UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/ipv6/ping.c

277 lines
7.2 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:01 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* "Ping" sockets
*
* Based on ipv4/ping.c code.
*
* Authors: Lorenzo Colitti (IPv6 support)
* Vasiliy Kulikov / Openwall (IPv4 implementation, for Linux 2.6),
* Pavel Kankovsky (IPv4 implementation, for Linux 2.4.32)
*/
#include <net/addrconf.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
#include <net/protocol.h>
#include <net/udp.h>
#include <net/transp_v6.h>
ipv{4,6}/ping: simplify proc file creation Remove the pointless ping_seq_afinfo indirection and make the code look like most other protocols. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11 02:04:20 +08:00
#include <linux/proc_fs.h>
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
#include <net/ping.h>
tkernel: sync code to the same with tk4 pub/lts/0017-kabi Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue and wujing. Partners can submit pull requests to this branch, and we can pick the commits to tk4 pub/lts/0017-kabi easly. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
static void ping_v6_destroy(struct sock *sk)
{
inet6_destroy_sock(sk);
}
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23 07:46:12 +08:00
static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
int *addr_len)
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
{
return -EAFNOSUPPORT;
}
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-20 10:43:08 +08:00
static void dummy_ip6_datagram_recv_ctl(struct sock *sk, struct msghdr *msg,
net: ping_check_bind_addr() etc. can be static net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static? net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static? net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static? net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static? net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static? net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static? net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static? net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static? net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 21:04:16 +08:00
struct sk_buff *skb)
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
{
}
net: ping_check_bind_addr() etc. can be static net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static? net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static? net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static? net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static? net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static? net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static? net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static? net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static? net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 21:04:16 +08:00
static int dummy_icmpv6_err_convert(u8 type, u8 code, int *err)
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
{
return -EAFNOSUPPORT;
}
net: ping_check_bind_addr() etc. can be static net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static? net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static? net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static? net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static? net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static? net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static? net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static? net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static? net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 21:04:16 +08:00
static void dummy_ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err,
__be16 port, u32 info, u8 *payload) {}
static int dummy_ipv6_chk_addr(struct net *net, const struct in6_addr *addr,
const struct net_device *dev, int strict)
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
{
return 0;
}
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
static int ping_v6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
struct icmp6hdr user_icmph;
int addr_type;
struct in6_addr *daddr;
net: ipv6: Fix ping to link-local addresses. ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13 00:13:38 +08:00
int oif = 0;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
struct flowi6 fl6;
int err;
struct dst_entry *dst;
struct rt6_info *rt;
struct pingfakehdr pfh;
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 12:40:07 +08:00
struct ipcm6_cookie ipc6;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
pr_debug("ping_v6_sendmsg(sk=%p,sk->num=%u)\n", inet, inet->inet_num);
err = ping_common_sendmsg(AF_INET6, msg, len, &user_icmph,
sizeof(user_icmph));
if (err)
return err;
if (msg->msg_name) {
net: add build-time checks for msg->msg_name size This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18 05:53:15 +08:00
DECLARE_SOCKADDR(struct sockaddr_in6 *, u, msg->msg_name);
