OpenCloudOS-Kernel/tools/perf/util/build-id.c

763 lines
17 KiB
C
Raw Normal View History

/*
* build-id.c
*
* build-id support
*
* Copyright (C) 2009, 2010 Red Hat Inc.
* Copyright (C) 2009, 2010 Arnaldo Carvalho de Melo <acme@redhat.com>
*/
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
#include "util.h"
#include <stdio.h>
#include "build-id.h"
#include "event.h"
#include "symbol.h"
#include <linux/kernel.h>
#include "debug.h"
#include "session.h"
#include "tool.h"
#include "header.h"
#include "vdso.h"
perf buildid-cache: Scan and import user SDT events to probe cache perf buildid-cache --add <binary> scans given binary and add the SDT events to probe cache. "sdt_" prefix is appended for all SDT providers to avoid event-name clash with other pre-defined events. It is possible to use the cached SDT events as other cached events, via perf probe --add "sdt_<provider>:<event>=<event>". e.g. ---- # perf buildid-cache --add /lib/libc-2.17.so # perf probe --cache --list | head -n 5 /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392): sdt_libc:setjmp=setjmp sdt_libc:longjmp=longjmp sdt_libc:longjmp_target=longjmp_target sdt_libc:memory_heap_new=memory_heap_new # perf probe -x /usr/lib/libc-2.17.so \ -a sdt_libc:memory_heap_new=memory_heap_new Added new event: sdt_libc:memory_heap_new (on memory_heap_new in /usr/lib/libc-2.17.so) You can now use it in all perf tools, such as: perf record -e sdt_libc:memory_heap_new -aR sleep 1 # perf probe -l sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so) ---- Note that SDT event entries in probe-cache file is somewhat different from normal cached events. Normal one starts with "#", but SDTs are starting with "%". Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 16:04:10 +08:00
#include "probe-file.h"
static bool no_buildid_cache;
int build_id__mark_dso_hit(struct perf_tool *tool __maybe_unused,
union perf_event *event,
struct perf_sample *sample,
struct perf_evsel *evsel __maybe_unused,
struct machine *machine)
{
struct addr_location al;
struct thread *thread = machine__findnew_thread(machine, sample->pid,
sample->tid);
if (thread == NULL) {
pr_err("problem processing %d event, skipping it.\n",
event->header.type);
return -1;
}
thread__find_addr_map(thread, sample->cpumode, MAP__FUNCTION, sample->ip, &al);
if (al.map != NULL)
al.map->dso->hit = 1;
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
thread__put(thread);
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
static int perf_event__exit_del_thread(struct perf_tool *tool __maybe_unused,
union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct perf_sample *sample
__maybe_unused,
struct machine *machine)
{
struct thread *thread = machine__findnew_thread(machine,
event->fork.pid,
event->fork.tid);
dump_printf("(%d:%d):(%d:%d)\n", event->fork.pid, event->fork.tid,
event->fork.ppid, event->fork.ptid);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
if (thread) {
machine__remove_thread(machine, thread);
perf machine: Protect the machine->threads with a rwlock In addition to using refcounts for the struct thread lifetime management, we need to protect access to machine->threads from concurrent access. That happens in 'perf top', where a thread processes events, inserting and deleting entries from that rb_tree while another thread decays hist_entries, that end up dropping references and ultimately deleting threads from the rb_tree and releasing its resources when no further hist_entry (or other data structures, like in 'perf sched') references