UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/soc/codecs/rt1011.c

2273 lines
59 KiB
C
Raw Normal View History

ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* rt1011.c -- rt1011 ALSA SoC amplifier component driver
*
* Copyright(c) 2019 Realtek Semiconductor Corp.
*
* Author: Shuming Fan <shumingf@realtek.com>
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/regmap.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/firmware.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include "rl6231.h"
#include "rt1011.h"
static int rt1011_calibrate(struct rt1011_priv *rt1011,
unsigned char cali_flag);
static const struct reg_sequence init_list[] = {
{ RT1011_POWER_9, 0xa840 },
{ RT1011_ADC_SET_5, 0x0a20 },
ASoC: rt1011: fix DC calibration offset not applying There are two issues to fix: - DC offset calibration data will be reset after stopping playback. - DC offset calibration data should be applied in the initial setting. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190711082214.8142-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-11 16:22:14 +08:00
{ RT1011_DAC_SET_2, 0xa032 },
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
{ RT1011_ADC_SET_1, 0x2925 },
{ RT1011_SPK_PRO_DC_DET_1, 0xb00c },
{ RT1011_SPK_PRO_DC_DET_2, 0xcccc },
{ RT1011_A_TIMING_1, 0x6054 },
{ RT1011_POWER_7, 0x3e55 },
{ RT1011_POWER_8, 0x0520 },
{ RT1011_BOOST_CON_1, 0xe188 },
{ RT1011_POWER_4, 0x16f2 },
{ RT1011_CROSS_BQ_SET_1, 0x0004 },
{ RT1011_SIL_DET, 0xc313 },
{ RT1011_SINE_GEN_REG_1, 0x0707 },
{ RT1011_DC_CALIB_CLASSD_3, 0xcb00 },
{ RT1011_DAC_SET_1, 0xe702 },
{ RT1011_DAC_SET_3, 0x2004 },
};
#define RT1011_INIT_REG_LEN ARRAY_SIZE(init_list)
static const struct reg_default rt1011_reg[] = {
{0x0000, 0x0000},
{0x0002, 0x0000},
{0x0004, 0xa000},
{0x0006, 0x0000},
{0x0008, 0x0003},
{0x000a, 0x087e},
{0x000c, 0x0020},
{0x000e, 0x9002},
{0x0010, 0x0000},
{0x0012, 0x0000},
{0x0020, 0x0c40},
{0x0022, 0x4313},
{0x0076, 0x0000},
{0x0078, 0x0000},
{0x007a, 0x0000},
{0x007c, 0x10ec},
{0x007d, 0x1011},
{0x00f0, 0x5000},
{0x00f2, 0x0374},
{0x00f3, 0x0000},
{0x00f4, 0x0000},
{0x0100, 0x0038},
{0x0102, 0xff02},
{0x0104, 0x0232},
{0x0106, 0x200c},
{0x0107, 0x0000},
{0x0108, 0x2f2f},
{0x010a, 0x2f2f},
{0x010c, 0x002f},
{0x010e, 0xe000},
{0x0110, 0x0820},
{0x0111, 0x4010},
{0x0112, 0x0000},
{0x0114, 0x0000},
{0x0116, 0x0000},
{0x0118, 0x0000},
{0x011a, 0x0101},
{0x011c, 0x4567},
{0x011e, 0x0000},
{0x0120, 0x0000},
{0x0122, 0x0000},
{0x0124, 0x0123},
{0x0126, 0x4567},
{0x0200, 0x0000},
{0x0300, 0xffdd},
{0x0302, 0x001e},
{0x0311, 0x0000},
{0x0313, 0x5254},
{0x0314, 0x0062},
{0x0316, 0x7f40},
{0x0319, 0x000f},
{0x031a, 0xffff},
{0x031b, 0x0000},
{0x031c, 0x009f},
{0x031d, 0xffff},
{0x031e, 0x0000},
{0x031f, 0x0000},
{0x0320, 0xe31c},
{0x0321, 0x0000},
{0x0322, 0x0000},
{0x0324, 0x0000},
{0x0326, 0x0002},
{0x0328, 0x20b2},
{0x0329, 0x0175},
{0x032a, 0x32ad},
{0x032b, 0x3455},
{0x032c, 0x0528},
{0x032d, 0xa800},
{0x032e, 0x030e},
{0x0330, 0x2080},
{0x0332, 0x0034},
{0x0334, 0x0000},
{0x0508, 0x0010},
{0x050a, 0x0018},
{0x050c, 0x0000},
{0x050d, 0xffff},
{0x050e, 0x1f1f},
{0x050f, 0x04ff},
{0x0510, 0x4020},
{0x0511, 0x01f0},
{0x0512, 0x0702},
{0x0516, 0xbb80},
{0x0517, 0xffff},
{0x0518, 0xffff},
{0x0519, 0x307f},
{0x051a, 0xffff},
{0x051b, 0x0000},
{0x051c, 0x0000},
{0x051d, 0x2000},
{0x051e, 0x0000},
{0x051f, 0x0000},
{0x0520, 0x0000},
{0x0521, 0x1001},
{0x0522, 0x7fff},
{0x0524, 0x7fff},
{0x0526, 0x0000},
{0x0528, 0x0000},
{0x052a, 0x0000},
{0x0530, 0x0401},
{0x0532, 0x3000},
{0x0534, 0x0000},
{0x0535, 0xffff},
{0x0536, 0x101c},
{0x0538, 0x1814},
{0x053a, 0x100c},
{0x053c, 0x0804},
{0x053d, 0x0000},
{0x053e, 0x0000},
{0x053f, 0x0000},
{0x0540, 0x0000},
{0x0541, 0x0000},
{0x0542, 0x0000},
{0x0543, 0x0000},
{0x0544, 0x001c},
{0x0545, 0x1814},
{0x0546, 0x100c},
{0x0547, 0x0804},
{0x0548, 0x0000},
{0x0549, 0x0000},
{0x054a, 0x0000},
{0x054b, 0x0000},
{0x054c, 0x0000},
{0x054d, 0x0000},
{0x054e, 0x0000},
{0x054f, 0x0000},
{0x0566, 0x0000},
{0x0568, 0x20f1},
{0x056a, 0x0007},
{0x0600, 0x9d00},
{0x0611, 0x2000},
{0x0612, 0x505f},
{0x0613, 0x0444},
{0x0614, 0x4000},
{0x0615, 0x4004},
{0x0616, 0x0606},
{0x0617, 0x8904},
{0x0618, 0xe021},
{0x0621, 0x2000},
{0x0622, 0x505f},
{0x0623, 0x0444},
{0x0624, 0x4000},
{0x0625, 0x4004},
{0x0626, 0x0606},
{0x0627, 0x8704},
{0x0628, 0xe021},
{0x0631, 0x2000},
{0x0632, 0x517f},
{0x0633, 0x0440},
{0x0634, 0x4000},
{0x0635, 0x4104},
{0x0636, 0x0306},
{0x0637, 0x8904},
{0x0638, 0xe021},
{0x0702, 0x0014},
{0x0704, 0x0000},
{0x0706, 0x0014},
{0x0708, 0x0000},
{0x070a, 0x0000},
{0x0710, 0x0200},
{0x0711, 0x0000},
{0x0712, 0x0200},
{0x0713, 0x0000},
{0x0720, 0x0200},
{0x0721, 0x0000},
{0x0722, 0x0000},
{0x0723, 0x0000},
{0x0724, 0x0000},
{0x0725, 0x0000},
{0x0726, 0x0000},
{0x0727, 0x0000},
{0x0728, 0x0000},
{0x0729, 0x0000},
{0x0730, 0x0200},
{0x0731, 0x0000},
{0x0732, 0x0000},
{0x0733, 0x0000},
{0x0734, 0x0000},
{0x0735, 0x0000},
{0x0736, 0x0000},
{0x0737, 0x0000},
{0x0738, 0x0000},
{0x0739, 0x0000},
{0x0740, 0x0200},
{0x0741, 0x0000},
{0x0742, 0x0000},
{0x0743, 0x0000},
{0x0744, 0x0000},
{0x0745, 0x0000},
{0x0746, 0x0000},
{0x0747, 0x0000},
{0x0748, 0x0000},
{0x0749, 0x0000},
{0x0750, 0x0200},
{0x0751, 0x0000},
{0x0752, 0x0000},
{0x0753, 0x0000},
{0x0754, 0x0000},
{0x0755, 0x0000},
{0x0756, 0x0000},
{0x0757, 0x0000},
{0x0758, 0x0000},
{0x0759, 0x0000},
{0x0760, 0x0200},
{0x0761, 0x0000},
{0x0762, 0x0000},
{0x0763, 0x0000},
{0x0764, 0x0000},
{0x0765, 0x0000},
{0x0766, 0x0000},
{0x0767, 0x0000},
{0x0768, 0x0000},
{0x0769, 0x0000},
{0x0770, 0x0200},
{0x0771, 0x0000},
{0x0772, 0x0000},
{0x0773, 0x0000},
{0x0774, 0x0000},
{0x0775, 0x0000},
{0x0776, 0x0000},
{0x0777, 0x0000},
{0x0778, 0x0000},
{0x0779, 0x0000},
{0x0780, 0x0200},
{0x0781, 0x0000},
{0x0782, 0x0000},
{0x0783, 0x0000},
{0x0784, 0x0000},
{0x0785, 0x0000},
{0x0786, 0x0000},
{0x0787, 0x0000},
{0x0788, 0x0000},
{0x0789, 0x0000},
{0x0790, 0x0200},
{0x0791, 0x0000},
{0x0792, 0x0000},
{0x0793, 0x0000},
{0x0794, 0x0000},
{0x0795, 0x0000},
{0x0796, 0x0000},
{0x0797, 0x0000},
{0x0798, 0x0000},
{0x0799, 0x0000},
{0x07a0, 0x0200},
{0x07a1, 0x0000},
{0x07a2, 0x0000},
{0x07a3, 0x0000},
{0x07a4, 0x0000},
{0x07a5, 0x0000},
{0x07a6, 0x0000},
{0x07a7, 0x0000},
{0x07a8, 0x0000},
{0x07a9, 0x0000},
{0x07b0, 0x0200},
{0x07b1, 0x0000},
{0x07b2, 0x0000},
{0x07b3, 0x0000},
{0x07b4, 0x0000},
{0x07b5, 0x0000},
{0x07b6, 0x0000},
{0x07b7, 0x0000},
{0x07b8, 0x0000},
{0x07b9, 0x0000},
{0x07c0, 0x0200},
{0x07c1, 0x0000},
{0x07c2, 0x0000},
{0x07c3, 0x0000},
{0x07c4, 0x0000},
{0x07c5, 0x0000},
{0x07c6, 0x0000},
{0x07c7, 0x0000},
{0x07c8, 0x0000},
{0x07c9, 0x0000},
{0x1000, 0x4040},
{0x1002, 0x6505},
{0x1004, 0x5405},
{0x1006, 0x5555},
{0x1007, 0x003f},
{0x1008, 0x7fd7},
{0x1009, 0x770f},
{0x100a, 0xfffe},
{0x100b, 0xe000},
{0x100c, 0x0000},
{0x100d, 0x0007},
{0x1010, 0xa433},
{0x1020, 0x0000},
{0x1022, 0x0000},
{0x1024, 0x0000},
{0x1200, 0x5a01},
{0x1202, 0x6324},
{0x1204, 0x0b00},
{0x1206, 0x0000},
{0x1208, 0x0000},
{0x120a, 0x0024},
{0x120c, 0x0000},
{0x120e, 0x000e},
{0x1210, 0x0000},
{0x1212, 0x0000},
{0x1300, 0x0701},
{0x1302, 0x12f9},
{0x1304, 0x3405},
{0x1305, 0x0844},
{0x1306, 0x5611},
{0x1308, 0x555e},
{0x130a, 0xa605},
{0x130c, 0x2000},
{0x130e, 0x0000},
{0x130f, 0x0001},
{0x1310, 0xaa48},
{0x1312, 0x0285},
{0x1314, 0xaaaa},
{0x1316, 0xaaa0},
{0x1318, 0x2aaa},
{0x131a, 0xaa07},
{0x1322, 0x0029},
{0x1323, 0x4a52},
{0x1324, 0x002c},
{0x1325, 0x0b02},
{0x1326, 0x002d},
{0x1327, 0x6b5a},
{0x1328, 0x002e},
{0x1329, 0xcbb2},
{0x132a, 0x0030},
{0x132b, 0x2c0b},
{0x1330, 0x0031},
{0x1331, 0x8c63},
{0x1332, 0x0032},
{0x1333, 0xecbb},
{0x1334, 0x0034},
{0x1335, 0x4d13},
{0x1336, 0x0037},
