OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_csr.c

478 lines
13 KiB
C
Raw Normal View History

drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <linux/firmware.h>
#include "i915_drv.h"
#include "i915_reg.h"
/**
* DOC: csr support for dmc
*
* Display Context Save and Restore (CSR) firmware support added from gen9
* onwards to drive newly added DMC (Display microcontroller) in display
* engine to save and restore the state of display engine when it enter into
* low-power state and comes back to normal.
*
* Firmware loading status will be one of the below states: FW_UNINITIALIZED,
* FW_LOADED, FW_FAILED.
*
* Once the firmware is written into the registers status will be moved from
* FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status will
* be moved to FW_FAILED.
*/
#define I915_CSR_SKL "i915/skl_dmc_ver1.bin"
#define I915_CSR_BXT "i915/bxt_dmc_ver1.bin"
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
MODULE_FIRMWARE(I915_CSR_SKL);
MODULE_FIRMWARE(I915_CSR_BXT);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/*
* SKL CSR registers for DC5 and DC6
*/
#define CSR_PROGRAM(i) (0x80000 + (i) * 4)
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
#define CSR_SSP_BASE_ADDR_GEN9 0x00002FC0
#define CSR_HTP_ADDR_SKL 0x00500034
#define CSR_SSP_BASE 0x8F074
#define CSR_HTP_SKL 0x8F004
#define CSR_LAST_WRITE 0x8F034
#define CSR_LAST_WRITE_VALUE 0xc003b400
/* MMIO address range for CSR program (0x80000 - 0x82FFF) */
#define CSR_MAX_FW_SIZE 0x2FFF
#define CSR_DEFAULT_FW_OFFSET 0xFFFFFFFF
#define CSR_MMIO_START_RANGE 0x80000
#define CSR_MMIO_END_RANGE 0x8FFFF
struct intel_css_header {
/* 0x09 for DMC */
uint32_t module_type;
/* Includes the DMC specific header in dwords */
uint32_t header_len;
/* always value would be 0x10000 */
uint32_t header_ver;
/* Not used */
uint32_t module_id;
/* Not used */
uint32_t module_vendor;
/* in YYYYMMDD format */
uint32_t date;
/* Size in dwords (CSS_Headerlen + PackageHeaderLen + dmc FWsLen)/4 */
uint32_t size;
/* Not used */
uint32_t key_size;
/* Not used */
uint32_t modulus_size;
/* Not used */
uint32_t exponent_size;
/* Not used */
uint32_t reserved1[12];
/* Major Minor */
uint32_t version;
/* Not used */
uint32_t reserved2[8];
/* Not used */
uint32_t kernel_header_info;
} __packed;
struct intel_fw_info {
uint16_t reserved1;
/* Stepping (A, B, C, ..., *). * is a wildcard */
char stepping;
/* Sub-stepping (0, 1, ..., *). * is a wildcard */
char substepping;
uint32_t offset;
uint32_t reserved2;
} __packed;
struct intel_package_header {
/* DMC container header length in dwords */
unsigned char header_len;
/* always value would be 0x01 */
unsigned char header_ver;
unsigned char reserved[10];
/* Number of valid entries in the FWInfo array below */
uint32_t num_entries;
struct intel_fw_info fw_info[20];
} __packed;
struct intel_dmc_header {
/* always value would be 0x40403E3E */
uint32_t signature;
/* DMC binary header length */
unsigned char header_len;
/* 0x01 */
unsigned char header_ver;
/* Reserved */
uint16_t dmcc_ver;
/* Major, Minor */
uint32_t project;
/* Firmware program size (excluding header) in dwords */
uint32_t fw_size;
/* Major Minor version */
uint32_t fw_version;
/* Number of valid MMIO cycles present. */
uint32_t mmio_count;
/* MMIO address */
uint32_t mmioaddr[8];
/* MMIO data */
uint32_t mmiodata[8];
/* FW filename */
unsigned char dfile[32];
uint32_t reserved1[2];
} __packed;
struct stepping_info {
char stepping;
char substepping;
};
static const struct stepping_info skl_stepping_info[] = {
{'A', '0'}, {'B', '0'}, {'C', '0'},
{'D', '0'}, {'E', '0'}, {'F', '0'},
{'G', '0'}, {'H', '0'}, {'I', '0'}
