OpenCloudOS-Kernel/drivers/scsi/lpfc/lpfc_ct.c

1814 lines
50 KiB
C
Raw Normal View History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
/*
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
* Fibre Channel SCSI LAN Device Driver CT support: FC Generic Services FC-GS
*/
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/utsname.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_version.h"
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
#define HBA_PORTSPEED_UNKNOWN 0 /* Unknown - transceiver
* incapable of reporting */
#define HBA_PORTSPEED_1GBIT 1 /* 1 GBit/sec */
#define HBA_PORTSPEED_2GBIT 2 /* 2 GBit/sec */
#define HBA_PORTSPEED_4GBIT 8 /* 4 GBit/sec */
#define HBA_PORTSPEED_8GBIT 16 /* 8 GBit/sec */
#define HBA_PORTSPEED_10GBIT 4 /* 10 GBit/sec */
#define HBA_PORTSPEED_NOT_NEGOTIATED 5 /* Speed not established */
#define FOURBYTES 4
static char *lpfc_release_version = LPFC_DRIVER_VERSION;
static void
lpfc_ct_ignore_hbq_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
struct lpfc_dmabuf *mp, uint32_t size)
{
if (!mp) {
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"0146 Ignoring unsolicited CT No HBQ "
"status = x%x\n",
piocbq->iocb.ulpStatus);
}
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"0145 Ignoring unsolicted CT HBQ Size:%d "
"status = x%x\n",
size, piocbq->iocb.ulpStatus);
}
static void
lpfc_ct_unsol_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
struct lpfc_dmabuf *mp, uint32_t size)
{
lpfc_ct_ignore_hbq_buffer(phba, piocbq, mp, size);
}
void
lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
struct lpfc_dmabuf *mp = NULL;
IOCB_t *icmd = &piocbq->iocb;
int i;
struct lpfc_iocbq *iocbq;
dma_addr_t paddr;
uint32_t size;
struct list_head head;
struct lpfc_dmabuf *bdeBuf;
lpfc_bsg_ct_unsol_event(phba, pring, piocbq);
if (unlikely(icmd->ulpStatus == IOSTAT_NEED_BUFFER)) {
lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
} else if ((icmd->ulpStatus == IOSTAT_LOCAL_REJECT) &&
((icmd->un.ulpWord[4] & 0xff) == IOERR_RCV_BUFFER_WAITING)) {
/* Not enough posted buffers; Try posting more buffers */
phba->fc_stat.NoRcvBuf++;
if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
lpfc_post_buffer(phba, pring, 2);
return;
}
/* If there are no BDEs associated with this IOCB,
* there is nothing to do.
*/
if (icmd->ulpBdeCount == 0)
return;
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
INIT_LIST_HEAD(&head);
list_add_tail(&head, &piocbq->list);
list_for_each_entry(iocbq, &head, list) {
icmd = &iocbq->iocb;
if (icmd->ulpBdeCount == 0)
continue;
bdeBuf = iocbq->context2;
iocbq->context2 = NULL;
size = icmd->un.cont64[0].tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf, size);
lpfc_in_buf_free(phba, bdeBuf);
if (icmd->ulpBdeCount == 2) {
bdeBuf = iocbq->context3;
iocbq->context3 = NULL;
size = icmd->unsli3.rcvsli3.bde2.tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf,
size);
lpfc_in_buf_free(phba, bdeBuf);
}
}
list_del(&head);
} else {
INIT_LIST_HEAD(&head);
list_add_tail(&head, &piocbq->list);
list_for_each_entry(iocbq, &head, list) {
icmd = &iocbq->iocb;
if (icmd->ulpBdeCount == 0)
lpfc_ct_unsol_buffer(phba, iocbq, NULL, 0);
for (i = 0; i < icmd->ulpBdeCount; i++) {
paddr = getPaddr(icmd->un.cont64[i].addrHigh,
icmd->un.cont64[i].addrLow);
mp = lpfc_sli_ringpostbuf_get(phba, pring,
paddr);
size = icmd->un.cont64[i].tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, iocbq, mp, size);
lpfc_in_buf_free(phba, mp);
}
lpfc_post_buffer(phba, pring, i);
}
list_del(&head);
}
}
static void
lpfc_free_ct_rsp(struct lpfc_hba *phba, struct lpfc_dmabuf *mlist)
{
struct lpfc_dmabuf *mlast, *next_mlast;
list_for_each_entry_safe(mlast, next_mlast, &mlist->list, list) {
lpfc_mbuf_free(phba, mlast->virt, mlast->phys);
list_del(&mlast->list);
kfree(mlast);
}
lpfc_mbuf_free(phba, mlist->virt, mlist->phys);
kfree(mlist);
return;
}
static struct lpfc_dmabuf *
lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl,
uint32_t size, int *entries)
{
struct lpfc_dmabuf *mlist = NULL;
struct lpfc_dmabuf *mp;
int cnt, i = 0;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
/* We get chunks of FCELSSIZE */
cnt = size > FCELSSIZE ? FCELSSIZE: size;
while (size) {
/* Allocate buffer for rsp payload */
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
if (mlist)
lpfc_free_ct_rsp(phba, mlist);
return NULL;
}
INIT_LIST_HEAD(&mp->list);
if (cmdcode == be16_to_cpu(SLI_CTNS_GID_FT) ||
cmdcode == be16_to_cpu(SLI_CTNS_GFF_ID))
mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(mp->phys));
else
mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys));
if (!mp->virt) {
kfree(mp);
if (mlist)
lpfc_free_ct_rsp(phba, mlist);
return NULL;
}
/* Queue it to a linked list */
if (!mlist)
mlist = mp;
else
list_add_tail(&mp->list, &mlist->list);
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
/* build buffer ptr list for IOCB */
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
