OpenCloudOS-Kernel/net/can/gw.c

1043 lines
26 KiB
C
Raw Normal View History

/*
* gw.c - CAN frame Gateway/Router/Bridge with netlink interface
*
* Copyright (c) 2011 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
#include <linux/rculist.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#include <linux/can.h>
#include <linux/can/core.h>
#include <linux/can/skb.h>
#include <linux/can/gw.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#define CAN_GW_VERSION "20130117"
#define CAN_GW_NAME "can-gw"
MODULE_DESCRIPTION("PF_CAN netlink gateway");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
MODULE_ALIAS(CAN_GW_NAME);
#define CGW_MIN_HOPS 1
#define CGW_MAX_HOPS 6
#define CGW_DEFAULT_HOPS 1
static unsigned int max_hops __read_mostly = CGW_DEFAULT_HOPS;
module_param(max_hops, uint, S_IRUGO);
MODULE_PARM_DESC(max_hops,
"maximum " CAN_GW_NAME " routing hops for CAN frames "
"(valid values: " __stringify(CGW_MIN_HOPS) "-"
__stringify(CGW_MAX_HOPS) " hops, "
"default: " __stringify(CGW_DEFAULT_HOPS) ")");
static HLIST_HEAD(cgw_list);
static struct notifier_block notifier;
static struct kmem_cache *cgw_cache __read_mostly;
/* structure that contains the (on-the-fly) CAN frame modifications */
struct cf_mod {
struct {
struct can_frame and;
struct can_frame or;
struct can_frame xor;
struct can_frame set;
} modframe;
struct {
u8 and;
u8 or;
u8 xor;
u8 set;
} modtype;
void (*modfunc[MAX_MODFUNCTIONS])(struct can_frame *cf,
struct cf_mod *mod);
/* CAN frame checksum calculation after CAN frame modifications */
struct {
struct cgw_csum_xor xor;
struct cgw_csum_crc8 crc8;
} csum;
struct {
void (*xor)(struct can_frame *cf, struct cgw_csum_xor *xor);
void (*crc8)(struct can_frame *cf, struct cgw_csum_crc8 *crc8);
} csumfunc;
u32 uid;
};
/*
* So far we just support CAN -> CAN routing and frame modifications.
*
* The internal can_can_gw structure contains data and attributes for
* a CAN -> CAN gateway job.
*/
struct can_can_gw {
struct can_filter filter;
int src_idx;
int dst_idx;
};
/* list entry for CAN gateways jobs */
struct cgw_job {
struct hlist_node list;
struct rcu_head rcu;
u32 handled_frames;
u32 dropped_frames;
u32 deleted_frames;
struct cf_mod mod;
union {
/* CAN frame data source */
struct net_device *dev;
} src;
union {
/* CAN frame data destination */
struct net_device *dev;
} dst;
union {
struct can_can_gw ccgw;
/* tbc */
};
u8 gwtype;
u8 limit_hops;
u16 flags;
};
/* modification functions that are invoked in the hot path in can_can_gw_rcv */
#define MODFUNC(func, op) static void func(struct can_frame *cf, \
struct cf_mod *mod) { op ; }
MODFUNC(mod_and_id, cf->can_id &= mod->modframe.and.can_id)
MODFUNC(mod_and_dlc, cf->can_dlc &= mod->modframe.and.can_dlc)
MODFUNC(mod_and_data, *(u64 *)cf->data &= *(u64 *)mod->modframe.and.data)
MODFUNC(mod_or_id, cf->can_id |= mod->modframe.or.can_id)
MODFUNC(mod_or_dlc, cf->can_dlc |= mod->modframe.or.can_dlc)
MODFUNC(mod_or_data, *(u64 *)cf->data |= *(u64 *)mod->modframe.or.data)
MODFUNC(mod_xor_id, cf->can_id ^= mod->modframe.xor.can_id)
MODFUNC(mod_xor_dlc, cf->can_dlc ^= mod->modframe.xor.can_dlc)
MODFUNC(mod_xor_data, *(u64 *)cf->data ^= *(u64 *)mod->modframe.xor.data)
MODFUNC(mod_set_id, cf->can_id = mod->modframe.set.can_id)
MODFUNC(mod_set_dlc, cf->can_dlc = mod->modframe.set.can_dlc)
MODFUNC(mod_set_data, *(u64 *)cf->data = *(u64 *)mod->modframe.set.data)
static inline void canframecpy(struct can_frame *dst, struct can_frame *src)
{
/*
* Copy the struct members separately to ensure that no uninitialized
* data are copied in the 3 bytes hole of the struct. This is needed
* to make easy compares of the data in the struct cf_mod.