};
static struct stepping_info bxt_stepping_info[] = {
{'A', '0'}, {'A', '1'}, {'A', '2'},
{'B', '0'}, {'B', '1'}, {'B', '2'}
};
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
static char intel_get_stepping(struct drm_device *dev)
{
if (IS_SKYLAKE(dev) && (dev->pdev->revision <
ARRAY_SIZE(skl_stepping_info)))
return skl_stepping_info[dev->pdev->revision].stepping;
else if (IS_BROXTON(dev) && (dev->pdev->revision <
ARRAY_SIZE(bxt_stepping_info)))
return bxt_stepping_info[dev->pdev->revision].stepping;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
else
return -ENODATA;
}
static char intel_get_substepping(struct drm_device *dev)
{
if (IS_SKYLAKE(dev) && (dev->pdev->revision <
ARRAY_SIZE(skl_stepping_info)))
return skl_stepping_info[dev->pdev->revision].substepping;
else if (IS_BROXTON(dev) && (dev->pdev->revision <
ARRAY_SIZE(bxt_stepping_info)))
return bxt_stepping_info[dev->pdev->revision].substepping;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
else
return -ENODATA;
}
/**
* intel_csr_load_status_get() - to get firmware loading status.
* @dev_priv: i915 device.
*
* This function helps to get the firmware loading status.
*
* Return: Firmware loading status.
*/
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
{
enum csr_state state;
mutex_lock(&dev_priv->csr_lock);
state = dev_priv->csr.state;
mutex_unlock(&dev_priv->csr_lock);
return state;
}
/**
* intel_csr_load_status_set() - help to set firmware loading status.
* @dev_priv: i915 device.
* @state: enumeration of firmware loading status.
*
* Set the firmware loading status.
*/
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
enum csr_state state)
{
mutex_lock(&dev_priv->csr_lock);
dev_priv->csr.state = state;
mutex_unlock(&dev_priv->csr_lock);
}
/**
* intel_csr_load_program() - write the firmware from memory to register.
* @dev: drm device.
*
* CSR firmware is read from a .bin file and kept in internal memory one time.
* Everytime display comes back from low power state this function is called to
* copy the firmware from internal memory to registers.
*/
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
void intel_csr_load_program(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 *payload = dev_priv->csr.dmc_payload;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
uint32_t i, fw_size;
if (!IS_GEN9(dev)) {
DRM_ERROR("No CSR support available for this platform\n");
return;
}
mutex_lock(&dev_priv->csr_lock);
fw_size = dev_priv->csr.dmc_fw_size;
for (i = 0; i < fw_size; i++)
I915_WRITE(CSR_PROGRAM(i), payload[i]);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
for (i = 0; i < dev_priv->csr.mmio_count; i++) {
I915_WRITE(dev_priv->csr.mmioaddr[i],
dev_priv->csr.mmiodata[i]);
}
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
dev_priv->csr.state = FW_LOADED;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
mutex_unlock(&dev_priv->csr_lock);
}
static void finish_csr_load(const struct firmware *fw, void *context)
{
struct drm_i915_private *dev_priv = context;
struct drm_device *dev = dev_priv->dev;
struct intel_css_header *css_header;
struct intel_package_header *package_header;
struct intel_dmc_header *dmc_header;
struct intel_csr *csr = &dev_priv->csr;
char stepping = intel_get_stepping(dev);
char substepping = intel_get_substepping(dev);
uint32_t dmc_offset = CSR_DEFAULT_FW_OFFSET, readcount = 0, nbytes;
uint32_t i;
uint32_t *dmc_payload;
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
bool fw_loaded = false;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
if (!fw) {
i915_firmware_load_error_print(csr->fw_path, 0);
goto out;
}
