OpenCloudOS-Kernel/drivers/vfio/fsl-mc/vfio_fsl_mc.c

608 lines
15 KiB
C
Raw Normal View History

vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright 2013-2016 Freescale Semiconductor Inc.
* Copyright 2016-2017,2019-2020 NXP
*/
#include <linux/device.h>
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/vfio.h>
#include <linux/fsl/mc.h>
#include <linux/delay.h>
#include <linux/io-64-nonatomic-hi-lo.h>
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
#include "vfio_fsl_mc_private.h"
static struct fsl_mc_driver vfio_fsl_mc_driver;
static int vfio_fsl_mc_open_device(struct vfio_device *core_vdev)
{
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
struct fsl_mc_device *mc_dev = vdev->mc_dev;
int count = mc_dev->obj_desc.region_count;
int i;
vdev->regions = kcalloc(count, sizeof(struct vfio_fsl_mc_region),
GFP_KERNEL);
if (!vdev->regions)
return -ENOMEM;
for (i = 0; i < count; i++) {
struct resource *res = &mc_dev->regions[i];
int no_mmap = is_fsl_mc_bus_dprc(mc_dev);
vdev->regions[i].addr = res->start;
vdev->regions[i].size = resource_size(res);
vdev->regions[i].type = mc_dev->regions[i].flags & IORESOURCE_BITS;
/*
* Only regions addressed with PAGE granularity may be
* MMAPed securely.
*/
if (!no_mmap && !(vdev->regions[i].addr & ~PAGE_MASK) &&
!(vdev->regions[i].size & ~PAGE_MASK))
vdev->regions[i].flags |=
VFIO_REGION_INFO_FLAG_MMAP;
vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_READ;
if (!(mc_dev->regions[i].flags & IORESOURCE_READONLY))
vdev->regions[i].flags |= VFIO_REGION_INFO_FLAG_WRITE;
}
return 0;
}
static void vfio_fsl_mc_regions_cleanup(struct vfio_fsl_mc_device *vdev)
{
struct fsl_mc_device *mc_dev = vdev->mc_dev;
int i;
for (i = 0; i < mc_dev->obj_desc.region_count; i++)
iounmap(vdev->regions[i].ioaddr);
kfree(vdev->regions);
}
static int vfio_fsl_mc_reset_device(struct vfio_fsl_mc_device *vdev)
{
struct fsl_mc_device *mc_dev = vdev->mc_dev;
int ret = 0;
if (is_fsl_mc_bus_dprc(vdev->mc_dev)) {
return dprc_reset_container(mc_dev->mc_io, 0,
mc_dev->mc_handle,
mc_dev->obj_desc.id,
DPRC_RESET_OPTION_NON_RECURSIVE);
} else {
u16 token;
ret = fsl_mc_obj_open(mc_dev->mc_io, 0, mc_dev->obj_desc.id,
mc_dev->obj_desc.type,
&token);
if (ret)
goto out;
ret = fsl_mc_obj_reset(mc_dev->mc_io, 0, token);
if (ret) {
fsl_mc_obj_close(mc_dev->mc_io, 0, token);
goto out;
}
ret = fsl_mc_obj_close(mc_dev->mc_io, 0, token);
}
out:
return ret;
}
static void vfio_fsl_mc_close_device(struct vfio_device *core_vdev)
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
{
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
struct fsl_mc_device *mc_dev = vdev->mc_dev;
struct device *cont_dev = fsl_mc_cont_dev(&mc_dev->dev);
struct fsl_mc_device *mc_cont = to_fsl_mc_device(cont_dev);
int ret;
vfio_fsl_mc_regions_cleanup(vdev);
/* reset the device before cleaning up the interrupts */
ret = vfio_fsl_mc_reset_device(vdev);
if (WARN_ON(ret))
dev_warn(&mc_cont->dev,
"VFIO_FLS_MC: reset device has failed (%d)\n", ret);
vfio_fsl_mc_irqs_cleanup(vdev);
fsl_mc_cleanup_irq_pool(mc_cont);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
static long vfio_fsl_mc_ioctl(struct vfio_device *core_vdev,
unsigned int cmd, unsigned long arg)
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
{
unsigned long minsz;
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
struct fsl_mc_device *mc_dev = vdev->mc_dev;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
switch (cmd) {
case VFIO_DEVICE_GET_INFO:
{
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_FSL_MC;
if (is_fsl_mc_bus_dprc(mc_dev))
info.flags |= VFIO_DEVICE_FLAGS_RESET;
info.num_regions = mc_dev->obj_desc.region_count;
info.num_irqs = mc_dev->obj_desc.irq_count;
return copy_to_user((void __user *)arg, &info, minsz) ?
