OpenCloudOS-Kernel/mm/gup.c

2455 lines
67 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/memremap.h>
#include <linux/pagemap.h>
#include <linux/rmap.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/sched/signal.h>
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
#include <linux/rwsem.h>
#include <linux/hugetlb.h>
#include <linux/migrate.h>
#include <linux/mm_inline.h>
#include <linux/sched/mm.h>
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
#include <asm/mmu_context.h>
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
#include "internal.h"
struct follow_page_context {
struct dev_pagemap *pgmap;
unsigned int page_mask;
};
/*
* Return the compound head page with ref appropriately incremented,
* or NULL if that failed.
*/
static inline struct page *try_get_compound_head(struct page *page, int refs)
{
struct page *head = compound_head(page);
if (WARN_ON_ONCE(page_ref_count(head) < 0))
return NULL;
if (unlikely(!page_cache_add_speculative(head, refs)))
return NULL;
return head;
}
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
/**
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
* put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
* @pages: array of pages to be maybe marked dirty, and definitely released.
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
* @npages: number of pages in the @pages array.
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
* @make_dirty: whether to mark the pages dirty
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
*
* "gup-pinned page" refers to a page that has had one of the get_user_pages()
* variants called on that page.
*
* For each page in the @pages array, make that page (or its head page, if a
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
* compound page) dirty, if @make_dirty is true, and if the page was previously
* listed as clean. In any case, releases all pages using put_user_page(),
* possibly via put_user_pages(), for the non-dirty case.
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
*
* Please see the put_user_page() documentation for details.
*
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
* set_page_dirty_lock() is used internally. If instead, set_page_dirty() is
* required, then the caller should a) verify that this is really correct,
* because _lock() is usually required, and b) hand code it:
* set_page_dirty_lock(), put_user_page().
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
*
*/
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
bool make_dirty)
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
{
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
unsigned long index;
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
mm/gup: add make_dirty arg to put_user_pages_dirty_lock() [11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:35:04 +08:00
/*
* TODO: this can be optimized for huge pages: if a series of pages is
* physically contiguous and part of the same compound page, then a
* single operation to the head page should suffice.
*/
if (!make_dirty) {
put_user_pages(pages, npages);
return;
}
for (index = 0; index < npages; index++) {
struct page *page = compound_head(pages[index]);
/*
* Checking PageDirty at this point may race with
* clear_page_dirty_for_io(), but that's OK. Two key
* cases:
*
* 1) This code sees the page as already dirty, so it
* skips the call to set_page_dirty(). That could happen
* because clear_page_dirty_for_io() called
* page_mkclean(), followed by set_page_dirty().
* However, now the page is going to get written back,
* which meets the original intention of setting it
* dirty, so all is well: clear_page_dirty_for_io() goes
* on to call TestClearPageDirty(), and write the page
* back.
*
* 2) This code sees the page as clean, so it calls
* set_page_dirty(). The page stays dirty, despite being
* written back, so it gets written back again in the
* next writeback cycle. This is harmless.
*/
if (!PageDirty(page))
set_page_dirty_lock(page);
put_user_page(page);
}
mm: introduce put_user_page*(), placeholder versions A discussion of the overall problem is below. As mentioned in patch 0001, the steps are to fix the problem are: 1) Provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. Overview ======== Some kernel components (file systems, device drivers) need to access memory that is specified via process virtual address. For a long time, the API to achieve that was get_user_pages ("GUP") and its variations. However, GUP has critical limitations that have been overlooked; in particular, GUP does not interact correctly with filesystems in all situations. That means that file-backed memory + GUP is a recipe for potential problems, some of which have already occurred in the field. GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem code to get the struct page behind a virtual address and to let storage hardware perform a direct copy to or from that page. This is a short-lived access pattern, and as such, the window for a concurrent writeback of GUP'd page was small enough that there were not (we think) any reported problems. Also, userspace was expected to understand and accept that Direct IO was not synchronized with memory-mapped access to that data, nor with any process address space changes such as munmap(), mremap(), etc. Over the years, more GUP uses have appeared (virtualization, device drivers, RDMA) that can keep the pages they get via GUP for a long period of time (seconds, minutes, hours, days, ...). This long-term pinning makes an underlying design problem more obvious. In fact, there are a number of key problems inherent to GUP: Interactions with file systems ============================== File systems expect to be able to write back data, both to reclaim pages, and for data integrity. Allowing other hardware (NICs, GPUs, etc) to gain write access to the file memory pages means that such hardware can dirty the pages, without the filesystem being aware. This can, in some cases (depending on filesystem, filesystem options, block device, block device options, and other variables), lead to data corruption, and also to kernel bugs of the form: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. Long term GUP ============= Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a writeable mapping is created), and the pages are file-backed. That can lead to filesystem corruption. What happens is that when a file-backed page is being written back, it is first mapped read-only in all of the CPU page tables; the file system then assumes that nobody can write to the page, and that the page content is therefore stable. Unfortunately, the GUP callers generally do not monitor changes to the CPU pages tables; they instead assume that the following pattern is safe (it's not): get_user_pages() Hardware can keep a reference to those pages for a very long time, and write to it at any time. Because "hardware" here means "devices that are not a CPU", this activity occurs without any interaction with the kernel's file system code. for each page set_page_dirty put_page() In fact, the GUP documentation even recommends that pattern. Anyway, the file system assumes that the page is stable (nothing is writing to the page), and that is a problem: stable page content is necessary for many filesystem actions during writeback, such as checksum, encryption, RAID striping, etc. Furthermore, filesystem features like COW (copy on write) or snapshot also rely on being able to use a new page for as memory for that memory range inside the file. Corruption during write back is clearly possible here. To solve that, one idea is to identify pages that have active GUP, so that we can use a bounce page to write stable data to the filesystem. The filesystem would work on the bounce page, while any of the active GUP might write to the original page. This would avoid the stable page violation problem, but note that it is only part of the overall solution, because other problems remain. Other filesystem features that need to replace the page with a new one can be inhibited for pages that are GUP-pinned. This will, however, alter and limit some of those filesystem features. The only fix for that would be to require GUP users to monitor and respond to CPU page table updates. Subsystems such as ODP and HMM do this, for example. This aspect of the problem is still under discussion. Direct IO ========= Direct IO can cause corruption, if userspace does Direct-IO that writes to a range of virtual addresses that are mmap'd to a file. The pages written to are file-backed pages that can be under write back, while the Direct IO is taking place. Here, Direct IO races with a write back: it calls GUP before page_mkclean() has replaced the CPU pte with a read-only entry. The race window is pretty small, which is probably why years have gone by before we noticed this problem: Direct IO is generally very quick, and tends to finish up before the filesystem gets around to do anything with the page contents. However, it's still a real problem. The solution is to never let GUP return pages that are under write back, but instead, force GUP to take a write fault on those pages. That way, GUP will properly synchronize with the active write back. This does not change the required GUP behavior, it just avoids that race. Details ======= Introduces put_user_page(), which simply calls put_page(). This provides a way to update all get_user_pages*() callers, so that they call put_user_page(), instead of put_page(). Also introduces put_user_pages(), and a few dirty/locked variations, as a replacement for release_pages(), and also as a replacement for open-coded loops that release multiple pages. These may be used for subsequent performance improvements, via batching of pages to be released. This is the first step of fixing a problem (also described in [1] and [2]) with interactions between get_user_pages ("gup") and filesystems. Problem description: let's start with a bug report. Below, is what happens sometimes, under memory pressure, when a driver pins some pages via gup, and then marks those pages dirty, and releases them. Note that the gup documentation actually recommends that pattern. The problem is that the filesystem may do a writeback while the pages were gup-pinned, and then the filesystem believes that the pages are clean. So, when the driver later marks the pages as dirty, that conflicts with the filesystem's page tracking and results in a BUG(), like this one that I experienced: kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899! backtrace: ext4_writepage __writepage write_cache_pages ext4_writepages do_writepages __writeback_single_inode writeback_sb_inodes __writeback_inodes_wb wb_writeback wb_workfn process_one_work worker_thread kthread ret_from_fork ...which is due to the file system asserting that there are still buffer heads attached: ({ \ BUG_ON(!PagePrivate(page)); \ ((struct buffer_head *)page_private(page)); \ }) Dave Chinner's description of this is very clear: "The fundamental issue is that ->page_mkwrite must be called on every write access to a clean file backed page, not just the first one. How long the GUP reference lasts is irrelevant, if the page is clean and you need to dirty it, you must call ->page_mkwrite before it is marked writeable and dirtied. Every. Time." This is just one symptom of the larger design problem: real filesystems that actually write to a backing device, do not actually support get_user_pages() being called on their pages, and letting hardware write directly to those pages--even though that pattern has been going on since about 2005 or so. The steps are to fix it are: 1) (This patch): provide put_user_page*() routines, intended to be used for releasing pages that were pinned via get_user_pages*(). 2) Convert all of the call sites for get_user_pages*(), to invoke put_user_page*(), instead of put_page(). This involves dozens of call sites, and will take some time. 3) After (2) is complete, use get_user_pages*() and put_user_page*() to implement tracking of these pages. This tracking will be separate from the existing struct page refcounting. 4) Use the tracking and identification of these pages, to implement special handling (especially in writeback paths) when the pages are backed by a filesystem. [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()" [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()" Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [docs] Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christoph Lameter <cl@linux.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:19:08 +08:00
}
EXPORT_SYMBOL(put_user_pages_dirty_lock);
/**
* put_user_pages() - release an array of gup-pinned pages.
* @pages: array of pages to be marked dirty and released.
* @npages: number of pages in the @pages array.
*
* For each page in the @pages array, release the page using put_user_page().
*
* Please see the put_user_page() documentation for details.
*/
void put_user_pages(struct page **pages, unsigned long npages)
{
unsigned long index;
/*
* TODO: this can be optimized for huge pages: if a series of pages is
* physically contiguous and part of the same compound page, then a
* single operation to the head page should suffice.
*/
for (index = 0; index < npages; index++)
put_user_page(pages[index]);
}
EXPORT_SYMBOL(put_user_pages);
#ifdef CONFIG_MMU
static struct page *no_page_table(struct vm_area_struct *vma,
unsigned int flags)
{
/*
* When core dumping an enormous anonymous area that nobody
* has touched so far, we don't want to allocate unnecessary pages or
* page tables. Return error instead of NULL to skip handle_mm_fault,
* then get_dump_page() will return NULL to leave a hole in the dump.
* But we can only make this optimization where a hole would surely
* be zero-filled if handle_mm_fault() actually did handle it.
*/
if ((flags & FOLL_DUMP) && (!vma->vm_ops || !vma->vm_ops->fault))
return ERR_PTR(-EFAULT);
return NULL;
}
static int follow_pfn_pte(struct vm_area_struct *vma, unsigned long address,
pte_t *pte, unsigned int flags)
{
/* No page to get reference */
if (flags & FOLL_GET)
return -EFAULT;
if (flags & FOLL_TOUCH) {
pte_t entry = *pte;
if (flags & FOLL_WRITE)
entry = pte_mkdirty(entry);
entry = pte_mkyoung(entry);
if (!pte_same(*pte, entry)) {
set_pte_at(vma->vm_mm, address, pte, entry);
update_mmu_cache(vma, address, pte);
}
}
/* Proper page table entry exists, but no corresponding struct page */
return -EEXIST;
}
2016-10-14 04:07:36 +08:00
/*
* FOLL_FORCE can write to even unwritable pte's, but only
* after we've gone through a COW cycle and they are dirty.
*/
static inline bool can_follow_write_pte(pte_t pte, unsigned int flags)
{
Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths" This reverts commits 5c9d2d5c269c, c7da82b894e9, and e7fe7b5cae90. We'll probably need to revisit this, but basically we should not complicate the get_user_pages_fast() case, and checking the actual page table protection key bits will require more care anyway, since the protection keys depend on the exact state of the VM in question. Particularly when doing a "remote" page lookup (ie in somebody elses VM, not your own), you need to be much more careful than this was. Dave Hansen says: "So, the underlying bug here is that we now a get_user_pages_remote() and then go ahead and do the p*_access_permitted() checks against the current PKRU. This was introduced recently with the addition of the new p??_access_permitted() calls. We have checks in the VMA path for the "remote" gups and we avoid consulting PKRU for them. This got missed in the pkeys selftests because I did a ptrace read, but not a *write*. I also didn't explicitly test it against something where a COW needed to be done" It's also not entirely clear that it makes sense to check the protection key bits at this level at all. But one possible eventual solution is to make the get_user_pages_fast() case just abort if it sees protection key bits set, which makes us fall back to the regular get_user_pages() case, which then has a vma and can do the check there if we want to. We'll see. Somewhat related to this all: what we _do_ want to do some day is to check the PAGE_USER bit - it should obviously always be set for user pages, but it would be a good check to have back. Because we have no generic way to test for it, we lost it as part of moving over from the architecture-specific x86 GUP implementation to the generic one in commit e585513b76f7 ("x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"). Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-16 10:53:22 +08:00
return pte_write(pte) ||
2016-10-14 04:07:36 +08:00
((flags & FOLL_FORCE) && (flags & FOLL_COW) && pte_dirty(pte));
}
static struct page *follow_page_pte(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmd, unsigned int flags,
struct dev_pagemap **pgmap)
{
struct mm_struct *mm = vma->vm_mm;
struct page *page;
spinlock_t *ptl;
pte_t *ptep, pte;
retry:
if (unlikely(pmd_bad(*pmd)))
return no_page_table(vma, flags);
ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
pte = *ptep;
if (!pte_present(pte)) {
swp_entry_t entry;
/*
* KSM's break_ksm() relies upon recognizing a ksm page
* even while it is being migrated, so for that case we
* need migration_entry_wait().