*/
dst->can_id = src->can_id;
dst->can_dlc = src->can_dlc;
*(u64 *)dst->data = *(u64 *)src->data;
}
static int cgw_chk_csum_parms(s8 fr, s8 to, s8 re)
{
/*
* absolute dlc values 0 .. 7 => 0 .. 7, e.g. data [0]
* relative to received dlc -1 .. -8 :
* e.g. for received dlc = 8
* -1 => index = 7 (data[7])
* -3 => index = 5 (data[5])
* -8 => index = 0 (data[0])
*/
if (fr > -9 && fr < 8 &&
to > -9 && to < 8 &&
re > -9 && re < 8)
return 0;
else
return -EINVAL;
}
static inline int calc_idx(int idx, int rx_dlc)
{
if (idx < 0)
return rx_dlc + idx;
else
return idx;
}
static void cgw_csum_xor_rel(struct can_frame *cf, struct cgw_csum_xor *xor)
{
int from = calc_idx(xor->from_idx, cf->can_dlc);
int to = calc_idx(xor->to_idx, cf->can_dlc);
int res = calc_idx(xor->result_idx, cf->can_dlc);
u8 val = xor->init_xor_val;
int i;
if (from < 0 || to < 0 || res < 0)
return;
if (from <= to) {
for (i = from; i <= to; i++)
val ^= cf->data[i];
} else {
for (i = from; i >= to; i--)
val ^= cf->data[i];
}
cf->data[res] = val;
}
static void cgw_csum_xor_pos(struct can_frame *cf, struct cgw_csum_xor *xor)
{
u8 val = xor->init_xor_val;
int i;
for (i = xor->from_idx; i <= xor->to_idx; i++)
val ^= cf->data[i];
cf->data[xor->result_idx] = val;
}
static void cgw_csum_xor_neg(struct can_frame *cf, struct cgw_csum_xor *xor)
{
u8 val = xor->init_xor_val;
int i;
for (i = xor->from_idx; i >= xor->to_idx; i--)
val ^= cf->data[i];
cf->data[xor->result_idx] = val;
}
static void cgw_csum_crc8_rel(struct can_frame *cf, struct cgw_csum_crc8 *crc8)
{
int from = calc_idx(crc8->from_idx, cf->can_dlc);
int to = calc_idx(crc8->to_idx, cf->can_dlc);
int res = calc_idx(crc8->result_idx, cf->can_dlc);
u8 crc = crc8->init_crc_val;
int i;
if (from < 0 || to < 0 || res < 0)
return;
if (from <= to) {
for (i = crc8->from_idx; i <= crc8->to_idx; i++)
crc = crc8->crctab[crc^cf->data[i]];
} else {
for (i = crc8->from_idx; i >= crc8->to_idx; i--)
crc = crc8->crctab[crc^cf->data[i]];
}
switch (crc8->profile) {
case CGW_CRC8PRF_1U8:
crc = crc8->crctab[crc^crc8->profile_data[0]];
break;
case CGW_CRC8PRF_16U8:
crc = crc8->crctab[crc^crc8->profile_data[cf->data[1] & 0xF]];
break;
case CGW_CRC8PRF_SFFID_XOR:
crc = crc8->crctab[crc^(cf->can_id & 0xFF)^
(cf->can_id >> 8 & 0xFF)];
break;
}
cf->data[crc8->result_idx] = crc^crc8->final_xor_val;
}
static void cgw_csum_crc8_pos(struct can_frame *cf, struct cgw_csum_crc8 *crc8)
{
u8 crc = crc8->init_crc_val;
