OpenCloudOS-Kernel/arch/x86/kernel/kvmclock.c

338 lines
8.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* KVM paravirtual clock driver. A clocksource implementation
Copyright (C) 2008 Glauber de Oliveira Costa, Red Hat Inc.
*/
#include <linux/clocksource.h>
#include <linux/kvm_para.h>
#include <asm/pvclock.h>
#include <asm/msr.h>
#include <asm/apic.h>
#include <linux/percpu.h>
#include <linux/hardirq.h>
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
#include <linux/cpuhotplug.h>
x86: kvmclock: set scheduler clock stable If you try to enable NOHZ_FULL on a guest today, you'll get the following error when the guest tries to deactivate the scheduler tick: WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290() NO_HZ FULL will not work with unstable sched clock CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb #204 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events flush_to_ldisc ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002 ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8 0000000000000000 0000000000000003 0000000000000001 0000000000000001 Call Trace: <IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b [<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0 [<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290 [<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0 [<ffffffff810511c5>] irq_exit+0xc5/0x130 [<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60 [<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60 [<ffffffff8108bbc8>] __wake_up+0x48/0x60 [<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0 [<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70 [<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20 [<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120 [<ffffffff81064d05>] process_one_work+0x1d5/0x540 [<ffffffff81064c81>] ? process_one_work+0x151/0x540 [<ffffffff81065191>] worker_thread+0x121/0x470 [<ffffffff81065070>] ? process_one_work+0x540/0x540 [<ffffffff8106b4df>] kthread+0xef/0x110 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 [<ffffffff814ef4f2>] ret_from_fork+0x42/0x70 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 ---[ end trace 06e3507544a38866 ]--- However, it turns out that kvmclock does provide a stable sched_clock callback. So, let the scheduler know this which in turn makes NOHZ_FULL work in the guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-29 07:20:40 +08:00
#include <linux/sched.h>
#include <linux/sched/clock.h>
#include <linux/mm.h>
Merge branch 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Merge L1 Terminal Fault fixes from Thomas Gleixner: "L1TF, aka L1 Terminal Fault, is yet another speculative hardware engineering trainwreck. It's a hardware vulnerability which allows unprivileged speculative access to data which is available in the Level 1 Data Cache when the page table entry controlling the virtual address, which is used for the access, has the Present bit cleared or other reserved bits set. If an instruction accesses a virtual address for which the relevant page table entry (PTE) has the Present bit cleared or other reserved bits set, then speculative execution ignores the invalid PTE and loads the referenced data if it is present in the Level 1 Data Cache, as if the page referenced by the address bits in the PTE was still present and accessible. While this is a purely speculative mechanism and the instruction will raise a page fault when it is retired eventually, the pure act of loading the data and making it available to other speculative instructions opens up the opportunity for side channel attacks to unprivileged malicious code, similar to the Meltdown attack. While Meltdown breaks the user space to kernel space protection, L1TF allows to attack any physical memory address in the system and the attack works across all protection domains. It allows an attack of SGX and also works from inside virtual machines because the speculation bypasses the extended page table (EPT) protection mechanism. The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646 The mitigations provided by this pull request include: - Host side protection by inverting the upper address bits of a non present page table entry so the entry points to uncacheable memory. - Hypervisor protection by flushing L1 Data Cache on VMENTER. - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT by offlining the sibling CPU threads. The knobs are available on the kernel command line and at runtime via sysfs - Control knobs for the hypervisor mitigation, related to L1D flush and SMT control. The knobs are available on the kernel command line and at runtime via sysfs - Extensive documentation about L1TF including various degrees of mitigations. Thanks to all people who have contributed to this in various ways - patches, review, testing, backporting - and the fruitful, sometimes heated, but at the end constructive discussions. There is work in progress to provide other forms of mitigations, which might be less horrible performance wise for a particular kind of workloads, but this is not yet ready for consumption due to their complexity and limitations" * 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) x86/microcode: Allow late microcode loading with SMT disabled tools headers: Synchronise x86 cpufeatures.h for L1TF additions x86/mm/kmmio: Make the tracer robust against L1TF x86/mm/pat: Make set_memory_np() L1TF safe x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert x86/speculation/l1tf: Invert all not present mappings cpu/hotplug: Fix SMT supported evaluation KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry x86/speculation: Simplify sysfs report of VMX L1TF vulnerability Documentation/l1tf: Remove Yonah processors from not vulnerable list x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr() x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d x86: Don't include linux/irq.h from asm/hardirq.h x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d x86/irq: Demote irq_cpustat_t::__softirq_pending to u16 x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush() x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond' x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush() cpu/hotplug: detect SMT disabled by BIOS ...
