OpenCloudOS-Kernel/net/sunrpc/auth_generic.c

291 lines
7.7 KiB
C
Raw Normal View History

/*
* Generic RPC credential
*
* Copyright (C) 2008, Trond Myklebust <Trond.Myklebust@netapp.com>
*/
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/sunrpc/auth.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/debug.h>
#include <linux/sunrpc/sched.h>
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
# define RPCDBG_FACILITY RPCDBG_AUTH
#endif
#define RPC_MACHINE_CRED_USERID GLOBAL_ROOT_UID
#define RPC_MACHINE_CRED_GROUPID GLOBAL_ROOT_GID
struct generic_cred {
struct rpc_cred gc_base;
struct auth_cred acred;
};
static struct rpc_auth generic_auth;
static const struct rpc_credops generic_credops;
/*
* Public call interface
*/
struct rpc_cred *rpc_lookup_cred(void)
{
return rpcauth_lookupcred(&generic_auth, 0);
}
EXPORT_SYMBOL_GPL(rpc_lookup_cred);
struct rpc_cred *
rpc_lookup_generic_cred(struct auth_cred *acred, int flags, gfp_t gfp)
{
return rpcauth_lookup_credcache(&generic_auth, acred, flags, gfp);
}
EXPORT_SYMBOL_GPL(rpc_lookup_generic_cred);
struct rpc_cred *rpc_lookup_cred_nonblock(void)
{
return rpcauth_lookupcred(&generic_auth, RPCAUTH_LOOKUP_RCU);
}
EXPORT_SYMBOL_GPL(rpc_lookup_cred_nonblock);
/*
* Public call interface for looking up machine creds.
*/
struct rpc_cred *rpc_lookup_machine_cred(const char *service_name)
{
struct auth_cred acred = {
.uid = RPC_MACHINE_CRED_USERID,
.gid = RPC_MACHINE_CRED_GROUPID,
.principal = service_name,
.machine_cred = 1,
};
dprintk("RPC: looking up machine cred for service %s\n",
service_name);
return generic_auth.au_ops->lookup_cred(&generic_auth, &acred, 0);
}
EXPORT_SYMBOL_GPL(rpc_lookup_machine_cred);
static struct rpc_cred *generic_bind_cred(struct rpc_task *task,
struct rpc_cred *cred, int lookupflags)
{
struct rpc_auth *auth = task->tk_client->cl_auth;
struct auth_cred *acred = &container_of(cred, struct generic_cred, gc_base)->acred;
return auth->au_ops->lookup_cred(auth, acred, lookupflags);
}
/*
* Lookup generic creds for current process
*/
static struct rpc_cred *
generic_lookup_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags)
{
return rpcauth_lookup_credcache(&generic_auth, acred, flags, GFP_KERNEL);
}
static struct rpc_cred *
generic_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags, gfp_t gfp)
{
struct generic_cred *gcred;
gcred = kmalloc(sizeof(*gcred), gfp);
if (gcred == NULL)
return ERR_PTR(-ENOMEM);
rpcauth_init_cred(&gcred->gc_base, acred, &generic_auth, &generic_credops);
gcred->gc_base.cr_flags = 1UL << RPCAUTH_CRED_UPTODATE;
gcred->acred.uid = acred->uid;
gcred->acred.gid = acred->gid;
gcred->acred.group_info = acred->group_info;
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
gcred->acred.ac_flags = 0;
if (gcred->acred.group_info != NULL)
get_group_info(gcred->acred.group_info);
gcred->acred.machine_cred = acred->machine_cred;
gcred->acred.principal = acred->principal;
dprintk("RPC: allocated %s cred %p for uid %d gid %d\n",
gcred->acred.machine_cred ? "machine" : "generic",
gcred,
from_kuid(&init_user_ns, acred->uid),
from_kgid(&init_user_ns, acred->gid));
return &gcred->gc_base;
}
static void
generic_free_cred(struct rpc_cred *cred)
{
struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base);
dprintk("RPC: generic_free_cred %p\n", gcred);
if (gcred->acred.group_info != NULL)
put_group_info(gcred->acred.group_info);
kfree(gcred);
}
static void
generic_free_cred_callback(struct rcu_head *head)
{
struct rpc_cred *cred = container_of(head, struct rpc_cred, cr_rcu);
generic_free_cred(cred);
}
static void
generic_destroy_cred(struct rpc_cred *cred)
{
call_rcu(&cred->cr_rcu, generic_free_cred_callback);
}
static int
machine_cred_match(struct auth_cred *acred, struct generic_cred *gcred, int flags)
{
if (!gcred->acred.machine_cred ||
gcred->acred.principal != acred->principal ||
!uid_eq(gcred->acred.uid, acred->uid) ||
!gid_eq(gcred->acred.gid, acred->gid))
return 0;
return 1;
}
/*
* Match credentials against current process creds.
*/
static int
generic_match(struct auth_cred *acred, struct rpc_cred *cred, int flags)
{
struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base);
int i;
if (acred->machine_cred)
return machine_cred_match(acred, gcred, flags);
if (!uid_eq(gcred->acred.uid, acred->uid) ||
!gid_eq(gcred->acred.gid, acred->gid) ||
gcred->acred.machine_cred != 0)
goto out_nomatch;
/* Optimisation in the case where pointers are identical... */
if (gcred->acred.group_info == acred->group_info)
goto out_match;
/* Slow path... */
if (gcred->acred.group_info->ngroups != acred->group_info->ngroups)
goto out_nomatch;
for (i = 0; i < gcred->acred.group_info->ngroups; i++) {
if (!gid_eq(GROUP_AT(gcred->acred.group_info, i),
GROUP_AT(acred->group_info, i)))
goto out_nomatch;
}
out_match:
return 1;
out_nomatch:
return 0;
}
int __init rpc_init_generic_auth(void)
{
return rpcauth_init_credcache(&generic_auth);
}
void rpc_destroy_generic_auth(void)
{
rpcauth_destroy_credcache(&generic_auth);
}
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
/*
* Test the the current time (now) against the underlying credential key expiry
* minus a timeout and setup notification.