{0x1337, 0x0dc3},
{0x1338, 0x003d},
{0x1339, 0xef7b},
{0x133a, 0x0044},
{0x133b, 0xd134},
{0x133c, 0x0047},
{0x133d, 0x91e4},
{0x133e, 0x004d},
{0x133f, 0xc370},
{0x1340, 0x0053},
{0x1341, 0xf4fd},
{0x1342, 0x0060},
{0x1343, 0x5816},
{0x1344, 0x006c},
{0x1345, 0xbb2e},
{0x1346, 0x0072},
{0x1347, 0xecbb},
{0x1348, 0x0076},
{0x1349, 0x5d97},
{0x1500, 0x0702},
{0x1502, 0x002f},
{0x1504, 0x0000},
{0x1510, 0x0064},
{0x1512, 0x0000},
{0x1514, 0xdf47},
{0x1516, 0x079c},
{0x1518, 0xfbf5},
{0x151a, 0x00bc},
{0x151c, 0x3b85},
{0x151e, 0x02b3},
{0x1520, 0x3333},
{0x1522, 0x0000},
{0x1524, 0x4000},
{0x1528, 0x0064},
{0x152a, 0x0000},
{0x152c, 0x0000},
{0x152e, 0x0000},
{0x1530, 0x0000},
{0x1532, 0x0000},
{0x1534, 0x0000},
{0x1536, 0x0000},
{0x1538, 0x0040},
{0x1539, 0x0000},
{0x153a, 0x0040},
{0x153b, 0x0000},
{0x153c, 0x0064},
{0x153e, 0x0bf9},
{0x1540, 0xb2a9},
{0x1544, 0x0200},
{0x1546, 0x0000},
{0x1548, 0x00ca},
{0x1552, 0x03ff},
{0x1554, 0x017f},
{0x1556, 0x017f},
{0x155a, 0x0000},
{0x155c, 0x0000},
{0x1560, 0x0040},
{0x1562, 0x0000},
{0x1570, 0x03ff},
{0x1571, 0xdcff},
{0x1572, 0x1e00},
{0x1573, 0x224f},
{0x1574, 0x0000},
{0x1575, 0x0000},
{0x1576, 0x1e00},
{0x1577, 0x0000},
{0x1578, 0x0000},
{0x1579, 0x1128},
{0x157a, 0x03ff},
{0x157b, 0xdcff},
{0x157c, 0x1e00},
{0x157d, 0x224f},
{0x157e, 0x0000},
{0x157f, 0x0000},
{0x1580, 0x1e00},
{0x1581, 0x0000},
{0x1582, 0x0000},
{0x1583, 0x1128},
{0x1590, 0x03ff},
{0x1591, 0xdcff},
{0x1592, 0x1e00},
{0x1593, 0x224f},
{0x1594, 0x0000},
{0x1595, 0x0000},
{0x1596, 0x1e00},
{0x1597, 0x0000},
{0x1598, 0x0000},
{0x1599, 0x1128},
{0x159a, 0x03ff},
{0x159b, 0xdcff},
{0x159c, 0x1e00},
{0x159d, 0x224f},
{0x159e, 0x0000},
{0x159f, 0x0000},
{0x15a0, 0x1e00},
{0x15a1, 0x0000},
{0x15a2, 0x0000},
{0x15a3, 0x1128},
{0x15b0, 0x007f},
{0x15b1, 0xffff},
{0x15b2, 0x007f},
{0x15b3, 0xffff},
{0x15b4, 0x007f},
{0x15b5, 0xffff},
{0x15b8, 0x007f},
{0x15b9, 0xffff},
{0x15bc, 0x0000},
{0x15bd, 0x0000},
{0x15be, 0xff00},
{0x15bf, 0x0000},
{0x15c0, 0xff00},
{0x15c1, 0x0000},
{0x15c3, 0xfc00},
{0x15c4, 0xbb80},
{0x15d0, 0x0000},
{0x15d1, 0x0000},
{0x15d2, 0x0000},
{0x15d3, 0x0000},
{0x15d4, 0x0000},
{0x15d5, 0x0000},
{0x15d6, 0x0000},
{0x15d7, 0x0000},
{0x15d8, 0x0200},
{0x15d9, 0x0000},
{0x15da, 0x0000},
{0x15db, 0x0000},
{0x15dc, 0x0000},
{0x15dd, 0x0000},
{0x15de, 0x0000},
{0x15df, 0x0000},
{0x15e0, 0x0000},
{0x15e1, 0x0000},
{0x15e2, 0x0200},
{0x15e3, 0x0000},
{0x15e4, 0x0000},
{0x15e5, 0x0000},
{0x15e6, 0x0000},
{0x15e7, 0x0000},
{0x15e8, 0x0000},
{0x15e9, 0x0000},
{0x15ea, 0x0000},
{0x15eb, 0x0000},
{0x15ec, 0x0200},
{0x15ed, 0x0000},
{0x15ee, 0x0000},
{0x15ef, 0x0000},
{0x15f0, 0x0000},
{0x15f1, 0x0000},
{0x15f2, 0x0000},
{0x15f3, 0x0000},
{0x15f4, 0x0000},
{0x15f5, 0x0000},
{0x15f6, 0x0200},
{0x15f7, 0x0200},
{0x15f8, 0x8200},
{0x15f9, 0x0000},
{0x1600, 0x007d},
{0x1601, 0xa178},
{0x1602, 0x00c2},
{0x1603, 0x5383},
{0x1604, 0x0000},
{0x1605, 0x02c1},
{0x1606, 0x007d},
{0x1607, 0xa178},
{0x1608, 0x00c2},
{0x1609, 0x5383},
{0x160a, 0x003e},
{0x160b, 0xd37d},
{0x1611, 0x3210},
{0x1612, 0x7418},
{0x1613, 0xc0ff},
{0x1614, 0x0000},
{0x1615, 0x00ff},
{0x1616, 0x0000},
{0x1617, 0x0000},
{0x1621, 0x6210},
{0x1622, 0x7418},
{0x1623, 0xc0ff},
{0x1624, 0x0000},
{0x1625, 0x00ff},
{0x1626, 0x0000},
{0x1627, 0x0000},
{0x1631, 0x3a14},
{0x1632, 0x7418},
{0x1633, 0xc3ff},
{0x1634, 0x0000},
{0x1635, 0x00ff},
{0x1636, 0x0000},
{0x1637, 0x0000},
{0x1638, 0x0000},
{0x163a, 0x0000},
{0x163c, 0x0000},
{0x163e, 0x0000},
{0x1640, 0x0000},
{0x1642, 0x0000},
{0x1644, 0x0000},
{0x1646, 0x0000},
{0x1648, 0x0000},
{0x1650, 0x0000},
{0x1652, 0x0000},
{0x1654, 0x0000},
{0x1656, 0x0000},
{0x1658, 0x0000},
{0x1660, 0x0000},
{0x1662, 0x0000},
{0x1664, 0x0000},
{0x1666, 0x0000},
{0x1668, 0x0000},
{0x1670, 0x0000},
{0x1672, 0x0000},
{0x1674, 0x0000},
{0x1676, 0x0000},
{0x1678, 0x0000},
{0x1680, 0x0000},
{0x1682, 0x0000},
{0x1684, 0x0000},
{0x1686, 0x0000},
{0x1688, 0x0000},
{0x1690, 0x0000},
{0x1692, 0x0000},
{0x1694, 0x0000},
{0x1696, 0x0000},
{0x1698, 0x0000},
{0x1700, 0x0000},
{0x1702, 0x0000},
{0x1704, 0x0000},
{0x1706, 0x0000},
{0x1708, 0x0000},
{0x1710, 0x0000},
{0x1712, 0x0000},
{0x1714, 0x0000},
{0x1716, 0x0000},
{0x1718, 0x0000},
{0x1720, 0x0000},
{0x1722, 0x0000},
{0x1724, 0x0000},
{0x1726, 0x0000},
{0x1728, 0x0000},
{0x1730, 0x0000},
{0x1732, 0x0000},
{0x1734, 0x0000},
{0x1736, 0x0000},
{0x1738, 0x0000},
{0x173a, 0x0000},
{0x173c, 0x0000},
{0x173e, 0x0000},
{0x17bb, 0x0500},
{0x17bd, 0x0004},
{0x17bf, 0x0004},
{0x17c1, 0x0004},
{0x17c2, 0x7fff},
{0x17c3, 0x0000},
{0x17c5, 0x0000},
{0x17c7, 0x0000},
{0x17c9, 0x0000},
{0x17cb, 0x2010},
{0x17cd, 0x0000},
{0x17cf, 0x0000},
{0x17d1, 0x0000},
{0x17d3, 0x0000},
{0x17d5, 0x0000},
{0x17d7, 0x0000},
{0x17d9, 0x0000},
{0x17db, 0x0000},
{0x17dd, 0x0000},
{0x17df, 0x0000},
{0x17e1, 0x0000},
{0x17e3, 0x0000},
{0x17e5, 0x0000},
{0x17e7, 0x0000},
{0x17e9, 0x0000},
{0x17eb, 0x0000},
{0x17ed, 0x0000},
{0x17ef, 0x0000},
{0x17f1, 0x0000},
{0x17f3, 0x0000},
{0x17f5, 0x0000},
{0x17f7, 0x0000},
{0x17f9, 0x0000},
{0x17fb, 0x0000},
{0x17fd, 0x0000},
{0x17ff, 0x0000},
{0x1801, 0x0000},
{0x1803, 0x0000},
};
static int rt1011_reg_init(struct snd_soc_component *component)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
regmap_multi_reg_write(rt1011->regmap, init_list, RT1011_INIT_REG_LEN);
return 0;
}
static bool rt1011_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case RT1011_RESET:
case RT1011_SRC_2:
case RT1011_CLK_DET:
case RT1011_SIL_DET:
case RT1011_VERSION_ID:
case RT1011_VENDOR_ID:
case RT1011_DEVICE_ID:
case RT1011_DUM_RO:
case RT1011_DAC_SET_3:
case RT1011_PWM_CAL:
case RT1011_SPK_VOL_TEST_OUT:
case RT1011_VBAT_VOL_DET_1:
case RT1011_VBAT_TEST_OUT_1:
case RT1011_VBAT_TEST_OUT_2:
case RT1011_VBAT_PROTECTION:
case RT1011_VBAT_DET:
case RT1011_BOOST_CON_1:
case RT1011_SHORT_CIRCUIT_DET_1:
case RT1011_SPK_TEMP_PROTECT_3:
case RT1011_SPK_TEMP_PROTECT_6:
case RT1011_SPK_PRO_DC_DET_3:
case RT1011_SPK_PRO_DC_DET_7:
case RT1011_SPK_PRO_DC_DET_8:
case RT1011_SPL_1:
case RT1011_SPL_4:
case RT1011_EXCUR_PROTECT_1:
case RT1011_CROSS_BQ_SET_1:
case RT1011_CROSS_BQ_SET_2:
case RT1011_BQ_SET_0:
case RT1011_BQ_SET_1:
case RT1011_BQ_SET_2:
case RT1011_TEST_PAD_STATUS:
case RT1011_DC_CALIB_CLASSD_1:
case RT1011_DC_CALIB_CLASSD_5:
case RT1011_DC_CALIB_CLASSD_6:
case RT1011_DC_CALIB_CLASSD_7:
case RT1011_DC_CALIB_CLASSD_8:
case RT1011_SINE_GEN_REG_2:
case RT1011_STP_CALIB_RS_TEMP:
case RT1011_SPK_RESISTANCE_1:
case RT1011_SPK_RESISTANCE_2:
case RT1011_SPK_THERMAL:
case RT1011_ALC_BK_GAIN_O:
case RT1011_ALC_BK_GAIN_O_PRE:
case RT1011_SPK_DC_O_23_16:
case RT1011_SPK_DC_O_15_0:
case RT1011_INIT_RECIPROCAL_SYN_24_16:
case RT1011_INIT_RECIPROCAL_SYN_15_0:
case RT1011_SPK_EXCURSION_23_16:
case RT1011_SPK_EXCURSION_15_0:
case RT1011_SEP_MAIN_OUT_23_16:
case RT1011_SEP_MAIN_OUT_15_0:
case RT1011_ALC_DRC_HB_INTERNAL_5:
case RT1011_ALC_DRC_HB_INTERNAL_6:
case RT1011_ALC_DRC_HB_INTERNAL_7:
case RT1011_ALC_DRC_BB_INTERNAL_5:
case RT1011_ALC_DRC_BB_INTERNAL_6:
case RT1011_ALC_DRC_BB_INTERNAL_7:
case RT1011_ALC_DRC_POS_INTERNAL_5:
case RT1011_ALC_DRC_POS_INTERNAL_6:
case RT1011_ALC_DRC_POS_INTERNAL_7:
case RT1011_ALC_DRC_POS_INTERNAL_8:
case RT1011_ALC_DRC_POS_INTERNAL_9:
case RT1011_ALC_DRC_POS_INTERNAL_10:
case RT1011_ALC_DRC_POS_INTERNAL_11:
case RT1011_IRQ_1:
case RT1011_EFUSE_CONTROL_1:
case RT1011_EFUSE_CONTROL_2:
case RT1011_EFUSE_MATCH_DONE ... RT1011_EFUSE_READ_R0_3_15_0:
return true;
default:
return false;
}
}
static bool rt1011_readable_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case RT1011_RESET:
case RT1011_CLK_1:
case RT1011_CLK_2:
case RT1011_CLK_3:
case RT1011_CLK_4:
case RT1011_PLL_1:
case RT1011_PLL_2:
case RT1011_SRC_1:
