OpenCloudOS-Kernel/drivers/firewire/nosy.c

713 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* nosy - Snoop mode driver for TI PCILynx 1394 controllers
* Copyright (C) 2002-2007 Kristian Høgsberg
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
*/
#include <linux/device.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#include <linux/errno.h>
#include <linux/fs.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/mutex.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/sched.h> /* required for linux/wait.h */
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/time64.h>
#include <linux/timex.h>
#include <linux/uaccess.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
#include <linux/atomic.h>
#include <asm/byteorder.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#include "nosy.h"
#include "nosy-user.h"
#define TCODE_PHY_PACKET 0x10
#define PCI_DEVICE_ID_TI_PCILYNX 0x8000
static char driver_name[] = KBUILD_MODNAME;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
/* this is the physical layout of a PCL, its size is 128 bytes */
struct pcl {
__le32 next;
__le32 async_error_next;
u32 user_data;
__le32 pcl_status;
__le32 remaining_transfer_count;
__le32 next_data_buffer;
struct {
__le32 control;
__le32 pointer;
} buffer[13];
};
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
struct packet {
unsigned int length;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
char data[0];
};
struct packet_buffer {
char *data;
size_t capacity;
long total_packet_count, lost_packet_count;
atomic_t size;
struct packet *head, *tail;
wait_queue_head_t wait;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
};
struct pcilynx {
struct pci_dev *pci_device;
__iomem char *registers;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
struct pcl *rcv_start_pcl, *rcv_pcl;
__le32 *rcv_buffer;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus;
spinlock_t client_list_lock;
struct list_head client_list;
struct miscdevice misc;
struct list_head link;
struct kref kref;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
};
static inline struct pcilynx *
lynx_get(struct pcilynx *lynx)
{
kref_get(&lynx->kref);
return lynx;
}
static void
lynx_release(struct kref *kref)
{
kfree(container_of(kref, struct pcilynx, kref));
}
static inline void
lynx_put(struct pcilynx *lynx)
{
kref_put(&lynx->kref, lynx_release);
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
struct client {
struct pcilynx *lynx;
u32 tcode_mask;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
struct packet_buffer buffer;
struct list_head link;
};
static DEFINE_MUTEX(card_mutex);
static LIST_HEAD(card_list);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
static int
packet_buffer_init(struct packet_buffer *buffer, size_t capacity)
{
buffer->data = kmalloc(capacity, GFP_KERNEL);
if (buffer->data == NULL)
return -ENOMEM;
buffer->head = (struct packet *) buffer->data;
buffer->tail = (struct packet *) buffer->data;
buffer->capacity = capacity;
buffer->lost_packet_count = 0;
atomic_set(&buffer->size, 0);
init_waitqueue_head(&buffer->wait);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return 0;
}
static void
packet_buffer_destroy(struct packet_buffer *buffer)
{
kfree(buffer->data);
}
static int
packet_buffer_get(struct client *client, char __user *data, size_t user_length)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct packet_buffer *buffer = &client->buffer;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
size_t length;
char *end;
if (wait_event_interruptible(buffer->wait,
atomic_read(&buffer->size) > 0) ||
list_empty(&client->lynx->link))
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return -ERESTARTSYS;
if (atomic_read(&buffer->size) == 0)
return -ENODEV;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
/* FIXME: Check length <= user_length. */
end = buffer->data + buffer->capacity;
length = buffer->head->length;
if (&buffer->head->data[length] < end) {
if (copy_to_user(data, buffer->head->data, length))
return -EFAULT;
buffer->head = (struct packet *) &buffer->head->data[length];
} else {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
size_t split = end - buffer->head->data;
if (copy_to_user(data, buffer->head->data, split))
return -EFAULT;
if (copy_to_user(data + split, buffer->data, length - split))
return -EFAULT;
buffer->head = (struct packet *) &buffer->data[length - split];
}
/*
* Decrease buffer->size as the last thing, since this is what
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
* keeps the interrupt from overwriting the packet we are
* retrieving from the buffer.
