OpenCloudOS-Kernel/drivers/hwtracing/coresight/coresight-etm4x-core.c

1660 lines
46 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
*/
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/sysfs.h>
#include <linux/stat.h>
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/coresight.h>
#include <linux/coresight-pmu.h>
#include <linux/pm_wakeup.h>
#include <linux/amba/bus.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/perf_event.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <asm/sections.h>
#include <asm/local.h>
#include <asm/virt.h>
#include "coresight-etm4x.h"
#include "coresight-etm-perf.h"
static int boot_enable;
module_param(boot_enable, int, 0444);
MODULE_PARM_DESC(boot_enable, "Enable tracing on boot");
#define PARAM_PM_SAVE_FIRMWARE 0 /* save self-hosted state as per firmware */
#define PARAM_PM_SAVE_NEVER 1 /* never save any state */
#define PARAM_PM_SAVE_SELF_HOSTED 2 /* save self-hosted state only */
static int pm_save_enable = PARAM_PM_SAVE_FIRMWARE;
module_param(pm_save_enable, int, 0444);
MODULE_PARM_DESC(pm_save_enable,
"Save/restore state on power down: 1 = never, 2 = self-hosted");
static struct etmv4_drvdata *etmdrvdata[NR_CPUS];
static void etm4_set_default_config(struct etmv4_config *config);
static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
struct perf_event *event);
static u64 etm4_get_access_type(struct etmv4_config *config);
static enum cpuhp_state hp_online;
static void etm4_os_unlock(struct etmv4_drvdata *drvdata)
{
/* Writing 0 to TRCOSLAR unlocks the trace registers */
writel_relaxed(0x0, drvdata->base + TRCOSLAR);
drvdata->os_unlock = true;
isb();
}
static void etm4_os_lock(struct etmv4_drvdata *drvdata)
{
/* Writing 0x1 to TRCOSLAR locks the trace registers */
writel_relaxed(0x1, drvdata->base + TRCOSLAR);
drvdata->os_unlock = false;
isb();
}
static bool etm4_arch_supported(u8 arch)
{
coresight: etm4x: Add support to enable ETMv4.2 SDM845 has ETMv4.2 and can use the existing etm4x driver. But the current etm driver checks only for ETMv4.0 and errors out for other etm4x versions. This patch adds this missing support to enable SoC's with ETMv4x to use same driver by checking only the ETM architecture major version number. Without this change, we get below error during etm probe: / # dmesg | grep etm [ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22 [ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22 [ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22 [ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22 [ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22 [ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22 [ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22 [ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22 With this change, etm probe is successful: / # dmesg | grep etm [ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized [ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized [ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized [ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized [ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized [ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized [ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized [ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26 01:54:01 +08:00
/* Mask out the minor version number */
switch (arch & 0xf0) {
case ETM_ARCH_V4:
break;
default:
return false;
}
return true;
}
static int etm4_cpu_id(struct coresight_device *csdev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
return drvdata->cpu;
}
static int etm4_trace_id(struct coresight_device *csdev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
coresight: always use stashed trace id value in etm4_trace_id etm4_trace_id is not guaranteed to be executed on the CPU whose ETM is being accessed. This leads to exception similar to below one if the CPU whose ETM is being accessed is in deeper idle states. So it must be executed on the CPU whose ETM is being accessed. Unhandled fault: synchronous external abort (0x96000210) at 0xffff000008db4040 Internal error: : 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 5979 Comm: etm.sh Not tainted 4.7.0-rc3 #159 Hardware name: ARM Juno development board (r2) (DT) task: ffff80096dd34b00 ti: ffff80096dfe4000 task.ti: ffff80096dfe4000 PC is at etm4_trace_id+0x5c/0x90 LR is at etm4_trace_id+0x3c/0x90 Call trace: etm4_trace_id+0x5c/0x90 coresight_id_match+0x78/0xa8 bus_for_each_dev+0x60/0xa0 coresight_enable+0xc0/0x1b8 enable_source_store+0x3c/0x70 dev_attr_store+0x18/0x28 sysfs_kf_write+0x48/0x58 kernfs_fop_write+0x14c/0x1e0 __vfs_write+0x1c/0x100 vfs_write+0xa0/0x1b8 SyS_write+0x44/0xa0 el0_svc_naked+0x24/0x28 However, TRCTRACEIDR is not guaranteed to hold the previous programmed trace id if it enters deeper idle states. Further, the trace id that is computed in etm4_init_trace_id is programmed into TRCTRACEIDR only in etm4_enable_hw which happens much later in the sequence after coresight_id_match is executed from enable_source_store. This patch simplifies etm4_trace_id by returning the stashed trace id value similar to etm4_cpu_id. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-26 05:18:53 +08:00
return drvdata->trcid;
}
struct etm4_enable_arg {
struct etmv4_drvdata *drvdata;
int rc;
};
static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
{
int i, rc;
struct etmv4_config *config = &drvdata->config;
struct device *etm_dev = &drvdata->csdev->dev;
CS_UNLOCK(drvdata->base);
etm4_os_unlock(drvdata);
rc = coresight_claim_device_unlocked(drvdata->base);
if (rc)
goto done;
/* Disable the trace unit before programming trace registers */
writel_relaxed(0, drvdata->base + TRCPRGCTLR);
/* wait for TRCSTATR.IDLE to go up */
if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1))
dev_err(etm_dev,
"timeout while waiting for Idle Trace Status\n");
writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR);
writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR);
/* nothing specific implemented */
writel_relaxed(0x0, drvdata->base + TRCAUXCTLR);
writel_relaxed(config->eventctrl0, drvdata->base + TRCEVENTCTL0R);
writel_relaxed(config->eventctrl1, drvdata->base + TRCEVENTCTL1R);
writel_relaxed(config->stall_ctrl, drvdata->base + TRCSTALLCTLR);
writel_relaxed(config->ts_ctrl, drvdata->base + TRCTSCTLR);
writel_relaxed(config->syncfreq, drvdata->base + TRCSYNCPR);
writel_relaxed(config->ccctlr, drvdata->base + TRCCCCTLR);
writel_relaxed(config->bb_ctrl, drvdata->base + TRCBBCTLR);
writel_relaxed(drvdata->trcid, drvdata->base + TRCTRACEIDR);
writel_relaxed(config->vinst_ctrl, drvdata->base + TRCVICTLR);
writel_relaxed(config->viiectlr, drvdata->base + TRCVIIECTLR);
writel_relaxed(config->vissctlr,
drvdata->base + TRCVISSCTLR);
writel_relaxed(config->vipcssctlr,
drvdata->base + TRCVIPCSSCTLR);
for (i = 0; i < drvdata->nrseqstate - 1; i++)
writel_relaxed(config->seq_ctrl[i],
drvdata->base + TRCSEQEVRn(i));
writel_relaxed(config->seq_rst, drvdata->base + TRCSEQRSTEVR);
writel_relaxed(config->seq_state, drvdata->base + TRCSEQSTR);
writel_relaxed(config->ext_inp, drvdata->base + TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
writel_relaxed(config->cntrldvr[i],
drvdata->base + TRCCNTRLDVRn(i));
writel_relaxed(config->cntr_ctrl[i],
drvdata->base + TRCCNTCTLRn(i));
writel_relaxed(config->cntr_val[i],
drvdata->base + TRCCNTVRn(i));
}
/*
* Resource selector pair 0 is always implemented and reserved. As
* such start at 2.
