OpenCloudOS-Kernel/drivers/net/netdevsim/netdev.c

624 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (C) 2017 Netronome Systems, Inc.
*
* This software is licensed under the GNU General License Version 2,
* June 1991 as shown in the file COPYING in the top-level directory of this
* source tree.
*
* THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
* OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
* THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
*/
#include <linux/debugfs.h>
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <net/netlink.h>
#include <net/pkt_cls.h>
#include <net/rtnetlink.h>
#include <net/switchdev.h>
#include "netdevsim.h"
struct nsim_vf_config {
int link_state;
u16 min_tx_rate;
u16 max_tx_rate;
u16 vlan;
__be16 vlan_proto;
u16 qos;
u8 vf_mac[ETH_ALEN];
bool spoofchk_enabled;
bool trusted;
bool rss_query_enabled;
};
static u32 nsim_dev_id;
static struct dentry *nsim_ddir;
static struct dentry *nsim_sdev_ddir;
static int nsim_num_vf(struct device *dev)
{
struct netdevsim *ns = to_nsim(dev);
return ns->num_vfs;
}
static struct bus_type nsim_bus = {
.name = DRV_NAME,
.dev_name = DRV_NAME,
.num_vf = nsim_num_vf,
};
static int nsim_vfs_enable(struct netdevsim *ns, unsigned int num_vfs)
{
ns->vfconfigs = kcalloc(num_vfs, sizeof(struct nsim_vf_config),
GFP_KERNEL);
if (!ns->vfconfigs)
return -ENOMEM;
ns->num_vfs = num_vfs;
return 0;
}
static void nsim_vfs_disable(struct netdevsim *ns)
{
kfree(ns->vfconfigs);
ns->vfconfigs = NULL;
ns->num_vfs = 0;
}
static ssize_t
nsim_numvfs_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct netdevsim *ns = to_nsim(dev);
unsigned int num_vfs;
int ret;
ret = kstrtouint(buf, 0, &num_vfs);
if (ret)
return ret;
rtnl_lock();
if (ns->num_vfs == num_vfs)
goto exit_good;
if (ns->num_vfs && num_vfs) {
ret = -EBUSY;
goto exit_unlock;
}
if (num_vfs) {
ret = nsim_vfs_enable(ns, num_vfs);
if (ret)
goto exit_unlock;
} else {
nsim_vfs_disable(ns);
}
exit_good:
ret = count;
exit_unlock:
rtnl_unlock();
return ret;
}
static ssize_t
nsim_numvfs_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct netdevsim *ns = to_nsim(dev);
return sprintf(buf, "%u\n", ns->num_vfs);
}
static struct device_attribute nsim_numvfs_attr =
__ATTR(sriov_numvfs, 0664, nsim_numvfs_show, nsim_numvfs_store);
static struct attribute *nsim_dev_attrs[] = {
&nsim_numvfs_attr.attr,
NULL,
};
static const struct attribute_group nsim_dev_attr_group = {
.attrs = nsim_dev_attrs,
};
static const struct attribute_group *nsim_dev_attr_groups[] = {
&nsim_dev_attr_group,
NULL,
};
static void nsim_dev_release(struct device *dev)
{
struct netdevsim *ns = to_nsim(dev);
nsim_vfs_disable(ns);
free_netdev(ns->netdev);
}
static struct device_type nsim_dev_type = {
.groups = nsim_dev_attr_groups,
.release = nsim_dev_release,
};
static int
nsim_port_attr_get(struct net_device *dev, struct switchdev_attr *attr)
{
struct netdevsim *ns = netdev_priv(dev);
switch (attr->id) {
case SWITCHDEV_ATTR_ID_PORT_PARENT_ID:
attr->u.ppid.id_len = sizeof(ns->sdev->switch_id);
memcpy(&attr->u.ppid.id, &ns->sdev->switch_id,
attr->u.ppid.id_len);
return 0;
default:
return -EOPNOTSUPP;
}
}
static const struct switchdev_ops nsim_switchdev_ops = {
.switchdev_port_attr_get = nsim_port_attr_get,
};
static int nsim_init(struct net_device *dev)