it. So the rule is the same for refcounts + protected trees in the kernel, get the tree lock, find object, bump the refcount, drop the tree lock, return, use object, drop the refcount if no more use of it is needed, keep it if storing it in some other data structure, drop when releasing that data structure. I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and "perf_event__preprocess_sample(&al)" with "addr_location__put(&al)". The addr_location__put() one is because as we return references to several data structures, we may end up adding more reference counting for the other data structures and then we'll drop it at addr_location__put() time. Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-07 07:43:22 +08:00
thread__put(thread);
}
return 0;
}
struct perf_tool build_id__mark_dso_hit_ops = {
.sample = build_id__mark_dso_hit,
.mmap = perf_event__process_mmap,
.mmap2 = perf_event__process_mmap2,
.fork = perf_event__process_fork,
.exit = perf_event__exit_del_thread,
.attr = perf_event__process_attr,
.build_id = perf_event__process_build_id,
.ordered_events = true,
};
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
int build_id__sprintf(const u8 *build_id, int len, char *bf)
{
char *bid = bf;
const u8 *raw = build_id;
int i;
for (i = 0; i < len; ++i) {
sprintf(bid, "%02x", *raw);
++raw;
bid += 2;
}
return (bid - bf) + 1;
}
int sysfs__sprintf_build_id(const char *root_dir, char *sbuild_id)
{
char notes[PATH_MAX];
u8 build_id[BUILD_ID_SIZE];
int ret;
if (!root_dir)
root_dir = "";
scnprintf(notes, sizeof(notes), "%s/sys/kernel/notes", root_dir);
ret = sysfs__read_build_id(notes, build_id, sizeof(build_id));
if (ret < 0)
return ret;
return build_id__sprintf(build_id, sizeof(build_id), sbuild_id);
}
int filename__sprintf_build_id(const char *pathname, char *sbuild_id)
{
u8 build_id[BUILD_ID_SIZE];
int ret;
ret = filename__read_build_id(pathname, build_id, sizeof(build_id));
if (ret < 0)
return ret;
else if (ret != sizeof(build_id))
return -EINVAL;
return build_id__sprintf(build_id, sizeof(build_id), sbuild_id);
}
/* asnprintf consolidates asprintf and snprintf */
static int asnprintf(char **strp, size_t size, const char *fmt, ...)
{
va_list ap;
int ret;
if (!strp)
return -EINVAL;
va_start(ap, fmt);
if (*strp)
ret = vsnprintf(*strp, size, fmt, ap);
else
ret = vasprintf(strp, fmt, ap);
va_end(ap);
return ret;
}
char *build_id_cache__kallsyms_path(const char *sbuild_id, char *bf,
size_t size)
{
bool retry_old = true;
perf tools: Fix crash in build_id_cache__kallsyms_path() build_id_cache__kallsyms_path() accepts a string buffer but also allocs a buffer using asnprintf. Unfortunately, the its only user passes it a stack-allocated buffer. Freeing it causes crashes like this: $ perf script *** Error in `/home/wangnan/perf': free(): invalid pointer: 0x00007fffffff9630 *** ======= Backtrace: ========= lib64/libc.so.6(+0x6eeef)[0x7ffff5dbaeef] lib64/libc.so.6(+0x78cae)[0x7ffff5dc4cae] lib64/libc.so.6(+0x79987)[0x7ffff5dc5987] /home/w00229757/perf(build_id_cache__kallsyms_path+0x6b)[0x49681b] /home/w00229757/perf[0x4bdd40] /home/w00229757/perf(dso__load+0xa3a)[0x4c048a] /home/w00229757/perf(map__load+0x6f)[0x4d561f] /home/w00229757/perf(thread__find_addr_map+0x235)[0x49e935] /home/w00229757/perf(machine__resolve+0x7d)[0x49ec6d] /home/w00229757/perf[0x4555a8] /home/w00229757/perf[0x4d9507] /home/w00229757/perf[0x4d9e80] /home/w00229757/perf(ordered_events__flush+0x354)[0x4dd444] /home/w00229757/perf(perf_session__process_events+0x3d0)[0x4dc140] /home/w00229757/perf(cmd_script+0x12b0)[0x4592e0] /home/w00229757/perf[0x4911f1] /home/w00229757/perf(main+0x68f)[0x4352ef] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ffff5d6dbd5] /home/w00229757/perf[0x435415] ======= Memory map: ======== This patch simplifies build_id_cache__kallsyms_path(), not even considering allocating a string buffer, so never frees anything. Its caller should manage memory allocation. