OpenCloudOS-Kernel/sound/soc/sof/imx/imx8m.c

509 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// Copyright 2020 NXP
//
// Author: Daniel Baluta <daniel.baluta@nxp.com>
//
// Hardware interface for audio DSP on i.MX8M
#include <linux/bits.h>
#include <linux/firmware.h>
#include <linux/mfd/syscon.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/module.h>
#include <sound/sof.h>
#include <sound/sof/xtensa.h>
#include <linux/firmware/imx/dsp.h>
#include "../ops.h"
#include "../sof-of-dev.h"
#include "imx-common.h"
#define MBOX_OFFSET 0x800000
#define MBOX_SIZE 0x1000
static struct clk_bulk_data imx8m_dsp_clks[] = {
{ .id = "ipg" },
{ .id = "ocram" },
{ .id = "core" },
};
/* DAP registers */
#define IMX8M_DAP_DEBUG 0x28800000
#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
#define IMX8M_PWRCTL_CORERESET BIT(16)
/* DSP audio mix registers */
#define AudioDSP_REG0 0x100
#define AudioDSP_REG1 0x104
#define AudioDSP_REG2 0x108
#define AudioDSP_REG3 0x10c
#define AudioDSP_REG2_RUNSTALL BIT(5)
struct imx8m_priv {
struct device *dev;
struct snd_sof_dev *sdev;
/* DSP IPC handler */
struct imx_dsp_ipc *dsp_ipc;
struct platform_device *ipc_dev;
struct imx_clocks *clks;
void __iomem *dap;
struct regmap *regmap;
};
static int imx8m_get_mailbox_offset(struct snd_sof_dev *sdev)
{
return MBOX_OFFSET;
}
static int imx8m_get_window_offset(struct snd_sof_dev *sdev, u32 id)
{
return MBOX_OFFSET;
}
static void imx8m_dsp_handle_reply(struct imx_dsp_ipc *ipc)
{
struct imx8m_priv *priv = imx_dsp_get_data(ipc);
unsigned long flags;
spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
snd_sof_ipc_process_reply(priv->sdev, 0);
spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
}
static void imx8m_dsp_handle_request(struct imx_dsp_ipc *ipc)
{
struct imx8m_priv *priv = imx_dsp_get_data(ipc);
u32 p; /* Panic code */
/* Read the message from the debug box. */
sof_mailbox_read(priv->sdev, priv->sdev->debug_box.offset + 4, &p, sizeof(p));
/* Check to see if the message is a panic code (0x0dead***) */
if ((p & SOF_IPC_PANIC_MAGIC_MASK) == SOF_IPC_PANIC_MAGIC)
snd_sof_dsp_panic(priv->sdev, p, true);
else
snd_sof_ipc_msgs_rx(priv->sdev);
}
static struct imx_dsp_ops imx8m_dsp_ops = {
.handle_reply = imx8m_dsp_handle_reply,
.handle_request = imx8m_dsp_handle_request,
};
static int imx8m_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
{
struct imx8m_priv *priv = sdev->pdata->hw_pdata;
sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
msg->msg_size);
imx_dsp_ring_doorbell(priv->dsp_ipc, 0);
return 0;
}
/*
* DSP control.