*/
if (likely(!(flags & FOLL_MIGRATION)))
goto no_page;
if (pte_none(pte))
goto no_page;
entry = pte_to_swp_entry(pte);
if (!is_migration_entry(entry))
goto no_page;
pte_unmap_unlock(ptep, ptl);
migration_entry_wait(mm, pmd, address);
goto retry;
}
if ((flags & FOLL_NUMA) && pte_protnone(pte))
goto no_page;
2016-10-14 04:07:36 +08:00
if ((flags & FOLL_WRITE) && !can_follow_write_pte(pte, flags)) {
pte_unmap_unlock(ptep, ptl);
return NULL;
}
page = vm_normal_page(vma, address, pte);
if (!page && pte_devmap(pte) && (flags & FOLL_GET)) {
/*
* Only return device mapping pages in the FOLL_GET case since
* they are only valid while holding the pgmap reference.
*/
*pgmap = get_dev_pagemap(pte_pfn(pte), *pgmap);
if (*pgmap)
page = pte_page(pte);
else
goto no_page;
} else if (unlikely(!page)) {
if (flags & FOLL_DUMP) {
/* Avoid special (like zero) pages in core dumps */
page = ERR_PTR(-EFAULT);
goto out;
}
if (is_zero_pfn(pte_pfn(pte))) {
page = pte_page(pte);
} else {
int ret;
ret = follow_pfn_pte(vma, address, ptep, flags);
page = ERR_PTR(ret);
goto out;
}
}
if (flags & FOLL_SPLIT && PageTransCompound(page)) {
int ret;
get_page(page);
pte_unmap_unlock(ptep, ptl);
lock_page(page);
ret = split_huge_page(page);
unlock_page(page);
put_page(page);
if (ret)
return ERR_PTR(ret);
goto retry;
}
if (flags & FOLL_GET) {
if (unlikely(!try_get_page(page))) {
page = ERR_PTR(-ENOMEM);
goto out;
}
}
if (flags & FOLL_TOUCH) {
if ((flags & FOLL_WRITE) &&
!pte_dirty(pte) && !PageDirty(page))
set_page_dirty(page);
/*
* pte_mkyoung() would be more correct here, but atomic care
* is needed to avoid losing the dirty bit: it is easier to use
* mark_page_accessed().
*/
mark_page_accessed(page);
}
mm: introduce VM_LOCKONFAULT The cost of faulting in all memory to be locked can be very high when working with large mappings. If only portions of the mapping will be used this can incur a high penalty for locking. For the example of a large file, this is the usage pattern for a large statical language model (probably applies to other statical or graphical models as well). For the security example, any application transacting in data that cannot be swapped out (credit card data, medical records, etc). This patch introduces the ability to request that pages are not pre-faulted, but are placed on the unevictable LRU when they are finally faulted in. The VM_LOCKONFAULT flag will be used together with VM_LOCKED and has no effect when set without VM_LOCKED. Setting the VM_LOCKONFAULT flag for a VMA will cause pages faulted into that VMA to be added to the unevictable LRU when they are faulted or if they are already present, but will not cause any missing pages to be faulted in. Exposing this new lock state means that we cannot overload the meaning of the FOLL_POPULATE flag any longer. Prior to this patch it was used to mean that the VMA for a fault was locked. This means we need the new FOLL_MLOCK flag to communicate the locked state of a VMA. FOLL_POPULATE will now only control if the VMA should be populated and in the case of VM_LOCKONFAULT, it will not be set. Signed-off-by: Eric B Munson <emunson@akamai.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:51:36 +08:00
if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
thp: allow mlocked THP again Before THP refcounting rework, THP was not allowed to cross VMA boundary. So, if we have THP and we split it, PG_mlocked can be safely transferred to small pages. With new THP refcounting and naive approach to mlocking we can end up with this scenario: 1. we have a mlocked THP, which belong to one VM_LOCKED VMA. 2. the process does munlock() on the *part* of the THP: - the VMA is split into two, one of them VM_LOCKED; - huge PMD split into PTE table; - THP is still mlocked; 3. split_huge_page(): - it transfers PG_mlocked to *all* small pages regrardless if it blong to any VM_LOCKED VMA. We probably could munlock() all small pages on split_huge_page(), but I think we have accounting issue already on step two. Instead of forbidding mlocked pages altogether, we just avoid mlocking PTE-mapped THPs and munlock THPs on split_huge_pmd(). This means PTE-mapped THPs will be on normal lru lists and will be split under memory pressure by vmscan. After the split vmscan will detect unevictable small pages and mlock them. With this approach we shouldn't hit situation like described above. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:54:33 +08:00
/* Do not mlock pte-mapped THP */
if (PageTransCompound(page))
goto out;
/*
* The preliminary mapping check is mainly to avoid the
* pointless overhead of lock_page on the ZERO_PAGE
* which might bounce very badly if there is contention.
*
* If the page is already locked, we don't need to
* handle it now - vmscan will handle it later if and
* when it attempts to reclaim the page.
*/
if (page->mapping && trylock_page(page)) {
lru_add_drain(); /* push cached pages to LRU */
/*
* Because we lock page here, and migration is
* blocked by the pte's page reference, and we
* know the page is still mapped, we don't even
* need to check for file-cache page truncation.
*/
mlock_vma_page(page);
unlock_page(page);
}
}
out:
pte_unmap_unlock(ptep, ptl);
return page;
no_page:
pte_unmap_unlock(ptep, ptl);
if (!pte_none(pte))
return NULL;
return no_page_table(vma, flags);
}
static struct page *follow_pmd_mask(struct vm_area_struct *vma,
unsigned long address, pud_t *pudp,
unsigned int flags,
struct follow_page_context *ctx)
{
pmd_t *pmd, pmdval;
spinlock_t *ptl;
struct page *page;
struct mm_struct *mm = vma->vm_mm;
pmd = pmd_offset(pudp, address);
/*
* The READ_ONCE() will stabilize the pmdval in a register or
* on the stack so that it will stop changing under the code.
*/
pmdval = READ_ONCE(*pmd);
if (pmd_none(pmdval))
return no_page_table(vma, flags);
if (pmd_huge(pmdval) && is_vm_hugetlb_page(vma)) {
mm/hugetlb: take page table lock in follow_huge_pmd() We have a race condition between move_pages() and freeing hugepages, where move_pages() calls follow_page(FOLL_GET) for hugepages internally and tries to get its refcount without preventing concurrent freeing. This race crashes the kernel, so this patch fixes it by moving FOLL_GET code for hugepages into follow_huge_pmd() with taking the page table lock. This patch intentionally removes page==NULL check after pte_page. This is justified because pte_page() never returns NULL for any architectures or configurations. This patch changes the behavior of follow_huge_pmd() for tail pages and then tail pages can be pinned/returned. So the caller must be changed to properly handle the returned tail pages. We could have a choice to add the similar locking to follow_huge_(addr|pud) for consistency, but it's not necessary because currently these functions don't support FOLL_GET flag, so let's leave it for future development. Here is the reproducer: $ cat movepages.c #include <stdio.h> #include <stdlib.h> #include <numaif.h> #define ADDR_INPUT 0x700000000000UL #define HPS 0x200000 #define PS 0x1000 int main(int argc, char *argv[]) { int i; int nr_hp = strtol(argv[1], NULL, 0); int nr_p = nr_hp * HPS / PS; int ret; void **addrs; int *status; int *nodes; pid_t pid; pid = strtol(argv[2], NULL, 0); addrs = malloc(sizeof(char *) * nr_p + 1); status = malloc(sizeof(char *) * nr_p + 1); nodes = malloc(sizeof(char *) * nr_p + 1); while (1) { for (i = 0; i < nr_p; i++) { addrs[i] = (void *)ADDR_INPUT + i * PS; nodes[i] = 1; status[i] = 0; } ret = numa_move_pages(pid, nr_p, addrs, nodes, status, MPOL_MF_MOVE_ALL); if (ret == -1) err("move_pages"); for (i = 0; i < nr_p; i++) { addrs[i] = (void *)ADDR_INPUT + i * PS; nodes[i] = 0; status[i] = 0; } ret = numa_move_pages(pid, nr_p, addrs, nodes, status, MPOL_MF_MOVE_ALL); if (ret == -1) err("move_pages"); } return 0; } $ cat hugepage.c #include <stdio.h> #include <sys/mman.h> #include <string.h> #define ADDR_INPUT 0x700000000000UL #define HPS 0x200000 int main(int argc, char *argv[]) { int nr_hp = strtol(argv[1], NULL, 0); char *p; while (1) { p = mmap((void *)ADDR_INPUT, nr_hp * HPS, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0); if (p != (void *)ADDR_INPUT) { perror("mmap"); break; } memset(p, 0, nr_hp * HPS); munmap(p, nr_hp * HPS); } } $ sysctl vm.nr_hugepages=40 $ ./hugepage 10 & $ ./movepages 10 $(pgrep -f hugepage) Fixes: e632a938d914 ("mm: migrate: add hugepage migration code to move_pages()") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Hugh Dickins <hughd@google.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:25:22 +08:00
page = follow_huge_pmd(mm, address, pmd, flags);
if (page)
return page;
return no_page_table(vma, flags);
}
if (is_hugepd(__hugepd(pmd_val(pmdval)))) {
page = follow_huge_pd(vma, address,
__hugepd(pmd_val(pmdval)), flags,
PMD_SHIFT);
if (page)
return page;
return no_page_table(vma, flags);
}
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
retry:
if (!pmd_present(pmdval)) {
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
if (likely(!(flags & FOLL_MIGRATION)))
return no_page_table(vma, flags);
VM_BUG_ON(thp_migration_supported() &&
!is_pmd_migration_entry(pmdval));
if (is_pmd_migration_entry(pmdval))
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
pmd_migration_entry_wait(mm, pmd);
pmdval = READ_ONCE(*pmd);
/*
* MADV_DONTNEED may convert the pmd to null because
* mmap_sem is held in read mode
*/
if (pmd_none(pmdval))
return no_page_table(vma, flags);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
goto retry;
}
if (pmd_devmap(pmdval)) {
ptl = pmd_lock(mm, pmd);
page = follow_devmap_pmd(vma, address, pmd, flags, &ctx->pgmap);
spin_unlock(ptl);
if (page)
return page;
}
if (likely(!pmd_trans_huge(pmdval)))
return follow_page_pte(vma, address, pmd, flags, &ctx->pgmap);
if ((flags & FOLL_NUMA) && pmd_protnone(pmdval))
return no_page_table(vma, flags);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
retry_locked:
ptl = pmd_lock(mm, pmd);
if (unlikely(pmd_none(*pmd))) {
spin_unlock(ptl);
return no_page_table(vma, flags);
}
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
if (unlikely(!pmd_present(*pmd))) {
spin_unlock(ptl);
if (likely(!(flags & FOLL_MIGRATION)))
return no_page_table(vma, flags);
pmd_migration_entry_wait(mm, pmd);
goto retry_locked;
}
if (unlikely(!pmd_trans_huge(*pmd))) {
spin_unlock(ptl);
return follow_page_pte(vma, address, pmd, flags, &ctx->pgmap);
}
if (flags & (FOLL_SPLIT | FOLL_SPLIT_PMD)) {
int ret;
page = pmd_page(*pmd);
if (is_huge_zero_page(page)) {
spin_unlock(ptl);
ret = 0;
split_huge_pmd(vma, pmd, address);
if (pmd_trans_unstable(pmd))
ret = -EBUSY;
} else if (flags & FOLL_SPLIT) {
if (unlikely(!try_get_page(page))) {
spin_unlock(ptl);
return ERR_PTR(-ENOMEM);
}
spin_unlock(ptl);
lock_page(page);
ret = split_huge_page(page);
unlock_page(page);
put_page(page);
if (pmd_none(*pmd))
return no_page_table(vma, flags);
} else { /* flags & FOLL_SPLIT_PMD */
spin_unlock(ptl);
split_huge_pmd(vma, pmd, address);
ret = pte_alloc(mm, pmd) ? -ENOMEM : 0;
}
return ret ? ERR_PTR(ret) :
follow_page_pte(vma, address, pmd, flags, &ctx->pgmap);
}
page = follow_trans_huge_pmd(vma, address, pmd, flags);
spin_unlock(ptl);
ctx->page_mask = HPAGE_PMD_NR - 1;
return page;
}
static struct page *follow_pud_mask(struct vm_area_struct *vma,
unsigned long address, p4d_t *p4dp,
unsigned int flags,
struct follow_page_context *ctx)
{
pud_t *pud;
spinlock_t *ptl;
struct page *page;
struct mm_struct *mm = vma->vm_mm;
pud = pud_offset(p4dp, address);
if (pud_none(*pud))
return no_page_table(vma, flags);
if (pud_huge(*pud) && is_vm_hugetlb_page(vma)) {
page = follow_huge_pud(mm, address, pud, flags);
if (page)
return page;
return no_page_table(vma, flags);
}
if (is_hugepd(__hugepd(pud_val(*pud)))) {
page = follow_huge_pd(vma, address,
__hugepd(pud_val(*pud)), flags,
PUD_SHIFT);
if (page)
return page;
return no_page_table(vma, flags);
}
if (pud_devmap(*pud)) {
ptl = pud_lock(mm, pud);
page = follow_devmap_pud(vma, address, pud, flags, &ctx->pgmap);
spin_unlock(ptl);
if (page)
return page;
}
if (unlikely(pud_bad(*pud)))
return no_page_table(vma, flags);
return follow_pmd_mask(vma, address, pud, flags, ctx);
}
static struct page *follow_p4d_mask(struct vm_area_struct *vma,
unsigned long address, pgd_t *pgdp,
unsigned int flags,
struct follow_page_context *ctx)
{
p4d_t *p4d;
struct page *page;
p4d = p4d_offset(pgdp, address);
if (p4d_none(*p4d))
return no_page_table(vma, flags);
BUILD_BUG_ON(p4d_huge(*p4d));
if (unlikely(p4d_bad(*p4d)))
return no_page_table(vma, flags);
if (is_hugepd(__hugepd(p4d_val(*p4d)))) {
page = follow_huge_pd(vma, address,
__hugepd(p4d_val(*p4d)), flags,
P4D_SHIFT);
if (page)
return page;
return no_page_table(vma, flags);
}
return follow_pud_mask(vma, address, p4d, flags, ctx);
}
/**
* follow_page_mask - look up a page descriptor from a user-virtual address
* @vma: vm_area_struct mapping @address
* @address: virtual address to look up
* @flags: flags modifying lookup behaviour
* @ctx: contains dev_pagemap for %ZONE_DEVICE memory pinning and a
* pointer to output page_mask
*
* @flags can have FOLL_ flags set, defined in <linux/mm.h>
*
* When getting pages from ZONE_DEVICE memory, the @ctx->pgmap caches
* the device's dev_pagemap metadata to avoid repeating expensive lookups.
