OpenCloudOS-Kernel/fs/ocfs2/dlmfs/dlmfs.c

666 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* -*- mode: c; c-basic-offset: 8; -*-
* vim: noexpandtab sw=8 ts=8 sts=0:
*
* dlmfs.c
*
* Code which implements the kernel side of a minimal userspace
* interface to our DLM. This file handles the virtual file system
* used for communication with userspace. Credit should go to ramfs,
* which was a template for the fs side of this module.
*
* Copyright (C) 2003, 2004 Oracle. All rights reserved.
*/
/* Simple VFS hooks based on: */
/*
* Resizable simple ram filesystem for Linux.
*
* Copyright (C) 2000 Linus Torvalds.
* 2000 Transmeta Corp.
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/backing-dev.h>
#include <linux/poll.h>
#include <linux/uaccess.h>
#include "../stackglue.h"
#include "userdlm.h"
#define MLOG_MASK_PREFIX ML_DLMFS
#include "../cluster/masklog.h"
static const struct super_operations dlmfs_ops;
static const struct file_operations dlmfs_file_operations;
static const struct inode_operations dlmfs_dir_inode_operations;
static const struct inode_operations dlmfs_root_inode_operations;
static const struct inode_operations dlmfs_file_inode_operations;
static struct kmem_cache *dlmfs_inode_cache;
struct workqueue_struct *user_dlm_worker;
/*
* These are the ABI capabilities of dlmfs.
*
* Over time, dlmfs has added some features that were not part of the
* initial ABI. Unfortunately, some of these features are not detectable
* via standard usage. For example, Linux's default poll always returns
* EPOLLIN, so there is no way for a caller of poll(2) to know when dlmfs
* added poll support. Instead, we provide this list of new capabilities.
*
* Capabilities is a read-only attribute. We do it as a module parameter
* so we can discover it whether dlmfs is built in, loaded, or even not
* loaded.
*
* The ABI features are local to this machine's dlmfs mount. This is
* distinct from the locking protocol, which is concerned with inter-node
* interaction.
*
* Capabilities:
* - bast : EPOLLIN against the file descriptor of a held lock
* signifies a bast fired on the lock.
*/
#define DLMFS_CAPABILITIES "bast stackglue"
static int param_set_dlmfs_capabilities(const char *val,
const struct kernel_param *kp)
{
printk(KERN_ERR "%s: readonly parameter\n", kp->name);
return -EINVAL;
}
static int param_get_dlmfs_capabilities(char *buffer,
const struct kernel_param *kp)
{
return strlcpy(buffer, DLMFS_CAPABILITIES,
strlen(DLMFS_CAPABILITIES) + 1);
}
module_param_call(capabilities, param_set_dlmfs_capabilities,
param_get_dlmfs_capabilities, NULL, 0444);
MODULE_PARM_DESC(capabilities, DLMFS_CAPABILITIES);
/*
* decodes a set of open flags into a valid lock level and a set of flags.
* returns < 0 if we have invalid flags
* flags which mean something to us:
* O_RDONLY -> PRMODE level
* O_WRONLY -> EXMODE level
*
* O_NONBLOCK -> NOQUEUE
*/
static int dlmfs_decode_open_flags(int open_flags,
int *level,
int *flags)
{
if (open_flags & (O_WRONLY|O_RDWR))
*level = DLM_LOCK_EX;
else
*level = DLM_LOCK_PR;
*flags = 0;
if (open_flags & O_NONBLOCK)
*flags |= DLM_LKF_NOQUEUE;
return 0;
}
static int dlmfs_file_open(struct inode *inode,
struct file *file)
{
int status, level, flags;
struct dlmfs_filp_private *fp = NULL;
struct dlmfs_inode_private *ip;
if (S_ISDIR(inode->i_mode))
BUG();
mlog(0, "open called on inode %lu, flags 0x%x\n", inode->i_ino,
file->f_flags);
status = dlmfs_decode_open_flags(file->f_flags, &level, &flags);
if (status < 0)
goto bail;
/* We don't want to honor O_APPEND at read/write time as it
* doesn't make sense for LVB writes. */
file->f_flags &= ~O_APPEND;
fp = kmalloc(sizeof(*fp), GFP_NOFS);
if (!fp) {
status = -ENOMEM;
goto bail;
}
fp->fp_lock_level = level;
ip = DLMFS_I(inode);
status = user_dlm_cluster_lock(&ip->ip_lockres, level, flags);
if (status < 0) {
/* this is a strange error to return here but I want
* to be able userspace to be able to distinguish a
* valid lock request from one that simply couldn't be
* granted. */
if (flags & DLM_LKF_NOQUEUE && status == -EAGAIN)
status = -ETXTBSY;
kfree(fp);
goto bail;
}
file->private_data = fp;
bail:
return status;
}
static int dlmfs_file_release(struct inode *inode,
struct file *file)
{
int level;
struct dlmfs_inode_private *ip = DLMFS_I(inode);
struct dlmfs_filp_private *fp = file->private_data;
if (S_ISDIR(inode->i_mode))
BUG();
mlog(0, "close called on inode %lu\n", inode->i_ino);
if (fp) {
level = fp->fp_lock_level;
if (level != DLM_LOCK_IV)
user_dlm_cluster_unlock(&ip->ip_lockres, level);
kfree(fp);
file->private_data = NULL;
}
return 0;
}
/*
* We do ->setattr() just to override size changes. Our size is the size
* of the LVB and nothing else.