*/
for (i = 2; i < drvdata->nr_resource * 2; i++)
writel_relaxed(config->res_ctrl[i],
drvdata->base + TRCRSCTLRn(i));
for (i = 0; i < drvdata->nr_ss_cmp; i++) {
/* always clear status bit on restart if using single-shot */
if (config->ss_ctrl[i] || config->ss_pe_cmp[i])
config->ss_status[i] &= ~BIT(31);
writel_relaxed(config->ss_ctrl[i],
drvdata->base + TRCSSCCRn(i));
writel_relaxed(config->ss_status[i],
drvdata->base + TRCSSCSRn(i));
writel_relaxed(config->ss_pe_cmp[i],
drvdata->base + TRCSSPCICRn(i));
}
for (i = 0; i < drvdata->nr_addr_cmp; i++) {
writeq_relaxed(config->addr_val[i],
drvdata->base + TRCACVRn(i));
writeq_relaxed(config->addr_acc[i],
drvdata->base + TRCACATRn(i));
}
for (i = 0; i < drvdata->numcidc; i++)
writeq_relaxed(config->ctxid_pid[i],
drvdata->base + TRCCIDCVRn(i));
writel_relaxed(config->ctxid_mask0, drvdata->base + TRCCIDCCTLR0);
writel_relaxed(config->ctxid_mask1, drvdata->base + TRCCIDCCTLR1);
for (i = 0; i < drvdata->numvmidc; i++)
writeq_relaxed(config->vmid_val[i],
drvdata->base + TRCVMIDCVRn(i));
writel_relaxed(config->vmid_mask0, drvdata->base + TRCVMIDCCTLR0);
writel_relaxed(config->vmid_mask1, drvdata->base + TRCVMIDCCTLR1);
if (!drvdata->skip_power_up) {
/*
* Request to keep the trace unit powered and also
* emulation of powerdown
*/
writel_relaxed(readl_relaxed(drvdata->base + TRCPDCR) |
TRCPDCR_PU, drvdata->base + TRCPDCR);
}
/* Enable the trace unit */
writel_relaxed(1, drvdata->base + TRCPRGCTLR);
/* wait for TRCSTATR.IDLE to go back down to '0' */
if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0))
dev_err(etm_dev,
"timeout while waiting for Idle Trace Status\n");
/*
* As recommended by section 4.3.7 ("Synchronization when using the
* memory-mapped interface") of ARM IHI 0064D
*/
dsb(sy);
isb();
done:
CS_LOCK(drvdata->base);
dev_dbg(etm_dev, "cpu: %d enable smp call done: %d\n",
drvdata->cpu, rc);
return rc;
}
static void etm4_enable_hw_smp_call(void *info)
{
struct etm4_enable_arg *arg = info;
if (WARN_ON(!arg))
return;
arg->rc = etm4_enable_hw(arg->drvdata);
}
/*
* The goal of function etm4_config_timestamp_event() is to configure a
* counter that will tell the tracer to emit a timestamp packet when it
* reaches zero. This is done in order to get a more fine grained idea
* of when instructions are executed so that they can be correlated
* with execution on other CPUs.
*
* To do this the counter itself is configured to self reload and
* TRCRSCTLR1 (always true) used to get the counter to decrement. From
* there a resource selector is configured with the counter and the
* timestamp control register to use the resource selector to trigger the
* event that will insert a timestamp packet in the stream.
*/
static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata)
{
int ctridx, ret = -EINVAL;
int counter, rselector;
u32 val = 0;
struct etmv4_config *config = &drvdata->config;
/* No point in trying if we don't have at least one counter */
if (!drvdata->nr_cntr)
goto out;
/* Find a counter that hasn't been initialised */
for (ctridx = 0; ctridx < drvdata->nr_cntr; ctridx++)
if (config->cntr_val[ctridx] == 0)
break;
/* All the counters have been configured already, bail out */
if (ctridx == drvdata->nr_cntr) {
pr_debug("%s: no available counter found\n", __func__);
ret = -ENOSPC;
goto out;
}
/*
* Searching for an available resource selector to use, starting at
* '2' since every implementation has at least 2 resource selector.
* ETMIDR4 gives the number of resource selector _pairs_,
* hence multiply by 2.
*/
for (rselector = 2; rselector < drvdata->nr_resource * 2; rselector++)
if (!config->res_ctrl[rselector])
break;
if (rselector == drvdata->nr_resource * 2) {
pr_debug("%s: no available resource selector found\n",
__func__);
ret = -ENOSPC;
goto out;
}
/* Remember what counter we used */
counter = 1 << ctridx;
/*
* Initialise original and reload counter value to the smallest
* possible value in order to get as much precision as we can.
*/
config->cntr_val[ctridx] = 1;
config->cntrldvr[ctridx] = 1;
/* Set the trace counter control register */
val = 0x1 << 16 | /* Bit 16, reload counter automatically */
0x0 << 7 | /* Select single resource selector */
0x1; /* Resource selector 1, i.e always true */
config->cntr_ctrl[ctridx] = val;
val = 0x2 << 16 | /* Group 0b0010 - Counter and sequencers */
counter << 0; /* Counter to use */
config->res_ctrl[rselector] = val;
val = 0x0 << 7 | /* Select single resource selector */
rselector; /* Resource selector */
config->ts_ctrl = val;
ret = 0;
out:
return ret;
}
static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
struct perf_event *event)
{
int ret = 0;
struct etmv4_config *config = &drvdata->config;
struct perf_event_attr *attr = &event->attr;
if (!attr) {
ret = -EINVAL;
goto out;
}
/* Clear configuration from previous run */
memset(config, 0, sizeof(struct etmv4_config));
if (attr->exclude_kernel)
config->mode = ETM_MODE_EXCL_KERN;
if (attr->exclude_user)
config->mode = ETM_MODE_EXCL_USER;
/* Always start from the default config */
etm4_set_default_config(config);
/* Configure filters specified on the perf cmd line, if any. */
ret = etm4_set_event_filters(drvdata, event);
if (ret)
goto out;
/* Go from generic option to ETMv4 specifics */
if (attr->config & BIT(ETM_OPT_CYCACC)) {
config->cfg |= BIT(4);
/* TRM: Must program this for cycacc to work */
config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
}
if (attr->config & BIT(ETM_OPT_TS)) {
/*
* Configure timestamps to be emitted at regular intervals in
* order to correlate instructions executed on different CPUs
* (CPU-wide trace scenarios).
*/
ret = etm4_config_timestamp_event(drvdata);
/*
* No need to go further if timestamp intervals can't
* be configured.
