OpenCloudOS-Kernel/drivers/regulator/wm8994-regulator.c

304 lines
7.1 KiB
C
Raw Normal View History

/*
* wm8994-regulator.c -- Regulator driver for the WM8994
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/gpio.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/mfd/wm8994/pdata.h>
struct wm8994_ldo {
int enable;
bool is_enabled;
struct regulator_dev *regulator;
struct wm8994 *wm8994;
};
#define WM8994_LDO1_MAX_SELECTOR 0x7
#define WM8994_LDO2_MAX_SELECTOR 0x3
static int wm8994_ldo_enable(struct regulator_dev *rdev)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
/* If we have no soft control assume that the LDO is always enabled. */
if (!ldo->enable)
return 0;
gpio_set_value_cansleep(ldo->enable, 1);
ldo->is_enabled = true;
return 0;
}
static int wm8994_ldo_disable(struct regulator_dev *rdev)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
/* If we have no soft control assume that the LDO is always enabled. */
if (!ldo->enable)
return -EINVAL;
gpio_set_value_cansleep(ldo->enable, 0);
ldo->is_enabled = false;
return 0;
}
static int wm8994_ldo_is_enabled(struct regulator_dev *rdev)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
return ldo->is_enabled;
}
static int wm8994_ldo_enable_time(struct regulator_dev *rdev)
{
/* 3ms is fairly conservative but this shouldn't be too performance
* critical; can be tweaked per-system if required. */
return 3000;
}
static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector > WM8994_LDO1_MAX_SELECTOR)
return -EINVAL;
return (selector * 100000) + 2400000;
}
static int wm8994_ldo1_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
int val;
val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_1);
if (val < 0)
return val;
return (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT;
}
static int wm8994_ldo1_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
selector <<= WM8994_LDO1_VSEL_SHIFT;
return wm8994_set_bits(ldo->wm8994, WM8994_LDO_1,
WM8994_LDO1_VSEL_MASK, selector);
}
static struct regulator_ops wm8994_ldo1_ops = {
.enable = wm8994_ldo_enable,
.disable = wm8994_ldo_disable,
.is_enabled = wm8994_ldo_is_enabled,
.enable_time = wm8994_ldo_enable_time,
.list_voltage = wm8994_ldo1_list_voltage,
.get_voltage_sel = wm8994_ldo1_get_voltage_sel,
.set_voltage_sel = wm8994_ldo1_set_voltage_sel,
};
static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
if (selector > WM8994_LDO2_MAX_SELECTOR)
return -EINVAL;
switch (ldo->wm8994->type) {
case WM8994:
return (selector * 100000) + 900000;
case WM8958:
return (selector * 100000) + 1000000;
case WM1811:
switch (selector) {
case 0:
return -EINVAL;
default:
return (selector * 100000) + 950000;
}
break;
default:
return -EINVAL;
}
}
static int wm8994_ldo2_get_voltage_sel(struct regulator_dev *rdev)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
int val;
val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_2);
if (val < 0)
return val;
return (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT;
}
static int wm8994_ldo2_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);
selector <<= WM8994_LDO2_VSEL_SHIFT;
return wm8994_set_bits(ldo->wm8994, WM8994_LDO_2,
WM8994_LDO2_VSEL_MASK, selector);
}
static struct regulator_ops wm8994_ldo2_ops = {
.enable = wm8994_ldo_enable,
.disable = wm8994_ldo_disable,
.is_enabled = wm8994_ldo_is_enabled,
.enable_time = wm8994_ldo_enable_time,
.list_voltage = wm8994_ldo2_list_voltage,
.get_voltage_sel = wm8994_ldo2_get_voltage_sel,
.set_voltage_sel = wm8994_ldo2_set_voltage_sel,
};
static const struct regulator_desc wm8994_ldo_desc[] = {
{
.name = "LDO1",
.id = 1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
.ops = &wm8994_ldo1_ops,
.owner = THIS_MODULE,
},
{
.name = "LDO2",
.id = 2,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
.ops = &wm8994_ldo2_ops,
.owner = THIS_MODULE,
},
};
static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
{
struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
int id = pdev->id % ARRAY_SIZE(pdata->ldo);
struct regulator_config config = { };
struct wm8994_ldo *ldo;
int ret;
dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
if (!pdata)
return -ENODEV;
ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm8994_ldo), GFP_KERNEL);
if (ldo == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
ldo->wm8994 = wm8994;
if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
ldo->enable = pdata->ldo[id].enable;
ret = gpio_request_one(ldo->enable, 0, "WM8994 LDO enable");
if (ret < 0) {
dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n",
ret);
goto err;
}
} else
ldo->is_enabled = true;
config.dev = &pdev->dev;
config.init_data = pdata->ldo[id].init_data;
config.driver_data = ldo;
ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &config);
if (IS_ERR(ldo->regulator)) {
ret = PTR_ERR(ldo->regulator);
dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",
id + 1, ret);
goto err_gpio;
}
platform_set_drvdata(pdev, ldo);
return 0;
err_gpio:
if (gpio_is_valid(ldo->enable))
gpio_free(ldo->enable);
err:
return ret;
}
static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
{
struct wm8994_ldo *ldo = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
regulator_unregister(ldo->regulator);
if (gpio_is_valid(ldo->enable))
gpio_free(ldo->enable);
return 0;
}
static struct platform_driver wm8994_ldo_driver = {
.probe = wm8994_ldo_probe,
.remove = __devexit_p(wm8994_ldo_remove),
.driver = {
.name = "wm8994-ldo",
.owner = THIS_MODULE,
},
};
static int __init wm8994_ldo_init(void)
{
int ret;
ret = platform_driver_register(&wm8994_ldo_driver);
if (ret != 0)
pr_err("Failed to register Wm8994 GP LDO driver: %d\n", ret);
return ret;
}
subsys_initcall(wm8994_ldo_init);
static void __exit wm8994_ldo_exit(void)
{
platform_driver_unregister(&wm8994_ldo_driver);
}
module_exit(wm8994_ldo_exit);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM8994 LDO driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8994-ldo");