OpenCloudOS-Kernel/mm/damon/dbgfs.c

978 lines
20 KiB
C
Raw Normal View History

mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* DAMON Debugfs Interface
*
* Author: SeongJae Park <sjpark@amazon.de>
*/
#define pr_fmt(fmt) "damon-dbgfs: " fmt
#include <linux/damon.h>
#include <linux/debugfs.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/page_idle.h>
#include <linux/slab.h>
static struct damon_ctx **dbgfs_ctxs;
static int dbgfs_nr_ctxs;
static struct dentry **dbgfs_dirs;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static DEFINE_MUTEX(damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
/*
* Returns non-empty string on success, negative error code otherwise.
*/
static char *user_input_str(const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret;
/* We do not accept continuous write */
if (*ppos)
return ERR_PTR(-EINVAL);
kbuf = kmalloc(count + 1, GFP_KERNEL | __GFP_NOWARN);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
if (!kbuf)
return ERR_PTR(-ENOMEM);
ret = simple_write_to_buffer(kbuf, count + 1, ppos, buf, count);
if (ret != count) {
kfree(kbuf);
return ERR_PTR(-EIO);
}
kbuf[ret] = '\0';
return kbuf;
}
static ssize_t dbgfs_attrs_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char kbuf[128];
int ret;
mutex_lock(&ctx->kdamond_lock);
ret = scnprintf(kbuf, ARRAY_SIZE(kbuf), "%lu %lu %lu %lu %lu\n",
ctx->sample_interval, ctx->aggr_interval,
ctx->primitive_update_interval, ctx->min_nr_regions,
ctx->max_nr_regions);
mutex_unlock(&ctx->kdamond_lock);
return simple_read_from_buffer(buf, count, ppos, kbuf, ret);
}
static ssize_t dbgfs_attrs_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
unsigned long s, a, r, minr, maxr;
char *kbuf;
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
if (sscanf(kbuf, "%lu %lu %lu %lu %lu",
&s, &a, &r, &minr, &maxr) != 5) {
ret = -EINVAL;
goto out;
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
ret = damon_set_attrs(ctx, s, a, r, minr, maxr);
if (!ret)
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
out:
kfree(kbuf);
return ret;
}
static ssize_t sprint_schemes(struct damon_ctx *c, char *buf, ssize_t len)
{
struct damos *s;
int written = 0;
int rc;
damon_for_each_scheme(s, c) {
rc = scnprintf(&buf[written], len - written,
"%lu %lu %u %u %u %u %d %lu %lu %lu %u %u %u %d %lu %lu %lu %lu %lu %lu\n",
s->min_sz_region, s->max_sz_region,
s->min_nr_accesses, s->max_nr_accesses,
s->min_age_region, s->max_age_region,
s->action,
s->quota.ms, s->quota.sz,
s->quota.reset_interval,
s->quota.weight_sz,
s->quota.weight_nr_accesses,
s->quota.weight_age,
s->wmarks.metric, s->wmarks.interval,
s->wmarks.high, s->wmarks.mid, s->wmarks.low,
s->stat_count, s->stat_sz);
if (!rc)
return -ENOMEM;
written += rc;
}
return written;
}
static ssize_t dbgfs_schemes_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
len = sprint_schemes(ctx, kbuf, count);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
static void free_schemes_arr(struct damos **schemes, ssize_t nr_schemes)
{
ssize_t i;
for (i = 0; i < nr_schemes; i++)
kfree(schemes[i]);
kfree(schemes);
}
static bool damos_action_valid(int action)
{
switch (action) {
case DAMOS_WILLNEED:
case DAMOS_COLD:
case DAMOS_PAGEOUT:
case DAMOS_HUGEPAGE:
case DAMOS_NOHUGEPAGE:
mm/damon/schemes: implement statistics feature To tune the DAMON-based operation schemes, knowing how many and how large regions are affected by each of the schemes will be helful. Those stats could be used for not only the tuning, but also monitoring of the working set size and the number of regions, if the scheme does not change the program behavior too much. For the reason, this implements the statistics for the schemes. The total number and size of the regions that each scheme is applied are exported to users via '->stat_count' and '->stat_sz' of 'struct damos'. Admins can also check the number by reading 'schemes' debugfs file. The last two integers now represents the stats. To allow collecting the stats without changing the program behavior, this also adds new scheme action, 'DAMOS_STAT'. Note that 'DAMOS_STAT' is not only making no memory operation actions, but also does not reset the age of regions. Link: https://lkml.kernel.org/r/20211001125604.29660-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:32 +08:00
case DAMOS_STAT:
return true;
default:
return false;
}
}
/*
* Converts a string into an array of struct damos pointers
*
* Returns an array of struct damos pointers that converted if the conversion
* success, or NULL otherwise.
