UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/soc/meson/axg-frddr.c

368 lines
13 KiB
C
Raw Normal View History

ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright (c) 2018 BayLibre, SAS.
// Author: Jerome Brunet <jbrunet@baylibre.com>
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
/*
* This driver implements the frontend playback DAI of AXG and G12A based SoCs
*/
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include "axg-fifo.h"
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
#define CTRL0_FRDDR_PP_MODE BIT(30)
#define CTRL0_SEL1_EN_SHIFT 3
#define CTRL0_SEL2_SHIFT 4
#define CTRL0_SEL2_EN_SHIFT 7
#define CTRL0_SEL3_SHIFT 8
#define CTRL0_SEL3_EN_SHIFT 11
#define CTRL1_FRDDR_FORCE_FINISH BIT(12)
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:18 +08:00
#define CTRL2_SEL1_SHIFT 0
#define CTRL2_SEL1_EN_SHIFT 4
#define CTRL2_SEL2_SHIFT 8
#define CTRL2_SEL2_EN_SHIFT 12
#define CTRL2_SEL3_SHIFT 16
#define CTRL2_SEL3_EN_SHIFT 20
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
static int g12a_frddr_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
/* Reset the read pointer to the FIFO_INIT_ADDR */
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, 0);
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, CTRL1_FRDDR_FORCE_FINISH);
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, 0);
return 0;
}
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
static int axg_frddr_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
tkernel: add base tlinux kernel interfaces Sync kernel codes to the same with 590eaf1fec75 ("Init Repo base on linux 5.4.32 long term, and add base tlinux kernel interfaces."), which is from tk4, and it is the base of tk4. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:08:33 +08:00
unsigned int fifo_depth;
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
int ret;
/* Enable pclk to access registers and clock the fifo ip */
ret = clk_prepare_enable(fifo->pclk);
if (ret)
return ret;
/* Apply single buffer mode to the interface */
regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_FRDDR_PP_MODE, 0);
/*
* TODO: We could adapt the fifo depth and the fifo threshold
* depending on the expected memory throughput and lantencies
* For now, we'll just use the same values as the vendor kernel
* Depth and threshold are zero based.
*/
fifo_depth = AXG_FIFO_MIN_CNT - 1;
tkernel: add base tlinux kernel interfaces Sync kernel codes to the same with 590eaf1fec75 ("Init Repo base on linux 5.4.32 long term, and add base tlinux kernel interfaces."), which is from tk4, and it is the base of tk4. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:08:33 +08:00
regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH_MASK,
CTRL1_FRDDR_DEPTH(fifo_depth));
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
return 0;
}
static void axg_frddr_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
clk_disable_unprepare(fifo->pclk);
}
static int axg_frddr_pcm_new(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_dai *dai)
{
return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_PLAYBACK);
}
static const struct snd_soc_dai_ops axg_frddr_ops = {
.startup = axg_frddr_dai_startup,
.shutdown = axg_frddr_dai_shutdown,
};
static struct snd_soc_dai_driver axg_frddr_dai_drv = {
.name = "FRDDR",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
.rates = AXG_FIFO_RATES,
.formats = AXG_FIFO_FORMATS,
},
.ops = &axg_frddr_ops,
.pcm_new = axg_frddr_pcm_new,
};
static const char * const axg_frddr_sel_texts[] = {
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
"OUT 0", "OUT 1", "OUT 2", "OUT 3", "OUT 4", "OUT 5", "OUT 6", "OUT 7",
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
};
static SOC_ENUM_SINGLE_DECL(axg_frddr_sel_enum, FIFO_CTRL0, CTRL0_SEL_SHIFT,
axg_frddr_sel_texts);
static const struct snd_kcontrol_new axg_frddr_out_demux =
SOC_DAPM_ENUM("Output Sink", axg_frddr_sel_enum);
static const struct snd_soc_dapm_widget axg_frddr_dapm_widgets[] = {
SND_SOC_DAPM_DEMUX("SINK SEL", SND_SOC_NOPM, 0, 0,
&axg_frddr_out_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
};
static const struct snd_soc_dapm_route axg_frddr_dapm_routes[] = {
{ "SINK SEL", NULL, "Playback" },
{ "OUT 0", "OUT 0", "SINK SEL" },
{ "OUT 1", "OUT 1", "SINK SEL" },
{ "OUT 2", "OUT 2", "SINK SEL" },
{ "OUT 3", "OUT 3", "SINK SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
