OpenCloudOS-Kernel/drivers/media/tuners/tda8290.c

888 lines
24 KiB
C
Raw Normal View History

/*
i2c tv tuner chip device driver
controls the philips tda8290+75 tuner chip combo.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
This "tda8290" module was split apart from the original "tuner" module.
*/
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include "tuner-i2c.h"
#include "tda8290.h"
#include "tda827x.h"
#include "tda18271.h"
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable verbose debug messages");
static int deemphasis_50;
module_param(deemphasis_50, int, 0644);
MODULE_PARM_DESC(deemphasis_50, "0 - 75us deemphasis; 1 - 50us deemphasis");
/* ---------------------------------------------------------------------- */
struct tda8290_priv {
struct tuner_i2c_props i2c_props;
unsigned char tda8290_easy_mode;
unsigned char tda827x_addr;
unsigned char ver;
#define TDA8290 1
#define TDA8295 2
#define TDA8275 4
#define TDA8275A 8
#define TDA18271 16
struct tda827x_config cfg;
struct tda18271_std_map *tda18271_std_map;
};
/*---------------------------------------------------------------------*/
static int tda8290_i2c_bridge(struct dvb_frontend *fe, int close)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char enable[2] = { 0x21, 0xC0 };
unsigned char disable[2] = { 0x21, 0x00 };
unsigned char *msg;
if (close) {
msg = enable;
tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
/* let the bridge stabilize */
msleep(20);
} else {
msg = disable;
tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
}
return 0;
}
static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char enable[2] = { 0x45, 0xc1 };
unsigned char disable[2] = { 0x46, 0x00 };
unsigned char buf[3] = { 0x45, 0x01, 0x00 };
unsigned char *msg;
if (close) {
msg = enable;
tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
/* let the bridge stabilize */
msleep(20);
} else {
msg = disable;
tuner_i2c_xfer_send_recv(&priv->i2c_props, msg, 1, &msg[1], 1);
buf[2] = msg[1];
buf[2] &= ~0x04;
tuner_i2c_xfer_send(&priv->i2c_props, buf, 3);
msleep(5);
msg[1] |= 0x04;
tuner_i2c_xfer_send(&priv->i2c_props, msg, 2);
}
return 0;
}
/*---------------------------------------------------------------------*/
static void set_audio(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
char* mode;
if (params->std & V4L2_STD_MN) {
priv->tda8290_easy_mode = 0x01;
mode = "MN";
} else if (params->std & V4L2_STD_B) {
priv->tda8290_easy_mode = 0x02;
mode = "B";
} else if (params->std & V4L2_STD_GH) {
priv->tda8290_easy_mode = 0x04;
mode = "GH";
} else if (params->std & V4L2_STD_PAL_I) {
priv->tda8290_easy_mode = 0x08;
mode = "I";
} else if (params->std & V4L2_STD_DK) {
priv->tda8290_easy_mode = 0x10;
mode = "DK";
} else if (params->std & V4L2_STD_SECAM_L) {
priv->tda8290_easy_mode = 0x20;
mode = "L";
} else if (params->std & V4L2_STD_SECAM_LC) {
priv->tda8290_easy_mode = 0x40;
mode = "LC";
} else {
priv->tda8290_easy_mode = 0x10;
mode = "xx";
}
if (params->mode == V4L2_TUNER_RADIO) {
/* Set TDA8295 to FM radio; Start TDA8290 with MN values */
priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
tuner_dbg("setting to radio FM\n");
} else {
tuner_dbg("setting tda829x to system %s\n", mode);
}
}
static struct {
unsigned char seq[2];
} fm_mode[] = {
{ { 0x01, 0x81} }, /* Put device into expert mode */
{ { 0x03, 0x48} }, /* Disable NOTCH and VIDEO filters */
{ { 0x04, 0x04} }, /* Disable color carrier filter (SSIF) */
{ { 0x05, 0x04} }, /* ADC headroom */
{ { 0x06, 0x10} }, /* group delay flat */
{ { 0x07, 0x00} }, /* use the same radio DTO values as a tda8295 */
{ { 0x08, 0x00} },
{ { 0x09, 0x80} },
{ { 0x0a, 0xda} },
{ { 0x0b, 0x4b} },
{ { 0x0c, 0x68} },
{ { 0x0d, 0x00} }, /* PLL off, no video carrier detect */
{ { 0x14, 0x00} }, /* disable auto mute if no video */