bpl->tus.f.bdeSize = (uint16_t) cnt;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
i++;
size -= cnt;
}
*entries = i;
return mlist;
}
int
lpfc_ct_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *ctiocb)
{
struct lpfc_dmabuf *buf_ptr;
if (ctiocb->context_un.ndlp) {
lpfc_nlp_put(ctiocb->context_un.ndlp);
ctiocb->context_un.ndlp = NULL;
}
if (ctiocb->context1) {
buf_ptr = (struct lpfc_dmabuf *) ctiocb->context1;
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
ctiocb->context1 = NULL;
}
if (ctiocb->context2) {
lpfc_free_ct_rsp(phba, (struct lpfc_dmabuf *) ctiocb->context2);
ctiocb->context2 = NULL;
}
if (ctiocb->context3) {
buf_ptr = (struct lpfc_dmabuf *) ctiocb->context3;
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
ctiocb->context1 = NULL;
}
lpfc_sli_release_iocbq(phba, ctiocb);
return 0;
}
static int
lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
struct lpfc_dmabuf *inp, struct lpfc_dmabuf *outp,
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *),
struct lpfc_nodelist *ndlp, uint32_t usr_flg, uint32_t num_entry,
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *geniocb;
int rc;
/* Allocate buffer for command iocb */
geniocb = lpfc_sli_get_iocbq(phba);
if (geniocb == NULL)
return 1;
icmd = &geniocb->iocb;
icmd->un.genreq64.bdl.ulpIoTag32 = 0;
icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64));
if (usr_flg)
geniocb->context3 = NULL;
else
geniocb->context3 = (uint8_t *) bmp;
/* Save for completion so we can release these resources */
geniocb->context1 = (uint8_t *) inp;
geniocb->context2 = (uint8_t *) outp;
geniocb->context_un.ndlp = lpfc_nlp_get(ndlp);
/* Fill in payload, bp points to frame payload */
icmd->ulpCommand = CMD_GEN_REQUEST64_CR;
/* Fill in rest of iocb */
icmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
icmd->un.genreq64.w5.hcsw.Dfctl = 0;
icmd->un.genreq64.w5.hcsw.Rctl = FC_UNSOL_CTL;
icmd->un.genreq64.w5.hcsw.Type = FC_COMMON_TRANSPORT_ULP;
if (!tmo) {
/* FC spec states we need 3 * ratov for CT requests */
tmo = (3 * phba->fc_ratov);
}
icmd->ulpTimeout = tmo;
icmd->ulpBdeCount = 1;
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
icmd->ulpContext = ndlp->nlp_rpi;
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
/* For GEN_REQUEST64_CR, use the RPI */
icmd->ulpCt_h = 0;
icmd->ulpCt_l = 0;
}
/* Issue GEN REQ IOCB for NPORT <did> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0119 Issue GEN REQ IOCB to NPORT x%x "
"Data: x%x x%x\n",
ndlp->nlp_DID, icmd->ulpIoTag,
vport->port_state);
geniocb->iocb_cmpl = cmpl;
geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
geniocb->vport = vport;
geniocb->retry = retry;
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
if (rc == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, geniocb);
return 1;
}
return 0;
}
static int
lpfc_ct_cmd(struct lpfc_vport *vport, struct lpfc_dmabuf *inmp,
struct lpfc_dmabuf *bmp, struct lpfc_nodelist *ndlp,
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *),
uint32_t rsp_size, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
struct ulp_bde64 *bpl = (struct ulp_bde64 *) bmp->virt;
struct lpfc_dmabuf *outmp;
int cnt = 0, status;
int cmdcode = ((struct lpfc_sli_ct_request *) inmp->virt)->
CommandResponse.bits.CmdRsp;
bpl++; /* Skip past ct request */
/* Put buffer(s) for ct rsp in bpl */
outmp = lpfc_alloc_ct_rsp(phba, cmdcode, bpl, rsp_size, &cnt);
if (!outmp)
return -ENOMEM;
status = lpfc_gen_req(vport, bmp, inmp, outmp, cmpl, ndlp, 0,
cnt+1, 0, retry);
if (status) {
lpfc_free_ct_rsp(phba, outmp);
return -ENOMEM;
}
return 0;
}
struct lpfc_vport *
lpfc_find_vport_by_did(struct lpfc_hba *phba, uint32_t did) {
struct lpfc_vport *vport_curr;
unsigned long flags;
spin_lock_irqsave(&phba->hbalock, flags);
list_for_each_entry(vport_curr, &phba->port_list, listentry) {
if ((vport_curr->fc_myDID) && (vport_curr->fc_myDID == did)) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return vport_curr;
}
}
spin_unlock_irqrestore(&phba->hbalock, flags);
return NULL;
}
static int
lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ct_request *Response =
(struct lpfc_sli_ct_request *) mp->virt;
struct lpfc_nodelist *ndlp = NULL;
struct lpfc_dmabuf *mlast, *next_mp;
uint32_t *ctptr = (uint32_t *) & Response->un.gid.PortType;
uint32_t Did, CTentry;
int Cnt;
struct list_head head;
lpfc_set_disctmo(vport);
vport->num_disc_nodes = 0;
vport->fc_ns_retry = 0;
list_add_tail(&head, &mp->list);
list_for_each_entry_safe(mp, next_mp, &head, list) {
mlast = mp;
Cnt = Size > FCELSSIZE ? FCELSSIZE : Size;
Size -= Cnt;
if (!ctptr) {
ctptr = (uint32_t *) mlast->virt;
} else
Cnt -= 16; /* subtract length of CT header */
/* Loop through entire NameServer list of DIDs */
while (Cnt >= sizeof (uint32_t)) {
/* Get next DID from NameServer List */
CTentry = *ctptr++;
Did = ((be32_to_cpu(CTentry)) & Mask_DID);
ndlp = NULL;
/*
* Check for rscn processing or not
* To conserve rpi's, filter out addresses for other
* vports on the same physical HBAs.
