OpenCloudOS-Kernel/arch/arm/boot/compressed/misc.c

209 lines
3.7 KiB
C
Raw Normal View History

/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
*
* Modified for ARM Linux by Russell King
*
* Nicolas Pitre <nico@visuaide.com> 1999/04/14 :
* For this code to run directly from Flash, all constant variables must
* be marked with 'const' and all other variables initialized at run-time
* only. This way all non constant variables will end up in the bss segment,
* which should point to addresses in RAM and cleared to 0 on start.
* This allows for a much quicker boot time.
*/
unsigned int __machine_arch_type;
#define _LINUX_STRING_H_
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <linux/linkage.h>
#include <asm/string.h>
#include <asm/unaligned.h>
static void putstr(const char *ptr);
extern void error(char *x);
#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
#ifdef CONFIG_CPU_V6
static void icedcc_putc(int ch)
{
int status, i = 0x4000000;
do {
if (--i < 0)
return;
asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
} while (status & (1 << 29));
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
#elif defined(CONFIG_CPU_V7)
static void icedcc_putc(int ch)
{
asm(
"wait: mrc p14, 0, pc, c0, c1, 0 \n\
bcs wait \n\
mcr p14, 0, %0, c0, c5, 0 "
: : "r" (ch));
}
#elif defined(CONFIG_CPU_XSCALE)
static void icedcc_putc(int ch)
{
int status, i = 0x4000000;
do {
if (--i < 0)
return;
asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
} while (status & (1 << 28));
asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
}
#else
static void icedcc_putc(int ch)
{
int status, i = 0x4000000;
do {
if (--i < 0)
return;
asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
} while (status & 2);
asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
}
#endif
#define putc(ch) icedcc_putc(ch)
#endif
static void putstr(const char *ptr)
{
char c;
while ((c = *ptr++) != '\0') {
if (c == '\n')
putc('\r');
putc(c);
}
flush();
}
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i = 0;
unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
for (i = __n >> 3; i > 0; i--) {
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
}
if (__n & 1 << 2) {
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
*d++ = *s++;
}
if (__n & 1 << 1) {
*d++ = *s++;
*d++ = *s++;
}
if (__n & 1)
*d++ = *s++;
return __dest;
}
/*
* gzip delarations
*/
extern char input_data[];
extern char input_data_end[];
unsigned char *output_data;
unsigned long output_ptr;
unsigned long free_mem_ptr;
unsigned long free_mem_end_ptr;
#ifndef arch_error
#define arch_error(x)
#endif
void error(char *x)
{
arch_error(x);
putstr("\n\n");
putstr(x);
putstr("\n\n -- System halted");
while(1); /* Halt */
}
asmlinkage void __div0(void)
{
error("Attempting division by 0!");
}
extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
unsigned long
decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
unsigned long free_mem_ptr_end_p,
int arch_id)
{
unsigned char *tmp;
output_data = (unsigned char *)output_start;
free_mem_ptr = free_mem_ptr_p;
inflate: refactor inflate malloc code Inflate requires some dynamic memory allocation very early in the boot process and this is provided with a set of four functions: malloc/free/gzip_mark/gzip_release. The old inflate code used a mark/release strategy rather than implement free. This new version instead keeps a count on the number of outstanding allocations and when it hits zero, it resets the malloc arena. This allows removing all the mark and release implementations and unifying all the malloc/free implementations. The architecture-dependent code must define two addresses: - free_mem_ptr, the address of the beginning of the area in which allocations should be made - free_mem_end_ptr, the address of the end of the area in which allocations should be made. If set to 0, then no check is made on the number of allocations, it just grows as much as needed The architecture-dependent code can also provide an arch_decomp_wdog() function call. This function will be called several times during the decompression process, and allow to notify the watchdog that the system is still running. If an architecture provides such a call, then it must define ARCH_HAS_DECOMP_WDOG so that the generic inflate code calls arch_decomp_wdog(). Work initially done by Matt Mackall, updated to a recent version of the kernel and improved by me. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 16:45:44 +08:00
free_mem_end_ptr = free_mem_ptr_end_p;
__machine_arch_type = arch_id;
arch_decomp_setup();
tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
output_ptr = get_unaligned_le32(tmp);
putstr("Uncompressing Linux...");
do_decompress(input_data, input_data_end - input_data,
output_data, error);
putstr(" done, booting the kernel.\n");
return output_ptr;
}