*/
if (ret)
goto out;
/* bit[11], Global timestamp tracing bit */
config->cfg |= BIT(11);
}
if (attr->config & BIT(ETM_OPT_CTXTID))
/* bit[6], Context ID tracing bit */
config->cfg |= BIT(ETM4_CFG_BIT_CTXTID);
/* return stack - enable if selected and supported */
if ((attr->config & BIT(ETM_OPT_RETSTK)) && drvdata->retstack)
/* bit[12], Return stack enable bit */
config->cfg |= BIT(12);
out:
return ret;
}
static int etm4_enable_perf(struct coresight_device *csdev,
struct perf_event *event)
{
int ret = 0;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) {
ret = -EINVAL;
goto out;
}
/* Configure the tracer based on the session's specifics */
ret = etm4_parse_event_config(drvdata, event);
if (ret)
goto out;
/* And enable it */
ret = etm4_enable_hw(drvdata);
out:
return ret;
}
static int etm4_enable_sysfs(struct coresight_device *csdev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
struct etm4_enable_arg arg = { };
int ret;
spin_lock(&drvdata->spinlock);
/*
* Executing etm4_enable_hw on the cpu whose ETM is being enabled
* ensures that register writes occur when cpu is powered.
*/
arg.drvdata = drvdata;
ret = smp_call_function_single(drvdata->cpu,
etm4_enable_hw_smp_call, &arg, 1);
if (!ret)
ret = arg.rc;
if (!ret)
drvdata->sticky_enable = true;
spin_unlock(&drvdata->spinlock);
if (!ret)
dev_dbg(&csdev->dev, "ETM tracing enabled\n");
return ret;
}
static int etm4_enable(struct coresight_device *csdev,
struct perf_event *event, u32 mode)
{
int ret;
u32 val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode);
/* Someone is already using the tracer */
if (val)
return -EBUSY;
switch (mode) {
case CS_MODE_SYSFS:
ret = etm4_enable_sysfs(csdev);
break;
case CS_MODE_PERF:
ret = etm4_enable_perf(csdev, event);
break;
default:
ret = -EINVAL;
}
/* The tracer didn't start */
if (ret)
local_set(&drvdata->mode, CS_MODE_DISABLED);
return ret;
}
static void etm4_disable_hw(void *info)
{
u32 control;
struct etmv4_drvdata *drvdata = info;
struct etmv4_config *config = &drvdata->config;
struct device *etm_dev = &drvdata->csdev->dev;
int i;
CS_UNLOCK(drvdata->base);
if (!drvdata->skip_power_up) {
/* power can be removed from the trace unit now */
control = readl_relaxed(drvdata->base + TRCPDCR);
control &= ~TRCPDCR_PU;
writel_relaxed(control, drvdata->base + TRCPDCR);
}
control = readl_relaxed(drvdata->base + TRCPRGCTLR);
/* EN, bit[0] Trace unit enable bit */
control &= ~0x1;
/*
* Make sure everything completes before disabling, as recommended
* by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
* SSTATUS") of ARM IHI 0064D
*/
dsb(sy);
isb();
writel_relaxed(control, drvdata->base + TRCPRGCTLR);
/* wait for TRCSTATR.PMSTABLE to go to '1' */
if (coresight_timeout(drvdata->base, TRCSTATR,
TRCSTATR_PMSTABLE_BIT, 1))
dev_err(etm_dev,
"timeout while waiting for PM stable Trace Status\n");
/* read the status of the single shot comparators */
for (i = 0; i < drvdata->nr_ss_cmp; i++) {
config->ss_status[i] =
readl_relaxed(drvdata->base + TRCSSCSRn(i));
}
/* read back the current counter values */
for (i = 0; i < drvdata->nr_cntr; i++) {
config->cntr_val[i] =
readl_relaxed(drvdata->base + TRCCNTVRn(i));
}
coresight_disclaim_device_unlocked(drvdata->base);
CS_LOCK(drvdata->base);
dev_dbg(&drvdata->csdev->dev,
"cpu: %d disable smp call done\n", drvdata->cpu);
}
static int etm4_disable_perf(struct coresight_device *csdev,
struct perf_event *event)
{
u32 control;
struct etm_filters *filters = event->hw.addr_filters;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id()))
return -EINVAL;
etm4_disable_hw(drvdata);
/*
* Check if the start/stop logic was active when the unit was stopped.
* That way we can re-enable the start/stop logic when the process is
* scheduled again. Configuration of the start/stop logic happens in
* function etm4_set_event_filters().
*/
control = readl_relaxed(drvdata->base + TRCVICTLR);
/* TRCVICTLR::SSSTATUS, bit[9] */
filters->ssstatus = (control & BIT(9));
return 0;
}
static void etm4_disable_sysfs(struct coresight_device *csdev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
/*
* Taking hotplug lock here protects from clocks getting disabled
* with tracing being left on (crash scenario) if user disable occurs
* after cpu online mask indicates the cpu is offline but before the
* DYING hotplug callback is serviced by the ETM driver.
*/
cpus_read_lock();
spin_lock(&drvdata->spinlock);
/*
* Executing etm4_disable_hw on the cpu whose ETM is being disabled
* ensures that register writes occur when cpu is powered.
*/
smp_call_function_single(drvdata->cpu, etm4_disable_hw, drvdata, 1);
spin_unlock(&drvdata->spinlock);
cpus_read_unlock();
dev_dbg(&csdev->dev, "ETM tracing disabled\n");
}
static void etm4_disable(struct coresight_device *csdev,
struct perf_event *event)
{
u32 mode;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
/*
* For as long as the tracer isn't disabled another entity can't
* change its status. As such we can read the status here without
* fearing it will change under us.