};
static void tda8290_set_params(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode[] = { 0x01, priv->tda8290_easy_mode };
unsigned char expert_mode[] = { 0x01, 0x80 };
unsigned char agc_out_on[] = { 0x02, 0x00 };
unsigned char gainset_off[] = { 0x28, 0x14 };
unsigned char if_agc_spd[] = { 0x0f, 0x88 };
unsigned char adc_head_6[] = { 0x05, 0x04 };
unsigned char adc_head_9[] = { 0x05, 0x02 };
unsigned char adc_head_12[] = { 0x05, 0x01 };
unsigned char pll_bw_nom[] = { 0x0d, 0x47 };
unsigned char pll_bw_low[] = { 0x0d, 0x27 };
unsigned char gainset_2[] = { 0x28, 0x64 };
unsigned char agc_rst_on[] = { 0x0e, 0x0b };
unsigned char agc_rst_off[] = { 0x0e, 0x09 };
unsigned char if_agc_set[] = { 0x0f, 0x81 };
unsigned char addr_adc_sat = 0x1a;
unsigned char addr_agc_stat = 0x1d;
unsigned char addr_pll_stat = 0x1b;
unsigned char adc_sat, agc_stat,
pll_stat;
int i;
set_audio(fe, params);
if (priv->cfg.config)
tuner_dbg("tda827xa config is 0x%02x\n", priv->cfg.config);
tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2);
tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2);
tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2);
msleep(1);
if (params->mode == V4L2_TUNER_RADIO) {
unsigned char deemphasis[] = { 0x13, 1 };
/* FIXME: allow using a different deemphasis */
if (deemphasis_50)
deemphasis[1] = 2;
for (i = 0; i < ARRAY_SIZE(fm_mode); i++)
tuner_i2c_xfer_send(&priv->i2c_props, fm_mode[i].seq, 2);
tuner_i2c_xfer_send(&priv->i2c_props, deemphasis, 2);
} else {
expert_mode[1] = priv->tda8290_easy_mode + 0x80;
tuner_i2c_xfer_send(&priv->i2c_props, expert_mode, 2);
tuner_i2c_xfer_send(&priv->i2c_props, gainset_off, 2);
tuner_i2c_xfer_send(&priv->i2c_props, if_agc_spd, 2);
if (priv->tda8290_easy_mode & 0x60)
tuner_i2c_xfer_send(&priv->i2c_props, adc_head_9, 2);
else
tuner_i2c_xfer_send(&priv->i2c_props, adc_head_6, 2);
tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2);
}
[media] saa7134: Kworld SBTVD: make both analog and digital to work There are some weird bugs at tda8290/tda18271 initialization, as it insits do do analog initialization during DVB frontend attach: DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... mb86a20s: mb86a20s_initfe tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271_init: [2-0060|M] error -5 on line 830 tda18271_tune: [2-0060|M] error -5 on line 908 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 tda18271_channel_configuration: [2-0060|M] error -5 on line 119 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33) mb86a20s: Init failed. Will try again later The problem is that mb86a20s is only visible if the analog part is disabled. However, due to a trick at mb86a20s, it will later initialize properly: mb86a20s: mb86a20s_initfe: Initialization succeded. This is hacky and ugly. However, I coldn't find any easy way to fix it. A proper fix would be to have a resource locking schema, used by both V4L and DVB parts that would block access to analog registers while digital registers are in use, but this will probably put tda829x into a dead lock. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-14 23:03:03 +08:00
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_analog_params)
fe->ops.tuner_ops.set_analog_params(fe, params);
for (i = 0; i < 3; i++) {
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_pll_stat, 1, &pll_stat, 1);
if (pll_stat & 0x80) {
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_adc_sat, 1,
&adc_sat, 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_agc_stat, 1,
&agc_stat, 1);
tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat);
break;
} else {
tuner_dbg("tda8290 not locked, no signal?\n");
msleep(100);
}
}
/* adjust headroom resp. gain */
if ((agc_stat > 115) || (!(pll_stat & 0x80) && (adc_sat < 20))) {