*
* On output, the @ctx->page_mask is set according to the size of the page.
*
* Return: the mapped (struct page *), %NULL if no mapping exists, or
* an error pointer if there is a mapping to something not represented
* by a page descriptor (see also vm_normal_page()).
*/
static struct page *follow_page_mask(struct vm_area_struct *vma,
unsigned long address, unsigned int flags,
struct follow_page_context *ctx)
{
pgd_t *pgd;
struct page *page;
struct mm_struct *mm = vma->vm_mm;
ctx->page_mask = 0;
/* make this handle hugepd */
page = follow_huge_addr(mm, address, flags & FOLL_WRITE);
if (!IS_ERR(page)) {
BUG_ON(flags & FOLL_GET);
return page;
}
pgd = pgd_offset(mm, address);
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
return no_page_table(vma, flags);
if (pgd_huge(*pgd)) {
page = follow_huge_pgd(mm, address, pgd, flags);
if (page)
return page;
return no_page_table(vma, flags);
}
if (is_hugepd(__hugepd(pgd_val(*pgd)))) {
page = follow_huge_pd(vma, address,
__hugepd(pgd_val(*pgd)), flags,
PGDIR_SHIFT);
if (page)
return page;
return no_page_table(vma, flags);
}
return follow_p4d_mask(vma, address, pgd, flags, ctx);
}
struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int foll_flags)
{
struct follow_page_context ctx = { NULL };
struct page *page;
page = follow_page_mask(vma, address, foll_flags, &ctx);
if (ctx.pgmap)
put_dev_pagemap(ctx.pgmap);
return page;
}
static int get_gate_page(struct mm_struct *mm, unsigned long address,
unsigned int gup_flags, struct vm_area_struct **vma,
struct page **page)
{
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
int ret = -EFAULT;
/* user gate pages are read-only */
if (gup_flags & FOLL_WRITE)
return -EFAULT;
if (address > TASK_SIZE)
pgd = pgd_offset_k(address);
else
pgd = pgd_offset_gate(mm, address);
if (pgd_none(*pgd))
return -EFAULT;
p4d = p4d_offset(pgd, address);
if (p4d_none(*p4d))
return -EFAULT;
pud = pud_offset(p4d, address);
if (pud_none(*pud))
return -EFAULT;
pmd = pmd_offset(pud, address);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
if (!pmd_present(*pmd))
return -EFAULT;
VM_BUG_ON(pmd_trans_huge(*pmd));
pte = pte_offset_map(pmd, address);
if (pte_none(*pte))
goto unmap;
*vma = get_gate_vma(mm);
if (!page)
goto out;
*page = vm_normal_page(*vma, address, *pte);
if (!*page) {
if ((gup_flags & FOLL_DUMP) || !is_zero_pfn(pte_pfn(*pte)))
goto unmap;
*page = pte_page(*pte);
}
if (unlikely(!try_get_page(*page))) {
ret = -ENOMEM;
goto unmap;
}
out:
ret = 0;
unmap:
pte_unmap(pte);
return ret;
}
/*
* mmap_sem must be held on entry. If @nonblocking != NULL and
* *@flags does not include FOLL_NOWAIT, the mmap_sem may be released.
* If it is, *@nonblocking will be set to 0 and -EBUSY returned.
*/
static int faultin_page(struct task_struct *tsk, struct vm_area_struct *vma,
unsigned long address, unsigned int *flags, int *nonblocking)
{
unsigned int fault_flags = 0;
vm_fault_t ret;
mm: introduce VM_LOCKONFAULT The cost of faulting in all memory to be locked can be very high when working with large mappings. If only portions of the mapping will be used this can incur a high penalty for locking. For the example of a large file, this is the usage pattern for a large statical language model (probably applies to other statical or graphical models as well). For the security example, any application transacting in data that cannot be swapped out (credit card data, medical records, etc). This patch introduces the ability to request that pages are not pre-faulted, but are placed on the unevictable LRU when they are finally faulted in. The VM_LOCKONFAULT flag will be used together with VM_LOCKED and has no effect when set without VM_LOCKED. Setting the VM_LOCKONFAULT flag for a VMA will cause pages faulted into that VMA to be added to the unevictable LRU when they are faulted or if they are already present, but will not cause any missing pages to be faulted in. Exposing this new lock state means that we cannot overload the meaning of the FOLL_POPULATE flag any longer. Prior to this patch it was used to mean that the VMA for a fault was locked. This means we need the new FOLL_MLOCK flag to communicate the locked state of a VMA. FOLL_POPULATE will now only control if the VMA should be populated and in the case of VM_LOCKONFAULT, it will not be set. Signed-off-by: Eric B Munson <emunson@akamai.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:51:36 +08:00
/* mlock all present pages, but do not fault in new pages */
if ((*flags & (FOLL_POPULATE | FOLL_MLOCK)) == FOLL_MLOCK)
return -ENOENT;
if (*flags & FOLL_WRITE)
fault_flags |= FAULT_FLAG_WRITE;
mm/core: Do not enforce PKEY permissions on remote mm access We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:21 +08:00
if (*flags & FOLL_REMOTE)
fault_flags |= FAULT_FLAG_REMOTE;
if (nonblocking)
fault_flags |= FAULT_FLAG_ALLOW_RETRY;
if (*flags & FOLL_NOWAIT)
fault_flags |= FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_RETRY_NOWAIT;
if (*flags & FOLL_TRIED) {
VM_WARN_ON_ONCE(fault_flags & FAULT_FLAG_ALLOW_RETRY);
fault_flags |= FAULT_FLAG_TRIED;
}
ret = handle_mm_fault(vma, address, fault_flags);
if (ret & VM_FAULT_ERROR) {
mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 05:46:46 +08:00
int err = vm_fault_to_errno(ret, *flags);
if (err)
return err;
BUG();
}
if (tsk) {
if (ret & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
}
if (ret & VM_FAULT_RETRY) {
if (nonblocking && !(fault_flags & FAULT_FLAG_RETRY_NOWAIT))
*nonblocking = 0;
return -EBUSY;
}
/*
* The VM_FAULT_WRITE bit tells us that do_wp_page has broken COW when
* necessary, even if maybe_mkwrite decided not to set pte_write. We
* can thus safely do subsequent page lookups as if they were reads.
* But only do so when looping for pte_write is futile: in some cases
* userspace may also be wanting to write to the gotten user page,
* which a read fault here might prevent (a readonly page might get
* reCOWed by userspace write).
*/
if ((ret & VM_FAULT_WRITE) && !(vma->vm_flags & VM_WRITE))
*flags |= FOLL_COW;
return 0;
}
static int check_vma_flags(struct vm_area_struct *vma, unsigned long gup_flags)
{
vm_flags_t vm_flags = vma->vm_flags;
mm/core: Do not enforce PKEY permissions on remote mm access We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:21 +08:00
int write = (gup_flags & FOLL_WRITE);
int foreign = (gup_flags & FOLL_REMOTE);
if (vm_flags & (VM_IO | VM_PFNMAP))
return -EFAULT;
if (gup_flags & FOLL_ANON && !vma_is_anonymous(vma))
return -EFAULT;
mm/core: Do not enforce PKEY permissions on remote mm access We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:21 +08:00
if (write) {
if (!(vm_flags & VM_WRITE)) {
if (!(gup_flags & FOLL_FORCE))
return -EFAULT;
/*
* We used to let the write,force case do COW in a
* VM_MAYWRITE VM_SHARED !VM_WRITE vma, so ptrace could
* set a breakpoint in a read-only mapping of an
* executable, without corrupting the file (yet only
* when that file had been opened for writing!).
* Anon pages in shared mappings are surprising: now
* just reject it.
*/
if (!is_cow_mapping(vm_flags))
return -EFAULT;
}
} else if (!(vm_flags & VM_READ)) {
if (!(gup_flags & FOLL_FORCE))
return -EFAULT;
/*
* Is there actually any vma we can reach here which does not
* have VM_MAYREAD set?
*/
if (!(vm_flags & VM_MAYREAD))
return -EFAULT;
}
mm/core, x86/mm/pkeys: Differentiate instruction fetches As discussed earlier, we attempt to enforce protection keys in software. However, the code checks all faults to ensure that they are not violating protection key permissions. It was assumed that all faults are either write faults where we check PKRU[key].WD (write disable) or read faults where we check the AD (access disable) bit. But, there is a third category of faults for protection keys: instruction faults. Instruction faults never run afoul of protection keys because they do not affect instruction fetches. So, plumb the PF_INSTR bit down in to the arch_vma_access_permitted() function where we do the protection key checks. We also add a new FAULT_FLAG_INSTRUCTION. This is because handle_mm_fault() is not passed the architecture-specific error_code where we keep PF_INSTR, so we need to encode the instruction fetch information in to the arch-generic fault flags. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:24 +08:00
/*
* gups are always data accesses, not instruction
* fetches, so execute=false here
*/
if (!arch_vma_access_permitted(vma, write, false, foreign))
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
return -EFAULT;
return 0;
}
/**
* __get_user_pages() - pin user pages in memory
* @tsk: task_struct of target task
* @mm: mm_struct of target mm
* @start: starting user address
* @nr_pages: number of pages from start to pin
* @gup_flags: flags modifying pin behaviour
* @pages: array that receives pointers to the pages pinned.
* Should be at least nr_pages long. Or NULL, if caller
* only intends to ensure the pages are faulted in.
* @vmas: array of pointers to vmas corresponding to each page.
* Or NULL if the caller does not require them.
* @nonblocking: whether waiting for disk IO or mmap_sem contention
*
* Returns either number of pages pinned (which may be less than the
* number requested), or an error. Details about the return value:
*
* -- If nr_pages is 0, returns 0.
* -- If nr_pages is >0, but no pages were pinned, returns -errno.
* -- If nr_pages is >0, and some pages were pinned, returns the number of
* pages pinned. Again, this may be less than nr_pages.
*
* The caller is responsible for releasing returned @pages, via put_page().
*
* @vmas are valid only as long as mmap_sem is held.
*
* Must be called with mmap_sem held. It may be released. See below.
*
* __get_user_pages walks a process's page tables and takes a reference to
* each struct page that each user address corresponds to at a given
* instant. That is, it takes the page that would be accessed if a user
* thread accesses the given user virtual address at that instant.
*
* This does not guarantee that the page exists in the user mappings when
* __get_user_pages returns, and there may even be a completely different
* page there in some cases (eg. if mmapped pagecache has been invalidated
* and subsequently re faulted). However it does guarantee that the page
* won't be freed completely. And mostly callers simply care that the page
* contains data that was valid *at some point in time*. Typically, an IO
* or similar operation cannot guarantee anything stronger anyway because
* locks can't be held over the syscall boundary.
*
* If @gup_flags & FOLL_WRITE == 0, the page must not be written to. If
* the page is written to, set_page_dirty (or set_page_dirty_lock, as
* appropriate) must be called after the page is finished with, and
* before put_page is called.