*/
mode = local_read(&drvdata->mode);
switch (mode) {
case CS_MODE_DISABLED:
break;
case CS_MODE_SYSFS:
etm4_disable_sysfs(csdev);
break;
case CS_MODE_PERF:
etm4_disable_perf(csdev, event);
break;
}
if (mode)
local_set(&drvdata->mode, CS_MODE_DISABLED);
}
static const struct coresight_ops_source etm4_source_ops = {
.cpu_id = etm4_cpu_id,
.trace_id = etm4_trace_id,
.enable = etm4_enable,
.disable = etm4_disable,
};
static const struct coresight_ops etm4_cs_ops = {
.source_ops = &etm4_source_ops,
};
static void etm4_init_arch_data(void *info)
{
u32 etmidr0;
u32 etmidr1;
u32 etmidr2;
u32 etmidr3;
u32 etmidr4;
u32 etmidr5;
struct etmv4_drvdata *drvdata = info;
int i;
/* Make sure all registers are accessible */
etm4_os_unlock(drvdata);
CS_UNLOCK(drvdata->base);
/* find all capabilities of the tracing unit */
etmidr0 = readl_relaxed(drvdata->base + TRCIDR0);
/* INSTP0, bits[2:1] P0 tracing support field */
if (BMVAL(etmidr0, 1, 1) && BMVAL(etmidr0, 2, 2))
drvdata->instrp0 = true;
else
drvdata->instrp0 = false;
/* TRCBB, bit[5] Branch broadcast tracing support bit */
if (BMVAL(etmidr0, 5, 5))
drvdata->trcbb = true;
else
drvdata->trcbb = false;
/* TRCCOND, bit[6] Conditional instruction tracing support bit */
if (BMVAL(etmidr0, 6, 6))
drvdata->trccond = true;
else
drvdata->trccond = false;
/* TRCCCI, bit[7] Cycle counting instruction bit */
if (BMVAL(etmidr0, 7, 7))
drvdata->trccci = true;
else
drvdata->trccci = false;
/* RETSTACK, bit[9] Return stack bit */
if (BMVAL(etmidr0, 9, 9))
drvdata->retstack = true;
else
drvdata->retstack = false;
/* NUMEVENT, bits[11:10] Number of events field */
drvdata->nr_event = BMVAL(etmidr0, 10, 11);
/* QSUPP, bits[16:15] Q element support field */
drvdata->q_support = BMVAL(etmidr0, 15, 16);
/* TSSIZE, bits[28:24] Global timestamp size field */
drvdata->ts_size = BMVAL(etmidr0, 24, 28);
/* base architecture of trace unit */
etmidr1 = readl_relaxed(drvdata->base + TRCIDR1);
/*
* TRCARCHMIN, bits[7:4] architecture the minor version number
* TRCARCHMAJ, bits[11:8] architecture major versin number
*/
drvdata->arch = BMVAL(etmidr1, 4, 11);
drvdata->config.arch = drvdata->arch;
/* maximum size of resources */
etmidr2 = readl_relaxed(drvdata->base + TRCIDR2);
/* CIDSIZE, bits[9:5] Indicates the Context ID size */
drvdata->ctxid_size = BMVAL(etmidr2, 5, 9);
/* VMIDSIZE, bits[14:10] Indicates the VMID size */
drvdata->vmid_size = BMVAL(etmidr2, 10, 14);
/* CCSIZE, bits[28:25] size of the cycle counter in bits minus 12 */
drvdata->ccsize = BMVAL(etmidr2, 25, 28);
etmidr3 = readl_relaxed(drvdata->base + TRCIDR3);
/* CCITMIN, bits[11:0] minimum threshold value that can be programmed */
drvdata->ccitmin = BMVAL(etmidr3, 0, 11);
/* EXLEVEL_S, bits[19:16] Secure state instruction tracing */
drvdata->s_ex_level = BMVAL(etmidr3, 16, 19);
/* EXLEVEL_NS, bits[23:20] Non-secure state instruction tracing */
drvdata->ns_ex_level = BMVAL(etmidr3, 20, 23);
/*
* TRCERR, bit[24] whether a trace unit can trace a
* system error exception.
*/
if (BMVAL(etmidr3, 24, 24))
drvdata->trc_error = true;
else
drvdata->trc_error = false;
/* SYNCPR, bit[25] implementation has a fixed synchronization period? */
if (BMVAL(etmidr3, 25, 25))
drvdata->syncpr = true;
else
drvdata->syncpr = false;
/* STALLCTL, bit[26] is stall control implemented? */
if (BMVAL(etmidr3, 26, 26))
drvdata->stallctl = true;
else
drvdata->stallctl = false;
/* SYSSTALL, bit[27] implementation can support stall control? */
if (BMVAL(etmidr3, 27, 27))
drvdata->sysstall = true;
else
drvdata->sysstall = false;
/* NUMPROC, bits[30:28] the number of PEs available for tracing */
drvdata->nr_pe = BMVAL(etmidr3, 28, 30);
/* NOOVERFLOW, bit[31] is trace overflow prevention supported */
if (BMVAL(etmidr3, 31, 31))
drvdata->nooverflow = true;
else
drvdata->nooverflow = false;
/* number of resources trace unit supports */
etmidr4 = readl_relaxed(drvdata->base + TRCIDR4);
/* NUMACPAIRS, bits[0:3] number of addr comparator pairs for tracing */
drvdata->nr_addr_cmp = BMVAL(etmidr4, 0, 3);
/* NUMPC, bits[15:12] number of PE comparator inputs for tracing */
drvdata->nr_pe_cmp = BMVAL(etmidr4, 12, 15);
/*
* NUMRSPAIR, bits[19:16]
* The number of resource pairs conveyed by the HW starts at 0, i.e a
* value of 0x0 indicate 1 resource pair, 0x1 indicate two and so on.
* As such add 1 to the value of NUMRSPAIR for a better representation.
*
* For ETM v4.3 and later, 0x0 means 0, and no pairs are available -
* the default TRUE and FALSE resource selectors are omitted.
* Otherwise for values 0x1 and above the number is N + 1 as per v4.2.
*/
drvdata->nr_resource = BMVAL(etmidr4, 16, 19);
if ((drvdata->arch < ETM4X_ARCH_4V3) || (drvdata->nr_resource > 0))
drvdata->nr_resource += 1;
/*
* NUMSSCC, bits[23:20] the number of single-shot
* comparator control for tracing. Read any status regs as these
* also contain RO capability data.
*/
drvdata->nr_ss_cmp = BMVAL(etmidr4, 20, 23);
for (i = 0; i < drvdata->nr_ss_cmp; i++) {
drvdata->config.ss_status[i] =
readl_relaxed(drvdata->base + TRCSSCSRn(i));
}
/* NUMCIDC, bits[27:24] number of Context ID comparators for tracing */
drvdata->numcidc = BMVAL(etmidr4, 24, 27);
/* NUMVMIDC, bits[31:28] number of VMID comparators for tracing */
drvdata->numvmidc = BMVAL(etmidr4, 28, 31);
etmidr5 = readl_relaxed(drvdata->base + TRCIDR5);
/* NUMEXTIN, bits[8:0] number of external inputs implemented */
drvdata->nr_ext_inp = BMVAL(etmidr5, 0, 8);
/* TRACEIDSIZE, bits[21:16] indicates the trace ID width */
drvdata->trcid_size = BMVAL(etmidr5, 16, 21);
/* ATBTRIG, bit[22] implementation can support ATB triggers? */
if (BMVAL(etmidr5, 22, 22))
drvdata->atbtrig = true;
else
drvdata->atbtrig = false;
/*
* LPOVERRIDE, bit[23] implementation supports
* low-power state override
*/
if (BMVAL(etmidr5, 23, 23))
drvdata->lpoverride = true;
else
drvdata->lpoverride = false;
/* NUMSEQSTATE, bits[27:25] number of sequencer states implemented */
drvdata->nrseqstate = BMVAL(etmidr5, 25, 27);
/* NUMCNTR, bits[30:28] number of counters available for tracing */
drvdata->nr_cntr = BMVAL(etmidr5, 28, 30);
CS_LOCK(drvdata->base);
}
/* Set ELx trace filter access in the TRCVICTLR register */
static void etm4_set_victlr_access(struct etmv4_config *config)
{
u64 access_type;
config->vinst_ctrl &= ~(ETM_EXLEVEL_S_VICTLR_MASK | ETM_EXLEVEL_NS_VICTLR_MASK);
/*
* TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering
* bits in vinst_ctrl, same bit pattern as TRCACATRn values returned by
* etm4_get_access_type() but with a relative shift in this register.