*/
static struct damos **str_to_schemes(const char *str, ssize_t len,
ssize_t *nr_schemes)
{
struct damos *scheme, **schemes;
const int max_nr_schemes = 256;
int pos = 0, parsed, ret;
unsigned long min_sz, max_sz;
unsigned int min_nr_a, max_nr_a, min_age, max_age;
unsigned int action;
schemes = kmalloc_array(max_nr_schemes, sizeof(scheme),
GFP_KERNEL);
if (!schemes)
return NULL;
*nr_schemes = 0;
while (pos < len && *nr_schemes < max_nr_schemes) {
struct damos_quota quota = {};
struct damos_watermarks wmarks;
ret = sscanf(&str[pos],
"%lu %lu %u %u %u %u %u %lu %lu %lu %u %u %u %u %lu %lu %lu %lu%n",
&min_sz, &max_sz, &min_nr_a, &max_nr_a,
&min_age, &max_age, &action, &quota.ms,
&quota.sz, &quota.reset_interval,
&quota.weight_sz, &quota.weight_nr_accesses,
&quota.weight_age, &wmarks.metric,
&wmarks.interval, &wmarks.high, &wmarks.mid,
&wmarks.low, &parsed);
if (ret != 18)
break;
if (!damos_action_valid(action))
goto fail;
pos += parsed;
scheme = damon_new_scheme(min_sz, max_sz, min_nr_a, max_nr_a,
mm/damon/schemes: activate schemes based on a watermarks mechanism DAMON-based operation schemes need to be manually turned on and off. In some use cases, however, the condition for turning a scheme on and off would depend on the system's situation. For example, schemes for proactive pages reclamation would need to be turned on when some memory pressure is detected, and turned off when the system has enough free memory. For easier control of schemes activation based on the system situation, this introduces a watermarks-based mechanism. The client can describe the watermark metric (e.g., amount of free memory in the system), watermark check interval, and three watermarks, namely high, mid, and low. If the scheme is deactivated, it only gets the metric and compare that to the three watermarks for every check interval. If the metric is higher than the high watermark, the scheme is deactivated. If the metric is between the mid watermark and the low watermark, the scheme is activated. If the metric is lower than the low watermark, the scheme is deactivated again. This is to allow users fall back to traditional page-granularity mechanisms. Link: https://lkml.kernel.org/r/20211019150731.16699-12-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:47 +08:00
min_age, max_age, action, &quota, &wmarks);
if (!scheme)
goto fail;
schemes[*nr_schemes] = scheme;
*nr_schemes += 1;
}
return schemes;
fail:
free_schemes_arr(schemes, *nr_schemes);
return NULL;
}
static ssize_t dbgfs_schemes_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
struct damos **schemes;
ssize_t nr_schemes = 0, ret;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
schemes = str_to_schemes(kbuf, count, &nr_schemes);
if (!schemes) {
ret = -EINVAL;
goto out;
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
ret = damon_set_schemes(ctx, schemes, nr_schemes);
if (!ret) {
ret = count;
nr_schemes = 0;
}
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
free_schemes_arr(schemes, nr_schemes);
out:
kfree(kbuf);
return ret;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static inline bool targetid_is_pid(const struct damon_ctx *ctx)
{
return ctx->primitive.target_valid == damon_va_target_valid;
}
static ssize_t sprint_target_ids(struct damon_ctx *ctx, char *buf, ssize_t len)
{
struct damon_target *t;
unsigned long id;
int written = 0;
int rc;
damon_for_each_target(t, ctx) {
id = t->id;
if (targetid_is_pid(ctx))
/* Show pid numbers to debugfs users */
id = (unsigned long)pid_vnr((struct pid *)id);
rc = scnprintf(&buf[written], len - written, "%lu ", id);
if (!rc)
return -ENOMEM;
written += rc;
}
if (written)
written -= 1;
written += scnprintf(&buf[written], len - written, "\n");
return written;
}
static ssize_t dbgfs_target_ids_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
ssize_t len;
char ids_buf[320];
mutex_lock(&ctx->kdamond_lock);
len = sprint_target_ids(ctx, ids_buf, 320);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
return len;
return simple_read_from_buffer(buf, count, ppos, ids_buf, len);
}
/*
* Converts a string into an array of unsigned long integers
*
* Returns an array of unsigned long integers if the conversion success, or
* NULL otherwise.
