UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/Kconfig.debug

277 lines
8.1 KiB
Plaintext
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
menu "Kernel hacking"
source "lib/Kconfig.debug"
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
[POWERPC] Enable stack debug features on ppc32 Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 14:45:56 +08:00
depends on DEBUG_KERNEL
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
help
This option will cause messages to be printed if free stack space
drops below a certain limit.
config DEBUG_STACK_USAGE
bool "Stack utilization instrumentation"
[POWERPC] Enable stack debug features on ppc32 Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 14:45:56 +08:00
depends on DEBUG_KERNEL
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
help
Enables the display of the minimum amount of free stack which each
task has ever had available in the sysrq-T and sysrq-P debug output.
This option will slow down process creation somewhat.
[POWERPC] DEBUG_PAGEALLOC for 32-bit Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 13:30:22 +08:00
config DEBUG_PAGEALLOC
bool "Debug page memory allocations"
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 05:24:36 +08:00
depends on DEBUG_KERNEL && !HIBERNATION
[POWERPC] DEBUG_PAGEALLOC for 32-bit Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 13:30:22 +08:00
help
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
of memory corruptions.
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 07:23:12 +08:00
config HCALL_STATS
bool "Hypervisor call instrumentation"
depends on PPC_PSERIES && DEBUG_FS
help
Adds code to keep track of the number of hypervisor calls made and
Fix trivial typos in Kconfig* files Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 13:12:20 +08:00
the amount of time spent in hypervisor calls. Wall time spent in
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 07:23:12 +08:00
each call is always calculated, and if available CPU cycles spent
are also calculated. A directory named hcall_inst is added at the
root of the debugfs filesystem. Within the hcall_inst directory
are files that contain CPU specific call statistics.
This option will add a small amount of overhead to all hypervisor
calls.
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
config DEBUGGER
bool "Enable debugger hooks"
depends on DEBUG_KERNEL
help
Include in-kernel hooks for kernel debuggers. Unless you are
intending to debug the kernel, say N here.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
config KGDB
bool "Include kgdb kernel debugger"
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
select DEBUG_INFO
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
Unless you are intending to debug the kernel, say N here.
choice
prompt "Serial Port"
depends on KGDB
default KGDB_TTYS1
config KGDB_TTYS0
bool "ttyS0"
config KGDB_TTYS1
bool "ttyS1"
config KGDB_TTYS2
bool "ttyS2"
config KGDB_TTYS3
bool "ttyS3"
endchoice
config KGDB_CONSOLE
bool "Enable serial console thru kgdb port"
depends on KGDB && 8xx || CPM2
help
If you enable this, all serial console messages will be sent
over the gdb stub.
If unsure, say N.
config XMON
bool "Include xmon kernel debugger"
[POWERPC] Allow xmon to build on legacy iSeries xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-30 08:44:09 +08:00
depends on DEBUGGER
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
nothing will appear on the screen (xmon writes directly to the
framebuffer memory).
The cmdline option 'xmon' or 'xmon=early' will drop into xmon
very early during boot. 'xmon=on' will just enable the xmon
debugger hooks. 'xmon=off' will disable the debugger hooks
if CONFIG_XMON_DEFAULT is set.
[POWERPC] print backtrace when entering xmon xmon does not print a backtrace per default. This is bad on systems with USB keyboard, the most needed info about the crash is lost. print a backtrace during the very first xmon entry. Booting with xmon=nobt disables the autobacktrace functionality. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-08 22:29:21 +08:00
xmon will print a backtrace on the very first invocation.
'xmon=nobt' will disable this autobacktrace.
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
config XMON_DEFAULT
bool "Enable xmon by default"
depends on XMON
help
xmon is normally disabled unless booted with 'xmon=on'.
Use 'xmon=off' to disable xmon init during runtime.
[POWERPC] Make xmon disassembly optional While adding spu disassembly support it struck me that we're actually carrying quite a lot of code around, just to do disassembly in the case of a crash. While on large systems it's not an issue, on smaller ones it might be nice to have xmon - but without the weight of the disassembly support. For a Cell build this saves ~230KB (!), and for pSeries ~195KB. We still support the 'di' and 'sdi' commands, however they just dump the instruction in hex. Move the definitions into a header to clean xmon.c just a tiny bit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 07:46:45 +08:00
config XMON_DISASSEMBLY
bool "Include disassembly support in xmon"
depends on XMON
default y
help
Include support for disassembling in xmon. You probably want
to say Y here, unless you're building for a memory-constrained
system.
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
depends on PPC64
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
overflowing the process kernel stacks.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
[POWERPC] Export virq mapping via debugfs This adds a debugfs file "powerpc/virq_mapping", which shows the virtual to real mapping of irq numbers. Enable it with CONFIG_VIRQ_DEBUG. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Chen Gong <G.Chen@freescale.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-28 16:47:57 +08:00
config VIRQ_DEBUG
bool "Expose hardware/virtual IRQ mapping via debugfs"
depends on DEBUG_FS && PPC_MERGE
help
This option will show the mapping relationship between hardware irq
numbers and virtual irq numbers. The mapping is exposed via debugfs
in the file powerpc/virq_mapping.
