OpenCloudOS-Kernel/drivers/scsi/megaraid/megaraid_sas_fusion.c

5047 lines
146 KiB
C
Raw Normal View History

/*
* Linux MegaRAID driver for SAS based RAID controllers
*
* Copyright (c) 2009-2013 LSI Corporation
* Copyright (c) 2013-2016 Avago Technologies
* Copyright (c) 2016-2018 Broadcom Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas_fusion.c
*
* Authors: Broadcom Inc.
* Sumant Patro
* Adam Radford
* Kashyap Desai <kashyap.desai@broadcom.com>
* Sumit Saxena <sumit.saxena@broadcom.com>
*
* Send feedback to: megaraidlinux.pdl@broadcom.com
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/moduleparam.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/uio.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <linux/compat.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/vmalloc.h>
#include <linux/workqueue.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_dbg.h>
#include <linux/dmi.h>
#include "megaraid_sas_fusion.h"
#include "megaraid_sas.h"
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
extern void megasas_free_cmds(struct megasas_instance *instance);
extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance
*instance);
extern void
megasas_complete_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd, u8 alt_status);
int
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
int seconds);
void
megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd);
int megasas_alloc_cmds(struct megasas_instance *instance);
int
megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs);
int
megasas_issue_polled(struct megasas_instance *instance,
struct megasas_cmd *cmd);
void
megasas_check_and_restore_queue_depth(struct megasas_instance *instance);
int megasas_transition_to_ready(struct megasas_instance *instance, int ocr);
void megaraid_sas_kill_hba(struct megasas_instance *instance);
extern u32 megasas_dbg_lvl;
int megasas_sriov_start_heartbeat(struct megasas_instance *instance,
int initial);
void megasas_start_timer(struct megasas_instance *instance);
extern struct megasas_mgmt_info megasas_mgmt_info;
extern unsigned int resetwaittime;
extern unsigned int dual_qdepth_disable;
static void megasas_free_rdpq_fusion(struct megasas_instance *instance);
static void megasas_free_reply_fusion(struct megasas_instance *instance);
static inline
void megasas_configure_queue_sizes(struct megasas_instance *instance);
static void megasas_fusion_crash_dump(struct megasas_instance *instance);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
/**
* megasas_check_same_4gb_region - check if allocation
* crosses same 4GB boundary or not
* @instance - adapter's soft instance
* start_addr - start address of DMA allocation
* size - size of allocation in bytes
* return - true : allocation does not cross same
* 4GB boundary
* false: allocation crosses same
* 4GB boundary
*/
static inline bool megasas_check_same_4gb_region
(struct megasas_instance *instance, dma_addr_t start_addr, size_t size)
{
dma_addr_t end_addr;
end_addr = start_addr + size;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (upper_32_bits(start_addr) != upper_32_bits(end_addr)) {
dev_err(&instance->pdev->dev,
"Failed to get same 4GB boundary: start_addr: 0x%llx end_addr: 0x%llx\n",
(unsigned long long)start_addr,
(unsigned long long)end_addr);
return false;
}
return true;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/**
* megasas_enable_intr_fusion - Enables interrupts
* @regs: MFI register set
*/
void
megasas_enable_intr_fusion(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
instance->mask_interrupts = 0;
/* For Thunderbolt/Invader also clear intr on enable */
writel(~0, &regs->outbound_intr_status);
readl(&regs->outbound_intr_status);
writel(~MFI_FUSION_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_fusion - Disables interrupt
* @regs: MFI register set
*/
void
megasas_disable_intr_fusion(struct megasas_instance *instance)
{
u32 mask = 0xFFFFFFFF;
u32 status;
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
instance->mask_interrupts = 1;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
status = readl(&regs->outbound_intr_mask);
}
int
megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs)
{
u32 status;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (status & 1) {
writel(status, &regs->outbound_intr_status);
readl(&regs->outbound_intr_status);
return 1;
}
if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
return 0;
return 1;
}
/**
* megasas_get_cmd_fusion - Get a command from the free pool
* @instance: Adapter soft state
*
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
* Returns a blk_tag indexed mpt frame
*/
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
inline struct megasas_cmd_fusion *megasas_get_cmd_fusion(struct megasas_instance
*instance, u32 blk_tag)
{
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
struct fusion_context *fusion;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
fusion = instance->ctrl_context;
return fusion->cmd_list[blk_tag];
}
/**
* megasas_return_cmd_fusion - Return a cmd to free command pool
* @instance: Adapter soft state
* @cmd: Command packet to be returned to free command pool
*/
inline void megasas_return_cmd_fusion(struct megasas_instance *instance,
struct megasas_cmd_fusion *cmd)
{
cmd->scmd = NULL;
memset(cmd->io_request, 0, MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE);
cmd->r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
cmd->cmd_completed = false;
}
/**
* megasas_fire_cmd_fusion - Sends command to the FW
* @instance: Adapter soft state
* @req_desc: 64bit Request descriptor
*
* Perform PCI Write.
*/
static void
megasas_fire_cmd_fusion(struct megasas_instance *instance,
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
{
#if defined(writeq) && defined(CONFIG_64BIT)
u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) |
le32_to_cpu(req_desc->u.low));
writeq(req_data, &instance->reg_set->inbound_low_queue_port);
#else
unsigned long flags;
spin_lock_irqsave(&instance->hba_lock, flags);
writel(le32_to_cpu(req_desc->u.low),
&instance->reg_set->inbound_low_queue_port);
writel(le32_to_cpu(req_desc->u.high),
&instance->reg_set->inbound_high_queue_port);
mmiowb();
spin_unlock_irqrestore(&instance->hba_lock, flags);
#endif
}
/**
* megasas_fusion_update_can_queue - Do all Adapter Queue depth related calculations here
* @instance: Adapter soft state
* fw_boot_context: Whether this function called during probe or after OCR
*
* This function is only for fusion controllers.
* Update host can queue, if firmware downgrade max supported firmware commands.
* Firmware upgrade case will be skiped because underlying firmware has
* more resource than exposed to the OS.
*
*/
static void
megasas_fusion_update_can_queue(struct megasas_instance *instance, int fw_boot_context)
{
u16 cur_max_fw_cmds = 0;
u16 ldio_threshold = 0;
struct megasas_register_set __iomem *reg_set;
reg_set = instance->reg_set;
/* ventura FW does not fill outbound_scratch_pad_3 with queue depth */
if (instance->adapter_type < VENTURA_SERIES)
cur_max_fw_cmds =
readl(&instance->reg_set->outbound_scratch_pad_3) & 0x00FFFF;
if (dual_qdepth_disable || !cur_max_fw_cmds)
cur_max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
else
ldio_threshold =
(instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF) - MEGASAS_FUSION_IOCTL_CMDS;
dev_info(&instance->pdev->dev,
"Current firmware supports maximum commands: %d\t LDIO threshold: %d\n",
cur_max_fw_cmds, ldio_threshold);
if (fw_boot_context == OCR_CONTEXT) {
cur_max_fw_cmds = cur_max_fw_cmds - 1;
if (cur_max_fw_cmds < instance->max_fw_cmds) {
instance->cur_can_queue =
cur_max_fw_cmds - (MEGASAS_FUSION_INTERNAL_CMDS +
MEGASAS_FUSION_IOCTL_CMDS);
instance->host->can_queue = instance->cur_can_queue;
instance->ldio_threshold = ldio_threshold;
}
} else {
instance->max_fw_cmds = cur_max_fw_cmds;
instance->ldio_threshold = ldio_threshold;
if (reset_devices)
instance->max_fw_cmds = min(instance->max_fw_cmds,
(u16)MEGASAS_KDUMP_QUEUE_DEPTH);
/*
* Reduce the max supported cmds by 1. This is to ensure that the
* reply_q_sz (1 more than the max cmd that driver may send)
* does not exceed max cmds that the FW can support
*/
instance->max_fw_cmds = instance->max_fw_cmds-1;
}
}
/**
* megasas_free_cmds_fusion - Free all the cmds in the free cmd pool
* @instance: Adapter soft state
*/
void
megasas_free_cmds_fusion(struct megasas_instance *instance)
{
int i;
struct fusion_context *fusion = instance->ctrl_context;
struct megasas_cmd_fusion *cmd;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (fusion->sense)
dma_pool_free(fusion->sense_dma_pool, fusion->sense,
fusion->sense_phys_addr);
/* SG */
if (fusion->cmd_list) {
for (i = 0; i < instance->max_mpt_cmds; i++) {
cmd = fusion->cmd_list[i];
if (cmd) {
if (cmd->sg_frame)
dma_pool_free(fusion->sg_dma_pool,
cmd->sg_frame,
cmd->sg_frame_phys_addr);
}
kfree(cmd);
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
kfree(fusion->cmd_list);
}
if (fusion->sg_dma_pool) {
dma_pool_destroy(fusion->sg_dma_pool);
fusion->sg_dma_pool = NULL;
}
if (fusion->sense_dma_pool) {
dma_pool_destroy(fusion->sense_dma_pool);
fusion->sense_dma_pool = NULL;
}
/* Reply Frame, Desc*/
if (instance->is_rdpq)
megasas_free_rdpq_fusion(instance);
else
megasas_free_reply_fusion(instance);
/* Request Frame, Desc*/
if (fusion->req_frames_desc)
dma_free_coherent(&instance->pdev->dev,
fusion->request_alloc_sz, fusion->req_frames_desc,
fusion->req_frames_desc_phys);
if (fusion->io_request_frames)
dma_pool_free(fusion->io_request_frames_pool,
fusion->io_request_frames,
fusion->io_request_frames_phys);
if (fusion->io_request_frames_pool) {
dma_pool_destroy(fusion->io_request_frames_pool);
fusion->io_request_frames_pool = NULL;
}
}
/**
* megasas_create_sg_sense_fusion - Creates DMA pool for cmd frames
* @instance: Adapter soft state
*
*/
static int megasas_create_sg_sense_fusion(struct megasas_instance *instance)
{
int i;
u16 max_cmd;
struct fusion_context *fusion;
struct megasas_cmd_fusion *cmd;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
int sense_sz;
u32 offset;
fusion = instance->ctrl_context;
max_cmd = instance->max_fw_cmds;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
sense_sz = instance->max_mpt_cmds * SCSI_SENSE_BUFFERSIZE;
fusion->sg_dma_pool =
dma_pool_create("mr_sg", &instance->pdev->dev,
instance->max_chain_frame_sz,
MR_DEFAULT_NVME_PAGE_SIZE, 0);
/* SCSI_SENSE_BUFFERSIZE = 96 bytes */
fusion->sense_dma_pool =
dma_pool_create("mr_sense", &instance->pdev->dev,
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
sense_sz, 64, 0);
if (!fusion->sense_dma_pool || !fusion->sg_dma_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
fusion->sense = dma_pool_alloc(fusion->sense_dma_pool,
GFP_KERNEL, &fusion->sense_phys_addr);
if (!fusion->sense) {
dev_err(&instance->pdev->dev,
"failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
/* sense buffer, request frame and reply desc pool requires to be in
* same 4 gb region. Below function will check this.
* In case of failure, new pci pool will be created with updated
* alignment.
* Older allocation and pool will be destroyed.
* Alignment will be used such a way that next allocation if success,
* will always meet same 4gb region requirement.
* Actual requirement is not alignment, but we need start and end of
* DMA address must have same upper 32 bit address.
*/
if (!megasas_check_same_4gb_region(instance, fusion->sense_phys_addr,
sense_sz)) {
dma_pool_free(fusion->sense_dma_pool, fusion->sense,
fusion->sense_phys_addr);
fusion->sense = NULL;
dma_pool_destroy(fusion->sense_dma_pool);
fusion->sense_dma_pool =
dma_pool_create("mr_sense_align", &instance->pdev->dev,
sense_sz, roundup_pow_of_two(sense_sz),
0);
if (!fusion->sense_dma_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
fusion->sense = dma_pool_alloc(fusion->sense_dma_pool,
GFP_KERNEL,
&fusion->sense_phys_addr);
if (!fusion->sense) {
dev_err(&instance->pdev->dev,
"failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
/*
* Allocate and attach a frame to each of the commands in cmd_list
*/
for (i = 0; i < max_cmd; i++) {
cmd = fusion->cmd_list[i];
cmd->sg_frame = dma_pool_alloc(fusion->sg_dma_pool,
GFP_KERNEL, &cmd->sg_frame_phys_addr);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
offset = SCSI_SENSE_BUFFERSIZE * i;
cmd->sense = (u8 *)fusion->sense + offset;
cmd->sense_phys_addr = fusion->sense_phys_addr + offset;
if (!cmd->sg_frame) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
/* create sense buffer for the raid 1/10 fp */
for (i = max_cmd; i < instance->max_mpt_cmds; i++) {
cmd = fusion->cmd_list[i];
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
offset = SCSI_SENSE_BUFFERSIZE * i;
cmd->sense = (u8 *)fusion->sense + offset;
cmd->sense_phys_addr = fusion->sense_phys_addr + offset;
}
return 0;
}
int
megasas_alloc_cmdlist_fusion(struct megasas_instance *instance)
{
scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion Found this issue by kmemleak, a few kb mem was leaked in megasas_alloc_cmdlist_fusion when kzalloc failed for one megasas_cmd_fusion allocation. unreferenced object 0xffff88045dbd2000 (size 8192): comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s) backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff812186a8>] __kmalloc+0xe8/0x220 [<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x34 0xd5c4 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:443). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 unreferenced object 0xffff880454ce3600 (size 192): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x77 0xd607 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:450). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 Signed-off-by: Shu Wang <shuwang@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-21 18:54:09 +08:00
u32 max_mpt_cmd, i, j;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
max_mpt_cmd = instance->max_mpt_cmds;
/*
* fusion->cmd_list is an array of struct megasas_cmd_fusion pointers.
* Allocate the dynamic array first and then allocate individual
* commands.
*/
fusion->cmd_list =
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
kcalloc(max_mpt_cmd, sizeof(struct megasas_cmd_fusion *),
GFP_KERNEL);
if (!fusion->cmd_list) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
for (i = 0; i < max_mpt_cmd; i++) {
fusion->cmd_list[i] = kzalloc(sizeof(struct megasas_cmd_fusion),
GFP_KERNEL);
if (!fusion->cmd_list[i]) {
scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion Found this issue by kmemleak, a few kb mem was leaked in megasas_alloc_cmdlist_fusion when kzalloc failed for one megasas_cmd_fusion allocation. unreferenced object 0xffff88045dbd2000 (size 8192): comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s) backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff812186a8>] __kmalloc+0xe8/0x220 [<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x34 0xd5c4 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:443). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 unreferenced object 0xffff880454ce3600 (size 192): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x77 0xd607 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:450). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 Signed-off-by: Shu Wang <shuwang@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-21 18:54:09 +08:00
for (j = 0; j < i; j++)
kfree(fusion->cmd_list[j]);
kfree(fusion->cmd_list);
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion Found this issue by kmemleak, a few kb mem was leaked in megasas_alloc_cmdlist_fusion when kzalloc failed for one megasas_cmd_fusion allocation. unreferenced object 0xffff88045dbd2000 (size 8192): comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s) backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff812186a8>] __kmalloc+0xe8/0x220 [<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x34 0xd5c4 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:443). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 unreferenced object 0xffff880454ce3600 (size 192): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x77 0xd607 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:450). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 Signed-off-by: Shu Wang <shuwang@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-21 18:54:09 +08:00
return 0;
}
int
megasas_alloc_request_fusion(struct megasas_instance *instance)
{
struct fusion_context *fusion;
fusion = instance->ctrl_context;
retry_alloc:
fusion->io_request_frames_pool =
dma_pool_create("mr_ioreq", &instance->pdev->dev,
fusion->io_frames_alloc_sz, 16, 0);
if (!fusion->io_request_frames_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
fusion->io_request_frames =
dma_pool_alloc(fusion->io_request_frames_pool,
GFP_KERNEL, &fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
if (instance->max_fw_cmds >= (MEGASAS_REDUCE_QD_COUNT * 2)) {
instance->max_fw_cmds -= MEGASAS_REDUCE_QD_COUNT;
dma_pool_destroy(fusion->io_request_frames_pool);
megasas_configure_queue_sizes(instance);
goto retry_alloc;
} else {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (!megasas_check_same_4gb_region(instance,
fusion->io_request_frames_phys,
fusion->io_frames_alloc_sz)) {
dma_pool_free(fusion->io_request_frames_pool,
fusion->io_request_frames,
fusion->io_request_frames_phys);
fusion->io_request_frames = NULL;
dma_pool_destroy(fusion->io_request_frames_pool);
fusion->io_request_frames_pool =
dma_pool_create("mr_ioreq_align",
&instance->pdev->dev,
fusion->io_frames_alloc_sz,
roundup_pow_of_two(fusion->io_frames_alloc_sz),
0);
if (!fusion->io_request_frames_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
fusion->io_request_frames =
dma_pool_alloc(fusion->io_request_frames_pool,
GFP_KERNEL,
&fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
fusion->req_frames_desc =
dma_alloc_coherent(&instance->pdev->dev,
fusion->request_alloc_sz,
&fusion->req_frames_desc_phys, GFP_KERNEL);
if (!fusion->req_frames_desc) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
return 0;
}
int
megasas_alloc_reply_fusion(struct megasas_instance *instance)
{
int i, count;
struct fusion_context *fusion;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
fusion = instance->ctrl_context;
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
fusion->reply_frames_desc_pool =
dma_pool_create("mr_reply", &instance->pdev->dev,
fusion->reply_alloc_sz * count, 16, 0);
if (!fusion->reply_frames_desc_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
fusion->reply_frames_desc[0] =
dma_pool_alloc(fusion->reply_frames_desc_pool,
GFP_KERNEL, &fusion->reply_frames_desc_phys[0]);
if (!fusion->reply_frames_desc[0]) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (!megasas_check_same_4gb_region(instance,
fusion->reply_frames_desc_phys[0],
(fusion->reply_alloc_sz * count))) {
dma_pool_free(fusion->reply_frames_desc_pool,
fusion->reply_frames_desc[0],
fusion->reply_frames_desc_phys[0]);
fusion->reply_frames_desc[0] = NULL;
dma_pool_destroy(fusion->reply_frames_desc_pool);
fusion->reply_frames_desc_pool =
dma_pool_create("mr_reply_align",
&instance->pdev->dev,
fusion->reply_alloc_sz * count,
roundup_pow_of_two(fusion->reply_alloc_sz * count),
0);
if (!fusion->reply_frames_desc_pool) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
fusion->reply_frames_desc[0] =
dma_pool_alloc(fusion->reply_frames_desc_pool,
GFP_KERNEL,
&fusion->reply_frames_desc_phys[0]);
if (!fusion->reply_frames_desc[0]) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
}
reply_desc = fusion->reply_frames_desc[0];
for (i = 0; i < fusion->reply_q_depth * count; i++, reply_desc++)
reply_desc->Words = cpu_to_le64(ULLONG_MAX);
/* This is not a rdpq mode, but driver still populate
* reply_frame_desc array to use same msix index in ISR path.
