2015-04-16 17:31:16 +08:00
|
|
|
/*
|
|
|
|
* TI BQ24257 charger driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Intel Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/power_supply.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
|
|
|
|
#define BQ24257_REG_1 0x00
|
|
|
|
#define BQ24257_REG_2 0x01
|
|
|
|
#define BQ24257_REG_3 0x02
|
|
|
|
#define BQ24257_REG_4 0x03
|
|
|
|
#define BQ24257_REG_5 0x04
|
|
|
|
#define BQ24257_REG_6 0x05
|
|
|
|
#define BQ24257_REG_7 0x06
|
|
|
|
|
|
|
|
#define BQ24257_MANUFACTURER "Texas Instruments"
|
|
|
|
#define BQ24257_STAT_IRQ "stat"
|
|
|
|
#define BQ24257_PG_GPIO "pg"
|
|
|
|
|
|
|
|
#define BQ24257_ILIM_SET_DELAY 1000 /* msec */
|
|
|
|
|
|
|
|
enum bq24257_fields {
|
|
|
|
F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT, /* REG 1 */
|
|
|
|
F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE, /* REG 2 */
|
|
|
|
F_VBAT, F_USB_DET, /* REG 3 */
|
|
|
|
F_ICHG, F_ITERM, /* REG 4 */
|
|
|
|
F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
|
|
|
|
F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_STAT, /* REG 6 */
|
|
|
|
F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM, /* REG 7 */
|
|
|
|
|
|
|
|
F_MAX_FIELDS
|
|
|
|
};
|
|
|
|
|
|
|
|
/* initial field values, converted from uV/uA */
|
|
|
|
struct bq24257_init_data {
|
|
|
|
u8 ichg; /* charge current */
|
|
|
|
u8 vbat; /* regulation voltage */
|
|
|
|
u8 iterm; /* termination current */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct bq24257_state {
|
|
|
|
u8 status;
|
|
|
|
u8 fault;
|
|
|
|
bool power_good;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct bq24257_device {
|
|
|
|
struct i2c_client *client;
|
|
|
|
struct device *dev;
|
|
|
|
struct power_supply *charger;
|
|
|
|
|
|
|
|
struct regmap *rmap;
|
|
|
|
struct regmap_field *rmap_fields[F_MAX_FIELDS];
|
|
|
|
|
|
|
|
struct gpio_desc *pg;
|
|
|
|
|
|
|
|
struct delayed_work iilimit_setup_work;
|
|
|
|
|
|
|
|
struct bq24257_init_data init_data;
|
|
|
|
struct bq24257_state state;
|
|
|
|
|
|
|
|
struct mutex lock; /* protect state data */
|
|
|
|
};
|
|
|
|
|
|
|
|
static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case BQ24257_REG_2:
|
|
|
|
case BQ24257_REG_4:
|
|
|
|
return false;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regmap_config bq24257_regmap_config = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
|
|
|
|
|
|
|
.max_register = BQ24257_REG_7,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
|
|
|
|
.volatile_reg = bq24257_is_volatile_reg,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct reg_field bq24257_reg_fields[] = {
|
|
|
|
/* REG 1 */
|
|
|
|
[F_WD_FAULT] = REG_FIELD(BQ24257_REG_1, 7, 7),
|
|
|
|
[F_WD_EN] = REG_FIELD(BQ24257_REG_1, 6, 6),
|
|
|
|
[F_STAT] = REG_FIELD(BQ24257_REG_1, 4, 5),
|
|
|
|
[F_FAULT] = REG_FIELD(BQ24257_REG_1, 0, 3),