*/
static int imx8m_run(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
regmap_update_bits(priv->regmap, AudioDSP_REG2, AudioDSP_REG2_RUNSTALL, 0);
return 0;
}
static int imx8m_reset(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
u32 pwrctl;
/* put DSP into reset and stall */
pwrctl = readl(priv->dap + IMX8M_DAP_PWRCTL);
pwrctl |= IMX8M_PWRCTL_CORERESET;
writel(pwrctl, priv->dap + IMX8M_DAP_PWRCTL);
/* keep reset asserted for 10 cycles */
usleep_range(1, 2);
regmap_update_bits(priv->regmap, AudioDSP_REG2,
AudioDSP_REG2_RUNSTALL, AudioDSP_REG2_RUNSTALL);
/* take the DSP out of reset and keep stalled for FW loading */
pwrctl = readl(priv->dap + IMX8M_DAP_PWRCTL);
pwrctl &= ~IMX8M_PWRCTL_CORERESET;
writel(pwrctl, priv->dap + IMX8M_DAP_PWRCTL);
return 0;
}
static int imx8m_probe(struct snd_sof_dev *sdev)
{
struct platform_device *pdev =
container_of(sdev->dev, struct platform_device, dev);
struct device_node *np = pdev->dev.of_node;
struct device_node *res_node;
struct resource *mmio;
struct imx8m_priv *priv;
struct resource res;
u32 base, size;
int ret = 0;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->clks = devm_kzalloc(&pdev->dev, sizeof(*priv->clks), GFP_KERNEL);
if (!priv->clks)
return -ENOMEM;
sdev->num_cores = 1;
sdev->pdata->hw_pdata = priv;
priv->dev = sdev->dev;
priv->sdev = sdev;
priv->ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
PLATFORM_DEVID_NONE,
pdev, sizeof(*pdev));
if (IS_ERR(priv->ipc_dev))
return PTR_ERR(priv->ipc_dev);
priv->dsp_ipc = dev_get_drvdata(&priv->ipc_dev->dev);
if (!priv->dsp_ipc) {
/* DSP IPC driver not probed yet, try later */
ret = -EPROBE_DEFER;
dev_err(sdev->dev, "Failed to get drvdata\n");
goto exit_pdev_unregister;
}
imx_dsp_set_data(priv->dsp_ipc, priv);
priv->dsp_ipc->ops = &imx8m_dsp_ops;
/* DSP base */
mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mmio) {
base = mmio->start;
size = resource_size(mmio);
} else {
dev_err(sdev->dev, "error: failed to get DSP base at idx 0\n");
ret = -EINVAL;
goto exit_pdev_unregister;
}
priv->dap = devm_ioremap(sdev->dev, IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
if (!priv->dap) {
dev_err(sdev->dev, "error: failed to map DAP debug memory area");
ret = -ENODEV;
goto exit_pdev_unregister;
}
sdev->bar[SOF_FW_BLK_TYPE_IRAM] = devm_ioremap(sdev->dev, base, size);
if (!sdev->bar[SOF_FW_BLK_TYPE_IRAM]) {
dev_err(sdev->dev, "failed to ioremap base 0x%x size 0x%x\n",
base, size);
ret = -ENODEV;
goto exit_pdev_unregister;
}
sdev->mmio_bar = SOF_FW_BLK_TYPE_IRAM;
res_node = of_parse_phandle(np, "memory-region", 0);
if (!res_node) {
dev_err(&pdev->dev, "failed to get memory region node\n");
ret = -ENODEV;
goto exit_pdev_unregister;
}
ret = of_address_to_resource(res_node, 0, &res);
of_node_put(res_node);
if (ret) {
dev_err(&pdev->dev, "failed to get reserved region address\n");
goto exit_pdev_unregister;
}
sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, res.start,
resource_size(&res));
if (!sdev->bar[SOF_FW_BLK_TYPE_SRAM]) {
dev_err(sdev->dev, "failed to ioremap mem 0x%x size 0x%x\n",
base, size);
ret = -ENOMEM;
goto exit_pdev_unregister;
}
sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
/* set default mailbox offset for FW ready message */
sdev->dsp_box.offset = MBOX_OFFSET;
priv->regmap = syscon_regmap_lookup_by_compatible("fsl,dsp-ctrl");
if (IS_ERR(priv->regmap)) {
dev_err(sdev->dev, "cannot find dsp-ctrl registers");
ret = PTR_ERR(priv->regmap);
goto exit_pdev_unregister;
}
/* init clocks info */
priv->clks->dsp_clks = imx8m_dsp_clks;
priv->clks->num_dsp_clks = ARRAY_SIZE(imx8m_dsp_clks);
ret = imx8_parse_clocks(sdev, priv->clks);
if (ret < 0)
goto exit_pdev_unregister;