int i;
for (i = crc8->from_idx; i <= crc8->to_idx; i++)
crc = crc8->crctab[crc^cf->data[i]];
switch (crc8->profile) {
case CGW_CRC8PRF_1U8:
crc = crc8->crctab[crc^crc8->profile_data[0]];
break;
case CGW_CRC8PRF_16U8:
crc = crc8->crctab[crc^crc8->profile_data[cf->data[1] & 0xF]];
break;
case CGW_CRC8PRF_SFFID_XOR:
crc = crc8->crctab[crc^(cf->can_id & 0xFF)^
(cf->can_id >> 8 & 0xFF)];
break;
}
cf->data[crc8->result_idx] = crc^crc8->final_xor_val;
}
static void cgw_csum_crc8_neg(struct can_frame *cf, struct cgw_csum_crc8 *crc8)
{
u8 crc = crc8->init_crc_val;
int i;
for (i = crc8->from_idx; i >= crc8->to_idx; i--)
crc = crc8->crctab[crc^cf->data[i]];
switch (crc8->profile) {
case CGW_CRC8PRF_1U8:
crc = crc8->crctab[crc^crc8->profile_data[0]];
break;
case CGW_CRC8PRF_16U8:
crc = crc8->crctab[crc^crc8->profile_data[cf->data[1] & 0xF]];
break;
case CGW_CRC8PRF_SFFID_XOR:
crc = crc8->crctab[crc^(cf->can_id & 0xFF)^
(cf->can_id >> 8 & 0xFF)];
break;
}
cf->data[crc8->result_idx] = crc^crc8->final_xor_val;
}
/* the receive & process & send function */
static void can_can_gw_rcv(struct sk_buff *skb, void *data)
{
struct cgw_job *gwj = (struct cgw_job *)data;
struct can_frame *cf;
struct sk_buff *nskb;
int modidx = 0;
/*
* Do not handle CAN frames routed more than 'max_hops' times.
* In general we should never catch this delimiter which is intended
* to cover a misconfiguration protection (e.g. circular CAN routes).
*
* The Controller Area Network controllers only accept CAN frames with
* correct CRCs - which are not visible in the controller registers.
* According to skbuff.h documentation the csum_start element for IP
* checksums is undefined/unused when ip_summed == CHECKSUM_UNNECESSARY.
* Only CAN skbs can be processed here which already have this property.
*/
#define cgw_hops(skb) ((skb)->csum_start)
BUG_ON(skb->ip_summed != CHECKSUM_UNNECESSARY);
if (cgw_hops(skb) >= max_hops) {
/* indicate deleted frames due to misconfiguration */
gwj->deleted_frames++;
return;
}
if (!(gwj->dst.dev->flags & IFF_UP)) {
gwj->dropped_frames++;
return;
}
/* is sending the skb back to the incoming interface not allowed? */
if (!(gwj->flags & CGW_FLAGS_CAN_IIF_TX_OK) &&
can_skb_prv(skb)->ifindex == gwj->dst.dev->ifindex)
return;
/*
* clone the given skb, which has not been done in can_rcv()
*
* When there is at least one modification function activated,
* we need to copy the skb as we want to modify skb->data.