-EFAULT : 0;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
case VFIO_DEVICE_GET_REGION_INFO:
{
struct vfio_region_info info;
minsz = offsetofend(struct vfio_region_info, offset);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
if (info.index >= mc_dev->obj_desc.region_count)
return -EINVAL;
/* map offset to the physical address */
info.offset = VFIO_FSL_MC_INDEX_TO_OFFSET(info.index);
info.size = vdev->regions[info.index].size;
info.flags = vdev->regions[info.index].flags;
if (copy_to_user((void __user *)arg, &info, minsz))
return -EFAULT;
return 0;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
case VFIO_DEVICE_GET_IRQ_INFO:
{
struct vfio_irq_info info;
minsz = offsetofend(struct vfio_irq_info, count);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
if (info.index >= mc_dev->obj_desc.irq_count)
return -EINVAL;
info.flags = VFIO_IRQ_INFO_EVENTFD;
info.count = 1;
if (copy_to_user((void __user *)arg, &info, minsz))
return -EFAULT;
return 0;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
case VFIO_DEVICE_SET_IRQS:
{
struct vfio_irq_set hdr;
u8 *data = NULL;
int ret = 0;
size_t data_size = 0;
minsz = offsetofend(struct vfio_irq_set, count);
if (copy_from_user(&hdr, (void __user *)arg, minsz))
return -EFAULT;
ret = vfio_set_irqs_validate_and_prepare(&hdr, mc_dev->obj_desc.irq_count,
mc_dev->obj_desc.irq_count, &data_size);
if (ret)
return ret;
if (data_size) {
data = memdup_user((void __user *)(arg + minsz),
data_size);
if (IS_ERR(data))
return PTR_ERR(data);
}
mutex_lock(&vdev->igate);
ret = vfio_fsl_mc_set_irqs_ioctl(vdev, hdr.flags,
hdr.index, hdr.start,
hdr.count, data);
mutex_unlock(&vdev->igate);
kfree(data);
return ret;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
case VFIO_DEVICE_RESET:
{
return vfio_fsl_mc_reset_device(vdev);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
default:
return -ENOTTY;
}
}
static ssize_t vfio_fsl_mc_read(struct vfio_device *core_vdev, char __user *buf,
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
size_t count, loff_t *ppos)
{
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
unsigned int index = VFIO_FSL_MC_OFFSET_TO_INDEX(*ppos);
loff_t off = *ppos & VFIO_FSL_MC_OFFSET_MASK;
struct fsl_mc_device *mc_dev = vdev->mc_dev;
struct vfio_fsl_mc_region *region;
u64 data[8];
int i;
if (index >= mc_dev->obj_desc.region_count)
return -EINVAL;
region = &vdev->regions[index];
if (!(region->flags & VFIO_REGION_INFO_FLAG_READ))
return -EINVAL;
if (!region->ioaddr) {
region->ioaddr = ioremap(region->addr, region->size);
if (!region->ioaddr)
return -ENOMEM;
}
if (count != 64 || off != 0)
return -EINVAL;
for (i = 7; i >= 0; i--)
data[i] = readq(region->ioaddr + i * sizeof(uint64_t));
if (copy_to_user(buf, data, 64))
return -EFAULT;
return count;
}
#define MC_CMD_COMPLETION_TIMEOUT_MS 5000
#define MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS 500
static int vfio_fsl_mc_send_command(void __iomem *ioaddr, uint64_t *cmd_data)
{
int i;
enum mc_cmd_status status;
unsigned long timeout_usecs = MC_CMD_COMPLETION_TIMEOUT_MS * 1000;
/* Write at command parameter into portal */
for (i = 7; i >= 1; i--)
writeq_relaxed(cmd_data[i], ioaddr + i * sizeof(uint64_t));
/* Write command header in the end */
writeq(cmd_data[0], ioaddr);
/* Wait for response before returning to user-space
* This can be optimized in future to even prepare response
* before returning to user-space and avoid read ioctl.
