UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/pwm/Makefile

54 lines
2.2 KiB
Makefile
Raw Normal View History

pwm: Add PWM framework support This patch adds framework support for PWM (pulse width modulation) devices. The is a barebone PWM API already in the kernel under include/linux/pwm.h, but it does not allow for multiple drivers as each of them implements the pwm_*() functions. There are other PWM framework patches around from Bill Gatliff. Unlike his framework this one does not change the existing API for PWMs so that this framework can act as a drop in replacement for the existing API. Why another framework? Several people argue that there should not be another framework for PWMs but they should be integrated into one of the existing frameworks like led or hwmon. Unlike these frameworks the PWM framework is agnostic to the purpose of the PWM. In fact, a PWM can drive a LED, but this makes the LED framework a user of a PWM, like already done in leds-pwm.c. The gpio framework also is not suitable for PWMs. Every gpio could be turned into a PWM using timer based toggling, but on the other hand not every PWM hardware device can be turned into a gpio due to the lack of hardware capabilities. This patch does not try to improve the PWM API yet, this could be done in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Matthias Kaehlcke <matthias@kaehlcke.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> [thierry.reding@avionic-design.de: fixup typos, kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-01-28 16:40:40 +08:00
obj-$(CONFIG_PWM) += core.o
pwm: Add sysfs interface Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12 01:38:59 +08:00
obj-$(CONFIG_PWM_SYSFS) += sysfs.o
pwm: Move AB8500 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arun Murthy <arun.murthy@stericsson.com>
2012-08-31 17:46:24 +08:00
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
pwm: atmel-pwm: Add Atmel PWM controller driver Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-13 14:41:49 +08:00
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
pwm: add support for atmel-hlcdc-pwm device The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12 or sama5d3 families for instance) provides a PWM device. This driver add support for a PWM chip exposing a single PWM device (which will most likely be used to drive a backlight device). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-07 21:38:14 +08:00
obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
pwm: atmel: add Timer Counter Block PWM driver This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-08 23:36:42 +08:00
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
pwm: Add support for Broadcom iProc PWM controller Add support for the PWM controller present in Broadcom's iProc family of SoCs. It has been tested on the Northstar+ bcm958625HR board. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> [thierry.reding@gmail.com: bunch of coding style fixes, cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-05 14:00:25 +08:00
obj-$(CONFIG_PWM_BCM_IPROC) += pwm-bcm-iproc.o
pwm: kona: Introduce Kona PWM controller support Add support for the six-channel Kona PWM controller found on Broadcom mobile SoCs like bcm281xx. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-04-26 02:31:12 +08:00
obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
pwm: Add BCM2835 PWM driver Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi) Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-10-08 18:14:32 +08:00
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
pwm: Add support for the Berlin PWM controller Add a PWM controller driver for the Marvell Berlin SoCs. This PWM controller has 4 channels. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-10-02 22:59:47 +08:00
obj-$(CONFIG_PWM_BERLIN) += pwm-berlin.o
pwm: Move Blackfin PWM driver to PWM framework This commit moves the Blackfin PWM driver to the drivers/pwm sub- directory and converts it to register with the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-03 03:53:50 +08:00
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
pwm: Add Broadcom BCM7038 PWM controller support Add support for the BCM7038-style PWM controller found in all BCM7xxx STB SoCs. This controller has a hardcoded 2 channels per controller, and cascades a variable frequency generator on top of a fixed frequency generator which offers a range of a 148ns period all the way to ~622ms periods. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-15 07:47:06 +08:00
obj-$(CONFIG_PWM_BRCMSTB) += pwm-brcmstb.o
pwm: Add CLPS711X PWM support Add a new driver for the ARM CLPS711X Pulse Width Modulator (PWM) interface. This CPU contain two 4-bit PWM outputs with constant period, based on CPU PLL frequency. PWM polarity is determined by hardware by power on reset. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-12 23:53:05 +08:00
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
