OpenCloudOS-Kernel/drivers/scsi/sd_zbc.c

649 lines
15 KiB
C
Raw Normal View History

sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
/*
* SCSI Zoned Block commands
*
* Copyright (C) 2014-2015 SUSE Linux GmbH
* Written by: Hannes Reinecke <hare@suse.de>
* Modified by: Damien Le Moal <damien.lemoal@hgst.com>
* Modified by: Shaun Tancheff <shaun.tancheff@seagate.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
* USA.
*
*/
#include <linux/blkdev.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_eh.h>
#include "sd.h"
#include "scsi_priv.h"
enum zbc_zone_type {
ZBC_ZONE_TYPE_CONV = 0x1,
ZBC_ZONE_TYPE_SEQWRITE_REQ,
ZBC_ZONE_TYPE_SEQWRITE_PREF,
ZBC_ZONE_TYPE_RESERVED,
};
enum zbc_zone_cond {
ZBC_ZONE_COND_NO_WP,
ZBC_ZONE_COND_EMPTY,
ZBC_ZONE_COND_IMP_OPEN,
ZBC_ZONE_COND_EXP_OPEN,
ZBC_ZONE_COND_CLOSED,
ZBC_ZONE_COND_READONLY = 0xd,
ZBC_ZONE_COND_FULL,
ZBC_ZONE_COND_OFFLINE,
};
/**
* Convert a zone descriptor to a zone struct.
*/
static void sd_zbc_parse_report(struct scsi_disk *sdkp,
u8 *buf,
struct blk_zone *zone)
{
struct scsi_device *sdp = sdkp->device;
memset(zone, 0, sizeof(struct blk_zone));
zone->type = buf[0] & 0x0f;
zone->cond = (buf[1] >> 4) & 0xf;
if (buf[1] & 0x01)
zone->reset = 1;
if (buf[1] & 0x02)
zone->non_seq = 1;
zone->len = logical_to_sectors(sdp, get_unaligned_be64(&buf[8]));
zone->start = logical_to_sectors(sdp, get_unaligned_be64(&buf[16]));
zone->wp = logical_to_sectors(sdp, get_unaligned_be64(&buf[24]));
if (zone->type != ZBC_ZONE_TYPE_CONV &&
zone->cond == ZBC_ZONE_COND_FULL)
zone->wp = zone->start + zone->len;
}
/**
* Issue a REPORT ZONES scsi command.
*/
static int sd_zbc_report_zones(struct scsi_disk *sdkp, unsigned char *buf,
unsigned int buflen, sector_t lba)
{
struct scsi_device *sdp = sdkp->device;
const int timeout = sdp->request_queue->rq_timeout;
struct scsi_sense_hdr sshdr;
unsigned char cmd[16];
unsigned int rep_len;
int result;
memset(cmd, 0, 16);
cmd[0] = ZBC_IN;
cmd[1] = ZI_REPORT_ZONES;
put_unaligned_be64(lba, &cmd[2]);
put_unaligned_be32(buflen, &cmd[10]);
memset(buf, 0, buflen);
result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
buf, buflen, &sshdr,
timeout, SD_MAX_RETRIES, NULL);
if (result) {
sd_printk(KERN_ERR, sdkp,
"REPORT ZONES lba %llu failed with %d/%d\n",
(unsigned long long)lba,
host_byte(result), driver_byte(result));
return -EIO;
}
rep_len = get_unaligned_be32(&buf[0]);
if (rep_len < 64) {
sd_printk(KERN_ERR, sdkp,
"REPORT ZONES report invalid length %u\n",
rep_len);
return -EIO;
}
return 0;
}
int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
sector_t lba, sector = blk_rq_pos(rq);
unsigned int nr_bytes = blk_rq_bytes(rq);
int ret;
WARN_ON(nr_bytes == 0);
if (!sd_is_zoned(sdkp))
/* Not a zoned device */
return BLKPREP_KILL;
ret = scsi_init_io(cmd);
if (ret != BLKPREP_OK)
return ret;
cmd->cmd_len = 16;
memset(cmd->cmnd, 0, cmd->cmd_len);
cmd->cmnd[0] = ZBC_IN;
cmd->cmnd[1] = ZI_REPORT_ZONES;
lba = sectors_to_logical(sdkp->device, sector);
put_unaligned_be64(lba, &cmd->cmnd[2]);
put_unaligned_be32(nr_bytes, &cmd->cmnd[10]);
/* Do partial report for speeding things up */
cmd->cmnd[14] = ZBC_REPORT_ZONE_PARTIAL;
cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->sdb.length = nr_bytes;
cmd->transfersize = sdkp->device->sector_size;
cmd->allowed = 0;
/*
* Report may return less bytes than requested. Make sure
* to report completion on the entire initial request.
