2018-07-14 00:47:35 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
//
|
|
|
|
// Driver for AT91 USART Controllers as SPI
|
|
|
|
//
|
|
|
|
// Copyright (C) 2018 Microchip Technology Inc.
|
|
|
|
//
|
|
|
|
// Author: Radu Pirea <radu.pirea@microchip.com>
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of_gpio.h>
|
2018-11-30 06:34:15 +08:00
|
|
|
#include <linux/pinctrl/consumer.h>
|
2018-07-14 00:47:35 +08:00
|
|
|
#include <linux/platform_device.h>
|
2018-11-21 19:27:30 +08:00
|
|
|
#include <linux/pm_runtime.h>
|
2018-07-14 00:47:35 +08:00
|
|
|
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
|
|
|
|
#define US_CR 0x00
|
|
|
|
#define US_MR 0x04
|
|
|
|
#define US_IER 0x08
|
|
|
|
#define US_IDR 0x0C
|
|
|
|
#define US_CSR 0x14
|
|
|
|
#define US_RHR 0x18
|
|
|
|
#define US_THR 0x1C
|
|
|
|
#define US_BRGR 0x20
|
|
|
|
#define US_VERSION 0xFC
|
|
|
|
|
|
|
|
#define US_CR_RSTRX BIT(2)
|
|
|
|
#define US_CR_RSTTX BIT(3)
|
|
|
|
#define US_CR_RXEN BIT(4)
|
|
|
|
#define US_CR_RXDIS BIT(5)
|
|
|
|
#define US_CR_TXEN BIT(6)
|
|
|
|
#define US_CR_TXDIS BIT(7)
|
|
|
|
|
|
|
|
#define US_MR_SPI_MASTER 0x0E
|
|
|
|
#define US_MR_CHRL GENMASK(7, 6)
|
|
|
|
#define US_MR_CPHA BIT(8)
|
|
|
|
#define US_MR_CPOL BIT(16)
|
|
|
|
#define US_MR_CLKO BIT(18)
|
|
|
|
#define US_MR_WRDBT BIT(20)
|
|
|
|
#define US_MR_LOOP BIT(15)
|
|
|
|
|
|
|
|
#define US_IR_RXRDY BIT(0)
|
|
|
|
#define US_IR_TXRDY BIT(1)
|
|
|
|
#define US_IR_OVRE BIT(5)
|
|
|
|
|
|
|
|
#define US_BRGR_SIZE BIT(16)
|
|
|
|
|
|
|
|
#define US_MIN_CLK_DIV 0x06
|
|
|
|
#define US_MAX_CLK_DIV BIT(16)
|
|
|
|
|
|
|
|
#define US_RESET (US_CR_RSTRX | US_CR_RSTTX)
|
|
|
|
#define US_DISABLE (US_CR_RXDIS | US_CR_TXDIS)
|
|
|
|
#define US_ENABLE (US_CR_RXEN | US_CR_TXEN)
|
|
|
|
#define US_OVRE_RXRDY_IRQS (US_IR_OVRE | US_IR_RXRDY)
|
|
|
|
|
|
|
|
#define US_INIT \
|
|
|
|
(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
|
|
|
|
|
|
|
|
/* Register access macros */
|
|
|
|
#define at91_usart_spi_readl(port, reg) \
|
|
|
|
readl_relaxed((port)->regs + US_##reg)
|
|
|
|
#define at91_usart_spi_writel(port, reg, value) \
|
|
|
|
writel_relaxed((value), (port)->regs + US_##reg)
|
|
|
|
|
|
|
|
#define at91_usart_spi_readb(port, reg) \
|
|
|
|
readb_relaxed((port)->regs + US_##reg)
|
|
|
|
#define at91_usart_spi_writeb(port, reg, value) \
|
|
|
|
writeb_relaxed((value), (port)->regs + US_##reg)
|
|
|
|
|
|
|
|
struct at91_usart_spi {
|
|
|
|
struct spi_transfer *current_transfer;
|
|
|
|
void __iomem *regs;
|
|
|
|
struct device *dev;
|
|
|
|
struct clk *clk;
|
|
|
|
|
|
|
|
/*used in interrupt to protect data reading*/
|
|
|
|
spinlock_t lock;
|
|
|
|
|
|
|
|
int irq;
|
|
|
|
unsigned int current_tx_remaining_bytes;
|
|
|
|
unsigned int current_rx_remaining_bytes;
|
|
|
|
|
|
|
|
u32 spi_clk;
|
|
|
|
u32 status;
|
|
|
|
|
|
|
|
bool xfer_failed;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
return aus->status & US_IR_TXRDY;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
return aus->status & US_IR_RXRDY;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
return aus->status & US_IR_OVRE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
aus->status = at91_usart_spi_readl(aus, CSR);
|
|
|
|
return aus->status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
unsigned int len = aus->current_transfer->len;
|
|
|
|
unsigned int remaining = aus->current_tx_remaining_bytes;
|
|
|
|
const u8 *tx_buf = aus->current_transfer->tx_buf;
|
|
|
|
|
|
|
|
if (!remaining)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (at91_usart_spi_tx_ready(aus)) {
|
|
|
|