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Fixes: 01412261d994 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid") Link: http://lkml.kernel.org/r/1465271678-7392-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 11:54:38 +08:00
snprintf(bf, size, "%s/%s/%s/kallsyms",
buildid_dir, DSO__NAME_KALLSYMS, sbuild_id);
retry:
if (!access(bf, F_OK))
return bf;
if (retry_old) {
/* Try old style kallsyms cache */
perf tools: Fix crash in build_id_cache__kallsyms_path() build_id_cache__kallsyms_path() accepts a string buffer but also allocs a buffer using asnprintf. Unfortunately, the its only user passes it a stack-allocated buffer. Freeing it causes crashes like this: $ perf script *** Error in `/home/wangnan/perf': free(): invalid pointer: 0x00007fffffff9630 *** ======= Backtrace: ========= lib64/libc.so.6(+0x6eeef)[0x7ffff5dbaeef] lib64/libc.so.6(+0x78cae)[0x7ffff5dc4cae] lib64/libc.so.6(+0x79987)[0x7ffff5dc5987] /home/w00229757/perf(build_id_cache__kallsyms_path+0x6b)[0x49681b] /home/w00229757/perf[0x4bdd40] /home/w00229757/perf(dso__load+0xa3a)[0x4c048a] /home/w00229757/perf(map__load+0x6f)[0x4d561f] /home/w00229757/perf(thread__find_addr_map+0x235)[0x49e935] /home/w00229757/perf(machine__resolve+0x7d)[0x49ec6d] /home/w00229757/perf[0x4555a8] /home/w00229757/perf[0x4d9507] /home/w00229757/perf[0x4d9e80] /home/w00229757/perf(ordered_events__flush+0x354)[0x4dd444] /home/w00229757/perf(perf_session__process_events+0x3d0)[0x4dc140] /home/w00229757/perf(cmd_script+0x12b0)[0x4592e0] /home/w00229757/perf[0x4911f1] /home/w00229757/perf(main+0x68f)[0x4352ef] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ffff5d6dbd5] /home/w00229757/perf[0x435415] ======= Memory map: ======== This patch simplifies build_id_cache__kallsyms_path(), not even considering allocating a string buffer, so never frees anything. Its caller should manage memory allocation. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Fixes: 01412261d994 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid") Link: http://lkml.kernel.org/r/1465271678-7392-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 11:54:38 +08:00
snprintf(bf, size, "%s/%s/%s",
buildid_dir, DSO__NAME_KALLSYMS, sbuild_id);
retry_old = false;
goto retry;
}
return NULL;
}
char *build_id_cache__linkname(const char *sbuild_id, char *bf, size_t size)
{
char *tmp = bf;
int ret = asnprintf(&bf, size, "%s/.build-id/%.2s/%s", buildid_dir,
sbuild_id, sbuild_id + 2);
if (ret < 0 || (tmp && size < (unsigned int)ret))
return NULL;
return bf;
}
char *build_id_cache__origname(const char *sbuild_id)
{
char *linkname;
char buf[PATH_MAX];
char *ret = NULL, *p;
size_t offs = 5; /* == strlen("../..") */
linkname = build_id_cache__linkname(sbuild_id, NULL, 0);
if (!linkname)
return NULL;
if (readlink(linkname, buf, PATH_MAX) < 0)
goto out;
/* The link should be "../..<origpath>/<sbuild_id>" */
p = strrchr(buf, '/'); /* Cut off the "/<sbuild_id>" */
if (p && (p > buf + offs)) {
*p = '\0';
if (buf[offs + 1] == '[')
offs++; /*
* This is a DSO name, like [kernel.kallsyms].
* Skip the first '/', since this is not the
* cache of a regular file.