case RT1011_SRC_2:
case RT1011_SRC_3:
case RT1011_CLK_DET:
case RT1011_SIL_DET:
case RT1011_PRIV_INDEX:
case RT1011_PRIV_DATA:
case RT1011_CUSTOMER_ID:
case RT1011_FM_VER:
case RT1011_VERSION_ID:
case RT1011_VENDOR_ID:
case RT1011_DEVICE_ID:
case RT1011_DUM_RW_0:
case RT1011_DUM_YUN:
case RT1011_DUM_RW_1:
case RT1011_DUM_RO:
case RT1011_MAN_I2C_DEV:
case RT1011_DAC_SET_1:
case RT1011_DAC_SET_2:
case RT1011_DAC_SET_3:
case RT1011_ADC_SET:
case RT1011_ADC_SET_1:
case RT1011_ADC_SET_2:
case RT1011_ADC_SET_3:
case RT1011_ADC_SET_4:
case RT1011_ADC_SET_5:
case RT1011_TDM_TOTAL_SET:
case RT1011_TDM1_SET_TCON:
case RT1011_TDM1_SET_1:
case RT1011_TDM1_SET_2:
case RT1011_TDM1_SET_3:
case RT1011_TDM1_SET_4:
case RT1011_TDM1_SET_5:
case RT1011_TDM2_SET_1:
case RT1011_TDM2_SET_2:
case RT1011_TDM2_SET_3:
case RT1011_TDM2_SET_4:
case RT1011_TDM2_SET_5:
case RT1011_PWM_CAL:
case RT1011_MIXER_1:
case RT1011_MIXER_2:
case RT1011_ADRC_LIMIT:
case RT1011_A_PRO:
case RT1011_A_TIMING_1:
case RT1011_A_TIMING_2:
case RT1011_A_TEMP_SEN:
case RT1011_SPK_VOL_DET_1:
case RT1011_SPK_VOL_DET_2:
case RT1011_SPK_VOL_TEST_OUT:
case RT1011_VBAT_VOL_DET_1:
case RT1011_VBAT_VOL_DET_2:
case RT1011_VBAT_TEST_OUT_1:
case RT1011_VBAT_TEST_OUT_2:
case RT1011_VBAT_PROTECTION:
case RT1011_VBAT_DET:
case RT1011_POWER_1:
case RT1011_POWER_2:
case RT1011_POWER_3:
case RT1011_POWER_4:
case RT1011_POWER_5:
case RT1011_POWER_6:
case RT1011_POWER_7:
case RT1011_POWER_8:
case RT1011_POWER_9:
case RT1011_CLASS_D_POS:
case RT1011_BOOST_CON_1:
case RT1011_BOOST_CON_2:
case RT1011_ANALOG_CTRL:
case RT1011_POWER_SEQ:
case RT1011_SHORT_CIRCUIT_DET_1:
case RT1011_SHORT_CIRCUIT_DET_2:
case RT1011_SPK_TEMP_PROTECT_0:
case RT1011_SPK_TEMP_PROTECT_1:
case RT1011_SPK_TEMP_PROTECT_2:
case RT1011_SPK_TEMP_PROTECT_3:
case RT1011_SPK_TEMP_PROTECT_4:
case RT1011_SPK_TEMP_PROTECT_5:
case RT1011_SPK_TEMP_PROTECT_6:
case RT1011_SPK_TEMP_PROTECT_7:
case RT1011_SPK_TEMP_PROTECT_8:
case RT1011_SPK_TEMP_PROTECT_9:
case RT1011_SPK_PRO_DC_DET_1:
case RT1011_SPK_PRO_DC_DET_2:
case RT1011_SPK_PRO_DC_DET_3:
case RT1011_SPK_PRO_DC_DET_4:
case RT1011_SPK_PRO_DC_DET_5:
case RT1011_SPK_PRO_DC_DET_6:
case RT1011_SPK_PRO_DC_DET_7:
case RT1011_SPK_PRO_DC_DET_8:
case RT1011_SPL_1:
case RT1011_SPL_2:
case RT1011_SPL_3:
case RT1011_SPL_4:
case RT1011_THER_FOLD_BACK_1:
case RT1011_THER_FOLD_BACK_2:
case RT1011_EXCUR_PROTECT_1:
case RT1011_EXCUR_PROTECT_2:
case RT1011_EXCUR_PROTECT_3:
case RT1011_EXCUR_PROTECT_4:
case RT1011_BAT_GAIN_1:
case RT1011_BAT_GAIN_2:
case RT1011_BAT_GAIN_3:
case RT1011_BAT_GAIN_4:
case RT1011_BAT_GAIN_5:
case RT1011_BAT_GAIN_6:
case RT1011_BAT_GAIN_7:
case RT1011_BAT_GAIN_8:
case RT1011_BAT_GAIN_9:
case RT1011_BAT_GAIN_10:
case RT1011_BAT_GAIN_11:
case RT1011_BAT_RT_THMAX_1:
case RT1011_BAT_RT_THMAX_2:
case RT1011_BAT_RT_THMAX_3:
case RT1011_BAT_RT_THMAX_4:
case RT1011_BAT_RT_THMAX_5:
case RT1011_BAT_RT_THMAX_6:
case RT1011_BAT_RT_THMAX_7:
case RT1011_BAT_RT_THMAX_8:
case RT1011_BAT_RT_THMAX_9:
case RT1011_BAT_RT_THMAX_10:
case RT1011_BAT_RT_THMAX_11:
case RT1011_BAT_RT_THMAX_12:
case RT1011_SPREAD_SPECTURM:
case RT1011_PRO_GAIN_MODE:
case RT1011_RT_DRC_CROSS:
case RT1011_RT_DRC_HB_1:
case RT1011_RT_DRC_HB_2:
case RT1011_RT_DRC_HB_3:
case RT1011_RT_DRC_HB_4:
case RT1011_RT_DRC_HB_5:
case RT1011_RT_DRC_HB_6:
case RT1011_RT_DRC_HB_7:
case RT1011_RT_DRC_HB_8:
case RT1011_RT_DRC_BB_1:
case RT1011_RT_DRC_BB_2:
case RT1011_RT_DRC_BB_3:
case RT1011_RT_DRC_BB_4:
case RT1011_RT_DRC_BB_5:
case RT1011_RT_DRC_BB_6:
case RT1011_RT_DRC_BB_7:
case RT1011_RT_DRC_BB_8:
case RT1011_RT_DRC_POS_1:
case RT1011_RT_DRC_POS_2:
case RT1011_RT_DRC_POS_3:
case RT1011_RT_DRC_POS_4:
case RT1011_RT_DRC_POS_5:
case RT1011_RT_DRC_POS_6:
case RT1011_RT_DRC_POS_7:
case RT1011_RT_DRC_POS_8:
case RT1011_CROSS_BQ_SET_1:
case RT1011_CROSS_BQ_SET_2:
case RT1011_BQ_SET_0:
case RT1011_BQ_SET_1:
case RT1011_BQ_SET_2:
case RT1011_BQ_PRE_GAIN_28_16:
case RT1011_BQ_PRE_GAIN_15_0:
case RT1011_BQ_POST_GAIN_28_16:
case RT1011_BQ_POST_GAIN_15_0:
case RT1011_BQ_H0_28_16 ... RT1011_BQ_A2_15_0:
case RT1011_BQ_1_H0_28_16 ... RT1011_BQ_1_A2_15_0:
case RT1011_BQ_2_H0_28_16 ... RT1011_BQ_2_A2_15_0:
case RT1011_BQ_3_H0_28_16 ... RT1011_BQ_3_A2_15_0:
case RT1011_BQ_4_H0_28_16 ... RT1011_BQ_4_A2_15_0:
case RT1011_BQ_5_H0_28_16 ... RT1011_BQ_5_A2_15_0:
case RT1011_BQ_6_H0_28_16 ... RT1011_BQ_6_A2_15_0:
case RT1011_BQ_7_H0_28_16 ... RT1011_BQ_7_A2_15_0:
case RT1011_BQ_8_H0_28_16 ... RT1011_BQ_8_A2_15_0:
case RT1011_BQ_9_H0_28_16 ... RT1011_BQ_9_A2_15_0:
case RT1011_BQ_10_H0_28_16 ... RT1011_BQ_10_A2_15_0:
case RT1011_TEST_PAD_STATUS ... RT1011_PLL_INTERNAL_SET:
case RT1011_TEST_OUT_1 ... RT1011_TEST_OUT_3:
case RT1011_DC_CALIB_CLASSD_1 ... RT1011_DC_CALIB_CLASSD_10:
case RT1011_CLASSD_INTERNAL_SET_1 ... RT1011_VREF_LV_1:
case RT1011_SMART_BOOST_TIMING_1 ... RT1011_SMART_BOOST_TIMING_36:
case RT1011_SINE_GEN_REG_1 ... RT1011_SINE_GEN_REG_3:
case RT1011_STP_INITIAL_RS_TEMP ... RT1011_SPK_THERMAL:
case RT1011_STP_OTP_TH ... RT1011_INIT_RECIPROCAL_SYN_15_0:
case RT1011_STP_BQ_1_A1_L_28_16 ... RT1011_STP_BQ_1_H0_R_15_0:
case RT1011_STP_BQ_2_A1_L_28_16 ... RT1011_SEP_RE_REG_15_0:
case RT1011_DRC_CF_PARAMS_1 ... RT1011_DRC_CF_PARAMS_12:
case RT1011_ALC_DRC_HB_INTERNAL_1 ... RT1011_ALC_DRC_HB_INTERNAL_7:
case RT1011_ALC_DRC_BB_INTERNAL_1 ... RT1011_ALC_DRC_BB_INTERNAL_7:
case RT1011_ALC_DRC_POS_INTERNAL_1 ... RT1011_ALC_DRC_POS_INTERNAL_8:
case RT1011_ALC_DRC_POS_INTERNAL_9 ... RT1011_BQ_1_PARAMS_CHECK_5:
case RT1011_BQ_2_PARAMS_CHECK_1 ... RT1011_BQ_2_PARAMS_CHECK_5:
case RT1011_BQ_3_PARAMS_CHECK_1 ... RT1011_BQ_3_PARAMS_CHECK_5:
case RT1011_BQ_4_PARAMS_CHECK_1 ... RT1011_BQ_4_PARAMS_CHECK_5:
case RT1011_BQ_5_PARAMS_CHECK_1 ... RT1011_BQ_5_PARAMS_CHECK_5:
case RT1011_BQ_6_PARAMS_CHECK_1 ... RT1011_BQ_6_PARAMS_CHECK_5:
case RT1011_BQ_7_PARAMS_CHECK_1 ... RT1011_BQ_7_PARAMS_CHECK_5:
case RT1011_BQ_8_PARAMS_CHECK_1 ... RT1011_BQ_8_PARAMS_CHECK_5:
case RT1011_BQ_9_PARAMS_CHECK_1 ... RT1011_BQ_9_PARAMS_CHECK_5:
case RT1011_BQ_10_PARAMS_CHECK_1 ... RT1011_BQ_10_PARAMS_CHECK_5:
case RT1011_IRQ_1 ... RT1011_PART_NUMBER_EFUSE:
case RT1011_EFUSE_CONTROL_1 ... RT1011_EFUSE_READ_R0_3_15_0:
return true;
default:
return false;
}
}
static const char * const rt1011_din_source_select[] = {
"Left",
"Right",
"Left + Right average",
};
static SOC_ENUM_SINGLE_DECL(rt1011_din_source_enum, RT1011_CROSS_BQ_SET_1, 5,
rt1011_din_source_select);
static const char * const rt1011_tdm_data_out_select[] = {
"TDM_O_LR", "BQ1", "DVOL", "BQ10", "ALC", "DMIX", "ADC_SRC_LR",
"ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS",
"SEP_O_GAIN", "ALC_BK_GAIN", "STP_V_C", "DMIX_ABST"
};
static const char * const rt1011_tdm_l_ch_data_select[] = {
"Slot0", "Slot1", "Slot2", "Slot3", "Slot4", "Slot5", "Slot6", "Slot7"
};
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_l_dac1_enum, RT1011_TDM1_SET_4, 12,
rt1011_tdm_l_ch_data_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm2_l_dac1_enum, RT1011_TDM2_SET_4, 12,
rt1011_tdm_l_ch_data_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_dat_enum,
RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_loc_enum, RT1011_TDM1_SET_2, 0,
rt1011_tdm_l_ch_data_select);
static const char * const rt1011_adc_data_mode_select[] = {
"Stereo", "Mono"
};
static SOC_ENUM_SINGLE_DECL(rt1011_adc_dout_mode_enum, RT1011_TDM1_SET_1, 12,
rt1011_adc_data_mode_select);
static const char * const rt1011_tdm_adc_data_len_control[] = {
"1CH", "2CH", "3CH", "4CH", "5CH", "6CH", "7CH", "8CH"
};
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_dout_len_enum, RT1011_TDM1_SET_2, 13,
rt1011_tdm_adc_data_len_control);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm2_dout_len_enum, RT1011_TDM2_SET_2, 13,