if ((stepping == -ENODATA) || (substepping == -ENODATA)) {
DRM_ERROR("Unknown stepping info, firmware loading failed\n");
goto out;
}
/* Extract CSS Header information*/
css_header = (struct intel_css_header *)fw->data;
if (sizeof(struct intel_css_header) !=
(css_header->header_len * 4)) {
DRM_ERROR("Firmware has wrong CSS header length %u bytes\n",
(css_header->header_len * 4));
goto out;
}
readcount += sizeof(struct intel_css_header);
/* Extract Package Header information*/
package_header = (struct intel_package_header *)
&fw->data[readcount];
if (sizeof(struct intel_package_header) !=
(package_header->header_len * 4)) {
DRM_ERROR("Firmware has wrong package header length %u bytes\n",
(package_header->header_len * 4));
goto out;
}
readcount += sizeof(struct intel_package_header);
/* Search for dmc_offset to find firware binary. */
for (i = 0; i < package_header->num_entries; i++) {
if (package_header->fw_info[i].substepping == '*' &&
stepping == package_header->fw_info[i].stepping) {
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (stepping == package_header->fw_info[i].stepping &&
substepping == package_header->fw_info[i].substepping) {
dmc_offset = package_header->fw_info[i].offset;
break;
} else if (package_header->fw_info[i].stepping == '*' &&
package_header->fw_info[i].substepping == '*')
dmc_offset = package_header->fw_info[i].offset;
}
if (dmc_offset == CSR_DEFAULT_FW_OFFSET) {
DRM_ERROR("Firmware not supported for %c stepping\n", stepping);
goto out;
}
readcount += dmc_offset;
/* Extract dmc_header information. */
dmc_header = (struct intel_dmc_header *)&fw->data[readcount];
if (sizeof(struct intel_dmc_header) != (dmc_header->header_len)) {
DRM_ERROR("Firmware has wrong dmc header length %u bytes\n",
(dmc_header->header_len));
goto out;
}
readcount += sizeof(struct intel_dmc_header);
/* Cache the dmc header info. */
if (dmc_header->mmio_count > ARRAY_SIZE(csr->mmioaddr)) {
DRM_ERROR("Firmware has wrong mmio count %u\n",
dmc_header->mmio_count);
goto out;
}
csr->mmio_count = dmc_header->mmio_count;
for (i = 0; i < dmc_header->mmio_count; i++) {
if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE ||
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) {
DRM_ERROR(" Firmware has wrong mmio address 0x%x\n",
dmc_header->mmioaddr[i]);
goto out;
}
csr->mmioaddr[i] = dmc_header->mmioaddr[i];
csr->mmiodata[i] = dmc_header->mmiodata[i];
}
/* fw_size is in dwords, so multiplied by 4 to convert into bytes. */
nbytes = dmc_header->fw_size * 4;
if (nbytes > CSR_MAX_FW_SIZE) {
DRM_ERROR("CSR firmware too big (%u) bytes\n", nbytes);
goto out;
}
csr->dmc_fw_size = dmc_header->fw_size;
csr->dmc_payload = kmalloc(nbytes, GFP_KERNEL);
if (!csr->dmc_payload) {
DRM_ERROR("Memory allocation failed for dmc payload\n");
goto out;
}
dmc_payload = csr->dmc_payload;
memcpy(dmc_payload, &fw->data[readcount], nbytes);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/* load csr program during system boot, as needed for DC states */
intel_csr_load_program(dev);
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
fw_loaded = true;
DRM_DEBUG_KMS("Finished loading %s\n", dev_priv->csr.fw_path);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
out:
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
if (fw_loaded)
intel_runtime_pm_put(dev_priv);
else
intel_csr_load_status_set(dev_priv, FW_FAILED);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
release_firmware(fw);
}
/**
* intel_csr_ucode_init() - initialize the firmware loading.
* @dev: drm device.
*
* This function is called at the time of loading the display driver to read
* firmware from a .bin file and copied into a internal memory.