*/
ret = strdup(buf + offs); /* Skip "../..[/]" */
}
out:
free(linkname);
return ret;
}
static const char *build_id_cache__basename(bool is_kallsyms, bool is_vdso)
{
return is_kallsyms ? "kallsyms" : (is_vdso ? "vdso" : "elf");
}
char *dso__build_id_filename(const struct dso *dso, char *bf, size_t size)
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
{
bool is_kallsyms = dso__is_kallsyms((struct dso *)dso);
bool is_vdso = dso__is_vdso((struct dso *)dso);
char sbuild_id[SBUILD_ID_SIZE];
char *linkname;
bool alloc = (bf == NULL);
int ret;
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
if (!dso->has_build_id)
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
return NULL;
build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
linkname = build_id_cache__linkname(sbuild_id, NULL, 0);
if (!linkname)
return NULL;
/* Check if old style build_id cache */
if (is_regular_file(linkname))
ret = asnprintf(&bf, size, "%s", linkname);
else
ret = asnprintf(&bf, size, "%s/%s", linkname,
build_id_cache__basename(is_kallsyms, is_vdso));
if (ret < 0 || (!alloc && size < (unsigned int)ret))
bf = NULL;
free(linkname);
return bf;
perf annotate: Use build-ids to find the right DSO We were still using the pathname found on the MMAP event, that could not be the one we used when recording, so use the build-id cache for that, only falling back to use the pathname in the MMAP event if no build-ids are available. With this we now also are able to do secure, seamless offline annotation. Example: [root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10 8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges 4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba 3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet 2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints [root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand [root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0 bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0 [root@doppio linux-2.6-tip]# Reported-by: Stephane Eranian <eranian@google.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-20 23:15:33 +08:00
}
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
bool dso__build_id_is_kmod(const struct dso *dso, char *bf, size_t size)
{
char *id_name = NULL, *ch;
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
struct stat sb;
char sbuild_id[SBUILD_ID_SIZE];
if (!dso->has_build_id)
goto err;
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
id_name = build_id_cache__linkname(sbuild_id, NULL, 0);
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
if (!id_name)
goto err;
if (access(id_name, F_OK))
goto err;
if (lstat(id_name, &sb) == -1)
goto err;
if ((size_t)sb.st_size > size - 1)
goto err;
if (readlink(id_name, bf, size - 1) < 0)
goto err;
bf[sb.st_size] = '\0';
/*
* link should be:
* ../../lib/modules/4.4.0-rc4/kernel/net/ipv4/netfilter/nf_nat_ipv4.ko/a09fe3eb3147dafa4e3b31dbd6257e4d696bdc92
*/
ch = strrchr(bf, '/');
if (!ch)
goto err;
if (ch - 3 < bf)
goto err;
free(id_name);
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
return strncmp(".ko", ch - 3, 3) == 0;
err:
pr_err("Invalid build id: %s\n", id_name ? :
dso->long_name ? :
dso->short_name ? :
"[unknown]");
free(id_name);
perf symbols: Fix symbols searching for module in buildid-cache Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 22:01:27 +08:00
return false;
}
#define dsos__for_each_with_build_id(pos, head) \
list_for_each_entry(pos, head, node) \
if (!pos->has_build_id) \
continue; \
else
static int write_buildid(const char *name, size_t name_len, u8 *build_id,
pid_t pid, u16 misc, int fd)
{
int err;
struct build_id_event b;
size_t len;
len = name_len + 1;
len = PERF_ALIGN(len, NAME_ALIGN);
memset(&b, 0, sizeof(b));
memcpy(&b.build_id, build_id, BUILD_ID_SIZE);
b.pid = pid;
b.header.misc = misc;
b.header.size = sizeof(b) + len;
err = writen(fd, &b, sizeof(b));
if (err < 0)
return err;
return write_padded(fd, name, name_len + 1, len);
}
static int machine__write_buildid_table(struct machine *machine, int fd)
{
int err = 0;
char nm[PATH_MAX];
struct dso *pos;
u16 kmisc = PERF_RECORD_MISC_KERNEL,
umisc = PERF_RECORD_MISC_USER;
if (!machine__is_host(machine)) {
kmisc = PERF_RECORD_MISC_GUEST_KERNEL;
umisc = PERF_RECORD_MISC_GUEST_USER;
}
dsos__for_each_with_build_id(pos, &machine->dsos.head) {
const char *name;
size_t name_len;
bool in_kernel = false;
if (!pos->hit && !dso__is_vdso(pos))
continue;
if (dso__is_vdso(pos)) {