If you don't know what this means you don't need it.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
config BDI_SWITCH
bool "Include BDI-2000 user context switcher"
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:15:52 +08:00
depends on DEBUG_KERNEL && PPC32
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
help
Include in-kernel support for the Abatron BDI2000 debugger.
Unless you are intending to debug the kernel with one of these
machines, say N here.
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
kconfig: syntax cleanup - drop support for "depends/requires/def_boolean" Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-27 02:02:52 +08:00
depends on PPC_OF && PPC_MULTIPLATFORM
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 14:03:51 +08:00
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
[POWERPC] Early debug forces console log level to max This makes the early debug option force the console loglevel to the max. The early debug option is meant to catch messages very early in the kernel boot process, in many cases, before the kernel has a chance to parse the "debug" command line argument. Thus it makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console log level to the max at boot time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 11:48:24 +08:00
help
Say Y to enable some early debugging facilities that may be available
for your processor/board combination. Those facilities are hacks
intended to debug problems early during boot, this should not be
enabled in a production kernel.
Note that enabling this will also cause the kernel default log level
to be pushed to max automatically very early during boot
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 14:03:51 +08:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
choice
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 14:03:51 +08:00
prompt "Early debugging console"
depends on PPC_EARLY_DEBUG
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
help
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 14:03:51 +08:00
Use the selected console for early debugging. Careful, if you
enable debugging for the wrong type of machine your kernel
_will not boot_.
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
config PPC_EARLY_DEBUG_LPAR
bool "LPAR HV Console"
depends on PPC_PSERIES
help
Select this to enable early debugging for a machine with a HVC
console on vterm 0.
config PPC_EARLY_DEBUG_G5
bool "Apple G5"
depends on PPC_PMAC64
help
Select this to enable early debugging for Apple G5 machines.
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 16:20:16 +08:00
config PPC_EARLY_DEBUG_RTAS_PANEL
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
bool "RTAS Panel"
depends on PPC_RTAS
help
Select this to enable early debugging via the RTAS panel.
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 16:20:16 +08:00
config PPC_EARLY_DEBUG_RTAS_CONSOLE
bool "RTAS Console"
depends on PPC_RTAS
select UDBG_RTAS_CONSOLE
help
Select this to enable early debugging via the RTAS console.
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
config PPC_EARLY_DEBUG_MAPLE
bool "Maple real mode"
depends on PPC_MAPLE
help
Select this to enable early debugging for Maple.
config PPC_EARLY_DEBUG_ISERIES
bool "iSeries HV Console"
depends on PPC_ISERIES
help
Select this to enable early debugging for legacy iSeries. You need
to hit "Ctrl-x Ctrl-x" to see the messages on the console.
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:49 +08:00
config PPC_EARLY_DEBUG_PAS_REALMODE
bool "PA Semi real mode"
depends on PPC_PASEMI
help
Select this to enable early debugging for PA Semi.
Output will be on UART0.
[POWERPC] Celleb: basic support This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-02 15:47:17 +08:00
config PPC_EARLY_DEBUG_BEAT
bool "Beat HV Console"
depends on PPC_CELLEB
select PPC_UDBG_BEAT
help
Select this to enable early debugging for Celleb with Beat.
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 10:59:31 +08:00
config PPC_EARLY_DEBUG_44x
bool "Early serial debugging for IBM/AMCC 44x CPUs"
depends on 44x
help
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port.
[POWERPC] 4xx: Add early udbg support for 40x processors This adds some basic real mode based early udbg support for 40x in order to debug things more easily Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 12:39:26 +08:00
config PPC_EARLY_DEBUG_40x
bool "Early serial debugging for IBM/AMCC 40x CPUs"
depends on 40x
help
Select this to enable early debugging for IBM 40x chips via the
inbuilt serial port. This works on chips with a 16550 compatible
UART. Xilinx chips with uartlite cannot use this option.
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-17 00:43:43 +08:00
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM
select PIN_TLB if PPC_8xx
help
Select this to enable early debugging for Freescale chips
using a CPM-based serial port. This assumes that the bootwrapper
has run, and set up the CPM in a particular way.
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
endchoice
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 10:59:31 +08:00
config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
kconfig: syntax cleanup - drop support for "depends/requires/def_boolean" Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-27 02:02:52 +08:00
depends on PPC_EARLY_DEBUG_44x
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 10:59:31 +08:00
default "0x40000200"
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
kconfig: syntax cleanup - drop support for "depends/requires/def_boolean" Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-27 02:02:52 +08:00
depends on PPC_EARLY_DEBUG_44x
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 10:59:31 +08:00
default "0x1"
[POWERPC] 4xx: Add early udbg support for 40x processors This adds some basic real mode based early udbg support for 40x in order to debug things more easily Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 12:39:26 +08:00
config PPC_EARLY_DEBUG_40x_PHYSADDR
hex "Early debug UART physical address"
depends on PPC_EARLY_DEBUG_40x
default "0xef600300"
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-17 00:43:43 +08:00
config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
[POWERPC] cpm: Describe multi-user ram in its own device node. The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-29 03:06:16 +08:00
default "0xfa202008" if PPC_EP88XC
default "0xf0000008" if CPM2
default "0xff002008" if CPM1
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-17 00:43:43 +08:00
help
This specifies the address of the transmit descriptor
used for early debug output. Because it is needed before
platform probing is done, all platforms selected must
share the same address.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
endmenu