*/
if ((Did != vport->fc_myDID) &&
((lpfc_find_vport_by_did(phba, Did) == NULL) ||
vport->cfg_peer_port_login)) {
if ((vport->port_type != LPFC_NPIV_PORT) ||
(!(vport->ct_flags & FC_CT_RFF_ID)) ||
(!vport->cfg_restrict_login)) {
ndlp = lpfc_setup_disc_node(vport, Did);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
lpfc_debugfs_disc_trc(vport,
LPFC_DISC_TRC_CT,
"Parse GID_FTrsp: "
"did:x%x flg:x%x x%x",
Did, ndlp->nlp_flag,
vport->fc_flag);
lpfc_printf_vlog(vport,
KERN_INFO,
LOG_DISCOVERY,
"0238 Process "
"x%x NameServer Rsp"
"Data: x%x x%x x%x\n",
Did, ndlp->nlp_flag,
vport->fc_flag,
vport->fc_rscn_id_cnt);
} else {
lpfc_debugfs_disc_trc(vport,
LPFC_DISC_TRC_CT,
"Skip1 GID_FTrsp: "
"did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag,
vport->fc_rscn_id_cnt);
lpfc_printf_vlog(vport,
KERN_INFO,
LOG_DISCOVERY,
"0239 Skip x%x "
"NameServer Rsp Data: "
"x%x x%x\n",
Did, vport->fc_flag,
vport->fc_rscn_id_cnt);
}
} else {
if (!(vport->fc_flag & FC_RSCN_MODE) ||
(lpfc_rscn_payload_check(vport, Did))) {
lpfc_debugfs_disc_trc(vport,
LPFC_DISC_TRC_CT,
"Query GID_FTrsp: "
"did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag,
vport->fc_rscn_id_cnt);
/* This NPortID was previously
* a FCP target, * Don't even
* bother to send GFF_ID.
*/
ndlp = lpfc_findnode_did(vport,
Did);
if (ndlp &&
NLP_CHK_NODE_ACT(ndlp)
&& (ndlp->nlp_type &
NLP_FCP_TARGET))
lpfc_setup_disc_node
(vport, Did);
else if (lpfc_ns_cmd(vport,
SLI_CTNS_GFF_ID,
0, Did) == 0)
vport->num_disc_nodes++;
}
else {
lpfc_debugfs_disc_trc(vport,
LPFC_DISC_TRC_CT,
"Skip2 GID_FTrsp: "
"did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag,
vport->fc_rscn_id_cnt);
lpfc_printf_vlog(vport,
KERN_INFO,
LOG_DISCOVERY,
"0245 Skip x%x "
"NameServer Rsp Data: "
"x%x x%x\n",
Did, vport->fc_flag,
vport->fc_rscn_id_cnt);
}
}
}
if (CTentry & (be32_to_cpu(SLI_CT_LAST_ENTRY)))
goto nsout1;
Cnt -= sizeof (uint32_t);
}
ctptr = NULL;
}
nsout1:
list_del(&head);
return 0;
}
static void
lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfc_dmabuf *bmp;
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
struct lpfc_nodelist *ndlp;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
int rc;
/* First save ndlp, before we overwrite it */
ndlp = cmdiocb->context_un.ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
bmp = (struct lpfc_dmabuf *) cmdiocb->context3;
irsp = &rspiocb->iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT cmpl: status:x%x/x%x rtry:%d",
irsp->ulpStatus, irsp->un.ulpWord[4], vport->fc_ns_retry);
/* Don't bother processing response if vport is being torn down. */
if (vport->load_flag & FC_UNLOADING) {
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
goto out;
}
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (lpfc_els_chk_latt(vport)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0216 Link event during NS query\n");
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
goto out;
}
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (lpfc_error_lost_link(irsp)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0226 NS query failed due to link event\n");
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
goto out;
}
if (irsp->ulpStatus) {
/* Check for retry */
if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (irsp->ulpStatus != IOSTAT_LOCAL_REJECT ||
irsp->un.ulpWord[4] != IOERR_NO_RESOURCES)
vport->fc_ns_retry++;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
/* CT command is being retried */
rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT,
vport->fc_ns_retry, 0);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (rc == 0)
goto out;
}
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0257 GID_FT Query error: 0x%x 0x%x\n",
irsp->ulpStatus, vport->fc_ns_retry);
} else {
/* Good status, continue checking */
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0208 NameServer Rsp Data: x%x\n",
vport->fc_flag);
lpfc_ns_rsp(vport, outp,
(uint32_t) (irsp->un.genreq64.bdl.bdeSize));
} else if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_RJT)) {
/* NameServer Rsp Error */
if ((CTrsp->ReasonCode == SLI_CT_UNABLE_TO_PERFORM_REQ)
&& (CTrsp->Explanation == SLI_CT_NO_FC4_TYPES)) {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0269 No NameServer Entries "
"Data: x%x x%x x%x x%x\n",
CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT no entry cmd:x%x rsn:x%x exp:x%x",
(uint32_t)CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
} else {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0240 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT rsp err1 cmd:x%x rsn:x%x exp:x%x",
(uint32_t)CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
}
} else {
/* NameServer Rsp Error */
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0241 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT rsp err2 cmd:x%x rsn:x%x exp:x%x",
(uint32_t)CTrsp->CommandResponse.bits.CmdRsp,
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
}
}
/* Link up / RSCN discovery */
if (vport->num_disc_nodes == 0) {
/*
* The driver has cycled through all Nports in the RSCN payload.
* Complete the handling by cleaning up and marking the
* current driver state.