*/
if (gwj->mod.modfunc[0])
nskb = skb_copy(skb, GFP_ATOMIC);
else
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb) {
gwj->dropped_frames++;
return;
}
/* put the incremented hop counter in the cloned skb */
cgw_hops(nskb) = cgw_hops(skb) + 1;
/* first processing of this CAN frame -> adjust to private hop limit */
if (gwj->limit_hops && cgw_hops(nskb) == 1)
cgw_hops(nskb) = max_hops - gwj->limit_hops + 1;
nskb->dev = gwj->dst.dev;
/* pointer to modifiable CAN frame */
cf = (struct can_frame *)nskb->data;
/* perform preprocessed modification functions if there are any */
while (modidx < MAX_MODFUNCTIONS && gwj->mod.modfunc[modidx])
(*gwj->mod.modfunc[modidx++])(cf, &gwj->mod);
/* check for checksum updates when the CAN frame has been modified */
if (modidx) {
if (gwj->mod.csumfunc.crc8)
(*gwj->mod.csumfunc.crc8)(cf, &gwj->mod.csum.crc8);
if (gwj->mod.csumfunc.xor)
(*gwj->mod.csumfunc.xor)(cf, &gwj->mod.csum.xor);
}
/* clear the skb timestamp if not configured the other way */
if (!(gwj->flags & CGW_FLAGS_CAN_SRC_TSTAMP))
nskb->tstamp.tv64 = 0;
/* send to netdevice */
if (can_send(nskb, gwj->flags & CGW_FLAGS_CAN_ECHO))
gwj->dropped_frames++;
else
gwj->handled_frames++;
}
static inline int cgw_register_filter(struct cgw_job *gwj)
{
return can_rx_register(gwj->src.dev, gwj->ccgw.filter.can_id,
gwj->ccgw.filter.can_mask, can_can_gw_rcv,
gwj, "gw");
}
static inline void cgw_unregister_filter(struct cgw_job *gwj)
{
can_rx_unregister(gwj->src.dev, gwj->ccgw.filter.can_id,
gwj->ccgw.filter.can_mask, can_can_gw_rcv, gwj);
}
static int cgw_notifier(struct notifier_block *nb,
unsigned long msg, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
if (!net_eq(dev_net(dev), &init_net))
return NOTIFY_DONE;
if (dev->type != ARPHRD_CAN)
return NOTIFY_DONE;
if (msg == NETDEV_UNREGISTER) {
struct cgw_job *gwj = NULL;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
struct hlist_node *nx;
ASSERT_RTNL();
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) {
if (gwj->src.dev == dev || gwj->dst.dev == dev) {
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
kmem_cache_free(cgw_cache, gwj);
}
}
}
return NOTIFY_DONE;
}
static int cgw_put_job(struct sk_buff *skb, struct cgw_job *gwj, int type,
u32 pid, u32 seq, int flags)
{
struct cgw_frame_mod mb;
struct rtcanmsg *rtcan;
struct nlmsghdr *nlh;
nlh = nlmsg_put(skb, pid, seq, type, sizeof(*rtcan), flags);
if (!nlh)
return -EMSGSIZE;
rtcan = nlmsg_data(nlh);
rtcan->can_family = AF_CAN;
rtcan->gwtype = gwj->gwtype;
rtcan->flags = gwj->flags;
/* add statistics if available */
if (gwj->handled_frames) {
if (nla_put_u32(skb, CGW_HANDLED, gwj->handled_frames) < 0)
goto cancel;
}
if (gwj->dropped_frames) {
if (nla_put_u32(skb, CGW_DROPPED, gwj->dropped_frames) < 0)
goto cancel;
}
if (gwj->deleted_frames) {
if (nla_put_u32(skb, CGW_DELETED, gwj->deleted_frames) < 0)
goto cancel;
}