{
char sdev_ddir_name[10], sdev_link_name[32];
struct netdevsim *ns = netdev_priv(dev);
int err;
ns->netdev = dev;
ns->ddir = debugfs_create_dir(netdev_name(dev), nsim_ddir);
if (IS_ERR_OR_NULL(ns->ddir))
return -ENOMEM;
if (!ns->sdev) {
ns->sdev = kzalloc(sizeof(*ns->sdev), GFP_KERNEL);
if (!ns->sdev) {
err = -ENOMEM;
goto err_debugfs_destroy;
}
ns->sdev->refcnt = 1;
ns->sdev->switch_id = nsim_dev_id;
sprintf(sdev_ddir_name, "%u", ns->sdev->switch_id);
ns->sdev->ddir = debugfs_create_dir(sdev_ddir_name,
nsim_sdev_ddir);
if (IS_ERR_OR_NULL(ns->sdev->ddir)) {
err = PTR_ERR_OR_ZERO(ns->sdev->ddir) ?: -EINVAL;
goto err_sdev_free;
}
} else {
sprintf(sdev_ddir_name, "%u", ns->sdev->switch_id);
ns->sdev->refcnt++;
}
sprintf(sdev_link_name, "../../" DRV_NAME "_sdev/%s", sdev_ddir_name);
debugfs_create_symlink("sdev", ns->ddir, sdev_link_name);
err = nsim_bpf_init(ns);
if (err)
goto err_sdev_destroy;
ns->dev.id = nsim_dev_id++;
ns->dev.bus = &nsim_bus;
ns->dev.type = &nsim_dev_type;
err = device_register(&ns->dev);
if (err)
goto err_bpf_uninit;
SET_NETDEV_DEV(dev, &ns->dev);
SWITCHDEV_SET_OPS(dev, &nsim_switchdev_ops);
err = nsim_devlink_setup(ns);
if (err)
goto err_unreg_dev;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
nsim_ipsec_init(ns);
return 0;
err_unreg_dev:
device_unregister(&ns->dev);
err_bpf_uninit:
nsim_bpf_uninit(ns);
err_sdev_destroy:
if (!--ns->sdev->refcnt) {
debugfs_remove_recursive(ns->sdev->ddir);
err_sdev_free:
kfree(ns->sdev);
}
err_debugfs_destroy:
debugfs_remove_recursive(ns->ddir);
return err;
}
static void nsim_uninit(struct net_device *dev)
{
struct netdevsim *ns = netdev_priv(dev);
nsim_ipsec_teardown(ns);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
nsim_devlink_teardown(ns);
debugfs_remove_recursive(ns->ddir);
nsim_bpf_uninit(ns);
if (!--ns->sdev->refcnt) {
debugfs_remove_recursive(ns->sdev->ddir);
kfree(ns->sdev);
}
}
static void nsim_free(struct net_device *dev)
{
struct netdevsim *ns = netdev_priv(dev);
device_unregister(&ns->dev);
/* netdev and vf state will be freed out of device_release() */
}
static netdev_tx_t nsim_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct netdevsim *ns = netdev_priv(dev);
if (!nsim_ipsec_tx(ns, skb))
goto out;
u64_stats_update_begin(&ns->syncp);
ns->tx_packets++;
ns->tx_bytes += skb->len;
u64_stats_update_end(&ns->syncp);
out:
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
static void nsim_set_rx_mode(struct net_device *dev)
{
}
static int nsim_change_mtu(struct net_device *dev, int new_mtu)
{
struct netdevsim *ns = netdev_priv(dev);
if (ns->xdp.prog && new_mtu > NSIM_XDP_MAX_MTU)
return -EBUSY;
dev->mtu = new_mtu;
return 0;
}
static void
nsim_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
{
struct netdevsim *ns = netdev_priv(dev);
unsigned int start;
do {
start = u64_stats_fetch_begin(&ns->syncp);
stats->tx_bytes = ns->tx_bytes;
stats->tx_packets = ns->tx_packets;
} while (u64_stats_fetch_retry(&ns->syncp, start));
}
static int
nsim_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
{
return nsim_bpf_setup_tc_block_cb(type, type_data, cb_priv);
}
static int
nsim_setup_tc_block(struct net_device *dev, struct tc_block_offload *f)
{
struct netdevsim *ns = netdev_priv(dev);
if (f->binder_type != TCF_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