*/
if (vport->port_state >= LPFC_DISC_AUTH) {
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_els_flush_rscn(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_MODE; /* RSCN still */
spin_unlock_irq(shost->host_lock);
}
else
lpfc_els_flush_rscn(vport);
}
lpfc_disc_start(vport);
}
out:
cmdiocb->context_un.ndlp = ndlp; /* Now restore ndlp for free */
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_gff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_dmabuf *inp = (struct lpfc_dmabuf *) cmdiocb->context1;
struct lpfc_dmabuf *outp = (struct lpfc_dmabuf *) cmdiocb->context2;
struct lpfc_sli_ct_request *CTrsp;
int did, rc, retry;
uint8_t fbits;
struct lpfc_nodelist *ndlp;
did = ((struct lpfc_sli_ct_request *) inp->virt)->un.gff.PortId;
did = be32_to_cpu(did);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GFF_ID cmpl: status:x%x/x%x did:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4], did);
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
/* Good status, continue checking */
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
fbits = CTrsp->un.gff_acc.fbits[FCP_TYPE_FEATURE_OFFSET];
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) {
if ((fbits & FC4_FEATURE_INIT) &&
!(fbits & FC4_FEATURE_TARGET)) {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0270 Skip x%x GFF "
"NameServer Rsp Data: (init) "
"x%x x%x\n", did, fbits,
vport->fc_rscn_id_cnt);
goto out;
}
}
}
else {
/* Check for retry */
if (cmdiocb->retry < LPFC_MAX_NS_RETRY) {
retry = 1;
if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
switch (irsp->un.ulpWord[4]) {
case IOERR_NO_RESOURCES:
/* We don't increment the retry
* count for this case.
*/
break;
case IOERR_LINK_DOWN:
case IOERR_SLI_ABORTED:
case IOERR_SLI_DOWN:
retry = 0;
break;
default:
cmdiocb->retry++;
}
}
else
cmdiocb->retry++;
if (retry) {
/* CT command is being retried */
rc = lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID,
cmdiocb->retry, did);
if (rc == 0) {
/* success */
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
}
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0267 NameServer GFF Rsp "
"x%x Error (%d %d) Data: x%x x%x\n",
did, irsp->ulpStatus, irsp->un.ulpWord[4],
vport->fc_flag, vport->fc_rscn_id_cnt);
}
/* This is a target port, unregistered port, or the GFF_ID failed */
ndlp = lpfc_setup_disc_node(vport, did);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0242 Process x%x GFF "
"NameServer Rsp Data: x%x x%x x%x\n",
did, ndlp->nlp_flag, vport->fc_flag,
vport->fc_rscn_id_cnt);
} else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0243 Skip x%x GFF "
"NameServer Rsp Data: x%x x%x\n", did,
vport->fc_flag, vport->fc_rscn_id_cnt);
}
out:
/* Link up / RSCN discovery */
if (vport->num_disc_nodes)
vport->num_disc_nodes--;
if (vport->num_disc_nodes == 0) {
/*
* The driver has cycled through all Nports in the RSCN payload.
* Complete the handling by cleaning up and marking the
* current driver state.
*/
if (vport->port_state >= LPFC_DISC_AUTH) {
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_els_flush_rscn(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_MODE; /* RSCN still */
spin_unlock_irq(shost->host_lock);
}
else
lpfc_els_flush_rscn(vport);
}
lpfc_disc_start(vport);
}
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
static void
lpfc_cmpl_ct(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp;
struct lpfc_dmabuf *outp;
IOCB_t *irsp;
struct lpfc_sli_ct_request *CTrsp;
struct lpfc_nodelist *ndlp;
int cmdcode, rc;
uint8_t retry;
uint32_t latt;
/* First save ndlp, before we overwrite it */
ndlp = cmdiocb->context_un.ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->context_un.rsp_iocb = rspiocb;
inp = (struct lpfc_dmabuf *) cmdiocb->context1;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
irsp = &rspiocb->iocb;
cmdcode = be16_to_cpu(((struct lpfc_sli_ct_request *) inp->virt)->
CommandResponse.bits.CmdRsp);
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
latt = lpfc_els_chk_latt(vport);
/* RFT request completes status <ulpStatus> CmdRsp <CmdRsp> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0209 CT Request completes, latt %d, "
"ulpStatus x%x CmdRsp x%x, Context x%x, Tag x%x\n",
latt, irsp->ulpStatus,
CTrsp->CommandResponse.bits.CmdRsp,
cmdiocb->iocb.ulpContext, cmdiocb->iocb.ulpIoTag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"CT cmd cmpl: status:x%x/x%x cmd:x%x",
irsp->ulpStatus, irsp->un.ulpWord[4], cmdcode);
if (irsp->ulpStatus) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0268 NS cmd %x Error (%d %d)\n",
cmdcode, irsp->ulpStatus, irsp->un.ulpWord[4]);
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
((irsp->un.ulpWord[4] == IOERR_SLI_DOWN) ||
(irsp->un.ulpWord[4] == IOERR_SLI_ABORTED)))
goto out;
retry = cmdiocb->retry;
if (retry >= LPFC_MAX_NS_RETRY)
goto out;
retry++;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0250 Retrying NS cmd %x\n", cmdcode);
rc = lpfc_ns_cmd(vport, cmdcode, retry, 0);
if (rc == 0)
goto out;
}
out:
cmdiocb->context_un.ndlp = ndlp; /* Now restore ndlp for free */
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_vport *vport = cmdiocb->vport;
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC))
vport->ct_flags |= FC_CT_RFT_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rnn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_vport *vport = cmdiocb->vport;
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC))
vport->ct_flags |= FC_CT_RNN_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rspn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_vport *vport = cmdiocb->vport;
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC))
vport->ct_flags |= FC_CT_RSPN_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rsnn_nn(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_vport *vport = cmdiocb->vport;
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC))
vport->ct_flags |= FC_CT_RSNN_NN;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_da_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
/* even if it fails we will act as though it succeeded. */
vport->ct_flags = 0;
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_vport *vport = cmdiocb->vport;
