mask_pos: [PCI MSI] Mask register position
* @mask_base: [PCI MSI-X] Mask register base address
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
* @platform: [platform] Platform device specific msi descriptor data
* @fsl_mc: [fsl-mc] FSL MC device specific msi descriptor data
*/
struct msi_desc {
/* Shared device/bus type independent data */
struct list_head list;
unsigned int irq;
unsigned int nvec_used;
struct device *dev;
struct msi_msg msg;
genirq/core: Introduce struct irq_affinity_desc The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-04 23:51:20 +08:00
struct irq_affinity_desc *affinity;
union {
/* PCI MSI/X specific data */
struct {
u32 masked;
struct {
__u8 is_msix : 1;
__u8 multiple : 3;
__u8 multi_cap : 3;
__u8 maskbit : 1;
__u8 is_64 : 1;
__u16 entry_nr;
unsigned default_irq;
} msi_attrib;
union {
u8 mask_pos;
void __iomem *mask_base;
};
};
/*
* Non PCI variants add their data structure here. New
* entries need to use a named structure. We want
* proper name spaces for this. The PCI part is
* anonymous for now as it would require an immediate
* tree wide cleanup.
*/
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
struct platform_msi_desc platform;
struct fsl_mc_msi_desc fsl_mc;
};
};
/* Helpers to hide struct msi_desc implementation details */
#define msi_desc_to_dev(desc) ((desc)->dev)
#define dev_to_msi_list(dev) (&(dev)->msi_list)
#define first_msi_entry(dev) \
list_first_entry(dev_to_msi_list((dev)), struct msi_desc, list)
#define for_each_msi_entry(desc, dev) \
list_for_each_entry((desc), dev_to_msi_list((dev)), list)
platform-msi: Free descriptors in platform_msi_domain_free() Since the addition of platform MSI support, there were two helpers supposed to allocate/free IRQs for a device: platform_msi_domain_alloc_irqs() platform_msi_domain_free_irqs() In these helpers, IRQ descriptors are allocated in the "alloc" routine while they are freed in the "free" one. Later, two other helpers have been added to handle IRQ domains on top of MSI domains: platform_msi_domain_alloc() platform_msi_domain_free() Seen from the outside, the logic is pretty close with the former helpers and people used it with the same logic as before: a platform_msi_domain_alloc() call should be balanced with a platform_msi_domain_free() call. While this is probably what was intended to do, the platform_msi_domain_free() does not remove/free the IRQ descriptor(s) created/inserted in platform_msi_domain_alloc(). One effect of such situation is that removing a module that requested an IRQ will let one orphaned IRQ descriptor (with an allocated MSI entry) in the device descriptors list. Next time the module will be inserted back, one will observe that the allocation will happen twice in the MSI domain, one time for the remaining descriptor, one time for the new one. It also has the side effect to quickly overshoot the maximum number of allocated MSI and then prevent any module requesting an interrupt in the same domain to be inserted anymore. This situation has been met with loops of insertion/removal of the mvpp2.ko module (requesting 15 MSIs each time). Fixes: 552c494a7666 ("platform-msi: Allow creation of a MSI-based stacked irq domain") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-11 17:12:34 +08:00
#define for_each_msi_entry_safe(desc, tmp, dev) \
list_for_each_entry_safe((desc), (tmp), dev_to_msi_list((dev)), list)
#ifdef CONFIG_PCI_MSI
#define first_pci_msi_entry(pdev) first_msi_entry(&(pdev)->dev)
#define for_each_pci_msi_entry(desc, pdev) \
for_each_msi_entry((desc), &(pdev)->dev)
struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc);
void *msi_desc_to_pci_sysdata(struct msi_desc *desc);
void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg);
#else /* CONFIG_PCI_MSI */
static inline void *msi_desc_to_pci_sysdata(struct msi_desc *desc)
{
return NULL;
}
static inline void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg)
{
}
#endif /* CONFIG_PCI_MSI */
struct msi_desc *alloc_msi_entry(struct device *dev, int nvec,
genirq/core: Introduce struct irq_affinity_desc The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-04 23:51:20 +08:00
const struct irq_affinity_desc *affinity);
void free_msi_entry(struct msi_desc *entry);
void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag);
u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
void pci_msi_mask_irq(struct irq_data *data);
void pci_msi_unmask_irq(struct irq_data *data);
/* Conversion helpers. Should be removed after merging */
static inline void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
{
__pci_write_msi_msg(entry, msg);
}
static inline void write_msi_msg(int irq, struct msi_msg *msg)
{
pci_write_msi_msg(irq, msg);
}
static inline void mask_msi_irq(struct irq_data *data)
{
pci_msi_mask_irq(data);
}
static inline void unmask_msi_irq(struct irq_data *data)
{
pci_msi_unmask_irq(data);
}
/*
PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:06 +08:00
* The arch hooks to setup up msi irqs. Those functions are
* implemented as weak symbols so that they /can/ be overriden by
* architecture specific code if needed.