return -EOPNOTSUPP;
switch (f->command) {
case TC_BLOCK_BIND:
return tcf_block_cb_register(f->block, nsim_setup_tc_block_cb,
ns, ns, f->extack);
case TC_BLOCK_UNBIND:
tcf_block_cb_unregister(f->block, nsim_setup_tc_block_cb, ns);
return 0;
default:
return -EOPNOTSUPP;
}
}
static int nsim_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
{
struct netdevsim *ns = netdev_priv(dev);
/* Only refuse multicast addresses, zero address can mean unset/any. */
if (vf >= ns->num_vfs || is_multicast_ether_addr(mac))
return -EINVAL;
memcpy(ns->vfconfigs[vf].vf_mac, mac, ETH_ALEN);
return 0;
}
static int nsim_set_vf_vlan(struct net_device *dev, int vf,
u16 vlan, u8 qos, __be16 vlan_proto)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs || vlan > 4095 || qos > 7)
return -EINVAL;
ns->vfconfigs[vf].vlan = vlan;
ns->vfconfigs[vf].qos = qos;
ns->vfconfigs[vf].vlan_proto = vlan_proto;
return 0;
}
static int nsim_set_vf_rate(struct net_device *dev, int vf, int min, int max)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
ns->vfconfigs[vf].min_tx_rate = min;
ns->vfconfigs[vf].max_tx_rate = max;
return 0;
}
static int nsim_set_vf_spoofchk(struct net_device *dev, int vf, bool val)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
ns->vfconfigs[vf].spoofchk_enabled = val;
return 0;
}
static int nsim_set_vf_rss_query_en(struct net_device *dev, int vf, bool val)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
ns->vfconfigs[vf].rss_query_enabled = val;
return 0;
}
static int nsim_set_vf_trust(struct net_device *dev, int vf, bool val)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
ns->vfconfigs[vf].trusted = val;
return 0;
}
static int
nsim_get_vf_config(struct net_device *dev, int vf, struct ifla_vf_info *ivi)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
ivi->vf = vf;
ivi->linkstate = ns->vfconfigs[vf].link_state;
ivi->min_tx_rate = ns->vfconfigs[vf].min_tx_rate;
ivi->max_tx_rate = ns->vfconfigs[vf].max_tx_rate;
ivi->vlan = ns->vfconfigs[vf].vlan;
ivi->vlan_proto = ns->vfconfigs[vf].vlan_proto;
ivi->qos = ns->vfconfigs[vf].qos;
memcpy(&ivi->mac, ns->vfconfigs[vf].vf_mac, ETH_ALEN);
ivi->spoofchk = ns->vfconfigs[vf].spoofchk_enabled;
ivi->trusted = ns->vfconfigs[vf].trusted;
ivi->rss_query_en = ns->vfconfigs[vf].rss_query_enabled;
return 0;
}
static int nsim_set_vf_link_state(struct net_device *dev, int vf, int state)
{
struct netdevsim *ns = netdev_priv(dev);
if (vf >= ns->num_vfs)
return -EINVAL;
switch (state) {
case IFLA_VF_LINK_STATE_AUTO:
case IFLA_VF_LINK_STATE_ENABLE:
case IFLA_VF_LINK_STATE_DISABLE:
break;
default:
return -EINVAL;
}
ns->vfconfigs[vf].link_state = state;
return 0;
}
static int
nsim_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data)
{
switch (type) {
case TC_SETUP_BLOCK:
return nsim_setup_tc_block(dev, type_data);
default:
return -EOPNOTSUPP;
}
}
static int
nsim_set_features(struct net_device *dev, netdev_features_t features)
{
struct netdevsim *ns = netdev_priv(dev);
if ((dev->features & NETIF_F_HW_TC) > (features & NETIF_F_HW_TC))
return nsim_bpf_disable_tc(ns);
return 0;
}
static const struct net_device_ops nsim_netdev_ops = {
.ndo_init = nsim_init,
.ndo_uninit = nsim_uninit,
.ndo_start_xmit = nsim_start_xmit,