*
* The normal case:
* If 'now' is before the key expiry minus RPC_KEY_EXPIRE_TIMEO, set
* the RPC_CRED_NOTIFY_TIMEOUT flag to setup the underlying credential
* rpc_credops crmatch routine to notify this generic cred when it's key
* expiration is within RPC_KEY_EXPIRE_TIMEO, and return 0.
*
* The error case:
* If the underlying cred lookup fails, return -EACCES.
*
* The 'almost' error case:
* If 'now' is within key expiry minus RPC_KEY_EXPIRE_TIMEO, but not within
* key expiry minus RPC_KEY_EXPIRE_FAIL, set the RPC_CRED_EXPIRE_SOON bit
* on the acred ac_flags and return 0.
*/
static int
generic_key_timeout(struct rpc_auth *auth, struct rpc_cred *cred)
{
struct auth_cred *acred = &container_of(cred, struct generic_cred,
gc_base)->acred;
struct rpc_cred *tcred;
int ret = 0;
/* Fast track for non crkey_timeout (no key) underlying credentials */
sunrpc: move NO_CRKEY_TIMEOUT to the auth->au_flags A generic_cred can be used to look up a unx_cred or a gss_cred, so it's not really safe to use the the generic_cred->acred->ac_flags to store the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated with the auth_cred to be in a state where they're perpetually doing 4K NFS_FILE_SYNC writes. This can be reproduced as follows: 1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys. They do not need to be the same export, nor do they even need to be from the same NFS server. Also, v3 is fine. $ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5 $ sudo mount -o v3,sec=sys server2:/export /mnt/sys 2. As the normal user, before accessing the kerberized mount, kinit with a short lifetime (but not so short that renewing the ticket would leave you within the 4-minute window again by the time the original ticket expires), e.g. $ kinit -l 10m -r 60m 3. Do some I/O to the kerberized mount and verify that the writes are wsize, UNSTABLE: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 4. Wait until you're within 4 minutes of key expiry, then do some more I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets set. Verify that the writes are 4K, FILE_SYNC: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 5. Now do some I/O to the sec=sys mount. This will cause RPC_CRED_NO_CRKEY_TIMEOUT to be set: $ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1 6. Writes for that user will now be permanently 4K, FILE_SYNC for that user, regardless of which mount is being written to, until you reboot the client. Renewing the kerberos ticket (assuming it hasn't already expired) will have no effect. Grabbing a new kerberos ticket at this point will have no effect either. Move the flag to the auth->au_flags field (which is currently unused) and rename it slightly to reflect that it's no longer associated with the auth_cred->ac_flags. Add the rpc_auth to the arg list of rpcauth_cred_key_to_expire and check the au_flags there too. Finally, add the inode to the arg list of nfs_ctx_key_to_expire so we can determine the rpc_auth to pass to rpcauth_cred_key_to_expire. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-06-08 03:14:48 +08:00
if (auth->au_flags & RPCAUTH_AUTH_NO_CRKEY_TIMEOUT)
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
return 0;
/* Fast track for the normal case */
if (test_bit(RPC_CRED_NOTIFY_TIMEOUT, &acred->ac_flags))
return 0;
/* lookup_cred either returns a valid referenced rpc_cred, or PTR_ERR */
tcred = auth->au_ops->lookup_cred(auth, acred, 0);
if (IS_ERR(tcred))
return -EACCES;
/* Test for the almost error case */
ret = tcred->cr_ops->crkey_timeout(tcred);
if (ret != 0) {
set_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
ret = 0;
} else {
/* In case underlying cred key has been reset */
if (test_and_clear_bit(RPC_CRED_KEY_EXPIRE_SOON,
&acred->ac_flags))
dprintk("RPC: UID %d Credential key reset\n",
from_kuid(&init_user_ns, tcred->cr_uid));
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
/* set up fasttrack for the normal case */
set_bit(RPC_CRED_NOTIFY_TIMEOUT, &acred->ac_flags);
}
put_rpccred(tcred);
return ret;
}
static const struct rpc_authops generic_auth_ops = {
.owner = THIS_MODULE,
.au_name = "Generic",
.lookup_cred = generic_lookup_cred,
.crcreate = generic_create_cred,
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
.key_timeout = generic_key_timeout,
};
static struct rpc_auth generic_auth = {
.au_ops = &generic_auth_ops,
.au_count = ATOMIC_INIT(0),
};
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
static bool generic_key_to_expire(struct rpc_cred *cred)
{
struct auth_cred *acred = &container_of(cred, struct generic_cred,
gc_base)->acred;
bool ret;
get_rpccred(cred);
ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
put_rpccred(cred);
return ret;
}
static const struct rpc_credops generic_credops = {
.cr_name = "Generic cred",
.crdestroy = generic_destroy_cred,
.crbind = generic_bind_cred,
.crmatch = generic_match,
SUNRPC new rpc_credops to test credential expiry This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-14 23:59:15 +08:00
.crkey_to_expire = generic_key_to_expire,
};