at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
|
|
|
|
aus->current_tx_remaining_bytes--;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
int len = aus->current_transfer->len;
|
|
|
|
int remaining = aus->current_rx_remaining_bytes;
|
|
|
|
u8 *rx_buf = aus->current_transfer->rx_buf;
|
|
|
|
|
|
|
|
if (!remaining)
|
|
|
|
return;
|
|
|
|
|
|
|
|
rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
|
|
|
|
aus->current_rx_remaining_bytes--;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
|
|
|
|
struct spi_transfer *xfer)
|
|
|
|
{
|
|
|
|
at91_usart_spi_writel(aus, BRGR,
|
|
|
|
DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct spi_controller *controller = dev_id;
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(controller);
|
|
|
|
|
|
|
|
spin_lock(&aus->lock);
|
|
|
|
at91_usart_spi_read_status(aus);
|
|
|
|
|
|
|
|
if (at91_usart_spi_check_overrun(aus)) {
|
|
|
|
aus->xfer_failed = true;
|
|
|
|
at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
|
|
|
|
spin_unlock(&aus->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (at91_usart_spi_rx_ready(aus)) {
|
|
|
|
at91_usart_spi_rx(aus);
|
|
|
|
spin_unlock(&aus->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&aus->lock);
|
|
|
|
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91_usart_spi_setup(struct spi_device *spi)
|
|
|
|
{
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
|
|
|
|
u32 *ausd = spi->controller_state;
|
|
|
|
unsigned int mr = at91_usart_spi_readl(aus, MR);
|
|
|
|
u8 bits = spi->bits_per_word;
|
|
|
|
|
|
|
|
if (bits != 8) {
|
|
|
|
dev_dbg(&spi->dev, "Only 8 bits per word are supported\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
|
|
mr |= US_MR_CPOL;
|
|
|
|
else
|
|
|
|
mr &= ~US_MR_CPOL;
|
|
|
|
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
|
|
mr |= US_MR_CPHA;
|
|
|
|
else
|
|
|
|
mr &= ~US_MR_CPHA;
|
|
|
|
|
|
|
|
if (spi->mode & SPI_LOOP)
|
|
|
|
mr |= US_MR_LOOP;
|
|
|
|
else
|
|
|
|
mr &= ~US_MR_LOOP;
|
|
|
|
|
|
|
|
if (!ausd) {
|
|
|
|
ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
|
|
|
|
if (!ausd)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
spi->controller_state = ausd;
|
|
|
|
}
|
|
|
|
|
|
|
|
*ausd = mr;
|
|
|
|
|
|
|
|
dev_dbg(&spi->dev,
|
|
|
|
"setup: bpw %u mode 0x%x -> mr %d %08x\n",
|
|
|
|
bits, spi->mode, spi->chip_select, mr);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-09-11 18:38:50 +08:00
|
|
|
static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
|
|
|
|
struct spi_device *spi,
|
|
|
|
struct spi_transfer *xfer)
|
2018-07-14 00:47:35 +08:00
|
|
|
{
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
|
|
|
|
|
|
|
|
at91_usart_spi_set_xfer_speed(aus, xfer);
|
|
|
|
aus->xfer_failed = false;
|
|
|
|
aus->current_transfer = xfer;
|
|
|
|
aus->current_tx_remaining_bytes = xfer->len;
|
|
|
|
aus->current_rx_remaining_bytes = xfer->len;
|
|
|
|
|
|
|
|
while ((aus->current_tx_remaining_bytes ||
|
|
|
|
aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
|
|
|
|
at91_usart_spi_read_status(aus);
|
|
|
|
at91_usart_spi_tx(aus);
|
|
|
|
cpu_relax();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (aus->xfer_failed) {
|
|
|
|
dev_err(aus->dev, "Overrun!\n");
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-09-11 18:38:50 +08:00
|
|
|
static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
|
|
|
|
struct spi_message *message)
|
2018-07-14 00:47:35 +08:00
|
|
|
{
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
|
|
|
|
struct spi_device *spi = message->spi;
|
|
|
|
u32 *ausd = spi->controller_state;
|
|
|
|
|
|
|
|