rt1011_tdm_adc_data_len_control);
static const char * const rt1011_tdm_adc_swap_select[] = {
"L/R", "R/L", "L/L", "R/R"
};
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
rt1011_tdm_adc_swap_select);
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control - The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:35 +08:00
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
rt1011_tdm_adc_swap_select);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
static void rt1011_reset(struct regmap *regmap)
{
regmap_write(regmap, RT1011_RESET, 0);
}
static int rt1011_recv_spk_mode_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
struct rt1011_priv *rt1011 =
snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = rt1011->recv_spk_mode;
return 0;
}
static int rt1011_recv_spk_mode_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
struct rt1011_priv *rt1011 =
snd_soc_component_get_drvdata(component);
if (ucontrol->value.integer.value[0] == rt1011->recv_spk_mode)
return 0;
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
rt1011->recv_spk_mode = ucontrol->value.integer.value[0];
if (rt1011->recv_spk_mode) {
/* 1: recevier mode on */
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_3,
RT1011_REG_GAIN_CLASSD_RI_SPK_MASK,
RT1011_REG_GAIN_CLASSD_RI_410K);
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_1,
RT1011_RECV_MODE_SPK_MASK,
RT1011_RECV_MODE);
} else {
/* 0: speaker mode on */
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_3,
RT1011_REG_GAIN_CLASSD_RI_SPK_MASK,
RT1011_REG_GAIN_CLASSD_RI_72P5K);
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_1,
RT1011_RECV_MODE_SPK_MASK,
RT1011_SPK_MODE);
}
}
return 0;
}
static bool rt1011_validate_bq_drc_coeff(unsigned short reg)
{
if ((reg == RT1011_DAC_SET_1) |
(reg >= RT1011_ADC_SET && reg <= RT1011_ADC_SET_1) |
(reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) |
(reg == RT1011_MIXER_1) |
(reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 &&
reg <= RT1011_POWER_8) |
(reg == RT1011_CLASS_D_POS) | (reg == RT1011_ANALOG_CTRL) |
(reg >= RT1011_SPK_TEMP_PROTECT_0 &&
reg <= RT1011_SPK_TEMP_PROTECT_6) |
(reg >= RT1011_SPK_PRO_DC_DET_5 && reg <= RT1011_BAT_GAIN_1) |
(reg >= RT1011_RT_DRC_CROSS && reg <= RT1011_RT_DRC_POS_8) |
(reg >= RT1011_CROSS_BQ_SET_1 && reg <= RT1011_BQ_10_A2_15_0) |
(reg >= RT1011_SMART_BOOST_TIMING_1 &&
reg <= RT1011_SMART_BOOST_TIMING_36) |
(reg == RT1011_SINE_GEN_REG_1) |
(reg >= RT1011_STP_ALPHA_RECIPROCAL_MSB &&
reg <= RT1011_BQ_6_PARAMS_CHECK_5) |
(reg >= RT1011_BQ_7_PARAMS_CHECK_1 &&
reg <= RT1011_BQ_10_PARAMS_CHECK_5))
return true;
return false;
}
static int rt1011_bq_drc_coeff_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
struct rt1011_priv *rt1011 =
snd_soc_component_get_drvdata(component);
struct rt1011_bq_drc_params *bq_drc_info;
struct rt1011_bq_drc_params *params =
(struct rt1011_bq_drc_params *)ucontrol->value.integer.value;
unsigned int i, mode_idx = 0;
if (strstr(ucontrol->id.name, "AdvanceMode Initial Set"))
mode_idx = RT1011_ADVMODE_INITIAL_SET;
else if (strstr(ucontrol->id.name, "AdvanceMode SEP BQ Coeff"))
mode_idx = RT1011_ADVMODE_SEP_BQ_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode EQ BQ Coeff"))
mode_idx = RT1011_ADVMODE_EQ_BQ_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode BQ UI Coeff"))
mode_idx = RT1011_ADVMODE_BQ_UI_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode SmartBoost Coeff"))
mode_idx = RT1011_ADVMODE_SMARTBOOST_COEFF;
else
return -EINVAL;
pr_info("%s, id.name=%s, mode_idx=%d\n", __func__,
ucontrol->id.name, mode_idx);
bq_drc_info = rt1011->bq_drc_params[mode_idx];
for (i = 0; i < RT1011_BQ_DRC_NUM; i++) {
ASoC: rt1011: fix warning reported by kbuild test robot and minor issue This patch fixes following issues: - warning: this decimal constant is unsigned only in ISO C90 - sparse: incorrect type in assignment - check if value.integer.value is zero for "R0 Load Mode" control Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06 14:22:32 +08:00
params[i].reg = bq_drc_info[i].reg;
params[i].val = bq_drc_info[i].val;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
return 0;
}
static int rt1011_bq_drc_coeff_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
struct rt1011_priv *rt1011 =
snd_soc_component_get_drvdata(component);
struct rt1011_bq_drc_params *bq_drc_info;
struct rt1011_bq_drc_params *params =
(struct rt1011_bq_drc_params *)ucontrol->value.integer.value;
unsigned int i, mode_idx = 0;
if (!component->card->instantiated)
return 0;
if (strstr(ucontrol->id.name, "AdvanceMode Initial Set"))
mode_idx = RT1011_ADVMODE_INITIAL_SET;
else if (strstr(ucontrol->id.name, "AdvanceMode SEP BQ Coeff"))
mode_idx = RT1011_ADVMODE_SEP_BQ_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode EQ BQ Coeff"))
mode_idx = RT1011_ADVMODE_EQ_BQ_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode BQ UI Coeff"))
mode_idx = RT1011_ADVMODE_BQ_UI_COEFF;
else if (strstr(ucontrol->id.name, "AdvanceMode SmartBoost Coeff"))
mode_idx = RT1011_ADVMODE_SMARTBOOST_COEFF;
else
return -EINVAL;
bq_drc_info = rt1011->bq_drc_params[mode_idx];
memset(bq_drc_info, 0,
sizeof(struct rt1011_bq_drc_params) * RT1011_BQ_DRC_NUM);
pr_info("%s, id.name=%s, mode_idx=%d\n", __func__,
ucontrol->id.name, mode_idx);
for (i = 0; i < RT1011_BQ_DRC_NUM; i++) {
ASoC: rt1011: fix warning reported by kbuild test robot and minor issue This patch fixes following issues: - warning: this decimal constant is unsigned only in ISO C90 - sparse: incorrect type in assignment - check if value.integer.value is zero for "R0 Load Mode" control Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06 14:22:32 +08:00
bq_drc_info[i].reg = params[i].reg;
bq_drc_info[i].val = params[i].val;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
for (i = 0; i < RT1011_BQ_DRC_NUM; i++) {
if (bq_drc_info[i].reg == 0)
break;
else if (rt1011_validate_bq_drc_coeff(bq_drc_info[i].reg)) {
snd_soc_component_write(component, bq_drc_info[i].reg,
bq_drc_info[i].val);
}
}
return 0;
}
static int rt1011_bq_drc_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 128;
uinfo->value.integer.max = 0x17ffffff;
return 0;
}
#define RT1011_BQ_DRC(xname) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = rt1011_bq_drc_info, \
.get = rt1011_bq_drc_coeff_get, \
.put = rt1011_bq_drc_coeff_put \
}
static int rt1011_r0_cali_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:59 +08:00
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = rt1011->cali_done;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
return 0;
}
static int rt1011_r0_cali_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
if (!component->card->instantiated)
return 0;
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:59 +08:00
rt1011->cali_done = 0;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF &&
ucontrol->value.integer.value[0])
rt1011_calibrate(rt1011, 1);
return 0;
}
static int rt1011_r0_load(struct rt1011_priv *rt1011)
{
if (!rt1011->r0_reg)
return -EINVAL;
/* write R0 to register */
regmap_write(rt1011->regmap, RT1011_INIT_RECIPROCAL_REG_24_16,
((rt1011->r0_reg>>16) & 0x1ff));
regmap_write(rt1011->regmap, RT1011_INIT_RECIPROCAL_REG_15_0,
(rt1011->r0_reg & 0xffff));
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_4, 0x4080);
return 0;
}
static int rt1011_r0_load_mode_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = rt1011->r0_reg;
return 0;
}
static int rt1011_r0_load_mode_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
struct device *dev;
unsigned int r0_integer, r0_factor, format;
if (ucontrol->value.integer.value[0] == rt1011->r0_reg)
return 0;
if (!component->card->instantiated)
return 0;