{ "OUT 4", "OUT 4", "SINK SEL" },
{ "OUT 5", "OUT 5", "SINK SEL" },
{ "OUT 6", "OUT 6", "SINK SEL" },
{ "OUT 7", "OUT 7", "SINK SEL" },
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
};
static const struct snd_soc_component_driver axg_frddr_component_drv = {
.dapm_widgets = axg_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(axg_frddr_dapm_widgets),
.dapm_routes = axg_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(axg_frddr_dapm_routes),
.ops = &axg_fifo_pcm_ops
};
static const struct axg_fifo_match_data axg_frddr_match_data = {
tkernel: add base tlinux kernel interfaces Sync kernel codes to the same with 590eaf1fec75 ("Init Repo base on linux 5.4.32 long term, and add base tlinux kernel interfaces."), which is from tk4, and it is the base of tk4. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:08:33 +08:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &axg_frddr_component_drv,
.dai_drv = &axg_frddr_dai_drv
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
};
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
static const struct snd_soc_dai_ops g12a_frddr_ops = {
.prepare = g12a_frddr_dai_prepare,
.startup = axg_frddr_dai_startup,
.shutdown = axg_frddr_dai_shutdown,
};
static struct snd_soc_dai_driver g12a_frddr_dai_drv = {
.name = "FRDDR",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
.rates = AXG_FIFO_RATES,
.formats = AXG_FIFO_FORMATS,
},
.ops = &g12a_frddr_ops,
.pcm_new = axg_frddr_pcm_new,
};
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel1_enum, FIFO_CTRL0, CTRL0_SEL_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel2_enum, FIFO_CTRL0, CTRL0_SEL2_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel3_enum, FIFO_CTRL0, CTRL0_SEL3_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
static const struct snd_kcontrol_new g12a_frddr_out1_demux =
SOC_DAPM_ENUM("Output Src 1", g12a_frddr_sel1_enum);
static const struct snd_kcontrol_new g12a_frddr_out2_demux =
SOC_DAPM_ENUM("Output Src 2", g12a_frddr_sel2_enum);
static const struct snd_kcontrol_new g12a_frddr_out3_demux =
SOC_DAPM_ENUM("Output Src 3", g12a_frddr_sel3_enum);
static const struct snd_kcontrol_new g12a_frddr_out1_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL1_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new g12a_frddr_out2_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL2_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new g12a_frddr_out3_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL3_EN_SHIFT, 1, 0);
static const struct snd_soc_dapm_widget g12a_frddr_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out1_enable),
SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out2_enable),
SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out3_enable),
SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out1_demux),
SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out2_demux),
SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out3_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
};
static const struct snd_soc_dapm_route g12a_frddr_dapm_routes[] = {
{ "SRC 1", NULL, "Playback" },
{ "SRC 2", NULL, "Playback" },
{ "SRC 3", NULL, "Playback" },
{ "SRC 1 EN", "Switch", "SRC 1" },
{ "SRC 2 EN", "Switch", "SRC 2" },
{ "SRC 3 EN", "Switch", "SRC 3" },
{ "SINK 1 SEL", NULL, "SRC 1 EN" },
{ "SINK 2 SEL", NULL, "SRC 2 EN" },
{ "SINK 3 SEL", NULL, "SRC 3 EN" },
{ "OUT 0", "OUT 0", "SINK 1 SEL" },
{ "OUT 1", "OUT 1", "SINK 1 SEL" },
{ "OUT 2", "OUT 2", "SINK 1 SEL" },
{ "OUT 3", "OUT 3", "SINK 1 SEL" },
{ "OUT 4", "OUT 4", "SINK 1 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
{ "OUT 5", "OUT 5", "SINK 1 SEL" },
{ "OUT 6", "OUT 6", "SINK 1 SEL" },
{ "OUT 7", "OUT 7", "SINK 1 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
{ "OUT 0", "OUT 0", "SINK 2 SEL" },
{ "OUT 1", "OUT 1", "SINK 2 SEL" },
{ "OUT 2", "OUT 2", "SINK 2 SEL" },
{ "OUT 3", "OUT 3", "SINK 2 SEL" },
{ "OUT 4", "OUT 4", "SINK 2 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
{ "OUT 5", "OUT 5", "SINK 2 SEL" },
{ "OUT 6", "OUT 6", "SINK 2 SEL" },
{ "OUT 7", "OUT 7", "SINK 2 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
{ "OUT 0", "OUT 0", "SINK 3 SEL" },
{ "OUT 1", "OUT 1", "SINK 3 SEL" },
{ "OUT 2", "OUT 2", "SINK 3 SEL" },
{ "OUT 3", "OUT 3", "SINK 3 SEL" },
{ "OUT 4", "OUT 4", "SINK 3 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:15 +08:00
{ "OUT 5", "OUT 5", "SINK 3 SEL" },