*/
access_type = etm4_get_access_type(config) << ETM_EXLEVEL_LSHIFT_TRCVICTLR;
config->vinst_ctrl |= (u32)access_type;
}
static void etm4_set_default_config(struct etmv4_config *config)
{
/* disable all events tracing */
config->eventctrl0 = 0x0;
config->eventctrl1 = 0x0;
/* disable stalling */
config->stall_ctrl = 0x0;
/* enable trace synchronization every 4096 bytes, if available */
config->syncfreq = 0xC;
/* disable timestamp event */
config->ts_ctrl = 0x0;
/* TRCVICTLR::EVENT = 0x01, select the always on logic */
config->vinst_ctrl = BIT(0);
/* TRCVICTLR::EXLEVEL_NS:EXLEVELS: Set kernel / user filtering */
etm4_set_victlr_access(config);
}
static u64 etm4_get_ns_access_type(struct etmv4_config *config)
{
u64 access_type = 0;
/*
* EXLEVEL_NS, bits[15:12]
* The Exception levels are:
* Bit[12] Exception level 0 - Application
* Bit[13] Exception level 1 - OS
* Bit[14] Exception level 2 - Hypervisor
* Bit[15] Never implemented
*/
if (!is_kernel_in_hyp_mode()) {
/* Stay away from hypervisor mode for non-VHE */
access_type = ETM_EXLEVEL_NS_HYP;
if (config->mode & ETM_MODE_EXCL_KERN)
access_type |= ETM_EXLEVEL_NS_OS;
} else if (config->mode & ETM_MODE_EXCL_KERN) {
access_type = ETM_EXLEVEL_NS_HYP;
}
if (config->mode & ETM_MODE_EXCL_USER)
access_type |= ETM_EXLEVEL_NS_APP;
return access_type;
}
static u64 etm4_get_access_type(struct etmv4_config *config)
{
u64 access_type = etm4_get_ns_access_type(config);
u64 s_hyp = (config->arch & 0x0f) >= 0x4 ? ETM_EXLEVEL_S_HYP : 0;
/*
* EXLEVEL_S, bits[11:8], don't trace anything happening
* in secure state.
*/
access_type |= (ETM_EXLEVEL_S_APP |
ETM_EXLEVEL_S_OS |
s_hyp |
ETM_EXLEVEL_S_MON);
return access_type;
}
static void etm4_set_comparator_filter(struct etmv4_config *config,
u64 start, u64 stop, int comparator)
{
u64 access_type = etm4_get_access_type(config);
/* First half of default address comparator */
config->addr_val[comparator] = start;
config->addr_acc[comparator] = access_type;
config->addr_type[comparator] = ETM_ADDR_TYPE_RANGE;
/* Second half of default address comparator */
config->addr_val[comparator + 1] = stop;
config->addr_acc[comparator + 1] = access_type;
config->addr_type[comparator + 1] = ETM_ADDR_TYPE_RANGE;
/*
* Configure the ViewInst function to include this address range
* comparator.
*
* @comparator is divided by two since it is the index in the
* etmv4_config::addr_val array but register TRCVIIECTLR deals with
* address range comparator _pairs_.
*
* Therefore:
* index 0 -> compatator pair 0
* index 2 -> comparator pair 1
* index 4 -> comparator pair 2
* ...
* index 14 -> comparator pair 7
*/
config->viiectlr |= BIT(comparator / 2);
}
static void etm4_set_start_stop_filter(struct etmv4_config *config,
u64 address, int comparator,
enum etm_addr_type type)
{
int shift;
u64 access_type = etm4_get_access_type(config);
/* Configure the comparator */
config->addr_val[comparator] = address;
config->addr_acc[comparator] = access_type;
config->addr_type[comparator] = type;
/*
* Configure ViewInst Start-Stop control register.
* Addresses configured to start tracing go from bit 0 to n-1,
* while those configured to stop tracing from 16 to 16 + n-1.
*/
shift = (type == ETM_ADDR_TYPE_START ? 0 : 16);
config->vissctlr |= BIT(shift + comparator);
}
static void etm4_set_default_filter(struct etmv4_config *config)
{
/* Trace everything 'default' filter achieved by no filtering */
config->viiectlr = 0x0;
/*
* TRCVICTLR::SSSTATUS == 1, the start-stop logic is
* in the started state
*/
config->vinst_ctrl |= BIT(9);
config->mode |= ETM_MODE_VIEWINST_STARTSTOP;
/* No start-stop filtering for ViewInst */
config->vissctlr = 0x0;
}
static void etm4_set_default(struct etmv4_config *config)
{
if (WARN_ON_ONCE(!config))
return;
/*
* Make default initialisation trace everything
*
* This is done by a minimum default config sufficient to enable
* full instruction trace - with a default filter for trace all
* achieved by having no filtering.
*/
etm4_set_default_config(config);
etm4_set_default_filter(config);
}
static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type)
{
int nr_comparator, index = 0;
struct etmv4_config *config = &drvdata->config;
/*
* nr_addr_cmp holds the number of comparator _pair_, so time 2
* for the total number of comparators.
*/
nr_comparator = drvdata->nr_addr_cmp * 2;
/* Go through the tally of comparators looking for a free one. */
while (index < nr_comparator) {
switch (type) {
case ETM_ADDR_TYPE_RANGE:
if (config->addr_type[index] == ETM_ADDR_TYPE_NONE &&
config->addr_type[index + 1] == ETM_ADDR_TYPE_NONE)
return index;
/* Address range comparators go in pairs */
index += 2;
break;
case ETM_ADDR_TYPE_START:
case ETM_ADDR_TYPE_STOP:
if (config->addr_type[index] == ETM_ADDR_TYPE_NONE)
return index;
/* Start/stop address can have odd indexes */
index += 1;
break;
default:
return -EINVAL;
}
}
/* If we are here all the comparators have been used. */
return -ENOSPC;
}
static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
struct perf_event *event)
{
int i, comparator, ret = 0;
u64 address;
struct etmv4_config *config = &drvdata->config;
struct etm_filters *filters = event->hw.addr_filters;
if (!filters)
goto default_filter;
/* Sync events with what Perf got */
perf_event_addr_filters_sync(event);
/*
* If there are no filters to deal with simply go ahead with
* the default filter, i.e the entire address range.
*/
if (!filters->nr_filters)
goto default_filter;
for (i = 0; i < filters->nr_filters; i++) {
struct etm_filter *filter = &filters->etm_filter[i];
enum etm_addr_type type = filter->type;
/* See if a comparator is free. */
comparator = etm4_get_next_comparator(drvdata, type);
if (comparator < 0) {
ret = comparator;
goto out;
}
switch (type) {
case ETM_ADDR_TYPE_RANGE:
etm4_set_comparator_filter(config,
filter->start_addr,
filter->stop_addr,
comparator);
/*
* TRCVICTLR::SSSTATUS == 1, the start-stop logic is
* in the started state
*/
config->vinst_ctrl |= BIT(9);
/* No start-stop filtering for ViewInst */
config->vissctlr = 0x0;
break;
case ETM_ADDR_TYPE_START:
case ETM_ADDR_TYPE_STOP:
/* Get the right start or stop address */
address = (type == ETM_ADDR_TYPE_START ?
filter->start_addr :
filter->stop_addr);
/* Configure comparator */
etm4_set_start_stop_filter(config, address,
comparator, type);
/*
* If filters::ssstatus == 1, trace acquisition was
* started but the process was yanked away before the
* the stop address was hit. As such the start/stop
* logic needs to be re-started so that tracing can
* resume where it left.