|
|
|
|
/* REG 2 */
|
|
|
|
[F_RESET] = REG_FIELD(BQ24257_REG_2, 7, 7),
|
|
|
|
[F_IILIMIT] = REG_FIELD(BQ24257_REG_2, 4, 6),
|
|
|
|
[F_EN_STAT] = REG_FIELD(BQ24257_REG_2, 3, 3),
|
|
|
|
[F_EN_TERM] = REG_FIELD(BQ24257_REG_2, 2, 2),
|
|
|
|
[F_CE] = REG_FIELD(BQ24257_REG_2, 1, 1),
|
|
|
|
[F_HZ_MODE] = REG_FIELD(BQ24257_REG_2, 0, 0),
|
|
|
|
/* REG 3 */
|
|
|
|
[F_VBAT] = REG_FIELD(BQ24257_REG_3, 2, 7),
|
|
|
|
[F_USB_DET] = REG_FIELD(BQ24257_REG_3, 0, 1),
|
|
|
|
/* REG 4 */
|
|
|
|
[F_ICHG] = REG_FIELD(BQ24257_REG_4, 3, 7),
|
|
|
|
[F_ITERM] = REG_FIELD(BQ24257_REG_4, 0, 2),
|
|
|
|
/* REG 5 */
|
|
|
|
[F_LOOP_STATUS] = REG_FIELD(BQ24257_REG_5, 6, 7),
|
|
|
|
[F_LOW_CHG] = REG_FIELD(BQ24257_REG_5, 5, 5),
|
|
|
|
[F_DPDM_EN] = REG_FIELD(BQ24257_REG_5, 4, 4),
|
|
|
|
[F_CE_STATUS] = REG_FIELD(BQ24257_REG_5, 3, 3),
|
|
|
|
[F_VINDPM] = REG_FIELD(BQ24257_REG_5, 0, 2),
|
|
|
|
/* REG 6 */
|
|
|
|
[F_X2_TMR_EN] = REG_FIELD(BQ24257_REG_6, 7, 7),
|
|
|
|
[F_TMR] = REG_FIELD(BQ24257_REG_6, 5, 6),
|
|
|
|
[F_SYSOFF] = REG_FIELD(BQ24257_REG_6, 4, 4),
|
|
|
|
[F_TS_STAT] = REG_FIELD(BQ24257_REG_6, 0, 2),
|
|
|
|
/* REG 7 */
|
|
|
|
[F_VOVP] = REG_FIELD(BQ24257_REG_7, 5, 7),
|
|
|
|
[F_CLR_VDP] = REG_FIELD(BQ24257_REG_7, 4, 4),
|
|
|
|
[F_FORCE_BATDET] = REG_FIELD(BQ24257_REG_7, 3, 3),
|
|
|
|
[F_FORCE_PTM] = REG_FIELD(BQ24257_REG_7, 2, 2)
|
|
|
|
};
|
|
|
|
|
|
|
|
static const u32 bq24257_vbat_map[] = {
|
|
|
|
3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
|
|
|
|
3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
|
|
|
|
3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
|
|
|
|
3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
|
|
|
|
4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
|
|
|
|
4300000, 4320000, 4340000, 4360000, 4380000, 4400000, 4420000, 4440000
|
|
|
|
};
|
|
|
|
|
|
|
|
#define BQ24257_VBAT_MAP_SIZE ARRAY_SIZE(bq24257_vbat_map)
|
|
|
|
|
|
|
|
static const u32 bq24257_ichg_map[] = {
|
|
|
|
500000, 550000, 600000, 650000, 700000, 750000, 800000, 850000, 900000,
|
|
|
|
950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000,
|
|
|
|
1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
|
|
|
|
1750000, 1800000, 1850000, 1900000, 1950000, 2000000
|
|
|
|
};
|
|
|
|
|
|
|
|
#define BQ24257_ICHG_MAP_SIZE ARRAY_SIZE(bq24257_ichg_map)
|
|
|
|
|
|
|
|
static const u32 bq24257_iterm_map[] = {
|
|
|
|
50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000
|
|
|
|
};
|
|
|
|
|
|
|
|
#define BQ24257_ITERM_MAP_SIZE ARRAY_SIZE(bq24257_iterm_map)
|
|
|
|
|
|
|
|
static int bq24257_field_read(struct bq24257_device *bq,
|
|
|
|
enum bq24257_fields field_id)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
int val;
|
|
|
|
|
|
|
|
ret = regmap_field_read(bq->rmap_fields[field_id], &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_field_write(struct bq24257_device *bq,