ASoC: rt1011: fix warning reported by kbuild test robot and minor issue This patch fixes following issues: - warning: this decimal constant is unsigned only in ISO C90 - sparse: incorrect type in assignment - check if value.integer.value is zero for "R0 Load Mode" control Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06 14:22:32 +08:00
if (ucontrol->value.integer.value[0] == 0)
return -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
dev = regmap_get_device(rt1011->regmap);
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
rt1011->r0_reg = ucontrol->value.integer.value[0];
ASoC: rt1011: Mark format integer literals as unsigned Clang warns: sound/soc/codecs/rt1011.c:1291:12: warning: integer literal is too large to be represented in type 'long', interpreting as 'unsigned long' per C89; this literal will have type 'long long' in C99 onwards [-Wc99-compat] format = 2147483648; /* 2^24 * 128 */ ^ sound/soc/codecs/rt1011.c:2123:13: warning: integer literal is too large to be represented in type 'long', interpreting as 'unsigned long' per C89; this literal will have type 'long long' in C99 onwards [-Wc99-compat] format = 2147483648; /* 2^24 * 128 */ ^ 2 warnings generated. Mark the integer literals as unsigned explicitly so that if the kernel does ever bump the C standard it uses, the behavior is consitent. Fixes: d6e65bb7ff0d ("ASoC: rt1011: Add RT1011 amplifier driver") Link: https://github.com/ClangBuiltLinux/linux/issues/506 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06 13:12:27 +08:00
format = 2147483648U; /* 2^24 * 128 */
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
r0_integer = format / rt1011->r0_reg / 128;
r0_factor = ((format / rt1011->r0_reg * 100) / 128)
- (r0_integer * 100);
dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, rt1011->r0_reg);
if (rt1011->r0_reg)
rt1011_r0_load(rt1011);
}
return 0;
}
static int rt1011_r0_load_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.max = 0x1ffffff;
return 0;
}
#define RT1011_R0_LOAD(xname) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = rt1011_r0_load_info, \
.get = rt1011_r0_load_mode_get, \
.put = rt1011_r0_load_mode_put \
}
static const struct snd_kcontrol_new rt1011_snd_controls[] = {
/* I2S Data In Selection */
SOC_ENUM("DIN Source", rt1011_din_source_enum),
/* TDM Data In Selection */
SOC_ENUM("TDM1 DIN Source", rt1011_tdm1_l_dac1_enum),
SOC_ENUM("TDM2 DIN Source", rt1011_tdm2_l_dac1_enum),
/* TDM1 Data Out Selection */
SOC_ENUM("TDM1 DOUT Source", rt1011_tdm1_adc1_dat_enum),
SOC_ENUM("TDM1 DOUT Location", rt1011_tdm1_adc1_loc_enum),
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control - The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:35 +08:00
SOC_ENUM("TDM1 ADC1DAT Swap Select", rt1011_tdm_adc1_1_enum),
SOC_ENUM("TDM1 ADC2DAT Swap Select", rt1011_tdm_adc2_1_enum),
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
/* Data Out Mode */
SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum),
SOC_ENUM("TDM1 DOUT Length", rt1011_tdm1_dout_len_enum),
SOC_ENUM("TDM2 DOUT Length", rt1011_tdm2_dout_len_enum),
/* Speaker/Receiver Mode */
SOC_SINGLE_EXT("RECV SPK Mode", SND_SOC_NOPM, 0, 1, 0,
rt1011_recv_spk_mode_get, rt1011_recv_spk_mode_put),
/* BiQuad/DRC/SmartBoost Settings */
RT1011_BQ_DRC("AdvanceMode Initial Set"),
RT1011_BQ_DRC("AdvanceMode SEP BQ Coeff"),
RT1011_BQ_DRC("AdvanceMode EQ BQ Coeff"),
RT1011_BQ_DRC("AdvanceMode BQ UI Coeff"),
RT1011_BQ_DRC("AdvanceMode SmartBoost Coeff"),
/* R0 */
SOC_SINGLE_EXT("R0 Calibration", SND_SOC_NOPM, 0, 1, 0,
rt1011_r0_cali_get, rt1011_r0_cali_put),
RT1011_R0_LOAD("R0 Load Mode"),
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control - The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:35 +08:00
/* R0 temperature */
SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP,
2, 255, 0),
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
};
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink)
{
struct snd_soc_component *component =
snd_soc_dapm_to_component(source->dapm);
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
if (rt1011->sysclk_src == RT1011_FS_SYS_PRE_S_PLL1)
return 1;
else
return 0;
}
static int rt1011_dac_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_component *component =
snd_soc_dapm_to_component(w->dapm);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
snd_soc_component_update_bits(component,
RT1011_SPK_TEMP_PROTECT_0,
RT1011_STP_EN_MASK | RT1011_STP_RS_CLB_EN_MASK,
RT1011_STP_EN | RT1011_STP_RS_CLB_EN);
snd_soc_component_update_bits(component, RT1011_POWER_9,
RT1011_POW_MNL_SDB_MASK, RT1011_POW_MNL_SDB);
msleep(50);
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_1,
RT1011_DRIVER_READY_SPK, RT1011_DRIVER_READY_SPK);
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_component_update_bits(component, RT1011_POWER_9,
RT1011_POW_MNL_SDB_MASK, 0);
snd_soc_component_update_bits(component,
RT1011_SPK_TEMP_PROTECT_0,
RT1011_STP_EN_MASK | RT1011_STP_RS_CLB_EN_MASK, 0);
msleep(200);
snd_soc_component_update_bits(component,
RT1011_CLASSD_INTERNAL_SET_1,
RT1011_DRIVER_READY_SPK, 0);
break;
default:
return 0;
}
return 0;
}
static const struct snd_soc_dapm_widget rt1011_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("LDO2", RT1011_POWER_1,
RT1011_POW_LDO2_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ISENSE SPK", RT1011_POWER_1,
RT1011_POW_ISENSE_SPK_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("VSENSE SPK", RT1011_POWER_1,
RT1011_POW_VSENSE_SPK_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("PLL", RT1011_POWER_2,
RT1011_PLLEN_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("BG", RT1011_POWER_2,
RT1011_POW_BG_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("BG MBIAS", RT1011_POWER_2,
RT1011_POW_BG_MBIAS_LV_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DET VBAT", RT1011_POWER_3,
RT1011_POW_DET_VBAT_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MBIAS", RT1011_POWER_3,
RT1011_POW_MBIAS_LV_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC I", RT1011_POWER_3,
RT1011_POW_ADC_I_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC V", RT1011_POWER_3,
RT1011_POW_ADC_V_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC T", RT1011_POWER_3,
RT1011_POW_ADC_T_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DITHER ADC T", RT1011_POWER_3,
RT1011_POWD_ADC_T_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MIX I", RT1011_POWER_3,
RT1011_POW_MIX_I_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MIX V", RT1011_POWER_3,
RT1011_POW_MIX_V_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("SUM I", RT1011_POWER_3,
RT1011_POW_SUM_I_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("SUM V", RT1011_POWER_3,
RT1011_POW_SUM_V_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MIX T", RT1011_POWER_3,
RT1011_POW_MIX_T_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("VREF", RT1011_POWER_3,
RT1011_POW_VREF_LV_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("BOOST SWR", RT1011_POWER_4,
RT1011_POW_EN_SWR_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("BGOK SWR", RT1011_POWER_4,
RT1011_POW_EN_PASS_BGOK_SWR_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("VPOK SWR", RT1011_POWER_4,
RT1011_POW_EN_PASS_VPOK_SWR_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("TEMP REG", RT1011_A_TEMP_SEN,
RT1011_POW_TEMP_REG_BIT, 0, NULL, 0),
/* Audio Interface */
SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
/* Digital Interface */
SND_SOC_DAPM_SUPPLY("DAC Power", RT1011_POWER_1,
RT1011_POW_DAC_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("CLK12M", RT1011_POWER_1,
RT1011_POW_CLK12M_BIT, 0, NULL, 0),
SND_SOC_DAPM_DAC_E("DAC", NULL, RT1011_DAC_SET_3,