*/
for (i = 0; i < (count - 1); i++)
fusion->reply_frames_desc[i + 1] =
fusion->reply_frames_desc[i] +
(fusion->reply_alloc_sz)/sizeof(union MPI2_REPLY_DESCRIPTORS_UNION);
return 0;
}
int
megasas_alloc_rdpq_fusion(struct megasas_instance *instance)
{
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
int i, j, k, msix_count;
struct fusion_context *fusion;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
union MPI2_REPLY_DESCRIPTORS_UNION *rdpq_chunk_virt[RDPQ_MAX_CHUNK_COUNT];
dma_addr_t rdpq_chunk_phys[RDPQ_MAX_CHUNK_COUNT];
u8 dma_alloc_count, abs_index;
u32 chunk_size, array_size, offset;
fusion = instance->ctrl_context;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
chunk_size = fusion->reply_alloc_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK;
array_size = sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) *
MAX_MSIX_QUEUES_FUSION;
fusion->rdpq_virt = dma_zalloc_coherent(&instance->pdev->dev,
array_size, &fusion->rdpq_phys, GFP_KERNEL);
if (!fusion->rdpq_virt) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
msix_count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
fusion->reply_frames_desc_pool = dma_pool_create("mr_rdpq",
&instance->pdev->dev,
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
chunk_size, 16, 0);
fusion->reply_frames_desc_pool_align =
dma_pool_create("mr_rdpq_align",
&instance->pdev->dev,
chunk_size,
roundup_pow_of_two(chunk_size),
0);
if (!fusion->reply_frames_desc_pool ||
!fusion->reply_frames_desc_pool_align) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
/*
* For INVADER_SERIES each set of 8 reply queues(0-7, 8-15, ..) and
* VENTURA_SERIES each set of 16 reply queues(0-15, 16-31, ..) should be
* within 4GB boundary and also reply queues in a set must have same
* upper 32-bits in their memory address. so here driver is allocating the
* DMA'able memory for reply queues according. Driver uses limitation of
* VENTURA_SERIES to manage INVADER_SERIES as well.
*/
dma_alloc_count = DIV_ROUND_UP(msix_count, RDPQ_MAX_INDEX_IN_ONE_CHUNK);
for (i = 0; i < dma_alloc_count; i++) {
rdpq_chunk_virt[i] =
dma_pool_alloc(fusion->reply_frames_desc_pool,
GFP_KERNEL, &rdpq_chunk_phys[i]);
if (!rdpq_chunk_virt[i]) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n", __func__, __LINE__);
return -ENOMEM;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
/* reply desc pool requires to be in same 4 gb region.
* Below function will check this.
* In case of failure, new pci pool will be created with updated
* alignment.
* For RDPQ buffers, driver always allocate two separate pci pool.
* Alignment will be used such a way that next allocation if
* success, will always meet same 4gb region requirement.
* rdpq_tracker keep track of each buffer's physical,
* virtual address and pci pool descriptor. It will help driver
* while freeing the resources.
*
*/
if (!megasas_check_same_4gb_region(instance, rdpq_chunk_phys[i],
chunk_size)) {
dma_pool_free(fusion->reply_frames_desc_pool,
rdpq_chunk_virt[i],
rdpq_chunk_phys[i]);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
rdpq_chunk_virt[i] =
dma_pool_alloc(fusion->reply_frames_desc_pool_align,
GFP_KERNEL, &rdpq_chunk_phys[i]);
if (!rdpq_chunk_virt[i]) {
dev_err(&instance->pdev->dev,
"Failed from %s %d\n",
__func__, __LINE__);
return -ENOMEM;
}
fusion->rdpq_tracker[i].dma_pool_ptr =
fusion->reply_frames_desc_pool_align;
} else {
fusion->rdpq_tracker[i].dma_pool_ptr =
fusion->reply_frames_desc_pool;
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
fusion->rdpq_tracker[i].pool_entry_phys = rdpq_chunk_phys[i];
fusion->rdpq_tracker[i].pool_entry_virt = rdpq_chunk_virt[i];
}
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
for (k = 0; k < dma_alloc_count; k++) {
for (i = 0; i < RDPQ_MAX_INDEX_IN_ONE_CHUNK; i++) {
abs_index = (k * RDPQ_MAX_INDEX_IN_ONE_CHUNK) + i;
if (abs_index == msix_count)
break;
offset = fusion->reply_alloc_sz * i;
fusion->rdpq_virt[abs_index].RDPQBaseAddress =
cpu_to_le64(rdpq_chunk_phys[k] + offset);
fusion->reply_frames_desc_phys[abs_index] =
rdpq_chunk_phys[k] + offset;
fusion->reply_frames_desc[abs_index] =
(union MPI2_REPLY_DESCRIPTORS_UNION *)((u8 *)rdpq_chunk_virt[k] + offset);
reply_desc = fusion->reply_frames_desc[abs_index];
for (j = 0; j < fusion->reply_q_depth; j++, reply_desc++)
reply_desc->Words = ULLONG_MAX;
}
}
return 0;
}
static void
megasas_free_rdpq_fusion(struct megasas_instance *instance) {
int i;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
for (i = 0; i < RDPQ_MAX_CHUNK_COUNT; i++) {
if (fusion->rdpq_tracker[i].pool_entry_virt)
dma_pool_free(fusion->rdpq_tracker[i].dma_pool_ptr,
fusion->rdpq_tracker[i].pool_entry_virt,
fusion->rdpq_tracker[i].pool_entry_phys);
}
if (fusion->reply_frames_desc_pool)
dma_pool_destroy(fusion->reply_frames_desc_pool);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (fusion->reply_frames_desc_pool_align)
dma_pool_destroy(fusion->reply_frames_desc_pool_align);
if (fusion->rdpq_virt)
dma_free_coherent(&instance->pdev->dev,
sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) * MAX_MSIX_QUEUES_FUSION,
fusion->rdpq_virt, fusion->rdpq_phys);
}
static void
megasas_free_reply_fusion(struct megasas_instance *instance) {
struct fusion_context *fusion;
fusion = instance->ctrl_context;
if (fusion->reply_frames_desc[0])
dma_pool_free(fusion->reply_frames_desc_pool,
fusion->reply_frames_desc[0],
fusion->reply_frames_desc_phys[0]);
if (fusion->reply_frames_desc_pool)
dma_pool_destroy(fusion->reply_frames_desc_pool);
}
/**
* megasas_alloc_cmds_fusion - Allocates the command packets
* @instance: Adapter soft state
*
*
* Each frame has a 32-bit field called context. This context is used to get
* back the megasas_cmd_fusion from the frame when a frame gets completed
* In this driver, the 32 bit values are the indices into an array cmd_list.
* This array is used only to look up the megasas_cmd_fusion given the context.
* The free commands themselves are maintained in a linked list called cmd_pool.
*
* cmds are formed in the io_request and sg_frame members of the
* megasas_cmd_fusion. The context field is used to get a request descriptor
* and is used as SMID of the cmd.
* SMID value range is from 1 to max_fw_cmds.
*/
int
megasas_alloc_cmds_fusion(struct megasas_instance *instance)
{
int i;
struct fusion_context *fusion;
struct megasas_cmd_fusion *cmd;
u32 offset;
dma_addr_t io_req_base_phys;
u8 *io_req_base;
fusion = instance->ctrl_context;
if (megasas_alloc_request_fusion(instance))
goto fail_exit;
if (instance->is_rdpq) {
if (megasas_alloc_rdpq_fusion(instance))
goto fail_exit;
} else
if (megasas_alloc_reply_fusion(instance))
goto fail_exit;
if (megasas_alloc_cmdlist_fusion(instance))
goto fail_exit;
dev_info(&instance->pdev->dev, "Configured max firmware commands: %d\n",
instance->max_fw_cmds);
/* The first 256 bytes (SMID 0) is not used. Don't add to the cmd list */
io_req_base = fusion->io_request_frames + MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
io_req_base_phys = fusion->io_request_frames_phys + MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
/*
* Add all the commands to command pool (fusion->cmd_pool)
*/
/* SMID 0 is reserved. Set SMID/index from 1 */
for (i = 0; i < instance->max_mpt_cmds; i++) {
cmd = fusion->cmd_list[i];
offset = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i;
memset(cmd, 0, sizeof(struct megasas_cmd_fusion));
cmd->index = i + 1;
cmd->scmd = NULL;
cmd->sync_cmd_idx =
(i >= instance->max_scsi_cmds && i < instance->max_fw_cmds) ?
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
(i - instance->max_scsi_cmds) :
(u32)ULONG_MAX; /* Set to Invalid */
cmd->instance = instance;
cmd->io_request =
(struct MPI2_RAID_SCSI_IO_REQUEST *)
(io_req_base + offset);
memset(cmd->io_request, 0,
sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
cmd->io_request_phys_addr = io_req_base_phys + offset;
cmd->r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
}
if (megasas_create_sg_sense_fusion(instance))
goto fail_exit;
return 0;
fail_exit:
megasas_free_cmds_fusion(instance);
return -ENOMEM;
}
/**
* wait_and_poll - Issues a polling command
* @instance: Adapter soft state
* @cmd: Command packet to be issued
*
* For polling, MFI requires the cmd_status to be set to 0xFF before posting.
*/
int
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
int seconds)
{
int i;
struct megasas_header *frame_hdr = &cmd->frame->hdr;
struct fusion_context *fusion;
u32 msecs = seconds * 1000;
fusion = instance->ctrl_context;
/*
* Wait for cmd_status to change
*/
for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i += 20) {
rmb();
msleep(20);
}
if (frame_hdr->cmd_status == MFI_STAT_INVALID_STATUS)
return DCMD_TIMEOUT;
else if (frame_hdr->cmd_status == MFI_STAT_OK)
return DCMD_SUCCESS;
else
return DCMD_FAILED;
}
/**
* megasas_ioc_init_fusion - Initializes the FW
* @instance: Adapter soft state
*
* Issues the IOC Init cmd
*/
int
megasas_ioc_init_fusion(struct megasas_instance *instance)
{
struct megasas_init_frame *init_frame;
struct MPI2_IOC_INIT_REQUEST *IOCInitMessage = NULL;
dma_addr_t ioc_init_handle;
struct megasas_cmd *cmd;
u8 ret, cur_rdpq_mode;
struct fusion_context *fusion;
union MEGASAS_REQUEST_DESCRIPTOR_UNION req_desc;
int i;
struct megasas_header *frame_hdr;
const char *sys_info;
MFI_CAPABILITIES *drv_ops;
u32 scratch_pad_2;
ktime_t time;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
bool cur_fw_64bit_dma_capable;
fusion = instance->ctrl_context;
ioc_init_handle = fusion->ioc_init_request_phys;
IOCInitMessage = fusion->ioc_init_request;
cmd = fusion->ioc_init_cmd;
scratch_pad_2 = readl
(&instance->reg_set->outbound_scratch_pad_2);
cur_rdpq_mode = (scratch_pad_2 & MR_RDPQ_MODE_OFFSET) ? 1 : 0;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (instance->adapter_type == INVADER_SERIES) {
cur_fw_64bit_dma_capable =
(scratch_pad_2 & MR_CAN_HANDLE_64_BIT_DMA_OFFSET) ? true : false;
if (instance->consistent_mask_64bit && !cur_fw_64bit_dma_capable) {
dev_err(&instance->pdev->dev, "Driver was operating on 64bit "
"DMA mask, but upcoming FW does not support 64bit DMA mask\n");
megaraid_sas_kill_hba(instance);
ret = 1;
goto fail_fw_init;
}
}
if (instance->is_rdpq && !cur_rdpq_mode) {
dev_err(&instance->pdev->dev, "Firmware downgrade *NOT SUPPORTED*"
" from RDPQ mode to non RDPQ mode\n");
ret = 1;
goto fail_fw_init;
}
scsi: megaraid_sas: Send SYNCHRONIZE_CACHE for VD to firmware Until now the megaraid_sas driver has reported successful completion on SYNCHRONIZE_CACHE commands without sending them down to the controller. The controller firmware has been responsible for taking care of flushing disk caches for all drives that belong to a Virtual Disk at the time of system reboot/shutdown. There may have been a reason to avoid sending SYNCHRONIZE_CACHE to a VD in the past but that no longer appears to be valid. Older versions of MegaRaid firmware (Gen2 and Gen2.5) set the WCE bit for Virtual Disks but the firmware does not report correct completion status for a SYNCHRONIZE_CACHE command. As a result, we must use another method to identify whether it is safe to send the command to the controller. We use the canHandleSyncCache firmware flag in the scratch pad register at offset 0xB4. New SYNCHRONIZE_CACHE behavior: IF 'JBOD' Driver sends SYNCHRONIZE_CACHE command to the firmware Firmware sends SYNCHRONIZE_CACHE to drive Firmware obtains status from drive and returns same status back to driver ELSEIF 'VirtualDisk' IF firmware supports new API bit called canHandleSyncCache Driver sends SYNCHRONIZE_CACHE command to the firmware Firmware does not send SYNCHRONIZE_CACHE to drives Firmware returns SUCCESS ELSE Driver does not send SYNCHRONIZE_CACHE command to the firmware Driver return SUCCESS for that command ENDIF ENDIF [mkp: edited patch description] Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-21 21:33:33 +08:00
instance->fw_sync_cache_support = (scratch_pad_2 &
MR_CAN_HANDLE_SYNC_CACHE_OFFSET) ? 1 : 0;
dev_info(&instance->pdev->dev, "FW supports sync cache\t: %s\n",
instance->fw_sync_cache_support ? "Yes" : "No");
memset(IOCInitMessage, 0, sizeof(struct MPI2_IOC_INIT_REQUEST));
IOCInitMessage->Function = MPI2_FUNCTION_IOC_INIT;
IOCInitMessage->WhoInit = MPI2_WHOINIT_HOST_DRIVER;
IOCInitMessage->MsgVersion = cpu_to_le16(MPI2_VERSION);
IOCInitMessage->HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
IOCInitMessage->SystemRequestFrameSize = cpu_to_le16(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4);
IOCInitMessage->ReplyDescriptorPostQueueDepth = cpu_to_le16(fusion->reply_q_depth);
IOCInitMessage->ReplyDescriptorPostQueueAddress = instance->is_rdpq ?
cpu_to_le64(fusion->rdpq_phys) :
cpu_to_le64(fusion->reply_frames_desc_phys[0]);
IOCInitMessage->MsgFlags = instance->is_rdpq ?
MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE : 0;
IOCInitMessage->SystemRequestFrameBaseAddress = cpu_to_le64(fusion->io_request_frames_phys);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
IOCInitMessage->SenseBufferAddressHigh = cpu_to_le32(upper_32_bits(fusion->sense_phys_addr));
IOCInitMessage->HostMSIxVectors = instance->msix_vectors;
IOCInitMessage->HostPageSize = MR_DEFAULT_NVME_PAGE_SHIFT;
time = ktime_get_real();
/* Convert to milliseconds as per FW requirement */
IOCInitMessage->TimeStamp = cpu_to_le64(ktime_to_ms(time));
init_frame = (struct megasas_init_frame *)cmd->frame;
memset(init_frame, 0, IOC_INIT_FRAME_SIZE);
frame_hdr = &cmd->frame->hdr;
frame_hdr->cmd_status = 0xFF;
frame_hdr->flags = cpu_to_le16(
le16_to_cpu(frame_hdr->flags) |
MFI_FRAME_DONT_POST_IN_REPLY_QUEUE);
init_frame->cmd = MFI_CMD_INIT;
init_frame->cmd_status = 0xFF;
drv_ops = (MFI_CAPABILITIES *) &(init_frame->driver_operations);
/* driver support Extended MSIX */
if (instance->adapter_type >= INVADER_SERIES)
drv_ops->mfi_capabilities.support_additional_msix = 1;
/* driver supports HA / Remote LUN over Fast Path interface */
drv_ops->mfi_capabilities.support_fp_remote_lun = 1;
drv_ops->mfi_capabilities.support_max_255lds = 1;
drv_ops->mfi_capabilities.support_ndrive_r1_lb = 1;
drv_ops->mfi_capabilities.security_protocol_cmds_fw = 1;
if (instance->max_chain_frame_sz > MEGASAS_CHAIN_FRAME_SZ_MIN)
drv_ops->mfi_capabilities.support_ext_io_size = 1;
drv_ops->mfi_capabilities.support_fp_rlbypass = 1;
if (!dual_qdepth_disable)
drv_ops->mfi_capabilities.support_ext_queue_depth = 1;
drv_ops->mfi_capabilities.support_qd_throttling = 1;
drv_ops->mfi_capabilities.support_pd_map_target_id = 1;
drv_ops->mfi_capabilities.support_nvme_passthru = 1;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (instance->consistent_mask_64bit)
drv_ops->mfi_capabilities.support_64bit_mode = 1;
/* Convert capability to LE32 */
cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
sys_info = dmi_get_system_info(DMI_PRODUCT_UUID);
if (instance->system_info_buf && sys_info) {
memcpy(instance->system_info_buf->systemId, sys_info,
strlen(sys_info) > 64 ? 64 : strlen(sys_info));
instance->system_info_buf->systemIdLength =
strlen(sys_info) > 64 ? 64 : strlen(sys_info);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
init_frame->system_info_lo = cpu_to_le32(lower_32_bits(instance->system_info_h));
init_frame->system_info_hi = cpu_to_le32(upper_32_bits(instance->system_info_h));
}
init_frame->queue_info_new_phys_addr_hi =
cpu_to_le32(upper_32_bits(ioc_init_handle));
init_frame->queue_info_new_phys_addr_lo =
cpu_to_le32(lower_32_bits(ioc_init_handle));
init_frame->data_xfer_len = cpu_to_le32(sizeof(struct MPI2_IOC_INIT_REQUEST));
req_desc.u.low = cpu_to_le32(lower_32_bits(cmd->frame_phys_addr));
req_desc.u.high = cpu_to_le32(upper_32_bits(cmd->frame_phys_addr));
req_desc.MFAIo.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_MFA <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
/*
* disable the intr before firing the init frame
*/
instance->instancet->disable_intr(instance);
for (i = 0; i < (10 * 1000); i += 20) {
if (readl(&instance->reg_set->doorbell) & 1)
msleep(20);
else
break;
}
megasas_fire_cmd_fusion(instance, &req_desc);
wait_and_poll(instance, cmd, MFI_POLL_TIMEOUT_SECS);
frame_hdr = &cmd->frame->hdr;
if (frame_hdr->cmd_status != 0) {
ret = 1;
goto fail_fw_init;
}
return 0;
fail_fw_init:
dev_err(&instance->pdev->dev,
"Init cmd return status FAILED for SCSI host %d\n",
instance->host->host_no);
return ret;
}
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
/**
* megasas_sync_pd_seq_num - JBOD SEQ MAP
* @instance: Adapter soft state
* @pend: set to 1, if it is pended jbod map.
*
* Issue Jbod map to the firmware. If it is pended command,
* issue command and return. If it is first instance of jbod map
* issue and receive command.
*/
int
megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend) {
int ret = 0;
u32 pd_seq_map_sz;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct fusion_context *fusion = instance->ctrl_context;
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
dma_addr_t pd_seq_h;
pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id & 1)];
pd_seq_h = fusion->pd_seq_phys[(instance->pd_seq_map_id & 1)];
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
(sizeof(struct MR_PD_CFG_SEQ) *
(MAX_PHYSICAL_DEVICES - 1));
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_err(&instance->pdev->dev,
"Could not get mfi cmd. Fail from %s %d\n",
__func__, __LINE__);
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
memset(pd_sync, 0, pd_seq_map_sz);
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
if (pend) {
dcmd->mbox.b[0] = MEGASAS_DCMD_MBOX_PEND_FLAG;
dcmd->flags = MFI_FRAME_DIR_WRITE;
instance->jbod_seq_cmd = cmd;
} else {
dcmd->flags = MFI_FRAME_DIR_READ;
}
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(pd_seq_map_sz);
dcmd->opcode = cpu_to_le32(MR_DCMD_SYSTEM_PD_MAP_GET_INFO);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
megasas_set_dma_settings(instance, dcmd, pd_seq_h, pd_seq_map_sz);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
if (pend) {
instance->instancet->issue_dcmd(instance, cmd);
return 0;
}
/* Below code is only for non pended DCMD */
if (!instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
else
ret = megasas_issue_polled(instance, cmd);
if (le32_to_cpu(pd_sync->count) > MAX_PHYSICAL_DEVICES) {
dev_warn(&instance->pdev->dev,
"driver supports max %d JBOD, but FW reports %d\n",
MAX_PHYSICAL_DEVICES, le32_to_cpu(pd_sync->count));
ret = -EINVAL;
}
if (ret == DCMD_TIMEOUT)
megaraid_sas_kill_hba(instance);
if (ret == DCMD_SUCCESS)
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
instance->pd_seq_map_id++;
megasas_return_cmd(instance, cmd);
return ret;
}
/*
* megasas_get_ld_map_info - Returns FW's ld_map structure
* @instance: Adapter soft state
* @pend: Pend the command or not
* Issues an internal command (DCMD) to get the FW's controller PD
* list structure. This information is mainly used to find out SYSTEM
* supported by the FW.