|
|
|
|
enum bq24257_fields field_id, u8 val)
|
|
|
|
{
|
|
|
|
return regmap_field_write(bq->rmap_fields[field_id], val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 bq24257_find_idx(u32 value, const u32 *map, u8 map_size)
|
|
|
|
{
|
|
|
|
u8 idx;
|
|
|
|
|
|
|
|
for (idx = 1; idx < map_size; idx++)
|
|
|
|
if (value < map[idx])
|
|
|
|
break;
|
|
|
|
|
|
|
|
return idx - 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
enum bq24257_status {
|
|
|
|
STATUS_READY,
|
|
|
|
STATUS_CHARGE_IN_PROGRESS,
|
|
|
|
STATUS_CHARGE_DONE,
|
|
|
|
STATUS_FAULT,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum bq24257_fault {
|
|
|
|
FAULT_NORMAL,
|
|
|
|
FAULT_INPUT_OVP,
|
|
|
|
FAULT_INPUT_UVLO,
|
|
|
|
FAULT_SLEEP,
|
|
|
|
FAULT_BAT_TS,
|
|
|
|
FAULT_BAT_OVP,
|
|
|
|
FAULT_TS,
|
|
|
|
FAULT_TIMER,
|
|
|
|
FAULT_NO_BAT,
|
|
|
|
FAULT_ISET,
|
|
|
|
FAULT_INPUT_LDO_LOW,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int bq24257_power_supply_get_property(struct power_supply *psy,
|
|
|
|
enum power_supply_property psp,
|
|
|
|
union power_supply_propval *val)
|
|
|
|
{
|
|
|
|
struct bq24257_device *bq = power_supply_get_drvdata(psy);
|
|
|
|
struct bq24257_state state;
|
|
|
|
|
|
|
|
mutex_lock(&bq->lock);
|
|
|
|
state = bq->state;
|
|
|
|
mutex_unlock(&bq->lock);
|
|
|
|
|
|
|
|
switch (psp) {
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
|
|
if (!state.power_good)
|
|
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
|
|
else if (state.status == STATUS_READY)
|
|
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
|
|
else if (state.status == STATUS_CHARGE_IN_PROGRESS)
|
|
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
|
|
else if (state.status == STATUS_CHARGE_DONE)
|
|
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
|
|
else
|
|
|
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
|
|
val->strval = BQ24257_MANUFACTURER;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
|
|
val->intval = state.power_good;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
|
|
switch (state.fault) {
|
|
|
|
case FAULT_NORMAL:
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FAULT_INPUT_OVP:
|
|
|
|
case FAULT_BAT_OVP:
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FAULT_TS:
|
|
|
|
case FAULT_BAT_TS:
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FAULT_TIMER:
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
|
|
val->intval = bq24257_ichg_map[bq->init_data.ichg];
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
|
|
val->intval = bq24257_ichg_map[BQ24257_ICHG_MAP_SIZE - 1];
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
|
|
val->intval = bq24257_vbat_map[bq->init_data.vbat];
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
|
|
val->intval = bq24257_vbat_map[BQ24257_VBAT_MAP_SIZE - 1];
|
|
|