name = pos->short_name;
perf buildid: Fix off-by-one in write_buildid() write_buildid() increments 'name_len' with intention to take into account trailing zero byte. However, 'name_len' was already incremented in machine__write_buildid_table() before. So this leads to out-of-bounds read in do_write(): $ ./perf record sleep 0 [ perf record: Woken up 1 times to write data ] ================================================================= ==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78 READ of size 19 at 0x00000099fc92 thread T0 #0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4) #1 0x649c5b in do_write util/header.c:67 #2 0x649c5b in write_padded util/header.c:82 #3 0x57e8bc in write_buildid util/build-id.c:239 #4 0x57e8bc in machine__write_buildid_table util/build-id.c:278 ... 0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18 '*.LC99' is ascii string '[kernel.kallsyms]' ... Shadow bytes around the buggy address: 0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9 =>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9 0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461053847-5633-1-git-send-email-aryabinin@virtuozzo.com [ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19 16:17:27 +08:00
name_len = pos->short_name_len;
} else if (dso__is_kcore(pos)) {
machine__mmap_name(machine, nm, sizeof(nm));
name = nm;
perf buildid: Fix off-by-one in write_buildid() write_buildid() increments 'name_len' with intention to take into account trailing zero byte. However, 'name_len' was already incremented in machine__write_buildid_table() before. So this leads to out-of-bounds read in do_write(): $ ./perf record sleep 0 [ perf record: Woken up 1 times to write data ] ================================================================= ==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78 READ of size 19 at 0x00000099fc92 thread T0 #0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4) #1 0x649c5b in do_write util/header.c:67 #2 0x649c5b in write_padded util/header.c:82 #3 0x57e8bc in write_buildid util/build-id.c:239 #4 0x57e8bc in machine__write_buildid_table util/build-id.c:278 ... 0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18 '*.LC99' is ascii string '[kernel.kallsyms]' ... Shadow bytes around the buggy address: 0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9 =>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9 0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461053847-5633-1-git-send-email-aryabinin@virtuozzo.com [ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19 16:17:27 +08:00
name_len = strlen(nm);
} else {
name = pos->long_name;
perf buildid: Fix off-by-one in write_buildid() write_buildid() increments 'name_len' with intention to take into account trailing zero byte. However, 'name_len' was already incremented in machine__write_buildid_table() before. So this leads to out-of-bounds read in do_write(): $ ./perf record sleep 0 [ perf record: Woken up 1 times to write data ] ================================================================= ==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78 READ of size 19 at 0x00000099fc92 thread T0 #0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4) #1 0x649c5b in do_write util/header.c:67 #2 0x649c5b in write_padded util/header.c:82 #3 0x57e8bc in write_buildid util/build-id.c:239 #4 0x57e8bc in machine__write_buildid_table util/build-id.c:278 ... 0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18 '*.LC99' is ascii string '[kernel.kallsyms]' ... Shadow bytes around the buggy address: 0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9 =>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9 0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461053847-5633-1-git-send-email-aryabinin@virtuozzo.com [ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19 16:17:27 +08:00
name_len = pos->long_name_len;
}
in_kernel = pos->kernel ||
is_kernel_module(name,
PERF_RECORD_MISC_CPUMODE_UNKNOWN);
err = write_buildid(name, name_len, pos->build_id, machine->pid,
in_kernel ? kmisc : umisc, fd);
if (err)
break;
}
return err;
}
int perf_session__write_buildid_table(struct perf_session *session, int fd)
{
struct rb_node *nd;
int err = machine__write_buildid_table(&session->machines.host, fd);
if (err)
return err;
for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
err = machine__write_buildid_table(pos, fd);
if (err)
break;
}
return err;
}
static int __dsos__hit_all(struct list_head *head)