at91_usart_spi_writel(aus, CR, US_ENABLE);
|
|
|
|
at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
|
|
|
|
at91_usart_spi_writel(aus, MR, *ausd);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-09-11 18:38:50 +08:00
|
|
|
static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
|
|
|
|
struct spi_message *message)
|
2018-07-14 00:47:35 +08:00
|
|
|
{
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
|
|
|
|
|
|
|
|
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
|
|
|
|
at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void at91_usart_spi_cleanup(struct spi_device *spi)
|
|
|
|
{
|
|
|
|
struct at91_usart_spi_device *ausd = spi->controller_state;
|
|
|
|
|
|
|
|
spi->controller_state = NULL;
|
|
|
|
kfree(ausd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void at91_usart_spi_init(struct at91_usart_spi *aus)
|
|
|
|
{
|
|
|
|
at91_usart_spi_writel(aus, MR, US_INIT);
|
|
|
|
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91_usart_gpio_setup(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device_node *np = pdev->dev.parent->of_node;
|
|
|
|
int i;
|
|
|
|
int ret;
|
|
|
|
int nb;
|
|
|
|
|
|
|
|
if (!np)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
nb = of_gpio_named_count(np, "cs-gpios");
|
|
|
|
for (i = 0; i < nb; i++) {
|
|
|
|
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
|
|
|
|
|
|
|
|
if (cs_gpio < 0)
|
|
|
|
return cs_gpio;
|
|
|
|
|
|
|
|
if (gpio_is_valid(cs_gpio)) {
|
|
|
|
ret = devm_gpio_request_one(&pdev->dev, cs_gpio,
|
|
|
|
GPIOF_DIR_OUT,
|
|
|
|
dev_name(&pdev->dev));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91_usart_spi_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct resource *regs;
|
|
|
|
struct spi_controller *controller;
|
|
|
|
struct at91_usart_spi *aus;
|
|
|
|
struct clk *clk;
|
|
|
|
int irq;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
regs = platform_get_resource(to_platform_device(pdev->dev.parent),
|
|
|
|
IORESOURCE_MEM, 0);
|
|
|
|
if (!regs)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
|
|
|
|
if (irq < 0)
|
|
|
|
return irq;
|
|
|
|
|
|
|
|
clk = devm_clk_get(pdev->dev.parent, "usart");
|
|
|
|
if (IS_ERR(clk))
|
|
|
|
return PTR_ERR(clk);
|
|
|
|
|
|
|
|
ret = -ENOMEM;
|
|
|
|
controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
|
|
|
|
if (!controller)
|
|
|
|
goto at91_usart_spi_probe_fail;
|
|
|
|
|
|
|
|
ret = at91_usart_gpio_setup(pdev);
|
|
|
|
if (ret)
|
|
|
|
goto at91_usart_spi_probe_fail;
|
|
|
|
|
|
|
|
controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
|
|
|
|
controller->dev.of_node = pdev->dev.parent->of_node;
|
|
|
|
controller->bits_per_word_mask = SPI_BPW_MASK(8);
|
|
|
|
controller->setup = at91_usart_spi_setup;
|
|
|
|
controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
|
|
|
|
controller->transfer_one = at91_usart_spi_transfer_one;
|
|
|
|
controller->prepare_message = at91_usart_spi_prepare_message;
|
|
|
|
controller->unprepare_message = at91_usart_spi_unprepare_message;
|
|
|
|
controller->cleanup = at91_usart_spi_cleanup;
|
|
|
|
controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
|
|
|
|
US_MIN_CLK_DIV);
|
|
|
|
controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
|
|
|
|
US_MAX_CLK_DIV);
|
|
|
|
platform_set_drvdata(pdev, controller);
|
|
|
|
|
|
|
|
aus = spi_master_get_devdata(controller);
|
|
|
|
|
|
|
|
aus->dev = &pdev->dev;
|
|
|
|
aus->regs = devm_ioremap_resource(&pdev->dev, regs);
|
|
|
|
if (IS_ERR(aus->regs)) {
|
|
|
|
ret = PTR_ERR(aus->regs);
|
|
|
|
goto at91_usart_spi_probe_fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
aus->irq = irq;
|
|
|