|
break;
|
|
|
|
|
|
|
|
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
|
|
|
|
val->intval = bq24257_iterm_map[bq->init_data.iterm];
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_get_chip_state(struct bq24257_device *bq,
|
|
|
|
struct bq24257_state *state)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = bq24257_field_read(bq, F_STAT);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
state->status = ret;
|
|
|
|
|
|
|
|
ret = bq24257_field_read(bq, F_FAULT);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
state->fault = ret;
|
|
|
|
|
|
|
|
state->power_good = !gpiod_get_value_cansleep(bq->pg);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool bq24257_state_changed(struct bq24257_device *bq,
|
|
|
|
struct bq24257_state *new_state)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
mutex_lock(&bq->lock);
|
|
|
|
ret = (bq->state.status != new_state->status ||
|
|
|
|
bq->state.fault != new_state->fault ||
|
|
|
|
bq->state.power_good != new_state->power_good);
|
|
|
|
mutex_unlock(&bq->lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
enum bq24257_loop_status {
|
|
|
|
LOOP_STATUS_NONE,
|
|
|
|
LOOP_STATUS_IN_DPM,
|
|
|
|
LOOP_STATUS_IN_CURRENT_LIMIT,
|
|
|
|
LOOP_STATUS_THERMAL,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum bq24257_in_ilimit {
|
|
|
|
IILIMIT_100,
|
|
|
|
IILIMIT_150,
|
|
|
|
IILIMIT_500,
|
|
|
|
IILIMIT_900,
|
|
|
|
IILIMIT_1500,
|
|
|
|
IILIMIT_2000,
|
|
|
|
IILIMIT_EXT,
|
|
|
|
IILIMIT_NONE,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum bq24257_port_type {
|
|
|
|
PORT_TYPE_DCP, /* Dedicated Charging Port */
|
|
|
|
PORT_TYPE_CDP, /* Charging Downstream Port */
|
|
|
|
PORT_TYPE_SDP, /* Standard Downstream Port */
|
|
|
|
PORT_TYPE_NON_STANDARD,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum bq24257_safety_timer {
|
|
|
|
SAFETY_TIMER_45,
|
|
|
|
SAFETY_TIMER_360,
|
|
|
|
SAFETY_TIMER_540,
|
|
|
|
SAFETY_TIMER_NONE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int bq24257_iilimit_autoset(struct bq24257_device *bq)
|
|
|
|
{
|
|
|
|
int loop_status;
|
|
|
|
int iilimit;
|
|
|
|
int port_type;
|
|
|
|
int ret;
|
|
|
|
const u8 new_iilimit[] = {
|
|
|
|
[PORT_TYPE_DCP] = IILIMIT_2000,
|
|
|
|
[PORT_TYPE_CDP] = IILIMIT_2000,
|
|
|
|
[PORT_TYPE_SDP] = IILIMIT_500,
|
|
|
|
[PORT_TYPE_NON_STANDARD] = IILIMIT_500
|
|
|
|
};
|
|
|
|
|
|
|
|
ret = bq24257_field_read(bq, F_LOOP_STATUS);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
loop_status = ret;
|
|
|
|
|
|
|
|
ret = bq24257_field_read(bq, F_IILIMIT);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
iilimit = ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* All USB ports should be able to handle 500mA. If not, DPM will lower
|
|
|
|
* the charging current to accommodate the power source. No need to set
|
|
|
|
* a lower IILIMIT value.