{
struct dso *pos;
list_for_each_entry(pos, head, node)
pos->hit = true;
return 0;
}
static int machine__hit_all_dsos(struct machine *machine)
{
return __dsos__hit_all(&machine->dsos.head);
}
int dsos__hit_all(struct perf_session *session)
{
struct rb_node *nd;
int err;
err = machine__hit_all_dsos(&session->machines.host);
if (err)
return err;
for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
err = machine__hit_all_dsos(pos);
if (err)
return err;
}
return 0;
}
void disable_buildid_cache(void)
{
no_buildid_cache = true;
}
static bool lsdir_bid_head_filter(const char *name __maybe_unused,
struct dirent *d __maybe_unused)
{
return (strlen(d->d_name) == 2) &&
isxdigit(d->d_name[0]) && isxdigit(d->d_name[1]);
}
static bool lsdir_bid_tail_filter(const char *name __maybe_unused,
struct dirent *d __maybe_unused)
{
int i = 0;
while (isxdigit(d->d_name[i]) && i < SBUILD_ID_SIZE - 3)
i++;
return (i == SBUILD_ID_SIZE - 3) && (d->d_name[i] == '\0');
}
struct strlist *build_id_cache__list_all(void)
{
struct strlist *toplist, *linklist = NULL, *bidlist;
struct str_node *nd, *nd2;
char *topdir, *linkdir = NULL;
char sbuild_id[SBUILD_ID_SIZE];
/* Open the top-level directory */
if (asprintf(&topdir, "%s/.build-id/", buildid_dir) < 0)
return NULL;
bidlist = strlist__new(NULL, NULL);
if (!bidlist)
goto out;
toplist = lsdir(topdir, lsdir_bid_head_filter);
if (!toplist) {
pr_debug("Error in lsdir(%s): %d\n", topdir, errno);
/* If there is no buildid cache, return an empty list */
if (errno == ENOENT)
goto out;
goto err_out;
}
strlist__for_each_entry(nd, toplist) {
if (asprintf(&linkdir, "%s/%s", topdir, nd->s) < 0)
goto err_out;
/* Open the lower-level directory */
linklist = lsdir(linkdir, lsdir_bid_tail_filter);
if (!linklist) {
pr_debug("Error in lsdir(%s): %d\n", linkdir, errno);
goto err_out;
}
strlist__for_each_entry(nd2, linklist) {
if (snprintf(sbuild_id, SBUILD_ID_SIZE, "%s%s",
nd->s, nd2->s) != SBUILD_ID_SIZE - 1)
goto err_out;
if (strlist__add(bidlist, sbuild_id) < 0)
goto err_out;
}
strlist__delete(linklist);
zfree(&linkdir);
}
out_free:
strlist__delete(toplist);
out:
free(topdir);
return bidlist;
err_out:
strlist__delete(linklist);
zfree(&linkdir);
strlist__delete(bidlist);
bidlist = NULL;
goto out_free;
}
char *build_id_cache__cachedir(const char *sbuild_id, const char *name,
bool is_kallsyms, bool is_vdso)
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
{
char *realname = (char *)name, *filename;
bool slash = is_kallsyms || is_vdso;
if (!slash) {
realname = realpath(name, NULL);
if (!realname)
return NULL;
}
if (asprintf(&filename, "%s%s%s%s%s", buildid_dir, slash ? "/" : "",
is_vdso ? DSO__NAME_VDSO : realname,
sbuild_id ? "/" : "", sbuild_id ?: "") < 0)
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
filename = NULL;
if (!slash)
free(realname);
return filename;
}
int build_id_cache__list_build_ids(const char *pathname,
struct strlist **result)
{
char *dir_name;
int ret = 0;
dir_name = build_id_cache__cachedir(NULL, pathname, false, false);
if (!dir_name)
return -ENOMEM;
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
*result = lsdir(dir_name, lsdir_no_dot_filter);
if (!*result)
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
ret = -errno;
free(dir_name);
return ret;
}
#if defined(HAVE_LIBELF_SUPPORT) && defined(HAVE_GELF_GETNOTE_SUPPORT)
perf buildid-cache: Scan and import user SDT events to probe cache perf buildid-cache --add <binary> scans given binary and add the SDT events to probe cache. "sdt_" prefix is appended for all SDT providers to avoid event-name clash with other pre-defined events. It is possible to use the cached SDT events as other cached events, via perf probe --add "sdt_<provider>:<event>=<event>". e.g. ---- # perf buildid-cache --add /lib/libc-2.17.so # perf probe --cache --list | head -n 5 /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392): sdt_libc:setjmp=setjmp sdt_libc:longjmp=longjmp sdt_libc:longjmp_target=longjmp_target sdt_libc:memory_heap_new=memory_heap_new # perf probe -x /usr/lib/libc-2.17.so \ -a sdt_libc:memory_heap_new=memory_heap_new Added new event: sdt_libc:memory_heap_new (on memory_heap_new in /usr/lib/libc-2.17.so) You can now use it in all perf tools, such as: perf record -e sdt_libc:memory_heap_new -aR sleep 1 # perf probe -l sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so) ---- Note that SDT event entries in probe-cache file is somewhat different from normal cached events. Normal one starts with "#", but SDTs are starting with "%". Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 16:04:10 +08:00