*/
static unsigned long *str_to_target_ids(const char *str, ssize_t len,
ssize_t *nr_ids)
{
unsigned long *ids;
const int max_nr_ids = 32;
unsigned long id;
int pos = 0, parsed, ret;
*nr_ids = 0;
ids = kmalloc_array(max_nr_ids, sizeof(id), GFP_KERNEL);
if (!ids)
return NULL;
while (*nr_ids < max_nr_ids && pos < len) {
ret = sscanf(&str[pos], "%lu%n", &id, &parsed);
pos += parsed;
if (ret != 1)
break;
ids[*nr_ids] = id;
*nr_ids += 1;
}
return ids;
}
static void dbgfs_put_pids(unsigned long *ids, int nr_ids)
{
int i;
for (i = 0; i < nr_ids; i++)
put_pid((struct pid *)ids[i]);
}
static ssize_t dbgfs_target_ids_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
bool id_is_pid = true;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
char *kbuf, *nrs;
unsigned long *targets;
ssize_t nr_targets;
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
int i;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
nrs = kbuf;
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
if (!strncmp(kbuf, "paddr\n", count)) {
id_is_pid = false;
/* target id is meaningless here, but we set it just for fun */
scnprintf(kbuf, count, "42 ");
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
targets = str_to_target_ids(nrs, count, &nr_targets);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
if (!targets) {
ret = -ENOMEM;
goto out;
}
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
if (id_is_pid) {
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
for (i = 0; i < nr_targets; i++) {
targets[i] = (unsigned long)find_get_pid(
(int)targets[i]);
if (!targets[i]) {
dbgfs_put_pids(targets, i);
ret = -EINVAL;
goto free_targets_out;
}
}
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
if (id_is_pid)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
dbgfs_put_pids(targets, nr_targets);
ret = -EBUSY;
goto unlock_out;
}
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
/* remove targets with previously-set primitive */
damon_set_targets(ctx, NULL, 0);
/* Configure the context for the address space type */
if (id_is_pid)
damon_va_set_primitives(ctx);
else
damon_pa_set_primitives(ctx);
ret = damon_set_targets(ctx, targets, nr_targets);
if (ret) {
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:47:00 +08:00
if (id_is_pid)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
dbgfs_put_pids(targets, nr_targets);
} else {
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
}
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
free_targets_out:
kfree(targets);
out:
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:42 +08:00
static ssize_t sprint_init_regions(struct damon_ctx *c, char *buf, ssize_t len)
{
struct damon_target *t;
struct damon_region *r;
int written = 0;
int rc;
damon_for_each_target(t, c) {
damon_for_each_region(r, t) {
rc = scnprintf(&buf[written], len - written,
"%lu %lu %lu\n",
t->id, r->ar.start, r->ar.end);
if (!rc)
return -ENOMEM;
written += rc;
}
}
return written;
}
static ssize_t dbgfs_init_regions_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:42 +08:00
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
mutex_unlock(&ctx->kdamond_lock);
len = -EBUSY;
goto out;
}
len = sprint_init_regions(ctx, kbuf, count);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
static int add_init_region(struct damon_ctx *c,
unsigned long target_id, struct damon_addr_range *ar)
{
struct damon_target *t;
struct damon_region *r, *prev;
unsigned long id;
int rc = -EINVAL;
if (ar->start >= ar->end)
return -EINVAL;
damon_for_each_target(t, c) {
id = t->id;
if (targetid_is_pid(c))
id = (unsigned long)pid_vnr((struct pid *)id);
if (id == target_id) {
r = damon_new_region(ar->start, ar->end);
if (!r)
return -ENOMEM;
damon_add_region(r, t);
if (damon_nr_regions(t) > 1) {
prev = damon_prev_region(r);
if (prev->ar.end > r->ar.start) {
damon_destroy_region(r, t);
return -EINVAL;
}
}
rc = 0;
}
}
return rc;
}
static int set_init_regions(struct damon_ctx *c, const char *str, ssize_t len)
{
struct damon_target *t;
struct damon_region *r, *next;
int pos = 0, parsed, ret;
unsigned long target_id;
struct damon_addr_range ar;
int err;
damon_for_each_target(t, c) {
damon_for_each_region_safe(r, next, t)
damon_destroy_region(r, t);
}
while (pos < len) {
ret = sscanf(&str[pos], "%lu %lu %lu%n",
&target_id, &ar.start, &ar.end, &parsed);
if (ret != 3)
break;
err = add_init_region(c, target_id, &ar);
if (err)
goto fail;
pos += parsed;
}
return 0;
fail:
damon_for_each_target(t, c) {
damon_for_each_region_safe(r, next, t)
damon_destroy_region(r, t);
}
return err;
}