net: ping: Return EAFNOSUPPORT when appropriate. 1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 22:16:16 +08:00
if (msg->msg_namelen < sizeof(*u))
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
return -EINVAL;
net: ping: Return EAFNOSUPPORT when appropriate. 1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 22:16:16 +08:00
if (u->sin6_family != AF_INET6) {
return -EAFNOSUPPORT;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
}
daddr = &(u->sin6_addr);
net: ipv6: Fix ping to link-local addresses. ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13 00:13:38 +08:00
if (__ipv6_addr_needs_scope_id(ipv6_addr_type(daddr)))
oif = u->sin6_scope_id;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
} else {
if (sk->sk_state != TCP_ESTABLISHED)
return -EDESTADDRREQ;
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-04 06:42:29 +08:00
daddr = &sk->sk_v6_daddr;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
}
net: ipv6: Fix ping to link-local addresses. ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13 00:13:38 +08:00
if (!oif)
oif = sk->sk_bound_dev_if;
if (!oif)
oif = np->sticky_pktinfo.ipi6_ifindex;
if (!oif && ipv6_addr_is_multicast(daddr))
oif = np->mcast_oif;
else if (!oif)
oif = np->ucast_oif;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
addr_type = ipv6_addr_type(daddr);
net: ipv6: Fix ping to link-local addresses. ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13 00:13:38 +08:00
if ((__ipv6_addr_needs_scope_id(addr_type) && !oif) ||
(addr_type & IPV6_ADDR_MAPPED) ||
(oif && sk->sk_bound_dev_if && oif != sk->sk_bound_dev_if))
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
return -EINVAL;
/* TODO: use ip6_datagram_send_ctl to get options from cmsg */
memset(&fl6, 0, sizeof(fl6));
fl6.flowi6_proto = IPPROTO_ICMPV6;
fl6.saddr = np->saddr;
fl6.daddr = *daddr;
net: ipv6: Fix ping to link-local addresses. ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/ Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13 00:13:38 +08:00
fl6.flowi6_oif = oif;
net: ipv6: ping: Use socket mark in routing lookup Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27 12:38:26 +08:00
fl6.flowi6_mark = sk->sk_mark;
net: inet: Support UID-based routing in IP protocols. - Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 01:23:43 +08:00
fl6.flowi6_uid = sk->sk_uid;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
fl6.fl6_icmp_type = user_icmph.icmp6_type;
fl6.fl6_icmp_code = user_icmph.icmp6_code;
security_sk_classify_flow(sk, flowi6_to_flowi(&fl6));
ipv6: ipcm6_cookie initializer Initialize the cookie in one location to reduce code duplication and avoid bugs from inconsistent initialization, such as that fixed in commit 9887cba19978 ("ip: limit use of gso_size to udp"). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06 22:12:55 +08:00
ipcm6_init_sk(&ipc6, np);
ipv6: use TOS marks from sockets for routing decision In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-12 02:08:19 +08:00
fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow() Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update the cache only if ip6_sk_dst_check() returns NULL and a socket is connected. The function is used as before, the new behavior for UDP sockets in udpv6_sendmsg() will be enabled in the next patch. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-03 20:00:08 +08:00
dst = ip6_sk_dst_lookup_flow(sk, &fl6, daddr, false);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
if (IS_ERR(dst))
return PTR_ERR(dst);
rt = (struct rt6_info *) dst;
if (!fl6.flowi6_oif && ipv6_addr_is_multicast(&fl6.daddr))
fl6.flowi6_oif = np->mcast_oif;
else if (!fl6.flowi6_oif)
fl6.flowi6_oif = np->ucast_oif;
pfh.icmph.type = user_icmph.icmp6_type;
pfh.icmph.code = user_icmph.icmp6_code;
pfh.icmph.checksum = 0;
pfh.icmph.un.echo.id = inet->inet_sport;
pfh.icmph.un.echo.sequence = user_icmph.icmp6_sequence;
ip: stash a pointer to msghdr in struct ping_fakehdr ... instead of storing its ->mgs_iter.iov there Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-28 09:34:16 +08:00
pfh.msg = msg;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
pfh.wcheck = 0;
pfh.family = AF_INET6;
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 12:40:07 +08:00
ipc6.hlimit = ip6_sk_dst_hoplimit(np, &fl6, dst);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
net: ipv6: add missing lock in ping_v6_sendmsg Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 23:52:49 +08:00
lock_sock(sk);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
err = ip6_append_data(sk, ping_getfrag, &pfh, len,
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03 12:40:07 +08:00
0, &ipc6, &fl6, rt,
ipv6: fold sockcm_cookie into ipcm6_cookie ipcm_cookie includes sockcm_cookie. Do the same for ipcm6_cookie. This reduces the number of arguments that need to be passed around, applies ipcm6_init to all cookie fields at once and reduces code differentiation between ipv4 and ipv6. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06 22:12:57 +08:00
