2006-11-15 02:43:21 +08:00
|
|
|
/*
|
|
|
|
* ixp4xx PATA/Compact Flash driver
|
2007-05-27 07:26:55 +08:00
|
|
|
* Copyright (C) 2006-07 Tower Technologies
|
2006-11-15 02:43:21 +08:00
|
|
|
* Author: Alessandro Zummo <a.zummo@towertech.it>
|
|
|
|
*
|
|
|
|
* An ATA driver to handle a Compact Flash connected
|
|
|
|
* to the ixp4xx expansion bus in TrueIDE mode. The CF
|
|
|
|
* must have it chip selects connected to two CS lines
|
2007-05-27 07:26:55 +08:00
|
|
|
* on the ixp4xx. In the irq is not available, you might
|
|
|
|
* want to modify both this driver and libata to run in
|
|
|
|
* polling mode.
|
2006-11-15 02:43:21 +08:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
|
|
|
|
#define DRV_NAME "pata_ixp4xx_cf"
|
2007-05-27 07:26:55 +08:00
|
|
|
#define DRV_VERSION "0.2"
|
2006-11-15 02:43:21 +08:00
|
|
|
|
2007-08-06 17:36:23 +08:00
|
|
|
static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
|
2006-11-15 02:43:21 +08:00
|
|
|
{
|
2007-08-06 17:36:23 +08:00
|
|
|
struct ata_device *dev;
|
2006-11-15 02:43:21 +08:00
|
|
|
|
2007-08-06 17:36:23 +08:00
|
|
|
ata_link_for_each_dev(dev, link) {
|
2007-05-05 03:27:47 +08:00
|
|
|
if (ata_dev_enabled(dev)) {
|
2007-02-21 01:45:55 +08:00
|
|
|
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
|
2006-11-15 02:43:21 +08:00
|
|
|
dev->pio_mode = XFER_PIO_0;
|
|
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
|
|
}
|
|
|
|
}
|
2007-01-24 19:47:07 +08:00
|
|
|
return 0;
|
2006-11-15 02:43:21 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
|
|
|
|
unsigned int buflen, int write_data)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned int words = buflen >> 1;
|
|
|
|
u16 *buf16 = (u16 *) buf;
|
2007-08-06 17:36:22 +08:00
|
|
|
struct ata_port *ap = adev->link->ap;
|
2007-05-28 19:07:20 +08:00
|
|
|
void __iomem *mmio = ap->ioaddr.data_addr;
|
2006-11-15 02:43:21 +08:00
|
|
|
struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
|
|
|
|
|
|
|
|
/* set the expansion bus in 16bit mode and restore
|
|
|
|
* 8 bit mode after the transaction.
|
|
|
|
*/
|
|
|
|
*data->cs0_cfg &= ~(0x01);
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
|
|
if (write_data) {
|
|
|
|
for (i = 0; i < words; i++)
|
|
|
|
writew(buf16[i], mmio);
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < words; i++)
|
|
|
|
buf16[i] = readw(mmio);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Transfer trailing 1 byte, if any. */
|
|
|
|
if (unlikely(buflen & 0x01)) {
|
|
|
|
u16 align_buf[1] = { 0 };
|
|
|
|
unsigned char *trailing_buf = buf + buflen - 1;
|
|
|
|
|
|
|
|
if (write_data) {
|
|
|
|
memcpy(align_buf, trailing_buf, 1);
|
|
|
|
writew(align_buf[0], mmio);
|
|
|
|
} else {
|
|
|
|
align_buf[0] = readw(mmio);
|
|
|
|
memcpy(trailing_buf, align_buf, 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
udelay(100);
|
|
|
|
*data->cs0_cfg |= 0x01;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct scsi_host_template ixp4xx_sht = {
|
|
|
|
.module = THIS_MODULE,
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.ioctl = ata_scsi_ioctl,
|
|
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
|
|
.emulated = ATA_SHT_EMULATED,
|
|
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
|
|
.proc_name = DRV_NAME,
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
.slave_configure = ata_scsi_slave_config,
|
2006-11-29 11:10:46 +08:00
|
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
2006-11-15 02:43:21 +08:00
|
|
|
.bios_param = ata_std_bios_param,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ata_port_operations ixp4xx_port_ops = {
|
2007-05-27 07:26:55 +08:00
|
|
|
.set_mode = ixp4xx_set_mode,
|
|
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
|
|
|
|
.tf_load = ata_tf_load,
|
|
|
|
.tf_read = ata_tf_read,
|
|
|
|
.exec_command = ata_exec_command,
|
|
|
|
.check_status = ata_check_status,
|
|
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
|
|
.thaw = ata_bmdma_thaw,
|
|
|
|
.error_handler = ata_bmdma_error_handler,
|
|
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ixp4xx_mmio_data_xfer,
|
|
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
|
|
|
|
.irq_handler = ata_interrupt,
|
|
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
.irq_on = ata_irq_on,
|
|
|
|
|
|
|
|
.port_start = ata_port_start,
|
2006-11-15 02:43:21 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
|
2007-08-18 12:14:55 +08:00
|
|
|
struct ixp4xx_pata_data *data,
|
|
|
|
unsigned long raw_cs0, unsigned long raw_cs1)
|
2006-11-15 02:43:21 +08:00
|
|
|
{
|
2007-08-18 12:14:55 +08:00
|
|
|
unsigned long raw_cmd = raw_cs0;
|
|
|
|
unsigned long raw_ctl = raw_cs1 + 0x06;
|
|
|
|
|
2007-02-01 14:06:36 +08:00
|
|
|
ioaddr->cmd_addr = data->cs0;
|
|
|
|
ioaddr->altstatus_addr = data->cs1 + 0x06;
|
|
|
|
ioaddr->ctl_addr = data->cs1 + 0x06;
|
2006-11-15 02:43:21 +08:00
|
|
|
|
|
|
|
ata_std_ports(ioaddr);
|
|
|
|
|
|
|
|
#ifndef __ARMEB__
|
|
|
|
|
|
|
|
/* adjust the addresses to handle the address swizzling of the
|
|
|
|
* ixp4xx in little endian mode.