.ndo_set_rx_mode = nsim_set_rx_mode,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = nsim_change_mtu,
.ndo_get_stats64 = nsim_get_stats64,
.ndo_set_vf_mac = nsim_set_vf_mac,
.ndo_set_vf_vlan = nsim_set_vf_vlan,
.ndo_set_vf_rate = nsim_set_vf_rate,
.ndo_set_vf_spoofchk = nsim_set_vf_spoofchk,
.ndo_set_vf_trust = nsim_set_vf_trust,
.ndo_get_vf_config = nsim_get_vf_config,
.ndo_set_vf_link_state = nsim_set_vf_link_state,
.ndo_set_vf_rss_query_en = nsim_set_vf_rss_query_en,
.ndo_setup_tc = nsim_setup_tc,
.ndo_set_features = nsim_set_features,
.ndo_bpf = nsim_bpf,
};
static void nsim_setup(struct net_device *dev)
{
ether_setup(dev);
eth_hw_addr_random(dev);
dev->netdev_ops = &nsim_netdev_ops;
dev->priv_destructor = nsim_free;
dev->tx_queue_len = 0;
dev->flags |= IFF_NOARP;
dev->flags &= ~IFF_MULTICAST;
dev->priv_flags |= IFF_LIVE_ADDR_CHANGE |
IFF_NO_QUEUE;
dev->features |= NETIF_F_HIGHDMA |
NETIF_F_SG |
NETIF_F_FRAGLIST |
NETIF_F_HW_CSUM |
NETIF_F_TSO;
dev->hw_features |= NETIF_F_HW_TC;
dev->max_mtu = ETH_MAX_MTU;
}
static int nsim_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
return -EINVAL;
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
return -EADDRNOTAVAIL;
}
return 0;
}
static int nsim_newlink(struct net *src_net, struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
struct netdevsim *ns = netdev_priv(dev);
if (tb[IFLA_LINK]) {
struct net_device *joindev;
struct netdevsim *joinns;
joindev = __dev_get_by_index(src_net,
nla_get_u32(tb[IFLA_LINK]));
if (!joindev)
return -ENODEV;
if (joindev->netdev_ops != &nsim_netdev_ops)
return -EINVAL;
joinns = netdev_priv(joindev);
if (!joinns->sdev || !joinns->sdev->refcnt)
return -EINVAL;
ns->sdev = joinns->sdev;
}
return register_netdevice(dev);
}
static void nsim_dellink(struct net_device *dev, struct list_head *head)
{
unregister_netdevice_queue(dev, head);
}
static struct rtnl_link_ops nsim_link_ops __read_mostly = {
.kind = DRV_NAME,
.priv_size = sizeof(struct netdevsim),
.setup = nsim_setup,
.validate = nsim_validate,
.newlink = nsim_newlink,
.dellink = nsim_dellink,
};
static int __init nsim_module_init(void)
{
int err;
nsim_ddir = debugfs_create_dir(DRV_NAME, NULL);
if (IS_ERR_OR_NULL(nsim_ddir))
return -ENOMEM;
nsim_sdev_ddir = debugfs_create_dir(DRV_NAME "_sdev", NULL);
if (IS_ERR_OR_NULL(nsim_sdev_ddir)) {
err = -ENOMEM;
goto err_debugfs_destroy;
}
err = bus_register(&nsim_bus);
if (err)
goto err_sdir_destroy;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = nsim_devlink_init();
if (err)
goto err_unreg_bus;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = rtnl_link_register(&nsim_link_ops);
if (err)
goto err_dl_fini;
return 0;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err_dl_fini:
nsim_devlink_exit();
err_unreg_bus:
bus_unregister(&nsim_bus);
err_sdir_destroy:
debugfs_remove_recursive(nsim_sdev_ddir);
err_debugfs_destroy:
debugfs_remove_recursive(nsim_ddir);
return err;
}
static void __exit nsim_module_exit(void)
{
rtnl_link_unregister(&nsim_link_ops);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
nsim_devlink_exit();
bus_unregister(&nsim_bus);
debugfs_remove_recursive(nsim_sdev_ddir);
debugfs_remove_recursive(nsim_ddir);
}
module_init(nsim_module_init);
module_exit(nsim_module_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS_RTNL_LINK(DRV_NAME);