/* check non default settings of attributes */
if (gwj->limit_hops) {
if (nla_put_u8(skb, CGW_LIM_HOPS, gwj->limit_hops) < 0)
goto cancel;
}
if (gwj->mod.modtype.and) {
memcpy(&mb.cf, &gwj->mod.modframe.and, sizeof(mb.cf));
mb.modtype = gwj->mod.modtype.and;
if (nla_put(skb, CGW_MOD_AND, sizeof(mb), &mb) < 0)
goto cancel;
}
if (gwj->mod.modtype.or) {
memcpy(&mb.cf, &gwj->mod.modframe.or, sizeof(mb.cf));
mb.modtype = gwj->mod.modtype.or;
if (nla_put(skb, CGW_MOD_OR, sizeof(mb), &mb) < 0)
goto cancel;
}
if (gwj->mod.modtype.xor) {
memcpy(&mb.cf, &gwj->mod.modframe.xor, sizeof(mb.cf));
mb.modtype = gwj->mod.modtype.xor;
if (nla_put(skb, CGW_MOD_XOR, sizeof(mb), &mb) < 0)
goto cancel;
}
if (gwj->mod.modtype.set) {
memcpy(&mb.cf, &gwj->mod.modframe.set, sizeof(mb.cf));
mb.modtype = gwj->mod.modtype.set;
if (nla_put(skb, CGW_MOD_SET, sizeof(mb), &mb) < 0)
goto cancel;
}
if (gwj->mod.uid) {
if (nla_put_u32(skb, CGW_MOD_UID, gwj->mod.uid) < 0)
goto cancel;
}
if (gwj->mod.csumfunc.crc8) {
if (nla_put(skb, CGW_CS_CRC8, CGW_CS_CRC8_LEN,
&gwj->mod.csum.crc8) < 0)
goto cancel;
}
if (gwj->mod.csumfunc.xor) {
if (nla_put(skb, CGW_CS_XOR, CGW_CS_XOR_LEN,
&gwj->mod.csum.xor) < 0)
goto cancel;
}
if (gwj->gwtype == CGW_TYPE_CAN_CAN) {
if (gwj->ccgw.filter.can_id || gwj->ccgw.filter.can_mask) {
if (nla_put(skb, CGW_FILTER, sizeof(struct can_filter),
&gwj->ccgw.filter) < 0)
goto cancel;
}
if (nla_put_u32(skb, CGW_SRC_IF, gwj->ccgw.src_idx) < 0)
goto cancel;
if (nla_put_u32(skb, CGW_DST_IF, gwj->ccgw.dst_idx) < 0)
goto cancel;
}
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 05:09:00 +08:00
nlmsg_end(skb, nlh);
return 0;
cancel:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
/* Dump information about all CAN gateway jobs, in response to RTM_GETROUTE */
static int cgw_dump_jobs(struct sk_buff *skb, struct netlink_callback *cb)
{
struct cgw_job *gwj = NULL;
int idx = 0;
int s_idx = cb->args[0];
rcu_read_lock();
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
hlist_for_each_entry_rcu(gwj, &cgw_list, list) {
if (idx < s_idx)
goto cont;
if (cgw_put_job(skb, gwj, RTM_NEWROUTE, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI) < 0)
break;
cont:
idx++;
}
rcu_read_unlock();
cb->args[0] = idx;
return skb->len;
}
static const struct nla_policy cgw_policy[CGW_MAX+1] = {
[CGW_MOD_AND] = { .len = sizeof(struct cgw_frame_mod) },
[CGW_MOD_OR] = { .len = sizeof(struct cgw_frame_mod) },
[CGW_MOD_XOR] = { .len = sizeof(struct cgw_frame_mod) },
[CGW_MOD_SET] = { .len = sizeof(struct cgw_frame_mod) },
[CGW_CS_XOR] = { .len = sizeof(struct cgw_csum_xor) },
[CGW_CS_CRC8] = { .len = sizeof(struct cgw_csum_crc8) },
[CGW_SRC_IF] = { .type = NLA_U32 },
[CGW_DST_IF] = { .type = NLA_U32 },
[CGW_FILTER] = { .len = sizeof(struct can_filter) },
[CGW_LIM_HOPS] = { .type = NLA_U8 },
[CGW_MOD_UID] = { .type = NLA_U32 },
};
/* check for common and gwtype specific attributes */