RT1011_DA_MUTE_EN_SFT, 1, rt1011_dac_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
/* Output Lines */
SND_SOC_DAPM_OUTPUT("SPO"),
};
static const struct snd_soc_dapm_route rt1011_dapm_routes[] = {
{ "DAC", NULL, "AIF1RX" },
{ "DAC", NULL, "DAC Power" },
{ "DAC", NULL, "LDO2" },
{ "DAC", NULL, "ISENSE SPK" },
{ "DAC", NULL, "VSENSE SPK" },
{ "DAC", NULL, "CLK12M" },
{ "DAC", NULL, "PLL", rt1011_is_sys_clk_from_pll },
{ "DAC", NULL, "BG" },
{ "DAC", NULL, "BG MBIAS" },
{ "DAC", NULL, "BOOST SWR" },
{ "DAC", NULL, "BGOK SWR" },
{ "DAC", NULL, "VPOK SWR" },
{ "DAC", NULL, "DET VBAT" },
{ "DAC", NULL, "MBIAS" },
{ "DAC", NULL, "VREF" },
{ "DAC", NULL, "ADC I" },
{ "DAC", NULL, "ADC V" },
{ "DAC", NULL, "ADC T" },
{ "DAC", NULL, "DITHER ADC T" },
{ "DAC", NULL, "MIX I" },
{ "DAC", NULL, "MIX V" },
{ "DAC", NULL, "SUM I" },
{ "DAC", NULL, "SUM V" },
{ "DAC", NULL, "MIX T" },
{ "DAC", NULL, "TEMP REG" },
{ "SPO", NULL, "DAC" },
};
static int rt1011_get_clk_info(int sclk, int rate)
{
ASoC: rt1011: make array pd static const, makes object smaller Don't populate the array pd on the stack but instead make it static const. Makes the object code smaller by 100 bytes. Before: text data bss dec hex filename 51463 13016 128 64607 fc5f sound/soc/codecs/rt1011.o After: text data bss dec hex filename 51299 13080 128 64507 fbfb sound/soc/codecs/rt1011.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190907073717.21632-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-07 15:37:17 +08:00
int i;
static const int pd[] = {1, 2, 3, 4, 6, 8, 12, 16};
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
if (sclk <= 0 || rate <= 0)
return -EINVAL;
rate = rate << 8;
for (i = 0; i < ARRAY_SIZE(pd); i++)
if (sclk == rate * pd[i])
return i;
return -EINVAL;
}
static int rt1011_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
unsigned int val_len = 0, ch_len = 0, val_clk, mask_clk;
int pre_div, bclk_ms, frame_size;
rt1011->lrck = params_rate(params);
pre_div = rt1011_get_clk_info(rt1011->sysclk, rt1011->lrck);
if (pre_div < 0) {
dev_warn(component->dev, "Force using PLL ");
snd_soc_dai_set_pll(dai, 0, RT1011_PLL1_S_BCLK,
rt1011->lrck * 64, rt1011->lrck * 256);
snd_soc_dai_set_sysclk(dai, RT1011_FS_SYS_PRE_S_PLL1,
rt1011->lrck * 256, SND_SOC_CLOCK_IN);
pre_div = 0;
}
frame_size = snd_soc_params_to_frame_size(params);
if (frame_size < 0) {
dev_err(component->dev, "Unsupported frame size: %d\n",
frame_size);
return -EINVAL;
}
bclk_ms = frame_size > 32;
rt1011->bclk = rt1011->lrck * (32 << bclk_ms);
dev_dbg(component->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
bclk_ms, pre_div, dai->id);
dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n",
rt1011->lrck, pre_div, dai->id);
switch (params_width(params)) {
case 16:
val_len |= RT1011_I2S_TX_DL_16B;
val_len |= RT1011_I2S_RX_DL_16B;
ch_len |= RT1011_I2S_CH_TX_LEN_16B;
ch_len |= RT1011_I2S_CH_RX_LEN_16B;
break;
case 20:
val_len |= RT1011_I2S_TX_DL_20B;
val_len |= RT1011_I2S_RX_DL_20B;
ch_len |= RT1011_I2S_CH_TX_LEN_20B;
ch_len |= RT1011_I2S_CH_RX_LEN_20B;
break;
case 24:
val_len |= RT1011_I2S_TX_DL_24B;
val_len |= RT1011_I2S_RX_DL_24B;
ch_len |= RT1011_I2S_CH_TX_LEN_24B;
ch_len |= RT1011_I2S_CH_RX_LEN_24B;
break;
case 32:
val_len |= RT1011_I2S_TX_DL_32B;
val_len |= RT1011_I2S_RX_DL_32B;
ch_len |= RT1011_I2S_CH_TX_LEN_32B;
ch_len |= RT1011_I2S_CH_RX_LEN_32B;
break;
case 8:
val_len |= RT1011_I2S_TX_DL_8B;
val_len |= RT1011_I2S_RX_DL_8B;
ch_len |= RT1011_I2S_CH_TX_LEN_8B;
ch_len |= RT1011_I2S_CH_RX_LEN_8B;
break;
default:
return -EINVAL;
}
switch (dai->id) {
case RT1011_AIF1:
mask_clk = RT1011_FS_SYS_DIV_MASK;
val_clk = pre_div << RT1011_FS_SYS_DIV_SFT;
snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
RT1011_I2S_TX_DL_MASK | RT1011_I2S_RX_DL_MASK,
val_len);
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1,
RT1011_I2S_CH_TX_LEN_MASK |
RT1011_I2S_CH_RX_LEN_MASK,
ch_len);
break;
default:
dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
return -EINVAL;
}
snd_soc_component_update_bits(component,
RT1011_CLK_2, mask_clk, val_clk);
return 0;
}
static int rt1011_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *component = dai->component;
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(component);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
unsigned int reg_val = 0, reg_bclk_inv = 0;
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
int ret = 0;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
snd_soc_dapm_mutex_lock(dapm);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
reg_val |= RT1011_I2S_TDM_MS_S;
break;
default:
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
reg_bclk_inv |= RT1011_TDM_INV_BCLK;
break;
default:
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
break;
case SND_SOC_DAIFMT_LEFT_J:
reg_val |= RT1011_I2S_TDM_DF_LEFT;
break;
case SND_SOC_DAIFMT_DSP_A:
reg_val |= RT1011_I2S_TDM_DF_PCM_A;
break;
case SND_SOC_DAIFMT_DSP_B:
reg_val |= RT1011_I2S_TDM_DF_PCM_B;
break;
default:
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
switch (dai->id) {
case RT1011_AIF1:
snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
RT1011_I2S_TDM_MS_MASK | RT1011_I2S_TDM_DF_MASK,
reg_val);
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1,
RT1011_TDM_INV_BCLK_MASK, reg_bclk_inv);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_1,
RT1011_TDM_INV_BCLK_MASK, reg_bclk_inv);
break;
default:
dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
snd_soc_dapm_mutex_unlock(dapm);
return ret;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
static int rt1011_set_component_sysclk(struct snd_soc_component *component,
int clk_id, int source, unsigned int freq, int dir)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
unsigned int reg_val = 0;
if (freq == rt1011->sysclk && clk_id == rt1011->sysclk_src)
return 0;
/* disable MCLK detect in default */
snd_soc_component_update_bits(component, RT1011_CLK_DET,
RT1011_EN_MCLK_DET_MASK, 0);
switch (clk_id) {
case RT1011_FS_SYS_PRE_S_MCLK:
reg_val |= RT1011_FS_SYS_PRE_MCLK;
snd_soc_component_update_bits(component, RT1011_CLK_DET,
RT1011_EN_MCLK_DET_MASK, RT1011_EN_MCLK_DET);
break;
case RT1011_FS_SYS_PRE_S_BCLK:
reg_val |= RT1011_FS_SYS_PRE_BCLK;
break;
case RT1011_FS_SYS_PRE_S_PLL1:
reg_val |= RT1011_FS_SYS_PRE_PLL1;
break;
case RT1011_FS_SYS_PRE_S_RCCLK:
reg_val |= RT1011_FS_SYS_PRE_RCCLK;
break;
default:
dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
return -EINVAL;
}
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_FS_SYS_PRE_MASK, reg_val);
rt1011->sysclk = freq;
rt1011->sysclk_src = clk_id;
dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n",
freq, clk_id);
return 0;
}
static int rt1011_set_component_pll(struct snd_soc_component *component,
int pll_id, int source, unsigned int freq_in,
unsigned int freq_out)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
struct rl6231_pll_code pll_code;
int ret;
if (source == rt1011->pll_src && freq_in == rt1011->pll_in &&
freq_out == rt1011->pll_out)
return 0;
if (!freq_in || !freq_out) {
dev_dbg(component->dev, "PLL disabled\n");
rt1011->pll_in = 0;
rt1011->pll_out = 0;
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_FS_SYS_PRE_MASK, RT1011_FS_SYS_PRE_BCLK);
return 0;
}
switch (source) {
case RT1011_PLL2_S_MCLK:
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_PLL2_SRC_MASK, RT1011_PLL2_SRC_MCLK);
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_PLL1_SRC_MASK, RT1011_PLL1_SRC_PLL2);
snd_soc_component_update_bits(component, RT1011_CLK_DET,
RT1011_EN_MCLK_DET_MASK, RT1011_EN_MCLK_DET);
break;
case RT1011_PLL1_S_BCLK:
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_PLL1_SRC_MASK, RT1011_PLL1_SRC_BCLK);