|
|
|
|
*/
|
|
|
|
if (loop_status == LOOP_STATUS_IN_DPM && iilimit == IILIMIT_500)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ret = bq24257_field_read(bq, F_USB_DET);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
port_type = ret;
|
|
|
|
|
|
|
|
ret = bq24257_field_write(bq, F_IILIMIT, new_iilimit[port_type]);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
ret = bq24257_field_write(bq, F_TMR, SAFETY_TIMER_360);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
ret = bq24257_field_write(bq, F_CLR_VDP, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
dev_dbg(bq->dev, "port/loop = %d/%d -> iilimit = %d\n",
|
|
|
|
port_type, loop_status, new_iilimit[port_type]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error:
|
|
|
|
dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bq24257_iilimit_setup_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct bq24257_device *bq = container_of(work, struct bq24257_device,
|
|
|
|
iilimit_setup_work.work);
|
|
|
|
|
|
|
|
bq24257_iilimit_autoset(bq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bq24257_handle_state_change(struct bq24257_device *bq,
|
|
|
|
struct bq24257_state *new_state)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct bq24257_state old_state;
|
|
|
|
bool reset_iilimit = false;
|
|
|
|
bool config_iilimit = false;
|
|
|
|
|
|
|
|
mutex_lock(&bq->lock);
|
|
|
|
old_state = bq->state;
|
|
|
|
mutex_unlock(&bq->lock);
|
|
|
|
|
|
|
|
if (!new_state->power_good) { /* power removed */
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
|
|
|
|
/* activate D+/D- port detection algorithm */
|
|
|
|
ret = bq24257_field_write(bq, F_DPDM_EN, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
reset_iilimit = true;
|
|
|
|
} else if (!old_state.power_good) { /* power inserted */
|
|
|
|
config_iilimit = true;
|
|
|
|
} else if (new_state->fault == FAULT_NO_BAT) { /* battery removed */
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
|
|
|
|
reset_iilimit = true;
|
|
|
|
} else if (old_state.fault == FAULT_NO_BAT) { /* battery connected */
|
|
|
|
config_iilimit = true;
|
|
|
|
} else if (new_state->fault == FAULT_TIMER) { /* safety timer expired */
|
|
|
|
dev_err(bq->dev, "Safety timer expired! Battery dead?\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (reset_iilimit) {
|
|
|
|
ret = bq24257_field_write(bq, F_IILIMIT, IILIMIT_500);
|
|
|
|
if (ret < 0)
|
|
|
|
goto error;
|
|
|
|
} else if (config_iilimit) {
|
|
|
|
schedule_delayed_work(&bq->iilimit_setup_work,
|
|
|
|
msecs_to_jiffies(BQ24257_ILIM_SET_DELAY));
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
error:
|
|
|
|
dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct bq24257_device *bq = private;
|
|
|
|
struct bq24257_state state;
|
|
|
|
|
|
|
|
ret = bq24257_get_chip_state(bq, &state);
|
|
|
|
if (ret < 0)
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
if (!bq24257_state_changed(bq, &state))
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
|
|
|
|
state.status, state.fault, state.power_good);
|
|
|
|
|
|
|
|
bq24257_handle_state_change(bq, &state);
|
|
|
|
|
|
|
|
mutex_lock(&bq->lock);
|
|
|
|
bq->state = state;
|
|
|
|
mutex_unlock(&bq->lock);
|
|
|
|
|
|
|
|
power_supply_changed(bq->charger);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_hw_init(struct bq24257_device *bq)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
struct bq24257_state state;
|
|
|
|
|
|
|
|
const struct {
|
|
|
|
int field;
|
|
|
|
u32 value;
|
|
|
|
} init_data[] = {
|
|
|
|
{F_ICHG, bq->init_data.ichg},
|
|
|
|
{F_VBAT, bq->init_data.vbat},
|
|
|
|
{F_ITERM, bq->init_data.iterm}
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable the watchdog timer to prevent the IC from going back to
|
|
|
|
* default settings after 50 seconds of I2C inactivity.