static int cgw_parse_attr(struct nlmsghdr *nlh, struct cf_mod *mod,
u8 gwtype, void *gwtypeattr, u8 *limhops)
{
struct nlattr *tb[CGW_MAX+1];
struct cgw_frame_mod mb;
int modidx = 0;
int err = 0;
/* initialize modification & checksum data space */
memset(mod, 0, sizeof(*mod));
err = nlmsg_parse(nlh, sizeof(struct rtcanmsg), tb, CGW_MAX,
cgw_policy);
if (err < 0)
return err;
if (tb[CGW_LIM_HOPS]) {
*limhops = nla_get_u8(tb[CGW_LIM_HOPS]);
if (*limhops < 1 || *limhops > max_hops)
return -EINVAL;
}
/* check for AND/OR/XOR/SET modifications */
if (tb[CGW_MOD_AND]) {
nla_memcpy(&mb, tb[CGW_MOD_AND], CGW_MODATTR_LEN);
canframecpy(&mod->modframe.and, &mb.cf);
mod->modtype.and = mb.modtype;
if (mb.modtype & CGW_MOD_ID)
mod->modfunc[modidx++] = mod_and_id;
if (mb.modtype & CGW_MOD_DLC)
mod->modfunc[modidx++] = mod_and_dlc;
if (mb.modtype & CGW_MOD_DATA)
mod->modfunc[modidx++] = mod_and_data;
}
if (tb[CGW_MOD_OR]) {
nla_memcpy(&mb, tb[CGW_MOD_OR], CGW_MODATTR_LEN);
canframecpy(&mod->modframe.or, &mb.cf);
mod->modtype.or = mb.modtype;
if (mb.modtype & CGW_MOD_ID)
mod->modfunc[modidx++] = mod_or_id;
if (mb.modtype & CGW_MOD_DLC)
mod->modfunc[modidx++] = mod_or_dlc;
if (mb.modtype & CGW_MOD_DATA)
mod->modfunc[modidx++] = mod_or_data;
}
if (tb[CGW_MOD_XOR]) {
nla_memcpy(&mb, tb[CGW_MOD_XOR], CGW_MODATTR_LEN);
canframecpy(&mod->modframe.xor, &mb.cf);
mod->modtype.xor = mb.modtype;
if (mb.modtype & CGW_MOD_ID)
mod->modfunc[modidx++] = mod_xor_id;
if (mb.modtype & CGW_MOD_DLC)
mod->modfunc[modidx++] = mod_xor_dlc;
if (mb.modtype & CGW_MOD_DATA)
mod->modfunc[modidx++] = mod_xor_data;
}
if (tb[CGW_MOD_SET]) {
nla_memcpy(&mb, tb[CGW_MOD_SET], CGW_MODATTR_LEN);
canframecpy(&mod->modframe.set, &mb.cf);
mod->modtype.set = mb.modtype;
if (mb.modtype & CGW_MOD_ID)
mod->modfunc[modidx++] = mod_set_id;
if (mb.modtype & CGW_MOD_DLC)
mod->modfunc[modidx++] = mod_set_dlc;
if (mb.modtype & CGW_MOD_DATA)
mod->modfunc[modidx++] = mod_set_data;
}
/* check for checksum operations after CAN frame modifications */
if (modidx) {
if (tb[CGW_CS_CRC8]) {
struct cgw_csum_crc8 *c = nla_data(tb[CGW_CS_CRC8]);
err = cgw_chk_csum_parms(c->from_idx, c->to_idx,
c->result_idx);
if (err)
return err;
nla_memcpy(&mod->csum.crc8, tb[CGW_CS_CRC8],
CGW_CS_CRC8_LEN);
/*
* select dedicated processing function to reduce
* runtime operations in receive hot path.
*/
if (c->from_idx < 0 || c->to_idx < 0 ||
c->result_idx < 0)
mod->csumfunc.crc8 = cgw_csum_crc8_rel;
else if (c->from_idx <= c->to_idx)
mod->csumfunc.crc8 = cgw_csum_crc8_pos;
else
mod->csumfunc.crc8 = cgw_csum_crc8_neg;
}
if (tb[CGW_CS_XOR]) {
struct cgw_csum_xor *c = nla_data(tb[CGW_CS_XOR]);
err = cgw_chk_csum_parms(c->from_idx, c->to_idx,
c->result_idx);
if (err)
return err;
nla_memcpy(&mod->csum.xor, tb[CGW_CS_XOR],
CGW_CS_XOR_LEN);
/*
* select dedicated processing function to reduce
* runtime operations in receive hot path.