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
* dcmd.mbox value setting for MR_DCMD_LD_MAP_GET_INFO
* dcmd.mbox.b[0] - number of LDs being sync'd
* dcmd.mbox.b[1] - 0 - complete command immediately.
* - 1 - pend till config change
* dcmd.mbox.b[2] - 0 - supports max 64 lds and uses legacy MR_FW_RAID_MAP
* - 1 - supports max MAX_LOGICAL_DRIVES_EXT lds and
* uses extended struct MR_FW_RAID_MAP_EXT
*/
static int
megasas_get_ld_map_info(struct megasas_instance *instance)
{
int ret = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
void *ci;
dma_addr_t ci_h = 0;
u32 size_map_info;
struct fusion_context *fusion;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get cmd for map info\n");
return -ENOMEM;
}
fusion = instance->ctrl_context;
if (!fusion) {
megasas_return_cmd(instance, cmd);
return -ENXIO;
}
dcmd = &cmd->frame->dcmd;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
size_map_info = fusion->current_map_sz;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
ci = (void *) fusion->ld_map[(instance->map_id & 1)];
ci_h = fusion->ld_map_phys[(instance->map_id & 1)];
if (!ci) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem for ld_map_info\n");
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
memset(ci, 0, fusion->max_map_sz);
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(size_map_info);
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
megasas_set_dma_settings(instance, dcmd, ci_h, size_map_info);
if (!instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
if (ret == DCMD_TIMEOUT)
megaraid_sas_kill_hba(instance);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return ret;
}
u8
megasas_get_map_info(struct megasas_instance *instance)
{
struct fusion_context *fusion = instance->ctrl_context;
fusion->fast_path_io = 0;
if (!megasas_get_ld_map_info(instance)) {
if (MR_ValidateMapInfo(instance, instance->map_id)) {
fusion->fast_path_io = 1;
return 0;
}
}
return 1;
}
/*
* megasas_sync_map_info - Returns FW's ld_map structure
* @instance: Adapter soft state
*
* Issues an internal command (DCMD) to get the FW's controller PD
* list structure. This information is mainly used to find out SYSTEM
* supported by the FW.
*/
int
megasas_sync_map_info(struct megasas_instance *instance)
{
int i;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-10 16:59:19 +08:00
u16 num_lds;
u32 size_sync_info;
struct fusion_context *fusion;
struct MR_LD_TARGET_SYNC *ci = NULL;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct MR_DRV_RAID_MAP_ALL *map;
struct MR_LD_RAID *raid;
struct MR_LD_TARGET_SYNC *ld_sync;
dma_addr_t ci_h = 0;
u32 size_map_info;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get cmd for sync info\n");
return -ENOMEM;
}
fusion = instance->ctrl_context;
if (!fusion) {
megasas_return_cmd(instance, cmd);
return 1;
}
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
map = fusion->ld_drv_map[instance->map_id & 1];
num_lds = le16_to_cpu(map->raidMap.ldCount);
dcmd = &cmd->frame->dcmd;
size_sync_info = sizeof(struct MR_LD_TARGET_SYNC) *num_lds;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
ci = (struct MR_LD_TARGET_SYNC *)
fusion->ld_map[(instance->map_id - 1) & 1];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
memset(ci, 0, fusion->max_map_sz);
ci_h = fusion->ld_map_phys[(instance->map_id - 1) & 1];
ld_sync = (struct MR_LD_TARGET_SYNC *)ci;
for (i = 0; i < num_lds; i++, ld_sync++) {
raid = MR_LdRaidGet(i, map);
ld_sync->targetId = MR_GetLDTgtId(i, map);
ld_sync->seqNum = raid->seqNum;
}
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
size_map_info = fusion->current_map_sz;
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
dcmd->flags = MFI_FRAME_DIR_WRITE;
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(size_map_info);
dcmd->mbox.b[0] = num_lds;
dcmd->mbox.b[1] = MEGASAS_DCMD_MBOX_PEND_FLAG;
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_MAP_GET_INFO);
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
megasas_set_dma_settings(instance, dcmd, ci_h, size_map_info);
instance->map_update_cmd = cmd;
instance->instancet->issue_dcmd(instance, cmd);
return 0;
}
/*
* meagasas_display_intel_branding - Display branding string
* @instance: per adapter object
*
* Return nothing.
*/
static void
megasas_display_intel_branding(struct megasas_instance *instance)
{
if (instance->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
return;
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_INVADER:
switch (instance->pdev->subsystem_device) {
case MEGARAID_INTEL_RS3DC080_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3DC080_BRANDING);
break;
case MEGARAID_INTEL_RS3DC040_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3DC040_BRANDING);
break;
case MEGARAID_INTEL_RS3SC008_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3SC008_BRANDING);
break;
case MEGARAID_INTEL_RS3MC044_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3MC044_BRANDING);
break;
default:
break;
}
break;
case PCI_DEVICE_ID_LSI_FURY:
switch (instance->pdev->subsystem_device) {
case MEGARAID_INTEL_RS3WC080_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3WC080_BRANDING);
break;
case MEGARAID_INTEL_RS3WC040_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RS3WC040_BRANDING);
break;
default:
break;
}
break;
case PCI_DEVICE_ID_LSI_CUTLASS_52:
case PCI_DEVICE_ID_LSI_CUTLASS_53:
switch (instance->pdev->subsystem_device) {
case MEGARAID_INTEL_RMS3BC160_SSDID:
dev_info(&instance->pdev->dev, "scsi host %d: %s\n",
instance->host->host_no,
MEGARAID_INTEL_RMS3BC160_BRANDING);
break;
default:
break;
}
break;
default:
break;
}
}
/**
* megasas_allocate_raid_maps - Allocate memory for RAID maps
* @instance: Adapter soft state
*
* return: if success: return 0
* failed: return -ENOMEM
*/
static inline int megasas_allocate_raid_maps(struct megasas_instance *instance)
{
struct fusion_context *fusion;
int i = 0;
fusion = instance->ctrl_context;
fusion->drv_map_pages = get_order(fusion->drv_map_sz);
for (i = 0; i < 2; i++) {
fusion->ld_map[i] = NULL;
fusion->ld_drv_map[i] = (void *)
__get_free_pages(__GFP_ZERO | GFP_KERNEL,
fusion->drv_map_pages);
if (!fusion->ld_drv_map[i]) {
fusion->ld_drv_map[i] = vzalloc(fusion->drv_map_sz);
if (!fusion->ld_drv_map[i]) {
dev_err(&instance->pdev->dev,
"Could not allocate memory for local map"
" size requested: %d\n",
fusion->drv_map_sz);
goto ld_drv_map_alloc_fail;
}
}
}
for (i = 0; i < 2; i++) {
fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
fusion->max_map_sz,
&fusion->ld_map_phys[i],
GFP_KERNEL);
if (!fusion->ld_map[i]) {
dev_err(&instance->pdev->dev,
"Could not allocate memory for map info %s:%d\n",
__func__, __LINE__);
goto ld_map_alloc_fail;
}
}
return 0;
ld_map_alloc_fail:
for (i = 0; i < 2; i++) {
if (fusion->ld_map[i])
dma_free_coherent(&instance->pdev->dev,
fusion->max_map_sz,
fusion->ld_map[i],
fusion->ld_map_phys[i]);
}
ld_drv_map_alloc_fail:
for (i = 0; i < 2; i++) {
if (fusion->ld_drv_map[i]) {
if (is_vmalloc_addr(fusion->ld_drv_map[i]))
vfree(fusion->ld_drv_map[i]);
else
free_pages((ulong)fusion->ld_drv_map[i],
fusion->drv_map_pages);
}
}
return -ENOMEM;
}
/**
* megasas_configure_queue_sizes - Calculate size of request desc queue,
* reply desc queue,
* IO request frame queue, set can_queue.
* @instance: Adapter soft state
* @return: void
*/
static inline
void megasas_configure_queue_sizes(struct megasas_instance *instance)
{
struct fusion_context *fusion;
u16 max_cmd;
fusion = instance->ctrl_context;
max_cmd = instance->max_fw_cmds;
if (instance->adapter_type == VENTURA_SERIES)
instance->max_mpt_cmds = instance->max_fw_cmds * RAID_1_PEER_CMDS;
else
instance->max_mpt_cmds = instance->max_fw_cmds;
instance->max_scsi_cmds = instance->max_fw_cmds -
(MEGASAS_FUSION_INTERNAL_CMDS +
MEGASAS_FUSION_IOCTL_CMDS);
instance->cur_can_queue = instance->max_scsi_cmds;
instance->host->can_queue = instance->cur_can_queue;
fusion->reply_q_depth = 2 * ((max_cmd + 1 + 15) / 16) * 16;
fusion->request_alloc_sz = sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *
instance->max_mpt_cmds;
fusion->reply_alloc_sz = sizeof(union MPI2_REPLY_DESCRIPTORS_UNION) *
(fusion->reply_q_depth);
fusion->io_frames_alloc_sz = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
* (instance->max_mpt_cmds + 1)); /* Extra 1 for SMID 0 */
}
static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance)
{
struct fusion_context *fusion;
struct megasas_cmd *cmd;
fusion = instance->ctrl_context;
cmd = kzalloc(sizeof(struct megasas_cmd), GFP_KERNEL);
if (!cmd) {
dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n",
__func__, __LINE__);
return -ENOMEM;
}
cmd->frame = dma_alloc_coherent(&instance->pdev->dev,
IOC_INIT_FRAME_SIZE,
&cmd->frame_phys_addr, GFP_KERNEL);
if (!cmd->frame) {
dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n",
__func__, __LINE__);
kfree(cmd);
return -ENOMEM;
}
fusion->ioc_init_cmd = cmd;
return 0;
}
/**
* megasas_free_ioc_init_cmd - Free IOC INIT command frame
* @instance: Adapter soft state
*/
static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance)
{
struct fusion_context *fusion;
fusion = instance->ctrl_context;
if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame)
dma_free_coherent(&instance->pdev->dev,
IOC_INIT_FRAME_SIZE,
fusion->ioc_init_cmd->frame,
fusion->ioc_init_cmd->frame_phys_addr);
if (fusion->ioc_init_cmd)
kfree(fusion->ioc_init_cmd);
}
/**
* megasas_init_adapter_fusion - Initializes the FW
* @instance: Adapter soft state
*
* This is the main function for initializing firmware.
*/
u32
megasas_init_adapter_fusion(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *reg_set;
struct fusion_context *fusion;
u32 scratch_pad_2;
int i = 0, count;
fusion = instance->ctrl_context;
reg_set = instance->reg_set;
megasas_fusion_update_can_queue(instance, PROBE_CONTEXT);
/*
* Only Driver's internal DCMDs and IOCTL DCMDs needs to have MFI frames
*/
instance->max_mfi_cmds =
MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS;
megasas_configure_queue_sizes(instance);
scratch_pad_2 = readl(&instance->reg_set->outbound_scratch_pad_2);
/* If scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK is set,
* Firmware support extended IO chain frame which is 4 times more than
* legacy Firmware.
* Legacy Firmware - Frame size is (8 * 128) = 1K
* 1M IO Firmware - Frame size is (8 * 128 * 4) = 4K
*/
if (scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK)
instance->max_chain_frame_sz =
((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_1MB_IO;
else
instance->max_chain_frame_sz =
((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >>
MEGASAS_MAX_CHAIN_SHIFT) * MEGASAS_256K_IO;
if (instance->max_chain_frame_sz < MEGASAS_CHAIN_FRAME_SZ_MIN) {
dev_warn(&instance->pdev->dev, "frame size %d invalid, fall back to legacy max frame size %d\n",
instance->max_chain_frame_sz,
MEGASAS_CHAIN_FRAME_SZ_MIN);
instance->max_chain_frame_sz = MEGASAS_CHAIN_FRAME_SZ_MIN;
}
fusion->max_sge_in_main_msg =
(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE
- offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
fusion->max_sge_in_chain =
instance->max_chain_frame_sz
/ sizeof(union MPI2_SGE_IO_UNION);
instance->max_num_sge =
rounddown_pow_of_two(fusion->max_sge_in_main_msg
+ fusion->max_sge_in_chain - 2);
/* Used for pass thru MFI frame (DCMD) */
fusion->chain_offset_mfi_pthru =
offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL)/16;
fusion->chain_offset_io_request =
(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
sizeof(union MPI2_SGE_IO_UNION))/16;
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
for (i = 0 ; i < count; i++)
fusion->last_reply_idx[i] = 0;
/*
* For fusion adapters, 3 commands for IOCTL and 8 commands
* for driver's internal DCMDs.
*/
instance->max_scsi_cmds = instance->max_fw_cmds -
(MEGASAS_FUSION_INTERNAL_CMDS +
MEGASAS_FUSION_IOCTL_CMDS);
sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS);
if (megasas_alloc_ioc_init_frame(instance))
return 1;
/*
* Allocate memory for descriptors
* Create a pool of commands
*/
if (megasas_alloc_cmds(instance))
goto fail_alloc_mfi_cmds;
if (megasas_alloc_cmds_fusion(instance))
goto fail_alloc_cmds;
if (megasas_ioc_init_fusion(instance))
goto fail_ioc_init;
megasas_display_intel_branding(instance);
if (megasas_get_ctrl_info(instance)) {
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
dev_err(&instance->pdev->dev,
"Could not get controller info. Fail from %s %d\n",
__func__, __LINE__);
goto fail_ioc_init;
}
instance->flag_ieee = 1;
instance->r1_ldio_hint_default = MR_R1_LDIO_PIGGYBACK_DEFAULT;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
fusion->fast_path_io = 0;
if (megasas_allocate_raid_maps(instance))
goto fail_ioc_init;
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
return 0;
fail_ioc_init:
megasas_free_cmds_fusion(instance);
fail_alloc_cmds:
megasas_free_cmds(instance);
fail_alloc_mfi_cmds:
megasas_free_ioc_init_cmd(instance);
return 1;
}
/**
* megasas_fault_detect_work - Worker function of
* FW fault handling workqueue.
*/
static void
megasas_fault_detect_work(struct work_struct *work)
{
struct megasas_instance *instance =
container_of(work, struct megasas_instance,
fw_fault_work.work);
u32 fw_state, dma_state, status;
/* Check the fw state */
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
MFI_STATE_MASK;
if (fw_state == MFI_STATE_FAULT) {
dma_state = instance->instancet->read_fw_status_reg(
instance->reg_set) & MFI_STATE_DMADONE;
/* Start collecting crash, if DMA bit is done */
if (instance->crash_dump_drv_support &&
instance->crash_dump_app_support && dma_state) {
megasas_fusion_crash_dump(instance);
} else {
if (instance->unload == 0) {
status = megasas_reset_fusion(instance->host, 0);
if (status != SUCCESS) {
dev_err(&instance->pdev->dev,
"Failed from %s %d, do not re-arm timer\n",
__func__, __LINE__);
return;
}
}
}
}
if (instance->fw_fault_work_q)
queue_delayed_work(instance->fw_fault_work_q,
&instance->fw_fault_work,
msecs_to_jiffies(MEGASAS_WATCHDOG_THREAD_INTERVAL));
}
int
megasas_fusion_start_watchdog(struct megasas_instance *instance)
{
/* Check if the Fault WQ is already started */
if (instance->fw_fault_work_q)
return SUCCESS;
INIT_DELAYED_WORK(&instance->fw_fault_work, megasas_fault_detect_work);
snprintf(instance->fault_handler_work_q_name,
sizeof(instance->fault_handler_work_q_name),
"poll_megasas%d_status", instance->host->host_no);
instance->fw_fault_work_q =
create_singlethread_workqueue(instance->fault_handler_work_q_name);
if (!instance->fw_fault_work_q) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return FAILED;
}
queue_delayed_work(instance->fw_fault_work_q,
&instance->fw_fault_work,
msecs_to_jiffies(MEGASAS_WATCHDOG_THREAD_INTERVAL));
return SUCCESS;
}
void
megasas_fusion_stop_watchdog(struct megasas_instance *instance)
{
struct workqueue_struct *wq;
if (instance->fw_fault_work_q) {
wq = instance->fw_fault_work_q;
instance->fw_fault_work_q = NULL;
if (!cancel_delayed_work_sync(&instance->fw_fault_work))
flush_workqueue(wq);
destroy_workqueue(wq);
}
}
/**
* map_cmd_status - Maps FW cmd status to OS cmd status
* @cmd : Pointer to cmd
* @status : status of cmd returned by FW
* @ext_status : ext status of cmd returned by FW
*/
void
map_cmd_status(struct fusion_context *fusion,
struct scsi_cmnd *scmd, u8 status, u8 ext_status,
u32 data_length, u8 *sense)
{
u8 cmd_type;
int resid;
cmd_type = megasas_cmd_type(scmd);
switch (status) {
case MFI_STAT_OK:
scmd->result = DID_OK << 16;
break;
case MFI_STAT_SCSI_IO_FAILED:
case MFI_STAT_LD_INIT_IN_PROGRESS:
scmd->result = (DID_ERROR << 16) | ext_status;
break;
case MFI_STAT_SCSI_DONE_WITH_ERROR:
scmd->result = (DID_OK << 16) | ext_status;
if (ext_status == SAM_STAT_CHECK_CONDITION) {
memset(scmd->sense_buffer, 0,
SCSI_SENSE_BUFFERSIZE);
memcpy(scmd->sense_buffer, sense,
SCSI_SENSE_BUFFERSIZE);
scmd->result |= DRIVER_SENSE << 24;
}
/*
* If the IO request is partially completed, then MR FW will
* update "io_request->DataLength" field with actual number of
* bytes transferred.Driver will set residual bytes count in
* SCSI command structure.
*/
resid = (scsi_bufflen(scmd) - data_length);
scsi_set_resid(scmd, resid);
if (resid &&
((cmd_type == READ_WRITE_LDIO) ||
(cmd_type == READ_WRITE_SYSPDIO)))
scmd_printk(KERN_INFO, scmd, "BRCM Debug mfi stat 0x%x, data len"
" requested/completed 0x%x/0x%x\n",
status, scsi_bufflen(scmd), data_length);
break;
case MFI_STAT_LD_OFFLINE:
case MFI_STAT_DEVICE_NOT_FOUND:
scmd->result = DID_BAD_TARGET << 16;
break;
case MFI_STAT_CONFIG_SEQ_MISMATCH:
scmd->result = DID_IMM_RETRY << 16;
break;
default:
scmd->result = DID_ERROR << 16;
break;
}
}
/**
* megasas_is_prp_possible -
* Checks if native NVMe PRPs can be built for the IO
*
* @instance: Adapter soft state
* @scmd: SCSI command from the mid-layer
* @sge_count: scatter gather element count.
*
* Returns: true: PRPs can be built
* false: IEEE SGLs needs to be built
*/
static bool
megasas_is_prp_possible(struct megasas_instance *instance,
struct scsi_cmnd *scmd, int sge_count)
{
struct fusion_context *fusion;
int i;
u32 data_length = 0;
struct scatterlist *sg_scmd;
bool build_prp = false;
u32 mr_nvme_pg_size;
mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
MR_DEFAULT_NVME_PAGE_SIZE);
fusion = instance->ctrl_context;
data_length = scsi_bufflen(scmd);
sg_scmd = scsi_sglist(scmd);
/*
* NVMe uses one PRP for each page (or part of a page)
* look at the data length - if 4 pages or less then IEEE is OK
* if > 5 pages then we need to build a native SGL
* if > 4 and <= 5 pages, then check physical address of 1st SG entry
* if this first size in the page is >= the residual beyond 4 pages
* then use IEEE, otherwise use native SGL
*/
if (data_length > (mr_nvme_pg_size * 5)) {
build_prp = true;
} else if ((data_length > (mr_nvme_pg_size * 4)) &&
(data_length <= (mr_nvme_pg_size * 5))) {
/* check if 1st SG entry size is < residual beyond 4 pages */
if (sg_dma_len(sg_scmd) < (data_length - (mr_nvme_pg_size * 4)))
build_prp = true;
}
/*
* Below code detects gaps/holes in IO data buffers.