*
* The start/stop logic status when a process is
* scheduled out is checked in function
* etm4_disable_perf().
*/
if (filters->ssstatus)
config->vinst_ctrl |= BIT(9);
/* No include/exclude filtering for ViewInst */
config->viiectlr = 0x0;
break;
default:
ret = -EINVAL;
goto out;
}
}
goto out;
default_filter:
etm4_set_default_filter(config);
out:
return ret;
}
void etm4_config_trace_mode(struct etmv4_config *config)
{
u32 mode;
mode = config->mode;
mode &= (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER);
/* excluding kernel AND user space doesn't make sense */
WARN_ON_ONCE(mode == (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER));
/* nothing to do if neither flags are set */
if (!(mode & ETM_MODE_EXCL_KERN) && !(mode & ETM_MODE_EXCL_USER))
return;
etm4_set_victlr_access(config);
}
static int etm4_online_cpu(unsigned int cpu)
{
if (!etmdrvdata[cpu])
return 0;
if (etmdrvdata[cpu]->boot_enable && !etmdrvdata[cpu]->sticky_enable)
coresight_enable(etmdrvdata[cpu]->csdev);
return 0;
}
static int etm4_starting_cpu(unsigned int cpu)
{
if (!etmdrvdata[cpu])
return 0;
spin_lock(&etmdrvdata[cpu]->spinlock);
if (!etmdrvdata[cpu]->os_unlock)
etm4_os_unlock(etmdrvdata[cpu]);
if (local_read(&etmdrvdata[cpu]->mode))
etm4_enable_hw(etmdrvdata[cpu]);
spin_unlock(&etmdrvdata[cpu]->spinlock);
return 0;
}
static int etm4_dying_cpu(unsigned int cpu)
{
if (!etmdrvdata[cpu])
return 0;
spin_lock(&etmdrvdata[cpu]->spinlock);
if (local_read(&etmdrvdata[cpu]->mode))
etm4_disable_hw(etmdrvdata[cpu]);
spin_unlock(&etmdrvdata[cpu]->spinlock);
return 0;
}
static void etm4_init_trace_id(struct etmv4_drvdata *drvdata)
{
drvdata->trcid = coresight_get_trace_id(drvdata->cpu);
}
static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
{
int i, ret = 0;
struct etmv4_save_state *state;
struct device *etm_dev = &drvdata->csdev->dev;
/*
* As recommended by 3.4.1 ("The procedure when powering down the PE")
* of ARM IHI 0064D
*/
dsb(sy);
isb();
CS_UNLOCK(drvdata->base);
/* Lock the OS lock to disable trace and external debugger access */
etm4_os_lock(drvdata);
/* wait for TRCSTATR.PMSTABLE to go up */
if (coresight_timeout(drvdata->base, TRCSTATR,
TRCSTATR_PMSTABLE_BIT, 1)) {
dev_err(etm_dev,
"timeout while waiting for PM Stable Status\n");
etm4_os_unlock(drvdata);
ret = -EBUSY;
goto out;
}
state = drvdata->save_state;
state->trcprgctlr = readl(drvdata->base + TRCPRGCTLR);
state->trcprocselr = readl(drvdata->base + TRCPROCSELR);
state->trcconfigr = readl(drvdata->base + TRCCONFIGR);
state->trcauxctlr = readl(drvdata->base + TRCAUXCTLR);
state->trceventctl0r = readl(drvdata->base + TRCEVENTCTL0R);
state->trceventctl1r = readl(drvdata->base + TRCEVENTCTL1R);
state->trcstallctlr = readl(drvdata->base + TRCSTALLCTLR);
state->trctsctlr = readl(drvdata->base + TRCTSCTLR);
state->trcsyncpr = readl(drvdata->base + TRCSYNCPR);
state->trcccctlr = readl(drvdata->base + TRCCCCTLR);
state->trcbbctlr = readl(drvdata->base + TRCBBCTLR);
state->trctraceidr = readl(drvdata->base + TRCTRACEIDR);
state->trcqctlr = readl(drvdata->base + TRCQCTLR);
state->trcvictlr = readl(drvdata->base + TRCVICTLR);
state->trcviiectlr = readl(drvdata->base + TRCVIIECTLR);
state->trcvissctlr = readl(drvdata->base + TRCVISSCTLR);
state->trcvipcssctlr = readl(drvdata->base + TRCVIPCSSCTLR);
state->trcvdctlr = readl(drvdata->base + TRCVDCTLR);
state->trcvdsacctlr = readl(drvdata->base + TRCVDSACCTLR);
state->trcvdarcctlr = readl(drvdata->base + TRCVDARCCTLR);
for (i = 0; i < drvdata->nrseqstate - 1; i++)
state->trcseqevr[i] = readl(drvdata->base + TRCSEQEVRn(i));
state->trcseqrstevr = readl(drvdata->base + TRCSEQRSTEVR);
state->trcseqstr = readl(drvdata->base + TRCSEQSTR);
state->trcextinselr = readl(drvdata->base + TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
state->trccntrldvr[i] = readl(drvdata->base + TRCCNTRLDVRn(i));
state->trccntctlr[i] = readl(drvdata->base + TRCCNTCTLRn(i));
state->trccntvr[i] = readl(drvdata->base + TRCCNTVRn(i));
}
for (i = 0; i < drvdata->nr_resource * 2; i++)
state->trcrsctlr[i] = readl(drvdata->base + TRCRSCTLRn(i));
for (i = 0; i < drvdata->nr_ss_cmp; i++) {
state->trcssccr[i] = readl(drvdata->base + TRCSSCCRn(i));
state->trcsscsr[i] = readl(drvdata->base + TRCSSCSRn(i));
state->trcsspcicr[i] = readl(drvdata->base + TRCSSPCICRn(i));
}
for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
state->trcacvr[i] = readq(drvdata->base + TRCACVRn(i));
state->trcacatr[i] = readq(drvdata->base + TRCACATRn(i));
}
/*
* Data trace stream is architecturally prohibited for A profile cores
* so we don't save (or later restore) trcdvcvr and trcdvcmr - As per
* section 1.3.4 ("Possible functional configurations of an ETMv4 trace
* unit") of ARM IHI 0064D.
*/
for (i = 0; i < drvdata->numcidc; i++)
state->trccidcvr[i] = readq(drvdata->base + TRCCIDCVRn(i));
for (i = 0; i < drvdata->numvmidc; i++)
state->trcvmidcvr[i] = readq(drvdata->base + TRCVMIDCVRn(i));
state->trccidcctlr0 = readl(drvdata->base + TRCCIDCCTLR0);
state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1);
state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR0);
state->trcvmidcctlr1 = readl(drvdata->base + TRCVMIDCCTLR1);
state->trcclaimset = readl(drvdata->base + TRCCLAIMCLR);
state->trcpdcr = readl(drvdata->base + TRCPDCR);
/* wait for TRCSTATR.IDLE to go up */
if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1)) {
dev_err(etm_dev,
"timeout while waiting for Idle Trace Status\n");
etm4_os_unlock(drvdata);
ret = -EBUSY;
goto out;
}
drvdata->state_needs_restore = true;
/*
* Power can be removed from the trace unit now. We do this to
* potentially save power on systems that respect the TRCPDCR_PU
* despite requesting software to save/restore state.
