UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/ata/ahci.c

1934 lines
51 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* ahci.c - AHCI SATA support
*
[libata] license change, other bits - changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-29 08:18:39 +08:00
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2004-2005 Red Hat, Inc.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* AHCI hardware documentation:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
[libata] license change, other bits - changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-29 08:18:39 +08:00
* http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
[PATCH] drivers/scsi/ahci: add #include req'd for the DMA_{64,32}BIT_MASK constants The previous patch did not compile cleanly on all architectures so here's a fixed one which #includes <linux/dma-mapping.h>. Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> diff -puN drivers/scsi/ahci.c~dma_mask-drivers_scsi_ahci drivers/scsi/ahci.c
2005-04-08 15:53:06 +08:00
#include <linux/dma-mapping.h>
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
#include <linux/device.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <scsi/scsi_host.h>
[libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines
2005-11-07 13:59:37 +08:00
#include <scsi/scsi_cmnd.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/libata.h>
#define DRV_NAME "ahci"
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
#define DRV_VERSION "2.3"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
enum {
AHCI_PCI_BAR = 5,
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
AHCI_MAX_PORTS = 32,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
use_clustering (sht) bit set to 0 in AHCI ? ahci: enable sg segment clustering The specification states that ahci supports segments up to 4MiB in size, so enable clustering. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-22 15:45:39 +08:00
AHCI_USE_CLUSTERING = 1,
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
AHCI_MAX_CMDS = 32,
[PATCH] ahci: clean up AHCI constants in preparation for NCQ * Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset. * Define MAX_CMDS and CMD_SZ and use them in calculation of other constants. * Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use it when calculating PRIV_DMA_SZ. * CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed because I didn't want to change the value used by the original code (32 commands). Later NCQ change will bump MAX_CMDS to 32 anyway and the hard coded 32 can be changed to MAX_CMDS then. * Reorder HOST_CAP_* flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:50 +08:00
AHCI_CMD_SZ = 32,
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
AHCI_RX_FIS_SZ = 256,
[libata] ahci: finish ATAPI support (hopefully)
2005-06-04 13:13:15 +08:00
AHCI_CMD_TBL_CDB = 0x40,
[PATCH] ahci: clean up AHCI constants in preparation for NCQ * Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset. * Define MAX_CMDS and CMD_SZ and use them in calculation of other constants. * Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use it when calculating PRIV_DMA_SZ. * CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed because I didn't want to change the value used by the original code (32 commands). Later NCQ change will bump MAX_CMDS to 32 anyway and the hard coded 32 can be changed to MAX_CMDS then. * Reorder HOST_CAP_* flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:50 +08:00
AHCI_CMD_TBL_HDR_SZ = 0x80,
AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
AHCI_RX_FIS_SZ,
AHCI_IRQ_ON_SG = (1 << 31),
AHCI_CMD_ATAPI = (1 << 5),
AHCI_CMD_WRITE = (1 << 6),
[PATCH] ahci: enable prefetching for PACKET commands Turn on AHCI_CMD_PREFETCH for PACKET commands. This hints the controller that it can prefetch the CDB and the PRD entries. This patch is originally from Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-12 10:25:27 +08:00
AHCI_CMD_PREFETCH = (1 << 7),
[PATCH] ahci: add constants for SRST Add constants needed to perform SRST. This is preparation for adding softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 20:38:44 +08:00
AHCI_CMD_RESET = (1 << 8),
AHCI_CMD_CLR_BUSY = (1 << 10),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
board_ahci = 0,
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
board_ahci_pi = 1,
board_ahci_vt8251 = 2,
board_ahci_ign_iferr = 3,
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
board_ahci_sb600 = 4,
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
board_ahci_mv = 5,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
HOST_CTL = 0x04, /* global host control */
HOST_IRQ_STAT = 0x08, /* interrupt status */
HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
[PATCH] ahci: add constants for SRST Add constants needed to perform SRST. This is preparation for adding softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 20:38:44 +08:00
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
[PATCH] ahci: add HOST_CAP_NCQ constant Add HOST_CAP_NCQ. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:52 +08:00
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
[PATCH] ahci: clean up AHCI constants in preparation for NCQ * Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset. * Define MAX_CMDS and CMD_SZ and use them in calculation of other constants. * Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use it when calculating PRIV_DMA_SZ. * CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed because I didn't want to change the value used by the original code (32 commands). Later NCQ change will bump MAX_CMDS to 32 anyway and the hard coded 32 can be changed to MAX_CMDS then. * Reorder HOST_CAP_* flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:50 +08:00
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
PORT_IRQ_STAT = 0x10, /* interrupt status */
PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
PORT_CMD = 0x18, /* port command */
PORT_TFDATA = 0x20, /* taskfile data */
PORT_SIG = 0x24, /* device TF signature */
PORT_CMD_ISSUE = 0x38, /* command issue */
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
PORT_IRQ_IF_ERR |
PORT_IRQ_CONNECT |
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
PORT_IRQ_PHYRDY |
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
PORT_IRQ_UNK_FIS,
PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
PORT_IRQ_TF_ERR |
PORT_IRQ_HBUS_DATA_ERR,
DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* PORT_CMD bits */
[libata ahci] set port ATAPI bit correctly Although according to the documentation this largely only affects desktop LED control, let's make sure we set the ATAPI bit when we have an ATAPI device attached to the port.
2005-11-12 14:32:19 +08:00
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
[PATCH] ahci: add constants for SRST Add constants needed to perform SRST. This is preparation for adding softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 20:38:44 +08:00
PORT_CMD_CLO = (1 << 3), /* Command list override */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
[libata] ahci: minor PCI MSI cleanup Replace 'have_msi' variable with a bit in the existing 'flags' variable,. AHCI_FLAG_MSI.
2005-06-04 12:50:22 +08:00
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
/* ap->flags bits */
[PATCH] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO Now that ahci_softreset() is fixed to automatically perform CLO if BSY/DRQ is set on entry, AHCI_FLAG_RESET_NEEDS_CLO is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 16:58:33 +08:00
AHCI_FLAG_NO_NCQ = (1 << 24),
AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */
ahci: disable 64bit dma on sb600 SB600 claims it can do 64bit DMA but it can't. Disable it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-18 22:23:19 +08:00
AHCI_FLAG_32BIT_ONLY = (1 << 28), /* force 32bit */
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
AHCI_FLAG_MV_PATA = (1 << 29), /* PATA port */
AHCI_FLAG_NO_MSI = (1 << 30), /* no PCI MSI */
ahci: consolidate common port flags Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 01:41:05 +08:00
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
libata-acpi: add ATA_FLAG_ACPI_SATA port flag Whether a controller needs IDE or SATA ACPI hierarchy is determined by the programming interface of the controller not by whether the controller is SATA or PATA, or it supports slave device or not. This patch adds ATA_FLAG_ACPI_SATA port flags which tells libata-acpi that the port needs SATA ACPI nodes, and sets the flag for ahci and sata_sil24. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-15 02:28:15 +08:00
ATA_FLAG_ACPI_SATA,
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
struct ahci_cmd_hdr {
u32 opts;
u32 status;
u32 tbl_addr;
u32 tbl_addr_hi;
u32 reserved[4];
};
struct ahci_sg {
u32 addr;
u32 addr_hi;
u32 reserved;
u32 flags_size;
};
struct ahci_host_priv {
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
u32 cap; /* cap to use */
u32 port_map; /* port map to use */
u32 saved_cap; /* saved initial cap */
u32 saved_port_map; /* saved initial port_map */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
struct ahci_port_priv {
struct ahci_cmd_hdr *cmd_slot;
dma_addr_t cmd_slot_dma;
void *cmd_tbl;
dma_addr_t cmd_tbl_dma;
void *rx_fis;
dma_addr_t rx_fis_dma;
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
/* for NCQ spurious interrupt analysis */
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
ahci: improve spurious SDB FIS handling Spurious SDB FIS during NCQ might not contain spurious completions. It could be spurious TF update or invalid async notification. Treat as HSM violation iff a spurious SDB FIS contains spurious completions; otherwise, just whine once about it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 12:24:19 +08:00
unsigned int ncq_saw_sdb:1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
[PATCH] libata: return AC_ERR_* from issue functions Return AC_ERR_* mask from issue fuctions instead of 0/-1. This enables things like failing a qc with AC_ERR_HSM when the device doesn't set DRDY when the qc is about to be issued. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 12:09:36 +08:00
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void ahci_irq_clear(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
static void ahci_error_handler(struct ata_port *ap);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
static void ahci_vt8251_error_handler(struct ata_port *ap);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
static int ahci_port_resume(struct ata_port *ap);
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines
2005-11-07 13:59:37 +08:00
static struct scsi_host_template ahci_sht = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
.change_queue_depth = ata_scsi_change_queue_depth,
.can_queue = AHCI_MAX_CMDS - 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = AHCI_MAX_SG,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = AHCI_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = AHCI_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
[PATCH] libata-hp: hook warmplug Hook transportt->user_scan() and hostt->slave_destroy(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:09 +08:00
.slave_destroy = ata_scsi_slave_destroy,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.bios_param = ata_std_bios_param,
};
libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-23 02:27:05 +08:00
static const struct ata_port_operations ahci_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.port_disable = ata_port_disable,
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.irq_clear = ahci_irq_clear,
libata: add another IRQ calls (libata drivers) This patch is against each libata driver. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26 15:27:58 +08:00
.irq_on = ata_dummy_irq_on,
.irq_ack = ata_dummy_irq_ack,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
static const struct ata_port_operations ahci_vt8251_ops = {
.port_disable = ata_port_disable,
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.irq_clear = ahci_irq_clear,
libata: add another IRQ calls (libata drivers) This patch is against each libata driver. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26 15:27:58 +08:00
.irq_on = ata_dummy_irq_on,
.irq_ack = ata_dummy_irq_ack,
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.error_handler = ahci_vt8251_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
[PATCH] mark several libata datastructures const Hi, the patch below marks several libata (and libata-driver) structures const so that they end up in the .rodata segment and don't false-share cachelines with things that get dirtied often. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-28 17:06:23 +08:00
static const struct ata_port_info ahci_port_info[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* board_ahci */
{
ahci: consolidate common port flags Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 01:41:05 +08:00
.flags = AHCI_FLAG_COMMON,
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
.link_flags = AHCI_LFLAG_COMMON,