* What does holes/gaps mean?
* Any SGE except first one in a SGL starts at non NVME page size
* aligned address OR Any SGE except last one in a SGL ends at
* non NVME page size boundary.
*
* Driver has already informed block layer by setting boundary rules for
* bio merging done at NVME page size boundary calling kernel API
* blk_queue_virt_boundary inside slave_config.
* Still there is possibility of IO coming with holes to driver because of
* IO merging done by IO scheduler.
*
* With SCSI BLK MQ enabled, there will be no IO with holes as there is no
* IO scheduling so no IO merging.
*
* With SCSI BLK MQ disabled, IO scheduler may attempt to merge IOs and
* then sending IOs with holes.
*
* Though driver can request block layer to disable IO merging by calling-
* blk_queue_flag_set(QUEUE_FLAG_NOMERGES, sdev->request_queue) but
* user may tune sysfs parameter- nomerges again to 0 or 1.
*
* If in future IO scheduling is enabled with SCSI BLK MQ,
* this algorithm to detect holes will be required in driver
* for SCSI BLK MQ enabled case as well.
*
*
*/
scsi_for_each_sg(scmd, sg_scmd, sge_count, i) {
if ((i != 0) && (i != (sge_count - 1))) {
if (mega_mod64(sg_dma_len(sg_scmd), mr_nvme_pg_size) ||
mega_mod64(sg_dma_address(sg_scmd),
mr_nvme_pg_size)) {
build_prp = false;
atomic_inc(&instance->sge_holes_type1);
break;
}
}
if ((sge_count > 1) && (i == 0)) {
if ((mega_mod64((sg_dma_address(sg_scmd) +
sg_dma_len(sg_scmd)),
mr_nvme_pg_size))) {
build_prp = false;
atomic_inc(&instance->sge_holes_type2);
break;
}
}
if ((sge_count > 1) && (i == (sge_count - 1))) {
if (mega_mod64(sg_dma_address(sg_scmd),
mr_nvme_pg_size)) {
build_prp = false;
atomic_inc(&instance->sge_holes_type3);
break;
}
}
}
return build_prp;
}
/**
* megasas_make_prp_nvme -
* Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only
*
* @instance: Adapter soft state
* @scmd: SCSI command from the mid-layer
* @sgl_ptr: SGL to be filled in
* @cmd: Fusion command frame
* @sge_count: scatter gather element count.
*
* Returns: true: PRPs are built
* false: IEEE SGLs needs to be built
*/
static bool
megasas_make_prp_nvme(struct megasas_instance *instance, struct scsi_cmnd *scmd,
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr,
struct megasas_cmd_fusion *cmd, int sge_count)
{
int sge_len, offset, num_prp_in_chain = 0;
struct MPI25_IEEE_SGE_CHAIN64 *main_chain_element, *ptr_first_sgl;
u64 *ptr_sgl;
dma_addr_t ptr_sgl_phys;
u64 sge_addr;
u32 page_mask, page_mask_result;
struct scatterlist *sg_scmd;
u32 first_prp_len;
bool build_prp = false;
int data_len = scsi_bufflen(scmd);
struct fusion_context *fusion;
u32 mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
MR_DEFAULT_NVME_PAGE_SIZE);
fusion = instance->ctrl_context;
build_prp = megasas_is_prp_possible(instance, scmd, sge_count);
if (!build_prp)
return false;
/*
* Nvme has a very convoluted prp format. One prp is required
* for each page or partial page. Driver need to split up OS sg_list
* entries if it is longer than one page or cross a page
* boundary. Driver also have to insert a PRP list pointer entry as
* the last entry in each physical page of the PRP list.
*
* NOTE: The first PRP "entry" is actually placed in the first
* SGL entry in the main message as IEEE 64 format. The 2nd
* entry in the main message is the chain element, and the rest
* of the PRP entries are built in the contiguous pcie buffer.
*/
page_mask = mr_nvme_pg_size - 1;
ptr_sgl = (u64 *)cmd->sg_frame;
ptr_sgl_phys = cmd->sg_frame_phys_addr;
memset(ptr_sgl, 0, instance->max_chain_frame_sz);
/* Build chain frame element which holds all prps except first*/
main_chain_element = (struct MPI25_IEEE_SGE_CHAIN64 *)
((u8 *)sgl_ptr + sizeof(struct MPI25_IEEE_SGE_CHAIN64));
main_chain_element->Address = cpu_to_le64(ptr_sgl_phys);
main_chain_element->NextChainOffset = 0;
main_chain_element->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
IEEE_SGE_FLAGS_SYSTEM_ADDR |
MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP;
/* Build first prp, sge need not to be page aligned*/
ptr_first_sgl = sgl_ptr;
sg_scmd = scsi_sglist(scmd);
sge_addr = sg_dma_address(sg_scmd);
sge_len = sg_dma_len(sg_scmd);
offset = (u32)(sge_addr & page_mask);
first_prp_len = mr_nvme_pg_size - offset;
ptr_first_sgl->Address = cpu_to_le64(sge_addr);
ptr_first_sgl->Length = cpu_to_le32(first_prp_len);
data_len -= first_prp_len;
if (sge_len > first_prp_len) {
sge_addr += first_prp_len;
sge_len -= first_prp_len;
} else if (sge_len == first_prp_len) {
sg_scmd = sg_next(sg_scmd);
sge_addr = sg_dma_address(sg_scmd);
sge_len = sg_dma_len(sg_scmd);
}
for (;;) {
offset = (u32)(sge_addr & page_mask);
/* Put PRP pointer due to page boundary*/
page_mask_result = (uintptr_t)(ptr_sgl + 1) & page_mask;
if (unlikely(!page_mask_result)) {
scmd_printk(KERN_NOTICE,
scmd, "page boundary ptr_sgl: 0x%p\n",
ptr_sgl);
ptr_sgl_phys += 8;
*ptr_sgl = cpu_to_le64(ptr_sgl_phys);
ptr_sgl++;
num_prp_in_chain++;
}
*ptr_sgl = cpu_to_le64(sge_addr);
ptr_sgl++;
ptr_sgl_phys += 8;
num_prp_in_chain++;
sge_addr += mr_nvme_pg_size;
sge_len -= mr_nvme_pg_size;
data_len -= mr_nvme_pg_size;
if (data_len <= 0)
break;
if (sge_len > 0)
continue;
sg_scmd = sg_next(sg_scmd);
sge_addr = sg_dma_address(sg_scmd);
sge_len = sg_dma_len(sg_scmd);
}
main_chain_element->Length =
cpu_to_le32(num_prp_in_chain * sizeof(u64));
atomic_inc(&instance->prp_sgl);
return build_prp;
}
/**
* megasas_make_sgl_fusion - Prepares 32-bit SGL
* @instance: Adapter soft state
* @scp: SCSI command from the mid-layer
* @sgl_ptr: SGL to be filled in
* @cmd: cmd we are working on
* @sge_count sge count
*
*/
static void
megasas_make_sgl_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scp,
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr,
struct megasas_cmd_fusion *cmd, int sge_count)
{
int i, sg_processed;
struct scatterlist *os_sgl;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
if (instance->adapter_type >= INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end = sgl_ptr;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
sgl_ptr_end->Flags = 0;
}
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
sgl_ptr->Length = cpu_to_le32(sg_dma_len(os_sgl));
sgl_ptr->Address = cpu_to_le64(sg_dma_address(os_sgl));
sgl_ptr->Flags = 0;
if (instance->adapter_type >= INVADER_SERIES)
if (i == sge_count - 1)
sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
sgl_ptr++;
sg_processed = i + 1;
if ((sg_processed == (fusion->max_sge_in_main_msg - 1)) &&
(sge_count > fusion->max_sge_in_main_msg)) {
struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
if (instance->adapter_type >= INVADER_SERIES) {
if ((le16_to_cpu(cmd->io_request->IoFlags) &
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) !=
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
cmd->io_request->ChainOffset =
fusion->
chain_offset_io_request;
else
cmd->io_request->ChainOffset = 0;
} else
cmd->io_request->ChainOffset =
fusion->chain_offset_io_request;
sg_chain = sgl_ptr;
/* Prepare chain element */
sg_chain->NextChainOffset = 0;
if (instance->adapter_type >= INVADER_SERIES)
sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
else
sg_chain->Flags =
(IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
sg_chain->Length = cpu_to_le32((sizeof(union MPI2_SGE_IO_UNION) * (sge_count - sg_processed)));
sg_chain->Address = cpu_to_le64(cmd->sg_frame_phys_addr);
sgl_ptr =
(struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
memset(sgl_ptr, 0, instance->max_chain_frame_sz);
}
}
atomic_inc(&instance->ieee_sgl);
}
/**
* megasas_make_sgl - Build Scatter Gather List(SGLs)
* @scp: SCSI command pointer
* @instance: Soft instance of controller
* @cmd: Fusion command pointer
*
* This function will build sgls based on device type.
* For nvme drives, there is different way of building sgls in nvme native
* format- PRPs(Physical Region Page).
*
* Returns the number of sg lists actually used, zero if the sg lists
* is NULL, or -ENOMEM if the mapping failed
*/
static
int megasas_make_sgl(struct megasas_instance *instance, struct scsi_cmnd *scp,
struct megasas_cmd_fusion *cmd)
{
int sge_count;
bool build_prp = false;
struct MPI25_IEEE_SGE_CHAIN64 *sgl_chain64;
sge_count = scsi_dma_map(scp);
if ((sge_count > instance->max_num_sge) || (sge_count <= 0))
return sge_count;
sgl_chain64 = (struct MPI25_IEEE_SGE_CHAIN64 *)&cmd->io_request->SGL;
if ((le16_to_cpu(cmd->io_request->IoFlags) &
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) &&
(cmd->pd_interface == NVME_PD))
build_prp = megasas_make_prp_nvme(instance, scp, sgl_chain64,
cmd, sge_count);
if (!build_prp)
megasas_make_sgl_fusion(instance, scp, sgl_chain64,
cmd, sge_count);
return sge_count;
}
/**
* megasas_set_pd_lba - Sets PD LBA
* @cdb: CDB
* @cdb_len: cdb length
* @start_blk: Start block of IO
*
* Used to set the PD LBA in CDB for FP IOs
*/
void
megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len,
struct IO_REQUEST_INFO *io_info, struct scsi_cmnd *scp,
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct MR_DRV_RAID_MAP_ALL *local_map_ptr, u32 ref_tag)
{
struct MR_LD_RAID *raid;
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-10 16:59:19 +08:00
u16 ld;
u64 start_blk = io_info->pdBlock;
u8 *cdb = io_request->CDB.CDB32;
u32 num_blocks = io_info->numBlocks;
u8 opcode = 0, flagvals = 0, groupnum = 0, control = 0;
/* Check if T10 PI (DIF) is enabled for this LD */
ld = MR_TargetIdToLdGet(io_info->ldTgtId, local_map_ptr);
raid = MR_LdRaidGet(ld, local_map_ptr);
if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) {
memset(cdb, 0, sizeof(io_request->CDB.CDB32));
cdb[0] = MEGASAS_SCSI_VARIABLE_LENGTH_CMD;
cdb[7] = MEGASAS_SCSI_ADDL_CDB_LEN;
if (scp->sc_data_direction == DMA_FROM_DEVICE)
cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_READ32;
else
cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_WRITE32;
cdb[10] = MEGASAS_RD_WR_PROTECT_CHECK_ALL;
/* LBA */
cdb[12] = (u8)((start_blk >> 56) & 0xff);
cdb[13] = (u8)((start_blk >> 48) & 0xff);
cdb[14] = (u8)((start_blk >> 40) & 0xff);
cdb[15] = (u8)((start_blk >> 32) & 0xff);
cdb[16] = (u8)((start_blk >> 24) & 0xff);
cdb[17] = (u8)((start_blk >> 16) & 0xff);
cdb[18] = (u8)((start_blk >> 8) & 0xff);
cdb[19] = (u8)(start_blk & 0xff);
/* Logical block reference tag */
io_request->CDB.EEDP32.PrimaryReferenceTag =
cpu_to_be32(ref_tag);
io_request->CDB.EEDP32.PrimaryApplicationTagMask = cpu_to_be16(0xffff);
io_request->IoFlags = cpu_to_le16(32); /* Specify 32-byte cdb */
/* Transfer length */
cdb[28] = (u8)((num_blocks >> 24) & 0xff);
cdb[29] = (u8)((num_blocks >> 16) & 0xff);
cdb[30] = (u8)((num_blocks >> 8) & 0xff);
cdb[31] = (u8)(num_blocks & 0xff);
/* set SCSI IO EEDPFlags */
if (scp->sc_data_direction == DMA_FROM_DEVICE) {
io_request->EEDPFlags = cpu_to_le16(
MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP |
MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG |
MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE |
MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD);
} else {
io_request->EEDPFlags = cpu_to_le16(
MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_INSERT_OP);
}
io_request->Control |= cpu_to_le32((0x4 << 26));
io_request->EEDPBlockSize = cpu_to_le32(scp->device->sector_size);
} else {
/* Some drives don't support 16/12 byte CDB's, convert to 10 */
if (((cdb_len == 12) || (cdb_len == 16)) &&
(start_blk <= 0xffffffff)) {
if (cdb_len == 16) {
opcode = cdb[0] == READ_16 ? READ_10 : WRITE_10;
flagvals = cdb[1];
groupnum = cdb[14];
control = cdb[15];
} else {
opcode = cdb[0] == READ_12 ? READ_10 : WRITE_10;
flagvals = cdb[1];
groupnum = cdb[10];
control = cdb[11];
}
memset(cdb, 0, sizeof(io_request->CDB.CDB32));
cdb[0] = opcode;
cdb[1] = flagvals;
cdb[6] = groupnum;
cdb[9] = control;
/* Transfer length */
cdb[8] = (u8)(num_blocks & 0xff);
cdb[7] = (u8)((num_blocks >> 8) & 0xff);
io_request->IoFlags = cpu_to_le16(10); /* Specify 10-byte cdb */
cdb_len = 10;
} else if ((cdb_len < 16) && (start_blk > 0xffffffff)) {
/* Convert to 16 byte CDB for large LBA's */
switch (cdb_len) {
case 6:
opcode = cdb[0] == READ_6 ? READ_16 : WRITE_16;
control = cdb[5];
break;
case 10:
opcode =
cdb[0] == READ_10 ? READ_16 : WRITE_16;
flagvals = cdb[1];
groupnum = cdb[6];
control = cdb[9];
break;
case 12:
opcode =
cdb[0] == READ_12 ? READ_16 : WRITE_16;
flagvals = cdb[1];
groupnum = cdb[10];
control = cdb[11];
break;
}
memset(cdb, 0, sizeof(io_request->CDB.CDB32));
cdb[0] = opcode;
cdb[1] = flagvals;
cdb[14] = groupnum;
cdb[15] = control;
/* Transfer length */
cdb[13] = (u8)(num_blocks & 0xff);
cdb[12] = (u8)((num_blocks >> 8) & 0xff);
cdb[11] = (u8)((num_blocks >> 16) & 0xff);
cdb[10] = (u8)((num_blocks >> 24) & 0xff);
io_request->IoFlags = cpu_to_le16(16); /* Specify 16-byte cdb */
cdb_len = 16;
}
/* Normal case, just load LBA here */
switch (cdb_len) {
case 6:
{
u8 val = cdb[1] & 0xE0;
cdb[3] = (u8)(start_blk & 0xff);
cdb[2] = (u8)((start_blk >> 8) & 0xff);
cdb[1] = val | ((u8)(start_blk >> 16) & 0x1f);
break;
}
case 10:
cdb[5] = (u8)(start_blk & 0xff);
cdb[4] = (u8)((start_blk >> 8) & 0xff);
cdb[3] = (u8)((start_blk >> 16) & 0xff);
cdb[2] = (u8)((start_blk >> 24) & 0xff);
break;
case 12:
cdb[5] = (u8)(start_blk & 0xff);
cdb[4] = (u8)((start_blk >> 8) & 0xff);
cdb[3] = (u8)((start_blk >> 16) & 0xff);
cdb[2] = (u8)((start_blk >> 24) & 0xff);
break;
case 16:
cdb[9] = (u8)(start_blk & 0xff);
cdb[8] = (u8)((start_blk >> 8) & 0xff);
cdb[7] = (u8)((start_blk >> 16) & 0xff);
cdb[6] = (u8)((start_blk >> 24) & 0xff);
cdb[5] = (u8)((start_blk >> 32) & 0xff);
cdb[4] = (u8)((start_blk >> 40) & 0xff);
cdb[3] = (u8)((start_blk >> 48) & 0xff);
cdb[2] = (u8)((start_blk >> 56) & 0xff);
break;
}
}
}
/**
* megasas_stream_detect - stream detection on read and and write IOs
* @instance: Adapter soft state
* @cmd: Command to be prepared
* @io_info: IO Request info
*
*/
/** stream detection on read and and write IOs */
static void megasas_stream_detect(struct megasas_instance *instance,
struct megasas_cmd_fusion *cmd,
struct IO_REQUEST_INFO *io_info)
{
struct fusion_context *fusion = instance->ctrl_context;
u32 device_id = io_info->ldTgtId;
struct LD_STREAM_DETECT *current_ld_sd
= fusion->stream_detect_by_ld[device_id];
u32 *track_stream = &current_ld_sd->mru_bit_map, stream_num;
u32 shifted_values, unshifted_values;
u32 index_value_mask, shifted_values_mask;
int i;
bool is_read_ahead = false;
struct STREAM_DETECT *current_sd;
/* find possible stream */
for (i = 0; i < MAX_STREAMS_TRACKED; ++i) {
stream_num = (*track_stream >>
(i * BITS_PER_INDEX_STREAM)) &
STREAM_MASK;
current_sd = &current_ld_sd->stream_track[stream_num];
/* if we found a stream, update the raid
* context and also update the mruBitMap
*/
/* boundary condition */
if ((current_sd->next_seq_lba) &&
(io_info->ldStartBlock >= current_sd->next_seq_lba) &&
(io_info->ldStartBlock <= (current_sd->next_seq_lba + 32)) &&
(current_sd->is_read == io_info->isRead)) {
if ((io_info->ldStartBlock != current_sd->next_seq_lba) &&
((!io_info->isRead) || (!is_read_ahead)))
/*
* Once the API availible we need to change this.
* At this point we are not allowing any gap
*/
continue;
SET_STREAM_DETECTED(cmd->io_request->RaidContext.raid_context_g35);
current_sd->next_seq_lba =
io_info->ldStartBlock + io_info->numBlocks;
/*
* update the mruBitMap LRU
*/
shifted_values_mask =
(1 << i * BITS_PER_INDEX_STREAM) - 1;
shifted_values = ((*track_stream & shifted_values_mask)
<< BITS_PER_INDEX_STREAM);
index_value_mask =
STREAM_MASK << i * BITS_PER_INDEX_STREAM;
unshifted_values =
*track_stream & ~(shifted_values_mask |
index_value_mask);
*track_stream =
unshifted_values | shifted_values | stream_num;
return;
}
}
/*
* if we did not find any stream, create a new one
* from the least recently used
*/
stream_num = (*track_stream >>
((MAX_STREAMS_TRACKED - 1) * BITS_PER_INDEX_STREAM)) &
STREAM_MASK;
current_sd = &current_ld_sd->stream_track[stream_num];
current_sd->is_read = io_info->isRead;
current_sd->next_seq_lba = io_info->ldStartBlock + io_info->numBlocks;
*track_stream = (((*track_stream & ZERO_LAST_STREAM) << 4) | stream_num);
return;
}
/**
* megasas_set_raidflag_cpu_affinity - This function sets the cpu
* affinity (cpu of the controller) and raid_flags in the raid context
* based on IO type.