*
* If @nonblocking != NULL, __get_user_pages will not wait for disk IO
* or mmap_sem contention, and if waiting is needed to pin all pages,
* *@nonblocking will be set to 0. Further, if @gup_flags does not
* include FOLL_NOWAIT, the mmap_sem will be released via up_read() in
* this case.
*
* A caller using such a combination of @nonblocking and @gup_flags
* must therefore hold the mmap_sem for reading only, and recognize
* when it's been released. Otherwise, it must be held for either
* reading or writing and will not be released.
*
* In most cases, get_user_pages or get_user_pages_fast should be used
* instead of __get_user_pages. __get_user_pages should be used only if
* you need some special @gup_flags.
*/
static long __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, unsigned long nr_pages,
unsigned int gup_flags, struct page **pages,
struct vm_area_struct **vmas, int *nonblocking)
{
long ret = 0, i = 0;
struct vm_area_struct *vma = NULL;
struct follow_page_context ctx = { NULL };
if (!nr_pages)
return 0;
start = untagged_addr(start);
VM_BUG_ON(!!pages != !!(gup_flags & FOLL_GET));
/*
* If FOLL_FORCE is set then do not force a full fault as the hinting
* fault information is unrelated to the reference behaviour of a task
* using the address space
*/
if (!(gup_flags & FOLL_FORCE))
gup_flags |= FOLL_NUMA;
do {
struct page *page;
unsigned int foll_flags = gup_flags;
unsigned int page_increm;
/* first iteration or cross vma bound */
if (!vma || start >= vma->vm_end) {
vma = find_extend_vma(mm, start);
if (!vma && in_gate_area(mm, start)) {
ret = get_gate_page(mm, start & PAGE_MASK,
gup_flags, &vma,
pages ? &pages[i] : NULL);
if (ret)
mm/gup: finish consolidating error handling Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") attempted to operate on each page that get_user_pages had retrieved. In order to do that, it created a common exit point from the routine. However, one case was missed, which this patch fixes up. Also, there was still an unnecessary shadow declaration (with a different type) of the "ret" variable, which this patch removes. Keith's description of the situation is: This also fixes a potentially leaked dev_pagemap reference count if a failure occurs when an iteration crosses a vma boundary. I don't think it's normal to have different vma's on a users mapped zone device memory, but good to fix anyway. I actually thought that this code: /* first iteration or cross vma bound */ if (!vma || start >= vma->vm_end) { vma = find_extend_vma(mm, start); if (!vma && in_gate_area(mm, start)) { ret = get_gate_page(mm, start & PAGE_MASK, gup_flags, &vma, pages ? &pages[i] : NULL); if (ret) goto out; dealt with the "you're trying to pin the gate page, as part of this call", rather than the generic case of crossing a vma boundary. (I think there's a fine point that I must be overlooking.) But it's still a valid case, either way. Link: http://lkml.kernel.org/r/20181121081402.29641-2-jhubbard@nvidia.com Fixes: df06b37ffe5a4 ("mm/gup: cache dev_pagemap while pinning pages") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-01 06:08:53 +08:00
goto out;
ctx.page_mask = 0;
goto next_page;
}
if (!vma || check_vma_flags(vma, gup_flags)) {
ret = -EFAULT;
goto out;
}
if (is_vm_hugetlb_page(vma)) {
i = follow_hugetlb_page(mm, vma, pages, vmas,
&start, &nr_pages, i,
gup_flags, nonblocking);
continue;
}
}
retry:
/*
* If we have a pending SIGKILL, don't keep faulting pages and
* potentially allocating memory.
*/
if (fatal_signal_pending(current)) {
ret = -ERESTARTSYS;
goto out;
}
cond_resched();
page = follow_page_mask(vma, start, foll_flags, &ctx);
if (!page) {
ret = faultin_page(tsk, vma, start, &foll_flags,
nonblocking);
switch (ret) {
case 0:
goto retry;
case -EBUSY:
ret = 0;
/* FALLTHRU */
case -EFAULT:
case -ENOMEM:
case -EHWPOISON:
goto out;
case -ENOENT:
goto next_page;
}
BUG();
} else if (PTR_ERR(page) == -EEXIST) {
/*
* Proper page table entry exists, but no corresponding
* struct page.
*/
goto next_page;
} else if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
}
if (pages) {
pages[i] = page;
flush_anon_page(vma, page, start);
flush_dcache_page(page);
ctx.page_mask = 0;
}
next_page:
if (vmas) {
vmas[i] = vma;
ctx.page_mask = 0;
}
page_increm = 1 + (~(start >> PAGE_SHIFT) & ctx.page_mask);
if (page_increm > nr_pages)
page_increm = nr_pages;
i += page_increm;
start += page_increm * PAGE_SIZE;
nr_pages -= page_increm;
} while (nr_pages);
out:
if (ctx.pgmap)
put_dev_pagemap(ctx.pgmap);
return i ? i : ret;
}
static bool vma_permits_fault(struct vm_area_struct *vma,
unsigned int fault_flags)
{
mm/core: Do not enforce PKEY permissions on remote mm access We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:21 +08:00
bool write = !!(fault_flags & FAULT_FLAG_WRITE);
bool foreign = !!(fault_flags & FAULT_FLAG_REMOTE);
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
vm_flags_t vm_flags = write ? VM_WRITE : VM_READ;
if (!(vm_flags & vma->vm_flags))
return false;
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
/*
* The architecture might have a hardware protection
mm/core: Do not enforce PKEY permissions on remote mm access We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:21 +08:00
* mechanism other than read/write that can deny access.
mm/core, x86/mm/pkeys: Differentiate instruction fetches As discussed earlier, we attempt to enforce protection keys in software. However, the code checks all faults to ensure that they are not violating protection key permissions. It was assumed that all faults are either write faults where we check PKRU[key].WD (write disable) or read faults where we check the AD (access disable) bit. But, there is a third category of faults for protection keys: instruction faults. Instruction faults never run afoul of protection keys because they do not affect instruction fetches. So, plumb the PF_INSTR bit down in to the arch_vma_access_permitted() function where we do the protection key checks. We also add a new FAULT_FLAG_INSTRUCTION. This is because handle_mm_fault() is not passed the architecture-specific error_code where we keep PF_INSTR, so we need to encode the instruction fetch information in to the arch-generic fault flags. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:24 +08:00
*
* gup always represents data access, not instruction
* fetches, so execute=false here:
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
*/
mm/core, x86/mm/pkeys: Differentiate instruction fetches As discussed earlier, we attempt to enforce protection keys in software. However, the code checks all faults to ensure that they are not violating protection key permissions. It was assumed that all faults are either write faults where we check PKRU[key].WD (write disable) or read faults where we check the AD (access disable) bit. But, there is a third category of faults for protection keys: instruction faults. Instruction faults never run afoul of protection keys because they do not affect instruction fetches. So, plumb the PF_INSTR bit down in to the arch_vma_access_permitted() function where we do the protection key checks. We also add a new FAULT_FLAG_INSTRUCTION. This is because handle_mm_fault() is not passed the architecture-specific error_code where we keep PF_INSTR, so we need to encode the instruction fetch information in to the arch-generic fault flags. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210224.96928009@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:24 +08:00
if (!arch_vma_access_permitted(vma, write, false, foreign))
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 05:02:19 +08:00
return false;
return true;
}
/*
* fixup_user_fault() - manually resolve a user page fault
* @tsk: the task_struct to use for page fault accounting, or
* NULL if faults are not to be recorded.
* @mm: mm_struct of target mm
* @address: user address
* @fault_flags:flags to pass down to handle_mm_fault()
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
* @unlocked: did we unlock the mmap_sem while retrying, maybe NULL if caller
* does not allow retry
*
* This is meant to be called in the specific scenario where for locking reasons
* we try to access user memory in atomic context (within a pagefault_disable()
* section), this returns -EFAULT, and we want to resolve the user fault before
* trying again.
*
* Typically this is meant to be used by the futex code.
*
* The main difference with get_user_pages() is that this function will
* unconditionally call handle_mm_fault() which will in turn perform all the
* necessary SW fixup of the dirty and young bits in the PTE, while
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
* get_user_pages() only guarantees to update these in the struct page.
*
* This is important for some architectures where those bits also gate the
* access permission to the page because they are maintained in software. On
* such architectures, gup() will not be enough to make a subsequent access
* succeed.
*
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
* This function will not return with an unlocked mmap_sem. So it has not the
* same semantics wrt the @mm->mmap_sem as does filemap_fault().
*/
int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
unsigned long address, unsigned int fault_flags,
bool *unlocked)
{
struct vm_area_struct *vma;
vm_fault_t ret, major = 0;
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
address = untagged_addr(address);
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
if (unlocked)
fault_flags |= FAULT_FLAG_ALLOW_RETRY;
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
retry:
vma = find_extend_vma(mm, address);
if (!vma || address < vma->vm_start)
return -EFAULT;
if (!vma_permits_fault(vma, fault_flags))
return -EFAULT;
ret = handle_mm_fault(vma, address, fault_flags);
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
major |= ret & VM_FAULT_MAJOR;
if (ret & VM_FAULT_ERROR) {
mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a special case. (check_user_page_hwpoison()) When huge pages are involved, this doesn't work so well. get_user_pages() calls follow_hugetlb_page(), which stops early if it receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning -EFAULT to the caller. The step to map this to -EHWPOISON based on the FOLL_ flags is missing. The hwpoison special case is skipped, and -EFAULT is returned to user-space, causing Qemu or kvmtool to exit. Instead, move this VM_FAULT_ to errno mapping code into a header file and use it from faultin_page() and follow_hugetlb_page(). With this, KVM works as expected. This isn't a problem for arm64 today as we haven't enabled MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86 too, so I think this should be a fix. This doesn't apply earlier than stable's v4.11.1 due to all sorts of cleanup. [james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()] suggested. Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [4.11.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-03 05:46:46 +08:00
int err = vm_fault_to_errno(ret, 0);
if (err)
return err;
BUG();
}
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
if (ret & VM_FAULT_RETRY) {
down_read(&mm->mmap_sem);
if (!(fault_flags & FAULT_FLAG_TRIED)) {
*unlocked = true;
fault_flags &= ~FAULT_FLAG_ALLOW_RETRY;
fault_flags |= FAULT_FLAG_TRIED;
goto retry;
}
}
if (tsk) {
mm: bring in additional flag for fixup_user_fault to signal unlock During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:57:04 +08:00
if (major)
tsk->maj_flt++;
else
tsk->min_flt++;
}
return 0;
}
EXPORT_SYMBOL_GPL(fixup_user_fault);
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
static __always_inline long __get_user_pages_locked(struct task_struct *tsk,
struct mm_struct *mm,
unsigned long start,
unsigned long nr_pages,
struct page **pages,
struct vm_area_struct **vmas,
int *locked,
unsigned int flags)
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
{
long ret, pages_done;
bool lock_dropped;
if (locked) {
/* if VM_FAULT_RETRY can be returned, vmas become invalid */
BUG_ON(vmas);
/* check caller initialized locked */
BUG_ON(*locked != 1);
}
if (pages)
flags |= FOLL_GET;
pages_done = 0;
lock_dropped = false;
for (;;) {
ret = __get_user_pages(tsk, mm, start, nr_pages, flags, pages,
vmas, locked);
if (!locked)
/* VM_FAULT_RETRY couldn't trigger, bypass */
return ret;
/* VM_FAULT_RETRY cannot return errors */
if (!*locked) {
BUG_ON(ret < 0);
BUG_ON(ret >= nr_pages);
}
if (ret > 0) {
nr_pages -= ret;
pages_done += ret;
if (!nr_pages)
break;
}
if (*locked) {
/*
* VM_FAULT_RETRY didn't trigger or it was a
* FOLL_NOWAIT.
*/
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
if (!pages_done)
pages_done = ret;
break;
}
mm/gup: continue VM_FAULT_RETRY processing even for pre-faults When get_user_pages*() is called with pages = NULL, the processing of VM_FAULT_RETRY terminates early without actually retrying to fault-in all the pages. If the pages in the requested range belong to a VMA that has userfaultfd registered, handle_userfault() returns VM_FAULT_RETRY *after* user space has populated the page, but for the gup pre-fault case there's no actual retry and the caller will get no pages although they are present. This issue was uncovered when running post-copy memory restore in CRIU after d9c9ce34ed5c ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails"). After this change, the copying of FPU state to the sigframe switched from copy_to_user() variants which caused a real page fault to get_user_pages() with pages parameter set to NULL. In post-copy mode of CRIU, the destination memory is managed with userfaultfd and lack of the retry for pre-fault case in get_user_pages() causes a crash of the restored process. Making the pre-fault behavior of get_user_pages() the same as the "normal" one fixes the issue. Link: http://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com Fixes: d9c9ce34ed5c ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Andrei Vagin <avagin@gmail.com> [https://travis-ci.org/avagin/linux/builds/533184940] Tested-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-01 13:30:33 +08:00
/*
* VM_FAULT_RETRY triggered, so seek to the faulting offset.
* For the prefault case (!pages) we only update counts.