|
|
|
|
*/
|
|
|
|
|
2007-02-01 14:06:36 +08:00
|
|
|
*(unsigned long *)&ioaddr->data_addr ^= 0x02;
|
|
|
|
*(unsigned long *)&ioaddr->cmd_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->altstatus_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->ctl_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->error_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->feature_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->nsect_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbal_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbam_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->lbah_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->device_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->status_addr ^= 0x03;
|
|
|
|
*(unsigned long *)&ioaddr->command_addr ^= 0x03;
|
2007-08-18 12:14:55 +08:00
|
|
|
|
|
|
|
raw_cmd ^= 0x03;
|
|
|
|
raw_ctl ^= 0x03;
|
2006-11-15 02:43:21 +08:00
|
|
|
#endif
|
2007-08-18 12:14:55 +08:00
|
|
|
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
|
2006-11-15 02:43:21 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
unsigned int irq;
|
|
|
|
struct resource *cs0, *cs1;
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
struct ata_host *host;
|
|
|
|
struct ata_port *ap;
|
2006-11-15 02:43:21 +08:00
|
|
|
struct ixp4xx_pata_data *data = pdev->dev.platform_data;
|
|
|
|
|
|
|
|
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
|
|
|
|
if (!cs0 || !cs1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
/* allocate host */
|
|
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
|
|
if (!host)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
/* acquire resources and fill host */
|
2006-11-15 02:43:21 +08:00
|
|
|
pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
|
|
|
|
|
2007-01-20 15:00:28 +08:00
|
|
|
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
|
|
|
|
data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
|
2006-11-15 02:43:21 +08:00
|
|
|
|
2007-10-03 04:53:01 +08:00
|
|
|
if (!data->cs0 || !data->cs1)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2006-11-15 02:43:21 +08:00
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq)
|
2007-03-18 22:23:33 +08:00
|
|
|
set_irq_type(irq, IRQT_RISING);
|
2006-11-15 02:43:21 +08:00
|
|
|
|
|
|
|
/* Setup expansion bus chip selects */
|
|
|
|
*data->cs0_cfg = data->cs0_bits;
|
|
|
|
*data->cs1_cfg = data->cs1_bits;
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
ap = host->ports[0];
|
2006-11-15 02:43:21 +08:00
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
ap->ops = &ixp4xx_port_ops;
|
|
|
|
ap->pio_mask = 0x1f; /* PIO4 */
|
|
|
|
ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
|
2006-11-15 02:43:21 +08:00
|
|
|
|
2007-08-18 12:14:55 +08:00
|
|
|
ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
|
2006-11-15 02:43:21 +08:00
|
|
|
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
|
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
|
|
|
/* activate host */
|
|
|
|
return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
|
2006-11-15 02:43:21 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct ata_host *host = platform_get_drvdata(dev);
|
|
|
|
|
2007-01-20 15:00:28 +08:00
|
|
|
ata_host_detach(host);
|
2006-11-15 02:43:21 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver ixp4xx_pata_platform_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
.probe = ixp4xx_pata_probe,
|
|
|
|
.remove = __devexit_p(ixp4xx_pata_remove),
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init ixp4xx_pata_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&ixp4xx_pata_platform_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit ixp4xx_pata_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&ixp4xx_pata_platform_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
|
|
|
|
MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
|
|
|
|
module_init(ixp4xx_pata_init);
|
|
|
|
module_exit(ixp4xx_pata_exit);
|