break;
case RT1011_PLL2_S_RCCLK:
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_PLL2_SRC_MASK, RT1011_PLL2_SRC_RCCLK);
snd_soc_component_update_bits(component, RT1011_CLK_2,
RT1011_PLL1_SRC_MASK, RT1011_PLL1_SRC_PLL2);
break;
default:
dev_err(component->dev, "Unknown PLL Source %d\n", source);
return -EINVAL;
}
ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
if (ret < 0) {
dev_err(component->dev, "Unsupport input clock %d\n", freq_in);
return ret;
}
dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
pll_code.n_code, pll_code.k_code);
snd_soc_component_write(component, RT1011_PLL_1,
(pll_code.m_bp ? 0 : pll_code.m_code) << RT1011_PLL1_QM_SFT |
pll_code.m_bp << RT1011_PLL1_BPM_SFT | pll_code.n_code);
snd_soc_component_write(component, RT1011_PLL_2,
pll_code.k_code);
rt1011->pll_in = freq_in;
rt1011->pll_out = freq_out;
rt1011->pll_src = source;
return 0;
}
static int rt1011_set_tdm_slot(struct snd_soc_dai *dai,
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct snd_soc_component *component = dai->component;
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(component);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
unsigned int val = 0, tdm_en = 0;
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
int ret = 0;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
snd_soc_dapm_mutex_lock(dapm);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
if (rx_mask || tx_mask)
tdm_en = RT1011_TDM_I2S_DOCK_EN_1;
switch (slots) {
case 4:
val |= RT1011_I2S_TX_4CH;
val |= RT1011_I2S_RX_4CH;
break;
case 6:
val |= RT1011_I2S_TX_6CH;
val |= RT1011_I2S_RX_6CH;
break;
case 8:
val |= RT1011_I2S_TX_8CH;
val |= RT1011_I2S_RX_8CH;
break;
case 2:
break;
default:
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
switch (slot_width) {
case 20:
val |= RT1011_I2S_CH_TX_LEN_20B;
val |= RT1011_I2S_CH_RX_LEN_20B;
break;
case 24:
val |= RT1011_I2S_CH_TX_LEN_24B;
val |= RT1011_I2S_CH_RX_LEN_24B;
break;
case 32:
val |= RT1011_I2S_CH_TX_LEN_32B;
val |= RT1011_I2S_CH_RX_LEN_32B;
break;
case 16:
break;
default:
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
ret = -EINVAL;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM1_SET_2,
RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_2,
RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en);
snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG,
RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT);
ASoC: rt1011: add mutex protection to set_fmt/set_tdm_slot The calibration process at booting will reset registers and bypass cache to make sure the calibration is done. We add mutex protection to avoid unexpected settings while the registration process and calibration are interleaved. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-26 17:00:52 +08:00
snd_soc_dapm_mutex_unlock(dapm);
return ret;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
}
static int rt1011_probe(struct snd_soc_component *component)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
int i;
rt1011->component = component;
schedule_work(&rt1011->cali_work);
rt1011->bq_drc_params = devm_kcalloc(component->dev,
RT1011_ADVMODE_NUM, sizeof(struct rt1011_bq_drc_params *),
GFP_KERNEL);
if (!rt1011->bq_drc_params)
return -ENOMEM;
for (i = 0; i < RT1011_ADVMODE_NUM; i++) {
rt1011->bq_drc_params[i] = devm_kcalloc(component->dev,
RT1011_BQ_DRC_NUM, sizeof(struct rt1011_bq_drc_params),
GFP_KERNEL);
if (!rt1011->bq_drc_params[i])
return -ENOMEM;
}
return 0;
}
static void rt1011_remove(struct snd_soc_component *component)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
cancel_work_sync(&rt1011->cali_work);
rt1011_reset(rt1011->regmap);
}
#ifdef CONFIG_PM
static int rt1011_suspend(struct snd_soc_component *component)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
regcache_cache_only(rt1011->regmap, true);
regcache_mark_dirty(rt1011->regmap);
return 0;
}
static int rt1011_resume(struct snd_soc_component *component)
{
struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
regcache_cache_only(rt1011->regmap, false);
regcache_sync(rt1011->regmap);
return 0;
}
#else
#define rt1011_suspend NULL
#define rt1011_resume NULL
#endif
static int rt1011_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_OFF:
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_1, 0x0000);
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_2, 0x0000);
snd_soc_component_write(component,
ASoC: rt1011: fix DC calibration offset not applying There are two issues to fix: - DC offset calibration data will be reset after stopping playback. - DC offset calibration data should be applied in the initial setting. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190711082214.8142-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-11 16:22:14 +08:00
RT1011_SYSTEM_RESET_3, 0x0001);
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_1, 0x003f);
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_2, 0x7fd7);
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_3, 0x770f);
break;
default:
break;
}
return 0;
}
#define RT1011_STEREO_RATES SNDRV_PCM_RATE_8000_192000
#define RT1011_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops rt1011_aif_dai_ops = {
.hw_params = rt1011_hw_params,
.set_fmt = rt1011_set_dai_fmt,
.set_tdm_slot = rt1011_set_tdm_slot,
};
static struct snd_soc_dai_driver rt1011_dai[] = {
{
.name = "rt1011-aif",
.playback = {
.stream_name = "AIF1 Playback",
.channels_min = 1,
.channels_max = 2,
.rates = RT1011_STEREO_RATES,
.formats = RT1011_FORMATS,
},
.ops = &rt1011_aif_dai_ops,
},
};
static const struct snd_soc_component_driver soc_component_dev_rt1011 = {
.probe = rt1011_probe,
.remove = rt1011_remove,
.suspend = rt1011_suspend,
.resume = rt1011_resume,
.set_bias_level = rt1011_set_bias_level,
.controls = rt1011_snd_controls,
.num_controls = ARRAY_SIZE(rt1011_snd_controls),
.dapm_widgets = rt1011_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(rt1011_dapm_widgets),
.dapm_routes = rt1011_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(rt1011_dapm_routes),
.set_sysclk = rt1011_set_component_sysclk,
.set_pll = rt1011_set_component_pll,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
};
static const struct regmap_config rt1011_regmap = {
.reg_bits = 16,
.val_bits = 16,
.max_register = RT1011_MAX_REG + 1,
.volatile_reg = rt1011_volatile_register,
.readable_reg = rt1011_readable_register,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = rt1011_reg,
.num_reg_defaults = ARRAY_SIZE(rt1011_reg),
.use_single_read = true,
.use_single_write = true,
};
#if defined(CONFIG_OF)
static const struct of_device_id rt1011_of_match[] = {
{ .compatible = "realtek,rt1011", },
{},
};
MODULE_DEVICE_TABLE(of, rt1011_of_match);
#endif
#ifdef CONFIG_ACPI
static struct acpi_device_id rt1011_acpi_match[] = {
{"10EC1011", 0,},
{},
};
MODULE_DEVICE_TABLE(acpi, rt1011_acpi_match);
#endif
static const struct i2c_device_id rt1011_i2c_id[] = {
{ "rt1011", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rt1011_i2c_id);
static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
{
unsigned int value, count = 0, r0[3];
unsigned int chk_cnt = 50; /* DONT change this */
unsigned int dc_offset;
unsigned int r0_integer, r0_factor, format;
struct device *dev = regmap_get_device(rt1011->regmap);
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(rt1011->component);
int ret = 0;
snd_soc_dapm_mutex_lock(dapm);
regcache_cache_bypass(rt1011->regmap, true);
regmap_write(rt1011->regmap, RT1011_RESET, 0x0000);
regmap_write(rt1011->regmap, RT1011_SYSTEM_RESET_3, 0x740f);
regmap_write(rt1011->regmap, RT1011_SYSTEM_RESET_3, 0x770f);
/* RC clock */
regmap_write(rt1011->regmap, RT1011_CLK_2, 0x9400);
regmap_write(rt1011->regmap, RT1011_PLL_1, 0x0800);