*/
writel_relaxed((state->trcpdcr & ~TRCPDCR_PU),
drvdata->base + TRCPDCR);
out:
CS_LOCK(drvdata->base);
return ret;
}
static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
{
int i;
struct etmv4_save_state *state = drvdata->save_state;
CS_UNLOCK(drvdata->base);
writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET);
writel_relaxed(state->trcprgctlr, drvdata->base + TRCPRGCTLR);
writel_relaxed(state->trcprocselr, drvdata->base + TRCPROCSELR);
writel_relaxed(state->trcconfigr, drvdata->base + TRCCONFIGR);
writel_relaxed(state->trcauxctlr, drvdata->base + TRCAUXCTLR);
writel_relaxed(state->trceventctl0r, drvdata->base + TRCEVENTCTL0R);
writel_relaxed(state->trceventctl1r, drvdata->base + TRCEVENTCTL1R);
writel_relaxed(state->trcstallctlr, drvdata->base + TRCSTALLCTLR);
writel_relaxed(state->trctsctlr, drvdata->base + TRCTSCTLR);
writel_relaxed(state->trcsyncpr, drvdata->base + TRCSYNCPR);
writel_relaxed(state->trcccctlr, drvdata->base + TRCCCCTLR);
writel_relaxed(state->trcbbctlr, drvdata->base + TRCBBCTLR);
writel_relaxed(state->trctraceidr, drvdata->base + TRCTRACEIDR);
writel_relaxed(state->trcqctlr, drvdata->base + TRCQCTLR);
writel_relaxed(state->trcvictlr, drvdata->base + TRCVICTLR);
writel_relaxed(state->trcviiectlr, drvdata->base + TRCVIIECTLR);
writel_relaxed(state->trcvissctlr, drvdata->base + TRCVISSCTLR);
writel_relaxed(state->trcvipcssctlr, drvdata->base + TRCVIPCSSCTLR);
writel_relaxed(state->trcvdctlr, drvdata->base + TRCVDCTLR);
writel_relaxed(state->trcvdsacctlr, drvdata->base + TRCVDSACCTLR);
writel_relaxed(state->trcvdarcctlr, drvdata->base + TRCVDARCCTLR);
for (i = 0; i < drvdata->nrseqstate - 1; i++)
writel_relaxed(state->trcseqevr[i],
drvdata->base + TRCSEQEVRn(i));
writel_relaxed(state->trcseqrstevr, drvdata->base + TRCSEQRSTEVR);
writel_relaxed(state->trcseqstr, drvdata->base + TRCSEQSTR);
writel_relaxed(state->trcextinselr, drvdata->base + TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) {
writel_relaxed(state->trccntrldvr[i],
drvdata->base + TRCCNTRLDVRn(i));
writel_relaxed(state->trccntctlr[i],
drvdata->base + TRCCNTCTLRn(i));
writel_relaxed(state->trccntvr[i],
drvdata->base + TRCCNTVRn(i));
}
for (i = 0; i < drvdata->nr_resource * 2; i++)
writel_relaxed(state->trcrsctlr[i],
drvdata->base + TRCRSCTLRn(i));
for (i = 0; i < drvdata->nr_ss_cmp; i++) {
writel_relaxed(state->trcssccr[i],
drvdata->base + TRCSSCCRn(i));
writel_relaxed(state->trcsscsr[i],
drvdata->base + TRCSSCSRn(i));
writel_relaxed(state->trcsspcicr[i],
drvdata->base + TRCSSPCICRn(i));
}
for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
writeq_relaxed(state->trcacvr[i],
drvdata->base + TRCACVRn(i));
writeq_relaxed(state->trcacatr[i],
drvdata->base + TRCACATRn(i));
}
for (i = 0; i < drvdata->numcidc; i++)
writeq_relaxed(state->trccidcvr[i],
drvdata->base + TRCCIDCVRn(i));
for (i = 0; i < drvdata->numvmidc; i++)
writeq_relaxed(state->trcvmidcvr[i],
drvdata->base + TRCVMIDCVRn(i));
writel_relaxed(state->trccidcctlr0, drvdata->base + TRCCIDCCTLR0);
writel_relaxed(state->trccidcctlr1, drvdata->base + TRCCIDCCTLR1);
writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR0);
writel_relaxed(state->trcvmidcctlr1, drvdata->base + TRCVMIDCCTLR1);
writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET);
writel_relaxed(state->trcpdcr, drvdata->base + TRCPDCR);
drvdata->state_needs_restore = false;
/*
* As recommended by section 4.3.7 ("Synchronization when using the
* memory-mapped interface") of ARM IHI 0064D
*/
dsb(sy);
isb();
/* Unlock the OS lock to re-enable trace and external debug access */
etm4_os_unlock(drvdata);
CS_LOCK(drvdata->base);
}
static int etm4_cpu_pm_notify(struct notifier_block *nb, unsigned long cmd,
void *v)
{
struct etmv4_drvdata *drvdata;
unsigned int cpu = smp_processor_id();
if (!etmdrvdata[cpu])
return NOTIFY_OK;
drvdata = etmdrvdata[cpu];
if (!drvdata->save_state)
return NOTIFY_OK;
if (WARN_ON_ONCE(drvdata->cpu != cpu))
return NOTIFY_BAD;
switch (cmd) {
case CPU_PM_ENTER:
/* save the state if self-hosted coresight is in use */
if (local_read(&drvdata->mode))
if (etm4_cpu_save(drvdata))
return NOTIFY_BAD;
break;
case CPU_PM_EXIT:
case CPU_PM_ENTER_FAILED:
if (drvdata->state_needs_restore)
etm4_cpu_restore(drvdata);
break;
default:
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
static struct notifier_block etm4_cpu_pm_nb = {
.notifier_call = etm4_cpu_pm_notify,
};
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
/* Setup PM. Deals with error conditions and counts */
static int __init etm4_pm_setup(void)
{
2020-07-02 00:08:52 +08:00
int ret;
2020-07-02 00:08:52 +08:00
ret = cpu_pm_register_notifier(&etm4_cpu_pm_nb);
if (ret)
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
return ret;
2020-07-02 00:08:52 +08:00
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING,
"arm/coresight4:starting",
etm4_starting_cpu, etm4_dying_cpu);
2020-07-02 00:08:52 +08:00
if (ret)
goto unregister_notifier;
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
"arm/coresight4:online",
etm4_online_cpu, NULL);
2020-07-02 00:08:52 +08:00
/* HP dyn state ID returned in ret on success */
if (ret > 0) {
hp_online = ret;
return 0;
}
/* failed dyn state - remove others */
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING);
2020-07-02 00:08:52 +08:00
unregister_notifier:
cpu_pm_unregister_notifier(&etm4_cpu_pm_nb);
return ret;
}
static void etm4_pm_clear(void)
{
2020-07-02 00:08:52 +08:00
cpu_pm_unregister_notifier(&etm4_cpu_pm_nb);
cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING);
if (hp_online) {
cpuhp_remove_state_nocalls(hp_online);
hp_online = 0;
}
}
static int etm4_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret;
void __iomem *base;
struct device *dev = &adev->dev;
struct coresight_platform_data *pdata = NULL;
struct etmv4_drvdata *drvdata;
struct resource *res = &adev->res;
struct coresight_desc desc = { 0 };
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
dev_set_drvdata(dev, drvdata);
if (pm_save_enable == PARAM_PM_SAVE_FIRMWARE)
pm_save_enable = coresight_loses_context_with_cpu(dev) ?