[PATCH] libata: fix pio_mask values (take 2) ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO modes 3 and 4. The value read from the drive, which reports support for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd with 0x7 (which then corresponds to PIO 2-0 in libata). Thus, the drivers below need adjustments to comply with the way pio_mask is used. I changed the masks from the commented values to all support PIO4-0, since the spec mandates that PIO0-2 are supported and there's no reason not to support PIO3 IMO. Signed-off-by: Brett Russ <russb@emc.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-02 09:53:34 +08:00
.pio_mask = 0x1f, /* pio0-4 */
[libata] Clean up driver udma_mask initializers * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 13:13:16 +08:00
.udma_mask = ATA_UDMA6,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.port_ops = &ahci_ops,
},
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
/* board_ahci_pi */
{
ahci: consolidate common port flags Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 01:41:05 +08:00
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
.link_flags = AHCI_LFLAG_COMMON,
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
.pio_mask = 0x1f, /* pio0-4 */
[libata] Clean up driver udma_mask initializers * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 13:13:16 +08:00
.udma_mask = ATA_UDMA6,
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
.port_ops = &ahci_ops,
},
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
/* board_ahci_vt8251 */
{
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_NO_NCQ,
.link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
.pio_mask = 0x1f, /* pio0-4 */
[libata] Clean up driver udma_mask initializers * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 13:13:16 +08:00
.udma_mask = ATA_UDMA6,
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
.port_ops = &ahci_vt8251_ops,
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
},
[PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers JMicron AHCI controllers set PORT_IRQ_IF_ERR on device errors. The IRQ status bit indicates interface error or protocol mismatch and ahci driver interprets it into AC_ERR_ATA_BUS. So, whenever an ATAPI device raises check condition, ahci interprets it as ATA bus error and thus resets it which, in turn, raises check condition thus creating a reset loop and rendering the device unuseable. This patch makes JMB controllers ignore PORT_IRQ_IF_ERR when interpreting error condition. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Justin Tsai <justin@jmicron.com>
2006-11-29 10:33:14 +08:00
/* board_ahci_ign_iferr */
{
ahci: consolidate common port flags Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 01:41:05 +08:00
.flags = AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
.link_flags = AHCI_LFLAG_COMMON,
[PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers JMicron AHCI controllers set PORT_IRQ_IF_ERR on device errors. The IRQ status bit indicates interface error or protocol mismatch and ahci driver interprets it into AC_ERR_ATA_BUS. So, whenever an ATAPI device raises check condition, ahci interprets it as ATA bus error and thus resets it which, in turn, raises check condition thus creating a reset loop and rendering the device unuseable. This patch makes JMB controllers ignore PORT_IRQ_IF_ERR when interpreting error condition. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Justin Tsai <justin@jmicron.com>
2006-11-29 10:33:14 +08:00
.pio_mask = 0x1f, /* pio0-4 */
[libata] Clean up driver udma_mask initializers * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 13:13:16 +08:00
.udma_mask = ATA_UDMA6,
[PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers JMicron AHCI controllers set PORT_IRQ_IF_ERR on device errors. The IRQ status bit indicates interface error or protocol mismatch and ahci driver interprets it into AC_ERR_ATA_BUS. So, whenever an ATAPI device raises check condition, ahci interprets it as ATA bus error and thus resets it which, in turn, raises check condition thus creating a reset loop and rendering the device unuseable. This patch makes JMB controllers ignore PORT_IRQ_IF_ERR when interpreting error condition. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Justin Tsai <justin@jmicron.com>
2006-11-29 10:33:14 +08:00
.port_ops = &ahci_ops,
},
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
/* board_ahci_sb600 */
{
ahci: consolidate common port flags Consolidate common port flags into AHCI_FLAG_COMMON. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 01:41:05 +08:00
.flags = AHCI_FLAG_COMMON |
ahci: disable 64bit dma on sb600 SB600 claims it can do 64bit DMA but it can't. Disable it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-18 22:23:19 +08:00
AHCI_FLAG_IGN_SERR_INTERNAL |
AHCI_FLAG_32BIT_ONLY,
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
.link_flags = AHCI_LFLAG_COMMON,
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
.pio_mask = 0x1f, /* pio0-4 */
[libata] Clean up driver udma_mask initializers * Use ATA_UDMA* * Remove FIXME notations that once served to remind us to verify that these were indeed the correct UDMA masks. They are. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 13:13:16 +08:00
.udma_mask = ATA_UDMA6,
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
.port_ops = &ahci_ops,
},
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
/* board_ahci_mv */
{
.sht = &ahci_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
AHCI_FLAG_HONOR_PI | AHCI_FLAG_NO_NCQ |
AHCI_FLAG_NO_MSI | AHCI_FLAG_MV_PATA,
.link_flags = AHCI_LFLAG_COMMON,
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
[libata] constify PCI ID table in several drivers
2005-11-11 00:04:11 +08:00
static const struct pci_device_id ahci_pci_tbl[] = {
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
/* Intel */
[libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28 10:20:11 +08:00
{ PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
{ PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
ahci: make ULi M5288 ignore interface fatal error bit As with JMicron controllers, ULi M5288 sets interface fatal error bit on device error including ATAPI CC. This makes libata hardreset the port on ATAPI CC thus making it impossible to use. Ignore interface fatal error bit on ULi M5288. This fixes bugzilla bug #7837. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-23 14:13:39 +08:00
{ PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
[libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28 10:20:11 +08:00
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci_pi }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2822), board_ahci_pi }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci_pi }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci_pi }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci_pi }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x2922), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2923), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2924), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2925), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2927), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2929), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292a), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292b), board_ahci_pi }, /* ICH9M */
ahci: RAID mode SATA patch for Intel ICH9M This patch adds the Intel ICH9M RAID controller DID for SATA support. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-03 09:39:46 +08:00
{ PCI_VDEVICE(INTEL, 0x292c), board_ahci_pi }, /* ICH9M */
[PATCH] ahci: honor PORTS_IMPL on ICH8s Some ICH8s use non-linear port mapping. ahci driver didn't use to honor PORTS_IMPL and this made ports after hole nonfunctional. This patch makes ahci mark those ports as dummy and properly initialize all the implemented ports after the dummies. As it's unknown whether other AHCIs implement PORTS_IMPL register properly, new board id board_ahci_pi is added and selectively applied to ICH8s. All other AHCIs continue to use linear mapping regardless of PORTS_IMPL value. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-09 14:08:40 +08:00
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
ahci/pata_jmicron: match class not function number Make jmiron_ata quirk update pdev->class after programming the device and update ahci and pata_jmicron such that they match class code instead of checking function number manually. For ahci, it matches for vendor and class. For pata_jmicron, it matches vendor, device and class as IDE class isn't as well defined as AHCI class. This makes jmicron device matching more conventional and script friendly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-26 19:24:03 +08:00
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
/* ATI */
ahci.c: remove non-existing SB600 raid id (re-send) SB600 RAID and SB600 SATA is the same controller and share the same PCI ID 0x4380. There is no such PCI ID 0x4381. Signed-off-by: Conke Hu <conke.hu@gmail.com> --------- Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 18:23:14 +08:00
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
[libata] ahci: add ATI SB800 PCI IDs ATI/AMD SB800 shares some device IDs with SB700, and SB800 adds two more device IDs:0x4394,0x4395. Signed-off-by: henry su <henry.su.ati@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-21 04:07:33 +08:00
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
/* VIA */
[libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28 10:20:11 +08:00
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
ahci: add PCI ID for new VIA chip Add PCI ID for new VIA chip. Original patch is from Maarten Vanraes. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Maarten Vanraes <maarten.vanraes@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 16:27:14 +08:00
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
/* NVIDIA */
[libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28 10:20:11 +08:00
{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
[libata] Move some PCI IDs from sata_nv to ahci The content of memory map io of BAR5 have been change from MCP65 then sata_nv can't work fine on the platform based on MCP65 and MCP67, so move their IDs from sata_nv.c to ahci.c. Signed-off-by: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-21 03:18:00 +08:00
{ PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
[libata] Add support for AHCI controllers of MCP67. Signed-off-by: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-03 06:59:46 +08:00
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
ahci: Add MCP73/MCP77 support to AHCI driver Add the MCP73/MCP77 support to ahci driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-07 18:05:12 +08:00
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
[libata] ahci: Add NVIDIA PCI IDs. Based on a patch by Andrew Chew @ NVIDIA. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 11:05:36 +08:00
[libata] ahci: add SiS PCI IDs Signed-off-by: David Wang <touch@sis.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 16:10:14 +08:00
/* SiS */
[libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-28 10:20:11 +08:00
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
[libata] ahci: add SiS PCI IDs Signed-off-by: David Wang <touch@sis.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 16:10:14 +08:00
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
[libata] ahci: Match PCI class code for AHCI Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 18:10:42 +08:00
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09 18:32:51 +08:00
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
[libata] ahci: Match PCI class code for AHCI Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 18:10:42 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ } /* terminate list */
};
static struct pci_driver ahci_pci_driver = {
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
.remove = ata_pci_remove_one,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
.suspend = ahci_pci_device_suspend,
.resume = ahci_pci_device_resume,
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
[PATCH] ahci: preserve PORTS_IMPL over host resets Instead of writing 0xf blindly, preserve the content of write-once PORTS_IMPL register over host resets. This patch is taken from Jeff Garzik's AHCI init update patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-02 11:17:23 +08:00
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
}
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
static inline void __iomem *__ahci_port_base(struct ata_host *host,
unsigned int port_no)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
return mmio + 0x100 + (port_no * 0x80);
}
static inline void __iomem *ahci_port_base(struct ata_port *ap)
{
return __ahci_port_base(ap->host, ap->port_no);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
/**
* ahci_save_initial_config - Save and fixup initial config values
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
* @pdev: target PCI device
* @pi: associated ATA port info
* @hpriv: host private area to store config values
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
*
* Some registers containing configuration info might be setup by
* BIOS and might be cleared on reset. This function saves the
* initial values of those registers into @hpriv such that they
* can be restored after controller reset.