pwm: crc: Add Crystalcove (CRC) PWM driver The Crystalcove PMIC provides three PWM signals and this driver exports one of them on the BYT platform which is used to control backlight for DSI panel. This is platform device implementation of the drivers/mfd cell device for CRC PMIC. CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-26 17:02:08 +08:00
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
pwm: Add ChromeOS EC PWM driver Use the new ChromeOS EC EC_CMD_PWM_{GET,SET}_DUTY commands to control one or more PWMs attached to the Embedded Controller. Because the EC allows us to modify the duty cycle (as a percentage, where U16_MAX is 100%) but not the period, we assign the period a fixed value of EC_PWM_MAX_DUTY and reject all attempts to change it. This driver supports only device tree at the moment, because that provides a very flexible way of describing the relationship between PWMs and their consumer devices (e.g., backlight). On a non-DT system, we'll probably want to use the non-GENERIC addressing (i.e., we'll need to make special device instances that will use EC_PWM_TYPE_KB_LIGHT or EC_PWM_TYPE_DISPLAY_LIGHT), as well as the relatively inflexible pwm_lookup infrastructure for matching devices. Defer that work for now. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-16 07:28:44 +08:00
obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
pwm: add ep93xx PWM support Remove the non-standard EP93xx PWM driver in drivers/misc and add a new driver for the PWM controllers on the EP93xx platform based on the PWM framework. These PWM controllers each support 1 PWM channel with programmable duty cycle, frequency, and polarity inversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-16 09:40:03 +08:00
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
pwm: Add Freescale FTM PWM driver support The FTM PWM device can be found on Vybrid VF610 Tower and Layerscape LS-1 SoCs. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-02-27 17:39:49 +08:00
obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
pwm: Add PWM driver for HiSilicon BVT SOCs Add PWM driver for the PWM controller found on HiSilicon BVT SoCs such as Hi3519V100, Hi3516CV300, etc. The PWM controller is primarily in charge of controlling the P-Iris lens. Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: Jian Yuan <yuanjian12@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-11-28 17:42:46 +08:00
obj-$(CONFIG_PWM_HIBVT) += pwm-hibvt.o
pwm: Imagination Technologies PWM DAC driver The Pistachio SOC from Imagination Technologies includes a Pulse Width Modulation DAC which produces 1 to 4 digital bit-outputs which represent digital waveforms. These PWM outputs are primarily in charge of controlling backlight LED devices. Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com> Signed-off-by: Sai Masarapu <Sai.Masarapu@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> [thierry.reding: fixup license header as discussed on list] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-01-10 01:54:47 +08:00
obj-$(CONFIG_PWM_IMG) += pwm-img.o
ARM i.MX: Move i.MX pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [eric@eukrea.com: set chip.dev to prevent probe failure] [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 17:04:35 +08:00
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
pwm: Add Ingenic JZ4740 support This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-22 16:01:24 +08:00
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
pwm: Add LP3943 PWM driver This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-06 10:18:43 +08:00
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
pwm: NXP LPC18xx PWM/SCT driver This commit adds support for NXP LPC18xx PWM/SCT. NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State Configurable Timer (SCT) which can be configured as a Pulse Width Modulator. Other SoCs in that family may share the same hardware. The PWM supports a total of 16 channels, but only 15 can be simultaneously requested. There's only one period, global to all the channels, thus PWM driver will refuse setting different values to it, unless there's only one channel requested. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> [thierry.reding@gmail.com: remove excessive padding of fields] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-06 10:31:46 +08:00
obj-$(CONFIG_PWM_LPC18XX_SCT) += pwm-lpc18xx-sct.o
pwm: add lpc32xx PWM support Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-10 22:38:10 +08:00
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
pwm: add support for Intel Low Power Subsystem PWM Add support for Intel Low Power I/O subsystem PWM controllers found on Intel BayTrail SoC. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com> Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-03-20 22:04:23 +08:00
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
pwm: lpss: Properly split driver to parts The driver consists of core, PCI, and platform parts. It would be better to split them into separate files. The platform driver is now called pwm-lpss-platform. Thus, previously set CONFIG_PWM_LPSS=m is not enough to build it. But we are on the safe side since it seems no one from outside Intel is using it for now. While here, move to use macros module_pci_driver() and module_platform_driver(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> [thierry.reding: change select to depends on PWM_LPSS, cleanup] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-20 00:17:35 +08:00