if (irsp->ulpStatus == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = (struct lpfc_dmabuf *) cmdiocb->context2;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC))
vport->ct_flags |= FC_CT_RFF_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
int
lpfc_vport_symbolic_port_name(struct lpfc_vport *vport, char *symbol,
size_t size)
{
int n;
uint8_t *wwn = vport->phba->wwpn;
n = snprintf(symbol, size,
"Emulex PPN-%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
wwn[0], wwn[1], wwn[2], wwn[3],
wwn[4], wwn[5], wwn[6], wwn[7]);
if (vport->port_type == LPFC_PHYSICAL_PORT)
return n;
if (n < size)
n += snprintf(symbol + n, size - n, " VPort-%d", vport->vpi);
if (n < size &&
strlen(vport->fc_vport->symbolic_name))
n += snprintf(symbol + n, size - n, " VName-%s",
vport->fc_vport->symbolic_name);
return n;
}
int
lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol,
size_t size)
{
char fwrev[16];
int n;
lpfc_decode_firmware_rev(vport->phba, fwrev, 0);
n = snprintf(symbol, size, "Emulex %s FV%s DV%s",
vport->phba->ModelName, fwrev, lpfc_release_version);
return n;
}
/*
* lpfc_ns_cmd
* Description:
* Issue Cmd to NameServer
* SLI_CTNS_GID_FT
* LI_CTNS_RFT_ID
*/
int
lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
uint8_t retry, uint32_t context)
{
struct lpfc_nodelist * ndlp;
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *mp, *bmp;
struct lpfc_sli_ct_request *CtReq;
struct ulp_bde64 *bpl;
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *) = NULL;
uint32_t rsp_size = 1024;
size_t size;
int rc = 0;
ndlp = lpfc_findnode_did(vport, NameServer_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)
|| ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) {
rc=1;
goto ns_cmd_exit;
}
/* fill in BDEs for command */
/* Allocate buffer for command payload */
mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
rc=2;
goto ns_cmd_exit;
}
INIT_LIST_HEAD(&mp->list);
mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(mp->phys));
if (!mp->virt) {
rc=3;
goto ns_cmd_free_mp;
}
/* Allocate buffer for Buffer ptr list */
bmp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (!bmp) {
rc=4;
goto ns_cmd_free_mpvirt;
}
INIT_LIST_HEAD(&bmp->list);
bmp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(bmp->phys));
if (!bmp->virt) {
rc=5;
goto ns_cmd_free_bmp;
}
/* NameServer Req */
lpfc_printf_vlog(vport, KERN_INFO ,LOG_DISCOVERY,
"0236 NameServer Req Data: x%x x%x x%x\n",
cmdcode, vport->fc_flag, vport->fc_rscn_id_cnt);
bpl = (struct ulp_bde64 *) bmp->virt;
memset(bpl, 0, sizeof(struct ulp_bde64));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->tus.f.bdeFlags = 0;
if (cmdcode == SLI_CTNS_GID_FT)
bpl->tus.f.bdeSize = GID_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_GFF_ID)
bpl->tus.f.bdeSize = GFF_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RFT_ID)
bpl->tus.f.bdeSize = RFT_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RNN_ID)
bpl->tus.f.bdeSize = RNN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RSPN_ID)
bpl->tus.f.bdeSize = RSPN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RSNN_NN)
bpl->tus.f.bdeSize = RSNN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_DA_ID)
bpl->tus.f.bdeSize = DA_ID_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RFF_ID)
bpl->tus.f.bdeSize = RFF_REQUEST_SZ;
else
bpl->tus.f.bdeSize = 0;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
CtReq = (struct lpfc_sli_ct_request *) mp->virt;
memset(CtReq, 0, sizeof (struct lpfc_sli_ct_request));
CtReq->RevisionId.bits.Revision = SLI_CT_REVISION;
CtReq->RevisionId.bits.InId = 0;
CtReq->FsType = SLI_CT_DIRECTORY_SERVICE;
CtReq->FsSubType = SLI_CT_DIRECTORY_NAME_SERVER;
CtReq->CommandResponse.bits.Size = 0;
switch (cmdcode) {
case SLI_CTNS_GID_FT:
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_GID_FT);
CtReq->un.gid.Fc4Type = SLI_CTPT_FCP;
if (vport->port_state < LPFC_NS_QRY)
vport->port_state = LPFC_NS_QRY;
lpfc_set_disctmo(vport);
cmpl = lpfc_cmpl_ct_cmd_gid_ft;
rsp_size = FC_MAX_NS_RSP;
break;
case SLI_CTNS_GFF_ID:
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_GFF_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.gff.PortId = cpu_to_be32(context);
cmpl = lpfc_cmpl_ct_cmd_gff_id;
break;
case SLI_CTNS_RFT_ID:
vport->ct_flags &= ~FC_CT_RFT_ID;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_RFT_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rft.PortId = cpu_to_be32(vport->fc_myDID);
CtReq->un.rft.fcpReg = 1;
cmpl = lpfc_cmpl_ct_cmd_rft_id;
break;
case SLI_CTNS_RNN_ID:
vport->ct_flags &= ~FC_CT_RNN_ID;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_RNN_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rnn.PortId = cpu_to_be32(vport->fc_myDID);
memcpy(CtReq->un.rnn.wwnn, &vport->fc_nodename,
sizeof (struct lpfc_name));
cmpl = lpfc_cmpl_ct_cmd_rnn_id;
break;
case SLI_CTNS_RSPN_ID:
vport->ct_flags &= ~FC_CT_RSPN_ID;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_RSPN_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rspn.PortId = cpu_to_be32(vport->fc_myDID);
size = sizeof(CtReq->un.rspn.symbname);
CtReq->un.rspn.len =
lpfc_vport_symbolic_port_name(vport,
CtReq->un.rspn.symbname, size);
cmpl = lpfc_cmpl_ct_cmd_rspn_id;
break;
case SLI_CTNS_RSNN_NN:
vport->ct_flags &= ~FC_CT_RSNN_NN;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_RSNN_NN);
memcpy(CtReq->un.rsnn.wwnn, &vport->fc_nodename,
sizeof (struct lpfc_name));
size = sizeof(CtReq->un.rsnn.symbname);
CtReq->un.rsnn.len =
lpfc_vport_symbolic_node_name(vport,
CtReq->un.rsnn.symbname, size);
cmpl = lpfc_cmpl_ct_cmd_rsnn_nn;
break;
case SLI_CTNS_DA_ID:
/* Implement DA_ID Nameserver request */
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_DA_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.da_id.port_id = cpu_to_be32(vport->fc_myDID);
cmpl = lpfc_cmpl_ct_cmd_da_id;
break;
case SLI_CTNS_RFF_ID:
vport->ct_flags &= ~FC_CT_RFF_ID;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_CTNS_RFF_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rff.PortId = cpu_to_be32(vport->fc_myDID);;
CtReq->un.rff.fbits = FC4_FEATURE_INIT;
CtReq->un.rff.type_code = FC_FCP_DATA;
cmpl = lpfc_cmpl_ct_cmd_rff_id;
break;
}
/* The lpfc_ct_cmd/lpfc_get_req shall increment ndlp reference count
* to hold ndlp reference for the corresponding callback function.