*
* If inconsistent, config values are fixed up by this function.
*
* LOCKING:
* None.
*/
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_save_initial_config(struct pci_dev *pdev,
const struct ata_port_info *pi,
struct ahci_host_priv *hpriv)
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
u32 cap, port_map;
ahci: move port_map handling to ahci_save_initial_config() Move cross checking between port_map and cap.n_ports into ahci_save_initial_config(). After save_initial_config is done, hpriv->port_map is always setup properly. Tested on JMB363, ICH7 and ICH8 (with dummy ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:26:53 +08:00
int i;
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
/* Values prefixed with saved_ are written back to host after
* reset. Values without are used for driver operation.
*/
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
ahci: make NO_NCQ handling more consistent ahci_save_initial_config() is responsible for reading, screening the host CAP register and storing the modified result into hpriv->cap for the rest of the driver. Move ATA_FLAG_NO_NCQ handling into ahci_save_initial_config(). It's more consistent this way and the rest of the driver can always refer to hpriv->cap to determine configured capability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
/* some chips have errata preventing 64bit use */
ahci: disable 64bit dma on sb600 SB600 claims it can do 64bit DMA but it can't. Disable it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-18 22:23:19 +08:00
if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do 64bit DMA, forcing 32bit\n");
cap &= ~HOST_CAP_64;
}
ahci: make NO_NCQ handling more consistent ahci_save_initial_config() is responsible for reading, screening the host CAP register and storing the modified result into hpriv->cap for the rest of the driver. Move ATA_FLAG_NO_NCQ handling into ahci_save_initial_config(). It's more consistent this way and the rest of the driver can always refer to hpriv->cap to determine configured capability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
if ((cap & HOST_CAP_NCQ) && (pi->flags & AHCI_FLAG_NO_NCQ)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do NCQ, turning off CAP_NCQ\n");
cap &= ~HOST_CAP_NCQ;
}
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
/* fixup zero port_map */
if (!port_map) {
ahci: fix PORTS_IMPL override If PORTS_IMPL register is zero, ahci initialize it to full mask corresponding to nr_ports in the CAP register. hpriv->cap, which is initialized at the end of the function, is incorrectly used as value of CAP causing ahci to always override PORTS_IMPL to 0x1 if it's zero. Fix it. This fixes a bug where early ich6 ahci can only access the first port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-19 17:52:56 +08:00
port_map = (1 << ahci_nr_ports(cap)) - 1;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
dev_printk(KERN_WARNING, &pdev->dev,
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
"PORTS_IMPL is zero, forcing 0x%x\n", port_map);
/* write the fixed up value to the PI register */
hpriv->saved_port_map = port_map;
}
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
* presence register, as bit 4 (counting from 0)
*/
if (pi->flags & AHCI_FLAG_MV_PATA) {
dev_printk(KERN_ERR, &pdev->dev,
"MV_AHCI HACK: port_map %x -> %x\n",
hpriv->port_map,
hpriv->port_map & 0xf);
port_map &= 0xf;
}
ahci: move port_map handling to ahci_save_initial_config() Move cross checking between port_map and cap.n_ports into ahci_save_initial_config(). After save_initial_config is done, hpriv->port_map is always setup properly. Tested on JMB363, ICH7 and ICH8 (with dummy ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:26:53 +08:00
/* cross check port_map and cap.n_ports */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (pi->flags & AHCI_FLAG_HONOR_PI) {
ahci: move port_map handling to ahci_save_initial_config() Move cross checking between port_map and cap.n_ports into ahci_save_initial_config(). After save_initial_config is done, hpriv->port_map is always setup properly. Tested on JMB363, ICH7 and ICH8 (with dummy ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:26:53 +08:00
u32 tmp_port_map = port_map;
int n_ports = ahci_nr_ports(cap);
for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
if (tmp_port_map & (1 << i)) {
n_ports--;
tmp_port_map &= ~(1 << i);
}
}
/* Whine if inconsistent. No need to update cap.
* port_map is used to determine number of ports.
*/
if (n_ports || tmp_port_map)
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
dev_printk(KERN_WARNING, &pdev->dev,
ahci: move port_map handling to ahci_save_initial_config() Move cross checking between port_map and cap.n_ports into ahci_save_initial_config(). After save_initial_config is done, hpriv->port_map is always setup properly. Tested on JMB363, ICH7 and ICH8 (with dummy ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:26:53 +08:00
"nr_ports (%u) and implemented port map "
"(0x%x) don't match\n",
ahci_nr_ports(cap), port_map);
} else {
/* fabricate port_map from cap.nr_ports */
port_map = (1 << ahci_nr_ports(cap)) - 1;
}
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
/* record values to use during operation */
hpriv->cap = cap;
hpriv->port_map = port_map;
}
/**
* ahci_restore_initial_config - Restore initial config
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
* @host: target ATA host
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
*
* Restore initial config stored by ahci_save_initial_config().
*
* LOCKING:
* None.
*/
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_restore_initial_config(struct ata_host *host)
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
writel(hpriv->saved_cap, mmio + HOST_CAP);
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
}
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
static const int offset[] = {
[SCR_STATUS] = PORT_SCR_STAT,
[SCR_CONTROL] = PORT_SCR_CTL,
[SCR_ERROR] = PORT_SCR_ERR,
[SCR_ACTIVE] = PORT_SCR_ACT,
[SCR_NOTIFICATION] = PORT_SCR_NTF,
};
struct ahci_host_priv *hpriv = ap->host->private_data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
if (sc_reg < ARRAY_SIZE(offset) &&
(sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
return offset[sc_reg];
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
int offset = ahci_scr_offset(ap, sc_reg);
if (offset) {
*val = readl(port_mmio + offset);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
return -EINVAL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
void __iomem *port_mmio = ahci_port_base(ap);
int offset = ahci_scr_offset(ap, sc_reg);
if (offset) {
writel(val, port_mmio + offset);
return 0;
}
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_start_engine(struct ata_port *ap)
[PATCH] ahci: separate out ahci_stop/start_engine Separate out ahci_stop/start_engine(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:36:34 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] ahci: separate out ahci_stop/start_engine Separate out ahci_stop/start_engine(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:36:34 +08:00
u32 tmp;
[PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
/* start DMA */
[PATCH] ahci: simplify ahci_start_engine() Simplify ahci_start_engine() by killing prerequisite condition checks. Rationales are.. * No user checks error return from ahci_start_engine() * Code flow guarantees the prerequisite conditions unless the controller is malfunctioning. In such cases, the driver had chances to learn about the problem _before_ calling this function. * Closely related to the above two, driver calls into this function even when prerequisites fail hoping for the best. Basically, ahci_start_engine() should only do the operation itself. It isn't the right place to check for prerequisites. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
tmp = readl(port_mmio + PORT_CMD);
[PATCH] ahci: separate out ahci_stop/start_engine Separate out ahci_stop/start_engine(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:36:34 +08:00
tmp |= PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static int ahci_stop_engine(struct ata_port *ap)
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
u32 tmp;
tmp = readl(port_mmio + PORT_CMD);
[PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
/* check if the HBA is idle */
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
return 0;
[PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
/* setting HBA to idle */
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
[PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
/* wait for engine to stop. This could be as long as 500 msec */
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
tmp = ata_wait_register(port_mmio + PORT_CMD,
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
[PATCH] ahci: cosmetic changes to ahci_start/stop_engine() * fascist-format comments according to comment style used in libata core layer. * if() -> if () Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
if (tmp & PORT_CMD_LIST_ON)
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
return -EIO;
return 0;
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_start_fis_rx(struct ata_port *ap)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 tmp;
/* set FIS registers */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (hpriv->cap & HOST_CAP_64)
writel((pp->cmd_slot_dma >> 16) >> 16,
port_mmio + PORT_LST_ADDR_HI);
writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (hpriv->cap & HOST_CAP_64)
writel((pp->rx_fis_dma >> 16) >> 16,
port_mmio + PORT_FIS_ADDR_HI);
writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
/* enable FIS reception */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_FIS_RX;
writel(tmp, port_mmio + PORT_CMD);
/* flush */
readl(port_mmio + PORT_CMD);
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static int ahci_stop_fis_rx(struct ata_port *ap)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 tmp;
/* disable FIS reception */
tmp = readl(port_mmio + PORT_CMD);
tmp &= ~PORT_CMD_FIS_RX;
writel(tmp, port_mmio + PORT_CMD);
/* wait for completion, spec says 500ms, give it 1000 */
tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
PORT_CMD_FIS_ON, 10, 1000);
if (tmp & PORT_CMD_FIS_ON)
return -EBUSY;
return 0;
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_power_up(struct ata_port *ap)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 cmd;
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
/* spin up device */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (hpriv->cap & HOST_CAP_SSS) {
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
cmd |= PORT_CMD_SPIN_UP;
writel(cmd, port_mmio + PORT_CMD);
}
/* wake up link */
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_power_down(struct ata_port *ap)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 cmd, scontrol;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (!(hpriv->cap & HOST_CAP_SSS))
ahci: don't enter slumber on power down Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-21 01:10:11 +08:00
return;
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
ahci: don't enter slumber on power down Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-21 01:10:11 +08:00
/* put device into listen mode, first set PxSCTL.DET to 0 */
scontrol = readl(port_mmio + PORT_SCR_CTL);
scontrol &= ~0xf;
writel(scontrol, port_mmio + PORT_SCR_CTL);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
ahci: don't enter slumber on power down Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-21 01:10:11 +08:00
/* then set PxCMD.SUD to 0 */
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
cmd &= ~PORT_CMD_SPIN_UP;
writel(cmd, port_mmio + PORT_CMD);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
}
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
static void ahci_start_port(struct ata_port *ap)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
/* enable FIS reception */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_start_fis_rx(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
/* enable DMA */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_start_engine(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
int rc;
/* disable DMA */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_stop_engine(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (rc) {
*emsg = "failed to stop engine";
return rc;
}
/* disable FIS reception */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_stop_fis_rx(ap);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (rc) {
*emsg = "failed stop FIS RX";
return rc;
}
return 0;
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static int ahci_reset_controller(struct ata_host *host)
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
u32 tmp;
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
/* global controller reset */
tmp = readl(mmio + HOST_CTL);
if ((tmp & HOST_RESET) == 0) {
writel(tmp | HOST_RESET, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
}
/* reset must complete within 1 second, or
* the hardware should be considered fried.
