OpenCloudOS-Kernel/virt/kvm/pfncache.c

318 lines
7.4 KiB
C
Raw Normal View History

KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Kernel-based Virtual Machine driver for Linux
*
* This module enables kernel and guest-mode vCPU access to guest physical
* memory with suitable invalidation mechanisms.
*
* Copyright © 2021 Amazon.com, Inc. or its affiliates.
*
* Authors:
* David Woodhouse <dwmw2@infradead.org>
*/
#include <linux/kvm_host.h>
#include <linux/kvm.h>
#include <linux/highmem.h>
#include <linux/module.h>
#include <linux/errno.h>
#include "kvm_mm.h"
/*
* MMU notifier 'invalidate_range_start' hook.
*/
void gfn_to_pfn_cache_invalidate_start(struct kvm *kvm, unsigned long start,
unsigned long end, bool may_block)
{
DECLARE_BITMAP(vcpu_bitmap, KVM_MAX_VCPUS);
struct gfn_to_pfn_cache *gpc;
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-24 00:53:02 +08:00
bool evict_vcpus = false;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
spin_lock(&kvm->gpc_lock);
list_for_each_entry(gpc, &kvm->gpc_list, list) {
write_lock_irq(&gpc->lock);
/* Only a single page so no need to care about length */
if (gpc->valid && !is_error_noslot_pfn(gpc->pfn) &&
gpc->uhva >= start && gpc->uhva < end) {
gpc->valid = false;
/*
* If a guest vCPU could be using the physical address,
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-24 00:53:02 +08:00
* it needs to be forced out of guest mode.
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
*/
if (gpc->usage & KVM_GUEST_USES_PFN) {
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-24 00:53:02 +08:00
if (!evict_vcpus) {
evict_vcpus = true;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
bitmap_zero(vcpu_bitmap, KVM_MAX_VCPUS);
}
__set_bit(gpc->vcpu->vcpu_idx, vcpu_bitmap);
}
}
write_unlock_irq(&gpc->lock);
}
spin_unlock(&kvm->gpc_lock);
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-24 00:53:02 +08:00
if (evict_vcpus) {
/*
* KVM needs to ensure the vCPU is fully out of guest context
* before allowing the invalidation to continue.
*/
unsigned int req = KVM_REQ_OUTSIDE_GUEST_MODE;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
bool called;
/*
* If the OOM reaper is active, then all vCPUs should have
* been stopped already, so perform the request without
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-24 00:53:02 +08:00
* KVM_REQUEST_WAIT and be sad if any needed to be IPI'd.
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
*/
if (!may_block)
req &= ~KVM_REQUEST_WAIT;
called = kvm_make_vcpus_request_mask(kvm, req, vcpu_bitmap);
WARN_ON_ONCE(called && !may_block);
}
}
bool kvm_gfn_to_pfn_cache_check(struct kvm *kvm, struct gfn_to_pfn_cache *gpc,
gpa_t gpa, unsigned long len)
{
struct kvm_memslots *slots = kvm_memslots(kvm);
if ((gpa & ~PAGE_MASK) + len > PAGE_SIZE)
return false;
if (gpc->gpa != gpa || gpc->generation != slots->generation ||
kvm_is_error_hva(gpc->uhva))
return false;
if (!gpc->valid)
return false;
return true;
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_check);
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
static void __release_gpc(struct kvm *kvm, kvm_pfn_t pfn, void *khva, gpa_t gpa)
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
{
/* Unmap the old page if it was mapped before, and release it */
if (!is_error_noslot_pfn(pfn)) {
if (khva) {
if (pfn_valid(pfn))
kunmap(pfn_to_page(pfn));
#ifdef CONFIG_HAS_IOMEM
else
memunmap(khva);
#endif
}
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
kvm_release_pfn(pfn, false);
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
}
}
static kvm_pfn_t hva_to_pfn_retry(struct kvm *kvm, unsigned long uhva)
{
unsigned long mmu_seq;
kvm_pfn_t new_pfn;
int retry;
do {
mmu_seq = kvm->mmu_notifier_seq;
smp_rmb();
/* We always request a writeable mapping */
new_pfn = hva_to_pfn(uhva, false, NULL, true, NULL);
if (is_error_noslot_pfn(new_pfn))
break;
KVM_MMU_READ_LOCK(kvm);
retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva);
KVM_MMU_READ_UNLOCK(kvm);
if (!retry)
break;
cond_resched();
} while (1);
return new_pfn;
}
int kvm_gfn_to_pfn_cache_refresh(struct kvm *kvm, struct gfn_to_pfn_cache *gpc,
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
gpa_t gpa, unsigned long len)
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
{
struct kvm_memslots *slots = kvm_memslots(kvm);
unsigned long page_offset = gpa & ~PAGE_MASK;
kvm_pfn_t old_pfn, new_pfn;
unsigned long old_uhva;
gpa_t old_gpa;
void *old_khva;
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
bool old_valid;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
int ret = 0;
/*
* If must fit within a single page. The 'len' argument is
* only to enforce that.