*/
rq->__data_len = nr_bytes;
return BLKPREP_OK;
}
static void sd_zbc_report_zones_complete(struct scsi_cmnd *scmd,
unsigned int good_bytes)
{
struct request *rq = scmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
struct sg_mapping_iter miter;
struct blk_zone_report_hdr hdr;
struct blk_zone zone;
unsigned int offset, bytes = 0;
unsigned long flags;
u8 *buf;
if (good_bytes < 64)
return;
memset(&hdr, 0, sizeof(struct blk_zone_report_hdr));
sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd),
SG_MITER_TO_SG | SG_MITER_ATOMIC);
local_irq_save(flags);
while (sg_miter_next(&miter) && bytes < good_bytes) {
buf = miter.addr;
offset = 0;
if (bytes == 0) {
/* Set the report header */
hdr.nr_zones = min_t(unsigned int,
(good_bytes - 64) / 64,
get_unaligned_be32(&buf[0]) / 64);
memcpy(buf, &hdr, sizeof(struct blk_zone_report_hdr));
offset += 64;
bytes += 64;
}
/* Parse zone descriptors */
while (offset < miter.length && hdr.nr_zones) {
WARN_ON(offset > miter.length);
buf = miter.addr + offset;
sd_zbc_parse_report(sdkp, buf, &zone);
memcpy(buf, &zone, sizeof(struct blk_zone));
offset += 64;
bytes += 64;
hdr.nr_zones--;
}
if (!hdr.nr_zones)
break;
}
sg_miter_stop(&miter);
local_irq_restore(flags);
}
static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
{
return logical_to_sectors(sdkp->device, sdkp->zone_blocks);
}
static inline unsigned int sd_zbc_zone_no(struct scsi_disk *sdkp,
sector_t sector)
{
return sectors_to_logical(sdkp->device, sector) >> sdkp->zone_shift;
}
int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
sector_t sector = blk_rq_pos(rq);
sector_t block = sectors_to_logical(sdkp->device, sector);
unsigned int zno = block >> sdkp->zone_shift;
if (!sd_is_zoned(sdkp))
/* Not a zoned device */
return BLKPREP_KILL;
if (sdkp->device->changed)
return BLKPREP_KILL;
if (sector & (sd_zbc_zone_sectors(sdkp) - 1))
/* Unaligned request */
return BLKPREP_KILL;
/* Do not allow concurrent reset and writes */
if (sdkp->zones_wlock &&
test_and_set_bit(zno, sdkp->zones_wlock))
return BLKPREP_DEFER;
cmd->cmd_len = 16;
memset(cmd->cmnd, 0, cmd->cmd_len);
cmd->cmnd[0] = ZBC_OUT;
cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
put_unaligned_be64(block, &cmd->cmnd[2]);
rq->timeout = SD_TIMEOUT;
cmd->sc_data_direction = DMA_NONE;
cmd->transfersize = 0;
cmd->allowed = 0;
return BLKPREP_OK;
}
int sd_zbc_setup_write_cmnd(struct scsi_cmnd *cmd)
{
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
sector_t sector = blk_rq_pos(rq);
sector_t zone_sectors = sd_zbc_zone_sectors(sdkp);
unsigned int zno = sd_zbc_zone_no(sdkp, sector);
/*
* Note: Checks of the alignment of the write command on
* logical blocks is done in sd.c
*/
/* Do not allow zone boundaries crossing on host-managed drives */
if (blk_queue_zoned_model(sdkp->disk->queue) == BLK_ZONED_HM &&
(sector & (zone_sectors - 1)) + blk_rq_sectors(rq) > zone_sectors)
return BLKPREP_KILL;
/*
* Do not issue more than one write at a time per
* zone. This solves write ordering problems due to
* the unlocking of the request queue in the dispatch
* path in the non scsi-mq case. For scsi-mq, this
* also avoids potential write reordering when multiple
* threads running on different CPUs write to the same
* zone (with a synchronized sequential pattern).