MSG_DONTWAIT);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
if (err) {
ipv6: some ipv6 statistic counters failed to disable bh After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01 02:14:10 +08:00
ICMP6_INC_STATS(sock_net(sk), rt->rt6i_idev,
ICMP6_MIB_OUTERRORS);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
ip6_flush_pending_frames(sk);
} else {
net/ipv6: Convert icmpv6_push_pending_frames to void commit cc71b7b07119 ("net/ipv6: remove unused err variable on icmpv6_push_pending_frames") exposed icmpv6_push_pending_frames return value not being used. Remove now unnecessary int err declarations and uses. Miscellanea: o Remove unnecessary goto and out: labels o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06 14:46:14 +08:00
icmpv6_push_pending_frames(sk, &fl6,
(struct icmp6hdr *)&pfh.icmph, len);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
}
net: ipv6: add missing lock in ping_v6_sendmsg Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 23:52:49 +08:00
release_sock(sk);
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
ipv6: release dst in ping_v6_sendmsg Neither the failure or success paths of ping_v6_sendmsg release the dst it acquires. This leads to a flood of warnings from "net/core/dst.c:288 dst_release" on older kernels that don't have 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported. That patch optimistically hoped this had been fixed post 3.10, but it seems at least one case wasn't, where I've seen this triggered a lot from machines doing unprivileged icmp sockets. Cc: Martin Lau <kafai@fb.com> Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-03 02:39:50 +08:00
dst_release(dst);
net: ipv6: fix wrong ping_v6_sendmsg return value ping_v6_sendmsg currently returns 0 on success. It should return the number of bytes written instead. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 23:12:40 +08:00
if (err)
return err;
return len;
net: ipv6: Add IPv6 support to the ping socket. This adds the ability to send ICMPv6 echo requests without a raw socket. The equivalent ability for ICMPv4 was added in 2011. Instead of having separate code paths for IPv4 and IPv6, make most of the code in net/ipv4/ping.c dual-stack and only add a few IPv6-specific bits (like the protocol definition) to a new net/ipv6/ping.c. Hopefully this will reduce divergence and/or duplication of bugs in the future. Caveats: - Setting options via ancillary data (e.g., using IPV6_PKTINFO to specify the outgoing interface) is not yet supported. - There are no separate security settings for IPv4 and IPv6; everything is controlled by /proc/net/ipv4/ping_group_range. - The proc interface does not yet display IPv6 ping sockets properly. Tested with a patched copy of ping6 and using raw socket calls. Compiles and works with all of CONFIG_IPV6={n,m,y}. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 04:17:31 +08:00
}
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
struct proto pingv6_prot = {
.name = "PINGv6",
.owner = THIS_MODULE,
.init = ping_init_sock,
.close = ping_close,
tkernel: sync code to the same with tk4 pub/lts/0017-kabi Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue and wujing. Partners can submit pull requests to this branch, and we can pick the commits to tk4 pub/lts/0017-kabi easly. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
.destroy = ping_v6_destroy,
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
.connect = ip6_datagram_connect_v6_only,
udp: must lock the socket in udp_disconnect() Baozeng Ding reported KASAN traces showing uses after free in udp_lib_get_port() and other related UDP functions. A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash. I could write a reproducer with two threads doing : static int sock_fd; static void *thr1(void *arg) { for (;;) { connect(sock_fd, (const struct sockaddr *)arg, sizeof(struct sockaddr_in)); } } static void *thr2(void *arg) { struct sockaddr_in unspec; for (;;) { memset(&unspec, 0, sizeof(unspec)); connect(sock_fd, (const struct sockaddr *)&unspec, sizeof(unspec)); } } Problem is that udp_disconnect() could run without holding socket lock, and this was causing list corruptions. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21 00:39:40 +08:00
.disconnect = __udp_disconnect,
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
.setsockopt = ipv6_setsockopt,
.getsockopt = ipv6_getsockopt,
.sendmsg = ping_v6_sendmsg,
.recvmsg = ping_recvmsg,
.bind = ping_bind,
.backlog_rcv = ping_queue_rcv_skb,
.hash = ping_hash,
.unhash = ping_unhash,
.get_port = ping_get_port,
tkernel: sync code to the same with tk4 pub/lts/0017-kabi Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue and wujing. Partners can submit pull requests to this branch, and we can pick the commits to tk4 pub/lts/0017-kabi easly. Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
.put_port = ping_unhash,
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
.obj_size = sizeof(struct raw6_sock),
};
EXPORT_SYMBOL_GPL(pingv6_prot);
static struct inet_protosw pingv6_protosw = {