2018-08-15 00:46:06 +08:00
#include <linux/slab.h>
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
#include <linux/set_memory.h>
#include <asm/hypervisor.h>
#include <asm/mem_encrypt.h>
#include <asm/x86_init.h>
#include <asm/kvmclock.h>
static int kvmclock __initdata = 1;
static int kvmclock_vsyscall __initdata = 1;
static int msr_kvm_system_time __ro_after_init = MSR_KVM_SYSTEM_TIME;
static int msr_kvm_wall_clock __ro_after_init = MSR_KVM_WALL_CLOCK;
static u64 kvm_sched_clock_offset __ro_after_init;
static int __init parse_no_kvmclock(char *arg)
{
kvmclock = 0;
return 0;
}
early_param("no-kvmclock", parse_no_kvmclock);
static int __init parse_no_kvmclock_vsyscall(char *arg)
{
kvmclock_vsyscall = 0;
return 0;
}
early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall);
/* Aligned to page sizes to match whats mapped via vsyscalls to userspace */
#define HV_CLOCK_SIZE (sizeof(struct pvclock_vsyscall_time_info) * NR_CPUS)
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
#define HVC_BOOT_ARRAY_SIZE \
(PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info))
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
static struct pvclock_vsyscall_time_info
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE);
static struct pvclock_wall_clock wall_clock __bss_decrypted;
static struct pvclock_vsyscall_time_info *hvclock_mem;
DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu);
EXPORT_PER_CPU_SYMBOL_GPL(hv_clock_per_cpu);
/*
* The wallclock is the time of day when we booted. Since then, some time may
* have elapsed since the hypervisor wrote the data. So we try to account for
* that with system time
*/
static void kvm_get_wallclock(struct timespec64 *now)
{
wrmsrl(msr_kvm_wall_clock, slow_virt_to_phys(&wall_clock));
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
preempt_disable();
pvclock_read_wallclock(&wall_clock, this_cpu_pvti(), now);
preempt_enable();
}
static int kvm_set_wallclock(const struct timespec64 *now)
{
return -ENODEV;
}
static u64 kvm_clock_read(void)
{
u64 ret;
preempt_disable_notrace();
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
ret = pvclock_clocksource_read(this_cpu_pvti());
preempt_enable_notrace();
return ret;
}
static u64 kvm_clock_get_cycles(struct clocksource *cs)
{
return kvm_clock_read();
}
static u64 kvm_sched_clock_read(void)
{
return kvm_clock_read() - kvm_sched_clock_offset;
}
static inline void kvm_sched_clock_init(bool stable)
{
if (!stable)
clear_sched_clock_stable();
kvm_sched_clock_offset = kvm_clock_read();
pv_ops.time.sched_clock = kvm_sched_clock_read;
pr_info("kvm-clock: using sched offset of %llu cycles",
kvm_sched_clock_offset);
BUILD_BUG_ON(sizeof(kvm_sched_clock_offset) >
sizeof(((struct pvclock_vcpu_time_info *)NULL)->system_time));
}
/*
* If we don't do that, there is the possibility that the guest
* will calibrate under heavy load - thus, getting a lower lpj -
* and execute the delays themselves without load. This is wrong,
* because no delay loop can finish beforehand.