*
* @praid_context: IO RAID context
* @raid: LD raid map
* @fp_possible: Is fast path possible?
* @is_read: Is read IO?
*
*/
static void
megasas_set_raidflag_cpu_affinity(union RAID_CONTEXT_UNION *praid_context,
struct MR_LD_RAID *raid, bool fp_possible,
u8 is_read, u32 scsi_buff_len)
{
u8 cpu_sel = MR_RAID_CTX_CPUSEL_0;
struct RAID_CONTEXT_G35 *rctx_g35;
rctx_g35 = &praid_context->raid_context_g35;
if (fp_possible) {
if (is_read) {
if ((raid->cpuAffinity.pdRead.cpu0) &&
(raid->cpuAffinity.pdRead.cpu1))
cpu_sel = MR_RAID_CTX_CPUSEL_FCFS;
else if (raid->cpuAffinity.pdRead.cpu1)
cpu_sel = MR_RAID_CTX_CPUSEL_1;
} else {
if ((raid->cpuAffinity.pdWrite.cpu0) &&
(raid->cpuAffinity.pdWrite.cpu1))
cpu_sel = MR_RAID_CTX_CPUSEL_FCFS;
else if (raid->cpuAffinity.pdWrite.cpu1)
cpu_sel = MR_RAID_CTX_CPUSEL_1;
/* Fast path cache by pass capable R0/R1 VD */
if ((raid->level <= 1) &&
(raid->capability.fp_cache_bypass_capable)) {
rctx_g35->routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SLD_SHIFT);
rctx_g35->raid_flags =
(MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS
<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT);
}
}
} else {
if (is_read) {
if ((raid->cpuAffinity.ldRead.cpu0) &&
(raid->cpuAffinity.ldRead.cpu1))
cpu_sel = MR_RAID_CTX_CPUSEL_FCFS;
else if (raid->cpuAffinity.ldRead.cpu1)
cpu_sel = MR_RAID_CTX_CPUSEL_1;
} else {
if ((raid->cpuAffinity.ldWrite.cpu0) &&
(raid->cpuAffinity.ldWrite.cpu1))
cpu_sel = MR_RAID_CTX_CPUSEL_FCFS;
else if (raid->cpuAffinity.ldWrite.cpu1)
cpu_sel = MR_RAID_CTX_CPUSEL_1;
if (is_stream_detected(rctx_g35) &&
((raid->level == 5) || (raid->level == 6)) &&
(raid->writeMode == MR_RL_WRITE_THROUGH_MODE) &&
(cpu_sel == MR_RAID_CTX_CPUSEL_FCFS))
cpu_sel = MR_RAID_CTX_CPUSEL_0;
}
}
rctx_g35->routing_flags |=
(cpu_sel << MR_RAID_CTX_ROUTINGFLAGS_CPUSEL_SHIFT);
/* Always give priority to MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT
* vs MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS.
* IO Subtype is not bitmap.
*/
if ((raid->level == 1) && (!is_read)) {
if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE)
praid_context->raid_context_g35.raid_flags =
(MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT
<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT);
}
}
/**
* megasas_build_ldio_fusion - Prepares IOs to devices
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared
*
* Prepares the io_request and chain elements (sg_frame) for IO
* The IO can be for PD (Fast Path) or LD
*/
void
megasas_build_ldio_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scp,
struct megasas_cmd_fusion *cmd)
{
bool fp_possible;
u16 ld;
u32 start_lba_lo, start_lba_hi, device_id, datalength = 0;
u32 scsi_buff_len;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
struct IO_REQUEST_INFO io_info;
struct fusion_context *fusion;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
u8 *raidLUN;
unsigned long spinlock_flags;
union RAID_CONTEXT_UNION *praid_context;
struct MR_LD_RAID *raid = NULL;
struct MR_PRIV_DEVICE *mrdev_priv;
device_id = MEGASAS_DEV_INDEX(scp);
fusion = instance->ctrl_context;
io_request = cmd->io_request;
io_request->RaidContext.raid_context.virtual_disk_tgt_id =
cpu_to_le16(device_id);
io_request->RaidContext.raid_context.status = 0;
io_request->RaidContext.raid_context.ex_status = 0;
req_desc = (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)cmd->request_desc;
start_lba_lo = 0;
start_lba_hi = 0;
fp_possible = false;
/*
* 6-byte READ(0x08) or WRITE(0x0A) cdb
*/
if (scp->cmd_len == 6) {
datalength = (u32) scp->cmnd[4];
start_lba_lo = ((u32) scp->cmnd[1] << 16) |
((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
start_lba_lo &= 0x1FFFFF;
}
/*
* 10-byte READ(0x28) or WRITE(0x2A) cdb
*/
else if (scp->cmd_len == 10) {
datalength = (u32) scp->cmnd[8] |
((u32) scp->cmnd[7] << 8);
start_lba_lo = ((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
}
/*
* 12-byte READ(0xA8) or WRITE(0xAA) cdb
*/
else if (scp->cmd_len == 12) {
datalength = ((u32) scp->cmnd[6] << 24) |
((u32) scp->cmnd[7] << 16) |
((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
start_lba_lo = ((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
}
/*
* 16-byte READ(0x88) or WRITE(0x8A) cdb
*/
else if (scp->cmd_len == 16) {
datalength = ((u32) scp->cmnd[10] << 24) |
((u32) scp->cmnd[11] << 16) |
((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
start_lba_lo = ((u32) scp->cmnd[6] << 24) |
((u32) scp->cmnd[7] << 16) |
((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
start_lba_hi = ((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
}
memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
io_info.ldStartBlock = ((u64)start_lba_hi << 32) | start_lba_lo;
io_info.numBlocks = datalength;
io_info.ldTgtId = device_id;
io_info.r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
scsi_buff_len = scsi_bufflen(scp);
io_request->DataLength = cpu_to_le32(scsi_buff_len);
if (scp->sc_data_direction == DMA_FROM_DEVICE)
io_info.isRead = 1;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-10 16:59:19 +08:00
if (ld < instance->fw_supported_vd_count)
raid = MR_LdRaidGet(ld, local_map_ptr);
if (!raid || (!fusion->fast_path_io)) {
io_request->RaidContext.raid_context.reg_lock_flags = 0;
fp_possible = false;
} else {
if (MR_BuildRaidContext(instance, &io_info,
&io_request->RaidContext.raid_context,
local_map_ptr, &raidLUN))
fp_possible = (io_info.fpOkForIo > 0) ? true : false;
}
cmd->request_desc->SCSIIO.MSIxIndex =
instance->reply_map[raw_smp_processor_id()];
praid_context = &io_request->RaidContext;
if (instance->adapter_type == VENTURA_SERIES) {
/* FP for Optimal raid level 1.
* All large RAID-1 writes (> 32 KiB, both WT and WB modes)
* are built by the driver as LD I/Os.
* All small RAID-1 WT writes (<= 32 KiB) are built as FP I/Os
* (there is never a reason to process these as buffered writes)
* All small RAID-1 WB writes (<= 32 KiB) are built as FP I/Os
* with the SLD bit asserted.
*/
if (io_info.r1_alt_dev_handle != MR_DEVHANDLE_INVALID) {
mrdev_priv = scp->device->hostdata;
if (atomic_inc_return(&instance->fw_outstanding) >
(instance->host->can_queue)) {
fp_possible = false;
atomic_dec(&instance->fw_outstanding);
} else if ((scsi_buff_len > MR_LARGE_IO_MIN_SIZE) ||
(atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint) > 0)) {
fp_possible = false;
atomic_dec(&instance->fw_outstanding);
if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE)
atomic_set(&mrdev_priv->r1_ldio_hint,
instance->r1_ldio_hint_default);
}
}
if (!fp_possible ||
(io_info.isRead && io_info.ra_capable)) {
spin_lock_irqsave(&instance->stream_lock,
spinlock_flags);
megasas_stream_detect(instance, cmd, &io_info);
spin_unlock_irqrestore(&instance->stream_lock,
spinlock_flags);
/* In ventura if stream detected for a read and it is
* read ahead capable make this IO as LDIO
*/
if (is_stream_detected(&io_request->RaidContext.raid_context_g35))
fp_possible = false;
}
/* If raid is NULL, set CPU affinity to default CPU0 */
if (raid)
megasas_set_raidflag_cpu_affinity(praid_context,
raid, fp_possible, io_info.isRead,
scsi_buff_len);
else
praid_context->raid_context_g35.routing_flags |=
(MR_RAID_CTX_CPUSEL_0 << MR_RAID_CTX_ROUTINGFLAGS_CPUSEL_SHIFT);
}
if (fp_possible) {
megasas_set_pd_lba(io_request, scp->cmd_len, &io_info, scp,
local_map_ptr, start_lba_lo);
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
if (instance->adapter_type == INVADER_SERIES) {
if (io_request->RaidContext.raid_context.reg_lock_flags ==
REGION_TYPE_UNUSED)
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
io_request->RaidContext.raid_context.type
= MPI2_TYPE_CUDA;
io_request->RaidContext.raid_context.nseg = 0x1;
io_request->IoFlags |= cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
io_request->RaidContext.raid_context.reg_lock_flags |=
(MR_RL_FLAGS_GRANT_DESTINATION_CUDA |
MR_RL_FLAGS_SEQ_NUM_ENABLE);
} else if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.nseg_type |=
(1 << RAID_CONTEXT_NSEG_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
(MPI2_TYPE_CUDA << RAID_CONTEXT_TYPE_SHIFT);
io_request->RaidContext.raid_context_g35.routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT);
io_request->IoFlags |=
cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
}
if (fusion->load_balance_info &&
(fusion->load_balance_info[device_id].loadBalanceFlag) &&
(io_info.isRead)) {
io_info.devHandle =
get_updated_dev_handle(instance,
&fusion->load_balance_info[device_id],
&io_info, local_map_ptr);
scp->SCp.Status |= MEGASAS_LOAD_BALANCE_FLAG;
cmd->pd_r1_lb = io_info.pd_after_lb;
if (instance->adapter_type == VENTURA_SERIES)
io_request->RaidContext.raid_context_g35.span_arm
= io_info.span_arm;
else
io_request->RaidContext.raid_context.span_arm
= io_info.span_arm;
} else
scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
if (instance->adapter_type == VENTURA_SERIES)
cmd->r1_alt_dev_handle = io_info.r1_alt_dev_handle;
else
cmd->r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
if ((raidLUN[0] == 1) &&
(local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].validHandles > 1)) {
instance->dev_handle = !(instance->dev_handle);
io_info.devHandle =
local_map_ptr->raidMap.devHndlInfo[io_info.pd_after_lb].devHandle[instance->dev_handle];
}
cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle;
io_request->DevHandle = io_info.devHandle;
cmd->pd_interface = io_info.pd_interface;
/* populate the LUN field */
memcpy(io_request->LUN, raidLUN, 8);
} else {
io_request->RaidContext.raid_context.timeout_value =
cpu_to_le16(local_map_ptr->raidMap.fpPdIoTimeoutSec);
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
<< MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
if (instance->adapter_type == INVADER_SERIES) {
if (io_info.do_fp_rlbypass ||
(io_request->RaidContext.raid_context.reg_lock_flags
== REGION_TYPE_UNUSED))
cmd->request_desc->SCSIIO.RequestFlags =
(MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
io_request->RaidContext.raid_context.type
= MPI2_TYPE_CUDA;
io_request->RaidContext.raid_context.reg_lock_flags |=
(MR_RL_FLAGS_GRANT_DESTINATION_CPU0 |
MR_RL_FLAGS_SEQ_NUM_ENABLE);
io_request->RaidContext.raid_context.nseg = 0x1;
} else if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
(1 << RAID_CONTEXT_NSEG_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
(MPI2_TYPE_CUDA << RAID_CONTEXT_TYPE_SHIFT);
}
io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
io_request->DevHandle = cpu_to_le16(device_id);
} /* Not FP */
}
/**
* megasas_build_ld_nonrw_fusion - prepares non rw ios for virtual disk
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared
*
* Prepares the io_request frame for non-rw io cmds for vd.
*/
static void megasas_build_ld_nonrw_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scmd, struct megasas_cmd_fusion *cmd)
{
u32 device_id;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
u16 ld;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
struct fusion_context *fusion = instance->ctrl_context;
u8 span, physArm;
__le16 devHandle;
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-10 16:59:19 +08:00
u32 arRef, pd;
struct MR_LD_RAID *raid;
struct RAID_CONTEXT *pRAID_Context;
u8 fp_possible = 1;
io_request = cmd->io_request;
device_id = MEGASAS_DEV_INDEX(scmd);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
/* get RAID_Context pointer */
pRAID_Context = &io_request->RaidContext.raid_context;
/* Check with FW team */
pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id);
pRAID_Context->reg_lock_row_lba = 0;
pRAID_Context->reg_lock_length = 0;
if (fusion->fast_path_io && (
device_id < instance->fw_supported_vd_count)) {
ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
if (ld >= instance->fw_supported_vd_count)
fp_possible = 0;
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Change MR_TargetIdToLdGet return type from u8 to u16. ld id range check is added at two places in this patch - @megasas_build_ldio_fusion and @megasas_build_ld_nonrw_fusion. Previous driver code used different data type for lds TargetId returned from MR_TargetIdToLdGet. Prior to this change, above two functions was safeguarded due to function always return u8 and maximum value of ld id returned was 255. In below check, fw_supported_vd_count as of today is 64 or 256 and valid range to support is either 0-63 or 0-255. Ideally want to filter accessing raid map for ld ids which are not valid. With the u16 change, invalid ld id value is 0xFFFF and we will see kernel panic due to random memory access in MR_LdRaidGet. The changes will ensure we do not call MR_LdRaidGet if ld id is beyond size of ldSpanMap array. if (ld < instance->fw_supported_vd_count) >From firmware perspective,ld id 0xFF is invalid and even though current driver code forward such command, firmware fails with target not available. ld target id issue occurs mainly whenever driver loops to populate raid map (ea. MR_ValidateMapInfo). These are the only two places where we may see out of range target ids and wants to protect raid map access based on range provided by Firmware API. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-10 16:59:19 +08:00
else {
raid = MR_LdRaidGet(ld, local_map_ptr);
if (!(raid->capability.fpNonRWCapable))
fp_possible = 0;
}
} else
fp_possible = 0;
if (!fp_possible) {
io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
io_request->DevHandle = cpu_to_le16(device_id);
io_request->LUN[1] = scmd->device->lun;
pRAID_Context->timeout_value =
cpu_to_le16 (scmd->request->timeout / HZ);
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
} else {
/* set RAID context values */
pRAID_Context->config_seq_num = raid->seqNum;
if (instance->adapter_type != VENTURA_SERIES)
pRAID_Context->reg_lock_flags = REGION_TYPE_SHARED_READ;
pRAID_Context->timeout_value =
cpu_to_le16(raid->fpIoTimeoutForLd);
/* get the DevHandle for the PD (since this is
fpNonRWCapable, this is a single disk RAID0) */
span = physArm = 0;
arRef = MR_LdSpanArrayGet(ld, span, local_map_ptr);
pd = MR_ArPdGet(arRef, physArm, local_map_ptr);
devHandle = MR_PdDevHandleGet(pd, local_map_ptr);
/* build request descriptor */
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
cmd->request_desc->SCSIIO.DevHandle = devHandle;
/* populate the LUN field */
memcpy(io_request->LUN, raid->LUN, 8);
/* build the raidScsiIO structure */
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
io_request->DevHandle = devHandle;
}
}
/**
* megasas_build_syspd_fusion - prepares rw/non-rw ios for syspd
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared
* @fp_possible: parameter to detect fast path or firmware path io.
*
* Prepares the io_request frame for rw/non-rw io cmds for syspds
*/
static void
megasas_build_syspd_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scmd, struct megasas_cmd_fusion *cmd,
bool fp_possible)
{
u32 device_id;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
u16 pd_index = 0;
u16 os_timeout_value;
u16 timeout_limit;
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
struct RAID_CONTEXT *pRAID_Context;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
struct MR_PRIV_DEVICE *mr_device_priv_data;
struct fusion_context *fusion = instance->ctrl_context;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
pd_sync = (void *)fusion->pd_seq_sync[(instance->pd_seq_map_id - 1) & 1];
device_id = MEGASAS_DEV_INDEX(scmd);
pd_index = MEGASAS_PD_INDEX(scmd);
os_timeout_value = scmd->request->timeout / HZ;
mr_device_priv_data = scmd->device->hostdata;
cmd->pd_interface = mr_device_priv_data->interface_type;
io_request = cmd->io_request;
/* get RAID_Context pointer */
pRAID_Context = &io_request->RaidContext.raid_context;
pRAID_Context->reg_lock_flags = 0;
pRAID_Context->reg_lock_row_lba = 0;
pRAID_Context->reg_lock_length = 0;
io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
io_request->LUN[1] = scmd->device->lun;
pRAID_Context->raid_flags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
/* If FW supports PD sequence number */
if (instance->use_seqnum_jbod_fp &&
instance->pd_list[pd_index].driveType == TYPE_DISK) {
/* TgtId must be incremented by 255 as jbod seq number is index
* below raid map
*/
/* More than 256 PD/JBOD support for Ventura */
if (instance->support_morethan256jbod)
pRAID_Context->virtual_disk_tgt_id =
pd_sync->seq[pd_index].pd_target_id;
else
pRAID_Context->virtual_disk_tgt_id =
cpu_to_le16(device_id + (MAX_PHYSICAL_DEVICES - 1));
pRAID_Context->config_seq_num = pd_sync->seq[pd_index].seqNum;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
io_request->DevHandle = pd_sync->seq[pd_index].devHandle;
if (instance->adapter_type == VENTURA_SERIES) {
io_request->RaidContext.raid_context_g35.routing_flags |=
(1 << MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
(1 << RAID_CONTEXT_NSEG_SHIFT);
io_request->RaidContext.raid_context_g35.nseg_type |=
(MPI2_TYPE_CUDA << RAID_CONTEXT_TYPE_SHIFT);
} else {
pRAID_Context->type = MPI2_TYPE_CUDA;
pRAID_Context->nseg = 0x1;
pRAID_Context->reg_lock_flags |=
(MR_RL_FLAGS_SEQ_NUM_ENABLE|MR_RL_FLAGS_GRANT_DESTINATION_CUDA);
}
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
} else if (fusion->fast_path_io) {
pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id);
pRAID_Context->config_seq_num = 0;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
io_request->DevHandle =
local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
} else {
/* Want to send all IO via FW path */
pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id);
pRAID_Context->config_seq_num = 0;
io_request->DevHandle = cpu_to_le16(0xFFFF);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
}
cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
cmd->request_desc->SCSIIO.MSIxIndex =
instance->reply_map[raw_smp_processor_id()];
if (!fp_possible) {
/* system pd firmware path */
io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
pRAID_Context->timeout_value = cpu_to_le16(os_timeout_value);
pRAID_Context->virtual_disk_tgt_id = cpu_to_le16(device_id);
} else {
if (os_timeout_value)
os_timeout_value++;
/* system pd Fast Path */
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
timeout_limit = (scmd->device->type == TYPE_DISK) ?