*/
if (likely(pages))
pages += ret;
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
start += ret << PAGE_SHIFT;
/*
* Repeat on the address that fired VM_FAULT_RETRY
* without FAULT_FLAG_ALLOW_RETRY but with
* FAULT_FLAG_TRIED.
*/
*locked = 1;
lock_dropped = true;
down_read(&mm->mmap_sem);
ret = __get_user_pages(tsk, mm, start, 1, flags | FOLL_TRIED,
pages, NULL, NULL);
if (ret != 1) {
BUG_ON(ret > 1);
if (!pages_done)
pages_done = ret;
break;
}
nr_pages--;
pages_done++;
if (!nr_pages)
break;
mm/gup: continue VM_FAULT_RETRY processing even for pre-faults When get_user_pages*() is called with pages = NULL, the processing of VM_FAULT_RETRY terminates early without actually retrying to fault-in all the pages. If the pages in the requested range belong to a VMA that has userfaultfd registered, handle_userfault() returns VM_FAULT_RETRY *after* user space has populated the page, but for the gup pre-fault case there's no actual retry and the caller will get no pages although they are present. This issue was uncovered when running post-copy memory restore in CRIU after d9c9ce34ed5c ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails"). After this change, the copying of FPU state to the sigframe switched from copy_to_user() variants which caused a real page fault to get_user_pages() with pages parameter set to NULL. In post-copy mode of CRIU, the destination memory is managed with userfaultfd and lack of the retry for pre-fault case in get_user_pages() causes a crash of the restored process. Making the pre-fault behavior of get_user_pages() the same as the "normal" one fixes the issue. Link: http://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com Fixes: d9c9ce34ed5c ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Andrei Vagin <avagin@gmail.com> [https://travis-ci.org/avagin/linux/builds/533184940] Tested-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-01 13:30:33 +08:00
if (likely(pages))
pages++;
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
start += PAGE_SIZE;
}
if (lock_dropped && *locked) {
mm: gup: add get_user_pages_locked and get_user_pages_unlocked FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 07:27:17 +08:00
/*
* We must let the caller know we temporarily dropped the lock
* and so the critical section protected by it was lost.
*/
up_read(&mm->mmap_sem);
*locked = 0;
}
return pages_done;
}
/**
* populate_vma_page_range() - populate a range of pages in the vma.
* @vma: target vma
* @start: start address
* @end: end address
* @nonblocking:
*
* This takes care of mlocking the pages too if VM_LOCKED is set.
*
* return 0 on success, negative error code on error.
*
* vma->vm_mm->mmap_sem must be held.
*
* If @nonblocking is NULL, it may be held for read or write and will
* be unperturbed.
*
* If @nonblocking is non-NULL, it must held for read only and may be
* released. If it's released, *@nonblocking will be set to 0.
*/
long populate_vma_page_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end, int *nonblocking)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long nr_pages = (end - start) / PAGE_SIZE;
int gup_flags;
VM_BUG_ON(start & ~PAGE_MASK);
VM_BUG_ON(end & ~PAGE_MASK);
VM_BUG_ON_VMA(start < vma->vm_start, vma);
VM_BUG_ON_VMA(end > vma->vm_end, vma);
VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_sem), mm);
gup_flags = FOLL_TOUCH | FOLL_POPULATE | FOLL_MLOCK;
if (vma->vm_flags & VM_LOCKONFAULT)
gup_flags &= ~FOLL_POPULATE;
/*
* We want to touch writable mappings with a write fault in order
* to break COW, except for shared mappings because these don't COW
* and we would not want to dirty them for nothing.
*/
if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE)
gup_flags |= FOLL_WRITE;
/*
* We want mlock to succeed for regions that have any permissions
* other than PROT_NONE.
*/
if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))
gup_flags |= FOLL_FORCE;
/*
* We made sure addr is within a VMA, so the following will
* not result in a stack expansion that recurses back here.
*/
return __get_user_pages(current, mm, start, nr_pages, gup_flags,
NULL, NULL, nonblocking);
}
/*
* __mm_populate - populate and/or mlock pages within a range of address space.
*
* This is used to implement mlock() and the MAP_POPULATE / MAP_LOCKED mmap
* flags. VMAs must be already marked with the desired vm_flags, and
* mmap_sem must not be held.
*/
int __mm_populate(unsigned long start, unsigned long len, int ignore_errors)
{
struct mm_struct *mm = current->mm;
unsigned long end, nstart, nend;
struct vm_area_struct *vma = NULL;
int locked = 0;
long ret = 0;
end = start + len;
for (nstart = start; nstart < end; nstart = nend) {
/*
* We want to fault in pages for [nstart; end) address range.
* Find first corresponding VMA.
*/
if (!locked) {
locked = 1;
down_read(&mm->mmap_sem);
vma = find_vma(mm, nstart);
} else if (nstart >= vma->vm_end)
vma = vma->vm_next;
if (!vma || vma->vm_start >= end)
break;
/*
* Set [nstart; nend) to intersection of desired address
* range with the first VMA. Also, skip undesirable VMA types.
*/
nend = min(end, vma->vm_end);
if (vma->vm_flags & (VM_IO | VM_PFNMAP))
continue;
if (nstart < vma->vm_start)
nstart = vma->vm_start;
/*
* Now fault in a range of pages. populate_vma_page_range()
* double checks the vma flags, so that it won't mlock pages
* if the vma was already munlocked.
*/
ret = populate_vma_page_range(vma, nstart, nend, &locked);
if (ret < 0) {
if (ignore_errors) {
ret = 0;
continue; /* continue at next VMA */
}
break;
}
nend = nstart + ret * PAGE_SIZE;
ret = 0;
}
if (locked)
up_read(&mm->mmap_sem);
return ret; /* 0 or negative error code */
}
/**
* get_dump_page() - pin user page in memory while writing it to core dump
* @addr: user address
*
* Returns struct page pointer of user page pinned for dump,
* to be freed afterwards by put_page().
*
* Returns NULL on any kind of failure - a hole must then be inserted into
* the corefile, to preserve alignment with its headers; and also returns
* NULL wherever the ZERO_PAGE, or an anonymous pte_none, has been found -
* allowing a hole to be left in the corefile to save diskspace.
*
* Called without mmap_sem, but after all other threads have been killed.
*/
#ifdef CONFIG_ELF_CORE
struct page *get_dump_page(unsigned long addr)
{
struct vm_area_struct *vma;
struct page *page;
if (__get_user_pages(current, current->mm, addr, 1,
FOLL_FORCE | FOLL_DUMP | FOLL_GET, &page, &vma,
NULL) < 1)
return NULL;
flush_cache_page(vma, addr, page_to_pfn(page));
return page;
}
#endif /* CONFIG_ELF_CORE */
#else /* CONFIG_MMU */
static long __get_user_pages_locked(struct task_struct *tsk,
struct mm_struct *mm, unsigned long start,
unsigned long nr_pages, struct page **pages,
struct vm_area_struct **vmas, int *locked,
unsigned int foll_flags)
{
struct vm_area_struct *vma;
unsigned long vm_flags;
int i;
/* calculate required read or write permissions.
* If FOLL_FORCE is set, we only require the "MAY" flags.
*/
vm_flags = (foll_flags & FOLL_WRITE) ?
(VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
vm_flags &= (foll_flags & FOLL_FORCE) ?
(VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
for (i = 0; i < nr_pages; i++) {
vma = find_vma(mm, start);
if (!vma)
goto finish_or_fault;
/* protect what we can, including chardevs */
if ((vma->vm_flags & (VM_IO | VM_PFNMAP)) ||
!(vm_flags & vma->vm_flags))
goto finish_or_fault;
if (pages) {
pages[i] = virt_to_page(start);
if (pages[i])
get_page(pages[i]);
}
if (vmas)
vmas[i] = vma;
start = (start + PAGE_SIZE) & PAGE_MASK;
}
return i;
finish_or_fault:
return i ? : -EFAULT;
}
#endif /* !CONFIG_MMU */
#if defined(CONFIG_FS_DAX) || defined (CONFIG_CMA)
static bool check_dax_vmas(struct vm_area_struct **vmas, long nr_pages)
{
long i;
struct vm_area_struct *vma_prev = NULL;
for (i = 0; i < nr_pages; i++) {
struct vm_area_struct *vma = vmas[i];
if (vma == vma_prev)
continue;
vma_prev = vma;
if (vma_is_fsdax(vma))
return true;
}
return false;
}
#ifdef CONFIG_CMA
static struct page *new_non_cma_page(struct page *page, unsigned long private)
{
/*
* We want to make sure we allocate the new page from the same node
* as the source page.
*/
int nid = page_to_nid(page);
/*
* Trying to allocate a page for migration. Ignore allocation
* failure warnings. We don't force __GFP_THISNODE here because
* this node here is the node where we have CMA reservation and
* in some case these nodes will have really less non movable
* allocation memory.
*/
gfp_t gfp_mask = GFP_USER | __GFP_NOWARN;
if (PageHighMem(page))
gfp_mask |= __GFP_HIGHMEM;
#ifdef CONFIG_HUGETLB_PAGE
if (PageHuge(page)) {
struct hstate *h = page_hstate(page);
/*
* We don't want to dequeue from the pool because pool pages will
* mostly be from the CMA region.
*/
return alloc_migrate_huge_page(h, gfp_mask, nid, NULL);
}
#endif
if (PageTransHuge(page)) {
struct page *thp;
/*
* ignore allocation failure warnings
*/
gfp_t thp_gfpmask = GFP_TRANSHUGE | __GFP_NOWARN;
/*
* Remove the movable mask so that we don't allocate from
* CMA area again.
*/
thp_gfpmask &= ~__GFP_MOVABLE;
thp = __alloc_pages_node(nid, thp_gfpmask, HPAGE_PMD_ORDER);
if (!thp)
return NULL;
prep_transhuge_page(thp);
return thp;
}
return __alloc_pages_node(nid, gfp_mask, 0);
}
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
static long check_and_migrate_cma_pages(struct task_struct *tsk,
struct mm_struct *mm,
unsigned long start,
unsigned long nr_pages,
struct page **pages,
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
struct vm_area_struct **vmas,
unsigned int gup_flags)
{
unsigned long i;
unsigned long step;
bool drain_allow = true;
bool migrate_allow = true;
LIST_HEAD(cma_page_list);
long ret = nr_pages;
check_again:
for (i = 0; i < nr_pages;) {
struct page *head = compound_head(pages[i]);
/*
* gup may start from a tail page. Advance step by the left
* part.
*/
step = compound_nr(head) - (pages[i] - head);
/*
* If we get a page from the CMA zone, since we are going to
* be pinning these entries, we might as well move them out
* of the CMA zone if possible.
*/
if (is_migrate_cma_page(head)) {
if (PageHuge(head))
isolate_huge_page(head, &cma_page_list);
else {
if (!PageLRU(head) && drain_allow) {
lru_add_drain_all();
drain_allow = false;
}
if (!isolate_lru_page(head)) {
list_add_tail(&head->lru, &cma_page_list);
mod_node_page_state(page_pgdat(head),
NR_ISOLATED_ANON +
page_is_file_cache(head),
hpage_nr_pages(head));
}
}
}
i += step;
}
if (!list_empty(&cma_page_list)) {
/*
* drop the above get_user_pages reference.
*/
for (i = 0; i < nr_pages; i++)
put_page(pages[i]);
if (migrate_pages(&cma_page_list, new_non_cma_page,
NULL, 0, MIGRATE_SYNC, MR_CONTIG_RANGE)) {
/*
* some of the pages failed migration. Do get_user_pages
* without migration.
*/
migrate_allow = false;
if (!list_empty(&cma_page_list))
putback_movable_pages(&cma_page_list);
}
/*
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
* We did migrate all the pages, Try to get the page references
* again migrating any new CMA pages which we failed to isolate
* earlier.
*/
ret = __get_user_pages_locked(tsk, mm, start, nr_pages,
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
pages, vmas, NULL,
gup_flags);
if ((ret > 0) && migrate_allow) {
nr_pages = ret;
drain_allow = true;
goto check_again;
}
}
return ret;
}
#else
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
static long check_and_migrate_cma_pages(struct task_struct *tsk,
struct mm_struct *mm,
unsigned long start,
unsigned long nr_pages,
struct page **pages,
struct vm_area_struct **vmas,
unsigned int gup_flags)
{
return nr_pages;
}
#endif /* CONFIG_CMA */
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
/*
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
* __gup_longterm_locked() is a wrapper for __get_user_pages_locked which
* allows us to process the FOLL_LONGTERM flag.