*/
ssleep(1);
tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_RESET) {
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
dev_printk(KERN_ERR, host->dev,
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
"controller reset failed (0x%x)\n", tmp);
return -EIO;
}
[PATCH] ahci: preserve PORTS_IMPL over host resets Instead of writing 0xf blindly, preserve the content of write-once PORTS_IMPL register over host resets. This patch is taken from Jeff Garzik's AHCI init update patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-02 11:17:23 +08:00
/* turn on AHCI mode */
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
writel(HOST_AHCI_EN, mmio + HOST_CTL);
(void) readl(mmio + HOST_CTL); /* flush */
[PATCH] ahci: preserve PORTS_IMPL over host resets Instead of writing 0xf blindly, preserve the content of write-once PORTS_IMPL register over host resets. This patch is taken from Jeff Garzik's AHCI init update patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-02 11:17:23 +08:00
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
/* some registers might be cleared on reset. restore initial values */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_restore_initial_config(host);
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
u16 tmp16;
/* configure PCS */
pci_read_config_word(pdev, 0x92, &tmp16);
tmp16 |= 0xf;
pci_write_config_word(pdev, 0x92, tmp16);
}
return 0;
}
[libata] ahci: Factor out SATA port init into a separate function Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 19:45:27 +08:00
static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
int port_no, void __iomem *mmio,
void __iomem *port_mmio)
{
const char *emsg = NULL;
int rc;
u32 tmp;
/* make sure port is not active */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
dev_printk(KERN_WARNING, &pdev->dev,
"%s (%d)\n", emsg, rc);
/* clear SError */
tmp = readl(port_mmio + PORT_SCR_ERR);
VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
writel(tmp, port_mmio + PORT_SCR_ERR);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << port_no, mmio + HOST_IRQ_STAT);
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_init_controller(struct ata_host *host)
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
[libata] ahci: Factor out SATA port init into a separate function Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 19:45:27 +08:00
int i;
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
void __iomem *port_mmio;
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 tmp;
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
if (host->ports[0]->flags & AHCI_FLAG_MV_PATA) {
port_mmio = __ahci_port_base(host, 4);
writel(0, port_mmio + PORT_IRQ_MASK);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
port_mmio = ahci_port_base(ap);
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
if (ata_port_is_dummy(ap))
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
continue;
[libata] ahci: Factor out SATA port init into a separate function Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 19:45:27 +08:00
ahci_port_init(pdev, ap, i, mmio, port_mmio);
[PATCH] ahci: separate out ahci_reset_controller() and ahci_init_controller() Separate out ahci_reset_controller() and ahci_init_controller() from ata_host_init(). These will be used by PM callbacks. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
}
tmp = readl(mmio + HOST_CTL);
VPRINTK("HOST_CTL 0x%x\n", tmp);
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL);
VPRINTK("HOST_CTL 0x%x\n", tmp);
}
[PATCH] ahci: separate out ahci_dev_classify Separate out ahci_dev_classify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:37:17 +08:00
static unsigned int ahci_dev_classify(struct ata_port *ap)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ata_taskfile tf;
[PATCH] ahci: separate out ahci_dev_classify Separate out ahci_dev_classify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:37:17 +08:00
u32 tmp;
tmp = readl(port_mmio + PORT_SIG);
tf.lbah = (tmp >> 24) & 0xff;
tf.lbam = (tmp >> 16) & 0xff;
tf.lbal = (tmp >> 8) & 0xff;
tf.nsect = (tmp) & 0xff;
return ata_dev_classify(&tf);
}
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts)
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
{
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
dma_addr_t cmd_tbl_dma;
cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
pp->cmd_slot[tag].opts = cpu_to_le32(opts);
pp->cmd_slot[tag].status = 0;
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
}
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
{
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
struct ahci_host_priv *hpriv = ap->host->private_data;
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
u32 tmp;
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
int busy, rc;
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
/* do we need to kick the port? */
busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
if (!busy && !force_restart)
return 0;
/* stop engine */
rc = ahci_stop_engine(ap);
if (rc)
goto out_restart;
/* need to do CLO? */
if (!busy) {
rc = 0;
goto out_restart;
}
if (!(hpriv->cap & HOST_CAP_CLO)) {
rc = -EOPNOTSUPP;
goto out_restart;
}
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
/* perform CLO */
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_CLO;
writel(tmp, port_mmio + PORT_CMD);
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
rc = 0;
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
tmp = ata_wait_register(port_mmio + PORT_CMD,
PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
if (tmp & PORT_CMD_CLO)
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
rc = -EIO;
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
/* restart engine */
out_restart:
ahci_start_engine(ap);
return rc;
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
}
ahci: separate out ahci_exec_polled_cmd() Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd() performs reset_engine before returning if the command fails (times out). This is to improve robustness. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
struct ata_taskfile *tf, int is_cmd, u16 flags,
unsigned long timeout_msec)
[PATCH] ahci: add support for VIA VT8251 Adds AHCI support for the VIA VT8251. Includes a workaround for a hardware bug which requires a Command List Override before softreset. Signed-off-by: Bastiaan Jacques <b.jacques@planet.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-17 20:17:59 +08:00
{
ahci: separate out ahci_exec_polled_cmd() Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd() performs reset_engine before returning if the command fails (times out). This is to improve robustness. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
const u32 cmd_fis_len = 5; /* five dwords */
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
struct ahci_port_priv *pp = ap->private_data;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
ahci: separate out ahci_exec_polled_cmd() Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd() performs reset_engine before returning if the command fails (times out). This is to improve robustness. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
u8 *fis = pp->cmd_tbl;
u32 tmp;
/* prep the command */
ata_tf_to_fis(tf, pmp, is_cmd, fis);
ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
/* issue & wait */
writel(1, port_mmio + PORT_CMD_ISSUE);
if (timeout_msec) {
tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1, timeout_msec);
if (tmp & 0x1) {
ahci_kick_engine(ap, 1);
return -EBUSY;
}
} else
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
return 0;
}
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
ahci: separate out ahci_do_softreset() Separate out ahci_do_softreset() which takes @pmp as its last argument. This will be used to implement ahci_pmp_softreset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
int pmp, unsigned long deadline)
ahci: separate out ahci_exec_polled_cmd() Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd() performs reset_engine before returning if the command fails (times out). This is to improve robustness. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
struct ata_port *ap = link->ap;
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
const char *reason = NULL;
ahci: use deadline instead of fixed timeout for 1st FIS for SRST Use deadline instead of fixed timeout for 1st FIS for SRST to improve robustness of SRST. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:38 +08:00
unsigned long now, msecs;
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
struct ata_taskfile tf;
int rc;
DPRINTK("ENTER\n");
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
if (ata_link_offline(link)) {
[PATCH] ahci: do not fail softreset if PHY reports no device All softreset methods are responsible for detecting device presence and succeed softreset in such cases. AHCI didn't use to check for device presence before proceeding with softreset and this caused unnecessary reset retrials during probing. This patch adds presence detection to AHCI softreset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-03 00:58:06 +08:00
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
return 0;
}
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
/* prepare for SRST (AHCI-1.1 10.4.1) */
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
rc = ahci_kick_engine(ap, 1);
if (rc)
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
ata_link_printk(link, KERN_WARNING,
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
"failed to reset engine (errno=%d)", rc);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
ata_tf_init(link->device, &tf);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
/* issue the first D2H Register FIS */
ahci: use deadline instead of fixed timeout for 1st FIS for SRST Use deadline instead of fixed timeout for 1st FIS for SRST to improve robustness of SRST. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:38 +08:00
msecs = 0;
now = jiffies;
if (time_after(now, deadline))
msecs = jiffies_to_msecs(deadline - now);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
tf.ctl |= ATA_SRST;
ahci: separate out ahci_do_softreset() Separate out ahci_do_softreset() which takes @pmp as its last argument. This will be used to implement ahci_pmp_softreset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
ahci: separate out ahci_exec_polled_cmd() Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd() performs reset_engine before returning if the command fails (times out). This is to improve robustness. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
rc = -EIO;
reason = "1st FIS failed";
goto fail;
}
/* spec says at least 5us, but be generous and sleep for 1ms */
msleep(1);
/* issue the second D2H Register FIS */
tf.ctl &= ~ATA_SRST;
ahci: separate out ahci_do_softreset() Separate out ahci_do_softreset() which takes @pmp as its last argument. This will be used to implement ahci_pmp_softreset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
/* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
* ATAPI devices in Hale Landis's ATADRVR, for the period of time
* between when the ATA command register is written, and then
* status is checked. Because waiting for "a while" before
* checking status is fine, post SRST, we perform this magic
* delay here as well.