*/
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
void arch_teardown_msi_irq(unsigned int irq);
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
void arch_teardown_msi_irqs(struct pci_dev *dev);
void arch_restore_msi_irqs(struct pci_dev *dev);
PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-10 04:27:06 +08:00
void default_teardown_msi_irqs(struct pci_dev *dev);
void default_restore_msi_irqs(struct pci_dev *dev);
struct msi_controller {
struct module *owner;
struct device *dev;
struct device_node *of_node;
struct list_head list;
int (*setup_irq)(struct msi_controller *chip, struct pci_dev *dev,
struct msi_desc *desc);
int (*setup_irqs)(struct msi_controller *chip, struct pci_dev *dev,
int nvec, int type);
void (*teardown_irq)(struct msi_controller *chip, unsigned int irq);
};
#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
#include <linux/irqhandler.h>
#include <asm/msi.h>
struct irq_domain;
struct irq_domain_ops;
struct irq_chip;
struct device_node;
struct fwnode_handle;
struct msi_domain_info;
/**
* struct msi_domain_ops - MSI interrupt domain callbacks
* @get_hwirq: Retrieve the resulting hw irq number
* @msi_init: Domain specific init function for MSI interrupts
* @msi_free: Domain specific function to free a MSI interrupts
* @msi_check: Callback for verification of the domain/info/dev data
* @msi_prepare: Prepare the allocation of the interrupts in the domain
* @msi_finish: Optional callback to finalize the allocation
* @set_desc: Set the msi descriptor for an interrupt
* @handle_error: Optional error handler if the allocation fails
*
* @get_hwirq, @msi_init and @msi_free are callbacks used by
* msi_create_irq_domain() and related interfaces
*
* @msi_check, @msi_prepare, @msi_finish, @set_desc and @handle_error
* are callbacks used by msi_domain_alloc_irqs() and related
* interfaces which are based on msi_desc.
*/
struct msi_domain_ops {
irq_hw_number_t (*get_hwirq)(struct msi_domain_info *info,
msi_alloc_info_t *arg);
int (*msi_init)(struct irq_domain *domain,
struct msi_domain_info *info,
unsigned int virq, irq_hw_number_t hwirq,
msi_alloc_info_t *arg);
void (*msi_free)(struct irq_domain *domain,
struct msi_domain_info *info,
unsigned int virq);
int (*msi_check)(struct irq_domain *domain,
struct msi_domain_info *info,
struct device *dev);
int (*msi_prepare)(struct irq_domain *domain,
struct device *dev, int nvec,
msi_alloc_info_t *arg);
void (*msi_finish)(msi_alloc_info_t *arg, int retval);
void (*set_desc)(msi_alloc_info_t *arg,
struct msi_desc *desc);
int (*handle_error)(struct irq_domain *domain,
struct msi_desc *desc, int error);
};
/**
* struct msi_domain_info - MSI interrupt domain data
* @flags: Flags to decribe features and capabilities
* @ops: The callback data structure
* @chip: Optional: associated interrupt chip
* @chip_data: Optional: associated interrupt chip data
* @handler: Optional: associated interrupt flow handler
* @handler_data: Optional: associated interrupt flow handler data
* @handler_name: Optional: associated interrupt flow handler name
* @data: Optional: domain specific data
*/
struct msi_domain_info {
u32 flags;
struct msi_domain_ops *ops;
struct irq_chip *chip;
void *chip_data;
irq_flow_handler_t handler;
void *handler_data;
const char *handler_name;
void *data;
};
/* Flags for msi_domain_info */
enum {
/*
* Init non implemented ops callbacks with default MSI domain
* callbacks.