static ssize_t dbgfs_init_regions_write(struct file *file,
const char __user *buf, size_t count,
loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t ret = count;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
err = set_init_regions(ctx, kbuf, ret);
if (err)
ret = err;
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
static ssize_t dbgfs_kdamond_pid_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond)
len = scnprintf(kbuf, count, "%d\n", ctx->kdamond->pid);
else
len = scnprintf(kbuf, count, "none\n");
mutex_unlock(&ctx->kdamond_lock);
if (!len)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static int damon_dbgfs_open(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return nonseekable_open(inode, file);
}
static const struct file_operations attrs_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_attrs_read,
.write = dbgfs_attrs_write,
};
static const struct file_operations schemes_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_schemes_read,
.write = dbgfs_schemes_write,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static const struct file_operations target_ids_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_target_ids_read,
.write = dbgfs_target_ids_write,
};
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:42 +08:00
static const struct file_operations init_regions_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_init_regions_read,
.write = dbgfs_init_regions_write,
};
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:57 +08:00
static const struct file_operations kdamond_pid_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_kdamond_pid_read,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static void dbgfs_fill_ctx_dir(struct dentry *dir, struct damon_ctx *ctx)
{
const char * const file_names[] = {"attrs", "schemes", "target_ids",
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:42 +08:00
"init_regions", "kdamond_pid"};
const struct file_operations *fops[] = {&attrs_fops, &schemes_fops,
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 04:46:42 +08:00
&target_ids_fops, &init_regions_fops, &kdamond_pid_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
int i;
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dir, ctx, fops[i]);
}
static void dbgfs_before_terminate(struct damon_ctx *ctx)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
{
struct damon_target *t, *next;
if (!targetid_is_pid(ctx))
return;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
mutex_lock(&ctx->kdamond_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
damon_for_each_target_safe(t, next, ctx) {
put_pid((struct pid *)t->id);
damon_destroy_target(t);
}
mutex_unlock(&ctx->kdamond_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
}
static struct damon_ctx *dbgfs_new_ctx(void)
{
struct damon_ctx *ctx;
ctx = damon_new_ctx();
if (!ctx)
return NULL;
damon_va_set_primitives(ctx);
ctx->callback.before_terminate = dbgfs_before_terminate;
return ctx;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static void dbgfs_destroy_ctx(struct damon_ctx *ctx)
{
damon_destroy_ctx(ctx);
}
/*
* Make a context of @name and create a debugfs directory for it.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Returns 0 on success, negative error code otherwise.
*/
static int dbgfs_mk_context(char *name)
{
struct dentry *root, **new_dirs, *new_dir;
struct damon_ctx **new_ctxs, *new_ctx;
if (damon_nr_running_ctxs())
return -EBUSY;
new_ctxs = krealloc(dbgfs_ctxs, sizeof(*dbgfs_ctxs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_ctxs)
return -ENOMEM;
dbgfs_ctxs = new_ctxs;
new_dirs = krealloc(dbgfs_dirs, sizeof(*dbgfs_dirs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_dirs)
return -ENOMEM;
dbgfs_dirs = new_dirs;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
new_dir = debugfs_create_dir(name, root);
dbgfs_dirs[dbgfs_nr_ctxs] = new_dir;
new_ctx = dbgfs_new_ctx();
if (!new_ctx) {
debugfs_remove(new_dir);
dbgfs_dirs[dbgfs_nr_ctxs] = NULL;
return -ENOMEM;
}
dbgfs_ctxs[dbgfs_nr_ctxs] = new_ctx;
dbgfs_fill_ctx_dir(dbgfs_dirs[dbgfs_nr_ctxs],
dbgfs_ctxs[dbgfs_nr_ctxs]);
dbgfs_nr_ctxs++;
return 0;
}
static ssize_t dbgfs_mk_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
char *ctx_name;
ssize_t ret;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
ret = dbgfs_mk_context(ctx_name);
if (!ret)
ret = count;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
/*
* Remove a context of @name and its debugfs directory.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Return 0 on success, negative error code otherwise.