* Any heuristics is subject to fail, because ultimately, a large
* poll of guests can be running and trouble each other. So we preset
* lpj here
*/
static unsigned long kvm_get_tsc_khz(void)
{
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
return pvclock_tsc_khz(this_cpu_pvti());
}
static void __init kvm_get_preset_lpj(void)
{
unsigned long khz;
u64 lpj;
khz = kvm_get_tsc_khz();
lpj = ((u64)khz * 1000);
do_div(lpj, HZ);
preset_lpj = lpj;
}
bool kvm_check_and_clear_guest_paused(void)
{
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
struct pvclock_vsyscall_time_info *src = this_cpu_hvclock();
bool ret = false;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
if (!src)
return ret;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
if ((src->pvti.flags & PVCLOCK_GUEST_STOPPED) != 0) {
src->pvti.flags &= ~PVCLOCK_GUEST_STOPPED;
pvclock_touch_watchdogs();
ret = true;
}
return ret;
}
struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
EXPORT_SYMBOL_GPL(kvm_clock);
static void kvm_register_clock(char *txt)
{
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
struct pvclock_vsyscall_time_info *src = this_cpu_hvclock();
u64 pa;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
if (!src)
return;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
pa = slow_virt_to_phys(&src->pvti) | 0x01ULL;
wrmsrl(msr_kvm_system_time, pa);
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
pr_info("kvm-clock: cpu %d, msr %llx, %s", smp_processor_id(), pa, txt);
}
static void kvm_save_sched_clock_state(void)
{
}
static void kvm_restore_sched_clock_state(void)
{
kvm_register_clock("primary cpu clock, resume");
}
#ifdef CONFIG_X86_LOCAL_APIC
x86: delete __cpuinit usage from all x86 files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 06:23:59 +08:00
static void kvm_setup_secondary_clock(void)
{
kvm_register_clock("secondary cpu clock");
}
#endif
void kvmclock_disable(void)
{
native_write_msr(msr_kvm_system_time, 0, 0);
}
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
static void __init kvmclock_init_mem(void)
{
unsigned long ncpus;
unsigned int order;
struct page *p;
int r;
if (HVC_BOOT_ARRAY_SIZE >= num_possible_cpus())
return;
ncpus = num_possible_cpus() - HVC_BOOT_ARRAY_SIZE;
order = get_order(ncpus * sizeof(*hvclock_mem));
p = alloc_pages(GFP_KERNEL, order);
if (!p) {
pr_warn("%s: failed to alloc %d pages", __func__, (1U << order));
return;
}
hvclock_mem = page_address(p);
/*
* hvclock is shared between the guest and the hypervisor, must
* be mapped decrypted.
*/
if (sev_active()) {
r = set_memory_decrypted((unsigned long) hvclock_mem,
1UL << order);
if (r) {
__free_pages(p, order);
hvclock_mem = NULL;
pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n");
return;
}
}
memset(hvclock_mem, 0, PAGE_SIZE << order);
}
static int __init kvm_setup_vsyscall_timeinfo(void)
{
#ifdef CONFIG_X86_64
u8 flags;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
if (!per_cpu(hv_clock_per_cpu, 0) || !kvmclock_vsyscall)
return 0;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
flags = pvclock_read_flags(&hv_clock_boot[0].pvti);
if (!(flags & PVCLOCK_TSC_STABLE_BIT))
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
return 0;
kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK;
#endif
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
kvmclock_init_mem();
return 0;
}
early_initcall(kvm_setup_vsyscall_timeinfo);
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
static int kvmclock_setup_percpu(unsigned int cpu)
{
struct pvclock_vsyscall_time_info *p = per_cpu(hv_clock_per_cpu, cpu);
/*
* The per cpu area setup replicates CPU0 data to all cpu
* pointers. So carefully check. CPU0 has been set up in init
* already.
*/
if (!cpu || (p && p != per_cpu(hv_clock_per_cpu, 0)))
return 0;
/* Use the static page for the first CPUs, allocate otherwise */
if (cpu < HVC_BOOT_ARRAY_SIZE)
p = &hv_clock_boot[cpu];
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
else if (hvclock_mem)
p = hvclock_mem + cpu - HVC_BOOT_ARRAY_SIZE;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
else
x86/kvm: Use __bss_decrypted attribute in shared variables The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:59 +08:00
return -ENOMEM;
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
per_cpu(hv_clock_per_cpu, cpu) = p;
return p ? 0 : -ENOMEM;
}
void __init kvmclock_init(void)
{
x86: kvmclock: set scheduler clock stable If you try to enable NOHZ_FULL on a guest today, you'll get the following error when the guest tries to deactivate the scheduler tick: WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290() NO_HZ FULL will not work with unstable sched clock CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb #204 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events flush_to_ldisc ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002 ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8 0000000000000000 0000000000000003 0000000000000001 0000000000000001 Call Trace: <IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b [<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0 [<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290 [<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0 [<ffffffff810511c5>] irq_exit+0xc5/0x130 [<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60 [<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60 [<ffffffff8108bbc8>] __wake_up+0x48/0x60 [<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0 [<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70 [<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20 [<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120 [<ffffffff81064d05>] process_one_work+0x1d5/0x540 [<ffffffff81064c81>] ? process_one_work+0x151/0x540 [<ffffffff81065191>] worker_thread+0x121/0x470 [<ffffffff81065070>] ? process_one_work+0x540/0x540 [<ffffffff8106b4df>] kthread+0xef/0x110 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 [<ffffffff814ef4f2>] ret_from_fork+0x42/0x70 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 ---[ end trace 06e3507544a38866 ]--- However, it turns out that kvmclock does provide a stable sched_clock callback. So, let the scheduler know this which in turn makes NOHZ_FULL work in the guest. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-29 07:20:40 +08:00
