OpenCloudOS-Kernel/include/linux/pmem.h

143 lines
3.8 KiB
C
Raw Normal View History

/*
* Copyright(c) 2015 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __PMEM_H__
#define __PMEM_H__
#include <linux/io.h>
#include <linux/uio.h>
#ifdef CONFIG_ARCH_HAS_PMEM_API
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB Given that a write-back (WB) mapping plus non-temporal stores is expected to be the most efficient way to access PMEM, update the definition of ARCH_HAS_PMEM_API to imply arch support for WB-mapped-PMEM. This is needed as a pre-requisite for adding PMEM to the direct map and mapping it with struct page. The above clarification for X86_64 means that memcpy_to_pmem() is permitted to use the non-temporal arch_memcpy_to_pmem() rather than needlessly fall back to default_memcpy_to_pmem() when the pcommit instruction is not available. When arch_memcpy_to_pmem() is not guaranteed to flush writes out of cache, i.e. on older X86_32 implementations where non-temporal stores may just dirty cache, ARCH_HAS_PMEM_API is simply disabled. The default fall back for persistent memory handling remains. Namely, map it with the WT (write-through) cache-type and hope for the best. arch_has_pmem_api() is updated to only indicate whether the arch provides the proper helpers to meet the minimum "writes are visible outside the cache hierarchy after memcpy_to_pmem() + wmb_pmem()". Code that cares whether wmb_pmem() actually flushes writes to pmem must now call arch_has_wmb_pmem() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> [hch: set ARCH_HAS_PMEM_API=n on x86_32] Reviewed-by: Christoph Hellwig <hch@lst.de> [toshi: x86_32 compile fixes] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-25 06:29:38 +08:00
#define ARCH_MEMREMAP_PMEM MEMREMAP_WB
#include <asm/pmem.h>
#else
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB Given that a write-back (WB) mapping plus non-temporal stores is expected to be the most efficient way to access PMEM, update the definition of ARCH_HAS_PMEM_API to imply arch support for WB-mapped-PMEM. This is needed as a pre-requisite for adding PMEM to the direct map and mapping it with struct page. The above clarification for X86_64 means that memcpy_to_pmem() is permitted to use the non-temporal arch_memcpy_to_pmem() rather than needlessly fall back to default_memcpy_to_pmem() when the pcommit instruction is not available. When arch_memcpy_to_pmem() is not guaranteed to flush writes out of cache, i.e. on older X86_32 implementations where non-temporal stores may just dirty cache, ARCH_HAS_PMEM_API is simply disabled. The default fall back for persistent memory handling remains. Namely, map it with the WT (write-through) cache-type and hope for the best. arch_has_pmem_api() is updated to only indicate whether the arch provides the proper helpers to meet the minimum "writes are visible outside the cache hierarchy after memcpy_to_pmem() + wmb_pmem()". Code that cares whether wmb_pmem() actually flushes writes to pmem must now call arch_has_wmb_pmem() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> [hch: set ARCH_HAS_PMEM_API=n on x86_32] Reviewed-by: Christoph Hellwig <hch@lst.de> [toshi: x86_32 compile fixes] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-25 06:29:38 +08:00
#define ARCH_MEMREMAP_PMEM MEMREMAP_WT
/*
* These are simply here to enable compilation, all call sites gate
* calling these symbols with arch_has_pmem_api() and redirect to the
* implementation in asm/pmem.h.
*/
static inline void arch_memcpy_to_pmem(void *dst, const void *src, size_t n)
{
BUG();
}
static inline size_t arch_copy_from_iter_pmem(void *addr, size_t bytes,
struct iov_iter *i)
{
BUG();
return 0;
}
static inline void arch_clear_pmem(void *addr, size_t size)
{
BUG();
}
static inline void arch_wb_cache_pmem(void *addr, size_t size)
{
BUG();
}
static inline void arch_invalidate_pmem(void *addr, size_t size)
{
BUG();
}
#endif
static inline bool arch_has_pmem_api(void)
{
return IS_ENABLED(CONFIG_ARCH_HAS_PMEM_API);
}
/**
* memcpy_to_pmem - copy data to persistent memory
* @dst: destination buffer for the copy
* @src: source buffer for the copy
* @n: length of the copy in bytes
*
* Perform a memory copy that results in the destination of the copy
* being effectively evicted from, or never written to, the processor
* cache hierarchy after the copy completes. After memcpy_to_pmem()
* data may still reside in cpu or platform buffers, so this operation
* must be followed by a blkdev_issue_flush() on the pmem block device.
*/
static inline void memcpy_to_pmem(void *dst, const void *src, size_t n)
{
if (arch_has_pmem_api())
arch_memcpy_to_pmem(dst, src, n);
else
memcpy(dst, src, n);
}
/**
* copy_from_iter_pmem - copy data from an iterator to PMEM
* @addr: PMEM destination address
* @bytes: number of bytes to copy
* @i: iterator with source data
*
* Copy data from the iterator 'i' to the PMEM buffer starting at 'addr'.
* See blkdev_issue_flush() note for memcpy_to_pmem().
*/
static inline size_t copy_from_iter_pmem(void *addr, size_t bytes,
struct iov_iter *i)
{
if (arch_has_pmem_api())
return arch_copy_from_iter_pmem(addr, bytes, i);
return copy_from_iter_nocache(addr, bytes, i);
}
/**
* clear_pmem - zero a PMEM memory range
* @addr: virtual start address
* @size: number of bytes to zero
*
* Write zeros into the memory range starting at 'addr' for 'size' bytes.
* See blkdev_issue_flush() note for memcpy_to_pmem().
*/
static inline void clear_pmem(void *addr, size_t size)
{
if (arch_has_pmem_api())
arch_clear_pmem(addr, size);
else
memset(addr, 0, size);
}
/**
* invalidate_pmem - flush a pmem range from the cache hierarchy
* @addr: virtual start address
* @size: bytes to invalidate (internally aligned to cache line size)
*
* For platforms that support clearing poison this flushes any poisoned
* ranges out of the cache
*/
static inline void invalidate_pmem(void *addr, size_t size)
{
if (arch_has_pmem_api())
arch_invalidate_pmem(addr, size);
}
/**
* wb_cache_pmem - write back processor cache for PMEM memory range
* @addr: virtual start address
* @size: number of bytes to write back
*
* Write back the processor cache range starting at 'addr' for 'size' bytes.
* See blkdev_issue_flush() note for memcpy_to_pmem().
*/
static inline void wb_cache_pmem(void *addr, size_t size)
{
if (arch_has_pmem_api())
arch_wb_cache_pmem(addr, size);
}
#endif /* __PMEM_H__ */