static int build_id_cache__add_sdt_cache(const char *sbuild_id,
const char *realname)
{
struct probe_cache *cache;
int ret;
cache = probe_cache__new(sbuild_id);
if (!cache)
return -1;
ret = probe_cache__scan_sdt(cache, realname);
if (ret >= 0) {
pr_debug("Found %d SDTs in %s\n", ret, realname);
if (probe_cache__commit(cache) < 0)
ret = -1;
}
probe_cache__delete(cache);
return ret;
}
#else
#define build_id_cache__add_sdt_cache(sbuild_id, realname) (0)
#endif
int build_id_cache__add_s(const char *sbuild_id, const char *name,
bool is_kallsyms, bool is_vdso)
{
const size_t size = PATH_MAX;
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
char *realname = NULL, *filename = NULL, *dir_name = NULL,
*linkname = zalloc(size), *tmp;
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
int err = -1;
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
if (!is_kallsyms) {
realname = realpath(name, NULL);
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
if (!realname)
goto out_free;
}
dir_name = build_id_cache__cachedir(sbuild_id, name,
is_kallsyms, is_vdso);
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
if (!dir_name)
goto out_free;
/* Remove old style build-id cache */
if (is_regular_file(dir_name))
if (unlink(dir_name))
goto out_free;
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
if (mkdir_p(dir_name, 0755))
goto out_free;
/* Save the allocated buildid dirname */
if (asprintf(&filename, "%s/%s", dir_name,
build_id_cache__basename(is_kallsyms, is_vdso)) < 0) {
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
filename = NULL;
goto out_free;
}
if (access(filename, F_OK)) {
if (is_kallsyms) {
if (copyfile("/proc/kallsyms", filename))
goto out_free;
perf tools: Fix race in build_id_cache__add_s() int build_id_cache__add_s(const char *sbuild_id, const char *debugdir, const char *name, bool is_kallsyms, bool is_vdso) { ... if (access(filename, F_OK)) { ^--------------------------------------------------------- [1] if (is_kallsyms) { if (copyfile("/proc/kallsyms", filename)) goto out_free; } else if (link(realname, filename) && copyfile(name, filename)) ^-----------------------------^------------- [2] \------------ [3] goto out_free; } ... When multiple instances of perf record get to [1] at more or less same time and run access() one or more may get failure because the file does not exist yet (since the first instance did not have chance to link it yet). At this point the race moves to link() at [2] where first thread to get there links file and goes on but second one gets -EEXIST so it runs copyfile [3] which truncates the file. reproducer: rm -rf /root/.debug for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do perf record -a -v -T -F 1000 -C $cpu \ -o perf-${cpu}.data sleep 5 2> /dev/null & done wait and simply search for empty files by: find /lib/modules/`uname -r`/kernel/* -size 0 Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-20 18:37:25 +08:00
} else if (link(realname, filename) && errno != EEXIST &&
copyfile(name, filename))
goto out_free;
}
if (!build_id_cache__linkname(sbuild_id, linkname, size))
goto out_free;
tmp = strrchr(linkname, '/');
*tmp = '\0';
if (access(linkname, X_OK) && mkdir_p(linkname, 0755))
goto out_free;
*tmp = '/';
tmp = dir_name + strlen(buildid_dir) - 5;
memcpy(tmp, "../..", 5);
if (symlink(tmp, linkname) == 0)
err = 0;
perf buildid-cache: Scan and import user SDT events to probe cache perf buildid-cache --add <binary> scans given binary and add the SDT events to probe cache. "sdt_" prefix is appended for all SDT providers to avoid event-name clash with other pre-defined events. It is possible to use the cached SDT events as other cached events, via perf probe --add "sdt_<provider>:<event>=<event>". e.g. ---- # perf buildid-cache --add /lib/libc-2.17.so # perf probe --cache --list | head -n 5 /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392): sdt_libc:setjmp=setjmp sdt_libc:longjmp=longjmp sdt_libc:longjmp_target=longjmp_target sdt_libc:memory_heap_new=memory_heap_new # perf probe -x /usr/lib/libc-2.17.so \ -a sdt_libc:memory_heap_new=memory_heap_new Added new event: sdt_libc:memory_heap_new (on memory_heap_new in /usr/lib/libc-2.17.so) You can now use it in all perf tools, such as: perf record -e sdt_libc:memory_heap_new -aR sleep 1 # perf probe -l sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so) ---- Note that SDT event entries in probe-cache file is somewhat different from normal cached events. Normal one starts with "#", but SDTs are starting with "%". Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 16:04:10 +08:00