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
*/
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
static long __gup_longterm_locked(struct task_struct *tsk,
struct mm_struct *mm,
unsigned long start,
unsigned long nr_pages,
struct page **pages,
struct vm_area_struct **vmas,
unsigned int gup_flags)
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
{
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
struct vm_area_struct **vmas_tmp = vmas;
unsigned long flags = 0;
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
long rc, i;
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
if (gup_flags & FOLL_LONGTERM) {
if (!pages)
return -EINVAL;
if (!vmas_tmp) {
vmas_tmp = kcalloc(nr_pages,
sizeof(struct vm_area_struct *),
GFP_KERNEL);
if (!vmas_tmp)
return -ENOMEM;
}
flags = memalloc_nocma_save();
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
}
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
rc = __get_user_pages_locked(tsk, mm, start, nr_pages, pages,
vmas_tmp, NULL, gup_flags);
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
if (gup_flags & FOLL_LONGTERM) {
memalloc_nocma_restore(flags);
if (rc < 0)
goto out;
if (check_dax_vmas(vmas_tmp, rc)) {
for (i = 0; i < rc; i++)
put_page(pages[i]);
rc = -EOPNOTSUPP;
goto out;
}
rc = check_and_migrate_cma_pages(tsk, mm, start, rc, pages,
vmas_tmp, gup_flags);
}
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
out:
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
if (vmas_tmp != vmas)
kfree(vmas_tmp);
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
return rc;
}
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
#else /* !CONFIG_FS_DAX && !CONFIG_CMA */
static __always_inline long __gup_longterm_locked(struct task_struct *tsk,
struct mm_struct *mm,
unsigned long start,
unsigned long nr_pages,
struct page **pages,
struct vm_area_struct **vmas,
unsigned int flags)
{
return __get_user_pages_locked(tsk, mm, start, nr_pages, pages, vmas,
NULL, flags);
}
#endif /* CONFIG_FS_DAX || CONFIG_CMA */
mm: fix get_user_pages_remote()'s handling of FOLL_LONGTERM As it says in the updated comment in gup.c: current FOLL_LONGTERM behavior is incompatible with FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on vmas. However, the corresponding restriction in get_user_pages_remote() was slightly stricter than is actually required: it forbade all FOLL_LONGTERM callers, but we can actually allow FOLL_LONGTERM callers that do not set the "locked" arg. Update the code and comments to loosen the restriction, allowing FOLL_LONGTERM in some cases. Also, copy the DAX check ("if a VMA is DAX, don't allow long term pinning") from the VFIO call site, all the way into the internals of get_user_pages_remote() and __gup_longterm_locked(). That is: get_user_pages_remote() calls __gup_longterm_locked(), which in turn calls check_dax_vmas(). This check will then be removed from the VFIO call site in a subsequent patch. Thanks to Jason Gunthorpe for pointing out a clean way to fix this, and to Dan Williams for helping clarify the DAX refactoring. Link: http://lkml.kernel.org/r/20200107224558.2362728-7-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:36 +08:00
/*
* get_user_pages_remote() - pin user pages in memory
* @tsk: the task_struct to use for page fault accounting, or
* NULL if faults are not to be recorded.
* @mm: mm_struct of target mm
* @start: starting user address
* @nr_pages: number of pages from start to pin
* @gup_flags: flags modifying lookup behaviour
* @pages: array that receives pointers to the pages pinned.
* Should be at least nr_pages long. Or NULL, if caller
* only intends to ensure the pages are faulted in.
* @vmas: array of pointers to vmas corresponding to each page.
* Or NULL if the caller does not require them.
* @locked: pointer to lock flag indicating whether lock is held and
* subsequently whether VM_FAULT_RETRY functionality can be
* utilised. Lock must initially be held.
*
* Returns either number of pages pinned (which may be less than the
* number requested), or an error. Details about the return value:
*
* -- If nr_pages is 0, returns 0.
* -- If nr_pages is >0, but no pages were pinned, returns -errno.
* -- If nr_pages is >0, and some pages were pinned, returns the number of
* pages pinned. Again, this may be less than nr_pages.
*
* The caller is responsible for releasing returned @pages, via put_page().
*
* @vmas are valid only as long as mmap_sem is held.
*
* Must be called with mmap_sem held for read or write.
*
* get_user_pages walks a process's page tables and takes a reference to
* each struct page that each user address corresponds to at a given
* instant. That is, it takes the page that would be accessed if a user
* thread accesses the given user virtual address at that instant.
*
* This does not guarantee that the page exists in the user mappings when
* get_user_pages returns, and there may even be a completely different
* page there in some cases (eg. if mmapped pagecache has been invalidated
* and subsequently re faulted). However it does guarantee that the page
* won't be freed completely. And mostly callers simply care that the page
* contains data that was valid *at some point in time*. Typically, an IO
* or similar operation cannot guarantee anything stronger anyway because
* locks can't be held over the syscall boundary.
*
* If gup_flags & FOLL_WRITE == 0, the page must not be written to. If the page
* is written to, set_page_dirty (or set_page_dirty_lock, as appropriate) must
* be called after the page is finished with, and before put_page is called.
*
* get_user_pages is typically used for fewer-copy IO operations, to get a
* handle on the memory by some means other than accesses via the user virtual
* addresses. The pages may be submitted for DMA to devices or accessed via
* their kernel linear mapping (via the kmap APIs). Care should be taken to
* use the correct cache flushing APIs.
*
* See also get_user_pages_fast, for performance critical applications.
*
* get_user_pages should be phased out in favor of
* get_user_pages_locked|unlocked or get_user_pages_fast. Nothing
* should use get_user_pages because it cannot pass
* FAULT_FLAG_ALLOW_RETRY to handle_mm_fault.
*/
long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, unsigned long nr_pages,
unsigned int gup_flags, struct page **pages,
struct vm_area_struct **vmas, int *locked)
{
/*
* Parts of FOLL_LONGTERM behavior are incompatible with
* FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on
* vmas. However, this only comes up if locked is set, and there are
* callers that do request FOLL_LONGTERM, but do not set locked. So,
* allow what we can.
*/
if (gup_flags & FOLL_LONGTERM) {
if (WARN_ON_ONCE(locked))
return -EINVAL;
/*
* This will check the vmas (even if our vmas arg is NULL)
* and return -ENOTSUPP if DAX isn't allowed in this case:
*/
return __gup_longterm_locked(tsk, mm, start, nr_pages, pages,
vmas, gup_flags | FOLL_TOUCH |
FOLL_REMOTE);
}
return __get_user_pages_locked(tsk, mm, start, nr_pages, pages, vmas,
locked,
gup_flags | FOLL_TOUCH | FOLL_REMOTE);
}
EXPORT_SYMBOL(get_user_pages_remote);
mm/gup: replace get_user_pages_longterm() with FOLL_LONGTERM Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:03 +08:00
/*
* This is the same as get_user_pages_remote(), just with a
* less-flexible calling convention where we assume that the task
* and mm being operated on are the current task's and don't allow
* passing of a locked parameter. We also obviously don't pass
* FOLL_REMOTE in here.
*/
long get_user_pages(unsigned long start, unsigned long nr_pages,
unsigned int gup_flags, struct page **pages,
struct vm_area_struct **vmas)
{
return __gup_longterm_locked(current, current->mm, start, nr_pages,
pages, vmas, gup_flags | FOLL_TOUCH);
}
EXPORT_SYMBOL(get_user_pages);
mm: introduce get_user_pages_longterm Patch series "introduce get_user_pages_longterm()", v2. Here is a new get_user_pages api for cases where a driver intends to keep an elevated page count indefinitely. This is distinct from usages like iov_iter_get_pages where the elevated page counts are transient. The iov_iter_get_pages cases immediately turn around and submit the pages to a device driver which will put_page when the i/o operation completes (under kernel control). In the longterm case userspace is responsible for dropping the page reference at some undefined point in the future. This is untenable for filesystem-dax case where the filesystem is in control of the lifetime of the block / page and needs reasonable limits on how long it can wait for pages in a mapping to become idle. Fixing filesystems to actually wait for dax pages to be idle before blocks from a truncate/hole-punch operation are repurposed is saved for a later patch series. Also, allowing longterm registration of dax mappings is a future patch series that introduces a "map with lease" semantic where the kernel can revoke a lease and force userspace to drop its page references. I have also tagged these for -stable to purposely break cases that might assume that longterm memory registrations for filesystem-dax mappings were supported by the kernel. The behavior regression this policy change implies is one of the reasons we maintain the "dax enabled. Warning: EXPERIMENTAL, use at your own risk" notification when mounting a filesystem in dax mode. It is worth noting the device-dax interface does not suffer the same constraints since it does not support file space management operations like hole-punch. This patch (of 4): Until there is a solution to the dma-to-dax vs truncate problem it is not safe to allow long standing memory registrations against filesytem-dax vmas. Device-dax vmas do not have this problem and are explicitly allowed. This is temporary until a "memory registration with layout-lease" mechanism can be implemented for the affected sub-systems (RDMA and V4L2). [akpm@linux-foundation.org: use kcalloc()] Link: http://lkml.kernel.org/r/151068939435.7446.13560129395419350737.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30 08:10:35 +08:00
/*
* We can leverage the VM_FAULT_RETRY functionality in the page fault
* paths better by using either get_user_pages_locked() or
* get_user_pages_unlocked().
*
* get_user_pages_locked() is suitable to replace the form:
*
* down_read(&mm->mmap_sem);
* do_something()
* get_user_pages(tsk, mm, ..., pages, NULL);
* up_read(&mm->mmap_sem);
*
* to:
*
* int locked = 1;
* down_read(&mm->mmap_sem);
* do_something()
* get_user_pages_locked(tsk, mm, ..., pages, &locked);
* if (locked)
* up_read(&mm->mmap_sem);
*/
long get_user_pages_locked(unsigned long start, unsigned long nr_pages,
unsigned int gup_flags, struct page **pages,
int *locked)
{
/*
* FIXME: Current FOLL_LONGTERM behavior is incompatible with
* FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on
* vmas. As there are no users of this flag in this call we simply
* disallow this option for now.
*/
if (WARN_ON_ONCE(gup_flags & FOLL_LONGTERM))
return -EINVAL;
return __get_user_pages_locked(current, current->mm, start, nr_pages,
pages, NULL, locked,
gup_flags | FOLL_TOUCH);
}
EXPORT_SYMBOL(get_user_pages_locked);
/*
* get_user_pages_unlocked() is suitable to replace the form:
*
* down_read(&mm->mmap_sem);
* get_user_pages(tsk, mm, ..., pages, NULL);
* up_read(&mm->mmap_sem);
*
* with:
*
* get_user_pages_unlocked(tsk, mm, ..., pages);
*
* It is functionally equivalent to get_user_pages_fast so
* get_user_pages_fast should be used instead if specific gup_flags
* (e.g. FOLL_FORCE) are not required.
*/
long get_user_pages_unlocked(unsigned long start, unsigned long nr_pages,
struct page **pages, unsigned int gup_flags)
{
struct mm_struct *mm = current->mm;
int locked = 1;
long ret;
/*
* FIXME: Current FOLL_LONGTERM behavior is incompatible with
* FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on
* vmas. As there are no users of this flag in this call we simply
* disallow this option for now.
*/
if (WARN_ON_ONCE(gup_flags & FOLL_LONGTERM))
return -EINVAL;
down_read(&mm->mmap_sem);
ret = __get_user_pages_locked(current, mm, start, nr_pages, pages, NULL,
&locked, gup_flags | FOLL_TOUCH);
if (locked)
up_read(&mm->mmap_sem);
return ret;
}
EXPORT_SYMBOL(get_user_pages_unlocked);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/*
* Fast GUP
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
*
* get_user_pages_fast attempts to pin user pages by walking the page
* tables directly and avoids taking locks. Thus the walker needs to be
* protected from page table pages being freed from under it, and should
* block any THP splits.
*
* One way to achieve this is to have the walker disable interrupts, and
* rely on IPIs from the TLB flushing code blocking before the page table
* pages are freed. This is unsuitable for architectures that do not need
* to broadcast an IPI when invalidating TLBs.
*
* Another way to achieve this is to batch up page table containing pages
* belonging to more than one mm_user, then rcu_sched a callback to free those
* pages. Disabling interrupts will allow the fast_gup walker to both block
* the rcu_sched callback, and an IPI that we broadcast for splitting THPs
* (which is a relatively rare event). The code below adopts this strategy.
*
* Before activating this code, please be aware that the following assumptions
* are currently made:
*
* *) Either HAVE_RCU_TABLE_FREE is enabled, and tlb_remove_table() is used to
* free pages containing page tables or TLB flushing requires IPI broadcast.
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
*
* *) ptes can be read atomically by the architecture.
*
* *) access_ok is sufficient to validate userspace address ranges.
*
* The last two assumptions can be relaxed by the addition of helper functions.
*
* This code is based heavily on the PowerPC implementation by Nick Piggin.
*/
#ifdef CONFIG_HAVE_FAST_GUP
#ifdef CONFIG_GUP_GET_PTE_LOW_HIGH
/*
* WARNING: only to be used in the get_user_pages_fast() implementation.
*
* With get_user_pages_fast(), we walk down the pagetables without taking any
* locks. For this we would like to load the pointers atomically, but sometimes
* that is not possible (e.g. without expensive cmpxchg8b on x86_32 PAE). What
* we do have is the guarantee that a PTE will only either go from not present
* to present, or present to not present or both -- it will not switch to a
* completely different present page without a TLB flush in between; something
* that we are blocking by holding interrupts off.
*
* Setting ptes from not present to present goes:
*
* ptep->pte_high = h;
* smp_wmb();
* ptep->pte_low = l;
*
* And present to not present goes:
*
* ptep->pte_low = 0;
* smp_wmb();
* ptep->pte_high = 0;
*
* We must ensure here that the load of pte_low sees 'l' IFF pte_high sees 'h'.
