OpenCloudOS-Kernel/fs/coda/coda_linux.c

207 lines
5.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Inode operations for Coda filesystem
* Original version: (C) 1996 P. Braam and M. Callahan
* Rewritten for Linux 2.1. (C) 1997 Carnegie Mellon University
*
* Carnegie Mellon encourages users to contribute improvements to
* the Coda project. Contact Peter Braam (coda@cs.cmu.edu).
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/uaccess.h>
#include <linux/string.h>
#include <linux/coda.h>
#include "coda_psdev.h"
#include "coda_linux.h"
/* initialize the debugging variables */
int coda_fake_statfs;
/* print a fid */
char * coda_f2s(struct CodaFid *f)
{
static char s[60];
sprintf(s, "(%08x.%08x.%08x.%08x)", f->opaque[0], f->opaque[1], f->opaque[2], f->opaque[3]);
return s;
}
/* recognize special .CONTROL name */
int coda_iscontrol(const char *name, size_t length)
{
return ((CODA_CONTROLLEN == length) &&
(strncmp(name, CODA_CONTROL, CODA_CONTROLLEN) == 0));
}
unsigned short coda_flags_to_cflags(unsigned short flags)
{
unsigned short coda_flags = 0;
if ((flags & O_ACCMODE) == O_RDONLY)
coda_flags |= C_O_READ;
if ((flags & O_ACCMODE) == O_RDWR)
coda_flags |= C_O_READ | C_O_WRITE;
if ((flags & O_ACCMODE) == O_WRONLY)
coda_flags |= C_O_WRITE;
if (flags & O_TRUNC)
coda_flags |= C_O_TRUNC;
if (flags & O_CREAT)
coda_flags |= C_O_CREAT;
if (flags & O_EXCL)
coda_flags |= C_O_EXCL;
return coda_flags;
}
static struct timespec64 coda_to_timespec64(struct coda_timespec ts)
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
{
struct timespec64 ts64 = {
.tv_sec = ts.tv_sec,
.tv_nsec = ts.tv_nsec,
};
return ts64;
}
static struct coda_timespec timespec64_to_coda(struct timespec64 ts64)
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
{
struct coda_timespec ts = {
.tv_sec = ts64.tv_sec,
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
.tv_nsec = ts64.tv_nsec,
};
return ts;
}
/* utility functions below */
void coda_vattr_to_iattr(struct inode *inode, struct coda_vattr *attr)
{
int inode_type;
/* inode's i_flags, i_ino are set by iget
XXX: is this all we need ??
*/
switch (attr->va_type) {
case C_VNON:
inode_type = 0;
break;
case C_VREG:
inode_type = S_IFREG;
break;
case C_VDIR:
inode_type = S_IFDIR;
break;
case C_VLNK:
inode_type = S_IFLNK;
break;
default:
inode_type = 0;
}
inode->i_mode |= inode_type;
if (attr->va_mode != (u_short) -1)
inode->i_mode = attr->va_mode | inode_type;
if (attr->va_uid != -1)
inode->i_uid = make_kuid(&init_user_ns, (uid_t) attr->va_uid);
if (attr->va_gid != -1)
inode->i_gid = make_kgid(&init_user_ns, (gid_t) attr->va_gid);
if (attr->va_nlink != -1)
set_nlink(inode, attr->va_nlink);
if (attr->va_size != -1)
inode->i_size = attr->va_size;
if (attr->va_size != -1)
inode->i_blocks = (attr->va_size + 511) >> 9;
if (attr->va_atime.tv_sec != -1)
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
inode->i_atime = coda_to_timespec64(attr->va_atime);
if (attr->va_mtime.tv_sec != -1)
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
inode->i_mtime = coda_to_timespec64(attr->va_mtime);
if (attr->va_ctime.tv_sec != -1)
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
inode->i_ctime = coda_to_timespec64(attr->va_ctime);
}
/*
* BSD sets attributes that need not be modified to -1.
* Linux uses the valid field to indicate what should be
* looked at. The BSD type field needs to be deduced from linux
* mode.
* So we have to do some translations here.
*/
void coda_iattr_to_vattr(struct iattr *iattr, struct coda_vattr *vattr)
{
unsigned int valid;
/* clean out */
vattr->va_mode = -1;
vattr->va_uid = (vuid_t) -1;
vattr->va_gid = (vgid_t) -1;
vattr->va_size = (off_t) -1;
vattr->va_atime.tv_sec = (int64_t) -1;
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_atime.tv_nsec = (long) -1;
vattr->va_mtime.tv_sec = (int64_t) -1;
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_mtime.tv_nsec = (long) -1;
vattr->va_ctime.tv_sec = (int64_t) -1;
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_ctime.tv_nsec = (long) -1;
vattr->va_type = C_VNON;
vattr->va_fileid = -1;
vattr->va_gen = -1;
vattr->va_bytes = -1;
vattr->va_nlink = -1;
vattr->va_blocksize = -1;
vattr->va_rdev = -1;
vattr->va_flags = 0;
/* determine the type */
#if 0
mode = iattr->ia_mode;
if ( S_ISDIR(mode) ) {
vattr->va_type = C_VDIR;
} else if ( S_ISREG(mode) ) {
vattr->va_type = C_VREG;
} else if ( S_ISLNK(mode) ) {
vattr->va_type = C_VLNK;
} else {
/* don't do others */
vattr->va_type = C_VNON;
}
#endif
/* set those vattrs that need change */
valid = iattr->ia_valid;
if ( valid & ATTR_MODE ) {
vattr->va_mode = iattr->ia_mode;
}
if ( valid & ATTR_UID ) {
vattr->va_uid = (vuid_t) from_kuid(&init_user_ns, iattr->ia_uid);
}
if ( valid & ATTR_GID ) {
vattr->va_gid = (vgid_t) from_kgid(&init_user_ns, iattr->ia_gid);
}
if ( valid & ATTR_SIZE ) {
vattr->va_size = iattr->ia_size;
}
if ( valid & ATTR_ATIME ) {
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_atime = timespec64_to_coda(iattr->ia_atime);
}
if ( valid & ATTR_MTIME ) {
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_mtime = timespec64_to_coda(iattr->ia_mtime);
}
if ( valid & ATTR_CTIME ) {
coda: stop using 'struct timespec' in user API We exchange file timestamps with user space using psdev device read/write operations with a fixed but architecture specific binary layout. On 32-bit systems, this uses a 'timespec' structure that is defined by the C library to contain two 32-bit values for seconds and nanoseconds. As we get ready for the year 2038 overflow of the 32-bit signed seconds, the kernel now uses 64-bit timestamps internally, and user space will do the same change by changing the 'timespec' definition in the future. Unfortunately, this breaks the layout of the coda_vattr structure, so we need to redefine that in terms of something that does not change. I'm introducing a new 'struct vtimespec' structure here that keeps the existing layout, and the same change has to be done in the coda user space copy of linux/coda.h before anyone can use that on a 32-bit architecture with 64-bit time_t. An open question is what should happen to actual times past y2038, as they are now truncated to the last valid date when sent to user space, and interpreted as pre-1970 times when a timestamp with the MSB set is read back into the kernel. Alternatively, we could change the new timespec64_to_coda()/coda_to_timespec64() functions to use a different interpretation and extend the available range further to the future by disallowing past timestamps. This would require more changes in the user space side though. Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu Link: https://patchwork.kernel.org/patch/10474735/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17 07:28:32 +08:00
vattr->va_ctime = timespec64_to_coda(iattr->ia_ctime);
}
}