OpenCloudOS-Kernel/drivers/gpu/drm/imx/ipuv3-crtc.c

496 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* i.MX IPUv3 Graphics driver
*
* Copyright (C) 2011 Sascha Hauer, Pengutronix
*/
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 05:03:34 +08:00
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 05:03:34 +08:00
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <video/imx-ipu-v3.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_fb_cma_helper.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 05:03:34 +08:00
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
#include "imx-drm.h"
#include "ipuv3-plane.h"
#define DRIVER_DESC "i.MX IPUv3 Graphics"
struct ipu_crtc {
struct device *dev;
struct drm_crtc base;
/* plane[0] is the full plane, plane[1] is the partial plane */
struct ipu_plane *plane[2];
struct ipu_dc *dc;
struct ipu_di *di;
int irq;
struct drm_pending_vblank_event *event;
};
static inline struct ipu_crtc *to_ipu_crtc(struct drm_crtc *crtc)
{
return container_of(crtc, struct ipu_crtc, base);
}
static void ipu_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
ipu_prg_enable(ipu);
ipu_dc_enable(ipu);
ipu_dc_enable_channel(ipu_crtc->dc);
ipu_di_enable(ipu_crtc->di);
}
static void ipu_crtc_disable_planes(struct ipu_crtc *ipu_crtc,
struct drm_crtc_state *old_crtc_state)
{
bool disable_partial = false;
bool disable_full = false;
struct drm_plane *plane;
drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) {
if (plane == &ipu_crtc->plane[0]->base)
disable_full = true;
if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
disable_partial = true;
}
if (disable_partial)
ipu_plane_disable(ipu_crtc->plane[1], true);
if (disable_full)
ipu_plane_disable(ipu_crtc->plane[0], true);
}
static void ipu_crtc_atomic_disable(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
ipu_dc_disable_channel(ipu_crtc->dc);
ipu_di_disable(ipu_crtc->di);
/*
* Planes must be disabled before DC clock is removed, as otherwise the
* attached IDMACs will be left in undefined state, possibly hanging
* the IPU or even system.
*/
ipu_crtc_disable_planes(ipu_crtc, old_crtc_state);
ipu_dc_disable(ipu);
ipu_prg_disable(ipu);
drm_crtc_vblank_off(crtc);
spin_lock_irq(&crtc->dev->event_lock);
if (crtc->state->event && !crtc->state->active) {
drm_crtc_send_vblank_event(crtc, crtc->state->event);
crtc->state->event = NULL;
}
spin_unlock_irq(&crtc->dev->event_lock);
}
static void imx_drm_crtc_reset(struct drm_crtc *crtc)
{
struct imx_crtc_state *state;
if (crtc->state)
__drm_atomic_helper_crtc_destroy_state(crtc->state);
kfree(to_imx_crtc_state(crtc->state));
crtc->state = NULL;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (state)
__drm_atomic_helper_crtc_reset(crtc, &state->base);
}
static struct drm_crtc_state *imx_drm_crtc_duplicate_state(struct drm_crtc *crtc)
{
struct imx_crtc_state *state;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return NULL;
__drm_atomic_helper_crtc_duplicate_state(crtc, &state->base);
WARN_ON(state->base.crtc != crtc);
state->base.crtc = crtc;
return &state->base;
}
static void imx_drm_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
__drm_atomic_helper_crtc_destroy_state(state);
kfree(to_imx_crtc_state(state));
}
static int ipu_enable_vblank(struct drm_crtc *crtc)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
enable_irq(ipu_crtc->irq);
return 0;
}
static void ipu_disable_vblank(struct drm_crtc *crtc)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
disable_irq_nosync(ipu_crtc->irq);
}
static const struct drm_crtc_funcs ipu_crtc_funcs = {
.set_config = drm_atomic_helper_set_config,
.destroy = drm_crtc_cleanup,
.page_flip = drm_atomic_helper_page_flip,
.reset = imx_drm_crtc_reset,
.atomic_duplicate_state = imx_drm_crtc_duplicate_state,
.atomic_destroy_state = imx_drm_crtc_destroy_state,
.enable_vblank = ipu_enable_vblank,
.disable_vblank = ipu_disable_vblank,
};