|
|
|
|
*/
|
|
|
|
ret = bq24257_field_write(bq, F_WD_EN, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* configure the charge currents and voltages */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(init_data); i++) {
|
|
|
|
ret = bq24257_field_write(bq, init_data[i].field,
|
|
|
|
init_data[i].value);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = bq24257_get_chip_state(bq, &state);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
mutex_lock(&bq->lock);
|
|
|
|
bq->state = state;
|
|
|
|
mutex_unlock(&bq->lock);
|
|
|
|
|
|
|
|
if (!state.power_good)
|
|
|
|
/* activate D+/D- detection algorithm */
|
|
|
|
ret = bq24257_field_write(bq, F_DPDM_EN, 1);
|
|
|
|
else if (state.fault != FAULT_NO_BAT)
|
|
|
|
ret = bq24257_iilimit_autoset(bq);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum power_supply_property bq24257_power_supply_props[] = {
|
|
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
|
|
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
|
|
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
|
|
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
|
|
|
|
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
|
|
|
|
};
|
|
|
|
|
|
|
|
static char *bq24257_charger_supplied_to[] = {
|
|
|
|
"main-battery",
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct power_supply_desc bq24257_power_supply_desc = {
|
|
|
|
.name = "bq24257-charger",
|
|
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
|
|
.properties = bq24257_power_supply_props,
|
|
|
|
.num_properties = ARRAY_SIZE(bq24257_power_supply_props),
|
|
|
|
.get_property = bq24257_power_supply_get_property,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int bq24257_power_supply_init(struct bq24257_device *bq)
|
|
|
|
{
|
|
|
|
struct power_supply_config psy_cfg = { .drv_data = bq, };
|
|
|
|
|
|
|
|
psy_cfg.supplied_to = bq24257_charger_supplied_to;
|
|
|
|
psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to);
|
|
|
|
|
|
|
|
bq->charger = power_supply_register(bq->dev, &bq24257_power_supply_desc,
|
|
|
|
&psy_cfg);
|
|
|
|
if (IS_ERR(bq->charger))
|
|
|
|
return PTR_ERR(bq->charger);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_irq_probe(struct bq24257_device *bq)
|
|
|
|
{
|
|
|
|
struct gpio_desc *stat_irq;
|
|
|
|
|
2015-06-12 16:54:04 +08:00
|
|
|
stat_irq = devm_gpiod_get_index(bq->dev, BQ24257_STAT_IRQ, 0, GPIOD_IN);
|
2015-04-16 17:31:16 +08:00
|
|
|
if (IS_ERR(stat_irq)) {
|
|
|
|
dev_err(bq->dev, "could not probe stat_irq pin\n");
|
|
|
|
return PTR_ERR(stat_irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
return gpiod_to_irq(stat_irq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_pg_gpio_probe(struct bq24257_device *bq)
|
|
|
|
{
|
2015-06-12 16:54:04 +08:00
|
|
|
bq->pg = devm_gpiod_get_index(bq->dev, BQ24257_PG_GPIO, 0, GPIOD_IN);
|
2015-04-16 17:31:16 +08:00
|
|
|
if (IS_ERR(bq->pg)) {
|
|
|
|
dev_err(bq->dev, "could not probe PG pin\n");
|
|
|
|
return PTR_ERR(bq->pg);
|
|
|
|
}
|
|
|
|
|
2015-06-12 16:54:04 +08:00
|
|
|
return 0;
|
2015-04-16 17:31:16 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_fw_probe(struct bq24257_device *bq)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
u32 property;
|
|
|
|
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,charge-current", &property);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
bq->init_data.ichg = bq24257_find_idx(property, bq24257_ichg_map,
|
|
|
|
BQ24257_ICHG_MAP_SIZE);
|
|
|
|
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,battery-regulation-voltage",
|
|
|
|
&property);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
bq->init_data.vbat = bq24257_find_idx(property, bq24257_vbat_map,
|
|
|
|
BQ24257_VBAT_MAP_SIZE);
|
|
|
|
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,termination-current",
|
|
|
|
&property);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map,
|
|
|
|
BQ24257_ITERM_MAP_SIZE);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_probe(struct i2c_client *client,
|
|
|
|
const struct i2c_device_id *id)
|
|
|
|
{
|
|
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
|
|
struct device *dev = &client->dev;
|
|
|
|
struct bq24257_device *bq;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
|
|
dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
|
|
|
|
if (!bq)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
bq->client = client;
|
|
|
|
bq->dev = dev;
|
|
|
|
|
|
|
|
mutex_init(&bq->lock);
|
|
|
|
|
|
|
|
bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
|
|
|
|
if (IS_ERR(bq->rmap)) {
|
|
|
|
dev_err(dev, "failed to allocate register map\n");
|
|
|
|
return PTR_ERR(bq->rmap);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bq24257_reg_fields); i++) {
|
|
|
|
const struct reg_field *reg_fields = bq24257_reg_fields;
|
|
|
|
|
|
|
|
bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
|
|
|
|
reg_fields[i]);
|
|
|
|
if (IS_ERR(bq->rmap_fields[i])) {
|
|
|
|
dev_err(dev, "cannot allocate regmap field\n");
|
|
|
|
return PTR_ERR(bq->rmap_fields[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
i2c_set_clientdata(client, bq);
|
|
|
|
|
|
|
|
INIT_DELAYED_WORK(&bq->iilimit_setup_work, bq24257_iilimit_setup_work);
|
|
|
|
|
|
|
|
if (!dev->platform_data) {
|
|
|
|
ret = bq24257_fw_probe(bq);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "Cannot read device properties.\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* we can only check Power Good status by probing the PG pin */
|
|
|
|
ret = bq24257_pg_gpio_probe(bq);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* reset all registers to defaults */
|
|
|
|
ret = bq24257_field_write(bq, F_RESET, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Put the RESET bit back to 0, in cache. For some reason the HW always
|
|
|
|
* returns 1 on this bit, so this is the only way to avoid resetting the
|
|
|
|
* chip every time we update another field in this register.