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
pwm: Add support for Meson PWM Controller Add support for the PWM controller found in the Amlogic SoCs. This driver supports the Meson8b and GXBB SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-08-22 23:36:30 +08:00
obj-$(CONFIG_PWM_MESON) += pwm-meson.o
pwm: Add MediaTek PWM support This patch adds support for the PWM core found on current ARM base SoCs made by MediaTek. This IP core supports 5 channels and has 2 operational modes. There is the old mode, which is a classical PWM and the new mode which allows the user to define bitmasks that get clocked out on the pins. As the subsystem currently only supports PWM cores with the "old" mode, we can safely ignore the "new" mode for now. Signed-off-by: John Crispin <john@phrozen.org> [thierry.reding@gmail.com: minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-24 02:34:37 +08:00
obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
pwm: Add MediaTek display PWM driver support Add display PWM driver support to modify backlight for MT8173 and MT6595. The PWM has one channel to control the brightness of the display. When the (high_width / period) is closer to 1, the screen is brighter; otherwise, it is darker. Signed-off-by: YH Huang <yh.huang@mediatek.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-18 15:27:54 +08:00
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
pwm: add pwm-mxs support Add generic PWM framework driver (DT only) for Freescale MXS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-04-04 10:50:52 +08:00
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
pwm: Add PWM driver for OMAP using dual-mode timers Adds support for using a OMAP dual-mode timer with PWM capability as a Linux PWM device. The driver controls the timer by using the dmtimer API. Add a platform_data structure for each pwm-omap-dmtimer nodes containing the dmtimers functions in order to get driver not rely on platform specific functions. Cc: Grant Erickson <marathon96@gmail.com> Cc: NeilBrown <neilb@suse.de> Cc: Joachim Eastwood <manabian@gmail.com> Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Tony Lindgren <tony@atomide.com> [thierry.reding@gmail.com: coding style bikeshed, fix timer leak] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-02 19:14:21 +08:00
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
pwm: add pca9685 driver Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-30 15:50:12 +08:00
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
pwm: Move PUV3 PWM driver to PWM framework This commit moves the driver to drivers/pwm and converts it to the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Qin Rui <qinrui@mprc.pku.edu.cn> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-08-31 14:29:24 +08:00
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
pwm: Move PXA PWM driver to PWM framework This commit moves the PXA PWM driver to the drivers/pwm subdirectory and converts it to use the new PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-01-03 04:22:38 +08:00
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
pwm: Add support for R-Car PWM Timer This patch adds support for R-Car SoCs PWM Timer. The PWM timer of R-Car H2 has 7 channels. So, we can use the channels if we describe device tree nodes. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-09-30 16:47:53 +08:00
obj-$(CONFIG_PWM_RCAR) += pwm-rcar.o
pwm: Add Renesas TPU PWM driver The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-14 00:54:44 +08:00
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
pwm: add Rockchip SoC PWM support This commit adds a driver for the PWM controller found on Rockchip RK29, RK30 and RK31 SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-06-21 22:22:06 +08:00
obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
ARM Samsung: Move s3c pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> [eric@eukrea.com: fix pwmchip_add return code test] Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 17:04:36 +08:00
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
pwm: Add SPEAr PWM chip driver support Add support for PWM chips present on SPEAr platforms. These PWM chips support 4 channel output with programmable duty cycle and frequency. More details on these PWM chips can be obtained from relevant chapter of reference manual, present at following[1] location. 1. http://www.st.com/internet/mcu/product/251211.jsp Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-10-25 12:09:13 +08:00
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
pwm: sti: Add new driver for ST's PWM IP This driver supports all current STi platforms' PWM IPs. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding: rename module to pwm-sti, fix build breakage] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-07-14 22:33:27 +08:00
obj-$(CONFIG_PWM_STI) += pwm-sti.o