u8 flags;
if (!kvm_para_available() || !kvmclock)
return;
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) {
msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
} else if (!kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
return;
}
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
if (cpuhp_setup_state(CPUHP_BP_PREPARE_DYN, "kvmclock:setup_percpu",
kvmclock_setup_percpu, NULL) < 0) {
return;
}
pr_info("kvm-clock: Using msrs %x and %x",
msr_kvm_system_time, msr_kvm_wall_clock);
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
this_cpu_write(hv_clock_per_cpu, &hv_clock_boot[0]);
kvm_register_clock("primary cpu clock");
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
pvclock_set_pvti_cpu0_va(hv_clock_boot);
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT);
x86/kvmclock: Switch kvmclock data to a PER_CPU variable The previous removal of the memblock dependency from kvmclock introduced a static data array sized 64bytes * CONFIG_NR_CPUS. That's wasteful on large systems when kvmclock is not used. Replace it with: - A static page sized array of pvclock data. It's page sized because the pvclock data of the boot cpu is mapped into the VDSO so otherwise random other data would be exposed to the vDSO - A PER_CPU variable of pvclock data pointers. This is used to access the pcvlock data storage on each CPU. The setup is done in two stages: - Early boot stores the pointer to the static page for the boot CPU in the per cpu data. - In the preparatory stage of CPU hotplug assign either an element of the static array (when the CPU number is in that range) or allocate memory and initialize the per cpu pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Link: https://lkml.kernel.org/r/20180719205545.16512-8-pasha.tatashin@oracle.com
2018-07-20 04:55:26 +08:00
flags = pvclock_read_flags(&hv_clock_boot[0].pvti);
kvm_sched_clock_init(flags & PVCLOCK_TSC_STABLE_BIT);
x86_platform.calibrate_tsc = kvm_get_tsc_khz;
x86, clock: Fix kvm guest tsc initialization When booting a kvm guest on AMD with the latest kernel the following messages are displayed in the boot log: tsc: Unable to calibrate against PIT tsc: HPET/PMTIMER calibration failed aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") introduced a change to account for a difference in cpu and tsc frequencies for Intel SKL processors. Before this change the native tsc set x86_platform.calibrate_tsc to native_calibrate_tsc() which is a hardware calibration of the tsc, and in tsc_init() executed tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; The kvm code changed x86_platform.calibrate_tsc to kvm_get_tsc_khz() and executed the same tsc_init() function. This meant that KVM guests did not execute the native hardware calibration function. After aa297292d708, there are separate native calibrations for cpu_khz and tsc_khz. The code sets x86_platform.calibrate_tsc to native_calibrate_tsc() which is now an Intel specific calibration function, and x86_platform.calibrate_cpu to native_calibrate_cpu() which is the "old" native_calibrate_tsc() function (ie, the native hardware calibration function). tsc_init() now does cpu_khz = x86_platform.calibrate_cpu(); tsc_khz = x86_platform.calibrate_tsc(); if (tsc_khz == 0) tsc_khz = cpu_khz; else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz) cpu_khz = tsc_khz; The kvm code should not call the hardware initialization in native_calibrate_cpu(), as it isn't applicable for kvm and it didn't do that prior to aa297292d708. This patch resolves this issue by setting x86_platform.calibrate_cpu to kvm_get_tsc_khz(). v2: I had originally set x86_platform.calibrate_cpu to cpu_khz_from_cpuid(), however, pbonzini pointed out that the CPUID leaf in that function is not available in KVM. I have changed the function pointer to kvm_get_tsc_khz(). Fixes: aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Len Brown <len.brown@intel.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Christopher S. Hall" <christopher.s.hall@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08 22:15:28 +08:00
x86_platform.calibrate_cpu = kvm_get_tsc_khz;
x86_platform.get_wallclock = kvm_get_wallclock;
x86_platform.set_wallclock = kvm_set_wallclock;
#ifdef CONFIG_X86_LOCAL_APIC
x86_cpuinit.early_percpu_clock_init = kvm_setup_secondary_clock;
#endif
x86_platform.save_sched_clock_state = kvm_save_sched_clock_state;
x86_platform.restore_sched_clock_state = kvm_restore_sched_clock_state;
kvm_get_preset_lpj();
/*
* X86_FEATURE_NONSTOP_TSC is TSC runs at constant rate
* with P/T states and does not stop in deep C-states.
*
* Invariant TSC exposed by host means kvmclock is not necessary:
* can use TSC as clocksource.
*
*/
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) &&
boot_cpu_has(X86_FEATURE_NONSTOP_TSC) &&
!check_tsc_unstable())
kvm_clock.rating = 299;
clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
pv_info.name = "KVM";
}