2019-05-27 14:55:01 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2014-06-05 23:06:57 +08:00
|
|
|
/*
|
|
|
|
* ST Thermal Sensor Driver for memory mapped sensors.
|
|
|
|
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
|
|
|
|
*
|
|
|
|
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
|
|
|
#include "st_thermal.h"
|
|
|
|
|
|
|
|
#define STIH416_MPE_CONF 0x0
|
|
|
|
#define STIH416_MPE_STATUS 0x4
|
|
|
|
#define STIH416_MPE_INT_THRESH 0x8
|
|
|
|
#define STIH416_MPE_INT_EN 0xC
|
|
|
|
|
|
|
|
/* Power control bits for the memory mapped thermal sensor */
|
|
|
|
#define THERMAL_PDN BIT(4)
|
|
|
|
#define THERMAL_SRSTN BIT(10)
|
|
|
|
|
|
|
|
static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
|
|
|
|
/*
|
|
|
|
* According to the STIH416 MPE temp sensor data sheet -
|
|
|
|
* the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
|
|
|
|
* written simultaneously for powering on and off the temperature
|
|
|
|
* sensor. regmap_update_bits() will be used to update the register.
|
|
|
|
*/
|
|
|
|
[INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7),
|
|
|
|
[DCORRECT] = REG_FIELD(STIH416_MPE_CONF, 5, 9),
|
|
|
|
[OVERFLOW] = REG_FIELD(STIH416_MPE_STATUS, 9, 9),
|
|
|
|
[DATA] = REG_FIELD(STIH416_MPE_STATUS, 11, 18),
|
|
|
|
[INT_ENABLE] = REG_FIELD(STIH416_MPE_INT_EN, 0, 0),
|
|
|
|
};
|
|
|
|
|
|
|
|
static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
|
|
|
|
{
|
|
|
|
struct st_thermal_sensor *sensor = sdata;
|
|
|
|
|
2016-08-27 07:21:16 +08:00
|
|
|
thermal_zone_device_update(sensor->thermal_dev,
|
|
|
|
THERMAL_EVENT_UNSPECIFIED);
|
2014-06-05 23:06:57 +08:00
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Private ops for the Memory Mapped based thermal sensors */
|
|
|
|
static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor,
|
|
|
|
enum st_thermal_power_state power_state)
|
|
|
|
{
|
|
|
|
const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN);
|
|
|
|
const unsigned int val = power_state ? mask : 0;
|
|
|
|
|
|
|
|
return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor)
|
|
|
|
{
|
|
|
|
struct device *dev = sensor->dev;
|
|
|
|
struct regmap *regmap = sensor->regmap;
|
|
|
|
const struct reg_field *reg_fields = sensor->cdata->reg_fields;
|
|
|
|
|
|
|
|
sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
|
|
|
|
reg_fields[INT_THRESH_HI]);
|
|
|
|
sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
|
|
|
|
reg_fields[INT_ENABLE]);
|
|
|
|
|
|
|
|
if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
|
|
|
|
dev_err(dev, "failed to alloc mmap regfields\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int st_mmap_enable_irq(struct st_thermal_sensor *sensor)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Set upper critical threshold */
|
|
|
|
ret = regmap_field_write(sensor->int_thresh_hi,
|
|
|
|
sensor->cdata->crit_temp -
|
|
|
|
sensor->cdata->temp_adjust_val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return regmap_field_write(sensor->int_enable, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
|
|
|
|
{
|
|
|
|
struct device *dev = sensor->dev;
|
|
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
sensor->irq = platform_get_irq(pdev, 0);
|
|
|
|
if (sensor->irq < 0) {
|
|
|
|
dev_err(dev, "failed to register IRQ\n");
|
|
|
|
return sensor->irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devm_request_threaded_irq(dev, sensor->irq,
|
|
|
|
NULL, st_mmap_thermal_trip_handler,
|
|
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
|
|