|
aus->clk = clk;
|
|
|
|
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
|
|
|
|
dev_name(&pdev->dev), controller);
|
|
|
|
if (ret)
|
|
|
|
goto at91_usart_spi_probe_fail;
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
|
|
if (ret)
|
|
|
|
goto at91_usart_spi_probe_fail;
|
|
|
|
|
|
|
|
aus->spi_clk = clk_get_rate(clk);
|
|
|
|
at91_usart_spi_init(aus);
|
|
|
|
|
|
|
|
spin_lock_init(&aus->lock);
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, controller);
|
|
|
|
if (ret)
|
|
|
|
goto at91_usart_fail_register_master;
|
|
|
|
|
|
|
|
dev_info(&pdev->dev,
|
|
|
|
"AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
|
|
|
|
at91_usart_spi_readl(aus, VERSION),
|
|
|
|
®s->start, irq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
at91_usart_fail_register_master:
|
|
|
|
clk_disable_unprepare(clk);
|
|
|
|
at91_usart_spi_probe_fail:
|
|
|
|
spi_master_put(controller);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2018-11-21 19:27:30 +08:00
|
|
|
__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct spi_controller *ctlr = dev_get_drvdata(dev);
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
|
|
|
|
|
|
|
|
clk_disable_unprepare(aus->clk);
|
|
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct spi_controller *ctrl = dev_get_drvdata(dev);
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
|
|
|
|
|
|
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
|
|
|
|
return clk_prepare_enable(aus->clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct spi_controller *ctrl = dev_get_drvdata(dev);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = spi_controller_suspend(ctrl);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (!pm_runtime_suspended(dev))
|
|
|
|
at91_usart_spi_runtime_suspend(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
__maybe_unused static int at91_usart_spi_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct spi_controller *ctrl = dev_get_drvdata(dev);
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
|
|
ret = at91_usart_spi_runtime_resume(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
at91_usart_spi_init(aus);
|
|
|
|
|
|
|
|
return spi_controller_resume(ctrl);
|
|
|
|
}
|
|
|
|
|
2018-07-14 00:47:35 +08:00
|
|
|
static int at91_usart_spi_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct spi_controller *ctlr = platform_get_drvdata(pdev);
|
|
|
|
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
|
|
|
|
|
|
|
|
clk_disable_unprepare(aus->clk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-11-21 19:27:30 +08:00
|
|
|
static const struct dev_pm_ops at91_usart_spi_pm_ops = {
|
|
|
|
SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
|
|
|
|
SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
|
|
|
|
at91_usart_spi_runtime_resume, NULL)
|
|
|
|
};
|
|
|
|
|
2018-07-14 00:47:35 +08:00
|
|
|
static const struct of_device_id at91_usart_spi_dt_ids[] = {
|
|
|
|
{ .compatible = "microchip,at91sam9g45-usart-spi"},
|
|
|
|
{ /* sentinel */}
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(of, at91_usart_spi_dt_ids);
|
|
|
|
|
|
|
|
static struct platform_driver at91_usart_spi_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "at91_usart_spi",
|
2018-11-21 19:27:30 +08:00
|
|
|
.pm = &at91_usart_spi_pm_ops,
|
2018-07-14 00:47:35 +08:00
|
|
|
},
|
|
|
|
.probe = at91_usart_spi_probe,
|
|
|
|
.remove = at91_usart_spi_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(at91_usart_spi_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
|
|
|
|
MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_ALIAS("platform:at91_usart_spi");
|