*/
atomic_sub(sizeof(struct packet) + length, &buffer->size);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return length;
}
static void
packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length)
{
char *end;
buffer->total_packet_count++;
if (buffer->capacity <
atomic_read(&buffer->size) + sizeof(struct packet) + length) {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
buffer->lost_packet_count++;
return;
}
end = buffer->data + buffer->capacity;
buffer->tail->length = length;
if (&buffer->tail->data[length] < end) {
memcpy(buffer->tail->data, data, length);
buffer->tail = (struct packet *) &buffer->tail->data[length];
} else {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
size_t split = end - buffer->tail->data;
memcpy(buffer->tail->data, data, split);
memcpy(buffer->data, data + split, length - split);
buffer->tail = (struct packet *) &buffer->data[length - split];
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
/* Finally, adjust buffer size and wake up userspace reader. */
atomic_add(sizeof(struct packet) + length, &buffer->size);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
wake_up_interruptible(&buffer->wait);
}
static inline void
reg_write(struct pcilynx *lynx, int offset, u32 data)
{
writel(data, lynx->registers + offset);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static inline u32
reg_read(struct pcilynx *lynx, int offset)
{
return readl(lynx->registers + offset);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static inline void
reg_set_bits(struct pcilynx *lynx, int offset, u32 mask)
{
reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
/*
* Maybe the pcl programs could be set up to just append data instead
* of using a whole packet.
*/
static inline void
run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus,
int dmachan)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus);
reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static int
set_phy_reg(struct pcilynx *lynx, int addr, int val)
{
if (addr > 15) {
dev_err(&lynx->pci_device->dev,
"PHY register address %d out of range\n", addr);
return -1;
}
if (val > 0xff) {
dev_err(&lynx->pci_device->dev,
"PHY register value %d out of range\n", val);
return -1;
}
reg_write(lynx, LINK_PHY, LINK_PHY_WRITE |
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val));
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static int
nosy_open(struct inode *inode, struct file *file)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
int minor = iminor(inode);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
struct client *client;
struct pcilynx *tmp, *lynx = NULL;
mutex_lock(&card_mutex);
list_for_each_entry(tmp, &card_list, link)
if (tmp->misc.minor == minor) {
lynx = lynx_get(tmp);
break;
}
mutex_unlock(&card_mutex);
if (lynx == NULL)
return -ENODEV;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
client = kmalloc(sizeof *client, GFP_KERNEL);
if (client == NULL)
goto fail;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
client->tcode_mask = ~0;
client->lynx = lynx;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
INIT_LIST_HEAD(&client->link);
if (packet_buffer_init(&client->buffer, 128 * 1024) < 0)
goto fail;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
file->private_data = client;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
*: convert stream-like files from nonseekable_open -> stream_open Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-03-27 04:51:19 +08:00
return stream_open(inode, file);
fail:
kfree(client);
lynx_put(lynx);
return -ENOMEM;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static int
nosy_release(struct inode *inode, struct file *file)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct client *client = file->private_data;
struct pcilynx *lynx = client->lynx;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
spin_lock_irq(&lynx->client_list_lock);
list_del_init(&client->link);
spin_unlock_irq(&lynx->client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
packet_buffer_destroy(&client->buffer);
kfree(client);
lynx_put(lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static __poll_t
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
nosy_poll(struct file *file, poll_table *pt)
{
struct client *client = file->private_data;
__poll_t ret = 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
poll_wait(file, &client->buffer.wait, pt);
if (atomic_read(&client->buffer.size) > 0)
ret = EPOLLIN | EPOLLRDNORM;
if (list_empty(&client->lynx->link))
ret |= EPOLLHUP;
return ret;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static ssize_t
nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct client *client = file->private_data;
return packet_buffer_get(client, buffer, count);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static long
nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct client *client = file->private_data;
spinlock_t *client_list_lock = &client->lynx->client_list_lock;
struct nosy_stats stats;
int ret;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
switch (cmd) {
case NOSY_IOC_GET_STATS:
spin_lock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
stats.total_packet_count = client->buffer.total_packet_count;
stats.lost_packet_count = client->buffer.lost_packet_count;
spin_unlock_irq(client_list_lock);
if (copy_to_user((void __user *) arg, &stats, sizeof stats))