255 : 0xFFFF;
pRAID_Context->timeout_value =
cpu_to_le16((os_timeout_value > timeout_limit) ?
timeout_limit : os_timeout_value);
if (instance->adapter_type >= INVADER_SERIES)
io_request->IoFlags |=
cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
cmd->request_desc->SCSIIO.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
}
}
/**
* megasas_build_io_fusion - Prepares IOs to devices
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared
*
* Invokes helper functions to prepare request frames
* and sets flags appropriate for IO/Non-IO cmd
*/
int
megasas_build_io_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scp,
struct megasas_cmd_fusion *cmd)
{
int sge_count;
u8 cmd_type;
struct MPI2_RAID_SCSI_IO_REQUEST *io_request = cmd->io_request;
struct MR_PRIV_DEVICE *mr_device_priv_data;
mr_device_priv_data = scp->device->hostdata;
/* Zero out some fields so they don't get reused */
memset(io_request->LUN, 0x0, 8);
io_request->CDB.EEDP32.PrimaryReferenceTag = 0;
io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0;
io_request->EEDPFlags = 0;
io_request->Control = 0;
io_request->EEDPBlockSize = 0;
io_request->ChainOffset = 0;
io_request->RaidContext.raid_context.raid_flags = 0;
io_request->RaidContext.raid_context.type = 0;
io_request->RaidContext.raid_context.nseg = 0;
memcpy(io_request->CDB.CDB32, scp->cmnd, scp->cmd_len);
/*
* Just the CDB length,rest of the Flags are zero
* This will be modified for FP in build_ldio_fusion
*/
io_request->IoFlags = cpu_to_le16(scp->cmd_len);
switch (cmd_type = megasas_cmd_type(scp)) {
case READ_WRITE_LDIO:
megasas_build_ldio_fusion(instance, scp, cmd);
break;
case NON_READ_WRITE_LDIO:
megasas_build_ld_nonrw_fusion(instance, scp, cmd);
break;
case READ_WRITE_SYSPDIO:
megasas_build_syspd_fusion(instance, scp, cmd, true);
break;
case NON_READ_WRITE_SYSPDIO:
if (instance->secure_jbod_support ||
mr_device_priv_data->is_tm_capable)
megasas_build_syspd_fusion(instance, scp, cmd, false);
else
megasas_build_syspd_fusion(instance, scp, cmd, true);
break;
default:
break;
}
/*
* Construct SGL
*/
sge_count = megasas_make_sgl(instance, scp, cmd);
if (sge_count > instance->max_num_sge || (sge_count < 0)) {
dev_err(&instance->pdev->dev,
"%s %d sge_count (%d) is out of range. Range is: 0-%d\n",
__func__, __LINE__, sge_count, instance->max_num_sge);
return 1;
}
if (instance->adapter_type == VENTURA_SERIES) {
set_num_sge(&io_request->RaidContext.raid_context_g35, sge_count);
cpu_to_le16s(&io_request->RaidContext.raid_context_g35.routing_flags);
cpu_to_le16s(&io_request->RaidContext.raid_context_g35.nseg_type);
} else {
/* numSGE store lower 8 bit of sge_count.
* numSGEExt store higher 8 bit of sge_count
*/
io_request->RaidContext.raid_context.num_sge = sge_count;
io_request->RaidContext.raid_context.num_sge_ext =
(u8)(sge_count >> 8);
}
io_request->SGLFlags = cpu_to_le16(MPI2_SGE_FLAGS_64_BIT_ADDRESSING);
if (scp->sc_data_direction == DMA_TO_DEVICE)
io_request->Control |= cpu_to_le32(MPI2_SCSIIO_CONTROL_WRITE);
else if (scp->sc_data_direction == DMA_FROM_DEVICE)
io_request->Control |= cpu_to_le32(MPI2_SCSIIO_CONTROL_READ);
io_request->SGLOffset0 =
offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL) / 4;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
io_request->SenseBufferLowAddress =
cpu_to_le32(lower_32_bits(cmd->sense_phys_addr));
io_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
cmd->scmd = scp;
scp->SCp.ptr = (char *)cmd;
return 0;
}
static union MEGASAS_REQUEST_DESCRIPTOR_UNION *
megasas_get_request_descriptor(struct megasas_instance *instance, u16 index)
{
u8 *p;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
p = fusion->req_frames_desc +
sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) * index;
return (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)p;
}
/* megasas_prepate_secondRaid1_IO
* It prepares the raid 1 second IO
*/
void megasas_prepare_secondRaid1_IO(struct megasas_instance *instance,
struct megasas_cmd_fusion *cmd,
struct megasas_cmd_fusion *r1_cmd)
{
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc, *req_desc2 = NULL;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
req_desc = cmd->request_desc;
/* copy the io request frame as well as 8 SGEs data for r1 command*/
memcpy(r1_cmd->io_request, cmd->io_request,
(sizeof(struct MPI2_RAID_SCSI_IO_REQUEST)));
memcpy(&r1_cmd->io_request->SGL, &cmd->io_request->SGL,
(fusion->max_sge_in_main_msg * sizeof(union MPI2_SGE_IO_UNION)));
/*sense buffer is different for r1 command*/
r1_cmd->io_request->SenseBufferLowAddress =
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 17:49:05 +08:00
cpu_to_le32(lower_32_bits(r1_cmd->sense_phys_addr));
r1_cmd->scmd = cmd->scmd;
req_desc2 = megasas_get_request_descriptor(instance,
(r1_cmd->index - 1));
req_desc2->Words = 0;
r1_cmd->request_desc = req_desc2;
req_desc2->SCSIIO.SMID = cpu_to_le16(r1_cmd->index);
req_desc2->SCSIIO.RequestFlags = req_desc->SCSIIO.RequestFlags;
r1_cmd->request_desc->SCSIIO.DevHandle = cmd->r1_alt_dev_handle;
r1_cmd->io_request->DevHandle = cmd->r1_alt_dev_handle;
r1_cmd->r1_alt_dev_handle = cmd->io_request->DevHandle;
cmd->io_request->RaidContext.raid_context_g35.smid.peer_smid =
cpu_to_le16(r1_cmd->index);
r1_cmd->io_request->RaidContext.raid_context_g35.smid.peer_smid =
cpu_to_le16(cmd->index);
/*MSIxIndex of both commands request descriptors should be same*/
r1_cmd->request_desc->SCSIIO.MSIxIndex =
cmd->request_desc->SCSIIO.MSIxIndex;
/*span arm is different for r1 cmd*/
r1_cmd->io_request->RaidContext.raid_context_g35.span_arm =
cmd->io_request->RaidContext.raid_context_g35.span_arm + 1;
}
/**
* megasas_build_and_issue_cmd_fusion -Main routine for building and
* issuing non IOCTL cmd
* @instance: Adapter soft state
* @scmd: pointer to scsi cmd from OS
*/
static u32
megasas_build_and_issue_cmd_fusion(struct megasas_instance *instance,
struct scsi_cmnd *scmd)
{
struct megasas_cmd_fusion *cmd, *r1_cmd = NULL;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
u32 index;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
if ((megasas_cmd_type(scmd) == READ_WRITE_LDIO) &&
instance->ldio_threshold &&
(atomic_inc_return(&instance->ldio_outstanding) >
instance->ldio_threshold)) {
atomic_dec(&instance->ldio_outstanding);
return SCSI_MLQUEUE_DEVICE_BUSY;
}
if (atomic_inc_return(&instance->fw_outstanding) >
instance->host->can_queue) {
atomic_dec(&instance->fw_outstanding);
return SCSI_MLQUEUE_HOST_BUSY;
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
cmd = megasas_get_cmd_fusion(instance, scmd->request->tag);
if (!cmd) {
atomic_dec(&instance->fw_outstanding);
return SCSI_MLQUEUE_HOST_BUSY;
}
index = cmd->index;
req_desc = megasas_get_request_descriptor(instance, index-1);
req_desc->Words = 0;
cmd->request_desc = req_desc;
if (megasas_build_io_fusion(instance, scmd, cmd)) {
megasas_return_cmd_fusion(instance, cmd);
dev_err(&instance->pdev->dev, "Error building command\n");
cmd->request_desc = NULL;
atomic_dec(&instance->fw_outstanding);
return SCSI_MLQUEUE_HOST_BUSY;
}
req_desc = cmd->request_desc;
req_desc->SCSIIO.SMID = cpu_to_le16(index);
if (cmd->io_request->ChainOffset != 0 &&
cmd->io_request->ChainOffset != 0xF)
dev_err(&instance->pdev->dev, "The chain offset value is not "
"correct : %x\n", cmd->io_request->ChainOffset);
/*
* if it is raid 1/10 fp write capable.
* try to get second command from pool and construct it.
* From FW, it has confirmed that lba values of two PDs
* corresponds to single R1/10 LD are always same
*
*/
/* driver side count always should be less than max_fw_cmds
* to get new command
*/
if (cmd->r1_alt_dev_handle != MR_DEVHANDLE_INVALID) {
r1_cmd = megasas_get_cmd_fusion(instance,
(scmd->request->tag + instance->max_fw_cmds));
megasas_prepare_secondRaid1_IO(instance, cmd, r1_cmd);
}
/*
* Issue the command to the FW
*/
megasas_fire_cmd_fusion(instance, req_desc);
if (r1_cmd)
megasas_fire_cmd_fusion(instance, r1_cmd->request_desc);
return 0;
}
/**
* megasas_complete_r1_command -
* completes R1 FP write commands which has valid peer smid
* @instance: Adapter soft state
* @cmd_fusion: MPT command frame
*
*/
static inline void
megasas_complete_r1_command(struct megasas_instance *instance,
struct megasas_cmd_fusion *cmd)
{
u8 *sense, status, ex_status;
u32 data_length;
u16 peer_smid;
struct fusion_context *fusion;
struct megasas_cmd_fusion *r1_cmd = NULL;
struct scsi_cmnd *scmd_local = NULL;
struct RAID_CONTEXT_G35 *rctx_g35;
rctx_g35 = &cmd->io_request->RaidContext.raid_context_g35;
fusion = instance->ctrl_context;
peer_smid = le16_to_cpu(rctx_g35->smid.peer_smid);
r1_cmd = fusion->cmd_list[peer_smid - 1];
scmd_local = cmd->scmd;
status = rctx_g35->status;
ex_status = rctx_g35->ex_status;
data_length = cmd->io_request->DataLength;
sense = cmd->sense;
cmd->cmd_completed = true;
/* Check if peer command is completed or not*/
if (r1_cmd->cmd_completed) {
rctx_g35 = &r1_cmd->io_request->RaidContext.raid_context_g35;
if (rctx_g35->status != MFI_STAT_OK) {
status = rctx_g35->status;
ex_status = rctx_g35->ex_status;
data_length = r1_cmd->io_request->DataLength;
sense = r1_cmd->sense;
}
megasas_return_cmd_fusion(instance, r1_cmd);
map_cmd_status(fusion, scmd_local, status, ex_status,
le32_to_cpu(data_length), sense);
if (instance->ldio_threshold &&
megasas_cmd_type(scmd_local) == READ_WRITE_LDIO)
atomic_dec(&instance->ldio_outstanding);
scmd_local->SCp.ptr = NULL;
megasas_return_cmd_fusion(instance, cmd);
scsi_dma_unmap(scmd_local);
scmd_local->scsi_done(scmd_local);
}
}
/**
* complete_cmd_fusion - Completes command
* @instance: Adapter soft state
* Completes all commands that is in reply descriptor queue
*/
int
complete_cmd_fusion(struct megasas_instance *instance, u32 MSIxIndex)
{
union MPI2_REPLY_DESCRIPTORS_UNION *desc;
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc;
struct MPI2_RAID_SCSI_IO_REQUEST *scsi_io_req;
struct fusion_context *fusion;
struct megasas_cmd *cmd_mfi;
struct megasas_cmd_fusion *cmd_fusion;
u16 smid, num_completed;
u8 reply_descript_type, *sense, status, extStatus;
u32 device_id, data_length;
union desc_value d_val;
struct LD_LOAD_BALANCE_INFO *lbinfo;
int threshold_reply_count = 0;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
struct scsi_cmnd *scmd_local = NULL;
struct MR_TASK_MANAGE_REQUEST *mr_tm_req;
struct MPI2_SCSI_TASK_MANAGE_REQUEST *mpi_tm_req;
fusion = instance->ctrl_context;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
return IRQ_HANDLED;
desc = fusion->reply_frames_desc[MSIxIndex] +
fusion->last_reply_idx[MSIxIndex];
reply_desc = (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
d_val.word = desc->Words;
reply_descript_type = reply_desc->ReplyFlags &
MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
return IRQ_NONE;
num_completed = 0;
while (d_val.u.low != cpu_to_le32(UINT_MAX) &&
d_val.u.high != cpu_to_le32(UINT_MAX)) {
smid = le16_to_cpu(reply_desc->SMID);
cmd_fusion = fusion->cmd_list[smid - 1];
scsi_io_req = (struct MPI2_RAID_SCSI_IO_REQUEST *)
cmd_fusion->io_request;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
scmd_local = cmd_fusion->scmd;
status = scsi_io_req->RaidContext.raid_context.status;
extStatus = scsi_io_req->RaidContext.raid_context.ex_status;
sense = cmd_fusion->sense;
data_length = scsi_io_req->DataLength;
switch (scsi_io_req->Function) {
case MPI2_FUNCTION_SCSI_TASK_MGMT:
mr_tm_req = (struct MR_TASK_MANAGE_REQUEST *)
cmd_fusion->io_request;
mpi_tm_req = (struct MPI2_SCSI_TASK_MANAGE_REQUEST *)
&mr_tm_req->TmRequest;
dev_dbg(&instance->pdev->dev, "TM completion:"
"type: 0x%x TaskMID: 0x%x\n",
mpi_tm_req->TaskType, mpi_tm_req->TaskMID);
complete(&cmd_fusion->done);
break;
case MPI2_FUNCTION_SCSI_IO_REQUEST: /*Fast Path IO.*/
/* Update load balancing info */
if (fusion->load_balance_info &&
(cmd_fusion->scmd->SCp.Status &
MEGASAS_LOAD_BALANCE_FLAG)) {
device_id = MEGASAS_DEV_INDEX(scmd_local);
lbinfo = &fusion->load_balance_info[device_id];
atomic_dec(&lbinfo->scsi_pending_cmds[cmd_fusion->pd_r1_lb]);
cmd_fusion->scmd->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
}
//Fall thru and complete IO
case MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST: /* LD-IO Path */
atomic_dec(&instance->fw_outstanding);
if (cmd_fusion->r1_alt_dev_handle == MR_DEVHANDLE_INVALID) {
map_cmd_status(fusion, scmd_local, status,
extStatus, le32_to_cpu(data_length),
sense);
if (instance->ldio_threshold &&
(megasas_cmd_type(scmd_local) == READ_WRITE_LDIO))
atomic_dec(&instance->ldio_outstanding);
scmd_local->SCp.ptr = NULL;
megasas_return_cmd_fusion(instance, cmd_fusion);
scsi_dma_unmap(scmd_local);
scmd_local->scsi_done(scmd_local);
} else /* Optimal VD - R1 FP command completion. */
megasas_complete_r1_command(instance, cmd_fusion);
break;
case MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST: /*MFI command */
cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
/* Poll mode. Dummy free.
* In case of Interrupt mode, caller has reverse check.