*/
if (sdkp->zones_wlock &&
test_and_set_bit(zno, sdkp->zones_wlock))
return BLKPREP_DEFER;
return BLKPREP_OK;
}
static void sd_zbc_unlock_zone(struct request *rq)
{
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
if (sdkp->zones_wlock) {
unsigned int zno = sd_zbc_zone_no(sdkp, blk_rq_pos(rq));
WARN_ON_ONCE(!test_bit(zno, sdkp->zones_wlock));
clear_bit_unlock(zno, sdkp->zones_wlock);
smp_mb__after_atomic();
}
}
void sd_zbc_cancel_write_cmnd(struct scsi_cmnd *cmd)
{
sd_zbc_unlock_zone(cmd->request);
}
void sd_zbc_complete(struct scsi_cmnd *cmd,
unsigned int good_bytes,
struct scsi_sense_hdr *sshdr)
{
int result = cmd->result;
struct request *rq = cmd->request;
switch (req_op(rq)) {
case REQ_OP_WRITE:
case REQ_OP_WRITE_SAME:
case REQ_OP_ZONE_RESET:
/* Unlock the zone */
sd_zbc_unlock_zone(rq);
if (!result ||
sshdr->sense_key != ILLEGAL_REQUEST)
break;
switch (sshdr->asc) {
case 0x24:
/*
* INVALID FIELD IN CDB error: For a zone reset,
* this means that a reset of a conventional
* zone was attempted. Nothing to worry about in
* this case, so be quiet about the error.
*/
if (req_op(rq) == REQ_OP_ZONE_RESET)
rq->rq_flags |= RQF_QUIET;
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
break;
case 0x21:
/*
* INVALID ADDRESS FOR WRITE error: It is unlikely that
* retrying write requests failed with any kind of
* alignement error will result in success. So don't.
*/
cmd->allowed = 0;
break;
}
break;
case REQ_OP_ZONE_REPORT:
if (!result)
sd_zbc_report_zones_complete(cmd, good_bytes);
break;
}
}
/**
* Read zoned block device characteristics (VPD page B6).
*/
static int sd_zbc_read_zoned_characteristics(struct scsi_disk *sdkp,
unsigned char *buf)
{
if (scsi_get_vpd_page(sdkp->device, 0xb6, buf, 64)) {
sd_printk(KERN_NOTICE, sdkp,
"Unconstrained-read check failed\n");
return -ENODEV;
}
if (sdkp->device->type != TYPE_ZBC) {
/* Host-aware */
sdkp->urswrz = 1;
sdkp->zones_optimal_open = get_unaligned_be64(&buf[8]);
sdkp->zones_optimal_nonseq = get_unaligned_be64(&buf[12]);
sdkp->zones_max_open = 0;
} else {
/* Host-managed */
sdkp->urswrz = buf[4] & 1;
sdkp->zones_optimal_open = 0;
sdkp->zones_optimal_nonseq = 0;
sdkp->zones_max_open = get_unaligned_be64(&buf[16]);
}
return 0;
}
/**
* Check reported capacity.
*/
static int sd_zbc_check_capacity(struct scsi_disk *sdkp,
unsigned char *buf)
{
sector_t lba;
int ret;
if (sdkp->rc_basis != 0)
return 0;
/* Do a report zone to get the maximum LBA to check capacity */
ret = sd_zbc_report_zones(sdkp, buf, SD_BUF_SIZE, 0);
if (ret)
return ret;
/* The max_lba field is the capacity of this device */
lba = get_unaligned_be64(&buf[8]);
if (lba + 1 == sdkp->capacity)
return 0;
if (sdkp->first_scan)
sd_printk(KERN_WARNING, sdkp,
"Changing capacity from %llu to max LBA+1 %llu\n",
(unsigned long long)sdkp->capacity,
(unsigned long long)lba + 1);
sdkp->capacity = lba + 1;
return 0;
}
#define SD_ZBC_BUF_SIZE 131072
static int sd_zbc_check_zone_size(struct scsi_disk *sdkp)
{
u64 zone_blocks;
sector_t block = 0;
unsigned char *buf;
unsigned char *rec;
unsigned int buf_len;
unsigned int list_length;
int ret;
u8 same;
sdkp->zone_blocks = 0;
/* Get a buffer */
buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* Do a report zone to get the same field */
ret = sd_zbc_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0);
if (ret) {
zone_blocks = 0;
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
goto out;
}
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
same = buf[4] & 0x0f;
if (same > 0) {
rec = &buf[64];
zone_blocks = get_unaligned_be64(&rec[8]);
goto out;
}
/*
* Check the size of all zones: all zones must be of
* equal size, except the last zone which can be smaller
* than other zones.