*/
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
void intel_csr_ucode_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_csr *csr = &dev_priv->csr;
int ret;
if (!HAS_CSR(dev))
return;
if (IS_SKYLAKE(dev))
csr->fw_path = I915_CSR_SKL;
else if (IS_BROXTON(dev_priv))
csr->fw_path = I915_CSR_BXT;
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
else {
DRM_ERROR("Unexpected: no known CSR firmware for platform\n");
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
intel_csr_load_status_set(dev_priv, FW_FAILED);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
return;
}
DRM_DEBUG_KMS("Loading %s\n", csr->fw_path);
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
/*
* Obtain a runtime pm reference, until CSR is loaded,
* to avoid entering runtime-suspend.
*/
intel_runtime_pm_get(dev_priv);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
/* CSR supported for platform, load firmware */
ret = request_firmware_nowait(THIS_MODULE, true, csr->fw_path,
&dev_priv->dev->pdev->dev,
GFP_KERNEL, dev_priv,
finish_csr_load);
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
if (ret) {
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
i915_firmware_load_error_print(csr->fw_path, ret);
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
intel_csr_load_status_set(dev_priv, FW_FAILED);
}
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
}
/**
* intel_csr_ucode_fini() - unload the CSR firmware.
* @dev: drm device.
*
* Firmmware unloading includes freeing the internal momory and reset the
* firmware loading status.
*/
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
void intel_csr_ucode_fini(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!HAS_CSR(dev))
return;
drm/i915/skl: Add DC5 Trigger Sequence Add triggers as per expectations mentioned in gen9_enable_dc5 and gen9_disable_dc5 patch. Also call POSTING_READ for every write to a register to ensure that its written immediately. v1: Remove POSTING_READ calls as they've already been added in previous patches. v2: Rebase to move all runtime pm specific changes to intel_runtime_pm.c file. Modified as per review comments from Imre: 1] Change variable name 'dc5_allowed' to 'dc5_enabled' to correspond to relevant functions. 2] Move the check dc5_enabled in skl_set_power_well() to disable DC5 into gen9_disable_DC5 which is a more appropriate place. 3] Convert checks for 'pm.dc5_enabled' and 'pm.suspended' in skl_set_power_well() to warnings. However, removing them for now as they'll be included in a future patch asserting DC-state entry/exit criteria. 4] Enable DC5, only when CSR firmware is verified to be loaded. Create new structure to track 'enabled' and 'deferred' status of DC5. 5] Ensure runtime PM reference is obtained, if CSR is not loaded, to avoid entering runtime-suspend and release it when it's loaded. 6] Protect necessary CSR-related code with locks. 7] Move CSR-loading call to runtime PM initialization, as power domains needed to be accessed during deferred DC5-enabling, are not initialized earlier. v3: Rebase to latest. Modified as per review comments from Imre: 1] Use blocking wait for CSR-loading to finish to enable DC5 for simplicity, instead of deferring enabling DC5 until CSR is loaded. 2] Obtain runtime PM reference during CSR-loading initialization itself as deferred DC5- enabling is removed and release it at the end of CSR-loading functionality. 3] Revert calling CSR-loading functionality to the beginning of i915 driver-load functionality to avoid any delay in loading. 4] Define another variable to track whether CSR-loading failed and use it to avoid enabling DC5 if it's true. 5] Define CSR-load-status accessor functions for use later. v4: 1] Disable DC5 before enabling PG2 instead of after it. 2] DC5 was being mistaken enabled even when CSR-loading timed-out. Fix that. 3] Enable DC5-related functionality using a macro. 4] Remove dc5_enabled tracking variable and its use as it's not needed now. v5: 1] Mark CSR failed to load where necessary in finish_csr_load function. 2] Use mutex-protected accessor function to check if CSR loaded instead of directly accessing the variable. 3] Prefix csr_load_status_get/set function names with intel_. v6: rebase to latest. v7: Rebase on top of nightly (Damien) v8: Squashed the patch from Imre - added csr helper pointers to simplify the code. (Imre) v9: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v10: Added a enum for different csr states, suggested by Imre. (Animesh) v11: Based on review comments from Imre, Damien and Daniel following changes done - enum name chnaged to csr_state (singular form). - FW_UNINITIALIZED used as zeroth element in enum csr_state. - Prototype changed for helper function(set/get csr status), using enum csr_state instead of bool. v12: Based on review comment from Imre, introduced bool fw_loaded local to finish_csr_load() which helps calling once to set the csr status. The same flag used to fail RPM if find any issue during firmware loading. Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-17 22:16:16 +08:00