*/
if (cmd_mfi->flags & DRV_DCMD_POLLED_MODE) {
cmd_mfi->flags &= ~DRV_DCMD_POLLED_MODE;
megasas_return_cmd(instance, cmd_mfi);
} else
megasas_complete_cmd(instance, cmd_mfi, DID_OK);
break;
}
fusion->last_reply_idx[MSIxIndex]++;
if (fusion->last_reply_idx[MSIxIndex] >=
fusion->reply_q_depth)
fusion->last_reply_idx[MSIxIndex] = 0;
desc->Words = cpu_to_le64(ULLONG_MAX);
num_completed++;
threshold_reply_count++;
/* Get the next reply descriptor */
if (!fusion->last_reply_idx[MSIxIndex])
desc = fusion->reply_frames_desc[MSIxIndex];
else
desc++;
reply_desc =
(struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
d_val.word = desc->Words;
reply_descript_type = reply_desc->ReplyFlags &
MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
break;
/*
* Write to reply post host index register after completing threshold
* number of reply counts and still there are more replies in reply queue
* pending to be completed
*/
if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) {
if (instance->msix_combined)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
else
writel((MSIxIndex << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[0]);
threshold_reply_count = 0;
}
}
if (!num_completed)
return IRQ_NONE;
wmb();
if (instance->msix_combined)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
else
writel((MSIxIndex << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[0]);
megasas_check_and_restore_queue_depth(instance);
return IRQ_HANDLED;
}
/**
* megasas_sync_irqs - Synchronizes all IRQs owned by adapter
* @instance: Adapter soft state
*/
void megasas_sync_irqs(unsigned long instance_addr)
{
u32 count, i;
struct megasas_instance *instance =
(struct megasas_instance *)instance_addr;
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
for (i = 0; i < count; i++)
synchronize_irq(pci_irq_vector(instance->pdev, i));
}
/**
* megasas_complete_cmd_dpc_fusion - Completes command
* @instance: Adapter soft state
*
* Tasklet to complete cmds
*/
void
megasas_complete_cmd_dpc_fusion(unsigned long instance_addr)
{
struct megasas_instance *instance =
(struct megasas_instance *)instance_addr;
unsigned long flags;
u32 count, MSIxIndex;
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
/* If we have already declared adapter dead, donot complete cmds */
spin_lock_irqsave(&instance->hba_lock, flags);
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
spin_unlock_irqrestore(&instance->hba_lock, flags);
return;
}
spin_unlock_irqrestore(&instance->hba_lock, flags);
for (MSIxIndex = 0 ; MSIxIndex < count; MSIxIndex++)
complete_cmd_fusion(instance, MSIxIndex);
}
/**
* megasas_isr_fusion - isr entry point
*/
irqreturn_t megasas_isr_fusion(int irq, void *devp)
{
struct megasas_irq_context *irq_context = devp;
struct megasas_instance *instance = irq_context->instance;
u32 mfiStatus;
if (instance->mask_interrupts)
return IRQ_NONE;
if (!instance->msix_vectors) {
mfiStatus = instance->instancet->clear_intr(instance->reg_set);
if (!mfiStatus)
return IRQ_NONE;
}
/* If we are resetting, bail */
if (test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags)) {
instance->instancet->clear_intr(instance->reg_set);
return IRQ_HANDLED;
}
return complete_cmd_fusion(instance, irq_context->MSIxIndex);
}
/**
* build_mpt_mfi_pass_thru - builds a cmd fo MFI Pass thru
* @instance: Adapter soft state
* mfi_cmd: megasas_cmd pointer
*
*/
void
build_mpt_mfi_pass_thru(struct megasas_instance *instance,
struct megasas_cmd *mfi_cmd)
{
struct MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain;
struct MPI2_RAID_SCSI_IO_REQUEST *io_req;
struct megasas_cmd_fusion *cmd;
struct fusion_context *fusion;
struct megasas_header *frame_hdr = &mfi_cmd->frame->hdr;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
fusion = instance->ctrl_context;
cmd = megasas_get_cmd_fusion(instance,
instance->max_scsi_cmds + mfi_cmd->index);
/* Save the smid. To be used for returning the cmd */
mfi_cmd->context.smid = cmd->index;
/*
* For cmds where the flag is set, store the flag and check
* on completion. For cmds with this flag, don't call
* megasas_complete_cmd
*/
if (frame_hdr->flags & cpu_to_le16(MFI_FRAME_DONT_POST_IN_REPLY_QUEUE))
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
mfi_cmd->flags |= DRV_DCMD_POLLED_MODE;
io_req = cmd->io_request;
if (instance->adapter_type >= INVADER_SERIES) {
struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr_end =
(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL;
sgl_ptr_end += fusion->max_sge_in_main_msg - 1;
sgl_ptr_end->Flags = 0;
}
mpi25_ieee_chain =
(struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain;
io_req->Function = MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST;
io_req->SGLOffset0 = offsetof(struct MPI2_RAID_SCSI_IO_REQUEST,
SGL) / 4;
io_req->ChainOffset = fusion->chain_offset_mfi_pthru;
mpi25_ieee_chain->Address = cpu_to_le64(mfi_cmd->frame_phys_addr);
mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
mpi25_ieee_chain->Length = cpu_to_le32(instance->mfi_frame_size);
}
/**
* build_mpt_cmd - Calls helper function to build a cmd MFI Pass thru cmd
* @instance: Adapter soft state
* @cmd: mfi cmd to build
*
*/
union MEGASAS_REQUEST_DESCRIPTOR_UNION *
build_mpt_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc = NULL;
u16 index;
build_mpt_mfi_pass_thru(instance, cmd);
index = cmd->context.smid;
req_desc = megasas_get_request_descriptor(instance, index - 1);
req_desc->Words = 0;
req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
req_desc->SCSIIO.SMID = cpu_to_le16(index);
return req_desc;
}
/**
* megasas_issue_dcmd_fusion - Issues a MFI Pass thru cmd
* @instance: Adapter soft state
* @cmd: mfi cmd pointer
*
*/
void
megasas_issue_dcmd_fusion(struct megasas_instance *instance,
struct megasas_cmd *cmd)
{
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
req_desc = build_mpt_cmd(instance, cmd);
megasas_fire_cmd_fusion(instance, req_desc);
return;
}
/**
* megasas_release_fusion - Reverses the FW initialization
* @instance: Adapter soft state
*/
void
megasas_release_fusion(struct megasas_instance *instance)
{
megasas_free_ioc_init_cmd(instance);
megasas_free_cmds(instance);
megasas_free_cmds_fusion(instance);
iounmap(instance->reg_set);
pci_release_selected_regions(instance->pdev, 1<<instance->bar);
}
/**
* megasas_read_fw_status_reg_fusion - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_fusion(struct megasas_register_set __iomem *regs)
{
return readl(&(regs)->outbound_scratch_pad);
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/**
* megasas_alloc_host_crash_buffer - Host buffers for Crash dump collection from Firmware
* @instance: Controller's soft instance
* return: Number of allocated host crash buffers
*/
static void
megasas_alloc_host_crash_buffer(struct megasas_instance *instance)
{
unsigned int i;
for (i = 0; i < MAX_CRASH_DUMP_SIZE; i++) {
instance->crash_buf[i] = vzalloc(CRASH_DMA_BUF_SIZE);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
if (!instance->crash_buf[i]) {
dev_info(&instance->pdev->dev, "Firmware crash dump "
"memory allocation failed at index %d\n", i);
break;
}
}
instance->drv_buf_alloc = i;
}
/**
* megasas_free_host_crash_buffer - Host buffers for Crash dump collection from Firmware
* @instance: Controller's soft instance
*/
void
megasas_free_host_crash_buffer(struct megasas_instance *instance)
{
unsigned int i;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
for (i = 0; i < instance->drv_buf_alloc; i++) {
if (instance->crash_buf[i])
vfree(instance->crash_buf[i]);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
}
instance->drv_buf_index = 0;
instance->drv_buf_alloc = 0;
instance->fw_crash_state = UNAVAILABLE;
instance->fw_crash_buffer_size = 0;
}
/**
* megasas_adp_reset_fusion - For controller reset
* @regs: MFI register set
*/
static int
megasas_adp_reset_fusion(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
u32 host_diag, abs_state, retry;
/* Now try to reset the chip */
writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_1ST_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_2ND_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_3RD_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_4TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_5TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
writel(MPI2_WRSEQ_6TH_KEY_VALUE, &instance->reg_set->fusion_seq_offset);
/* Check that the diag write enable (DRWE) bit is on */
host_diag = readl(&instance->reg_set->fusion_host_diag);
retry = 0;
while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
msleep(100);
host_diag = readl(&instance->reg_set->fusion_host_diag);
if (retry++ == 100) {
dev_warn(&instance->pdev->dev,
"Host diag unlock failed from %s %d\n",
__func__, __LINE__);
break;
}
}
if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
return -1;
/* Send chip reset command */
writel(host_diag | HOST_DIAG_RESET_ADAPTER,
&instance->reg_set->fusion_host_diag);
msleep(3000);
/* Make sure reset adapter bit is cleared */
host_diag = readl(&instance->reg_set->fusion_host_diag);
retry = 0;
while (host_diag & HOST_DIAG_RESET_ADAPTER) {
msleep(100);
host_diag = readl(&instance->reg_set->fusion_host_diag);
if (retry++ == 1000) {
dev_warn(&instance->pdev->dev,
"Diag reset adapter never cleared %s %d\n",
__func__, __LINE__);
break;
}
}
if (host_diag & HOST_DIAG_RESET_ADAPTER)
return -1;
abs_state = instance->instancet->read_fw_status_reg(instance->reg_set)
& MFI_STATE_MASK;
retry = 0;
while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) {
msleep(100);
abs_state = instance->instancet->
read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
}
if (abs_state <= MFI_STATE_FW_INIT) {
dev_warn(&instance->pdev->dev,
"fw state < MFI_STATE_FW_INIT, state = 0x%x %s %d\n",
abs_state, __func__, __LINE__);
return -1;
}
return 0;
}
/**
* megasas_check_reset_fusion - For controller reset check
* @regs: MFI register set
*/
static int
megasas_check_reset_fusion(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
return 0;
}
/**
* megasas_trigger_snap_dump - Trigger snap dump in FW
* @instance: Soft instance of adapter
*/
static inline void megasas_trigger_snap_dump(struct megasas_instance *instance)
{
int j;
u32 fw_state;
if (!instance->disableOnlineCtrlReset) {
dev_info(&instance->pdev->dev, "Trigger snap dump\n");
writel(MFI_ADP_TRIGGER_SNAP_DUMP,
&instance->reg_set->doorbell);
readl(&instance->reg_set->doorbell);
}
for (j = 0; j < instance->snapdump_wait_time; j++) {
fw_state = instance->instancet->read_fw_status_reg(
instance->reg_set) & MFI_STATE_MASK;
if (fw_state == MFI_STATE_FAULT) {
dev_err(&instance->pdev->dev,
"Found FW in FAULT state, after snap dump trigger\n");
return;
}
msleep(1000);
}
}
/* This function waits for outstanding commands on fusion to complete */
int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance,
int reason, int *convert)
{
int i, outstanding, retval = 0, hb_seconds_missed = 0;
u32 fw_state;
u32 waittime_for_io_completion;
waittime_for_io_completion =
min_t(u32, resetwaittime,
(resetwaittime - instance->snapdump_wait_time));
if (reason == MFI_IO_TIMEOUT_OCR) {
dev_info(&instance->pdev->dev,
"MFI command is timed out\n");
megasas_complete_cmd_dpc_fusion((unsigned long)instance);
if (instance->snapdump_wait_time)
megasas_trigger_snap_dump(instance);
retval = 1;
goto out;
}
for (i = 0; i < waittime_for_io_completion; i++) {
/* Check if firmware is in fault state */
fw_state = instance->instancet->read_fw_status_reg(
instance->reg_set) & MFI_STATE_MASK;
if (fw_state == MFI_STATE_FAULT) {
dev_warn(&instance->pdev->dev, "Found FW in FAULT state,"
" will reset adapter scsi%d.\n",
instance->host->host_no);
megasas_complete_cmd_dpc_fusion((unsigned long)instance);
if (instance->requestorId && reason) {
dev_warn(&instance->pdev->dev, "SR-IOV Found FW in FAULT"
" state while polling during"
" I/O timeout handling for %d\n",
instance->host->host_no);
*convert = 1;
}
retval = 1;
goto out;
}
/* If SR-IOV VF mode & heartbeat timeout, don't wait */
if (instance->requestorId && !reason) {
retval = 1;
goto out;
}
/* If SR-IOV VF mode & I/O timeout, check for HB timeout */
if (instance->requestorId && (reason == SCSIIO_TIMEOUT_OCR)) {
if (instance->hb_host_mem->HB.fwCounter !=
instance->hb_host_mem->HB.driverCounter) {
instance->hb_host_mem->HB.driverCounter =
instance->hb_host_mem->HB.fwCounter;
hb_seconds_missed = 0;
} else {
hb_seconds_missed++;
if (hb_seconds_missed ==
(MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF/HZ)) {
dev_warn(&instance->pdev->dev, "SR-IOV:"
" Heartbeat never completed "
" while polling during I/O "
" timeout handling for "
"scsi%d.\n",
instance->host->host_no);
*convert = 1;
retval = 1;
goto out;
}
}
}
megasas_complete_cmd_dpc_fusion((unsigned long)instance);
outstanding = atomic_read(&instance->fw_outstanding);
if (!outstanding)
goto out;
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
dev_notice(&instance->pdev->dev, "[%2d]waiting for %d "
"commands to complete for scsi%d\n", i,
outstanding, instance->host->host_no);
}
msleep(1000);
}
if (instance->snapdump_wait_time) {
megasas_trigger_snap_dump(instance);
retval = 1;
goto out;
}
if (atomic_read(&instance->fw_outstanding)) {
dev_err(&instance->pdev->dev, "pending commands remain after waiting, "
"will reset adapter scsi%d.\n",
instance->host->host_no);
*convert = 1;
retval = 1;
}
out:
return retval;
}
void megasas_reset_reply_desc(struct megasas_instance *instance)
{
int i, j, count;
struct fusion_context *fusion;
union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
fusion = instance->ctrl_context;
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
for (i = 0 ; i < count ; i++) {
fusion->last_reply_idx[i] = 0;
reply_desc = fusion->reply_frames_desc[i];
for (j = 0 ; j < fusion->reply_q_depth; j++, reply_desc++)
reply_desc->Words = cpu_to_le64(ULLONG_MAX);
}
}
/*
* megasas_refire_mgmt_cmd : Re-fire management commands
* @instance: Controller's soft instance
*/
void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
{
int j;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion;
struct megasas_cmd *cmd_mfi;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
u16 smid;
bool refire_cmd = 0;
u8 result;
u32 opcode = 0;
fusion = instance->ctrl_context;
/* Re-fire management commands.
* Do not traverse complet MPT frame pool. Start from max_scsi_cmds.
*/
for (j = instance->max_scsi_cmds ; j < instance->max_fw_cmds; j++) {
cmd_fusion = fusion->cmd_list[j];
cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
smid = le16_to_cpu(cmd_mfi->context.smid);
result = REFIRE_CMD;
if (!smid)
continue;
req_desc = megasas_get_request_descriptor(instance, smid - 1);
switch (cmd_mfi->frame->hdr.cmd) {
case MFI_CMD_DCMD:
opcode = le32_to_cpu(cmd_mfi->frame->dcmd.opcode);
/* Do not refire shutdown command */
if (opcode == MR_DCMD_CTRL_SHUTDOWN) {
cmd_mfi->frame->dcmd.cmd_status = MFI_STAT_OK;
result = COMPLETE_CMD;
break;
}
refire_cmd = ((opcode != MR_DCMD_LD_MAP_GET_INFO)) &&
(opcode != MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
!(cmd_mfi->flags & DRV_DCMD_SKIP_REFIRE);
if (!refire_cmd)
result = RETURN_CMD;
break;
case MFI_CMD_NVME:
if (!instance->support_nvme_passthru) {
cmd_mfi->frame->hdr.cmd_status = MFI_STAT_INVALID_CMD;
result = COMPLETE_CMD;
}
break;
default:
break;
}
switch (result) {
case REFIRE_CMD:
megasas_fire_cmd_fusion(instance, req_desc);
break;
case RETURN_CMD:
megasas_return_cmd(instance, cmd_mfi);
break;
case COMPLETE_CMD:
megasas_complete_cmd(instance, cmd_mfi, DID_OK);
break;
}
}
}
/*
* megasas_track_scsiio : Track SCSI IOs outstanding to a SCSI device
* @instance: per adapter struct
* @channel: the channel assigned by the OS
* @id: the id assigned by the OS
*
* Returns SUCCESS if no IOs pending to SCSI device, else return FAILED
*/
static int megasas_track_scsiio(struct megasas_instance *instance,
int id, int channel)
{
int i, found = 0;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
for (i = 0 ; i < instance->max_scsi_cmds; i++) {
cmd_fusion = fusion->cmd_list[i];
if (cmd_fusion->scmd &&
(cmd_fusion->scmd->device->id == id &&
cmd_fusion->scmd->device->channel == channel)) {
dev_info(&instance->pdev->dev,
"SCSI commands pending to target"
"channel %d id %d \tSMID: 0x%x\n",
channel, id, cmd_fusion->index);
scsi_print_command(cmd_fusion->scmd);
found = 1;
break;
}
}
return found ? FAILED : SUCCESS;
}
/**
* megasas_tm_response_code - translation of device response code
* @ioc: per adapter object
* @mpi_reply: MPI reply returned by firmware
*
* Return nothing.
*/
static void
megasas_tm_response_code(struct megasas_instance *instance,
struct MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply)
{
char *desc;
switch (mpi_reply->ResponseCode) {
case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
desc = "task management request completed";
break;
case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
desc = "invalid frame";
break;
case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
desc = "task management request not supported";
break;
case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
desc = "task management request failed";
break;
case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
desc = "task management request succeeded";
break;
case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
desc = "invalid lun";
break;
case 0xA:
desc = "overlapped tag attempted";
break;
case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
desc = "task queued, however not sent to target";
break;
default:
desc = "unknown";
break;
}
dev_dbg(&instance->pdev->dev, "response_code(%01x): %s\n",
mpi_reply->ResponseCode, desc);
dev_dbg(&instance->pdev->dev,
"TerminationCount/DevHandle/Function/TaskType/IOCStat/IOCLoginfo"
" 0x%x/0x%x/0x%x/0x%x/0x%x/0x%x\n",
mpi_reply->TerminationCount, mpi_reply->DevHandle,
mpi_reply->Function, mpi_reply->TaskType,
mpi_reply->IOCStatus, mpi_reply->IOCLogInfo);
}
/**
* megasas_issue_tm - main routine for sending tm requests
* @instance: per adapter struct
* @device_handle: device handle
* @channel: the channel assigned by the OS
* @id: the id assigned by the OS
* @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in megaraid_sas_fusion.c)
* @smid_task: smid assigned to the task
* @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
* Context: user
*
* MegaRaid use MPT interface for Task Magement request.
* A generic API for sending task management requests to firmware.
*
* Return SUCCESS or FAILED.
*/
static int
megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
uint channel, uint id, u16 smid_task, u8 type,
struct MR_PRIV_DEVICE *mr_device_priv_data)
{
struct MR_TASK_MANAGE_REQUEST *mr_request;
struct MPI2_SCSI_TASK_MANAGE_REQUEST *mpi_request;
unsigned long timeleft;
struct megasas_cmd_fusion *cmd_fusion;
struct megasas_cmd *cmd_mfi;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
struct fusion_context *fusion = NULL;
struct megasas_cmd_fusion *scsi_lookup;
int rc;
int timeout = MEGASAS_DEFAULT_TM_TIMEOUT;
struct MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply;
fusion = instance->ctrl_context;
cmd_mfi = megasas_get_cmd(instance);
if (!cmd_mfi) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return -ENOMEM;
}
cmd_fusion = megasas_get_cmd_fusion(instance,
instance->max_scsi_cmds + cmd_mfi->index);
/* Save the smid. To be used for returning the cmd */
cmd_mfi->context.smid = cmd_fusion->index;
req_desc = megasas_get_request_descriptor(instance,
(cmd_fusion->index - 1));
cmd_fusion->request_desc = req_desc;
req_desc->Words = 0;
mr_request = (struct MR_TASK_MANAGE_REQUEST *) cmd_fusion->io_request;
memset(mr_request, 0, sizeof(struct MR_TASK_MANAGE_REQUEST));
mpi_request = (struct MPI2_SCSI_TASK_MANAGE_REQUEST *) &mr_request->TmRequest;
mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
mpi_request->DevHandle = cpu_to_le16(device_handle);
mpi_request->TaskType = type;
mpi_request->TaskMID = cpu_to_le16(smid_task);
mpi_request->LUN[1] = 0;
req_desc = cmd_fusion->request_desc;
req_desc->HighPriority.SMID = cpu_to_le16(cmd_fusion->index);
req_desc->HighPriority.RequestFlags =
(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
req_desc->HighPriority.MSIxIndex = 0;
req_desc->HighPriority.LMID = 0;
req_desc->HighPriority.Reserved1 = 0;
if (channel < MEGASAS_MAX_PD_CHANNELS)
mr_request->tmReqFlags.isTMForPD = 1;
else
mr_request->tmReqFlags.isTMForLD = 1;
init_completion(&cmd_fusion->done);
megasas_fire_cmd_fusion(instance, req_desc);
switch (type) {
case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
timeout = mr_device_priv_data->task_abort_tmo;
break;
case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
timeout = mr_device_priv_data->target_reset_tmo;
break;
}
timeleft = wait_for_completion_timeout(&cmd_fusion->done, timeout * HZ);
if (!timeleft) {
dev_err(&instance->pdev->dev,
"task mgmt type 0x%x timed out\n", type);
cmd_mfi->flags |= DRV_DCMD_SKIP_REFIRE;
mutex_unlock(&instance->reset_mutex);
rc = megasas_reset_fusion(instance->host, MFI_IO_TIMEOUT_OCR);
mutex_lock(&instance->reset_mutex);
return rc;
}
mpi_reply = (struct MPI2_SCSI_TASK_MANAGE_REPLY *) &mr_request->TMReply;