*/
if (c->from_idx < 0 || c->to_idx < 0 ||
c->result_idx < 0)
mod->csumfunc.xor = cgw_csum_xor_rel;
else if (c->from_idx <= c->to_idx)
mod->csumfunc.xor = cgw_csum_xor_pos;
else
mod->csumfunc.xor = cgw_csum_xor_neg;
}
if (tb[CGW_MOD_UID]) {
nla_memcpy(&mod->uid, tb[CGW_MOD_UID], sizeof(u32));
}
}
if (gwtype == CGW_TYPE_CAN_CAN) {
/* check CGW_TYPE_CAN_CAN specific attributes */
struct can_can_gw *ccgw = (struct can_can_gw *)gwtypeattr;
memset(ccgw, 0, sizeof(*ccgw));
/* check for can_filter in attributes */
if (tb[CGW_FILTER])
nla_memcpy(&ccgw->filter, tb[CGW_FILTER],
sizeof(struct can_filter));
err = -ENODEV;
/* specifying two interfaces is mandatory */
if (!tb[CGW_SRC_IF] || !tb[CGW_DST_IF])
return err;
ccgw->src_idx = nla_get_u32(tb[CGW_SRC_IF]);
ccgw->dst_idx = nla_get_u32(tb[CGW_DST_IF]);
/* both indices set to 0 for flushing all routing entries */
if (!ccgw->src_idx && !ccgw->dst_idx)
return 0;
/* only one index set to 0 is an error */
if (!ccgw->src_idx || !ccgw->dst_idx)
return err;
}
/* add the checks for other gwtypes here */
return 0;
}
static int cgw_create_job(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct rtcanmsg *r;
struct cgw_job *gwj;
struct cf_mod mod;
struct can_can_gw ccgw;
u8 limhops = 0;
int err = 0;
if (!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
if (nlmsg_len(nlh) < sizeof(*r))
return -EINVAL;
r = nlmsg_data(nlh);
if (r->can_family != AF_CAN)
return -EPFNOSUPPORT;
/* so far we only support CAN -> CAN routings */
if (r->gwtype != CGW_TYPE_CAN_CAN)
return -EINVAL;
err = cgw_parse_attr(nlh, &mod, CGW_TYPE_CAN_CAN, &ccgw, &limhops);
if (err < 0)
return err;
if (mod.uid) {
ASSERT_RTNL();
/* check for updating an existing job with identical uid */
hlist_for_each_entry(gwj, &cgw_list, list) {
if (gwj->mod.uid != mod.uid)
continue;
/* interfaces & filters must be identical */
if (memcmp(&gwj->ccgw, &ccgw, sizeof(ccgw)))
return -EINVAL;
/* update modifications with disabled softirq & quit */
local_bh_disable();
memcpy(&gwj->mod, &mod, sizeof(mod));
local_bh_enable();
return 0;
}
}
/* ifindex == 0 is not allowed for job creation */
if (!ccgw.src_idx || !ccgw.dst_idx)
return -ENODEV;
gwj = kmem_cache_alloc(cgw_cache, GFP_KERNEL);
if (!gwj)
return -ENOMEM;
gwj->handled_frames = 0;
gwj->dropped_frames = 0;
gwj->deleted_frames = 0;
gwj->flags = r->flags;
gwj->gwtype = r->gwtype;
gwj->limit_hops = limhops;
/* insert already parsed information */
memcpy(&gwj->mod, &mod, sizeof(mod));
memcpy(&gwj->ccgw, &ccgw, sizeof(ccgw));
err = -ENODEV;
gwj->src.dev = __dev_get_by_index(&init_net, gwj->ccgw.src_idx);
if (!gwj->src.dev)
goto out;
if (gwj->src.dev->type != ARPHRD_CAN)
goto out;
gwj->dst.dev = __dev_get_by_index(&init_net, gwj->ccgw.dst_idx);
if (!gwj->dst.dev)
goto out;
if (gwj->dst.dev->type != ARPHRD_CAN)
goto out;
ASSERT_RTNL();
err = cgw_register_filter(gwj);
if (!err)
hlist_add_head_rcu(&gwj->list, &cgw_list);
out:
if (err)