intel_csr_load_status_set(dev_priv, FW_FAILED);
drm/i915/skl: Add support to load SKL CSR firmware. Display Context Save and Restore support is needed for various SKL Display C states like DC5, DC6. This implementation is added based on first version of DMC CSR program that we received from h/w team. Here we are using request_firmware based design. Finally this firmware should end up in linux-firmware tree. For SKL platform its mandatory to ensure that we load this csr program before enabling DC states like DC5/DC6. As CSR program gets reset on various conditions, we should ensure to load it during boot and in future change to be added to load this system resume sequence too. v1: Initial relese as RFC patch v2: Design change as per Daniel, Damien and Shobit's review comments request firmware method followed. v3: Some optimization and functional changes. Pulled register defines into drivers/gpu/drm/i915/i915_reg.h Used kmemdup to allocate and duplicate firmware content. Ensured to free allocated buffer. v4: Modified as per review comments from Satheesh and Daniel Removed temporary buffer. Optimized number of writes by replacing I915_WRITE with I915_WRITE64. v5: Modified as per review comemnts from Damien. - Changed name for functions and firmware. - Introduced HAS_CSR. - Reverted back previous change and used csr_buf with u8 size. - Using cpu_to_be64 for endianness change. Modified as per review comments from Imre. - Modified registers and macro names to be a bit closer to bspec terminology and the existing register naming in the driver. - Early return for non SKL platforms in intel_load_csr_program function. - Added locking around CSR program load function as it may be called concurrently during system/runtime resume. - Releasing the fw before loading the program for consistency - Handled error path during f/w load. v6: Modified as per review comments from Imre. - Corrected out_freecsr sequence. v7: Modified as per review comments from Imre. Fail loading fw if fw->size%8!=0. v8: Rebase to latest. v9: Rebase on top of -nightly (Damien) v10: Enabled support for dmc firmware ver 1.0. According to ver 1.0 in a single binary package all the firmware's that are required for different stepping's of the product will be stored. The package contains the css header, followed by the package header and the actual dmc firmwares. Package header contains the firmware/stepping mapping table and the corresponding firmware offsets to the individual binaries, within the package. Each individual program binary contains the header and the payload sections whose size is specified in the header section. This changes are done to extract the specific firmaware from the package. (Animesh) v11: Modified as per review comemnts from Imre. - Added code comment from bpec for header structure elements. - Added __packed to avoid structure padding. - Added helper functions for stepping and substepping info. - Added code comment for CSR_MAX_FW_SIZE. - Disabled BXT firmware loading, will be enabled with dmc 1.0 support. - Changed skl_stepping_info based on bspec, earlier used from config DB. - Removed duplicate call of cpu_to_be* from intel_csr_load_program function. - Used cpu_to_be32 instead of cpu_to_be64 as firmware binary in dword aligned. - Added sanity check for header length. - Added sanity check for mmio address got from firmware binary. - kmalloc done separately for dmc header and dmc firmware. (Animesh) v12: Modified as per review comemnts from Imre. - Corrected the typo error in skl stepping info structure. - Added out-of-bound access for skl_stepping_info. - Sanity check for mmio address modified. - Sanity check added for stepping and substeppig. - Modified the intel_dmc_info structure, cache only the required header info. (Animesh) v13: clarify firmware load error message. The reason for a firmware loading failure can be obscure if the driver is built-in. Provide an explanation to the user about the likely reason for the failure and how to resolve it. (Imre) v14: Suggested by Jani. - fix s/I915/CONFIG_DRM_I915/ typo - add fw_path to the firmware object instead of using a static ptr (Jani) v15: 1) Changed the firmware name as dmc_gen9.bin, everytime for a new firmware version a symbolic link with same name will help not to build kernel again. 