*/
MSI_FLAG_USE_DEF_DOM_OPS = (1 << 0),
/*
* Init non implemented chip callbacks with default MSI chip
* callbacks.
*/
MSI_FLAG_USE_DEF_CHIP_OPS = (1 << 1),
/* Support multiple PCI MSI interrupts */
MSI_FLAG_MULTI_PCI_MSI = (1 << 2),
/* Support PCI MSIX interrupts */
MSI_FLAG_PCI_MSIX = (1 << 3),
genirq/msi: Make sure PCI MSIs are activated early Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru> Reported-by: Matthias Prager <linux@matthiasprager.de> Reported-by: Jason Taylor <jason.taylor@simplivity.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-14 00:18:33 +08:00
/* Needs early activate, required for PCI */
MSI_FLAG_ACTIVATE_EARLY = (1 << 4),
/*
* Must reactivate when irq is started even when
* MSI_FLAG_ACTIVATE_EARLY has been set.
*/
MSI_FLAG_MUST_REACTIVATE = (1 << 5),
/* Is level-triggered capable, using two messages */
MSI_FLAG_LEVEL_CAPABLE = (1 << 6),
};
int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force);
struct irq_domain *msi_create_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info,
struct irq_domain *parent);
int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
int nvec);
void msi_domain_free_irqs(struct irq_domain *domain, struct device *dev);
struct msi_domain_info *msi_get_domain_info(struct irq_domain *domain);
struct irq_domain *platform_msi_create_irq_domain(struct fwnode_handle *fwnode,
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 21:46:16 +08:00
struct msi_domain_info *info,
struct irq_domain *parent);
int platform_msi_domain_alloc_irqs(struct device *dev, unsigned int nvec,
irq_write_msi_msg_t write_msi_msg);
void platform_msi_domain_free_irqs(struct device *dev);
/* When an MSI domain is used as an intermediate domain */
int msi_domain_prepare_irqs(struct irq_domain *domain, struct device *dev,
int nvec, msi_alloc_info_t *args);
int msi_domain_populate_irqs(struct irq_domain *domain, struct device *dev,
int virq, int nvec, msi_alloc_info_t *args);
struct irq_domain *
__platform_msi_create_device_domain(struct device *dev,
unsigned int nvec,
bool is_tree,
irq_write_msi_msg_t write_msi_msg,
const struct irq_domain_ops *ops,
void *host_data);
#define platform_msi_create_device_domain(dev, nvec, write, ops, data) \
__platform_msi_create_device_domain(dev, nvec, false, write, ops, data)
#define platform_msi_create_device_tree_domain(dev, nvec, write, ops, data) \
__platform_msi_create_device_domain(dev, nvec, true, write, ops, data)
int platform_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs);
void platform_msi_domain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nvec);
void *platform_msi_get_host_data(struct irq_domain *domain);
#endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg);
struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info,
struct irq_domain *parent);
irq_hw_number_t pci_msi_domain_calc_hwirq(struct pci_dev *dev,
struct msi_desc *desc);
int pci_msi_domain_check_cap(struct irq_domain *domain,
struct msi_domain_info *info, struct device *dev);
u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev);
struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev);
#else
static inline struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev)
{
return NULL;
}
#endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */
#endif /* LINUX_MSI_H */