|
|
|
|
*/
|
|
|
|
ret = bq24257_field_write(bq, F_RESET, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = bq24257_hw_init(bq);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "Cannot initialize the chip.\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (client->irq <= 0)
|
|
|
|
client->irq = bq24257_irq_probe(bq);
|
|
|
|
|
|
|
|
if (client->irq < 0) {
|
|
|
|
dev_err(dev, "no irq resource found\n");
|
|
|
|
return client->irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
|
|
bq24257_irq_handler_thread,
|
|
|
|
IRQF_TRIGGER_FALLING |
|
|
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
|
|
BQ24257_STAT_IRQ, bq);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = bq24257_power_supply_init(bq);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(dev, "Failed to register power supply\n");
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_remove(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct bq24257_device *bq = i2c_get_clientdata(client);
|
|
|
|
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
|
|
|
|
power_supply_unregister(bq->charger);
|
|
|
|
|
|
|
|
bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int bq24257_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct bq24257_device *bq = dev_get_drvdata(dev);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
|
|
|
|
/* reset all registers to default (and activate standalone mode) */
|
|
|
|
ret = bq24257_field_write(bq, F_RESET, 1);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bq24257_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct bq24257_device *bq = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = bq24257_field_write(bq, F_RESET, 0);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = bq24257_hw_init(bq);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(bq->dev, "Cannot init chip after resume.\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* signal userspace, maybe state changed while suspended */
|
|
|
|
power_supply_changed(bq->charger);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static const struct dev_pm_ops bq24257_pm = {
|
|
|
|
SET_SYSTEM_SLEEP_PM_OPS(bq24257_suspend, bq24257_resume)
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct i2c_device_id bq24257_i2c_ids[] = {
|
|
|
|
{ "bq24257", 0 },
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
|
|
|
|
|
|
|
|
static const struct of_device_id bq24257_of_match[] = {
|
|
|
|
{ .compatible = "ti,bq24257", },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, bq24257_of_match);
|
|
|
|
|
|
|
|
static const struct acpi_device_id bq24257_acpi_match[] = {
|
|
|
|
{"BQ242570", 0},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
|
|
|
|
|
|
|
|
static struct i2c_driver bq24257_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "bq24257-charger",
|
|
|
|
.of_match_table = of_match_ptr(bq24257_of_match),
|
|
|
|
.acpi_match_table = ACPI_PTR(bq24257_acpi_match),
|
|
|
|
.pm = &bq24257_pm,
|
|
|
|
},
|
|
|
|
.probe = bq24257_probe,
|
|
|
|
.remove = bq24257_remove,
|
|
|
|
.id_table = bq24257_i2c_ids,
|
|
|
|
};
|
|
|
|
module_i2c_driver(bq24257_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
|
|
|
|
MODULE_DESCRIPTION("bq24257 charger driver");
|
|
|
|
MODULE_LICENSE("GPL");
|