static irqreturn_t ipu_irq_handler(int irq, void *dev_id)
{
struct ipu_crtc *ipu_crtc = dev_id;
struct drm_crtc *crtc = &ipu_crtc->base;
unsigned long flags;
int i;
drm_crtc_handle_vblank(crtc);
if (ipu_crtc->event) {
for (i = 0; i < ARRAY_SIZE(ipu_crtc->plane); i++) {
struct ipu_plane *plane = ipu_crtc->plane[i];
if (!plane)
continue;
if (ipu_plane_atomic_update_pending(&plane->base))
break;
}
if (i == ARRAY_SIZE(ipu_crtc->plane)) {
spin_lock_irqsave(&crtc->dev->event_lock, flags);
drm_crtc_send_vblank_event(crtc, ipu_crtc->event);
ipu_crtc->event = NULL;
drm_crtc_vblank_put(crtc);
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
}
}
return IRQ_HANDLED;
}
static bool ipu_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct videomode vm;
int ret;
drm_display_mode_to_videomode(adjusted_mode, &vm);
ret = ipu_di_adjust_videomode(ipu_crtc->di, &vm);
if (ret)
return false;
if ((vm.vsync_len == 0) || (vm.hsync_len == 0))
return false;
drm_display_mode_from_videomode(&vm, adjusted_mode);
return true;
}
static int ipu_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
u32 primary_plane_mask = drm_plane_mask(crtc->primary);
if (state->active && (primary_plane_mask & state->plane_mask) == 0)
return -EINVAL;
return 0;
}
static void ipu_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
drm_crtc_vblank_on(crtc);
}
static void ipu_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
spin_lock_irq(&crtc->dev->event_lock);
if (crtc->state->event) {
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
WARN_ON(drm_crtc_vblank_get(crtc));
ipu_crtc->event = crtc->state->event;
crtc->state->event = NULL;
}
spin_unlock_irq(&crtc->dev->event_lock);
}
static void ipu_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_encoder *encoder;
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc->state);
struct ipu_di_signal_cfg sig_cfg = {};
unsigned long encoder_types = 0;
dev_dbg(ipu_crtc->dev, "%s: mode->hdisplay: %d\n", __func__,
mode->hdisplay);
dev_dbg(ipu_crtc->dev, "%s: mode->vdisplay: %d\n", __func__,
mode->vdisplay);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc)
encoder_types |= BIT(encoder->encoder_type);
}
dev_dbg(ipu_crtc->dev, "%s: attached to encoder types 0x%lx\n",
__func__, encoder_types);
/*
* If we have DAC or LDB, then we need the IPU DI clock to be
* the same as the LDB DI clock. For TVDAC, derive the IPU DI
* clock from 27 MHz TVE_DI clock, but allow to divide it.
*/
if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) |
BIT(DRM_MODE_ENCODER_LVDS)))
sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT;
else if (encoder_types & BIT(DRM_MODE_ENCODER_TVDAC))
sig_cfg.clkflags = IPU_DI_CLKMODE_EXT;
else
sig_cfg.clkflags = 0;
sig_cfg.enable_pol = !(imx_crtc_state->bus_flags & DRM_BUS_FLAG_DE_LOW);
/* Default to driving pixel data on negative clock edges */
sig_cfg.clk_pol = !!(imx_crtc_state->bus_flags &
DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE);
sig_cfg.bus_format = imx_crtc_state->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = imx_crtc_state->di_hsync_pin;
sig_cfg.vsync_pin = imx_crtc_state->di_vsync_pin;
drm_display_mode_to_videomode(mode, &sig_cfg.mode);
ipu_dc_init_sync(ipu_crtc->dc, ipu_crtc->di,
mode->flags & DRM_MODE_FLAG_INTERLACE,
imx_crtc_state->bus_format, mode->hdisplay);
ipu_di_init_sync_panel(ipu_crtc->di, &sig_cfg);
}
static const struct drm_crtc_helper_funcs ipu_helper_funcs = {
.mode_fixup = ipu_crtc_mode_fixup,
.mode_set_nofb = ipu_crtc_mode_set_nofb,
.atomic_check = ipu_crtc_atomic_check,
.atomic_begin = ipu_crtc_atomic_begin,
.atomic_flush = ipu_crtc_atomic_flush,
.atomic_disable = ipu_crtc_atomic_disable,
.atomic_enable = ipu_crtc_atomic_enable,
};
static void ipu_put_resources(struct ipu_crtc *ipu_crtc)
{
if (!IS_ERR_OR_NULL(ipu_crtc->dc))
ipu_dc_put(ipu_crtc->dc);
if (!IS_ERR_OR_NULL(ipu_crtc->di))
ipu_di_put(ipu_crtc->di);
}