*/
msleep(150);
libata: improve 0xff status handling For PATA, 0xff status indicates empty port. For SATA, it depends on how the controller emulates status register. On some controllers, 0xff is used to represent broken link or certain stage during reset. libata currently deals SATA the same. This hasn't caused any problem because problematic situations usually only occur after hotplug or other link disruption events and libata blindly waited for the device to spin up and settle after hotplug giving the link and device whatever time to go through those stages. libata is going to replace unconditional spinup wait with generic timed sequence of resets, so not only getting 0xff handling right for SATA is, well, the right thing to do, it's much more important now. This patch makes the following changes. * Make ata_bus_softreset() return -ENODEV if any of its wait fails due to 0xff status. * Fail soft/hardreset if status wait returns -ENODEV indicating 0xff status while SStatus says the link is online. e.g. Reset fails if status is 0xff after reset when SStatus reports the linke is online. If SCR registers are not available, everything is the same as before. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:50:52 +08:00
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
goto fail;
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
}
libata: improve 0xff status handling For PATA, 0xff status indicates empty port. For SATA, it depends on how the controller emulates status register. On some controllers, 0xff is used to represent broken link or certain stage during reset. libata currently deals SATA the same. This hasn't caused any problem because problematic situations usually only occur after hotplug or other link disruption events and libata blindly waited for the device to spin up and settle after hotplug giving the link and device whatever time to go through those stages. libata is going to replace unconditional spinup wait with generic timed sequence of resets, so not only getting 0xff handling right for SATA is, well, the right thing to do, it's much more important now. This patch makes the following changes. * Make ata_bus_softreset() return -ENODEV if any of its wait fails due to 0xff status. * Fail soft/hardreset if status wait returns -ENODEV indicating 0xff status while SStatus says the link is online. e.g. Reset fails if status is 0xff after reset when SStatus reports the linke is online. If SCR registers are not available, everything is the same as before. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:50:52 +08:00
*class = ahci_dev_classify(ap);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
DPRINTK("EXIT, class=%u\n", *class);
return 0;
fail:
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
[PATCH] ahci: add softreset Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 20:07:03 +08:00
return rc;
}
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
static int ahci_softreset(struct ata_link *link, unsigned int *class,
ahci: separate out ahci_do_softreset() Separate out ahci_do_softreset() which takes @pmp as its last argument. This will be used to implement ahci_pmp_softreset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
unsigned long deadline)
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
return ahci_do_softreset(link, class, 0, deadline);
ahci: separate out ahci_do_softreset() Separate out ahci_do_softreset() which takes @pmp as its last argument. This will be used to implement ahci_pmp_softreset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
}
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:50:52 +08:00
unsigned long deadline)
[PATCH] ahci: separate out ahci_dev_classify Separate out ahci_dev_classify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 21:37:17 +08:00
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
struct ata_port *ap = link->ap;
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
int rc;
DPRINTK("ENTER\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_stop_engine(ap);
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
/* clear D2H reception area to properly wait for D2H FIS */
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
ata_tf_init(link->device, &tf);
ahci: use 0x80 as wait stat value instead of 0xff Before hardreset, ahci initialized stat part of received FIS area to 0xff to wait for the first D2H Reg FIS which would change the value to device ready state. This used to work but now libata considers status value of 0xff as device not present making this wait prone to failure. This patch makes ahci use 0x80 for the wait stat value instead of 0xff to fix the above problem. Signed-off-by: Tejun Heo <htejun@gmail.com> drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-26 14:37:20 +08:00
tf.command = 0x80;
libata: add @is_cmd to ata_tf_to_fis() Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second byte which tells the device whether this H2D FIS is for a command or not. This cleans up ahci a bit and will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:38 +08:00
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
rc = sata_std_hardreset(link, class, deadline);
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_start_engine(ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
if (rc == 0 && ata_link_online(link))
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
*class = ahci_dev_classify(ap);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
return rc;
}
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:50:52 +08:00
unsigned long deadline)
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
struct ata_port *ap = link->ap;
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
u32 serror;
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
int rc;
DPRINTK("ENTER\n");
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_stop_engine(ap);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 15:50:52 +08:00
deadline);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
/* vt8251 needs SError cleared for the port to operate */
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
ahci_scr_read(ap, SCR_ERROR, &serror);
ahci_scr_write(ap, SCR_ERROR, serror);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_start_engine(ap);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
/* vt8251 doesn't clear BSY on signature FIS reception,
* request follow-up softreset.
*/
return rc ?: -EAGAIN;
}
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
static void ahci_postreset(struct ata_link *link, unsigned int *class)
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
struct ata_port *ap = link->ap;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
u32 new_tmp, tmp;
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:23 +08:00
ata_std_postreset(link, class);
[libata ahci] set port ATAPI bit correctly Although according to the documentation this largely only affects desktop LED control, let's make sure we set the ATAPI bit when we have an ATAPI device attached to the port.
2005-11-12 14:32:19 +08:00
/* Make sure port's ATAPI bit is set appropriately */
new_tmp = tmp = readl(port_mmio + PORT_CMD);
[PATCH] ahci: convert to new reset mechanism Convert ahci ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 15:26:02 +08:00
if (*class == ATA_DEV_ATAPI)
[libata ahci] set port ATAPI bit correctly Although according to the documentation this largely only affects desktop LED control, let's make sure we set the ATAPI bit when we have an ATAPI device attached to the port.
2005-11-12 14:32:19 +08:00
new_tmp |= PORT_CMD_ATAPI;
else
new_tmp &= ~PORT_CMD_ATAPI;
if (new_tmp != tmp) {
writel(new_tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static u8 ahci_check_status(struct ata_port *ap)
{
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
void __iomem *mmio = ap->ioaddr.cmd_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return readl(mmio + PORT_TFDATA) & 0xFF;
}
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
ata_tf_from_fis(d2h_fis, tf);
}
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
libata: fix ATAPI DMA alignment issues ATAPI needs to be padded to next 4 byte boundary, if misaligned. Original work by me, many fixes from Tejun Heo.
2005-10-05 19:13:30 +08:00
struct scatterlist *sg;
struct ahci_sg *ahci_sg;
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
unsigned int n_sg = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
VPRINTK("ENTER\n");
/*
* Next, the S/G list.
*/
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
libata: fix ATAPI DMA alignment issues ATAPI needs to be padded to next 4 byte boundary, if misaligned. Original work by me, many fixes from Tejun Heo.
2005-10-05 19:13:30 +08:00
ata_for_each_sg(sg, qc) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
ahci_sg->addr = cpu_to_le32(addr & 0xffffffff);
ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
ahci_sg->flags_size = cpu_to_le32(sg_len - 1);
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
libata: fix ATAPI DMA alignment issues ATAPI needs to be padded to next 4 byte boundary, if misaligned. Original work by me, many fixes from Tejun Heo.
2005-10-05 19:13:30 +08:00
ahci_sg++;
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
n_sg++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
return n_sg;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
[libata] ahci: finish ATAPI support (hopefully)
2005-06-04 13:13:15 +08:00
struct ata_port *ap = qc->ap;
struct ahci_port_priv *pp = ap->private_data;
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
int is_atapi = is_atapi_taskfile(&qc->tf);
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
void *cmd_tbl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 opts;
const u32 cmd_fis_len = 5; /* five dwords */
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
unsigned int n_elem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Fill in command table information. First, the header,
* a SATA Register - Host to Device command FIS.
*/
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
libata: add @is_cmd to ata_tf_to_fis() Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second byte which tells the device whether this H2D FIS is for a command or not. This cleans up ahci a bit and will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:38 +08:00
ata_tf_to_fis(&qc->tf, 0, 1, cmd_tbl);
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
if (is_atapi) {
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
[libata] ahci: finish ATAPI support (hopefully)
2005-06-04 13:13:15 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
n_elem = 0;
if (qc->flags & ATA_QCFLAG_DMAMAP)
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
n_elem = ahci_fill_sg(qc, cmd_tbl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: separate out ahci_fill_cmd_slot() Separate out ahci_fill_cmd_slot() from ahci_qc_prep(). ahci_fill_cmd_slot() can later be used to issue non-standard commands. (e.g. softreset) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 16:25:47 +08:00
/*
* Fill in command slot information.