tuner_dbg("adjust gain, step 1. Agc: %d, ADC stat: %d, lock: %d\n",
agc_stat, adc_sat, pll_stat & 0x80);
tuner_i2c_xfer_send(&priv->i2c_props, gainset_2, 2);
msleep(100);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_agc_stat, 1, &agc_stat, 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_pll_stat, 1, &pll_stat, 1);
if ((agc_stat > 115) || !(pll_stat & 0x80)) {
tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n",
agc_stat, pll_stat & 0x80);
if (priv->cfg.agcf)
priv->cfg.agcf(fe);
msleep(100);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_agc_stat, 1,
&agc_stat, 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_pll_stat, 1,
&pll_stat, 1);
if((agc_stat > 115) || !(pll_stat & 0x80)) {
tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat);
tuner_i2c_xfer_send(&priv->i2c_props, adc_head_12, 2);
tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_low, 2);
msleep(100);
}
}
}
/* l/ l' deadlock? */
if(priv->tda8290_easy_mode & 0x60) {
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_adc_sat, 1,
&adc_sat, 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&addr_pll_stat, 1,
&pll_stat, 1);
if ((adc_sat > 20) || !(pll_stat & 0x80)) {
tuner_dbg("trying to resolve SECAM L deadlock\n");
tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_on, 2);
msleep(40);
tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_off, 2);
}
}
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
tuner_i2c_xfer_send(&priv->i2c_props, if_agc_set, 2);
}
/*---------------------------------------------------------------------*/
static void tda8295_power(struct dvb_frontend *fe, int enable)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char buf[] = { 0x30, 0x00 }; /* clb_stdbt */
tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
if (enable)
buf[1] = 0x01;
else
buf[1] = 0x03;
tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
}
static void tda8295_set_easy_mode(struct dvb_frontend *fe, int enable)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char buf[] = { 0x01, 0x00 };
tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
if (enable)
buf[1] = 0x01; /* rising edge sets regs 0x02 - 0x23 */
else
buf[1] = 0x00; /* reset active bit */
tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
}
static void tda8295_set_video_std(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char buf[] = { 0x00, priv->tda8290_easy_mode };
tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
tda8295_set_easy_mode(fe, 1);
msleep(20);
tda8295_set_easy_mode(fe, 0);
}
/*---------------------------------------------------------------------*/
static void tda8295_agc1_out(struct dvb_frontend *fe, int enable)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char buf[] = { 0x02, 0x00 }; /* DIV_FUNC */
tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1);
if (enable)
buf[1] &= ~0x40;
else
buf[1] |= 0x40;
tuner_i2c_xfer_send(&priv->i2c_props, buf, 2);
}
static void tda8295_agc2_out(struct dvb_frontend *fe, int enable)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char set_gpio_cf[] = { 0x44, 0x00 };
unsigned char set_gpio_val[] = { 0x46, 0x00 };
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&set_gpio_cf[0], 1, &set_gpio_cf[1], 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&set_gpio_val[0], 1, &set_gpio_val[1], 1);
set_gpio_cf[1] &= 0xf0; /* clear GPIO_0 bits 3-0 */
if (enable) {
set_gpio_cf[1] |= 0x01; /* config GPIO_0 as Open Drain Out */
set_gpio_val[1] &= 0xfe; /* set GPIO_0 pin low */
}
tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_cf, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_val, 2);
}
static int tda8295_has_signal(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char hvpll_stat = 0x26;
unsigned char ret;