.type = SOCK_DGRAM,
.protocol = IPPROTO_ICMPV6,
.prot = &pingv6_prot,
net: ping: do not abuse udp_poll() Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Tested-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 00:29:25 +08:00
.ops = &inet6_sockraw_ops,
net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 17:59:51 +08:00
.flags = INET_PROTOSW_REUSE,
};
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
#ifdef CONFIG_PROC_FS
static void *ping_v6_seq_start(struct seq_file *seq, loff_t *pos)
{
return ping_seq_start(seq, pos, AF_INET6);
}
net: ping_check_bind_addr() etc. can be static net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static? net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static? net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static? net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static? net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static? net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static? net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static? net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static? net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 21:04:16 +08:00
static int ping_v6_seq_show(struct seq_file *seq, void *v)
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
{
if (v == SEQ_START_TOKEN) {
seq_puts(seq, IPV6_SEQ_DGRAM_HEADER);
} else {
int bucket = ((struct ping_iter_state *) seq->private)->bucket;
struct inet_sock *inet = inet_sk(v);
__u16 srcp = ntohs(inet->inet_sport);
__u16 destp = ntohs(inet->inet_dport);
ip6_dgram_sock_seq_show(seq, v, srcp, destp, bucket);
}
return 0;
}
ipv{4,6}/ping: simplify proc file creation Remove the pointless ping_seq_afinfo indirection and make the code look like most other protocols. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11 02:04:20 +08:00
static const struct seq_operations ping_v6_seq_ops = {
.start = ping_v6_seq_start,
.show = ping_v6_seq_show,
.next = ping_seq_next,
.stop = ping_seq_stop,
};
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
static int __net_init ping_v6_proc_init_net(struct net *net)
{
proc: introduce proc_create_net{,_data} Variants of proc_create{,_data} that directly take a struct seq_operations and deal with network namespaces in ->open and ->release. All callers of proc_create + seq_open_net converted over, and seq_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11 01:42:55 +08:00
if (!proc_create_net("icmp6", 0444, net->proc_net, &ping_v6_seq_ops,
sizeof(struct ping_iter_state)))
ipv{4,6}/ping: simplify proc file creation Remove the pointless ping_seq_afinfo indirection and make the code look like most other protocols. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11 02:04:20 +08:00
return -ENOMEM;
return 0;
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
}
ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-10 19:29:59 +08:00
static void __net_exit ping_v6_proc_exit_net(struct net *net)
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
{
ipv{4,6}/ping: simplify proc file creation Remove the pointless ping_seq_afinfo indirection and make the code look like most other protocols. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11 02:04:20 +08:00
remove_proc_entry("icmp6", net->proc_net);
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
}
static struct pernet_operations ping_v6_net_ops = {
.init = ping_v6_proc_init_net,
.exit = ping_v6_proc_exit_net,
};
#endif
int __init pingv6_init(void)
{
#ifdef CONFIG_PROC_FS
int ret = register_pernet_subsys(&ping_v6_net_ops);
if (ret)
return ret;
#endif
pingv6_ops.ipv6_recv_error = ipv6_recv_error;
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-20 10:43:08 +08:00
pingv6_ops.ip6_datagram_recv_common_ctl = ip6_datagram_recv_common_ctl;
pingv6_ops.ip6_datagram_recv_specific_ctl =
ip6_datagram_recv_specific_ctl;
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
pingv6_ops.icmpv6_err_convert = icmpv6_err_convert;
pingv6_ops.ipv6_icmp_error = ipv6_icmp_error;
pingv6_ops.ipv6_chk_addr = ipv6_chk_addr;
return inet6_register_protosw(&pingv6_protosw);
}
/* This never gets called because it's not possible to unload the ipv6 module,
* but just in case.
*/
void pingv6_exit(void)
{
pingv6_ops.ipv6_recv_error = dummy_ipv6_recv_error;
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-20 10:43:08 +08:00
pingv6_ops.ip6_datagram_recv_common_ctl = dummy_ip6_datagram_recv_ctl;
pingv6_ops.ip6_datagram_recv_specific_ctl = dummy_ip6_datagram_recv_ctl;
net: ipv6: Implement /proc/net/icmp6. The format is based on /proc/net/icmp and /proc/net/{udp,raw}6. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Couldn't figure out how to test without CONFIG_PROC_FS enabled. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 23:05:50 +08:00
pingv6_ops.icmpv6_err_convert = dummy_icmpv6_err_convert;
pingv6_ops.ipv6_icmp_error = dummy_ipv6_icmp_error;
pingv6_ops.ipv6_chk_addr = dummy_ipv6_chk_addr;
#ifdef CONFIG_PROC_FS
unregister_pernet_subsys(&ping_v6_net_ops);
#endif
inet6_unregister_protosw(&pingv6_protosw);
}