*/
opts = cmd_fis_len | n_elem << 16;
if (qc->tf.flags & ATA_TFLAG_WRITE)
opts |= AHCI_CMD_WRITE;
if (is_atapi)
[PATCH] ahci: enable prefetching for PACKET commands Turn on AHCI_CMD_PREFETCH for PACKET commands. This hints the controller that it can prefetch the CDB and the PRD entries. This patch is originally from Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-12 10:25:27 +08:00
opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
[libata ahci, qstor] fix miscount of scatter/gather entries Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-12 14:27:07 +08:00
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
ahci_fill_cmd_slot(pp, qc->tag, opts);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
struct ahci_port_priv *pp = ap->private_data;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
struct ata_eh_info *ehi = &ap->link.eh_info;
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
unsigned int err_mask = 0, action = 0;
struct ata_queued_cmd *qc;
u32 serror;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
ata_ehi_clear_desc(ehi);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* AHCI needs SError cleared; otherwise, it might lock up */
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
ahci_scr_read(ap, SCR_ERROR, &serror);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
ahci_scr_write(ap, SCR_ERROR, serror);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* analyze @irq_stat */
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
[PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers JMicron AHCI controllers set PORT_IRQ_IF_ERR on device errors. The IRQ status bit indicates interface error or protocol mismatch and ahci driver interprets it into AC_ERR_ATA_BUS. So, whenever an ATAPI device raises check condition, ahci interprets it as ATA bus error and thus resets it which, in turn, raises check condition thus creating a reset loop and rendering the device unuseable. This patch makes JMB controllers ignore PORT_IRQ_IF_ERR when interpreting error condition. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Justin Tsai <justin@jmicron.com>
2006-11-29 10:33:14 +08:00
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR)
irq_stat &= ~PORT_IRQ_IF_ERR;
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
if (irq_stat & PORT_IRQ_TF_ERR) {
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
err_mask |= AC_ERR_DEV;
ahci.c: walkaround for SB600 SATA internal error issue There is a HW issue in ATI SB600 SATA that PxSERR.E should not be set on some conditions, for example, when there is no media in SATA CD/DVD drive or media is not ready, AHCI controller fails to execute ATAPI commands and reports PORT_IRQ_TF_ERR, but ATI SB600 SATA controller sets PxSERR.E at the same time, which is not necessary. This patch is just to ignore the INTERNAL ERROR in such case. Without this patch, ahci error handler will report many errors as below: ----------- cut from dmesg ----------- ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 res 51/24:03:00:00:20/00:00:00:00:00/a0 Emask 0x40 (internal error) ata9: soft resetting port ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata9.00: configured for UDMA/33 ata9: EH complete ata9.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 ata9.00: (irq_stat 0x40000001) ata9.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) -------- end cut --------- Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 18:33:05 +08:00
if (ap->flags & AHCI_FLAG_IGN_SERR_INTERNAL)
serror &= ~SERR_INTERNAL;
}
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
err_mask |= AC_ERR_HOST_BUS;
action |= ATA_EH_SOFTRESET;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (irq_stat & PORT_IRQ_IF_ERR) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_SOFTRESET;
libata: improve EH report formatting Requiring LLDs to format multiple error description messages properly doesn't work too well. Help LLDs a bit by making ata_ehi_push_desc() insert ", " on each invocation. __ata_ehi_push_desc() is the raw version without the automatic separator. While at it, make ehi_desc interface proper functions instead of macros. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
ata_ehi_push_desc(ehi, "interface fatal error");
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
[PATCH] ahci: convert to new probing mechanism and add hotplug support Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY, marking ehi for hotplug and scheduling EH on CONNECT/PHYRDY interrupts. Unfortunately, ahci cannot reliably wait for the first D2H FIS after hotplug. It sometimes succeeds but times out more often than not, so ATA_FLAG_SKIP_D2H_BSY is used. This patch also fixes ahci_hardreset() such that D2H Register FIS RX area is cleared before issuing COMRESET. Without this, ata_busy_sleep() after COMRESET might prematually finish if the previous TF contains DRDY && !BSY. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:28:18 +08:00
ata_ehi_hotplugged(ehi);
libata: improve EH report formatting Requiring LLDs to format multiple error description messages properly doesn't work too well. Help LLDs a bit by making ata_ehi_push_desc() insert ", " on each invocation. __ata_ehi_push_desc() is the raw version without the automatic separator. While at it, make ehi_desc interface proper functions instead of macros. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
ata_ehi_push_desc(ehi, "%s", irq_stat & PORT_IRQ_CONNECT ?
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
"connection status changed" : "PHY RDY changed");
}
if (irq_stat & PORT_IRQ_UNK_FIS) {
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
err_mask |= AC_ERR_HSM;
action |= ATA_EH_SOFTRESET;
libata: improve EH report formatting Requiring LLDs to format multiple error description messages properly doesn't work too well. Help LLDs a bit by making ata_ehi_push_desc() insert ", " on each invocation. __ata_ehi_push_desc() is the raw version without the automatic separator. While at it, make ehi_desc interface proper functions instead of macros. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
ata_ehi_push_desc(ehi, "unknown FIS %08x %08x %08x %08x",
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
unk[0], unk[1], unk[2], unk[3]);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* okay, let's hand over to EH */
ehi->serror |= serror;
ehi->action |= action;
libata: fix EH locking Wrap ata_qc_complete() calls in EH context in spinlocks, to prevent races (mainly in ATAPI code paths).
2005-08-26 10:01:20 +08:00
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
qc = ata_qc_from_tag(ap, ap->link.active_tag);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (qc)
qc->err_mask |= err_mask;
else
ehi->err_mask |= err_mask;
[PATCH] libata: implement and apply ata_eh_qc_complete/retry() Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and scsi_eh_flush_done_q(). This removes all eh scsicmd finish hacks from low level drivers. This change was first suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 12:09:37 +08:00
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (irq_stat & PORT_IRQ_FREEZE)
ata_port_freeze(ap);
else
ata_port_abort(ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
static void ahci_port_intr(struct ata_port *ap)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
struct ata_eh_info *ehi = &ap->link.eh_info;
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
struct ahci_port_priv *pp = ap->private_data;
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
u32 status, qc_active;
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
int rc, known_irq = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
if (unlikely(status & PORT_IRQ_ERROR)) {
ahci_error_intr(ap, status);
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[libata] ahci: send event when AN received When we get an SDB FIS with the 'N' bit set, we should send an event to user space to indicate that there has been a media change. This will be done via the scsi device. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 16:11:25 +08:00
if (status & PORT_IRQ_SDB_FIS) {
/*
* if this is an ATAPI device with AN turned on,
* then we should interrogate the device to
* determine the cause of the interrupt
*
* for AN - this we should check the SDB FIS
* and find the I and N bits set
*/
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
u32 f0 = le32_to_cpu(f[0]);
/* check the 'N' bit in word 0 of the FIS */
if (f0 & (1 << 15)) {
int port_addr = ((f0 & 0x00000f00) >> 8);
struct ata_device *adev;
if (port_addr < ATA_MAX_DEVICES) {
adev = &ap->link.device[port_addr];
if (adev->flags & ATA_DFLAG_AN)
ata_scsi_media_change_notify(adev);
}
}
}
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
if (ap->link.sactive)
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
qc_active = readl(port_mmio + PORT_SCR_ACT);
else
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
if (rc > 0)
return;
if (rc < 0) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] ahci: add PIOS interim interrupt handling During multiblock PIO, multiple PIOS interrupts are generated before qc compltion. Current code prints unnecessary message for such cases. This is exposed when new EH slows down attached device into PIO mode. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:30 +08:00
/* hmmm... a spurious interupt */
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
/* if !NCQ, ignore. No modern ATA device has broken HSM
* implementation for non-NCQ commands.
*/
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
if (!ap->link.sactive)
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
return;
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
if (status & PORT_IRQ_D2H_REG_FIS) {
if (!pp->ncq_saw_d2h)
ata_port_printk(ap, KERN_INFO,
"D2H reg with I during NCQ, "
"this message won't be printed again\n");
pp->ncq_saw_d2h = 1;
known_irq = 1;
}
if (status & PORT_IRQ_DMAS_FIS) {
if (!pp->ncq_saw_dmas)
ata_port_printk(ap, KERN_INFO,
"DMAS FIS during NCQ, "
"this message won't be printed again\n");
pp->ncq_saw_dmas = 1;
known_irq = 1;
}
ahci: consider SDB FIS containing spurious NCQ completions HSM violation (regenerated) SDB FIS containing spurious NCQ completions is a clear protocol violation. Currently, only some Maxtors with early firmware revisions are showing this problem. Those firmwares have other NCQ related problems including buggy NCQ error reporting and occasional lock up after NCQ errors. Consider spurious NCQ completions HSM violation and freeze the port after it. EH will turn off NCQ after this happens several times. Eventually drives which show this behavior should be blacklisted for NCQ. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21 15:34:25 +08:00
if (status & PORT_IRQ_SDB_FIS) {
[PATCH] ahci: trivial endianness annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 00:39:30 +08:00
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
ahci: improve spurious SDB FIS handling Spurious SDB FIS during NCQ might not contain spurious completions. It could be spurious TF update or invalid async notification. Treat as HSM violation iff a spurious SDB FIS contains spurious completions; otherwise, just whine once about it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 12:24:19 +08:00
if (le32_to_cpu(f[1])) {
/* SDB FIS containing spurious completions
* might be dangerous, whine and fail commands
* with HSM violation. EH will turn off NCQ
* after several such failures.