*/
if (!lpfc_ct_cmd(vport, mp, bmp, ndlp, cmpl, rsp_size, retry)) {
/* On success, The cmpl function will free the buffers */
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Issue CT cmd: cmd:x%x did:x%x",
cmdcode, ndlp->nlp_DID, 0);
return 0;
}
rc=6;
/* Decrement ndlp reference count to release ndlp reference held
* for the failed command's callback function.
*/
lpfc_nlp_put(ndlp);
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
ns_cmd_free_bmp:
kfree(bmp);
ns_cmd_free_mpvirt:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
ns_cmd_free_mp:
kfree(mp);
ns_cmd_exit:
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0266 Issue NameServer Req x%x err %d Data: x%x x%x\n",
cmdcode, rc, vport->fc_flag, vport->fc_rscn_id_cnt);
return 1;
}
static void
lpfc_cmpl_ct_cmd_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq * rspiocb)
{
struct lpfc_dmabuf *inp = cmdiocb->context1;
struct lpfc_dmabuf *outp = cmdiocb->context2;
struct lpfc_sli_ct_request *CTrsp = outp->virt;
struct lpfc_sli_ct_request *CTcmd = inp->virt;
struct lpfc_nodelist *ndlp;
uint16_t fdmi_cmd = CTcmd->CommandResponse.bits.CmdRsp;
uint16_t fdmi_rsp = CTrsp->CommandResponse.bits.CmdRsp;
struct lpfc_vport *vport = cmdiocb->vport;
IOCB_t *irsp = &rspiocb->iocb;
uint32_t latt;
latt = lpfc_els_chk_latt(vport);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"FDMI cmpl: status:x%x/x%x latt:%d",
irsp->ulpStatus, irsp->un.ulpWord[4], latt);
if (latt || irsp->ulpStatus) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0229 FDMI cmd %04x failed, latt = %d "
"ulpStatus: x%x, rid x%x\n",
be16_to_cpu(fdmi_cmd), latt, irsp->ulpStatus,
irsp->un.ulpWord[4]);
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
ndlp = lpfc_findnode_did(vport, FDMI_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
goto fail_out;
if (fdmi_rsp == be16_to_cpu(SLI_CT_RESPONSE_FS_RJT)) {
/* FDMI rsp failed */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0220 FDMI rsp failed Data: x%x\n",
be16_to_cpu(fdmi_cmd));
}
switch (be16_to_cpu(fdmi_cmd)) {
case SLI_MGMT_RHBA:
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA);
break;
case SLI_MGMT_RPA:
break;
case SLI_MGMT_DHBA:
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT);
break;
case SLI_MGMT_DPRT:
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RHBA);
break;
}
fail_out:
lpfc_ct_free_iocb(phba, cmdiocb);
return;
}
int
lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *mp, *bmp;
struct lpfc_sli_ct_request *CtReq;
struct ulp_bde64 *bpl;
uint32_t size;
REG_HBA *rh;
PORT_ENTRY *pe;
REG_PORT_ATTRIBUTE *pab;
ATTRIBUTE_BLOCK *ab;
ATTRIBUTE_ENTRY *ae;
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
/* fill in BDEs for command */
/* Allocate buffer for command payload */
mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (!mp)
goto fdmi_cmd_exit;
mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys));
if (!mp->virt)
goto fdmi_cmd_free_mp;
/* Allocate buffer for Buffer ptr list */
bmp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (!bmp)
goto fdmi_cmd_free_mpvirt;
bmp->virt = lpfc_mbuf_alloc(phba, 0, &(bmp->phys));
if (!bmp->virt)
goto fdmi_cmd_free_bmp;
INIT_LIST_HEAD(&mp->list);
INIT_LIST_HEAD(&bmp->list);
/* FDMI request */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0218 FDMI Request Data: x%x x%x x%x\n",
vport->fc_flag, vport->port_state, cmdcode);
CtReq = (struct lpfc_sli_ct_request *) mp->virt;
memset(CtReq, 0, sizeof(struct lpfc_sli_ct_request));
CtReq->RevisionId.bits.Revision = SLI_CT_REVISION;
CtReq->RevisionId.bits.InId = 0;
CtReq->FsType = SLI_CT_MANAGEMENT_SERVICE;
CtReq->FsSubType = SLI_CT_FDMI_Subtypes;
size = 0;
switch (cmdcode) {
case SLI_MGMT_RHBA:
{
lpfc_vpd_t *vp = &phba->vpd;
uint32_t i, j, incr;
int len;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_MGMT_RHBA);
CtReq->CommandResponse.bits.Size = 0;
rh = (REG_HBA *) & CtReq->un.PortID;
memcpy(&rh->hi.PortName, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
/* One entry (port) per adapter */
rh->rpl.EntryCnt = be32_to_cpu(1);
memcpy(&rh->rpl.pe, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
/* point to the HBA attribute block */
size = 2 * sizeof (struct lpfc_name) + FOURBYTES;
ab = (ATTRIBUTE_BLOCK *) ((uint8_t *) rh + size);
ab->EntryCnt = 0;
/* Point to the beginning of the first HBA attribute
entry */
/* #1 HBA attribute entry */
size += FOURBYTES;
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(NODE_NAME);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES
+ sizeof (struct lpfc_name));
memcpy(&ae->un.NodeName, &vport->fc_sparam.nodeName,
sizeof (struct lpfc_name));
ab->EntryCnt++;
size += FOURBYTES + sizeof (struct lpfc_name);
/* #2 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(MANUFACTURER);
strcpy(ae->un.Manufacturer, "Emulex Corporation");