tuner_i2c_xfer_send_recv(&priv->i2c_props, &hvpll_stat, 1, &ret, 1);
return (ret & 0x01) ? 65535 : 0;
}
/*---------------------------------------------------------------------*/
static void tda8295_set_params(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char blanking_mode[] = { 0x1d, 0x00 };
set_audio(fe, params);
tuner_dbg("%s: freq = %d\n", __func__, params->frequency);
tda8295_power(fe, 1);
tda8295_agc1_out(fe, 1);
tuner_i2c_xfer_send_recv(&priv->i2c_props,
&blanking_mode[0], 1, &blanking_mode[1], 1);
tda8295_set_video_std(fe);
blanking_mode[1] = 0x03;
tuner_i2c_xfer_send(&priv->i2c_props, blanking_mode, 2);
msleep(20);
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_analog_params)
fe->ops.tuner_ops.set_analog_params(fe, params);
if (priv->cfg.agcf)
priv->cfg.agcf(fe);
if (tda8295_has_signal(fe))
tuner_dbg("tda8295 is locked\n");
else
tuner_dbg("tda8295 not locked, no signal?\n");
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
}
/*---------------------------------------------------------------------*/
static int tda8290_has_signal(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char i2c_get_afc[1] = { 0x1B };
unsigned char afc = 0;
tuner_i2c_xfer_send_recv(&priv->i2c_props,
i2c_get_afc, ARRAY_SIZE(i2c_get_afc), &afc, 1);
return (afc & 0x80)? 65535:0;
}
/*---------------------------------------------------------------------*/
static void tda8290_standby(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char cb1[] = { 0x30, 0xD0 };
unsigned char tda8290_standby[] = { 0x00, 0x02 };
unsigned char tda8290_agc_tri[] = { 0x02, 0x20 };
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0, .buf=cb1, .len = 2};
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
if (priv->ver & TDA8275A)
cb1[1] = 0x90;
i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
tuner_i2c_xfer_send(&priv->i2c_props, tda8290_agc_tri, 2);
tuner_i2c_xfer_send(&priv->i2c_props, tda8290_standby, 2);
}
static void tda8295_standby(struct dvb_frontend *fe)
{
tda8295_agc1_out(fe, 0); /* Put AGC in tri-state */
tda8295_power(fe, 0);
}
static void tda8290_init_if(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char set_VS[] = { 0x30, 0x6F };
unsigned char set_GP00_CF[] = { 0x20, 0x01 };
unsigned char set_GP01_CF[] = { 0x20, 0x0B };
if ((priv->cfg.config == 1) || (priv->cfg.config == 2))
tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2);
else
tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_VS, 2);
}
static void tda8295_init_if(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
static unsigned char set_adc_ctl[] = { 0x33, 0x14 };
static unsigned char set_adc_ctl2[] = { 0x34, 0x00 };
static unsigned char set_pll_reg6[] = { 0x3e, 0x63 };
static unsigned char set_pll_reg0[] = { 0x38, 0x23 };
static unsigned char set_pll_reg7[] = { 0x3f, 0x01 };
static unsigned char set_pll_reg10[] = { 0x42, 0x61 };
static unsigned char set_gpio_reg0[] = { 0x44, 0x0b };
tda8295_power(fe, 1);
tda8295_set_easy_mode(fe, 0);
tda8295_set_video_std(fe);
tuner_i2c_xfer_send(&priv->i2c_props, set_adc_ctl, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_adc_ctl2, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg6, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg0, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg7, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_pll_reg10, 2);
tuner_i2c_xfer_send(&priv->i2c_props, set_gpio_reg0, 2);
tda8295_agc1_out(fe, 0);
tda8295_agc2_out(fe, 0);
}
static void tda8290_init_tuner(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
unsigned char tda8275_init[] = { 0x00, 0x00, 0x00, 0x40, 0xdC, 0x04, 0xAf,
0x3F, 0x2A, 0x04, 0xFF, 0x00, 0x00, 0x40 };
unsigned char tda8275a_init[] = { 0x00, 0x00, 0x00, 0x00, 0xdC, 0x05, 0x8b,
0x0c, 0x04, 0x20, 0xFF, 0x00, 0x00, 0x4b };
