OpenCloudOS-Kernel/drivers/firmware/arm_scmi/optee.c

644 lines
16 KiB
C
Raw Normal View History

firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019-2021 Linaro Ltd.
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/tee_drv.h>
#include <linux/uuid.h>
#include <uapi/linux/tee.h>
#include "common.h"
#define SCMI_OPTEE_MAX_MSG_SIZE 128
enum scmi_optee_pta_cmd {
/*
* PTA_SCMI_CMD_CAPABILITIES - Get channel capabilities
*
* [out] value[0].a: Capability bit mask (enum pta_scmi_caps)
* [out] value[0].b: Extended capabilities or 0
*/
PTA_SCMI_CMD_CAPABILITIES = 0,
/*
* PTA_SCMI_CMD_PROCESS_SMT_CHANNEL - Process SCMI message in SMT buffer
*
* [in] value[0].a: Channel handle
*
* Shared memory used for SCMI message/response exhange is expected
* already identified and bound to channel handle in both SCMI agent
* and SCMI server (OP-TEE) parts.
* The memory uses SMT header to carry SCMI meta-data (protocol ID and
* protocol message ID).
*/
PTA_SCMI_CMD_PROCESS_SMT_CHANNEL = 1,
/*
* PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE - Process SMT/SCMI message
*
* [in] value[0].a: Channel handle
* [in/out] memref[1]: Message/response buffer (SMT and SCMI payload)
*
* Shared memory used for SCMI message/response is a SMT buffer
* referenced by param[1]. It shall be 128 bytes large to fit response
* payload whatever message playload size.
* The memory uses SMT header to carry SCMI meta-data (protocol ID and
* protocol message ID).
*/
PTA_SCMI_CMD_PROCESS_SMT_CHANNEL_MESSAGE = 2,
/*
* PTA_SCMI_CMD_GET_CHANNEL - Get channel handle
*
* SCMI shm information are 0 if agent expects to use OP-TEE regular SHM
*
* [in] value[0].a: Channel identifier
* [out] value[0].a: Returned channel handle
* [in] value[0].b: Requested capabilities mask (enum pta_scmi_caps)
*/
PTA_SCMI_CMD_GET_CHANNEL = 3,
/*
* PTA_SCMI_CMD_PROCESS_MSG_CHANNEL - Process SCMI message in a MSG
* buffer pointed by memref parameters
*
* [in] value[0].a: Channel handle
* [in] memref[1]: Message buffer (MSG and SCMI payload)
* [out] memref[2]: Response buffer (MSG and SCMI payload)
*
* Shared memories used for SCMI message/response are MSG buffers
* referenced by param[1] and param[2]. MSG transport protocol
* uses a 32bit header to carry SCMI meta-data (protocol ID and
* protocol message ID) followed by the effective SCMI message
* payload.
*/
PTA_SCMI_CMD_PROCESS_MSG_CHANNEL = 4,
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
};
/*
* OP-TEE SCMI service capabilities bit flags (32bit)
*
* PTA_SCMI_CAPS_SMT_HEADER
* When set, OP-TEE supports command using SMT header protocol (SCMI shmem) in
* shared memory buffers to carry SCMI protocol synchronisation information.
*
* PTA_SCMI_CAPS_MSG_HEADER
* When set, OP-TEE supports command using MSG header protocol in an OP-TEE
* shared memory to carry SCMI protocol synchronisation information and SCMI
* message payload.