/* Update SDT cache : error is just warned */
if (build_id_cache__add_sdt_cache(sbuild_id, realname) < 0)
pr_debug("Failed to update/scan SDT cache for %s\n", realname);
out_free:
if (!is_kallsyms)
free(realname);
free(filename);
perf buildid-cache: Add --purge FILE to remove all caches of FILE Add --purge FILE to remove all caches of FILE. Since the current --remove FILE removes a cache which has same build-id of given FILE. Since the command takes a FILE path, it can confuse user who tries to remove cache about FILE path. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --remove ./perf Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL ./perf wasn't in the cache ----- Actually, the --remove's FAIL is not shown, it just silently fails. So, this patch adds --purge FILE action for such usecase. perf buildid-cache --purge FILE removes all caches which has same FILE path. In other words, it removes all caches including old binaries. ----- # ./perf buildid-cache -v --add ./perf Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok # (update the ./perf binary) # ./perf buildid-cache -v --purge ./perf Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok ----- BTW, if you want to purge all the caches, remove ~/.debug/* . Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain [ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 12:50:26 +08:00
free(dir_name);
free(linkname);
return err;
}
static int build_id_cache__add_b(const u8 *build_id, size_t build_id_size,
const char *name, bool is_kallsyms,
bool is_vdso)
{
char sbuild_id[SBUILD_ID_SIZE];
build_id__sprintf(build_id, build_id_size, sbuild_id);
return build_id_cache__add_s(sbuild_id, name, is_kallsyms, is_vdso);
}
bool build_id_cache__cached(const char *sbuild_id)
{
bool ret = false;
char *filename = build_id_cache__linkname(sbuild_id, NULL, 0);
if (filename && !access(filename, F_OK))
ret = true;
free(filename);
return ret;
}
int build_id_cache__remove_s(const char *sbuild_id)
{
const size_t size = PATH_MAX;
char *filename = zalloc(size),
*linkname = zalloc(size), *tmp;
int err = -1;
if (filename == NULL || linkname == NULL)
goto out_free;
if (!build_id_cache__linkname(sbuild_id, linkname, size))
goto out_free;
if (access(linkname, F_OK))
goto out_free;
if (readlink(linkname, filename, size - 1) < 0)
goto out_free;
if (unlink(linkname))
goto out_free;
/*
* Since the link is relative, we must make it absolute:
*/
tmp = strrchr(linkname, '/') + 1;
snprintf(tmp, size - (tmp - linkname), "%s", filename);
if (rm_rf(linkname))
goto out_free;
err = 0;
out_free:
free(filename);
free(linkname);
return err;
}
static int dso__cache_build_id(struct dso *dso, struct machine *machine)
{
bool is_kallsyms = dso__is_kallsyms(dso);
bool is_vdso = dso__is_vdso(dso);
const char *name = dso->long_name;
char nm[PATH_MAX];
if (dso__is_kcore(dso)) {
is_kallsyms = true;
machine__mmap_name(machine, nm, sizeof(nm));
name = nm;
}
return build_id_cache__add_b(dso->build_id, sizeof(dso->build_id), name,
is_kallsyms, is_vdso);
}
static int __dsos__cache_build_ids(struct list_head *head,
struct machine *machine)
{
struct dso *pos;
int err = 0;
dsos__for_each_with_build_id(pos, head)
if (dso__cache_build_id(pos, machine))
err = -1;
return err;
}
static int machine__cache_build_ids(struct machine *machine)
{
return __dsos__cache_build_ids(&machine->dsos.head, machine);
}
int perf_session__cache_build_ids(struct perf_session *session)
{
struct rb_node *nd;
int ret;
if (no_buildid_cache)
return 0;
if (mkdir(buildid_dir, 0755) != 0 && errno != EEXIST)
return -1;
ret = machine__cache_build_ids(&session->machines.host);
for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret |= machine__cache_build_ids(pos);
}
return ret ? -1 : 0;
}
static bool machine__read_build_ids(struct machine *machine, bool with_hits)
{
return __dsos__read_build_ids(&machine->dsos.head, with_hits);
}
bool perf_session__read_build_ids(struct perf_session *session, bool with_hits)
{
struct rb_node *nd;
bool ret = machine__read_build_ids(&session->machines.host, with_hits);
for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
struct machine *pos = rb_entry(nd, struct machine, rb_node);
ret |= machine__read_build_ids(pos, with_hits);
}
return ret;
}