static int ipu_get_resources(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int ret;
ipu_crtc->dc = ipu_dc_get(ipu, pdata->dc);
if (IS_ERR(ipu_crtc->dc)) {
ret = PTR_ERR(ipu_crtc->dc);
goto err_out;
}
ipu_crtc->di = ipu_di_get(ipu, pdata->di);
if (IS_ERR(ipu_crtc->di)) {
ret = PTR_ERR(ipu_crtc->di);
goto err_out;
}
return 0;
err_out:
ipu_put_resources(ipu_crtc);
return ret;
}
static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata, struct drm_device *drm)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
struct drm_crtc *crtc = &ipu_crtc->base;
int dp = -EINVAL;
int ret;
ret = ipu_get_resources(ipu_crtc, pdata);
if (ret) {
dev_err(ipu_crtc->dev, "getting resources failed with %d.\n",
ret);
return ret;
}
if (pdata->dp >= 0)
dp = IPU_DP_FLOW_SYNC_BG;
ipu_crtc->plane[0] = ipu_plane_init(drm, ipu, pdata->dma[0], dp, 0,
DRM_PLANE_TYPE_PRIMARY);
if (IS_ERR(ipu_crtc->plane[0])) {
ret = PTR_ERR(ipu_crtc->plane[0]);
goto err_put_resources;
}
crtc->port = pdata->of_node;
drm_crtc_helper_add(crtc, &ipu_helper_funcs);
drm_crtc_init_with_planes(drm, crtc, &ipu_crtc->plane[0]->base, NULL,
&ipu_crtc_funcs, NULL);
ret = ipu_plane_get_resources(ipu_crtc->plane[0]);
if (ret) {
dev_err(ipu_crtc->dev, "getting plane 0 resources failed with %d.\n",
ret);
goto err_put_resources;
}
/* If this crtc is using the DP, add an overlay plane */
if (pdata->dp >= 0 && pdata->dma[1] > 0) {
ipu_crtc->plane[1] = ipu_plane_init(drm, ipu, pdata->dma[1],
IPU_DP_FLOW_SYNC_FG,
drm_crtc_mask(&ipu_crtc->base),
DRM_PLANE_TYPE_OVERLAY);
if (IS_ERR(ipu_crtc->plane[1])) {
ipu_crtc->plane[1] = NULL;
} else {
ret = ipu_plane_get_resources(ipu_crtc->plane[1]);
if (ret) {
dev_err(ipu_crtc->dev, "getting plane 1 "
"resources failed with %d.\n", ret);
goto err_put_plane0_res;
}
}
}
ipu_crtc->irq = ipu_plane_irq(ipu_crtc->plane[0]);
ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
"imx_drm", ipu_crtc);
if (ret < 0) {
dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
goto err_put_plane1_res;
}
/* Only enable IRQ when we actually need it to trigger work. */
disable_irq(ipu_crtc->irq);
return 0;
err_put_plane1_res:
if (ipu_crtc->plane[1])
ipu_plane_put_resources(ipu_crtc->plane[1]);
err_put_plane0_res:
ipu_plane_put_resources(ipu_crtc->plane[0]);
err_put_resources:
ipu_put_resources(ipu_crtc);
return ret;
}
static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
{
struct ipu_client_platformdata *pdata = dev->platform_data;
struct drm_device *drm = data;
struct ipu_crtc *ipu_crtc;
ipu_crtc = dev_get_drvdata(dev);
memset(ipu_crtc, 0, sizeof(*ipu_crtc));
ipu_crtc->dev = dev;
return ipu_crtc_init(ipu_crtc, pdata, drm);
}
static void ipu_drm_unbind(struct device *dev, struct device *master,
void *data)
{
struct ipu_crtc *ipu_crtc = dev_get_drvdata(dev);
ipu_put_resources(ipu_crtc);
if (ipu_crtc->plane[1])
ipu_plane_put_resources(ipu_crtc->plane[1]);
ipu_plane_put_resources(ipu_crtc->plane[0]);
}
static const struct component_ops ipu_crtc_ops = {
.bind = ipu_drm_bind,
.unbind = ipu_drm_unbind,
};
static int ipu_drm_probe(struct platform_device *pdev)
{
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 17:20:52 +08:00
struct device *dev = &pdev->dev;
struct ipu_crtc *ipu_crtc;
int ret;
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 17:20:52 +08:00
if (!dev->platform_data)
return -EINVAL;
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 17:20:52 +08:00
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
ipu_crtc = devm_kzalloc(dev, sizeof(*ipu_crtc), GFP_KERNEL);
if (!ipu_crtc)
return -ENOMEM;
dev_set_drvdata(dev, ipu_crtc);
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 17:20:52 +08:00
return component_add(dev, &ipu_crtc_ops);
}
static int ipu_drm_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &ipu_crtc_ops);
return 0;
}
struct platform_driver ipu_drm_driver = {
.driver = {
.name = "imx-ipuv3-crtc",
},
.probe = ipu_drm_probe,
.remove = ipu_drm_remove,
};