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
*/
#define PTA_SCMI_CAPS_NONE 0
#define PTA_SCMI_CAPS_SMT_HEADER BIT(0)
#define PTA_SCMI_CAPS_MSG_HEADER BIT(1)
#define PTA_SCMI_CAPS_MASK (PTA_SCMI_CAPS_SMT_HEADER | \
PTA_SCMI_CAPS_MSG_HEADER)
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
/**
* struct scmi_optee_channel - Description of an OP-TEE SCMI channel
*
* @channel_id: OP-TEE channel ID used for this transport
* @tee_session: TEE session identifier
* @caps: OP-TEE SCMI channel capabilities
* @rx_len: Response size
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
* @mu: Mutex protection on channel access
* @cinfo: SCMI channel information
* @shmem: Virtual base address of the shared memory
* @req: Shared memory protocol handle for SCMI request and synchronous response
* @tee_shm: TEE shared memory handle @req or NULL if using IOMEM shmem
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
* @link: Reference in agent's channel list
*/
struct scmi_optee_channel {
u32 channel_id;
u32 tee_session;
u32 caps;
u32 rx_len;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
struct mutex mu;
struct scmi_chan_info *cinfo;
union {
struct scmi_shared_mem __iomem *shmem;
struct scmi_msg_payld *msg;
} req;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
struct tee_shm *tee_shm;
struct list_head link;
};
/**
* struct scmi_optee_agent - OP-TEE transport private data
*
* @dev: Device used for communication with TEE
* @tee_ctx: TEE context used for communication
* @caps: Supported channel capabilities
* @mu: Mutex for protection of @channel_list
* @channel_list: List of all created channels for the agent
*/
struct scmi_optee_agent {
struct device *dev;
struct tee_context *tee_ctx;
u32 caps;
struct mutex mu;
struct list_head channel_list;
};
/* There can be only 1 SCMI service in OP-TEE we connect to */
static struct scmi_optee_agent *scmi_optee_private;
/* Forward reference to scmi_optee transport initialization */
static int scmi_optee_init(void);
/* Open a session toward SCMI OP-TEE service with REE_KERNEL identity */
static int open_session(struct scmi_optee_agent *agent, u32 *tee_session)
{
struct device *dev = agent->dev;
struct tee_client_device *scmi_pta = to_tee_client_device(dev);
struct tee_ioctl_open_session_arg arg = { };
int ret;
memcpy(arg.uuid, scmi_pta->id.uuid.b, TEE_IOCTL_UUID_LEN);
arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
ret = tee_client_open_session(agent->tee_ctx, &arg, NULL);
if (ret < 0 || arg.ret) {
dev_err(dev, "Can't open tee session: %d / %#x\n", ret, arg.ret);
return -EOPNOTSUPP;
}
*tee_session = arg.session;
return 0;
}
static void close_session(struct scmi_optee_agent *agent, u32 tee_session)
{
tee_client_close_session(agent->tee_ctx, tee_session);
}
static int get_capabilities(struct scmi_optee_agent *agent)
{
struct tee_ioctl_invoke_arg arg = { };
struct tee_param param[1] = { };
u32 caps;
u32 tee_session;
int ret;
ret = open_session(agent, &tee_session);
if (ret)
return ret;
arg.func = PTA_SCMI_CMD_CAPABILITIES;
arg.session = tee_session;
arg.num_params = 1;
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
ret = tee_client_invoke_func(agent->tee_ctx, &arg, param);
close_session(agent, tee_session);
if (ret < 0 || arg.ret) {
dev_err(agent->dev, "Can't get capabilities: %d / %#x\n", ret, arg.ret);
return -EOPNOTSUPP;
}
caps = param[0].u.value.a;
if (!(caps & (PTA_SCMI_CAPS_SMT_HEADER | PTA_SCMI_CAPS_MSG_HEADER))) {
dev_err(agent->dev, "OP-TEE SCMI PTA doesn't support SMT and MSG\n");
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
return -EOPNOTSUPP;
}
agent->caps = caps;
return 0;
}
static int get_channel(struct scmi_optee_channel *channel)
{
struct device *dev = scmi_optee_private->dev;
struct tee_ioctl_invoke_arg arg = { };
struct tee_param param[1] = { };
unsigned int caps = 0;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
int ret;
if (channel->tee_shm)
caps = PTA_SCMI_CAPS_MSG_HEADER;
else