PARAM_PM_SAVE_SELF_HOSTED : PARAM_PM_SAVE_NEVER;
if (pm_save_enable != PARAM_PM_SAVE_NEVER) {
drvdata->save_state = devm_kmalloc(dev,
sizeof(struct etmv4_save_state), GFP_KERNEL);
if (!drvdata->save_state)
return -ENOMEM;
}
if (fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
drvdata->skip_power_up = true;
/* Validity for the resource is already checked by the AMBA core */
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
drvdata->base = base;
spin_lock_init(&drvdata->spinlock);
drvdata->cpu = coresight_get_cpu(dev);
if (drvdata->cpu < 0)
return drvdata->cpu;
desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
if (!desc.name)
return -ENOMEM;
if (smp_call_function_single(drvdata->cpu,
etm4_init_arch_data, drvdata, 1))
dev_err(dev, "ETM arch init failed\n");
if (etm4_arch_supported(drvdata->arch) == false)
return -EINVAL;
etm4_init_trace_id(drvdata);
etm4_set_default(&drvdata->config);
pdata = coresight_get_platform_data(dev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
adev->dev.platform_data = pdata;
desc.type = CORESIGHT_DEV_TYPE_SOURCE;
desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC;
desc.ops = &etm4_cs_ops;
desc.pdata = pdata;
desc.dev = dev;
desc.groups = coresight_etmv4_groups;
drvdata->csdev = coresight_register(&desc);
if (IS_ERR(drvdata->csdev))
return PTR_ERR(drvdata->csdev);
ret = etm_perf_symlink(drvdata->csdev, true);
if (ret) {
coresight_unregister(drvdata->csdev);
return ret;
}
etmdrvdata[drvdata->cpu] = drvdata;
pm_runtime_put(&adev->dev);
dev_info(&drvdata->csdev->dev, "CPU%d: ETM v%d.%d initialized\n",
drvdata->cpu, drvdata->arch >> 4, drvdata->arch & 0xf);
if (boot_enable) {
coresight_enable(drvdata->csdev);
drvdata->boot_enable = true;
}
return 0;
}
static struct amba_cs_uci_id uci_id_etm4[] = {
{
/* ETMv4 UCI data */
.devarch = 0x47704a13,
.devarch_mask = 0xfff0ffff,
.devtype = 0x00000013,
}
};
static void __exit clear_etmdrvdata(void *info)
{
int cpu = *(int *)info;
etmdrvdata[cpu] = NULL;
}
static int __exit etm4_remove(struct amba_device *adev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(&adev->dev);
etm_perf_symlink(drvdata->csdev, false);
/*
* Taking hotplug lock here to avoid racing between etm4_remove and
* CPU hotplug call backs.
*/
cpus_read_lock();
/*
* The readers for etmdrvdata[] are CPU hotplug call backs
* and PM notification call backs. Change etmdrvdata[i] on
* CPU i ensures these call backs has consistent view
* inside one call back function.
*/
if (smp_call_function_single(drvdata->cpu, clear_etmdrvdata, &drvdata->cpu, 1))
etmdrvdata[drvdata->cpu] = NULL;
cpus_read_unlock();
coresight_unregister(drvdata->csdev);
return 0;
}
static const struct amba_id etm4_ids[] = {
CS_AMBA_ID(0x000bb95d), /* Cortex-A53 */
CS_AMBA_ID(0x000bb95e), /* Cortex-A57 */
CS_AMBA_ID(0x000bb95a), /* Cortex-A72 */
CS_AMBA_ID(0x000bb959), /* Cortex-A73 */
CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4),/* Cortex-A35 */
CS_AMBA_UCI_ID(0x000bbd0c, uci_id_etm4),/* Neoverse N1 */
CS_AMBA_UCI_ID(0x000f0205, uci_id_etm4),/* Qualcomm Kryo */
CS_AMBA_UCI_ID(0x000f0211, uci_id_etm4),/* Qualcomm Kryo */
CS_AMBA_UCI_ID(0x000bb802, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A55 */
CS_AMBA_UCI_ID(0x000bb803, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A75 */
CS_AMBA_UCI_ID(0x000bb805, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A55 */
CS_AMBA_UCI_ID(0x000bb804, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A76 */
CS_AMBA_UCI_ID(0x000cc0af, uci_id_etm4),/* Marvell ThunderX2 */
CS_AMBA_UCI_ID(0x000b6d01, uci_id_etm4),/* HiSilicon-Hip08 */
CS_AMBA_UCI_ID(0x000b6d02, uci_id_etm4),/* HiSilicon-Hip09 */
{},
};
MODULE_DEVICE_TABLE(amba, etm4_ids);
static struct amba_driver etm4x_driver = {
.drv = {
.name = "coresight-etm4x",
.owner = THIS_MODULE,
.suppress_bind_attrs = true,
},
.probe = etm4_probe,
.remove = etm4_remove,
.id_table = etm4_ids,
};
coresight: etm4x: Fix etm4_count race by moving cpuhp callbacks to init etm4_count keeps track of number of ETMv4 registered and on some systems, a race is observed on etm4_count variable which can lead to multiple calls to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls cpuhp_store_callbacks() which prevents multiple registrations of callbacks for a given state and due to this race, it returns -EBUSY leading to ETM probe failures like below. coresight-etm4x: probe of 7040000.etm failed with error -16 This race can easily be triggered with async probe by setting probe type as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property "arm,coresight-loses-context-with-cpu". Prevent this race by moving cpuhp callbacks to etm driver init since the cpuhp callbacks doesn't have to depend on the etm4_count and can be once setup during driver init. Similarly we move cpu_pm notifier registration to driver init and completely remove etm4_count usage. Also now we can use non cpuslocked version of cpuhp callbacks with this movement. Fixes: 9b6a3f3633a5 ("coresight: etmv4: Fix CPU power management setup in probe() function") Fixes: 58eb457be028 ("hwtracing/coresight-etm4x: Convert to hotplug state machine") Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17 03:17:22 +08:00
static int __init etm4x_init(void)
{
int ret;
ret = etm4_pm_setup();
/* etm4_pm_setup() does its own cleanup - exit on error */
if (ret)
return ret;
ret = amba_driver_register(&etm4x_driver);
if (ret) {
pr_err("Error registering etm4x driver\n");
etm4_pm_clear();
}
return ret;
}
static void __exit etm4x_exit(void)
{
amba_driver_unregister(&etm4x_driver);
etm4_pm_clear();
}
module_init(etm4x_init);
module_exit(etm4x_exit);
MODULE_AUTHOR("Pratik Patel <pratikp@codeaurora.org>");
MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
MODULE_DESCRIPTION("Arm CoreSight Program Flow Trace v4.x driver");
MODULE_LICENSE("GPL v2");