2) Changes done as per review comments from Imre. - Error check removed for intel_csr_ucode_init. - Moved csr-specific data structure to intel_csr.h and optimization done on structure definition. - fw->data used directly for parsing the header info & memory allocation only done separately for payload. (Animesh) v16: - No need for out_regs label in i915_driver_load(), so removed it. - Changed the firmware name as skl_dmc_ver1.bin, followed naming convention <platform>_dmc_<api-version>.bin (Animesh) Issue: VIZ-2569 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-04 20:58:44 +08:00
kfree(dev_priv->csr.dmc_payload);
}
drm/i915/skl: Assert the requirements to enter or exit DC5. Warn if the conditions to enter or exit DC5 are not satisfied such as support for runtime PM, state of power well, CSR loading etc. v2: Removed camelcase in functions and variables. v3: Do some minimal check to assert if CSR program is not loaded. v4: 1] Used an appropriate function lookup_power_well() to identify power well, instead of using a magic number which can change in future. 2] Split the conditions further in assert_can_enable_DC5() and added more checks. 3] Removed all WARNs from assert_can_disable_DC5 as they were unnecessary and added two new ones. 4] Changed variable names as updated in earlier patches. v5: 1] Change lookup_power_well function to take an int power well id. 2] Define a new intel_display_power_well_is_enabled helper function to check whether a particular power well is enabled. 3] Use CSR-related mutex in assert_csr_loaded function. v6: Remove use of dc5_enabled variable as it's no longer needed. v7: 1] Rebase to latest. 2] Move all DC5-related functions from intel_display.c to intel_runtime_pm.c. v8: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v9: Modified below changes based on review comments from Imre. - Moved intel_display_power_well_is_enabled() to intel_runtime_pm.c. - Removed mutex lock from assert_csr_loaded(). (Animesh) Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-16 16:52:10 +08:00
void assert_csr_loaded(struct drm_i915_private *dev_priv)
{
WARN_ONCE(intel_csr_load_status_get(dev_priv) != FW_LOADED,
"CSR is not loaded.\n");
WARN_ONCE(!I915_READ(CSR_PROGRAM(0)),
"CSR program storage start is NULL\n");
WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n");
WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n");
drm/i915/skl: Assert the requirements to enter or exit DC5. Warn if the conditions to enter or exit DC5 are not satisfied such as support for runtime PM, state of power well, CSR loading etc. v2: Removed camelcase in functions and variables. v3: Do some minimal check to assert if CSR program is not loaded. v4: 1] Used an appropriate function lookup_power_well() to identify power well, instead of using a magic number which can change in future. 2] Split the conditions further in assert_can_enable_DC5() and added more checks. 3] Removed all WARNs from assert_can_disable_DC5 as they were unnecessary and added two new ones. 4] Changed variable names as updated in earlier patches. v5: 1] Change lookup_power_well function to take an int power well id. 2] Define a new intel_display_power_well_is_enabled helper function to check whether a particular power well is enabled. 3] Use CSR-related mutex in assert_csr_loaded function. v6: Remove use of dc5_enabled variable as it's no longer needed. v7: 1] Rebase to latest. 2] Move all DC5-related functions from intel_display.c to intel_runtime_pm.c. v8: After adding dmc ver 1.0 support rebased on top of nightly. (Animesh) v9: Modified below changes based on review comments from Imre. - Moved intel_display_power_well_is_enabled() to intel_runtime_pm.c. - Removed mutex lock from assert_csr_loaded(). (Animesh) Issue: VIZ-2819 Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> Signed-off-by: Suketu Shah <suketu.j.shah@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-16 16:52:10 +08:00
}