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return -EFAULT;
else
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
case NOSY_IOC_START:
ret = -EBUSY;
spin_lock_irq(client_list_lock);
if (list_empty(&client->link)) {
list_add_tail(&client->link, &client->lynx->client_list);
ret = 0;
}
spin_unlock_irq(client_list_lock);
return ret;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
case NOSY_IOC_STOP:
spin_lock_irq(client_list_lock);
list_del_init(&client->link);
spin_unlock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return 0;
case NOSY_IOC_FILTER:
spin_lock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
client->tcode_mask = arg;
spin_unlock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return 0;
default:
return -EINVAL;
/* Flush buffer, configure filter. */
}
}
static const struct file_operations nosy_ops = {
.owner = THIS_MODULE,
.read = nosy_read,
.unlocked_ioctl = nosy_ioctl,
.poll = nosy_poll,
.open = nosy_open,
.release = nosy_release,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
};
#define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */
static void
packet_irq_handler(struct pcilynx *lynx)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct client *client;
u32 tcode_mask, tcode, timestamp;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
size_t length;
struct timespec64 ts64;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
/* FIXME: Also report rcv_speed. */
length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff;
tcode = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
ktime_get_real_ts64(&ts64);
timestamp = ts64.tv_nsec / NSEC_PER_USEC;
lynx->rcv_buffer[0] = (__force __le32)timestamp;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
if (length == PHY_PACKET_SIZE)
tcode_mask = 1 << TCODE_PHY_PACKET;
else
tcode_mask = 1 << tcode;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
spin_lock(&lynx->client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
list_for_each_entry(client, &lynx->client_list, link)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
if (client->tcode_mask & tcode_mask)
packet_buffer_put(&client->buffer,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->rcv_buffer, length + 4);
spin_unlock(&lynx->client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static void
bus_reset_irq_handler(struct pcilynx *lynx)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
struct client *client;
struct timespec64 ts64;
u32 timestamp;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
ktime_get_real_ts64(&ts64);
timestamp = ts64.tv_nsec / NSEC_PER_USEC;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
spin_lock(&lynx->client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
list_for_each_entry(client, &lynx->client_list, link)
packet_buffer_put(&client->buffer, &timestamp, 4);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
spin_unlock(&lynx->client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static irqreturn_t
irq_handler(int irq, void *device)
{
struct pcilynx *lynx = device;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
u32 pci_int_status;
pci_int_status = reg_read(lynx, PCI_INT_STATUS);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
if (pci_int_status == ~0)
/* Card was ejected. */
return IRQ_NONE;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
if ((pci_int_status & PCI_INT_INT_PEND) == 0)
/* Not our interrupt, bail out quickly. */
return IRQ_NONE;
if ((pci_int_status & PCI_INT_P1394_INT) != 0) {
u32 link_int_status;
link_int_status = reg_read(lynx, LINK_INT_STATUS);
reg_write(lynx, LINK_INT_STATUS, link_int_status);
if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0)
bus_reset_irq_handler(lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
/* Clear the PCI_INT_STATUS register only after clearing the
* LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will
* be set again immediately. */
reg_write(lynx, PCI_INT_STATUS, pci_int_status);
if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) {
packet_irq_handler(lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
}
return IRQ_HANDLED;
}
static void
remove_card(struct pci_dev *dev)
{
struct pcilynx *lynx = pci_get_drvdata(dev);
struct client *client;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
mutex_lock(&card_mutex);
list_del_init(&lynx->link);
misc_deregister(&lynx->misc);
mutex_unlock(&card_mutex);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
reg_write(lynx, PCI_INT_ENABLE, 0);
free_irq(lynx->pci_device->irq, lynx);
spin_lock_irq(&lynx->client_list_lock);
list_for_each_entry(client, &lynx->client_list, link)
wake_up_interruptible(&client->buffer.wait);
spin_unlock_irq(&lynx->client_list_lock);
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->rcv_pcl, lynx->rcv_pcl_bus);
pci_free_consistent(lynx->pci_device, PAGE_SIZE,
lynx->rcv_buffer, lynx->rcv_buffer_bus);
iounmap(lynx->registers);
pci_disable_device(dev);
lynx_put(lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
#define RCV_BUFFER_SIZE (16 * 1024)
static int
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
add_card(struct pci_dev *dev, const struct pci_device_id *unused)
{
struct pcilynx *lynx;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
u32 p, end;
int ret, i;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