*/
static int dlmfs_file_setattr(struct dentry *dentry, struct iattr *attr)
{
int error;
struct inode *inode = d_inode(dentry);
attr->ia_valid &= ~ATTR_SIZE;
error = setattr_prepare(dentry, attr);
if (error)
return error;
setattr_copy(inode, attr);
mark_inode_dirty(inode);
return 0;
}
static __poll_t dlmfs_file_poll(struct file *file, poll_table *wait)
{
__poll_t event = 0;
struct inode *inode = file_inode(file);
struct dlmfs_inode_private *ip = DLMFS_I(inode);
poll_wait(file, &ip->ip_lockres.l_event, wait);
spin_lock(&ip->ip_lockres.l_lock);
if (ip->ip_lockres.l_flags & USER_LOCK_BLOCKED)
event = EPOLLIN | EPOLLRDNORM;
spin_unlock(&ip->ip_lockres.l_lock);
return event;
}
static ssize_t dlmfs_file_read(struct file *filp,
char __user *buf,
size_t count,
loff_t *ppos)
{
int bytes_left;
ssize_t readlen, got;
char *lvb_buf;
struct inode *inode = file_inode(filp);
mlog(0, "inode %lu, count = %zu, *ppos = %llu\n",
inode->i_ino, count, *ppos);
if (*ppos >= i_size_read(inode))
return 0;
if (!count)
return 0;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 10:57:57 +08:00
if (!access_ok(buf, count))
return -EFAULT;
/* don't read past the lvb */
if ((count + *ppos) > i_size_read(inode))
readlen = i_size_read(inode) - *ppos;
else
readlen = count;
lvb_buf = kmalloc(readlen, GFP_NOFS);
if (!lvb_buf)
return -ENOMEM;
got = user_dlm_read_lvb(inode, lvb_buf, readlen);
if (got) {
BUG_ON(got != readlen);
bytes_left = __copy_to_user(buf, lvb_buf, readlen);
readlen -= bytes_left;
} else
readlen = 0;
kfree(lvb_buf);
*ppos = *ppos + readlen;
mlog(0, "read %zd bytes\n", readlen);
return readlen;
}
static ssize_t dlmfs_file_write(struct file *filp,
const char __user *buf,
size_t count,
loff_t *ppos)
{
int bytes_left;
char *lvb_buf;
struct inode *inode = file_inode(filp);
mlog(0, "inode %lu, count = %zu, *ppos = %llu\n",
inode->i_ino, count, *ppos);
if (*ppos >= i_size_read(inode))
return -ENOSPC;
/* don't write past the lvb */
if (count > i_size_read(inode) - *ppos)
count = i_size_read(inode) - *ppos;
if (!count)
return 0;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 10:57:57 +08:00
if (!access_ok(buf, count))
return -EFAULT;
lvb_buf = kmalloc(count, GFP_NOFS);
if (!lvb_buf)
return -ENOMEM;
bytes_left = copy_from_user(lvb_buf, buf, count);
count -= bytes_left;
if (count)
user_dlm_write_lvb(inode, lvb_buf, count);
kfree(lvb_buf);
*ppos = *ppos + count;
mlog(0, "wrote %zu bytes\n", count);
return count;
}
static void dlmfs_init_once(void *foo)
{
struct dlmfs_inode_private *ip =
(struct dlmfs_inode_private *) foo;
ip->ip_conn = NULL;
ip->ip_parent = NULL;
inode_init_once(&ip->ip_vfs_inode);
}
static struct inode *dlmfs_alloc_inode(struct super_block *sb)
{
struct dlmfs_inode_private *ip;
ip = kmem_cache_alloc(dlmfs_inode_cache, GFP_NOFS);
if (!ip)
return NULL;
return &ip->ip_vfs_inode;
}
static void dlmfs_free_inode(struct inode *inode)
{
kmem_cache_free(dlmfs_inode_cache, DLMFS_I(inode));
}
static void dlmfs_evict_inode(struct inode *inode)
{
int status;
struct dlmfs_inode_private *ip;
clear_inode(inode);
mlog(0, "inode %lu\n", inode->i_ino);
ip = DLMFS_I(inode);
if (S_ISREG(inode->i_mode)) {
status = user_dlm_destroy_lock(&ip->ip_lockres);
if (status < 0)
mlog_errno(status);
iput(ip->ip_parent);
goto clear_fields;
}
mlog(0, "we're a directory, ip->ip_conn = 0x%p\n", ip->ip_conn);
/* we must be a directory. If required, lets unregister the
* dlm context now. */