*/
ata_ehi_push_desc(ehi,
"spurious completions during NCQ "
"issue=0x%x SAct=0x%x FIS=%08x:%08x",
readl(port_mmio + PORT_CMD_ISSUE),
readl(port_mmio + PORT_SCR_ACT),
le32_to_cpu(f[0]), le32_to_cpu(f[1]));
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
} else {
if (!pp->ncq_saw_sdb)
ata_port_printk(ap, KERN_INFO,
"spurious SDB FIS %08x:%08x during NCQ, "
"this message won't be printed again\n",
le32_to_cpu(f[0]), le32_to_cpu(f[1]));
pp->ncq_saw_sdb = 1;
}
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
known_irq = 1;
}
[PATCH] ahci: add PIOS interim interrupt handling During multiblock PIO, multiple PIOS interrupts are generated before qc compltion. Current code prints unnecessary message for such cases. This is exposed when new EH slows down attached device into PIO mode. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:30 +08:00
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
if (!known_irq)
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
ahci: improve and limit spurious interrupt messages, take#3 We're still seeing a lot of issues with NCQ implementation in drive firmwares. Sprious FISes during NCQ command phase occur on many drives and some of them seem potentially dangerous (at least to me). Until we find the solution, spurious messages can give us more info. Improve and limit them such that more info can be reported while not disturbing users too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-25 18:16:28 +08:00
"(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 17:36:22 +08:00
status, ap->link.active_tag, ap->link.sactive);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void ahci_irq_clear(struct ata_port *ap)
{
/* TODO */
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
struct ata_host *host = dev_instance;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
[libata] __iomem annotations for various drivers
2005-08-30 17:18:18 +08:00
void __iomem *mmio;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 irq_stat, irq_ack = 0;
VPRINTK("ENTER\n");
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
hpriv = host->private_data;
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
mmio = host->iomap[AHCI_PCI_BAR];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* sigh. 0xffffffff is a valid return from h/w */
irq_stat = readl(mmio + HOST_IRQ_STAT);
irq_stat &= hpriv->port_map;
if (!irq_stat)
return IRQ_NONE;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
spin_lock(&host->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
for (i = 0; i < host->n_ports; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ata_port *ap;
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 14:58:32 +08:00
if (!(irq_stat & (1 << i)))
continue;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
ap = host->ports[i];
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 14:58:32 +08:00
if (ap) {
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
ahci_port_intr(ap);
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 14:58:32 +08:00
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
[PATCH] ahci: fix NULL pointer dereference detected by Coverity Fix NULL pointer dereference detected by the Coverity checker. Kill dev -> pdev -> dev conversion while at it. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 11:47:54 +08:00
if (ata_ratelimit())
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
dev_printk(KERN_WARNING, host->dev,
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
"interrupt on disabled port %u\n", i);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 14:58:32 +08:00
irq_ack |= (1 << i);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (irq_ack) {
writel(irq_ack, mmio + HOST_IRQ_STAT);
handled = 1;
}
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
spin_unlock(&host->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
VPRINTK("EXIT\n");
return IRQ_RETVAL(handled);
}
[PATCH] libata: return AC_ERR_* from issue functions Return AC_ERR_* mask from issue fuctions instead of 0/-1. This enables things like failing a qc with AC_ERR_HSM when the device doesn't set DRDY when the qc is about to be issued. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-23 12:09:36 +08:00
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct ata_port *ap = qc->ap;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
if (qc->tf.protocol == ATA_PROT_NCQ)
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
return 0;
}
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
static void ahci_freeze(struct ata_port *ap)
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* turn IRQ off */
writel(0, port_mmio + PORT_IRQ_MASK);
}
static void ahci_thaw(struct ata_port *ap)
{
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
void __iomem *port_mmio = ahci_port_base(ap);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
u32 tmp;
/* clear IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
writel(tmp, port_mmio + PORT_IRQ_STAT);
ahci: port_no should be used when clearing IRQ in ahci_thaw() ap->id is logcial port ID which is unique among all ATA ports and doesn't have anything to do with hardware port index. ap->port_no is the hardware port index and thus should be used when clearing IRQ mask in ahci_thaw(). This problem has been spotted by Jeff Garzik <jgarzik@pobox.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-27 10:04:26 +08:00
writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* turn IRQ back on */
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
}
static void ahci_error_handler(struct ata_port *ap)
{
[PATCH] libata: add ap->pflags and move core dynamic flags to it ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-29 00:29:30 +08:00
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
/* restart engine */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_stop_engine(ap);
ahci_start_engine(ap);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
}
/* perform recovery */
[PATCH] ahci: kill AHCI_FLAG_RESET_NEEDS_CLO Now that ahci_softreset() is fixed to automatically perform CLO if BSY/DRQ is set on entry, AHCI_FLAG_RESET_NEEDS_CLO is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 16:58:33 +08:00
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset,
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 17:27:48 +08:00
ahci_postreset);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
}
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
static void ahci_vt8251_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_stop_engine(ap);
ahci_start_engine(ap);
[PATCH] ahci: update ahci-vt8251 reset sequence ahci-vt8251 * requires hardreset after PHY status change * doesn't clear BSY on signature FIS after hardreset * needs SError cleared for the port to operate after hardreset This patch implements ahci_vt8251_hardreset() and sets ATA_FLAG_HRST_TO_RESUME to handle the above behaviors. This fixes EH including hotplug on vt8251. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 17:00:24 +08:00
}
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
ahci_postreset);
}
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
ahci: separate out ahci_kick_engine() Separate out stop_engine - CLO - start_engine sequence from ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in ahci_softreset() and ahci_post_internal_cmd(). The function will also be used to prepare for and clean up after PMP register access commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:39 +08:00
/* make DMA engine forget about the failed command */
if (qc->flags & ATA_QCFLAG_FAILED)
ahci_kick_engine(ap, 1);
[PATCH] ahci: convert to new EH Convert AHCI to new EH. Unfortunately, ICH7 AHCI reacts badly if IRQ mask is diddled during operation. So, freezing is implemented by unconditionally clearing interrupt conditions while frozen. * Interrupts are categorized according to required action. e.g. Connection status or unknown FIS error requires freezing the port while TF or HBUS_DATA don't. * Only CONNECT (reflects SErr.X) interrupt is taken into account not PHYRDY (SErr.N), as CONNECT is better cue for starting EH. * AHCI may be invoked without any active command. e.g. CONNECT irq occuring while no qc in progress still triggers EH and will reset the port and revalidate attached device. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 19:58:29 +08:00
}
ahci.c: fix CONFIG_PM=n compilation Commit df69c9c5438b4e396a64d42608b2a6c48a3e7475 moved only prototype of out of CONFIG_PM. Move function out as well. Box seems to boot fine. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-18 03:48:48 +08:00
static int ahci_port_resume(struct ata_port *ap)
{
ahci_power_up(ap);
ahci_start_port(ap);
return 0;
}
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#ifdef CONFIG_PM
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
const char *emsg = NULL;
int rc;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_deinit_port(ap, &emsg);
[PATCH] ahci: do not powerdown during initialization ahci_init_controller() calls ahci_deinit_port() to make sure the controller is stopped before initializing the controller. In turn, ahci_deinit_port() invokes ahci_power_down() to power down the port. If the controller supports slumber mode, the link is put into it. Unfortunately, some devices don't implement link powersaving mode properly and show erratic behavior after link is put into slumber mode. For example, HL-DT-ST DVD-RAM GSA-H30N completely locks up on slumber transition and can only be recovered with the *REAL* hard reset - power removal and reapply. Note that this makes the first probing reset different from all others. If the above dvd-ram is hotplugged after ahci is initialized, no problem occurs because ahci is already fully initialized with phy powered up. So, this might also be the reason for other weird AHCI initial probing abnormalities. This patch moves power up/down out of port init/deinit and call them only when needed. Power down is now called only when suspending. As system suspend usually involves powering down 12v for storage devices, this shouldn't cause problem even if the attached device doesn't support slumber mode. However, in partial power management and suspend failure cases, devices might lock up after suspend attempt. I thought about removing transition to slumber mode altogether but ahci spec mandates it before HBA D3 state transition. Blacklisting such devices might be the solution. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-20 14:42:36 +08:00
if (rc == 0)
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_power_down(ap);
[PATCH] ahci: do not powerdown during initialization ahci_init_controller() calls ahci_deinit_port() to make sure the controller is stopped before initializing the controller. In turn, ahci_deinit_port() invokes ahci_power_down() to power down the port. If the controller supports slumber mode, the link is put into it. Unfortunately, some devices don't implement link powersaving mode properly and show erratic behavior after link is put into slumber mode. For example, HL-DT-ST DVD-RAM GSA-H30N completely locks up on slumber transition and can only be recovered with the *REAL* hard reset - power removal and reapply. Note that this makes the first probing reset different from all others. If the above dvd-ram is hotplugged after ahci is initialized, no problem occurs because ahci is already fully initialized with phy powered up. So, this might also be the reason for other weird AHCI initial probing abnormalities. This patch moves power up/down out of port init/deinit and call them only when needed. Power down is now called only when suspending. As system suspend usually involves powering down 12v for storage devices, this shouldn't cause problem even if the attached device doesn't support slumber mode. However, in partial power management and suspend failure cases, devices might lock up after suspend attempt. I thought about removing transition to slumber mode altogether but ahci spec mandates it before HBA D3 state transition. Blacklisting such devices might be the solution. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-20 14:42:36 +08:00
else {
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
ahci_start_port(ap);
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
}
return rc;
}
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
struct ata_host *host = dev_get_drvdata(&pdev->dev);
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
u32 ctl;
if (mesg.event == PM_EVENT_SUSPEND) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
}
return ata_pci_device_suspend(pdev, mesg);
}
static int ahci_pci_device_resume(struct pci_dev *pdev)
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
struct ata_host *host = dev_get_drvdata(&pdev->dev);
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
int rc;
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 18:39:50 +08:00
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_reset_controller(host);
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (rc)