{ "OUT 6", "OUT 6", "SINK 3 SEL" },
{ "OUT 7", "OUT 7", "SINK 3 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
};
static const struct snd_soc_component_driver g12a_frddr_component_drv = {
.dapm_widgets = g12a_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(g12a_frddr_dapm_widgets),
.dapm_routes = g12a_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
.ops = &g12a_fifo_pcm_ops
};
static const struct axg_fifo_match_data g12a_frddr_match_data = {
tkernel: add base tlinux kernel interfaces Sync kernel codes to the same with 590eaf1fec75 ("Init Repo base on linux 5.4.32 long term, and add base tlinux kernel interfaces."), which is from tk4, and it is the base of tk4. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:08:33 +08:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &g12a_frddr_component_drv,
.dai_drv = &g12a_frddr_dai_drv
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
};
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:18 +08:00
/* On SM1, the output selection in on CTRL2 */
static const struct snd_kcontrol_new sm1_frddr_out1_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL1_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new sm1_frddr_out2_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL2_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new sm1_frddr_out3_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL3_EN_SHIFT, 1, 0);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel1_enum, FIFO_CTRL2, CTRL2_SEL1_SHIFT,
axg_frddr_sel_texts);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel2_enum, FIFO_CTRL2, CTRL2_SEL2_SHIFT,
axg_frddr_sel_texts);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel3_enum, FIFO_CTRL2, CTRL2_SEL3_SHIFT,
axg_frddr_sel_texts);
static const struct snd_kcontrol_new sm1_frddr_out1_demux =
SOC_DAPM_ENUM("Output Src 1", sm1_frddr_sel1_enum);
static const struct snd_kcontrol_new sm1_frddr_out2_demux =
SOC_DAPM_ENUM("Output Src 2", sm1_frddr_sel2_enum);
static const struct snd_kcontrol_new sm1_frddr_out3_demux =
SOC_DAPM_ENUM("Output Src 3", sm1_frddr_sel3_enum);
static const struct snd_soc_dapm_widget sm1_frddr_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out1_enable),
SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out2_enable),
SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out3_enable),
SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out1_demux),
SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out2_demux),
SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out3_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
};
static const struct snd_soc_component_driver sm1_frddr_component_drv = {
.dapm_widgets = sm1_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(sm1_frddr_dapm_widgets),
.dapm_routes = g12a_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
.ops = &g12a_fifo_pcm_ops
};
static const struct axg_fifo_match_data sm1_frddr_match_data = {
tkernel: add base tlinux kernel interfaces Sync kernel codes to the same with 590eaf1fec75 ("Init Repo base on linux 5.4.32 long term, and add base tlinux kernel interfaces."), which is from tk4, and it is the base of tk4. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:08:33 +08:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &sm1_frddr_component_drv,
.dai_drv = &g12a_frddr_dai_drv
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:18 +08:00
};
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
static const struct of_device_id axg_frddr_of_match[] = {
{
.compatible = "amlogic,axg-frddr",
.data = &axg_frddr_match_data,
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
}, {
.compatible = "amlogic,g12a-frddr",
.data = &g12a_frddr_match_data,
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 20:01:18 +08:00
}, {
.compatible = "amlogic,sm1-frddr",
.data = &sm1_frddr_match_data,
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
}, {}
};
MODULE_DEVICE_TABLE(of, axg_frddr_of_match);
static struct platform_driver axg_frddr_pdrv = {
.probe = axg_fifo_probe,
.driver = {
.name = "axg-frddr",
.of_match_table = axg_frddr_of_match,
},
};
module_platform_driver(axg_frddr_pdrv);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 19:17:31 +08:00
MODULE_DESCRIPTION("Amlogic AXG/G12A playback fifo driver");
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 23:42:52 +08:00
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL v2");