*/
do {
/* Parse REPORT ZONES header */
list_length = get_unaligned_be32(&buf[0]) + 64;
rec = buf + 64;
if (list_length < SD_ZBC_BUF_SIZE)
buf_len = list_length;
else
buf_len = SD_ZBC_BUF_SIZE;
/* Parse zone descriptors */
while (rec < buf + buf_len) {
zone_blocks = get_unaligned_be64(&rec[8]);
if (sdkp->zone_blocks == 0) {
sdkp->zone_blocks = zone_blocks;
} else if (zone_blocks != sdkp->zone_blocks &&
(block + zone_blocks < sdkp->capacity
|| zone_blocks > sdkp->zone_blocks)) {
zone_blocks = 0;
goto out;
}
block += zone_blocks;
rec += 64;
}
if (block < sdkp->capacity) {
ret = sd_zbc_report_zones(sdkp, buf,
SD_ZBC_BUF_SIZE, block);
if (ret)
return ret;
}
} while (block < sdkp->capacity);
zone_blocks = sdkp->zone_blocks;
out:
kfree(buf);
if (!zone_blocks) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"Devices with non constant zone "
"size are not supported\n");
return -ENODEV;
}
if (!is_power_of_2(zone_blocks)) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"Devices with non power of 2 zone "
"size are not supported\n");
return -ENODEV;
}
if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"Zone size too large\n");
return -ENODEV;
}
sdkp->zone_blocks = zone_blocks;
return 0;
}
static int sd_zbc_setup(struct scsi_disk *sdkp)
{
/* chunk_sectors indicates the zone size */
blk_queue_chunk_sectors(sdkp->disk->queue,
logical_to_sectors(sdkp->device, sdkp->zone_blocks));
sdkp->zone_shift = ilog2(sdkp->zone_blocks);
sdkp->nr_zones = sdkp->capacity >> sdkp->zone_shift;
if (sdkp->capacity & (sdkp->zone_blocks - 1))
sdkp->nr_zones++;
if (!sdkp->zones_wlock) {
sdkp->zones_wlock = kcalloc(BITS_TO_LONGS(sdkp->nr_zones),
sizeof(unsigned long),
GFP_KERNEL);
if (!sdkp->zones_wlock)
return -ENOMEM;
}
return 0;
}
int sd_zbc_read_zones(struct scsi_disk *sdkp,
unsigned char *buf)
{
sector_t capacity;
int ret = 0;
if (!sd_is_zoned(sdkp))
/*
* Device managed or normal SCSI disk,
* no special handling required
*/
return 0;
/* Get zoned block device characteristics */
ret = sd_zbc_read_zoned_characteristics(sdkp, buf);
if (ret)
goto err;
/*
* Check for unconstrained reads: host-managed devices with
* constrained reads (drives failing read after write pointer)
* are not supported.
*/
if (!sdkp->urswrz) {
if (sdkp->first_scan)
sd_printk(KERN_NOTICE, sdkp,
"constrained reads devices are not supported\n");
ret = -ENODEV;
goto err;
}
/* Check capacity */
ret = sd_zbc_check_capacity(sdkp, buf);
if (ret)
goto err;
capacity = logical_to_sectors(sdkp->device, sdkp->capacity);
/*
* Check zone size: only devices with a constant zone size (except
* an eventual last runt zone) that is a power of 2 are supported.
*/
ret = sd_zbc_check_zone_size(sdkp);
if (ret)
goto err;
/* The drive satisfies the kernel restrictions: set it up */
ret = sd_zbc_setup(sdkp);
if (ret)
goto err;
/* READ16/WRITE16 is mandatory for ZBC disks */
sdkp->device->use_16_for_rw = 1;
sdkp->device->use_10_for_rw = 0;
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 14:40:34 +08:00
return 0;
err:
sdkp->capacity = 0;
return ret;
}
void sd_zbc_remove(struct scsi_disk *sdkp)
{
kfree(sdkp->zones_wlock);
sdkp->zones_wlock = NULL;
}
void sd_zbc_print_zones(struct scsi_disk *sdkp)
{
if (!sd_is_zoned(sdkp) || !sdkp->capacity)
return;
if (sdkp->capacity & (sdkp->zone_blocks - 1))
sd_printk(KERN_NOTICE, sdkp,
"%u zones of %u logical blocks + 1 runt zone\n",
sdkp->nr_zones - 1,
sdkp->zone_blocks);
else
sd_printk(KERN_NOTICE, sdkp,
"%u zones of %u logical blocks\n",
sdkp->nr_zones,
sdkp->zone_blocks);
}