struct i2c_msg msg = {.addr = priv->tda827x_addr, .flags=0,
.buf=tda8275_init, .len = 14};
if (priv->ver & TDA8275A)
msg.buf = tda8275a_init;
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
}
/*---------------------------------------------------------------------*/
static void tda829x_release(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
/* only try to release the tuner if we've
* attached it from within this module */
if (priv->ver & (TDA18271 | TDA8275 | TDA8275A))
if (fe->ops.tuner_ops.release)
fe->ops.tuner_ops.release(fe);
kfree(fe->analog_demod_priv);
fe->analog_demod_priv = NULL;
}
static struct tda18271_config tda829x_tda18271_config = {
.gate = TDA18271_GATE_ANALOG,
};
static int tda829x_find_tuner(struct dvb_frontend *fe)
{
struct tda8290_priv *priv = fe->analog_demod_priv;
int i, ret, tuners_found;
u32 tuner_addrs;
u8 data;
struct i2c_msg msg = { .flags = I2C_M_RD, .buf = &data, .len = 1 };
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
/* probe for tuner chip */
tuners_found = 0;
tuner_addrs = 0;
for (i = 0x60; i <= 0x63; i++) {
msg.addr = i;
ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (ret == 1) {
tuners_found++;
tuner_addrs = (tuner_addrs << 8) + i;
}
}
/* if there is more than one tuner, we expect the right one is
behind the bridge and we choose the highest address that doesn't
give a response now
*/
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
if (tuners_found > 1)
for (i = 0; i < tuners_found; i++) {
msg.addr = tuner_addrs & 0xff;
ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (ret == 1)
tuner_addrs = tuner_addrs >> 8;
else
break;
}
if (tuner_addrs == 0) {
tuner_addrs = 0x60;
tuner_info("could not clearly identify tuner address, "
"defaulting to %x\n", tuner_addrs);
} else {
tuner_addrs = tuner_addrs & 0xff;
tuner_info("setting tuner address to %x\n", tuner_addrs);
}
priv->tda827x_addr = tuner_addrs;
msg.addr = tuner_addrs;
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 1);
ret = i2c_transfer(priv->i2c_props.adap, &msg, 1);
if (ret != 1) {
tuner_warn("tuner access failed!\n");
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
return -EREMOTEIO;
}
if ((data == 0x83) || (data == 0x84)) {
priv->ver |= TDA18271;
tda829x_tda18271_config.config = priv->cfg.config;
tda829x_tda18271_config.std_map = priv->tda18271_std_map;
dvb_attach(tda18271_attach, fe, priv->tda827x_addr,
priv->i2c_props.adap, &tda829x_tda18271_config);
} else {
if ((data & 0x3c) == 0)
priv->ver |= TDA8275;
else
priv->ver |= TDA8275A;
dvb_attach(tda827x_attach, fe, priv->tda827x_addr,
priv->i2c_props.adap, &priv->cfg);
priv->cfg.switch_addr = priv->i2c_props.addr;
}
if (fe->ops.tuner_ops.init)
fe->ops.tuner_ops.init(fe);
if (fe->ops.tuner_ops.sleep)
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.analog_ops.i2c_gate_ctrl)
fe->ops.analog_ops.i2c_gate_ctrl(fe, 0);
return 0;
}
static int tda8290_probe(struct tuner_i2c_props *i2c_props)
{
#define TDA8290_ID 0x89
u8 reg = 0x1f, id;
struct i2c_msg msg_read[] = {
{ .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = &reg },
{ .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
/* detect tda8290 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}
if (id == TDA8290_ID) {
if (debug)
printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n",
__func__, i2c_adapter_id(i2c_props->adap),
i2c_props->addr);
return 0;
}
return -ENODEV;
}
static int tda8295_probe(struct tuner_i2c_props *i2c_props)
{
#define TDA8295_ID 0x8a
#define TDA8295C2_ID 0x8b
u8 reg = 0x2f, id;
struct i2c_msg msg_read[] = {
{ .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = &reg },
{ .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
/* detect tda8295 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}
if ((id & 0xfe) == TDA8295_ID) {
if (debug)
printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
__func__, (id == TDA8295_ID) ?
"tda8295c1" : "tda8295c2",
i2c_adapter_id(i2c_props->adap),
i2c_props->addr);
return 0;
}
return -ENODEV;
}
static struct analog_demod_ops tda8290_ops = {
.set_params = tda8290_set_params,
.has_signal = tda8290_has_signal,
.standby = tda8290_standby,
.release = tda829x_release,
.i2c_gate_ctrl = tda8290_i2c_bridge,
};
static struct analog_demod_ops tda8295_ops = {
.set_params = tda8295_set_params,
.has_signal = tda8295_has_signal,
.standby = tda8295_standby,
.release = tda829x_release,
.i2c_gate_ctrl = tda8295_i2c_bridge,
};
struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c_adap, u8 i2c_addr,
struct tda829x_config *cfg)
{
struct tda8290_priv *priv = NULL;
char *name;
priv = kzalloc(sizeof(struct tda8290_priv), GFP_KERNEL);
if (priv == NULL)
return NULL;
fe->analog_demod_priv = priv;
priv->i2c_props.addr = i2c_addr;
priv->i2c_props.adap = i2c_adap;
priv->i2c_props.name = "tda829x";
if (cfg) {
priv->cfg.config = cfg->lna_cfg;
priv->tda18271_std_map = cfg->tda18271_std_map;
}
if (tda8290_probe(&priv->i2c_props) == 0) {
priv->ver = TDA8290;
memcpy(&fe->ops.analog_ops, &tda8290_ops,
sizeof(struct analog_demod_ops));
}
if (tda8295_probe(&priv->i2c_props) == 0) {
priv->ver = TDA8295;
memcpy(&fe->ops.analog_ops, &tda8295_ops,
sizeof(struct analog_demod_ops));
}
if (cfg && cfg->no_i2c_gate)
fe->ops.analog_ops.i2c_gate_ctrl = NULL;
if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) {
tda8295_power(fe, 1);
if (tda829x_find_tuner(fe) < 0)
goto fail;
[media] tda8290: Fix a bug if no tuner is detected If tda8290 is detected, but no tuner is found, the driver will do bad things: tuner 2-0060: chip found @ 0xc0 (saa7133[0]) tda829x 2-0060: could not clearly identify tuner address, defaulting to 60 tda829x 2-0060: tuner access failed! BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] PGD 1187b0067 PUD 11771e067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/module/i2c_core/initstate CPU 0 Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau ttm drm_kms_helper drm i2c_algo_bit video output i2c_core ext3 jbd mbcache firewire_ohci firewire_core crc_itu_t sr_mod cdrom sd_mod crc_t10dif ahci dm_mod [last unloaded: microcode] Pid: 9497, comm: modprobe Not tainted 2.6.32-72.el6.x86_64 #1 HP Z400 Workstation RIP: 0010:[<ffffffffa048c267>] [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] RSP: 0018:ffff88010ba01b28 EFLAGS: 00010206 RAX: 00000000000000ff RBX: ffff880119522800 RCX: 0000000000000002 RDX: 0000000000003be0 RSI: ffff88010ba01bb8 RDI: 0000000000000000 RBP: ffff88010ba01b28 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88010ba01bb8 R14: 0000000000001900 R15: 0000000000001900 FS: 00007f4b96b3d700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000011866c000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 9497, threadinfo ffff88010ba00000, task ffff880100708a70) Stack: ffff88010ba01b98 ffffffffa048c95b ffff88010ba01b78 0000000000000060 <0> 0000000000000000 0000000e00000000 000000000000001d ffffffffa03ec838 <0> ffff88010abac240 ffff880119522800 ffff880119522800 ffff880119522bc0 Call Trace: [<ffffffffa048c95b>] tda8295_set_params+0x3b/0x210 [tda8290] [<ffffffffa03ec838>] ? v4l2_i2c_new_subdev_cfg+0x88/0xc0 [v4l2_common] [<ffffffffa0484418>] set_freq+0x128/0x2f0 [tuner] [<ffffffffa0486464>] tuner_s_std+0xc4/0x740 [tuner] [<ffffffffa04b9ae6>] saa7134_set_tvnorm_hw+0x2d6/0x3d0 [saa7134] [<ffffffffa04ba455>] set_tvnorm+0xd5/0x100 [saa7134] [<ffffffffa04bc9fd>] saa7134_video_init2+0x1d/0x50 [saa7134] [<ffffffffa04bf57e>] saa7134_initdev+0x6e1/0xb1d [saa7134] [<ffffffff8125afea>] ? kobject_get+0x1a/0x30 [<ffffffff812765f7>] local_pci_probe+0x17/0x20 [<ffffffff812777e1>] pci_device_probe+0x101/0x120 [<ffffffff8132ec72>] ? driver_sysfs_add+0x62/0x90 [<ffffffff8132ee10>] driver_probe_device+0xa0/0x2a0 [<ffffffff8132f0bb>] __driver_attach+0xab/0xb0 [<ffffffff8132f010>] ? __driver_attach+0x0/0xb0 [<ffffffff8132e074>] bus_for_each_dev+0x64/0x90 [<ffffffff8132ebae>] driver_attach+0x1e/0x20 [<ffffffff8132e4b0>] bus_add_driver+0x200/0x300 [<ffffffff8132f3e6>] driver_register+0x76/0x140 [<ffffffff814c7c43>] ? printk+0x41/0x46 [<ffffffff81277a46>] __pci_register_driver+0x56/0xd0 [<ffffffffa04de000>] ? saa7134_init+0x0/0x4f [saa7134] [<ffffffffa04de04d>] saa7134_init+0x4d/0x4f [saa7134] [<ffffffff8100a04c>] do_one_initcall+0x3c/0x1d0 [<ffffffff810af5ef>] sys_init_module+0xdf/0x250 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b Code: 20 01 49 c7 c0 c9 ec 48 a0 83 7e 04 01 74 2d 8b 0d 3f 2f 00 00 85 c9 0f 85 d7 00 00 00 c9 c3 0f 1f 44 00 00 a9 03 00 01 00 74 61 <c6> 47 20 02 83 7e 04 01 49 c7 c0 cc ec 48 a0 75 d3 0f b6 47 22 RIP [<ffffffffa048c267>] set_audio+0x47/0x170 [tda8290] RSP <ffff88010ba01b28> CR2: 0000000000000020 This happens because some I2C callbacks actually depend on having the driver entirely initialized. To avoid this OOPS, just clean the I2C callbacks, as if no device were detected. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-13 23:02:00 +08:00
}
switch (priv->ver) {
case TDA8290:
name = "tda8290";
break;
case TDA8295:
name = "tda8295";
break;
case TDA8290 | TDA8275:
name = "tda8290+75";
break;
case TDA8295 | TDA8275:
name = "tda8295+75";
break;
case TDA8290 | TDA8275A:
name = "tda8290+75a";
break;
case TDA8295 | TDA8275A:
name = "tda8295+75a";
break;
case TDA8290 | TDA18271:
name = "tda8290+18271";
break;
case TDA8295 | TDA18271:
name = "tda8295+18271";
break;
default:
goto fail;
}
tuner_info("type set to %s\n", name);
fe->ops.analog_ops.info.name = name;
if (priv->ver & TDA8290) {
if (priv->ver & (TDA8275 | TDA8275A))
tda8290_init_tuner(fe);
tda8290_init_if(fe);
} else if (priv->ver & TDA8295)
tda8295_init_if(fe);
return fe;
fail:
memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops));
tda829x_release(fe);
return NULL;
}
EXPORT_SYMBOL_GPL(tda829x_attach);
int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr)
{
struct tuner_i2c_props i2c_props = {
.adap = i2c_adap,
.addr = i2c_addr,
};
unsigned char soft_reset[] = { 0x00, 0x00 };
unsigned char easy_mode_b[] = { 0x01, 0x02 };
unsigned char easy_mode_g[] = { 0x01, 0x04 };
unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
#define PROBE_BUFFER_SIZE 8
unsigned char buf[PROBE_BUFFER_SIZE];
int i;
/* rule out tda9887, which would return the same byte repeatedly */
tuner_i2c_xfer_send_recv(&i2c_props,
soft_reset, 1, buf, PROBE_BUFFER_SIZE);
for (i = 1; i < PROBE_BUFFER_SIZE; i++) {
if (buf[i] != buf[0])
break;
}
/* all bytes are equal, not a tda829x - probably a tda9887 */
if (i == PROBE_BUFFER_SIZE)
return -ENODEV;
if ((tda8290_probe(&i2c_props) == 0) ||
(tda8295_probe(&i2c_props) == 0))
return 0;
/* fall back to old probing method */
tuner_i2c_xfer_send(&i2c_props, easy_mode_b, 2);
tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
tuner_i2c_xfer_send_recv(&i2c_props, &addr_dto_lsb, 1, &data, 1);
if (data == 0) {
tuner_i2c_xfer_send(&i2c_props, easy_mode_g, 2);
tuner_i2c_xfer_send(&i2c_props, soft_reset, 2);
tuner_i2c_xfer_send_recv(&i2c_props,
&addr_dto_lsb, 1, &data, 1);
if (data == 0x7b) {
return 0;
}
}
tuner_i2c_xfer_send(&i2c_props, restore_9886, 3);
return -ENODEV;
}
EXPORT_SYMBOL_GPL(tda829x_probe);
MODULE_DESCRIPTION("Philips/NXP TDA8290/TDA8295 analog IF demodulator driver");
MODULE_AUTHOR("Gerd Knorr, Hartmut Hackmann, Michael Krufky");
MODULE_LICENSE("GPL");
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/