OpenCloudOS-Kernel/arch/arm/mach-s3c2416/Kconfig

# arch/arm/mach-s3c2416/Kconfig
#
# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
#
# Licensed under GPLv2

# note, this also supports the S3C2450 which is so similar it has the same
# ID code as the S3C2416.

config CPU_S3C2416
	bool
	depends on ARCH_S3C2410
	select CPU_ARM926T
	select S3C2416_DMA if S3C2410_DMA
	select CPU_LLSERIAL_S3C2440
	select S3C_GPIO_PULL_UPDOWN
	select SAMSUNG_CLKSRC
	select S3C2443_CLOCK
	help
	  Support for the S3C2416 SoC from the S3C24XX line

config S3C2416_DMA
	bool
	depends on CPU_S3C2416
	help
	  Internal config node for S3C2416 DMA support

config S3C2416_PM
	bool
	select S3C2412_PM_SLEEP
	help
	  Internal config node to apply S3C2416 power management

config S3C2416_SETUP_SDHCI
	bool
	select S3C2416_SETUP_SDHCI_GPIO
	help
	  Internal helper functions for S3C2416 based SDHCI systems

config S3C2416_SETUP_SDHCI_GPIO
	bool
	help
	  Common setup code for SDHCI gpio.

menu "S3C2416 Machines"

config MACH_SMDK2416
	bool "SMDK2416"
	select CPU_S3C2416
	select MACH_SMDK
	select S3C_DEV_FB
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_NAND
	select S3C_DEV_USB_HOST
	select S3C2416_SETUP_SDHCI
	select S3C2416_PM if PM
	help
	  Say Y here if you are using an SMDK2416

endmenu
ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-28 17:09:01 +08:00			`# arch/arm/mach-s3c2416/Kconfig`
			`#`
			`# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>`
			`#`
			`# Licensed under GPLv2`

ARM: SAMSUNG: Update S3C2416 entry with S3C2450 These devices are so similar that they share the same SoC ID code, so note this. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-30 15:32:26 +08:00			`# note, this also supports the S3C2450 which is so similar it has the same`
			`# ID code as the S3C2416.`

ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-28 17:09:01 +08:00			`config CPU_S3C2416`
			`bool`
			`depends on ARCH_S3C2410`
			`select CPU_ARM926T`
			`select S3C2416_DMA if S3C2410_DMA`
			`select CPU_LLSERIAL_S3C2440`
ARM: S3C2413: Update GPIO pull-up support Ensure the right get/set pull code is selected and assigned to the GPIO core. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-30 18:48:02 +08:00			`select S3C_GPIO_PULL_UPDOWN`
ARM: S3C2416: Add basic clock support Add basic clock support for the PLLs, HSMMC channels and PWM clocks. This is enough to get a basic system up and running. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-30 10:12:58 +08:00			`select SAMSUNG_CLKSRC`
			`select S3C2443_CLOCK`
ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-28 17:09:01 +08:00			`help`
			`Support for the S3C2416 SoC from the S3C24XX line`

			`config S3C2416_DMA`
			`bool`
			`depends on CPU_S3C2416`
			`help`
			`Internal config node for S3C2416 DMA support`

ARM: S3C2416: Add Power Management support for SMDK2416 Adds suspend-to-ram support for SMDK2416 based on existing 2412 PM code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-10-20 18:43:35 +08:00			`config S3C2416_PM`
			`bool`
ARM S3C24XX: Fix compilation of PM code for S3C2416 S3C2416 PM code uses low-level sleep routines from S3C2412 code, but these routines are compiled only for S3C2412 SoC. Split S3C2412_PM to two parts: S3C2412_PM, S3C2412_PM_SLEEP and select last in S3C2416's Kconfig. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-12-17 13:45:01 +08:00			`select S3C2412_PM_SLEEP`
ARM: S3C2416: Add Power Management support for SMDK2416 Adds suspend-to-ram support for SMDK2416 based on existing 2412 PM code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-10-20 18:43:35 +08:00			`help`
			`Internal config node to apply S3C2416 power management`

ARM: S3C2416: Add platform helpers for setup SDHCI Samsung S3C2416 has two SDHCI controllers compatible with other Samsung's SoCs (S3C64XX, S5PC100 etc...). Add required platform setup code that the devices can be used with sdhci-s3c driver. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> [kgene.kim@samsung.com: change to __raw_{readl,writel} from {readl,writel}] [kgene.kim@samsung.com: build error fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-12-17 13:42:09 +08:00			`config S3C2416_SETUP_SDHCI`
			`bool`
			`select S3C2416_SETUP_SDHCI_GPIO`
			`help`
			`Internal helper functions for S3C2416 based SDHCI systems`

			`config S3C2416_SETUP_SDHCI_GPIO`
			`bool`
			`help`
			`Common setup code for SDHCI gpio.`

ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-28 17:09:01 +08:00			`menu "S3C2416 Machines"`

ARM: S3C2416: Add initial support of SMDK2416 Add support of SMDK2416 development board. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-08-19 21:31:07 +08:00			`config MACH_SMDK2416`
			`bool "SMDK2416"`
			`select CPU_S3C2416`
ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-11-29 02:30:19 +08:00			`select MACH_SMDK`
ARM: SMDK2416: Add support for framebuffer device and ensure correct setup Add support for the LCD display on the SMDJK2416, and correctly name the framebuffer device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-03 14:29:44 +08:00			`select S3C_DEV_FB`
ARM: S3C2416: Add initial support of SMDK2416 Add support of SMDK2416 development board. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-08-19 21:31:07 +08:00			`select S3C_DEV_HSMMC`
ARM: S3C2416: Add support for second HSMMC channel Add support for the second HSMMC channel on the S3C2416. Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-29 17:59:43 +08:00			`select S3C_DEV_HSMMC1`
ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-11-29 02:30:19 +08:00			`select S3C_DEV_NAND`
			`select S3C_DEV_USB_HOST`
ARM: S3C2416: Add platform helpers for setup SDHCI Samsung S3C2416 has two SDHCI controllers compatible with other Samsung's SoCs (S3C64XX, S5PC100 etc...). Add required platform setup code that the devices can be used with sdhci-s3c driver. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> [kgene.kim@samsung.com: change to __raw_{readl,writel} from {readl,writel}] [kgene.kim@samsung.com: build error fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-12-17 13:42:09 +08:00			`select S3C2416_SETUP_SDHCI`
ARM: S3C2416: Add Power Management support for SMDK2416 Adds suspend-to-ram support for SMDK2416 based on existing 2412 PM code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-10-20 18:43:35 +08:00			`select S3C2416_PM if PM`
ARM: S3C2416: Add initial support of SMDK2416 Add support of SMDK2416 development board. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-08-19 21:31:07 +08:00			`help`
			`Say Y here if you are using an SMDK2416`
ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-04-28 17:09:01 +08:00
			`endmenu`