caps = PTA_SCMI_CAPS_SMT_HEADER;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
arg.func = PTA_SCMI_CMD_GET_CHANNEL;
arg.session = channel->tee_session;
arg.num_params = 1;
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
param[0].u.value.a = channel->channel_id;
param[0].u.value.b = caps;
ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
if (ret || arg.ret) {
dev_err(dev, "Can't get channel with caps %#x: %d / %#x\n", caps, ret, arg.ret);
return -EOPNOTSUPP;
}
/* From now on use channel identifer provided by OP-TEE SCMI service */
channel->channel_id = param[0].u.value.a;
channel->caps = caps;
return 0;
}
static int invoke_process_smt_channel(struct scmi_optee_channel *channel)
{
struct tee_ioctl_invoke_arg arg = {
.func = PTA_SCMI_CMD_PROCESS_SMT_CHANNEL,
.session = channel->tee_session,
.num_params = 1,
};
struct tee_param param[1] = { };
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
int ret;
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
param[0].u.value.a = channel->channel_id;
ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
if (ret < 0 || arg.ret) {
dev_err(scmi_optee_private->dev, "Can't invoke channel %u: %d / %#x\n",
channel->channel_id, ret, arg.ret);
return -EIO;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
}
return 0;
}
static int invoke_process_msg_channel(struct scmi_optee_channel *channel, size_t msg_size)
{
struct tee_ioctl_invoke_arg arg = {
.func = PTA_SCMI_CMD_PROCESS_MSG_CHANNEL,
.session = channel->tee_session,
.num_params = 3,
};
struct tee_param param[3] = { };
int ret;
param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
param[0].u.value.a = channel->channel_id;
param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
param[1].u.memref.shm = channel->tee_shm;
param[1].u.memref.size = msg_size;
param[2].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
param[2].u.memref.shm = channel->tee_shm;
param[2].u.memref.size = SCMI_OPTEE_MAX_MSG_SIZE;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
ret = tee_client_invoke_func(scmi_optee_private->tee_ctx, &arg, param);
if (ret < 0 || arg.ret) {
dev_err(scmi_optee_private->dev, "Can't invoke channel %u: %d / %#x\n",
channel->channel_id, ret, arg.ret);
return -EIO;
}
/* Save response size */
channel->rx_len = param[2].u.memref.size;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
return 0;
}
static int scmi_optee_link_supplier(struct device *dev)
{
if (!scmi_optee_private) {
if (scmi_optee_init())
dev_dbg(dev, "Optee bus not yet ready\n");
/* Wait for optee bus */
return -EPROBE_DEFER;
}
if (!device_link_add(dev, scmi_optee_private->dev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
dev_err(dev, "Adding link to supplier optee device failed\n");
return -ECANCELED;
}
return 0;
}
static bool scmi_optee_chan_available(struct device_node *of_node, int idx)
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
{
u32 channel_id;
return !of_property_read_u32_index(of_node, "linaro,optee-channel-id",
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
idx, &channel_id);
}
static void scmi_optee_clear_channel(struct scmi_chan_info *cinfo)
{
struct scmi_optee_channel *channel = cinfo->transport_info;
if (!channel->tee_shm)
shmem_clear_channel(channel->req.shmem);
}
static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *channel)
{
const size_t msg_size = SCMI_OPTEE_MAX_MSG_SIZE;
void *shbuf;
channel->tee_shm = tee_shm_alloc_kernel_buf(scmi_optee_private->tee_ctx, msg_size);
if (IS_ERR(channel->tee_shm)) {
dev_err(channel->cinfo->dev, "shmem allocation failed\n");
return -ENOMEM;
}
shbuf = tee_shm_get_va(channel->tee_shm, 0);
memset(shbuf, 0, msg_size);
channel->req.msg = shbuf;
channel->rx_len = msg_size;
return 0;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
}
static int setup_static_shmem(struct device *dev, struct scmi_chan_info *cinfo,
struct scmi_optee_channel *channel)
{
struct device_node *np;
resource_size_t size;
struct resource res;