dev_err(&dev->dev,
"DMA address limits not supported for PCILynx hardware\n");
return -ENXIO;
}
if (pci_enable_device(dev)) {
dev_err(&dev->dev, "Failed to enable PCILynx hardware\n");
return -ENXIO;
}
pci_set_master(dev);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx = kzalloc(sizeof *lynx, GFP_KERNEL);
if (lynx == NULL) {
dev_err(&dev->dev, "Failed to allocate control structure\n");
ret = -ENOMEM;
goto fail_disable;
}
lynx->pci_device = dev;
pci_set_drvdata(dev, lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
spin_lock_init(&lynx->client_list_lock);
INIT_LIST_HEAD(&lynx->client_list);
kref_init(&lynx->kref);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->registers = ioremap_nocache(pci_resource_start(dev, 0),
PCILYNX_MAX_REGISTER);
if (lynx->registers == NULL) {
dev_err(&dev->dev, "Failed to map registers\n");
ret = -ENOMEM;
goto fail_deallocate_lynx;
}
lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
sizeof(struct pcl), &lynx->rcv_pcl_bus);
lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
if (lynx->rcv_start_pcl == NULL ||
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->rcv_pcl == NULL ||
lynx->rcv_buffer == NULL) {
dev_err(&dev->dev, "Failed to allocate receive buffer\n");
ret = -ENOMEM;
goto fail_deallocate_buffers;
}
lynx->rcv_start_pcl->next = cpu_to_le32(lynx->rcv_pcl_bus);
lynx->rcv_pcl->next = cpu_to_le32(PCL_NEXT_INVALID);
lynx->rcv_pcl->async_error_next = cpu_to_le32(PCL_NEXT_INVALID);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->rcv_pcl->buffer[0].control =
cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044);
lynx->rcv_pcl->buffer[0].pointer =
cpu_to_le32(lynx->rcv_buffer_bus + 4);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
p = lynx->rcv_buffer_bus + 2048;
end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE;
for (i = 1; p < end; i++, p += 2048) {
lynx->rcv_pcl->buffer[i].control =
cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048);
lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
/* Fix buggy cards with autoboot pin not tied low: */
reg_write(lynx, DMA0_CHAN_CTRL, 0);
reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#if 0
/* now, looking for PHY register set */
if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
lynx->phyic.reg_1394a = 1;
PRINT(KERN_INFO, lynx->id,
"found 1394a conform PHY (using extended register set)");
lynx->phyic.vendor = get_phy_vendorid(lynx);
lynx->phyic.product = get_phy_productid(lynx);
} else {
lynx->phyic.reg_1394a = 0;
PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
#endif
/* Setup the general receive FIFO max size. */
reg_write(lynx, FIFO_SIZES, 255);
reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
reg_write(lynx, LINK_INT_ENABLE,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD |
LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK |
LINK_INT_AT_STUCK | LINK_INT_SNTRJ |
LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW |
LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW);
/* Disable the L flag in self ID packets. */
set_phy_reg(lynx, 4, 0);
/* Put this baby into snoop mode */
reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE);
run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
if (request_irq(dev->irq, irq_handler, IRQF_SHARED,
driver_name, lynx)) {
dev_err(&dev->dev,
"Failed to allocate shared interrupt %d\n", dev->irq);
ret = -EIO;
goto fail_deallocate_buffers;
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
lynx->misc.parent = &dev->dev;
lynx->misc.minor = MISC_DYNAMIC_MINOR;
lynx->misc.name = "nosy";
lynx->misc.fops = &nosy_ops;
mutex_lock(&card_mutex);
ret = misc_register(&lynx->misc);
if (ret) {
dev_err(&dev->dev, "Failed to register misc char device\n");
mutex_unlock(&card_mutex);
goto fail_free_irq;
}
list_add_tail(&lynx->link, &card_list);
mutex_unlock(&card_mutex);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
dev_info(&dev->dev,
"Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
return 0;
fail_free_irq:
reg_write(lynx, PCI_INT_ENABLE, 0);
free_irq(lynx->pci_device->irq, lynx);
fail_deallocate_buffers:
if (lynx->rcv_start_pcl)
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
if (lynx->rcv_pcl)
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
lynx->rcv_pcl, lynx->rcv_pcl_bus);
if (lynx->rcv_buffer)
pci_free_consistent(lynx->pci_device, PAGE_SIZE,
lynx->rcv_buffer, lynx->rcv_buffer_bus);
iounmap(lynx->registers);
fail_deallocate_lynx:
kfree(lynx);
fail_disable:
pci_disable_device(dev);
return ret;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
}
static struct pci_device_id pci_table[] = {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
{
.vendor = PCI_VENDOR_ID_TI,
.device = PCI_DEVICE_ID_TI_PCILYNX,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
},
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, pci_table);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
static struct pci_driver lynx_pci_driver = {
.name = driver_name,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
.id_table = pci_table,
.probe = add_card,
.remove = remove_card,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
};
module_pci_driver(lynx_pci_driver);
MODULE_AUTHOR("Kristian Hoegsberg");
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 16:26:33 +08:00
MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers");
MODULE_LICENSE("GPL");