kmem_cache_free(cgw_cache, gwj);
return err;
}
static void cgw_remove_all_jobs(void)
{
struct cgw_job *gwj = NULL;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
struct hlist_node *nx;
ASSERT_RTNL();
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) {
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
kmem_cache_free(cgw_cache, gwj);
}
}
static int cgw_remove_job(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct cgw_job *gwj = NULL;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
struct hlist_node *nx;
struct rtcanmsg *r;
struct cf_mod mod;
struct can_can_gw ccgw;
u8 limhops = 0;
int err = 0;
if (!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
if (nlmsg_len(nlh) < sizeof(*r))
return -EINVAL;
r = nlmsg_data(nlh);
if (r->can_family != AF_CAN)
return -EPFNOSUPPORT;
/* so far we only support CAN -> CAN routings */
if (r->gwtype != CGW_TYPE_CAN_CAN)
return -EINVAL;
err = cgw_parse_attr(nlh, &mod, CGW_TYPE_CAN_CAN, &ccgw, &limhops);
if (err < 0)
return err;
/* two interface indices both set to 0 => remove all entries */
if (!ccgw.src_idx && !ccgw.dst_idx) {
cgw_remove_all_jobs();
return 0;
}
err = -EINVAL;
ASSERT_RTNL();
/* remove only the first matching entry */
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) {
if (gwj->flags != r->flags)
continue;
if (gwj->limit_hops != limhops)
continue;
/* we have a match when uid is enabled and identical */
if (gwj->mod.uid || mod.uid) {
if (gwj->mod.uid != mod.uid)
continue;
} else {
/* no uid => check for identical modifications */
if (memcmp(&gwj->mod, &mod, sizeof(mod)))
continue;
}
/* if (r->gwtype == CGW_TYPE_CAN_CAN) - is made sure here */
if (memcmp(&gwj->ccgw, &ccgw, sizeof(ccgw)))
continue;
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
kmem_cache_free(cgw_cache, gwj);
err = 0;
break;
}
return err;
}
static __init int cgw_module_init(void)
{
/* sanitize given module parameter */
max_hops = clamp_t(unsigned int, max_hops, CGW_MIN_HOPS, CGW_MAX_HOPS);
pr_info("can: netlink gateway (rev " CAN_GW_VERSION ") max_hops=%d\n",
max_hops);
cgw_cache = kmem_cache_create("can_gw", sizeof(struct cgw_job),
0, 0, NULL);
if (!cgw_cache)
return -ENOMEM;
/* set notifier */
notifier.notifier_call = cgw_notifier;
register_netdevice_notifier(&notifier);
if (__rtnl_register(PF_CAN, RTM_GETROUTE, NULL, cgw_dump_jobs, NULL)) {
unregister_netdevice_notifier(&notifier);
kmem_cache_destroy(cgw_cache);
return -ENOBUFS;
}
/* Only the first call to __rtnl_register can fail */
__rtnl_register(PF_CAN, RTM_NEWROUTE, cgw_create_job, NULL, NULL);
__rtnl_register(PF_CAN, RTM_DELROUTE, cgw_remove_job, NULL, NULL);
return 0;
}
static __exit void cgw_module_exit(void)
{
rtnl_unregister_all(PF_CAN);
unregister_netdevice_notifier(&notifier);
rtnl_lock();
cgw_remove_all_jobs();
rtnl_unlock();
rcu_barrier(); /* Wait for completion of call_rcu()'s */
kmem_cache_destroy(cgw_cache);
}
module_init(cgw_module_init);
module_exit(cgw_module_exit);