int ret;
np = of_parse_phandle(cinfo->dev->of_node, "shmem", 0);
if (!of_device_is_compatible(np, "arm,scmi-shmem")) {
ret = -ENXIO;
goto out;
}
ret = of_address_to_resource(np, 0, &res);
if (ret) {
dev_err(dev, "Failed to get SCMI Tx shared memory\n");
goto out;
}
size = resource_size(&res);
channel->req.shmem = devm_ioremap(dev, res.start, size);
if (!channel->req.shmem) {
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
dev_err(dev, "Failed to ioremap SCMI Tx shared memory\n");
ret = -EADDRNOTAVAIL;
goto out;
}
ret = 0;
out:
of_node_put(np);
return ret;
}
static int setup_shmem(struct device *dev, struct scmi_chan_info *cinfo,
struct scmi_optee_channel *channel)
{
if (of_property_present(cinfo->dev->of_node, "shmem"))
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
return setup_static_shmem(dev, cinfo, channel);
else
return setup_dynamic_shmem(dev, channel);
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
}
static int scmi_optee_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, bool tx)
{
struct scmi_optee_channel *channel;
uint32_t channel_id;
int ret;
if (!tx)
return -ENODEV;
channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
if (!channel)
return -ENOMEM;
ret = of_property_read_u32_index(cinfo->dev->of_node, "linaro,optee-channel-id",
0, &channel_id);
if (ret)
return ret;
cinfo->transport_info = channel;
channel->cinfo = cinfo;
channel->channel_id = channel_id;
mutex_init(&channel->mu);
ret = setup_shmem(dev, cinfo, channel);
if (ret)
return ret;
ret = open_session(scmi_optee_private, &channel->tee_session);
if (ret)
goto err_free_shm;
ret = get_channel(channel);
if (ret)
goto err_close_sess;
/* Enable polling */
cinfo->no_completion_irq = true;
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
mutex_lock(&scmi_optee_private->mu);
list_add(&channel->link, &scmi_optee_private->channel_list);
mutex_unlock(&scmi_optee_private->mu);
return 0;
err_close_sess:
close_session(scmi_optee_private, channel->tee_session);
err_free_shm:
if (channel->tee_shm)
tee_shm_free(channel->tee_shm);
return ret;
}
static int scmi_optee_chan_free(int id, void *p, void *data)
{
struct scmi_chan_info *cinfo = p;
struct scmi_optee_channel *channel = cinfo->transport_info;
mutex_lock(&scmi_optee_private->mu);
list_del(&channel->link);
mutex_unlock(&scmi_optee_private->mu);
close_session(scmi_optee_private, channel->tee_session);
if (channel->tee_shm) {
tee_shm_free(channel->tee_shm);
channel->tee_shm = NULL;
}
cinfo->transport_info = NULL;
channel->cinfo = NULL;
return 0;
}
static int scmi_optee_send_message(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer)
{
struct scmi_optee_channel *channel = cinfo->transport_info;
int ret;
mutex_lock(&channel->mu);
if (channel->tee_shm) {
msg_tx_prepare(channel->req.msg, xfer);
ret = invoke_process_msg_channel(channel, msg_command_size(xfer));
} else {
shmem_tx_prepare(channel->req.shmem, xfer, cinfo);
ret = invoke_process_smt_channel(channel);
}
if (ret)
mutex_unlock(&channel->mu);
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
return ret;
}
static void scmi_optee_fetch_response(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer)
{
struct scmi_optee_channel *channel = cinfo->transport_info;
if (channel->tee_shm)
msg_fetch_response(channel->req.msg, channel->rx_len, xfer);
else
shmem_fetch_response(channel->req.shmem, xfer);
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
}
static void scmi_optee_mark_txdone(struct scmi_chan_info *cinfo, int ret,
struct scmi_xfer *__unused)
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
{
struct scmi_optee_channel *channel = cinfo->transport_info;
mutex_unlock(&channel->mu);
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
}
static struct scmi_transport_ops scmi_optee_ops = {
.link_supplier = scmi_optee_link_supplier,
.chan_available = scmi_optee_chan_available,
.chan_setup = scmi_optee_chan_setup,
.chan_free = scmi_optee_chan_free,
.send_message = scmi_optee_send_message,