len = strlen(ae->un.Manufacturer);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #3 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(SERIAL_NUMBER);
strcpy(ae->un.SerialNumber, phba->SerialNumber);
len = strlen(ae->un.SerialNumber);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #4 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(MODEL);
strcpy(ae->un.Model, phba->ModelName);
len = strlen(ae->un.Model);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #5 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(MODEL_DESCRIPTION);
strcpy(ae->un.ModelDescription, phba->ModelDesc);
len = strlen(ae->un.ModelDescription);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #6 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(HARDWARE_VERSION);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 8);
/* Convert JEDEC ID to ascii for hardware version */
incr = vp->rev.biuRev;
for (i = 0; i < 8; i++) {
j = (incr & 0xf);
if (j <= 9)
ae->un.HardwareVersion[7 - i] =
(char)((uint8_t) 0x30 +
(uint8_t) j);
else
ae->un.HardwareVersion[7 - i] =
(char)((uint8_t) 0x61 +
(uint8_t) (j - 10));
incr = (incr >> 4);
}
ab->EntryCnt++;
size += FOURBYTES + 8;
/* #7 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(DRIVER_VERSION);
strcpy(ae->un.DriverVersion, lpfc_release_version);
len = strlen(ae->un.DriverVersion);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #8 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(OPTION_ROM_VERSION);
strcpy(ae->un.OptionROMVersion, phba->OptionROMVersion);
len = strlen(ae->un.OptionROMVersion);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #9 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(FIRMWARE_VERSION);
lpfc_decode_firmware_rev(phba, ae->un.FirmwareVersion,
1);
len = strlen(ae->un.FirmwareVersion);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #10 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(OS_NAME_VERSION);
sprintf(ae->un.OsNameVersion, "%s %s %s",
init_utsname()->sysname,
init_utsname()->release,
init_utsname()->version);
len = strlen(ae->un.OsNameVersion);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
ab->EntryCnt++;
size += FOURBYTES + len;
/* #11 HBA attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) rh + size);
ae->ad.bits.AttrType = be16_to_cpu(MAX_CT_PAYLOAD_LEN);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
ae->un.MaxCTPayloadLen = (65 * 4096);
ab->EntryCnt++;
size += FOURBYTES + 4;
ab->EntryCnt = be32_to_cpu(ab->EntryCnt);
/* Total size */
size = GID_REQUEST_SZ - 4 + size;
}
break;
case SLI_MGMT_RPA:
{
lpfc_vpd_t *vp;
struct serv_parm *hsp;
int len;
vp = &phba->vpd;
CtReq->CommandResponse.bits.CmdRsp =
be16_to_cpu(SLI_MGMT_RPA);
CtReq->CommandResponse.bits.Size = 0;
pab = (REG_PORT_ATTRIBUTE *) & CtReq->un.PortID;
size = sizeof (struct lpfc_name) + FOURBYTES;
memcpy((uint8_t *) & pab->PortName,
(uint8_t *) & vport->fc_sparam.portName,
sizeof (struct lpfc_name));
pab->ab.EntryCnt = 0;
/* #1 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size);
ae->ad.bits.AttrType = be16_to_cpu(SUPPORTED_FC4_TYPES);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 32);
ae->un.SupportFC4Types[2] = 1;
ae->un.SupportFC4Types[7] = 1;
pab->ab.EntryCnt++;
size += FOURBYTES + 32;
/* #2 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size);
ae->ad.bits.AttrType = be16_to_cpu(SUPPORTED_SPEED);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
ae->un.SupportSpeed = 0;
if (phba->lmt & LMT_10Gb)
ae->un.SupportSpeed = HBA_PORTSPEED_10GBIT;
if (phba->lmt & LMT_8Gb)
ae->un.SupportSpeed |= HBA_PORTSPEED_8GBIT;
if (phba->lmt & LMT_4Gb)
ae->un.SupportSpeed |= HBA_PORTSPEED_4GBIT;
if (phba->lmt & LMT_2Gb)
ae->un.SupportSpeed |= HBA_PORTSPEED_2GBIT;
if (phba->lmt & LMT_1Gb)
ae->un.SupportSpeed |= HBA_PORTSPEED_1GBIT;
pab->ab.EntryCnt++;
size += FOURBYTES + 4;
/* #3 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size);
ae->ad.bits.AttrType = be16_to_cpu(PORT_SPEED);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
switch(phba->fc_linkspeed) {
case LA_1GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
break;
case LA_2GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
break;
case LA_4GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
break;
case LA_8GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
break;
case LA_10GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
break;
default:
ae->un.PortSpeed =
HBA_PORTSPEED_UNKNOWN;
break;
}
pab->ab.EntryCnt++;
size += FOURBYTES + 4;
/* #4 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size);
ae->ad.bits.AttrType = be16_to_cpu(MAX_FRAME_SIZE);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
hsp = (struct serv_parm *) & vport->fc_sparam;
ae->un.MaxFrameSize =
(((uint32_t) hsp->cmn.
bbRcvSizeMsb) << 8) | (uint32_t) hsp->cmn.