ASoC: SOF: imx8m: Add runtime PM / System PM support We make use of common imx8m_suspend / imx8m_resume functions for both system PM and runtime PM. imx8m_suspend: - frees the MU channels - disables the clocks imx8m_resume - enables the clocks - requests the MU channels On i.MX8MP there is no dedicated functionality to put the DSP in reset. The only way of doing this is to POWER DOWN the Audiomix domain. We are able to do this because turning off the clocks and freeing the channels makes the Audiomix to have no users thus PM kernel core turns it down. SOF core will not call system PM suspend handler if the DSP is already down, but at resume it will call the system PM resume. So, we need to keep track of the state via snd_sof_dsp_set_power_state Few insights on how SOF core handles the PM: - SOF core uses PM runtime autosuspend (with a timeout of 2 secs) - at probe, SOF core boots the DSP and lets the PM runtime suspend to turn it off, if there is no activity - when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core calls PM runtime resume to turn on the DSP - when the ALSA sound card is closed SOF core make use of PM subsystem to call PM runtime suspend and thus turning off the DSP. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-19 17:43:17 +08:00
ret = imx8_enable_clocks(sdev, priv->clks);
if (ret < 0)
goto exit_pdev_unregister;
return 0;
exit_pdev_unregister:
platform_device_unregister(priv->ipc_dev);
return ret;
}
static int imx8m_remove(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = sdev->pdata->hw_pdata;
imx8_disable_clocks(sdev, priv->clks);
platform_device_unregister(priv->ipc_dev);
return 0;
}
/* on i.MX8 there is 1 to 1 match between type and BAR idx */
static int imx8m_get_bar_index(struct snd_sof_dev *sdev, u32 type)
{
/* Only IRAM and SRAM bars are valid */
switch (type) {
case SOF_FW_BLK_TYPE_IRAM:
case SOF_FW_BLK_TYPE_SRAM:
return type;
default:
return -EINVAL;
}
}
static struct snd_soc_dai_driver imx8m_dai[] = {
{
.name = "sai1",
.playback = {
.channels_min = 1,
.channels_max = 32,
},
.capture = {
.channels_min = 1,
.channels_max = 32,
},
},
{
.name = "sai3",
.playback = {
.channels_min = 1,
.channels_max = 32,
},
.capture = {
.channels_min = 1,
.channels_max = 32,
},
},
};
ASoC: SOF: imx8m: Add runtime PM / System PM support We make use of common imx8m_suspend / imx8m_resume functions for both system PM and runtime PM. imx8m_suspend: - frees the MU channels - disables the clocks imx8m_resume - enables the clocks - requests the MU channels On i.MX8MP there is no dedicated functionality to put the DSP in reset. The only way of doing this is to POWER DOWN the Audiomix domain. We are able to do this because turning off the clocks and freeing the channels makes the Audiomix to have no users thus PM kernel core turns it down. SOF core will not call system PM suspend handler if the DSP is already down, but at resume it will call the system PM resume. So, we need to keep track of the state via snd_sof_dsp_set_power_state Few insights on how SOF core handles the PM: - SOF core uses PM runtime autosuspend (with a timeout of 2 secs) - at probe, SOF core boots the DSP and lets the PM runtime suspend to turn it off, if there is no activity - when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core calls PM runtime resume to turn on the DSP - when the ALSA sound card is closed SOF core make use of PM subsystem to call PM runtime suspend and thus turning off the DSP. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-19 17:43:17 +08:00
static int imx8m_dsp_set_power_state(struct snd_sof_dev *sdev,
const struct sof_dsp_power_state *target_state)
{
sdev->dsp_power_state = *target_state;
return 0;
}
static int imx8m_resume(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
int ret;
int i;
ret = imx8_enable_clocks(sdev, priv->clks);
if (ret < 0)
return ret;
for (i = 0; i < DSP_MU_CHAN_NUM; i++)
imx_dsp_request_channel(priv->dsp_ipc, i);
return 0;
}
static void imx8m_suspend(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->pdata->hw_pdata;
int i;
for (i = 0; i < DSP_MU_CHAN_NUM; i++)
imx_dsp_free_channel(priv->dsp_ipc, i);
imx8_disable_clocks(sdev, priv->clks);
}
static int imx8m_dsp_runtime_resume(struct snd_sof_dev *sdev)
{
int ret;
const struct sof_dsp_power_state target_dsp_state = {
.state = SOF_DSP_PM_D0,
};
ret = imx8m_resume(sdev);
if (ret < 0)
return ret;
return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
}
static int imx8m_dsp_runtime_suspend(struct snd_sof_dev *sdev)
{
const struct sof_dsp_power_state target_dsp_state = {
.state = SOF_DSP_PM_D3,
};
imx8m_suspend(sdev);
return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
}
static int imx8m_dsp_resume(struct snd_sof_dev *sdev)
{
int ret;