.mark_txdone = scmi_optee_mark_txdone,
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
.fetch_response = scmi_optee_fetch_response,
.clear_channel = scmi_optee_clear_channel,
};
static int scmi_optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
{
return ver->impl_id == TEE_IMPL_ID_OPTEE;
}
static int scmi_optee_service_probe(struct device *dev)
{
struct scmi_optee_agent *agent;
struct tee_context *tee_ctx;
int ret;
/* Only one SCMI OP-TEE device allowed */
if (scmi_optee_private) {
dev_err(dev, "An SCMI OP-TEE device was already initialized: only one allowed\n");
return -EBUSY;
}
tee_ctx = tee_client_open_context(NULL, scmi_optee_ctx_match, NULL, NULL);
if (IS_ERR(tee_ctx))
return -ENODEV;
agent = devm_kzalloc(dev, sizeof(*agent), GFP_KERNEL);
if (!agent) {
ret = -ENOMEM;
goto err;
}
agent->dev = dev;
agent->tee_ctx = tee_ctx;
INIT_LIST_HEAD(&agent->channel_list);
mutex_init(&agent->mu);
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
ret = get_capabilities(agent);
if (ret)
goto err;
/* Ensure agent resources are all visible before scmi_optee_private is */
smp_mb();
scmi_optee_private = agent;
return 0;
err:
tee_client_close_context(tee_ctx);
return ret;
}
static int scmi_optee_service_remove(struct device *dev)
{
struct scmi_optee_agent *agent = scmi_optee_private;
if (!scmi_optee_private)
return -EINVAL;
if (!list_empty(&scmi_optee_private->channel_list))
return -EBUSY;
/* Ensure cleared reference is visible before resources are released */
smp_store_mb(scmi_optee_private, NULL);
tee_client_close_context(agent->tee_ctx);
return 0;
}
static const struct tee_client_device_id scmi_optee_service_id[] = {
{
UUID_INIT(0xa8cfe406, 0xd4f5, 0x4a2e,
0x9f, 0x8d, 0xa2, 0x5d, 0xc7, 0x54, 0xc0, 0x99)
},
{ }
};
MODULE_DEVICE_TABLE(tee, scmi_optee_service_id);
static struct tee_client_driver scmi_optee_driver = {
.id_table = scmi_optee_service_id,
.driver = {
.name = "scmi-optee",
.bus = &tee_bus_type,
.probe = scmi_optee_service_probe,
.remove = scmi_optee_service_remove,
},
};
static int scmi_optee_init(void)
{
return driver_register(&scmi_optee_driver.driver);
}
static void scmi_optee_exit(void)
{
if (scmi_optee_private)
driver_unregister(&scmi_optee_driver.driver);
}
const struct scmi_desc scmi_optee_desc = {
.transport_exit = scmi_optee_exit,
.ops = &scmi_optee_ops,
.max_rx_timeout_ms = 30,
.max_msg = 20,
.max_msg_size = SCMI_OPTEE_MAX_MSG_SIZE,
.sync_cmds_completed_on_ret = true,
firmware: arm_scmi: Add optee transport Add a new transport channel to the SCMI firmware interface driver for SCMI message exchange based on optee transport channel. The optee transport is realized by connecting and invoking OP-TEE SCMI service interface PTA. Optee transport support (CONFIG_ARM_SCMI_TRANSPORT_OPTEE) is default enabled when optee driver (CONFIG_OPTEE) is enabled. Effective optee transport is setup upon OP-TEE SCMI service discovery at optee device initialization. For this SCMI UUID is registered to the optee bus for probing. This is done from the link_supplier operator of the SCMI optee transport. The optee transport can use a statically defined shared memory in which case SCMI device tree node defines it using an "arm,scmi-shmem" compatible phandle through property shmem. Alternatively, optee transport allocates the shared memory buffer from the optee driver when no shmem property is defined. The protocol used to exchange SCMI message over that shared memory is negotiated between optee transport driver and the OP-TEE service through capabilities exchange. OP-TEE SCMI service is integrated in OP-TEE since its release tag 3.13.0. The service interface is published in [1]. Link: [1] https://github.com/OP-TEE/optee_os/blob/3.13.0/lib/libutee/include/pta_scmi_client.h Link: https://lore.kernel.org/r/20211028140009.23331-2-etienne.carriere@linaro.org Cc: Cristian Marussi <cristian.marussi@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-10-28 22:00:09 +08:00
};