pwm: Add driver for STM32 plaftorm This driver adds support for PWM driver on STM32 platform. The SoC have multiple instances of the hardware IP and each of them could have small differences: number of channels, complementary output, auto reload register size... version 9: - fix commit message header - remove one space MODULE_ALIAS version 8: - fix comments done by Thierry on version 7 version 6: - change st,breakinput parameter to make it usuable for stm32f7 too. version 4: - detect at probe time hardware capabilities - fix comments done on v2 and v3 - use PWM atomic ops version 2: - only keep one comptatible - use DT parameters to discover hardware block configuration Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-20 17:15:05 +08:00
obj-$(CONFIG_PWM_STM32) += pwm-stm32.o
pwm: Add STM32 LPTimer PWM driver Add support for single PWM channel on Low-Power Timer, that can be found on some STM32 platforms. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-28 18:04:09 +08:00
obj-$(CONFIG_PWM_STM32_LP) += pwm-stm32-lp.o
pwm: Add a driver for the STMPE PWM This adds a driver for the PWM block found in chips of the STMPE 24xx series of multi-purpose I2C expanders. (I think STMPE means ST Microelectronics Multi-Purpose Expander.) This PWM was designed in accordance with Nokia specifications and is kind of weird and usually just switched between max and zero duty cycle. However it is indeed a PWM so it needs to live in the PWM subsystem. This PWM is mostly used for white LED backlight. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-04-06 05:22:37 +08:00
obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
pwm: Add Allwinner SoC support This adds a generic PWM framework driver for the PWM controller found on Allwinner SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-12-18 05:15:39 +08:00
obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
pwm: Add NVIDIA Tegra SoC support This commit adds a generic PWM framework driver for the PWFM controller found on NVIDIA Tegra SoCs. The driver is based on code from the Chromium kernel tree and was originally written by Gary King (NVIDIA) and later modified by Simon Que (Chromium). Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2011-12-21 14:47:07 +08:00
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
pwm: pwm-tiecap: PWM driver support for ECAP APWM ECAP hardware on AM33XX SOC supports auxiliary PWM (APWM) feature. This commit adds PWM driver support for ECAP hardware on AM33XX SOC. In the ECAP hardware, each PWM pin can also be configured to be in capture mode. Current implementation only supports PWM mode of operation. Also, hardware supports sync between multiple PWM pins but the driver supports simple independent PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 19:28:18 +08:00
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
pwm: pwm-tiehrpwm: PWM driver support for EHRPWM Enhanced high resolution PWM module (EHRPWM) hardware can be used to generate PWM output over 2 channels. This commit adds PWM driver support for EHRPWM device present on AM33XX SOC. Current implementation supports simple PWM functionality. Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-25 19:28:19 +08:00
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
pwm: Add TI PWM subsystem driver In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 16:48:06 +08:00
obj-$(CONFIG_PWM_TIPWMSS) += pwm-tipwmss.o
pwm: New driver to support PWMs on TWL4030/6030 series of PMICs The driver supports the following PWM outputs: TWL4030 PWM0 and PWM1 TWL6030 PWM1 and PWM2 On TWL4030 the PWM signals are muxed. Upon requesting the PWM the driver will select the correct mux so the PWM can be used. When the PWM has been freed the original configuration is going to be restored. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 18:09:57 +08:00
obj-$(CONFIG_PWM_TWL) += pwm-twl.o
pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs The driver supports the following LED outputs as generic PWM driver: TWL4030 LEDA and LEDB (PWMA and PWMB) TWL6030 Charging indicator LED (PWM LED) On TWL6030 when the PWM requested LED is configured to be controlled by SW. In this case the user can enable/disable and set the duty period freely. When the PWM has been freed, the LED driver is put back to HW control. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-27 18:09:58 +08:00
obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
ARM vt8500: Move vt8500 pwm driver to pwm framework Move the driver to drivers/pwm/ and convert it to use the framework. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alexey Charkov <alchark@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-03-15 17:04:37 +08:00
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
pwm: Add ZTE ZX PWM device driver It adds PWM device driver for ZTE ZX family SoCs. The PWM controller supports 4 devices with polarity configuration. The driver has been tested with pwm-regulator support to scale core voltage via cpufreq. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-07-27 16:23:37 +08:00
obj-$(CONFIG_PWM_ZX) += pwm-zx.o