bbRcvSizeLsb;
pab->ab.EntryCnt++;
size += FOURBYTES + 4;
/* #5 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab + size);
ae->ad.bits.AttrType = be16_to_cpu(OS_DEVICE_NAME);
strcpy((char *)ae->un.OsDeviceName, LPFC_DRIVER_NAME);
len = strlen((char *)ae->un.OsDeviceName);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + len);
pab->ab.EntryCnt++;
size += FOURBYTES + len;
if (vport->cfg_fdmi_on == 2) {
/* #6 Port attribute entry */
ae = (ATTRIBUTE_ENTRY *) ((uint8_t *) pab +
size);
ae->ad.bits.AttrType = be16_to_cpu(HOST_NAME);
sprintf(ae->un.HostName, "%s",
init_utsname()->nodename);
len = strlen(ae->un.HostName);
len += (len & 3) ? (4 - (len & 3)) : 4;
ae->ad.bits.AttrLen =
be16_to_cpu(FOURBYTES + len);
pab->ab.EntryCnt++;
size += FOURBYTES + len;
}
pab->ab.EntryCnt = be32_to_cpu(pab->ab.EntryCnt);
/* Total size */
size = GID_REQUEST_SZ - 4 + size;
}
break;
case SLI_MGMT_DHBA:
CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_MGMT_DHBA);
CtReq->CommandResponse.bits.Size = 0;
pe = (PORT_ENTRY *) & CtReq->un.PortID;
memcpy((uint8_t *) & pe->PortName,
(uint8_t *) & vport->fc_sparam.portName,
sizeof (struct lpfc_name));
size = GID_REQUEST_SZ - 4 + sizeof (struct lpfc_name);
break;
case SLI_MGMT_DPRT:
CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_MGMT_DPRT);
CtReq->CommandResponse.bits.Size = 0;
pe = (PORT_ENTRY *) & CtReq->un.PortID;
memcpy((uint8_t *) & pe->PortName,
(uint8_t *) & vport->fc_sparam.portName,
sizeof (struct lpfc_name));
size = GID_REQUEST_SZ - 4 + sizeof (struct lpfc_name);
break;
}
bpl = (struct ulp_bde64 *) bmp->virt;
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->tus.f.bdeFlags = 0;
bpl->tus.f.bdeSize = size;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
cmpl = lpfc_cmpl_ct_cmd_fdmi;
/* The lpfc_ct_cmd/lpfc_get_req shall increment ndlp reference count
* to hold ndlp reference for the corresponding callback function.
*/
if (!lpfc_ct_cmd(vport, mp, bmp, ndlp, cmpl, FC_MAX_NS_RSP, 0))
return 0;
/* Decrement ndlp reference count to release ndlp reference held
* for the failed command's callback function.
*/
lpfc_nlp_put(ndlp);
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
fdmi_cmd_free_bmp:
kfree(bmp);
fdmi_cmd_free_mpvirt:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
fdmi_cmd_free_mp:
kfree(mp);
fdmi_cmd_exit:
/* Issue FDMI request failed */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0244 Issue FDMI request failed Data: x%x\n",
cmdcode);
return 1;
}
void
lpfc_fdmi_tmo(unsigned long ptr)
{
struct lpfc_vport *vport = (struct lpfc_vport *)ptr;
struct lpfc_hba *phba = vport->phba;
uint32_t tmo_posted;
unsigned long iflag;
spin_lock_irqsave(&vport->work_port_lock, iflag);
tmo_posted = vport->work_port_events & WORKER_FDMI_TMO;
if (!tmo_posted)
vport->work_port_events |= WORKER_FDMI_TMO;
spin_unlock_irqrestore(&vport->work_port_lock, iflag);
if (!tmo_posted)
lpfc_worker_wake_up(phba);
return;
}
void
lpfc_fdmi_timeout_handler(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp;
ndlp = lpfc_findnode_did(vport, FDMI_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
if (init_utsname()->nodename[0] != '\0')
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
else
mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60);
}
return;
}
void
lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
{
struct lpfc_sli *psli = &phba->sli;
lpfc_vpd_t *vp = &phba->vpd;
uint32_t b1, b2, b3, b4, i, rev;
char c;
uint32_t *ptr, str[4];
uint8_t *fwname;
if (phba->sli_rev == LPFC_SLI_REV4)
sprintf(fwrevision, "%s", vp->rev.opFwName);
else if (vp->rev.rBit) {
if (psli->sli_flag & LPFC_SLI_ACTIVE)
rev = vp->rev.sli2FwRev;
else
rev = vp->rev.sli1FwRev;
b1 = (rev & 0x0000f000) >> 12;
b2 = (rev & 0x00000f00) >> 8;
b3 = (rev & 0x000000c0) >> 6;
b4 = (rev & 0x00000030) >> 4;
switch (b4) {
case 0:
c = 'N';
break;
case 1:
c = 'A';
break;
case 2:
c = 'B';
break;
default:
c = 0;
break;
}
b4 = (rev & 0x0000000f);
if (psli->sli_flag & LPFC_SLI_ACTIVE)
fwname = vp->rev.sli2FwName;
else
fwname = vp->rev.sli1FwName;
for (i = 0; i < 16; i++)
if (fwname[i] == 0x20)
fwname[i] = 0;
ptr = (uint32_t*)fwname;
for (i = 0; i < 3; i++)
str[i] = be32_to_cpu(*ptr++);
if (c == 0) {
if (flag)
sprintf(fwrevision, "%d.%d%d (%s)",
b1, b2, b3, (char *)str);
else
sprintf(fwrevision, "%d.%d%d", b1,
b2, b3);
} else {
if (flag)
sprintf(fwrevision, "%d.%d%d%c%d (%s)",
b1, b2, b3, c,
b4, (char *)str);
else
sprintf(fwrevision, "%d.%d%d%c%d",
b1, b2, b3, c, b4);
}
} else {
rev = vp->rev.smFwRev;
b1 = (rev & 0xff000000) >> 24;
b2 = (rev & 0x00f00000) >> 20;
b3 = (rev & 0x000f0000) >> 16;
c = (rev & 0x0000ff00) >> 8;
b4 = (rev & 0x000000ff);
if (flag)
sprintf(fwrevision, "%d.%d%d%c%d ", b1,
b2, b3, c, b4);
else
sprintf(fwrevision, "%d.%d%d%c%d ", b1,
b2, b3, c, b4);
}
return;
}