return rc;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_init_controller(host);
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
}
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
ata_host_resume(host);
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
return 0;
}
libata: add missing CONFIG_PM in LLDs Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 16:31:26 +08:00
#endif
[PATCH] ahci: implement Power Management support Implement power management support. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
static int ahci_port_start(struct ata_port *ap)
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 15:19:22 +08:00
struct device *dev = ap->host->dev;
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
struct ahci_port_priv *pp;
void *mem;
dma_addr_t mem_dma;
int rc;
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
if (!pp)
return -ENOMEM;
rc = ata_pad_alloc(ap, dev);
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
if (rc)
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
return rc;
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
return -ENOMEM;
memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
/*
* First item in chunk of DMA memory: 32-slot command table,
* 32 bytes each in size
*/
pp->cmd_slot = mem;
pp->cmd_slot_dma = mem_dma;
mem += AHCI_CMD_SLOT_SZ;
mem_dma += AHCI_CMD_SLOT_SZ;
/*
* Second item: Received-FIS area
*/
pp->rx_fis = mem;
pp->rx_fis_dma = mem_dma;
mem += AHCI_RX_FIS_SZ;
mem_dma += AHCI_RX_FIS_SZ;
/*
* Third item: data area for storing a single command
* and its scatter-gather table
*/
pp->cmd_tbl = mem;
pp->cmd_tbl_dma = mem_dma;
ap->private_data = pp;
[libata] ahci: minor internal cleanups Function renaming and factorization. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 08:46:51 +08:00
/* engage engines, captain */
return ahci_port_resume(ap);
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
}
static void ahci_port_stop(struct ata_port *ap)
{
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
const char *emsg = NULL;
int rc;
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
/* de-initialize port */
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_deinit_port(ap, &emsg);
[PATCH] libata: improve driver initialization and deinitialization Implement ahci_[de]init_port() and use it during initialization and de-initialization. ahci_[de]init_port() are supersets of what used to be done during driver [de-]initialization. This patch makes the following behavior changes. * Per-port IRQ mask is cleared on driver load as done in other drivers. The mask will be configured properly during probe. * During init_one(), HOST_IRQ_STAT is cleared after masking port IRQs such that there is no race window. * CMD_SPIN_UP is cleared during init_one() instead of being set. It is set in port_start(). This is more consistent with overall structure of initialization. Note that CMD_SPIN_UP simply controls PHY activation. * Slumber and staggered spin-up are handled properly. * All init/deinit operations are done in step-by-step manner as described in the spec instead of issued as single merged command. Original implementation is from Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:26 +08:00
if (rc)
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
[PATCH] ahci: relocate several internal functions * move ahci_port_start/stop() below EH functions. This makes ahci more consistent with other drivers and makes prototypes for ahci_start/stop_engine() unnecessary. * swap positions between ahci_start_engine() and ahci_stop_engine() for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 14:59:25 +08:00
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int rc;
if (using_dac &&
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return rc;
}
}
return 0;
}
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
static void ahci_print_info(struct ata_host *host)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 vers, cap, impl, speed;
const char *speed_s;
u16 cc;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = hpriv->cap;
impl = hpriv->port_map;
speed = (cap >> 20) & 0xf;
if (speed == 1)
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
else
speed_s = "?";
pci_read_config_word(pdev, 0x0a, &cc);
Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09 18:32:51 +08:00
if (cc == PCI_CLASS_STORAGE_IDE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
scc_s = "IDE";
Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09 18:32:51 +08:00
else if (cc == PCI_CLASS_STORAGE_SATA)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
scc_s = "SATA";
Add pci class code for SATA & AHCI, and replace some magic numbers. Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-09 18:32:51 +08:00
else if (cc == PCI_CLASS_STORAGE_RAID)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
scc_s = "RAID";
else
scc_s = "unknown";
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_INFO, &pdev->dev,
"AHCI %02x%02x.%02x%02x "
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
,
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
(vers >> 8) & 0xff,
vers & 0xff,
((cap >> 8) & 0x1f) + 1,
(cap & 0x1f) + 1,
speed_s,
impl,
scc_s);
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_INFO, &pdev->dev,
"flags: "
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
"%s%s%s%s%s%s%s"
"%s%s%s%s%s%s%s\n"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
,
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
cap & (1 << 29) ? "sntf " : "",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 27) ? "stag " : "",
cap & (1 << 26) ? "pm " : "",
cap & (1 << 25) ? "led " : "",
cap & (1 << 24) ? "clo " : "",
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
cap & (1 << 13) ? "part " : ""
);
}
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
static int printed_version;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ata_port_info pi = ahci_port_info[ent->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
struct device *dev = &pdev->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ahci_host_priv *hpriv;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
struct ata_host *host;
int i, rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
VPRINTK("ENTER\n");
[PATCH] ahci: implement NCQ suppport Implement NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:03:55 +08:00
WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!printed_version++)
[libata] use dev_printk() throughout drivers A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-31 03:39:11 +08:00
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
/* acquire resources */
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
rc = pcim_enable_device(pdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rc)
return rc;
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
rc = pcim_iomap_regions(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
if (rc == -EBUSY)
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
pcim_pin_device(pdev);
libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-01 14:06:36 +08:00
if (rc)
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) Add support for the SATA portion of Marvell's AHCI-compatible chips. The PATA port capability, also available via AHCI, is disabled until support is completed. NCQ and PCI MSI are disabled by default. Marvell says "we use NCQ" in their drivers but "we do not use PCI MSI." Theoretically that implies we need to fix ahci.c to work with Marvell NCQ, but one wonders why Marvell NCQ is any different from other AHCI chips. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 14:29:42 +08:00
if ((pi.flags & AHCI_FLAG_NO_MSI) || pci_enable_msi(pdev))
[libata ahci] support PCI MSI interrupt vector
2005-05-13 03:03:42 +08:00
pci_intx(pdev, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
/* save initial config */
ahci_save_initial_config(pdev, &pi, hpriv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
/* prepare host */
ahci: make NO_NCQ handling more consistent ahci_save_initial_config() is responsible for reading, screening the host CAP register and storing the modified result into hpriv->cap for the rest of the driver. Move ATA_FLAG_NO_NCQ handling into ahci_save_initial_config(). It's more consistent this way and the rest of the driver can always refer to hpriv->cap to determine configured capability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
if (hpriv->cap & HOST_CAP_NCQ)
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
pi.flags |= ATA_FLAG_NCQ;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map));
if (!host)
return -ENOMEM;
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
for (i = 0; i < host->n_ports; i++) {
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
struct ata_port *ap = host->ports[i];
void __iomem *port_mmio = ahci_port_base(ap);
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
/* standard SATA port setup */
ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-16 13:29:40 +08:00
if (hpriv->port_map & (1 << i))
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ap->ioaddr.cmd_addr = port_mmio;
[libata] ahci: minor internal cleanups Minor cleanups, in preparation for merging Marvell PATA AHCI support in the future. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-28 20:33:01 +08:00
/* disabled/not-implemented port */
else
ap->ops = &ata_dummy_port_ops;
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
}
ahci: implement ata_save/restore_initial_config() There are several registers which describe how the controller is configured. These registers are sometimes implemented as r/w registers which are configured by firmware and get cleared on controller reset or after suspend/resume cycle. ahci saved and restored those values inside ahci_reset_controller() which is a bit messy and doesn't work over suspend/resume cycle. This patch implements ahci_save/restore_initial_config(). The save function is called during driver initialization and saves cap and port_map to hpriv. The restore function is called after the controller is reset to restore the initial values. Sometimes the initial firmware values are inconsistent and need to be fixed up. This is handled by ahci_save_initial_config(). For this, there are two versions of saved registers. One to write back to the hardware register, the other to use during driver operation. This is necessary to keep ahci's behavior unchanged (write back fixed up port_map while keeping cap as-is). This patch makes ahci save the register values once before the first controller reset, not after it's been reset. Also, the same stored values are used written back after each reset, so the register values are properly recovered after suspend/resume cycle. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-18 21:15:33 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rc)
libata: update libata LLDs to use devres Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 15:00:28 +08:00
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
rc = ahci_reset_controller(host);
if (rc)
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
ahci_init_controller(host);
ahci_print_info(host);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
libata: convert the remaining SATA drivers to new init model Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv, sata_sx4, sata_vsc and sata_inic162x to new init model. Now that host and ap are available during intialization, functions are converted to take either host or ap instead of low level parameters which were inevitable for functions shared between init and other paths. This simplifies code quite a bit. * init_one()'s now follow more consistent init order * ahci_setup_port() and ahci_host_init() collapsed into ahci_init_one() for init order consistency * sata_vsc uses port_info instead of setting fields manually * in sata_svw, k2_board_info converted to port_info (info is now in port flags). port number is honored now. Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 22:44:08 +08:00
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
[libata ahci] support PCI MSI interrupt vector
2005-05-13 03:03:42 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int __init ahci_init(void)
{
[PATCH] libata: replace pci_module_init() with pci_register_driver() Replace pci_module_init() with pci_register_driver(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 17:13:18 +08:00
return pci_register_driver(&ahci_pci_driver);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void __exit ahci_exit(void)
{
pci_unregister_driver(&ahci_pci_driver);
}
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("AHCI SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
libata: release prep (bump versions, etc.) - bump versions where necessary - remove two duplicated+outdated doc comments - add MODULE_VERSION() to AHCI driver
2005-08-23 14:53:51 +08:00
MODULE_VERSION(DRV_VERSION);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_init(ahci_init);
module_exit(ahci_exit);