*/
static int dbgfs_rm_context(char *name)
{
struct dentry *root, *dir, **new_dirs;
struct damon_ctx **new_ctxs;
int i, j;
if (damon_nr_running_ctxs())
return -EBUSY;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
dir = debugfs_lookup(name, root);
if (!dir)
return -ENOENT;
new_dirs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_dirs),
GFP_KERNEL);
if (!new_dirs)
return -ENOMEM;
new_ctxs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_ctxs),
GFP_KERNEL);
if (!new_ctxs) {
kfree(new_dirs);
return -ENOMEM;
}
for (i = 0, j = 0; i < dbgfs_nr_ctxs; i++) {
if (dbgfs_dirs[i] == dir) {
debugfs_remove(dbgfs_dirs[i]);
dbgfs_destroy_ctx(dbgfs_ctxs[i]);
continue;
}
new_dirs[j] = dbgfs_dirs[i];
new_ctxs[j++] = dbgfs_ctxs[i];
}
kfree(dbgfs_dirs);
kfree(dbgfs_ctxs);
dbgfs_dirs = new_dirs;
dbgfs_ctxs = new_ctxs;
dbgfs_nr_ctxs--;
return 0;
}
static ssize_t dbgfs_rm_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
char *ctx_name;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
ret = dbgfs_rm_context(ctx_name);
if (!ret)
ret = count;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static ssize_t dbgfs_monitor_on_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
char monitor_on_buf[5];
bool monitor_on = damon_nr_running_ctxs() != 0;
int len;
len = scnprintf(monitor_on_buf, 5, monitor_on ? "on\n" : "off\n");
return simple_read_from_buffer(buf, count, ppos, monitor_on_buf, len);
}
static ssize_t dbgfs_monitor_on_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
char *kbuf;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
/* Remove white space */
if (sscanf(kbuf, "%s", kbuf) != 1) {
kfree(kbuf);
return -EINVAL;
}
mutex_lock(&damon_dbgfs_lock);
if (!strncmp(kbuf, "on", count)) {
int i;
for (i = 0; i < dbgfs_nr_ctxs; i++) {
if (damon_targets_empty(dbgfs_ctxs[i])) {
kfree(kbuf);
mutex_unlock(&damon_dbgfs_lock);
return -EINVAL;
}
}
ret = damon_start(dbgfs_ctxs, dbgfs_nr_ctxs);
} else if (!strncmp(kbuf, "off", count)) {
ret = damon_stop(dbgfs_ctxs, dbgfs_nr_ctxs);
} else {
ret = -EINVAL;
}
mutex_unlock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
if (!ret)
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
static const struct file_operations mk_contexts_fops = {
.write = dbgfs_mk_context_write,
};
static const struct file_operations rm_contexts_fops = {
.write = dbgfs_rm_context_write,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
static const struct file_operations monitor_on_fops = {
.read = dbgfs_monitor_on_read,
.write = dbgfs_monitor_on_write,
};
static int __init __damon_dbgfs_init(void)
{
struct dentry *dbgfs_root;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:01 +08:00
const char * const file_names[] = {"mk_contexts", "rm_contexts",
"monitor_on"};
const struct file_operations *fops[] = {&mk_contexts_fops,
&rm_contexts_fops, &monitor_on_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
int i;
dbgfs_root = debugfs_create_dir("damon", NULL);
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dbgfs_root, NULL,
fops[i]);
dbgfs_fill_ctx_dir(dbgfs_root, dbgfs_ctxs[0]);
dbgfs_dirs = kmalloc_array(1, sizeof(dbgfs_root), GFP_KERNEL);
if (!dbgfs_dirs) {
debugfs_remove(dbgfs_root);
return -ENOMEM;
}
dbgfs_dirs[0] = dbgfs_root;
return 0;
}
/*
* Functions for the initialization
*/
static int __init damon_dbgfs_init(void)
{
int rc = -ENOMEM;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
mutex_lock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
dbgfs_ctxs = kmalloc(sizeof(*dbgfs_ctxs), GFP_KERNEL);
if (!dbgfs_ctxs)
goto out;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
dbgfs_ctxs[0] = dbgfs_new_ctx();
if (!dbgfs_ctxs[0]) {
kfree(dbgfs_ctxs);
goto out;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
}
dbgfs_nr_ctxs = 1;
rc = __damon_dbgfs_init();
if (rc) {
kfree(dbgfs_ctxs[0]);
kfree(dbgfs_ctxs);
pr_err("%s: dbgfs init failed\n", __func__);
}
out:
mutex_unlock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:56:53 +08:00
return rc;
}
module_init(damon_dbgfs_init);
mm/damon: add kunit tests This commit adds kunit based unit tests for the core and the virtual address spaces monitoring primitives of DAMON. Link: https://lkml.kernel.org/r/20210716081449.22187-12-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 10:57:09 +08:00
#include "dbgfs-test.h"