UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/boot/dts/currituck.dts

243 lines
7.3 KiB
Plaintext
Raw Normal View History

powerpc/47x: Add support for the new IBM currituck platform Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-01 05:39:24 +08:00
/*
* Device Tree Source for IBM Embedded PPC 476 Platform
*
* Copyright © 2011 Tony Breeds IBM Corporation
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/memreserve/ 0x01f00000 0x00100000; // spin table
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "ibm,currituck";
compatible = "ibm,currituck";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
serial0 = &UART0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,476";
reg = <0>;
clock-frequency = <1600000000>; // 1.6 GHz
timebase-frequency = <100000000>; // 100Mhz
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "ok";
};
cpu@1 {
device_type = "cpu";
model = "PowerPC,476";
reg = <1>;
clock-frequency = <1600000000>; // 1.6 GHz
timebase-frequency = <100000000>; // 100Mhz
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0x0 0x01f00000>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
};
MPIC: interrupt-controller {
compatible = "chrp,open-pic";
interrupt-controller;
dcr-reg = <0xffc00000 0x00040000>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
plb {
compatible = "ibm,plb6";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clock-frequency = <200000000>; // 200Mhz
POB0: opb {
compatible = "ibm,opb-4xx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full
* 32-bit range
*/
ranges = <0x00000000 0x00000200 0x00000000 0x80000000
0x80000000 0x00000200 0x80000000 0x80000000>;
clock-frequency = <100000000>;
UART0: serial@10000000 {
device_type = "serial";
compatible = "ns16750", "ns16550";
reg = <0x10000000 0x00000008>;
virtual-reg = <0xe1000000>;
clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
current-speed = <115200>;
interrupt-parent = <&MPIC>;
interrupts = <34 2>;
};
powerpc: Update currituck pci/usb fixup for new board revision The currituck board uses a different IRQ for the pci usb host controller depending on the board revision. This patch adds support for newer board revisions by retrieving the board revision from the FPGA and mapping the appropriate IRQ. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-09 08:42:13 +08:00
FPGA0: fpga@50000000 {
compatible = "ibm,currituck-fpga";
reg = <0x50000000 0x4>;
};
powerpc/47x: Add support for the new IBM currituck platform Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-01 05:39:24 +08:00
IIC0: i2c@00000000 {
compatible = "ibm,iic-currituck", "ibm,iic";
reg = <0x0 0x00000014>;
interrupt-parent = <&MPIC>;
interrupts = <79 2>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t80", "m41st85";
reg = <0x68>;
};
};
};
PCIE0: pciex@10100000000 { // 4xGBIF1
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0x80 0x20>;
// pci_space < pci_addr > < cpu_addr > < size >
ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
};
PCIE1: pciex@30100000000 { // 4xGBIF0
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0x60 0x20>;
ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
};
PCIE2: pciex@38100000000 { // 2xGBIF0
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
primary;
port = <0x2>; /* port number */
reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
dcr-reg = <0xA0 0x20>;
ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
/* Inbound starting at 0 to memsize filled in by zImage */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
};
};
chosen {
linux,stdout-path = &UART0;
};
};