if (ip->ip_conn)
user_dlm_unregister(ip->ip_conn);
clear_fields:
ip->ip_parent = NULL;
ip->ip_conn = NULL;
}
static struct inode *dlmfs_get_root_inode(struct super_block *sb)
{
struct inode *inode = new_inode(sb);
umode_t mode = S_IFDIR | 0755;
if (inode) {
inode->i_ino = get_next_ino();
inode_init_owner(inode, NULL, mode);
inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
inc_nlink(inode);
inode->i_fop = &simple_dir_operations;
inode->i_op = &dlmfs_root_inode_operations;
}
return inode;
}
static struct inode *dlmfs_get_inode(struct inode *parent,
struct dentry *dentry,
umode_t mode)
{
struct super_block *sb = parent->i_sb;
struct inode * inode = new_inode(sb);
struct dlmfs_inode_private *ip;
if (!inode)
return NULL;
inode->i_ino = get_next_ino();
inode_init_owner(inode, parent, mode);
inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
ip = DLMFS_I(inode);
ip->ip_conn = DLMFS_I(parent)->ip_conn;
switch (mode & S_IFMT) {
default:
/* for now we don't support anything other than
* directories and regular files. */
BUG();
break;
case S_IFREG:
inode->i_op = &dlmfs_file_inode_operations;
inode->i_fop = &dlmfs_file_operations;
i_size_write(inode, DLM_LVB_LEN);
user_dlm_lock_res_init(&ip->ip_lockres, dentry);
/* released at clear_inode time, this insures that we
* get to drop the dlm reference on each lock *before*
* we call the unregister code for releasing parent
* directories. */
ip->ip_parent = igrab(parent);
BUG_ON(!ip->ip_parent);
break;
case S_IFDIR:
inode->i_op = &dlmfs_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
/* directory inodes start off with i_nlink ==
* 2 (for "." entry) */
inc_nlink(inode);
break;
}
return inode;
}
/*
* File creation. Allocate an inode, and we're done..
*/
/* SMP-safe */
static int dlmfs_mkdir(struct inode * dir,
struct dentry * dentry,
umode_t mode)
{
int status;
struct inode *inode = NULL;
const struct qstr *domain = &dentry->d_name;
struct dlmfs_inode_private *ip;
struct ocfs2_cluster_connection *conn;
mlog(0, "mkdir %.*s\n", domain->len, domain->name);
/* verify that we have a proper domain */
if (domain->len >= GROUP_NAME_MAX) {
status = -EINVAL;
mlog(ML_ERROR, "invalid domain name for directory.\n");
goto bail;
}
inode = dlmfs_get_inode(dir, dentry, mode | S_IFDIR);
if (!inode) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
ip = DLMFS_I(inode);
conn = user_dlm_register(domain);
if (IS_ERR(conn)) {
status = PTR_ERR(conn);
mlog(ML_ERROR, "Error %d could not register domain \"%.*s\"\n",
status, domain->len, domain->name);
goto bail;
}
ip->ip_conn = conn;
inc_nlink(dir);
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
status = 0;
bail:
if (status < 0)
iput(inode);
return status;
}
static int dlmfs_create(struct inode *dir,
struct dentry *dentry,
umode_t mode,
bool excl)
{
int status = 0;
struct inode *inode;
const struct qstr *name = &dentry->d_name;
mlog(0, "create %.*s\n", name->len, name->name);
/* verify name is valid and doesn't contain any dlm reserved
* characters */
if (name->len >= USER_DLM_LOCK_ID_MAX_LEN ||
name->name[0] == '$') {
status = -EINVAL;
mlog(ML_ERROR, "invalid lock name, %.*s\n", name->len,
name->name);
goto bail;
}
inode = dlmfs_get_inode(dir, dentry, mode | S_IFREG);
if (!inode) {
status = -ENOMEM;
mlog_errno(status);
goto bail;
}
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
bail:
return status;
}
static int dlmfs_unlink(struct inode *dir,
struct dentry *dentry)
{