* We load pte_high *after* loading pte_low, which ensures we don't see an older
* value of pte_high. *Then* we recheck pte_low, which ensures that we haven't
* picked up a changed pte high. We might have gotten rubbish values from
* pte_low and pte_high, but we are guaranteed that pte_low will not have the
* present bit set *unless* it is 'l'. Because get_user_pages_fast() only
* operates on present ptes we're safe.
*/
static inline pte_t gup_get_pte(pte_t *ptep)
{
pte_t pte;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
do {
pte.pte_low = ptep->pte_low;
smp_rmb();
pte.pte_high = ptep->pte_high;
smp_rmb();
} while (unlikely(pte.pte_low != ptep->pte_low));
return pte;
}
#else /* CONFIG_GUP_GET_PTE_LOW_HIGH */
/*
* We require that the PTE can be read atomically.
*/
static inline pte_t gup_get_pte(pte_t *ptep)
{
return READ_ONCE(*ptep);
}
#endif /* CONFIG_GUP_GET_PTE_LOW_HIGH */
static void __maybe_unused undo_dev_pagemap(int *nr, int nr_start,
struct page **pages)
{
while ((*nr) - nr_start) {
struct page *page = pages[--(*nr)];
ClearPageReferenced(page);
put_page(page);
}
}
mm: introduce ARCH_HAS_PTE_SPECIAL Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 08:06:08 +08:00
#ifdef CONFIG_ARCH_HAS_PTE_SPECIAL
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
struct dev_pagemap *pgmap = NULL;
int nr_start = *nr, ret = 0;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
pte_t *ptep, *ptem;
ptem = ptep = pte_offset_map(&pmd, addr);
do {
pte_t pte = gup_get_pte(ptep);
struct page *head, *page;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/*
* Similar to the PMD case below, NUMA hinting must take slow
* path using the pte_protnone check.
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
*/
if (pte_protnone(pte))
goto pte_unmap;
if (!pte_access_permitted(pte, flags & FOLL_WRITE))
goto pte_unmap;
if (pte_devmap(pte)) {
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
if (unlikely(flags & FOLL_LONGTERM))
goto pte_unmap;
pgmap = get_dev_pagemap(pte_pfn(pte), pgmap);
if (unlikely(!pgmap)) {
undo_dev_pagemap(nr, nr_start, pages);
goto pte_unmap;
}
} else if (pte_special(pte))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
goto pte_unmap;
VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
page = pte_page(pte);
head = try_get_compound_head(page, 1);
if (!head)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
goto pte_unmap;
if (unlikely(pte_val(pte) != pte_val(*ptep))) {
put_page(head);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
goto pte_unmap;
}
VM_BUG_ON_PAGE(compound_head(page) != head, page);
SetPageReferenced(page);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
pages[*nr] = page;
(*nr)++;
} while (ptep++, addr += PAGE_SIZE, addr != end);
ret = 1;
pte_unmap:
if (pgmap)
put_dev_pagemap(pgmap);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
pte_unmap(ptem);
return ret;
}
#else
/*
* If we can't determine whether or not a pte is special, then fail immediately
* for ptes. Note, we can still pin HugeTLB and THP as these are guaranteed not
* to be special.
*
* For a futex to be placed on a THP tail page, get_futex_key requires a
* __get_user_pages_fast implementation that can pin pages. Thus it's still
* useful to have gup_huge_pmd even if we can't operate on ptes.
*/
static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
return 0;
}
mm: introduce ARCH_HAS_PTE_SPECIAL Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 08:06:08 +08:00
#endif /* CONFIG_ARCH_HAS_PTE_SPECIAL */
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
#if defined(CONFIG_ARCH_HAS_PTE_DEVMAP) && defined(CONFIG_TRANSPARENT_HUGEPAGE)
static int __gup_device_huge(unsigned long pfn, unsigned long addr,
unsigned long end, struct page **pages, int *nr)
{
int nr_start = *nr;
struct dev_pagemap *pgmap = NULL;
do {
struct page *page = pfn_to_page(pfn);
pgmap = get_dev_pagemap(pfn, pgmap);
if (unlikely(!pgmap)) {
undo_dev_pagemap(nr, nr_start, pages);
return 0;
}
SetPageReferenced(page);
pages[*nr] = page;
get_page(page);
(*nr)++;
pfn++;
} while (addr += PAGE_SIZE, addr != end);
if (pgmap)
put_dev_pagemap(pgmap);
return 1;
}
static int __gup_device_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr,
unsigned long end, struct page **pages, int *nr)
{
unsigned long fault_pfn;
int nr_start = *nr;
fault_pfn = pmd_pfn(orig) + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
if (!__gup_device_huge(fault_pfn, addr, end, pages, nr))
return 0;
if (unlikely(pmd_val(orig) != pmd_val(*pmdp))) {
undo_dev_pagemap(nr, nr_start, pages);
return 0;
}
return 1;
}
static int __gup_device_huge_pud(pud_t orig, pud_t *pudp, unsigned long addr,
unsigned long end, struct page **pages, int *nr)
{
unsigned long fault_pfn;
int nr_start = *nr;
fault_pfn = pud_pfn(orig) + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
if (!__gup_device_huge(fault_pfn, addr, end, pages, nr))
return 0;
if (unlikely(pud_val(orig) != pud_val(*pudp))) {
undo_dev_pagemap(nr, nr_start, pages);
return 0;
}
return 1;
}
#else
static int __gup_device_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr,
unsigned long end, struct page **pages, int *nr)
{
BUILD_BUG();
return 0;
}
static int __gup_device_huge_pud(pud_t pud, pud_t *pudp, unsigned long addr,
unsigned long end, struct page **pages, int *nr)
{
BUILD_BUG();
return 0;
}
#endif
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
static int record_subpages(struct page *page, unsigned long addr,
unsigned long end, struct page **pages)
{
int nr;
for (nr = 0; addr != end; addr += PAGE_SIZE)
pages[nr++] = page++;
return nr;
}
static void put_compound_head(struct page *page, int refs)
{
VM_BUG_ON_PAGE(page_ref_count(page) < refs, page);
/*
* Calling put_page() for each ref is unnecessarily slow. Only the last
* ref needs a put_page().
*/
if (refs > 1)
page_ref_sub(page, refs - 1);
put_page(page);
}
#ifdef CONFIG_ARCH_HAS_HUGEPD
static unsigned long hugepte_addr_end(unsigned long addr, unsigned long end,
unsigned long sz)
{
unsigned long __boundary = (addr + sz) & ~(sz-1);
return (__boundary - 1 < end - 1) ? __boundary : end;
}
static int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
unsigned long end, unsigned int flags,
struct page **pages, int *nr)
{
unsigned long pte_end;
struct page *head, *page;
pte_t pte;
int refs;
pte_end = (addr + sz) & ~(sz-1);
if (pte_end < end)
end = pte_end;
pte = READ_ONCE(*ptep);
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
if (!pte_access_permitted(pte, flags & FOLL_WRITE))
return 0;
/* hugepages are never "special" */
VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
head = pte_page(pte);
page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
refs = record_subpages(page, addr, end, pages + *nr);
head = try_get_compound_head(head, refs);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
if (!head)
return 0;
if (unlikely(pte_val(pte) != pte_val(*ptep))) {
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
put_compound_head(head, refs);
return 0;
}
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
*nr += refs;
SetPageReferenced(head);
return 1;
}
static int gup_huge_pd(hugepd_t hugepd, unsigned long addr,
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
unsigned int pdshift, unsigned long end, unsigned int flags,
struct page **pages, int *nr)
{
pte_t *ptep;
unsigned long sz = 1UL << hugepd_shift(hugepd);
unsigned long next;
ptep = hugepte_offset(hugepd, addr, pdshift);
do {
next = hugepte_addr_end(addr, end, sz);
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
if (!gup_hugepte(ptep, sz, addr, end, flags, pages, nr))
return 0;
} while (ptep++, addr = next, addr != end);
return 1;
}
#else
static inline int gup_huge_pd(hugepd_t hugepd, unsigned long addr,
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
unsigned int pdshift, unsigned long end, unsigned int flags,
struct page **pages, int *nr)
{
return 0;
}
#endif /* CONFIG_ARCH_HAS_HUGEPD */
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
static int gup_huge_pmd(pmd_t orig, pmd_t *pmdp, unsigned long addr,
mm/gup: fix a misnamed "write" argument, and a related bug In several routines, the "flags" argument is incorrectly named "write". Change it to "flags". Also, in one place, the misnaming led to an actual bug: "flags & FOLL_WRITE" is required, rather than just "flags". (That problem was flagged by krobot, in v1 of this patch.) Also, change the flags argument from int, to unsigned int. You can see that this was a simple oversight, because the calling code passes "flags" to the fifth argument: gup_pgd_range(): ... if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr, PGDIR_SHIFT, next, flags, pages, nr)) ...which, until this patch, the callees referred to as "write". Also, change two lines to avoid checkpatch line length complaints, and another line to fix another oversight that checkpatch called out: missing "int" on pdshift. Link: http://lkml.kernel.org/r/20191014184639.1512873-3-jhubbard@nvidia.com Fixes: b798bec4741b ("mm/gup: change write parameter to flags in fast walk") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 11:19:53 +08:00
unsigned long end, unsigned int flags,
struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:56 +08:00
struct page *head, *page;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
int refs;
if (!pmd_access_permitted(orig, flags & FOLL_WRITE))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
if (pmd_devmap(orig)) {
if (unlikely(flags & FOLL_LONGTERM))
return 0;
return __gup_device_huge_pmd(orig, pmdp, addr, end, pages, nr);
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
}
mm, gup: ensure real head page is ref-counted when using hugepages When speculatively taking references to a hugepage using page_cache_add_speculative() in gup_huge_pmd(), it is assumed that the page returned by pmd_page() is the head page. Although normally true, this assumption doesn't hold when the hugepage comprises of successive page table entries such as when using contiguous bit on arm64 at PTE or PMD levels. This can be addressed by ensuring that the page passed to page_cache_add_speculative() is the real head or by de-referencing the head page within the function. We take the first approach to keep the usage pattern aligned with page_cache_get_speculative() where users already pass the appropriate page, i.e., the de-referenced head. Apply the same logic to fix gup_huge_[pud|pgd]() as well. [punit.agrawal@arm.com: fix arm64 ltp failure] Link: http://lkml.kernel.org/r/20170619170145.25577-5-punit.agrawal@arm.com Link: http://lkml.kernel.org/r/20170522133604.11392-3-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:39 +08:00
page = pmd_page(orig) + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
refs = record_subpages(page, addr, end, pages + *nr);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
head = try_get_compound_head(pmd_page(orig), refs);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
if (!head)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
if (unlikely(pmd_val(orig) != pmd_val(*pmdp))) {
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
put_compound_head(head, refs);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
}
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
*nr += refs;
SetPageReferenced(head);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 1;
}
static int gup_huge_pud(pud_t orig, pud_t *pudp, unsigned long addr,
unsigned long end, unsigned int flags, struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:56 +08:00
struct page *head, *page;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
int refs;
if (!pud_access_permitted(orig, flags & FOLL_WRITE))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
if (pud_devmap(orig)) {
if (unlikely(flags & FOLL_LONGTERM))
return 0;
return __gup_device_huge_pud(orig, pudp, addr, end, pages, nr);
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
}
mm, gup: ensure real head page is ref-counted when using hugepages When speculatively taking references to a hugepage using page_cache_add_speculative() in gup_huge_pmd(), it is assumed that the page returned by pmd_page() is the head page. Although normally true, this assumption doesn't hold when the hugepage comprises of successive page table entries such as when using contiguous bit on arm64 at PTE or PMD levels. This can be addressed by ensuring that the page passed to page_cache_add_speculative() is the real head or by de-referencing the head page within the function. We take the first approach to keep the usage pattern aligned with page_cache_get_speculative() where users already pass the appropriate page, i.e., the de-referenced head. Apply the same logic to fix gup_huge_[pud|pgd]() as well. [punit.agrawal@arm.com: fix arm64 ltp failure] Link: http://lkml.kernel.org/r/20170619170145.25577-5-punit.agrawal@arm.com Link: http://lkml.kernel.org/r/20170522133604.11392-3-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:39 +08:00
page = pud_page(orig) + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
refs = record_subpages(page, addr, end, pages + *nr);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
head = try_get_compound_head(pud_page(orig), refs);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
if (!head)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
if (unlikely(pud_val(orig) != pud_val(*pudp))) {
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
put_compound_head(head, refs);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
}
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
*nr += refs;
SetPageReferenced(head);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 1;
}
static int gup_huge_pgd(pgd_t orig, pgd_t *pgdp, unsigned long addr,
unsigned long end, unsigned int flags,
struct page **pages, int *nr)
{
int refs;
mm: drop tail page refcounting Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:56 +08:00
struct page *head, *page;
if (!pgd_access_permitted(orig, flags & FOLL_WRITE))
return 0;
BUILD_BUG_ON(pgd_devmap(orig));
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
mm, gup: ensure real head page is ref-counted when using hugepages When speculatively taking references to a hugepage using page_cache_add_speculative() in gup_huge_pmd(), it is assumed that the page returned by pmd_page() is the head page. Although normally true, this assumption doesn't hold when the hugepage comprises of successive page table entries such as when using contiguous bit on arm64 at PTE or PMD levels. This can be addressed by ensuring that the page passed to page_cache_add_speculative() is the real head or by de-referencing the head page within the function. We take the first approach to keep the usage pattern aligned with page_cache_get_speculative() where users already pass the appropriate page, i.e., the de-referenced head. Apply the same logic to fix gup_huge_[pud|pgd]() as well. [punit.agrawal@arm.com: fix arm64 ltp failure] Link: http://lkml.kernel.org/r/20170619170145.25577-5-punit.agrawal@arm.com Link: http://lkml.kernel.org/r/20170522133604.11392-3-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 06:39:39 +08:00
page = pgd_page(orig) + ((addr & ~PGDIR_MASK) >> PAGE_SHIFT);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
refs = record_subpages(page, addr, end, pages + *nr);
head = try_get_compound_head(pgd_page(orig), refs);
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
if (!head)
return 0;
if (unlikely(pgd_val(orig) != pgd_val(*pgdp))) {
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
put_compound_head(head, refs);
return 0;
}
mm/gup: factor out duplicate code from four routines Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 14:12:17 +08:00
*nr += refs;
SetPageReferenced(head);
return 1;
}
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
unsigned long next;
pmd_t *pmdp;
pmdp = pmd_offset(&pud, addr);
do {
pmd_t pmd = READ_ONCE(*pmdp);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
next = pmd_addr_end(addr, end);
mm: thp: check pmd migration entry in common path When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 07:11:01 +08:00
if (!pmd_present(pmd))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
pmd_devmap(pmd))) {
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/*
* NUMA hinting faults need to be handled in the GUP
* slowpath for accounting purposes and so that they
* can be serialised against THP migration.