dev->driver->name, sensor);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to register IRQ %d\n", sensor->irq);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return st_mmap_enable_irq(sensor);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regmap_config st_416mpe_regmap_config = {
|
|
|
|
.reg_bits = 32,
|
|
|
|
.val_bits = 32,
|
|
|
|
.reg_stride = 4,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int st_mmap_regmap_init(struct st_thermal_sensor *sensor)
|
|
|
|
{
|
|
|
|
struct device *dev = sensor->dev;
|
|
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
struct resource *res;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
dev_err(dev, "no memory resources defined\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
sensor->mmio_base = devm_ioremap_resource(dev, res);
|
|
|
|
if (IS_ERR(sensor->mmio_base)) {
|
|
|
|
dev_err(dev, "failed to remap IO\n");
|
|
|
|
return PTR_ERR(sensor->mmio_base);
|
|
|
|
}
|
|
|
|
|
|
|
|
sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
|
|
|
|
&st_416mpe_regmap_config);
|
|
|
|
if (IS_ERR(sensor->regmap)) {
|
|
|
|
dev_err(dev, "failed to initialise regmap\n");
|
|
|
|
return PTR_ERR(sensor->regmap);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
|
|
|
|
.power_ctrl = st_mmap_power_ctrl,
|
|
|
|
.alloc_regfields = st_mmap_alloc_regfields,
|
|
|
|
.regmap_init = st_mmap_regmap_init,
|
|
|
|
.register_enable_irq = st_mmap_register_enable_irq,
|
|
|
|
.enable_irq = st_mmap_enable_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Compatible device data stih416 mpe thermal sensor */
|
2015-04-08 04:42:12 +08:00
|
|
|
static const struct st_thermal_compat_data st_416mpe_cdata = {
|
2014-06-05 23:06:57 +08:00
|
|
|
.reg_fields = st_mmap_thermal_regfields,
|
|
|
|
.ops = &st_mmap_sensor_ops,
|
|
|
|
.calibration_val = 14,
|
|
|
|
.temp_adjust_val = -95,
|
|
|
|
.crit_temp = 120,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Compatible device data stih407 thermal sensor */
|
2015-04-08 04:42:12 +08:00
|
|
|
static const struct st_thermal_compat_data st_407_cdata = {
|
2014-06-05 23:06:57 +08:00
|
|
|
.reg_fields = st_mmap_thermal_regfields,
|
|
|
|
.ops = &st_mmap_sensor_ops,
|
|
|
|
.calibration_val = 16,
|
|
|
|
.temp_adjust_val = -95,
|
|
|
|
.crit_temp = 120,
|
|
|
|
};
|
|
|
|
|
2015-03-17 03:17:09 +08:00
|
|
|
static const struct of_device_id st_mmap_thermal_of_match[] = {
|
2014-06-05 23:06:57 +08:00
|
|
|
{ .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata },
|
|
|
|
{ .compatible = "st,stih407-thermal", .data = &st_407_cdata },
|
|
|
|
{ /* sentinel */ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
|
|
|
|
|
2015-04-08 04:42:12 +08:00
|
|
|
static int st_mmap_probe(struct platform_device *pdev)
|
2014-06-05 23:06:57 +08:00
|
|
|
{
|
|
|
|
return st_thermal_register(pdev, st_mmap_thermal_of_match);
|
|
|
|
}
|
|
|
|
|
2015-04-08 04:42:12 +08:00
|
|
|
static int st_mmap_remove(struct platform_device *pdev)
|
2014-06-05 23:06:57 +08:00
|
|
|
{
|
|
|
|
return st_thermal_unregister(pdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver st_mmap_thermal_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "st_thermal_mmap",
|
|
|
|
.pm = &st_thermal_pm_ops,
|
|
|
|
.of_match_table = st_mmap_thermal_of_match,
|
|
|
|
},
|
|
|
|
.probe = st_mmap_probe,
|
|
|
|
.remove = st_mmap_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(st_mmap_thermal_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
|
|
|
|
MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|