const struct sof_dsp_power_state target_dsp_state = {
.state = SOF_DSP_PM_D0,
};
ret = imx8m_resume(sdev);
if (ret < 0)
return ret;
if (pm_runtime_suspended(sdev->dev)) {
pm_runtime_disable(sdev->dev);
pm_runtime_set_active(sdev->dev);
pm_runtime_mark_last_busy(sdev->dev);
pm_runtime_enable(sdev->dev);
pm_runtime_idle(sdev->dev);
}
return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
}
static int imx8m_dsp_suspend(struct snd_sof_dev *sdev, unsigned int target_state)
{
const struct sof_dsp_power_state target_dsp_state = {
.state = target_state,
};
if (!pm_runtime_suspended(sdev->dev))
imx8m_suspend(sdev);
return snd_sof_dsp_set_power_state(sdev, &target_dsp_state);
}
/* i.MX8 ops */
static struct snd_sof_dsp_ops sof_imx8m_ops = {
/* probe and remove */
.probe = imx8m_probe,
.remove = imx8m_remove,
/* DSP core boot */
.run = imx8m_run,
.reset = imx8m_reset,
/* Block IO */
.block_read = sof_block_read,
.block_write = sof_block_write,
/* Mailbox IO */
.mailbox_read = sof_mailbox_read,
.mailbox_write = sof_mailbox_write,
/* ipc */
.send_msg = imx8m_send_msg,
.get_mailbox_offset = imx8m_get_mailbox_offset,
.get_window_offset = imx8m_get_window_offset,
.ipc_msg_data = sof_ipc_msg_data,
.set_stream_data_offset = sof_set_stream_data_offset,
.get_bar_index = imx8m_get_bar_index,
/* firmware loading */
.load_firmware = snd_sof_load_firmware_memcpy,
/* Debug information */
.dbg_dump = imx8_dump,
.debugfs_add_region_item = snd_sof_debugfs_add_region_item_iomem,
/* stream callbacks */
.pcm_open = sof_stream_pcm_open,
.pcm_close = sof_stream_pcm_close,
/* Firmware ops */
.dsp_arch_ops = &sof_xtensa_arch_ops,
/* DAI drivers */
.drv = imx8m_dai,
.num_drv = ARRAY_SIZE(imx8m_dai),
ASoC: SOF: imx8m: Add runtime PM / System PM support We make use of common imx8m_suspend / imx8m_resume functions for both system PM and runtime PM. imx8m_suspend: - frees the MU channels - disables the clocks imx8m_resume - enables the clocks - requests the MU channels On i.MX8MP there is no dedicated functionality to put the DSP in reset. The only way of doing this is to POWER DOWN the Audiomix domain. We are able to do this because turning off the clocks and freeing the channels makes the Audiomix to have no users thus PM kernel core turns it down. SOF core will not call system PM suspend handler if the DSP is already down, but at resume it will call the system PM resume. So, we need to keep track of the state via snd_sof_dsp_set_power_state Few insights on how SOF core handles the PM: - SOF core uses PM runtime autosuspend (with a timeout of 2 secs) - at probe, SOF core boots the DSP and lets the PM runtime suspend to turn it off, if there is no activity - when someone opens the ALSA sound card (aplay/arecord, etc) ALSA core calls PM runtime resume to turn on the DSP - when the ALSA sound card is closed SOF core make use of PM subsystem to call PM runtime suspend and thus turning off the DSP. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211119094319.81674-4-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-19 17:43:17 +08:00
.suspend = imx8m_dsp_suspend,
.resume = imx8m_dsp_resume,
.runtime_suspend = imx8m_dsp_runtime_suspend,
.runtime_resume = imx8m_dsp_runtime_resume,
.set_power_state = imx8m_dsp_set_power_state,
.hw_info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_NO_PERIOD_WAKEUP,
};
static struct sof_dev_desc sof_of_imx8mp_desc = {
.ipc_supported_mask = BIT(SOF_IPC),
.ipc_default = SOF_IPC,
.default_fw_path = {
[SOF_IPC] = "imx/sof",
},
.default_tplg_path = {
[SOF_IPC] = "imx/sof-tplg",
},
.default_fw_filename = {
[SOF_IPC] = "sof-imx8m.ri",
},
.nocodec_tplg_filename = "sof-imx8-nocodec.tplg",
.ops = &sof_imx8m_ops,
};
static const struct of_device_id sof_of_imx8m_ids[] = {
{ .compatible = "fsl,imx8mp-dsp", .data = &sof_of_imx8mp_desc},
{ }
};
MODULE_DEVICE_TABLE(of, sof_of_imx8m_ids);
/* DT driver definition */
static struct platform_driver snd_sof_of_imx8m_driver = {
.probe = sof_of_probe,
.remove = sof_of_remove,
.driver = {
.name = "sof-audio-of-imx8m",
.pm = &sof_of_pm,
.of_match_table = sof_of_imx8m_ids,
},
};
module_platform_driver(snd_sof_of_imx8m_driver);
MODULE_IMPORT_NS(SND_SOC_SOF_XTENSA);
MODULE_LICENSE("Dual BSD/GPL");