regmap_write(rt1011->regmap, RT1011_PLL_2, 0x0020);
regmap_write(rt1011->regmap, RT1011_CLK_DET, 0x0800);
/* ADC/DAC setting */
regmap_write(rt1011->regmap, RT1011_ADC_SET_5, 0x0a20);
regmap_write(rt1011->regmap, RT1011_DAC_SET_2, 0xe232);
regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x2925);
regmap_write(rt1011->regmap, RT1011_ADC_SET_4, 0xc000);
/* DC detection */
regmap_write(rt1011->regmap, RT1011_SPK_PRO_DC_DET_1, 0xb00c);
regmap_write(rt1011->regmap, RT1011_SPK_PRO_DC_DET_2, 0xcccc);
/* Power */
regmap_write(rt1011->regmap, RT1011_POWER_1, 0xe0e0);
regmap_write(rt1011->regmap, RT1011_POWER_3, 0x5003);
regmap_write(rt1011->regmap, RT1011_POWER_9, 0xa860);
regmap_write(rt1011->regmap, RT1011_DAC_SET_2, 0xa032);
/* POW_PLL / POW_BG / POW_BG_MBIAS_LV / POW_V/I */
regmap_write(rt1011->regmap, RT1011_POWER_2, 0x0007);
regmap_write(rt1011->regmap, RT1011_POWER_3, 0x5ff7);
regmap_write(rt1011->regmap, RT1011_A_TEMP_SEN, 0x7f44);
regmap_write(rt1011->regmap, RT1011_A_TIMING_1, 0x4054);
regmap_write(rt1011->regmap, RT1011_BAT_GAIN_1, 0x309c);
/* DC offset from EFUSE */
regmap_write(rt1011->regmap, RT1011_DC_CALIB_CLASSD_3, 0xcb00);
regmap_write(rt1011->regmap, RT1011_BOOST_CON_1, 0xe080);
regmap_write(rt1011->regmap, RT1011_POWER_4, 0x16f2);
regmap_write(rt1011->regmap, RT1011_POWER_6, 0x36ad);
/* mixer */
regmap_write(rt1011->regmap, RT1011_MIXER_1, 0x3f1d);
/* EFUSE read */
regmap_write(rt1011->regmap, RT1011_EFUSE_CONTROL_1, 0x0d0a);
msleep(30);
regmap_read(rt1011->regmap, RT1011_EFUSE_ADC_OFFSET_18_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_ADC_OFFSET_15_0, &value);
dc_offset |= (value & 0xffff);
dev_info(dev, "ADC offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_15_0, &value);
dc_offset |= (value & 0xffff);
dev_info(dev, "Gain0 offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_15_0, &value);
dc_offset |= (value & 0xffff);
dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
if (cali_flag) {
/* Class D on */
regmap_write(rt1011->regmap, RT1011_CLASS_D_POS, 0x010e);
regmap_write(rt1011->regmap,
RT1011_CLASSD_INTERNAL_SET_1, 0x1701);
/* STP enable */
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_0, 0x8000);
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_7, 0xf000);
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_4, 0x4040);
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_0, 0xc000);
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_6, 0x07c2);
r0[0] = r0[1] = r0[2] = count = 0;
while (count < chk_cnt) {
msleep(100);
regmap_read(rt1011->regmap,
RT1011_INIT_RECIPROCAL_SYN_24_16, &value);
r0[count%3] = value << 16;
regmap_read(rt1011->regmap,
RT1011_INIT_RECIPROCAL_SYN_15_0, &value);
r0[count%3] |= value;
if (r0[count%3] == 0)
continue;
count++;
if (r0[0] == r0[1] && r0[1] == r0[2])
break;
}
if (count > chk_cnt) {
dev_err(dev, "Calibrate R0 Failure\n");
ret = -EAGAIN;
} else {
ASoC: rt1011: Mark format integer literals as unsigned Clang warns: sound/soc/codecs/rt1011.c:1291:12: warning: integer literal is too large to be represented in type 'long', interpreting as 'unsigned long' per C89; this literal will have type 'long long' in C99 onwards [-Wc99-compat] format = 2147483648; /* 2^24 * 128 */ ^ sound/soc/codecs/rt1011.c:2123:13: warning: integer literal is too large to be represented in type 'long', interpreting as 'unsigned long' per C89; this literal will have type 'long long' in C99 onwards [-Wc99-compat] format = 2147483648; /* 2^24 * 128 */ ^ 2 warnings generated. Mark the integer literals as unsigned explicitly so that if the kernel does ever bump the C standard it uses, the behavior is consitent. Fixes: d6e65bb7ff0d ("ASoC: rt1011: Add RT1011 amplifier driver") Link: https://github.com/ClangBuiltLinux/linux/issues/506 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-06 13:12:27 +08:00
format = 2147483648U; /* 2^24 * 128 */
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
r0_integer = format / r0[0] / 128;
r0_factor = ((format / r0[0] * 100) / 128)
- (r0_integer * 100);
rt1011->r0_reg = r0[0];
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:59 +08:00
rt1011->cali_done = 1;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, r0[0]);
}
}
/* depop */
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_0, 0x0000);
msleep(400);
regmap_write(rt1011->regmap, RT1011_POWER_9, 0xa840);
regmap_write(rt1011->regmap, RT1011_SPK_TEMP_PROTECT_6, 0x0702);
regmap_write(rt1011->regmap, RT1011_MIXER_1, 0xffdd);
regmap_write(rt1011->regmap, RT1011_CLASSD_INTERNAL_SET_1, 0x0701);
regmap_write(rt1011->regmap, RT1011_DAC_SET_3, 0xe004);
regmap_write(rt1011->regmap, RT1011_A_TEMP_SEN, 0x7f40);
regmap_write(rt1011->regmap, RT1011_POWER_1, 0x0000);
regmap_write(rt1011->regmap, RT1011_POWER_2, 0x0000);
regmap_write(rt1011->regmap, RT1011_POWER_3, 0x0002);
regmap_write(rt1011->regmap, RT1011_POWER_4, 0x00f2);
regmap_write(rt1011->regmap, RT1011_RESET, 0x0000);
if (cali_flag) {
if (count <= chk_cnt) {
regmap_write(rt1011->regmap,
RT1011_INIT_RECIPROCAL_REG_24_16,
((r0[0]>>16) & 0x1ff));
regmap_write(rt1011->regmap,
RT1011_INIT_RECIPROCAL_REG_15_0,
(r0[0] & 0xffff));
regmap_write(rt1011->regmap,
RT1011_SPK_TEMP_PROTECT_4, 0x4080);
}
}
regcache_cache_bypass(rt1011->regmap, false);
regcache_mark_dirty(rt1011->regmap);
regcache_sync(rt1011->regmap);
snd_soc_dapm_mutex_unlock(dapm);
return ret;
}
static void rt1011_calibration_work(struct work_struct *work)
{
struct rt1011_priv *rt1011 =
container_of(work, struct rt1011_priv, cali_work);
struct snd_soc_component *component = rt1011->component;
rt1011_calibrate(rt1011, 1);
ASoC: rt1011: Add a flag for the R0 calibration test The factory test needs to know whether the calibration completed. This flag helps to confirm the calibration completed or not. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20190806091459.14382-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-06 17:14:59 +08:00
/*
* This flag should reset after booting.
* The factory test will do calibration again and use this flag to check
* whether the calibration completed
*/
rt1011->cali_done = 0;
ASoC: rt1011: Add RT1011 amplifier driver This is the initial amplifier driver for rt1011. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-28 12:30:17 +08:00
/* initial */
rt1011_reg_init(component);
}
static int rt1011_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct rt1011_priv *rt1011;
int ret;
unsigned int val;
rt1011 = devm_kzalloc(&i2c->dev, sizeof(struct rt1011_priv),
GFP_KERNEL);
if (rt1011 == NULL)
return -ENOMEM;
i2c_set_clientdata(i2c, rt1011);
rt1011->regmap = devm_regmap_init_i2c(i2c, &rt1011_regmap);
if (IS_ERR(rt1011->regmap)) {
ret = PTR_ERR(rt1011->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
regmap_read(rt1011->regmap, RT1011_DEVICE_ID, &val);
if (val != RT1011_DEVICE_ID_NUM) {
dev_err(&i2c->dev,
"Device with ID register %x is not rt1011\n", val);
return -ENODEV;
}
INIT_WORK(&rt1011->cali_work, rt1011_calibration_work);
return devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_rt1011,
rt1011_dai, ARRAY_SIZE(rt1011_dai));
}
static void rt1011_i2c_shutdown(struct i2c_client *client)
{
struct rt1011_priv *rt1011 = i2c_get_clientdata(client);
rt1011_reset(rt1011->regmap);
}
static struct i2c_driver rt1011_i2c_driver = {
.driver = {
.name = "rt1011",
.of_match_table = of_match_ptr(rt1011_of_match),
.acpi_match_table = ACPI_PTR(rt1011_acpi_match)
},
.probe = rt1011_i2c_probe,
.shutdown = rt1011_i2c_shutdown,
.id_table = rt1011_i2c_id,
};
module_i2c_driver(rt1011_i2c_driver);
MODULE_DESCRIPTION("ASoC RT1011 amplifier driver");
MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
MODULE_LICENSE("GPL");