*/
if (pmd_protnone(pmd))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
if (!gup_huge_pmd(pmd, pmdp, addr, next, flags,
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
pages, nr))
return 0;
} else if (unlikely(is_hugepd(__hugepd(pmd_val(pmd))))) {
/*
* architecture have different format for hugetlbfs
* pmd format and THP pmd format
*/
if (!gup_huge_pd(__hugepd(pmd_val(pmd)), addr,
PMD_SHIFT, next, flags, pages, nr))
return 0;
} else if (!gup_pte_range(pmd, addr, next, flags, pages, nr))
return 0;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
} while (pmdp++, addr = next, addr != end);
return 1;
}
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
unsigned long next;
pud_t *pudp;
pudp = pud_offset(&p4d, addr);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
do {
pud_t pud = READ_ONCE(*pudp);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
next = pud_addr_end(addr, end);
if (unlikely(!pud_present(pud)))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
if (unlikely(pud_huge(pud))) {
if (!gup_huge_pud(pud, pudp, addr, next, flags,
pages, nr))
return 0;
} else if (unlikely(is_hugepd(__hugepd(pud_val(pud))))) {
if (!gup_huge_pd(__hugepd(pud_val(pud)), addr,
PUD_SHIFT, next, flags, pages, nr))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
} else if (!gup_pmd_range(pud, addr, next, flags, pages, nr))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
} while (pudp++, addr = next, addr != end);
return 1;
}
static int gup_p4d_range(pgd_t pgd, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
p4d_t *p4dp;
p4dp = p4d_offset(&pgd, addr);
do {
p4d_t p4d = READ_ONCE(*p4dp);
next = p4d_addr_end(addr, end);
if (p4d_none(p4d))
return 0;
BUILD_BUG_ON(p4d_huge(p4d));
if (unlikely(is_hugepd(__hugepd(p4d_val(p4d))))) {
if (!gup_huge_pd(__hugepd(p4d_val(p4d)), addr,
P4D_SHIFT, next, flags, pages, nr))
return 0;
} else if (!gup_pud_range(p4d, addr, next, flags, pages, nr))
return 0;
} while (p4dp++, addr = next, addr != end);
return 1;
}
static void gup_pgd_range(unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pgd_t *pgdp;
pgdp = pgd_offset(current->mm, addr);
do {
pgd_t pgd = READ_ONCE(*pgdp);
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
return;
if (unlikely(pgd_huge(pgd))) {
if (!gup_huge_pgd(pgd, pgdp, addr, next, flags,
pages, nr))
return;
} else if (unlikely(is_hugepd(__hugepd(pgd_val(pgd))))) {
if (!gup_huge_pd(__hugepd(pgd_val(pgd)), addr,
PGDIR_SHIFT, next, flags, pages, nr))
return;
} else if (!gup_p4d_range(pgd, addr, next, flags, pages, nr))
return;
} while (pgdp++, addr = next, addr != end);
}
#else
static inline void gup_pgd_range(unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
}
#endif /* CONFIG_HAVE_FAST_GUP */
#ifndef gup_fast_permitted
/*
* Check if it's allowed to use __get_user_pages_fast() for the range, or
* we need to fall back to the slow version:
*/
static bool gup_fast_permitted(unsigned long start, unsigned long end)
{
return true;
}
#endif
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/*
* Like get_user_pages_fast() except it's IRQ-safe in that it won't fall back to
* the regular GUP.
* Note a difference with get_user_pages_fast: this always returns the
* number of pages pinned, 0 if no pages were pinned.
*
* If the architecture does not support this function, simply return with no
* pages pinned.
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
*/
int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages)
{
unsigned long len, end;
unsigned long flags;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
int nr = 0;
start = untagged_addr(start) & PAGE_MASK;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
if (end <= start)
return 0;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 10:57:57 +08:00
if (unlikely(!access_ok((void __user *)start, len)))
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return 0;
/*
* Disable interrupts. We use the nested form as we can already have
* interrupts disabled by get_futex_key.
*
* With interrupts disabled, we block page table pages from being
* freed from under us. See struct mmu_table_batch comments in
* include/asm-generic/tlb.h for more details.
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
*
* We do not adopt an rcu_read_lock(.) here as we also want to
* block IPIs that come from THPs splitting.
*/
if (IS_ENABLED(CONFIG_HAVE_FAST_GUP) &&
gup_fast_permitted(start, end)) {
local_irq_save(flags);
gup_pgd_range(start, end, write ? FOLL_WRITE : 0, pages, &nr);
local_irq_restore(flags);
}
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
return nr;
}
EXPORT_SYMBOL_GPL(__get_user_pages_fast);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
static int __gup_longterm_unlocked(unsigned long start, int nr_pages,
unsigned int gup_flags, struct page **pages)
{
int ret;
/*
* FIXME: FOLL_LONGTERM does not work with
* get_user_pages_unlocked() (see comments in that function)
*/
if (gup_flags & FOLL_LONGTERM) {
down_read(&current->mm->mmap_sem);
ret = __gup_longterm_locked(current, current->mm,
start, nr_pages,
pages, NULL, gup_flags);
up_read(&current->mm->mmap_sem);
} else {
ret = get_user_pages_unlocked(start, nr_pages,
pages, gup_flags);
}
return ret;
}
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/**
* get_user_pages_fast() - pin user pages in memory
* @start: starting user address
* @nr_pages: number of pages from start to pin
mm/gup: change GUP fast to use flags rather than a write 'bool' To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:11 +08:00
* @gup_flags: flags modifying pin behaviour
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
* @pages: array that receives pointers to the pages pinned.
* Should be at least nr_pages long.
*
* Attempt to pin user pages in memory without taking mm->mmap_sem.
* If not successful, it will fall back to taking the lock and
* calling get_user_pages().
*
* Returns number of pages pinned. This may be fewer than the number
* requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno.
*/
mm/gup: change GUP fast to use flags rather than a write 'bool' To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:11 +08:00
int get_user_pages_fast(unsigned long start, int nr_pages,
unsigned int gup_flags, struct page **pages)
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
{
unsigned long addr, len, end;
int nr = 0, ret = 0;
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
if (WARN_ON_ONCE(gup_flags & ~(FOLL_WRITE | FOLL_LONGTERM)))
return -EINVAL;
start = untagged_addr(start) & PAGE_MASK;
addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
if (end <= start)
get_user_pages_fast(): return -EFAULT on access_ok failure get_user_pages_fast is supposed to be a faster drop-in equivalent of get_user_pages. As such, callers expect it to return a negative return code when passed an invalid address, and never expect it to return 0 when passed a positive number of pages, since its documentation says: * Returns number of pages pinned. This may be fewer than the number * requested. If nr_pages is 0 or negative, returns 0. If no pages * were pinned, returns -errno. When get_user_pages_fast fall back on get_user_pages this is exactly what happens. Unfortunately the implementation is inconsistent: it returns 0 if passed a kernel address, confusing callers: for example, the following is pretty common but does not appear to do the right thing with a kernel address: ret = get_user_pages_fast(addr, 1, writeable, &page); if (ret < 0) return ret; Change get_user_pages_fast to return -EFAULT when supplied a kernel address to make it match expectations. All callers have been audited for consistency with the documented semantics. Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com Fixes: 5b65c4677a57 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-14 06:35:20 +08:00
return 0;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 10:57:57 +08:00
if (unlikely(!access_ok((void __user *)start, len)))
get_user_pages_fast(): return -EFAULT on access_ok failure get_user_pages_fast is supposed to be a faster drop-in equivalent of get_user_pages. As such, callers expect it to return a negative return code when passed an invalid address, and never expect it to return 0 when passed a positive number of pages, since its documentation says: * Returns number of pages pinned. This may be fewer than the number * requested. If nr_pages is 0 or negative, returns 0. If no pages * were pinned, returns -errno. When get_user_pages_fast fall back on get_user_pages this is exactly what happens. Unfortunately the implementation is inconsistent: it returns 0 if passed a kernel address, confusing callers: for example, the following is pretty common but does not appear to do the right thing with a kernel address: ret = get_user_pages_fast(addr, 1, writeable, &page); if (ret < 0) return ret; Change get_user_pages_fast to return -EFAULT when supplied a kernel address to make it match expectations. All callers have been audited for consistency with the documented semantics. Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com Fixes: 5b65c4677a57 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-14 06:35:20 +08:00
return -EFAULT;
if (IS_ENABLED(CONFIG_HAVE_FAST_GUP) &&
gup_fast_permitted(start, end)) {
local_irq_disable();
mm/gup: change GUP fast to use flags rather than a write 'bool' To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:11 +08:00
gup_pgd_range(addr, end, gup_flags, pages, &nr);
local_irq_enable();
ret = nr;
}
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
if (nr < nr_pages) {
/* Try to get the remaining pages with get_user_pages */
start += nr << PAGE_SHIFT;
pages += nr;
mm/gup: add FOLL_LONGTERM capability to GUP fast DAX pages were previously unprotected from longterm pins when users called get_user_pages_fast(). Use the new FOLL_LONGTERM flag to check for DEVMAP pages and fall back to regular GUP processing if a DEVMAP page is encountered. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-5-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-5-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 08:17:14 +08:00
ret = __gup_longterm_unlocked(start, nr_pages - nr,
gup_flags, pages);
mm: introduce a general RCU get_user_pages_fast() This series implements general forms of get_user_pages_fast and __get_user_pages_fast in core code and activates them for arm and arm64. These are required for Transparent HugePages to function correctly, as a futex on a THP tail will otherwise result in an infinite loop (due to the core implementation of __get_user_pages_fast always returning 0). Unfortunately, a futex on THP tail can be quite common for certain workloads; thus THP is unreliable without a __get_user_pages_fast implementation. This series may also be beneficial for direct-IO heavy workloads and certain KVM workloads. This patch (of 6): get_user_pages_fast() attempts to pin user pages by walking the page tables directly and avoids taking locks. Thus the walker needs to be protected from page table pages being freed from under it, and needs to block any THP splits. One way to achieve this is to have the walker disable interrupts, and rely on IPIs from the TLB flushing code blocking before the page table pages are freed. On some platforms we have hardware broadcast of TLB invalidations, thus the TLB flushing code doesn't necessarily need to broadcast IPIs; and spuriously broadcasting IPIs can hurt system performance if done too often. This problem has been solved on PowerPC and Sparc by batching up page table pages belonging to more than one mm_user, then scheduling an rcu_sched callback to free the pages. This RCU page table free logic has been promoted to core code and is activated when one enables HAVE_RCU_TABLE_FREE. Unfortunately, these architectures implement their own get_user_pages_fast routines. The RCU page table free logic coupled with an IPI broadcast on THP split (which is a rare event), allows one to protect a page table walker by merely disabling the interrupts during the walk. This patch provides a general RCU implementation of get_user_pages_fast that can be used by architectures that perform hardware broadcast of TLB invalidations. It is based heavily on the PowerPC implementation by Nick Piggin. [akpm@linux-foundation.org: various comment fixes] Signed-off-by: Steve Capper <steve.capper@linaro.org> Tested-by: Dann Frazier <dann.frazier@canonical.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 06:29:14 +08:00
/* Have to be a bit careful with return values */
if (nr > 0) {
if (ret < 0)
ret = nr;
else
ret += nr;
}
}
return ret;
}
EXPORT_SYMBOL_GPL(get_user_pages_fast);