megasas_tm_response_code(instance, mpi_reply);
megasas_return_cmd(instance, cmd_mfi);
rc = SUCCESS;
switch (type) {
case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
scsi_lookup = fusion->cmd_list[smid_task - 1];
if (scsi_lookup->scmd == NULL)
break;
else {
instance->instancet->disable_intr(instance);
megasas_sync_irqs((unsigned long)instance);
instance->instancet->enable_intr(instance);
if (scsi_lookup->scmd == NULL)
break;
}
rc = FAILED;
break;
case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
if ((channel == 0xFFFFFFFF) && (id == 0xFFFFFFFF))
break;
instance->instancet->disable_intr(instance);
megasas_sync_irqs((unsigned long)instance);
rc = megasas_track_scsiio(instance, id, channel);
instance->instancet->enable_intr(instance);
break;
case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
break;
default:
rc = FAILED;
break;
}
return rc;
}
/*
* megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
* @instance: per adapter struct
*
* Return Non Zero index, if SMID found in outstanding commands
*/
static u16 megasas_fusion_smid_lookup(struct scsi_cmnd *scmd)
{
int i, ret = 0;
struct megasas_instance *instance;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
fusion = instance->ctrl_context;
for (i = 0; i < instance->max_scsi_cmds; i++) {
cmd_fusion = fusion->cmd_list[i];
if (cmd_fusion->scmd && (cmd_fusion->scmd == scmd)) {
scmd_printk(KERN_NOTICE, scmd, "Abort request is for"
" SMID: %d\n", cmd_fusion->index);
ret = cmd_fusion->index;
break;
}
}
return ret;
}
/*
* megasas_get_tm_devhandle - Get devhandle for TM request
* @sdev- OS provided scsi device
*
* Returns- devhandle/targetID of SCSI device
*/
static u16 megasas_get_tm_devhandle(struct scsi_device *sdev)
{
u16 pd_index = 0;
u32 device_id;
struct megasas_instance *instance;
struct fusion_context *fusion;
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
u16 devhandle = (u16)ULONG_MAX;
instance = (struct megasas_instance *)sdev->host->hostdata;
fusion = instance->ctrl_context;
if (!MEGASAS_IS_LOGICAL(sdev)) {
if (instance->use_seqnum_jbod_fp) {
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL)
+ sdev->id;
pd_sync = (void *)fusion->pd_seq_sync
[(instance->pd_seq_map_id - 1) & 1];
devhandle = pd_sync->seq[pd_index].devHandle;
} else
sdev_printk(KERN_ERR, sdev, "Firmware expose tmCapable"
" without JBOD MAP support from %s %d\n", __func__, __LINE__);
} else {
device_id = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL)
+ sdev->id;
devhandle = device_id;
}
return devhandle;
}
/*
* megasas_task_abort_fusion : SCSI task abort function for fusion adapters
* @scmd : pointer to scsi command object
*
* Return SUCCESS, if command aborted else FAILED
*/
int megasas_task_abort_fusion(struct scsi_cmnd *scmd)
{
struct megasas_instance *instance;
u16 smid, devhandle;
struct fusion_context *fusion;
int ret;
struct MR_PRIV_DEVICE *mr_device_priv_data;
mr_device_priv_data = scmd->device->hostdata;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
fusion = instance->ctrl_context;
scmd_printk(KERN_INFO, scmd, "task abort called for scmd(%p)\n", scmd);
scsi_print_command(scmd);
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
dev_err(&instance->pdev->dev, "Controller is not OPERATIONAL,"
"SCSI host:%d\n", instance->host->host_no);
ret = FAILED;
return ret;
}
if (!mr_device_priv_data) {
sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
"scmd(%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
ret = SUCCESS;
goto out;
}
if (!mr_device_priv_data->is_tm_capable) {
ret = FAILED;
goto out;
}
mutex_lock(&instance->reset_mutex);
smid = megasas_fusion_smid_lookup(scmd);
if (!smid) {
ret = SUCCESS;
scmd_printk(KERN_NOTICE, scmd, "Command for which abort is"
" issued is not found in oustanding commands\n");
mutex_unlock(&instance->reset_mutex);
goto out;
}
devhandle = megasas_get_tm_devhandle(scmd->device);
if (devhandle == (u16)ULONG_MAX) {
ret = SUCCESS;
sdev_printk(KERN_INFO, scmd->device,
"task abort issued for invalid devhandle\n");
mutex_unlock(&instance->reset_mutex);
goto out;
}
sdev_printk(KERN_INFO, scmd->device,
"attempting task abort! scmd(%p) tm_dev_handle 0x%x\n",
scmd, devhandle);
mr_device_priv_data->tm_busy = 1;
ret = megasas_issue_tm(instance, devhandle,
scmd->device->channel, scmd->device->id, smid,
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
mr_device_priv_data);
mr_device_priv_data->tm_busy = 0;
mutex_unlock(&instance->reset_mutex);
out:
sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
((ret == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
return ret;
}
/*
* megasas_reset_target_fusion : target reset function for fusion adapters
* scmd: SCSI command pointer
*
* Returns SUCCESS if all commands associated with target aborted else FAILED
*/
int megasas_reset_target_fusion(struct scsi_cmnd *scmd)
{
struct megasas_instance *instance;
int ret = FAILED;
u16 devhandle;
struct fusion_context *fusion;
struct MR_PRIV_DEVICE *mr_device_priv_data;
mr_device_priv_data = scmd->device->hostdata;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
fusion = instance->ctrl_context;
sdev_printk(KERN_INFO, scmd->device,
"target reset called for scmd(%p)\n", scmd);
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
dev_err(&instance->pdev->dev, "Controller is not OPERATIONAL,"
"SCSI host:%d\n", instance->host->host_no);
ret = FAILED;
return ret;
}
if (!mr_device_priv_data) {
sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
"scmd(%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
ret = SUCCESS;
goto out;
}
if (!mr_device_priv_data->is_tm_capable) {
ret = FAILED;
goto out;
}
mutex_lock(&instance->reset_mutex);
devhandle = megasas_get_tm_devhandle(scmd->device);
if (devhandle == (u16)ULONG_MAX) {
ret = SUCCESS;
sdev_printk(KERN_INFO, scmd->device,
"target reset issued for invalid devhandle\n");
mutex_unlock(&instance->reset_mutex);
goto out;
}
sdev_printk(KERN_INFO, scmd->device,
"attempting target reset! scmd(%p) tm_dev_handle 0x%x\n",
scmd, devhandle);
mr_device_priv_data->tm_busy = 1;
ret = megasas_issue_tm(instance, devhandle,
scmd->device->channel, scmd->device->id, 0,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
mr_device_priv_data);
mr_device_priv_data->tm_busy = 0;
mutex_unlock(&instance->reset_mutex);
out:
scmd_printk(KERN_NOTICE, scmd, "megasas: target reset %s!!\n",
(ret == SUCCESS) ? "SUCCESS" : "FAILED");
return ret;
}
/*SRIOV get other instance in cluster if any*/
struct megasas_instance *megasas_get_peer_instance(struct megasas_instance *instance)
{
int i;
for (i = 0; i < MAX_MGMT_ADAPTERS; i++) {
if (megasas_mgmt_info.instance[i] &&
(megasas_mgmt_info.instance[i] != instance) &&
megasas_mgmt_info.instance[i]->requestorId &&
megasas_mgmt_info.instance[i]->peerIsPresent &&
(memcmp((megasas_mgmt_info.instance[i]->clusterId),
instance->clusterId, MEGASAS_CLUSTER_ID_SIZE) == 0))
return megasas_mgmt_info.instance[i];
}
return NULL;
}
/* Check for a second path that is currently UP */
int megasas_check_mpio_paths(struct megasas_instance *instance,
struct scsi_cmnd *scmd)
{
struct megasas_instance *peer_instance = NULL;
int retval = (DID_REQUEUE << 16);
if (instance->peerIsPresent) {
peer_instance = megasas_get_peer_instance(instance);
if ((peer_instance) &&
(atomic_read(&peer_instance->adprecovery) ==
MEGASAS_HBA_OPERATIONAL))
retval = (DID_NO_CONNECT << 16);
}
return retval;
}
/* Core fusion reset function */
int megasas_reset_fusion(struct Scsi_Host *shost, int reason)
{
int retval = SUCCESS, i, j, convert = 0;
struct megasas_instance *instance;
struct megasas_cmd_fusion *cmd_fusion, *r1_cmd;
struct fusion_context *fusion;
u32 abs_state, status_reg, reset_adapter;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
u32 io_timeout_in_crash_mode = 0;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
struct scsi_cmnd *scmd_local = NULL;
struct scsi_device *sdev;
int ret_target_prop = DCMD_FAILED;
bool is_target_prop = false;
instance = (struct megasas_instance *)shost->hostdata;
fusion = instance->ctrl_context;
mutex_lock(&instance->reset_mutex);
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_warn(&instance->pdev->dev, "Hardware critical error, "
"returning FAILED for scsi%d.\n",
instance->host->host_no);
mutex_unlock(&instance->reset_mutex);
return FAILED;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
status_reg = instance->instancet->read_fw_status_reg(instance->reg_set);
abs_state = status_reg & MFI_STATE_MASK;
/* IO timeout detected, forcibly put FW in FAULT state */
if (abs_state != MFI_STATE_FAULT && instance->crash_dump_buf &&
instance->crash_dump_app_support && reason) {
dev_info(&instance->pdev->dev, "IO/DCMD timeout is detected, "
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
"forcibly FAULT Firmware\n");
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
status_reg = readl(&instance->reg_set->doorbell);
writel(status_reg | MFI_STATE_FORCE_OCR,
&instance->reg_set->doorbell);
readl(&instance->reg_set->doorbell);
mutex_unlock(&instance->reset_mutex);
do {
ssleep(3);
io_timeout_in_crash_mode++;
dev_dbg(&instance->pdev->dev, "waiting for [%d] "
"seconds for crash dump collection and OCR "
"to be done\n", (io_timeout_in_crash_mode * 3));
} while ((atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) &&
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
(io_timeout_in_crash_mode < 80));
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL) {
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
dev_info(&instance->pdev->dev, "OCR done for IO "
"timeout case\n");
retval = SUCCESS;
} else {
dev_info(&instance->pdev->dev, "Controller is not "
"operational after 240 seconds wait for IO "
"timeout case in FW crash dump mode\n do "
"OCR/kill adapter\n");
retval = megasas_reset_fusion(shost, 0);
}
return retval;
}
if (instance->requestorId && !instance->skip_heartbeat_timer_del)
del_timer_sync(&instance->sriov_heartbeat_timer);
set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_POLLING);
instance->instancet->disable_intr(instance);
megasas_sync_irqs((unsigned long)instance);
/* First try waiting for commands to complete */
if (megasas_wait_for_outstanding_fusion(instance, reason,
&convert)) {
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
dev_warn(&instance->pdev->dev, "resetting fusion "
"adapter scsi%d.\n", instance->host->host_no);
if (convert)
reason = 0;
if (megasas_dbg_lvl & OCR_LOGS)
dev_info(&instance->pdev->dev, "\nPending SCSI commands:\n");
/* Now return commands back to the OS */
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
for (i = 0 ; i < instance->max_scsi_cmds; i++) {
cmd_fusion = fusion->cmd_list[i];
/*check for extra commands issued by driver*/
if (instance->adapter_type == VENTURA_SERIES) {
r1_cmd = fusion->cmd_list[i + instance->max_fw_cmds];
megasas_return_cmd_fusion(instance, r1_cmd);
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
scmd_local = cmd_fusion->scmd;
if (cmd_fusion->scmd) {
if (megasas_dbg_lvl & OCR_LOGS) {
sdev_printk(KERN_INFO,
cmd_fusion->scmd->device, "SMID: 0x%x\n",
cmd_fusion->index);
scsi_print_command(cmd_fusion->scmd);
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
scmd_local->result =
megasas_check_mpio_paths(instance,
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
scmd_local);
if (instance->ldio_threshold &&
megasas_cmd_type(scmd_local) == READ_WRITE_LDIO)
atomic_dec(&instance->ldio_outstanding);
megasas_return_cmd_fusion(instance, cmd_fusion);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
scsi_dma_unmap(scmd_local);
scmd_local->scsi_done(scmd_local);
}
}
atomic_set(&instance->fw_outstanding, 0);
status_reg = instance->instancet->read_fw_status_reg(
instance->reg_set);
abs_state = status_reg & MFI_STATE_MASK;
reset_adapter = status_reg & MFI_RESET_ADAPTER;
if (instance->disableOnlineCtrlReset ||
(abs_state == MFI_STATE_FAULT && !reset_adapter)) {
/* Reset not supported, kill adapter */
dev_warn(&instance->pdev->dev, "Reset not supported"
", killing adapter scsi%d.\n",
instance->host->host_no);
megaraid_sas_kill_hba(instance);
instance->skip_heartbeat_timer_del = 1;
retval = FAILED;
goto out;
}
/* Let SR-IOV VF & PF sync up if there was a HB failure */
if (instance->requestorId && !reason) {
msleep(MEGASAS_OCR_SETTLE_TIME_VF);
goto transition_to_ready;
}
/* Now try to reset the chip */
for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) {
if (instance->instancet->adp_reset
(instance, instance->reg_set))
continue;
transition_to_ready:
/* Wait for FW to become ready */
if (megasas_transition_to_ready(instance, 1)) {
dev_warn(&instance->pdev->dev,
"Failed to transition controller to ready for "
"scsi%d.\n", instance->host->host_no);
if (instance->requestorId && !reason)
goto fail_kill_adapter;
else
continue;
}
megasas_reset_reply_desc(instance);
megasas_fusion_update_can_queue(instance, OCR_CONTEXT);
if (megasas_ioc_init_fusion(instance)) {
if (instance->requestorId && !reason)
goto fail_kill_adapter;
else
continue;
}
if (megasas_get_ctrl_info(instance)) {
dev_info(&instance->pdev->dev,
"Failed from %s %d\n",
__func__, __LINE__);
megaraid_sas_kill_hba(instance);
retval = FAILED;
goto out;
}
megasas_refire_mgmt_cmd(instance);
/* Reset load balance info */
if (fusion->load_balance_info)
memset(fusion->load_balance_info, 0,
(sizeof(struct LD_LOAD_BALANCE_INFO) *
MAX_LOGICAL_DRIVES_EXT));
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
megasas_setup_jbod_map(instance);
/* reset stream detection array */
if (instance->adapter_type == VENTURA_SERIES) {
for (j = 0; j < MAX_LOGICAL_DRIVES_EXT; ++j) {
memset(fusion->stream_detect_by_ld[j],
0, sizeof(struct LD_STREAM_DETECT));
fusion->stream_detect_by_ld[j]->mru_bit_map
= MR_STREAM_BITMAP;
}
}
clear_bit(MEGASAS_FUSION_IN_RESET,
&instance->reset_flags);
instance->instancet->enable_intr(instance);
shost_for_each_device(sdev, shost) {
if ((instance->tgt_prop) &&
(instance->nvme_page_size))
ret_target_prop = megasas_get_target_prop(instance, sdev);
is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
megasas_set_dynamic_target_properties(sdev, is_target_prop);
}
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
dev_info(&instance->pdev->dev, "Interrupts are enabled and"
" controller is OPERATIONAL for scsi:%d\n",
instance->host->host_no);
/* Restart SR-IOV heartbeat */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 0))
megasas_start_timer(instance);
else
instance->skip_heartbeat_timer_del = 1;
}
if (instance->crash_dump_drv_support &&
instance->crash_dump_app_support)
megasas_set_crash_dump_params(instance,
MR_CRASH_BUF_TURN_ON);
else
megasas_set_crash_dump_params(instance,
MR_CRASH_BUF_TURN_OFF);
if (instance->snapdump_wait_time) {
megasas_get_snapdump_properties(instance);
dev_info(&instance->pdev->dev,
"Snap dump wait time\t: %d\n",
instance->snapdump_wait_time);
}
retval = SUCCESS;
/* Adapter reset completed successfully */
dev_warn(&instance->pdev->dev,
"Reset successful for scsi%d.\n",
instance->host->host_no);
goto out;
}
fail_kill_adapter:
/* Reset failed, kill the adapter */
dev_warn(&instance->pdev->dev, "Reset failed, killing "
"adapter scsi%d.\n", instance->host->host_no);
megaraid_sas_kill_hba(instance);
instance->skip_heartbeat_timer_del = 1;
retval = FAILED;
} else {
/* For VF: Restart HB timer if we didn't OCR */
if (instance->requestorId) {
megasas_start_timer(instance);
}
clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
instance->instancet->enable_intr(instance);
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
}
out:
clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
mutex_unlock(&instance->reset_mutex);
return retval;
}
/* Fusion Crash dump collection */
void megasas_fusion_crash_dump(struct megasas_instance *instance)
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
{
u32 status_reg;
u8 partial_copy = 0;
int wait = 0;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
status_reg = instance->instancet->read_fw_status_reg(instance->reg_set);
/*
* Allocate host crash buffers to copy data from 1 MB DMA crash buffer
* to host crash buffers
*/
if (instance->drv_buf_index == 0) {
/* Buffer is already allocated for old Crash dump.
* Do OCR and do not wait for crash dump collection
*/
if (instance->drv_buf_alloc) {
dev_info(&instance->pdev->dev, "earlier crash dump is "
"not yet copied by application, ignoring this "
"crash dump and initiating OCR\n");
status_reg |= MFI_STATE_CRASH_DUMP_DONE;
writel(status_reg,
&instance->reg_set->outbound_scratch_pad);
readl(&instance->reg_set->outbound_scratch_pad);
return;
}
megasas_alloc_host_crash_buffer(instance);
dev_info(&instance->pdev->dev, "Number of host crash buffers "
"allocated: %d\n", instance->drv_buf_alloc);
}
while (!(status_reg & MFI_STATE_CRASH_DUMP_DONE) &&
(wait < MEGASAS_WATCHDOG_WAIT_COUNT)) {
if (!(status_reg & MFI_STATE_DMADONE)) {
/*
* Next crash dump buffer is not yet DMA'd by FW
* Check after 10ms. Wait for 1 second for FW to
* post the next buffer. If not bail out.
*/
wait++;
msleep(MEGASAS_WAIT_FOR_NEXT_DMA_MSECS);
status_reg = instance->instancet->read_fw_status_reg(
instance->reg_set);
continue;
}
wait = 0;
if (instance->drv_buf_index >= instance->drv_buf_alloc) {
dev_info(&instance->pdev->dev,
"Driver is done copying the buffer: %d\n",
instance->drv_buf_alloc);
status_reg |= MFI_STATE_CRASH_DUMP_DONE;
partial_copy = 1;
break;
} else {
memcpy(instance->crash_buf[instance->drv_buf_index],
instance->crash_dump_buf, CRASH_DMA_BUF_SIZE);
instance->drv_buf_index++;
status_reg &= ~MFI_STATE_DMADONE;
}
writel(status_reg, &instance->reg_set->outbound_scratch_pad);
readl(&instance->reg_set->outbound_scratch_pad);
msleep(MEGASAS_WAIT_FOR_NEXT_DMA_MSECS);
status_reg = instance->instancet->read_fw_status_reg(
instance->reg_set);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
}
if (status_reg & MFI_STATE_CRASH_DUMP_DONE) {
dev_info(&instance->pdev->dev, "Crash Dump is available,number "
"of copied buffers: %d\n", instance->drv_buf_index);
instance->fw_crash_buffer_size = instance->drv_buf_index;
instance->fw_crash_state = AVAILABLE;
instance->drv_buf_index = 0;
writel(status_reg, &instance->reg_set->outbound_scratch_pad);
readl(&instance->reg_set->outbound_scratch_pad);
if (!partial_copy)
megasas_reset_fusion(instance->host, 0);
}
}
/* Fusion OCR work queue */
void megasas_fusion_ocr_wq(struct work_struct *work)
{
struct megasas_instance *instance =
container_of(work, struct megasas_instance, work_init);
megasas_reset_fusion(instance->host, 0);
}
/* Allocate fusion context */
int
megasas_alloc_fusion_context(struct megasas_instance *instance)
{
struct fusion_context *fusion;
instance->ctrl_context = kzalloc(sizeof(struct fusion_context),
GFP_KERNEL);
if (!instance->ctrl_context) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return -ENOMEM;
}
fusion = instance->ctrl_context;
fusion->log_to_span_pages = get_order(MAX_LOGICAL_DRIVES_EXT *
sizeof(LD_SPAN_INFO));
fusion->log_to_span =
(PLD_SPAN_INFO)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
fusion->log_to_span_pages);
if (!fusion->log_to_span) {
treewide: Use array_size() in vzalloc() The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:27:37 +08:00
fusion->log_to_span =
vzalloc(array_size(MAX_LOGICAL_DRIVES_EXT,
sizeof(LD_SPAN_INFO)));
if (!fusion->log_to_span) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return -ENOMEM;
}
}
fusion->load_balance_info_pages = get_order(MAX_LOGICAL_DRIVES_EXT *
sizeof(struct LD_LOAD_BALANCE_INFO));
fusion->load_balance_info =
(struct LD_LOAD_BALANCE_INFO *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
fusion->load_balance_info_pages);
if (!fusion->load_balance_info) {
treewide: Use array_size() in vzalloc() The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:27:37 +08:00
fusion->load_balance_info =
vzalloc(array_size(MAX_LOGICAL_DRIVES_EXT,
sizeof(struct LD_LOAD_BALANCE_INFO)));
if (!fusion->load_balance_info)
dev_err(&instance->pdev->dev, "Failed to allocate load_balance_info, "
"continuing without Load Balance support\n");
}
return 0;
}
void
megasas_free_fusion_context(struct megasas_instance *instance)
{
struct fusion_context *fusion = instance->ctrl_context;
if (fusion) {
if (fusion->load_balance_info) {
if (is_vmalloc_addr(fusion->load_balance_info))
vfree(fusion->load_balance_info);
else
free_pages((ulong)fusion->load_balance_info,
fusion->load_balance_info_pages);
}
if (fusion->log_to_span) {
if (is_vmalloc_addr(fusion->log_to_span))
vfree(fusion->log_to_span);
else
free_pages((ulong)fusion->log_to_span,
fusion->log_to_span_pages);
}
kfree(fusion);
}
}
struct megasas_instance_template megasas_instance_template_fusion = {
.enable_intr = megasas_enable_intr_fusion,
.disable_intr = megasas_disable_intr_fusion,
.clear_intr = megasas_clear_intr_fusion,
.read_fw_status_reg = megasas_read_fw_status_reg_fusion,
.adp_reset = megasas_adp_reset_fusion,
.check_reset = megasas_check_reset_fusion,
.service_isr = megasas_isr_fusion,
.tasklet = megasas_complete_cmd_dpc_fusion,
.init_adapter = megasas_init_adapter_fusion,
.build_and_issue_cmd = megasas_build_and_issue_cmd_fusion,
.issue_dcmd = megasas_issue_dcmd_fusion,
};