*/
if (page_offset + len > PAGE_SIZE)
return -EINVAL;
write_lock_irq(&gpc->lock);
old_gpa = gpc->gpa;
old_pfn = gpc->pfn;
old_khva = gpc->khva - offset_in_page(gpc->khva);
old_uhva = gpc->uhva;
old_valid = gpc->valid;
/* If the userspace HVA is invalid, refresh that first */
if (gpc->gpa != gpa || gpc->generation != slots->generation ||
kvm_is_error_hva(gpc->uhva)) {
gfn_t gfn = gpa_to_gfn(gpa);
gpc->gpa = gpa;
gpc->generation = slots->generation;
gpc->memslot = __gfn_to_memslot(slots, gfn);
gpc->uhva = gfn_to_hva_memslot(gpc->memslot, gfn);
if (kvm_is_error_hva(gpc->uhva)) {
gpc->pfn = KVM_PFN_ERR_FAULT;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
ret = -EFAULT;
goto out;
}
gpc->uhva += page_offset;
}
/*
* If the userspace HVA changed or the PFN was already invalid,
* drop the lock and do the HVA to PFN lookup again.
*/
if (!old_valid || old_uhva != gpc->uhva) {
unsigned long uhva = gpc->uhva;
void *new_khva = NULL;
/* Placeholders for "hva is valid but not yet mapped" */
gpc->pfn = KVM_PFN_ERR_FAULT;
gpc->khva = NULL;
gpc->valid = true;
write_unlock_irq(&gpc->lock);
new_pfn = hva_to_pfn_retry(kvm, uhva);
if (is_error_noslot_pfn(new_pfn)) {
ret = -EFAULT;
goto map_done;
}
if (gpc->usage & KVM_HOST_USES_PFN) {
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
if (new_pfn == old_pfn) {
new_khva = old_khva;
old_pfn = KVM_PFN_ERR_FAULT;
old_khva = NULL;
} else if (pfn_valid(new_pfn)) {
new_khva = kmap(pfn_to_page(new_pfn));
#ifdef CONFIG_HAS_IOMEM
} else {
new_khva = memremap(pfn_to_hpa(new_pfn), PAGE_SIZE, MEMREMAP_WB);
#endif
}
if (new_khva)
new_khva += page_offset;
else
ret = -EFAULT;
}
map_done:
write_lock_irq(&gpc->lock);
if (ret) {
gpc->valid = false;
gpc->pfn = KVM_PFN_ERR_FAULT;
gpc->khva = NULL;
} else {
/* At this point, gpc->valid may already have been cleared */
gpc->pfn = new_pfn;
gpc->khva = new_khva;
}
} else {
/* If the HVA→PFN mapping was already valid, don't unmap it. */
old_pfn = KVM_PFN_ERR_FAULT;
old_khva = NULL;
}
out:
write_unlock_irq(&gpc->lock);
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
__release_gpc(kvm, old_pfn, old_khva, old_gpa);
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
return ret;
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_refresh);
void kvm_gfn_to_pfn_cache_unmap(struct kvm *kvm, struct gfn_to_pfn_cache *gpc)
{
void *old_khva;
kvm_pfn_t old_pfn;
gpa_t old_gpa;
write_lock_irq(&gpc->lock);
gpc->valid = false;
old_khva = gpc->khva - offset_in_page(gpc->khva);
old_gpa = gpc->gpa;
old_pfn = gpc->pfn;
/*
* We can leave the GPA uHVA map cache intact but the PFN
* lookup will need to be redone even for the same page.
*/
gpc->khva = NULL;
gpc->pfn = KVM_PFN_ERR_FAULT;
write_unlock_irq(&gpc->lock);
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
__release_gpc(kvm, old_pfn, old_khva, old_gpa);
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_unmap);
int kvm_gfn_to_pfn_cache_init(struct kvm *kvm, struct gfn_to_pfn_cache *gpc,
struct kvm_vcpu *vcpu, enum pfn_cache_usage usage,
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
gpa_t gpa, unsigned long len)
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
{
WARN_ON_ONCE(!usage || (usage & KVM_GUEST_AND_HOST_USE_PFN) != usage);
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
if (!gpc->active) {
rwlock_init(&gpc->lock);
gpc->khva = NULL;
gpc->pfn = KVM_PFN_ERR_FAULT;
gpc->uhva = KVM_HVA_ERR_BAD;
gpc->vcpu = vcpu;
gpc->usage = usage;
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
gpc->valid = false;
gpc->active = true;
spin_lock(&kvm->gpc_lock);
list_add(&gpc->list, &kvm->gpc_list);
spin_unlock(&kvm->gpc_lock);
}
KVM: Remove dirty handling from gfn_to_pfn_cache completely It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03 23:41:12 +08:00
return kvm_gfn_to_pfn_cache_refresh(kvm, gpc, gpa, len);
KVM: Reinstate gfn_to_pfn_cache with invalidation support This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-11 00:36:21 +08:00
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_init);
void kvm_gfn_to_pfn_cache_destroy(struct kvm *kvm, struct gfn_to_pfn_cache *gpc)
{
if (gpc->active) {
spin_lock(&kvm->gpc_lock);
list_del(&gpc->list);
spin_unlock(&kvm->gpc_lock);
kvm_gfn_to_pfn_cache_unmap(kvm, gpc);
gpc->active = false;
}
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_pfn_cache_destroy);