int status;
struct inode *inode = d_inode(dentry);
mlog(0, "unlink inode %lu\n", inode->i_ino);
/* if there are no current holders, or none that are waiting
* to acquire a lock, this basically destroys our lockres. */
status = user_dlm_destroy_lock(&DLMFS_I(inode)->ip_lockres);
if (status < 0) {
mlog(ML_ERROR, "unlink %pd, error %d from destroy\n",
dentry, status);
goto bail;
}
status = simple_unlink(dir, dentry);
bail:
return status;
}
static int dlmfs_fill_super(struct super_block * sb,
void * data,
int silent)
{
sb->s_maxbytes = MAX_LFS_FILESIZE;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
sb->s_blocksize = PAGE_SIZE;
sb->s_blocksize_bits = PAGE_SHIFT;
sb->s_magic = DLMFS_MAGIC;
sb->s_op = &dlmfs_ops;
sb->s_root = d_make_root(dlmfs_get_root_inode(sb));
if (!sb->s_root)
return -ENOMEM;
return 0;
}
static const struct file_operations dlmfs_file_operations = {
.open = dlmfs_file_open,
.release = dlmfs_file_release,
.poll = dlmfs_file_poll,
.read = dlmfs_file_read,
.write = dlmfs_file_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = default_llseek,
};
static const struct inode_operations dlmfs_dir_inode_operations = {
.create = dlmfs_create,
.lookup = simple_lookup,
.unlink = dlmfs_unlink,
};
/* this way we can restrict mkdir to only the toplevel of the fs. */
static const struct inode_operations dlmfs_root_inode_operations = {
.lookup = simple_lookup,
.mkdir = dlmfs_mkdir,
.rmdir = simple_rmdir,
};
static const struct super_operations dlmfs_ops = {
.statfs = simple_statfs,
.alloc_inode = dlmfs_alloc_inode,
.free_inode = dlmfs_free_inode,
.evict_inode = dlmfs_evict_inode,
.drop_inode = generic_delete_inode,
};
static const struct inode_operations dlmfs_file_inode_operations = {
.getattr = simple_getattr,
.setattr = dlmfs_file_setattr,
};
static struct dentry *dlmfs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
return mount_nodev(fs_type, flags, data, dlmfs_fill_super);
}
static struct file_system_type dlmfs_fs_type = {
.owner = THIS_MODULE,
.name = "ocfs2_dlmfs",
.mount = dlmfs_mount,
.kill_sb = kill_litter_super,
};
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 11:39:14 +08:00
MODULE_ALIAS_FS("ocfs2_dlmfs");
static int __init init_dlmfs_fs(void)
{
int status;
int cleanup_inode = 0, cleanup_worker = 0;
dlmfs_inode_cache = kmem_cache_create("dlmfs_inode_cache",
sizeof(struct dlmfs_inode_private),
0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
2016-01-15 07:18:21 +08:00
SLAB_MEM_SPREAD|SLAB_ACCOUNT),
dlmfs_init_once);
if (!dlmfs_inode_cache) {
status = -ENOMEM;
goto bail;
}
cleanup_inode = 1;
user_dlm_worker = alloc_workqueue("user_dlm", WQ_MEM_RECLAIM, 0);
if (!user_dlm_worker) {
status = -ENOMEM;
goto bail;
}
cleanup_worker = 1;
user_dlm_set_locking_protocol();
status = register_filesystem(&dlmfs_fs_type);
bail:
if (status) {
if (cleanup_inode)
kmem_cache_destroy(dlmfs_inode_cache);
if (cleanup_worker)
destroy_workqueue(user_dlm_worker);
} else
printk("OCFS2 User DLM kernel interface loaded\n");
return status;
}
static void __exit exit_dlmfs_fs(void)
{
unregister_filesystem(&dlmfs_fs_type);
destroy_workqueue(user_dlm_worker);
/*
* Make sure all delayed rcu free inodes are flushed before we
* destroy cache.
*/
rcu_barrier();
kmem_cache_destroy(dlmfs_inode_cache);
}
MODULE_AUTHOR("Oracle");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("OCFS2 DLM-Filesystem");
module_init(init_dlmfs_fs)
module_exit(exit_dlmfs_fs)