*/
for (;;) {
u64 header;
struct mc_cmd_header *resp_hdr;
header = cpu_to_le64(readq_relaxed(ioaddr));
resp_hdr = (struct mc_cmd_header *)&header;
status = (enum mc_cmd_status)resp_hdr->status;
if (status != MC_CMD_STATUS_READY)
break;
udelay(MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS);
timeout_usecs -= MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS;
if (timeout_usecs == 0)
return -ETIMEDOUT;
}
return 0;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
static ssize_t vfio_fsl_mc_write(struct vfio_device *core_vdev,
const char __user *buf, size_t count,
loff_t *ppos)
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
{
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
unsigned int index = VFIO_FSL_MC_OFFSET_TO_INDEX(*ppos);
loff_t off = *ppos & VFIO_FSL_MC_OFFSET_MASK;
struct fsl_mc_device *mc_dev = vdev->mc_dev;
struct vfio_fsl_mc_region *region;
u64 data[8];
int ret;
if (index >= mc_dev->obj_desc.region_count)
return -EINVAL;
region = &vdev->regions[index];
if (!(region->flags & VFIO_REGION_INFO_FLAG_WRITE))
return -EINVAL;
if (!region->ioaddr) {
region->ioaddr = ioremap(region->addr, region->size);
if (!region->ioaddr)
return -ENOMEM;
}
if (count != 64 || off != 0)
return -EINVAL;
if (copy_from_user(&data, buf, 64))
return -EFAULT;
ret = vfio_fsl_mc_send_command(region->ioaddr, data);
if (ret)
return ret;
return count;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
static int vfio_fsl_mc_mmap_mmio(struct vfio_fsl_mc_region region,
struct vm_area_struct *vma)
{
u64 size = vma->vm_end - vma->vm_start;
u64 pgoff, base;
u8 region_cacheable;
pgoff = vma->vm_pgoff &
((1U << (VFIO_FSL_MC_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
base = pgoff << PAGE_SHIFT;
if (region.size < PAGE_SIZE || base + size > region.size)
return -EINVAL;
region_cacheable = (region.type & FSL_MC_REGION_CACHEABLE) &&
(region.type & FSL_MC_REGION_SHAREABLE);
if (!region_cacheable)
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
vma->vm_pgoff = (region.addr >> PAGE_SHIFT) + pgoff;
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
size, vma->vm_page_prot);
}
static int vfio_fsl_mc_mmap(struct vfio_device *core_vdev,
struct vm_area_struct *vma)
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
{
struct vfio_fsl_mc_device *vdev =
container_of(core_vdev, struct vfio_fsl_mc_device, vdev);
struct fsl_mc_device *mc_dev = vdev->mc_dev;
unsigned int index;
index = vma->vm_pgoff >> (VFIO_FSL_MC_OFFSET_SHIFT - PAGE_SHIFT);
if (vma->vm_end < vma->vm_start)
return -EINVAL;
if (vma->vm_start & ~PAGE_MASK)
return -EINVAL;
if (vma->vm_end & ~PAGE_MASK)
return -EINVAL;
if (!(vma->vm_flags & VM_SHARED))
return -EINVAL;
if (index >= mc_dev->obj_desc.region_count)
return -EINVAL;
if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_MMAP))
return -EINVAL;
if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_READ)
&& (vma->vm_flags & VM_READ))
return -EINVAL;
if (!(vdev->regions[index].flags & VFIO_REGION_INFO_FLAG_WRITE)
&& (vma->vm_flags & VM_WRITE))
return -EINVAL;
vma->vm_private_data = mc_dev;
return vfio_fsl_mc_mmap_mmio(vdev->regions[index], vma);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
}
static const struct vfio_device_ops vfio_fsl_mc_ops = {
.name = "vfio-fsl-mc",
.open_device = vfio_fsl_mc_open_device,
.close_device = vfio_fsl_mc_close_device,
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
.ioctl = vfio_fsl_mc_ioctl,
.read = vfio_fsl_mc_read,
.write = vfio_fsl_mc_write,
.mmap = vfio_fsl_mc_mmap,
};
static int vfio_fsl_mc_bus_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct vfio_fsl_mc_device *vdev = container_of(nb,
struct vfio_fsl_mc_device, nb);
struct device *dev = data;
struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev);
struct fsl_mc_device *mc_cont = to_fsl_mc_device(mc_dev->dev.parent);
if (action == BUS_NOTIFY_ADD_DEVICE &&
vdev->mc_dev == mc_cont) {
mc_dev->driver_override = kasprintf(GFP_KERNEL, "%s",
vfio_fsl_mc_ops.name);
if (!mc_dev->driver_override)
dev_warn(dev, "VFIO_FSL_MC: Setting driver override for device in dprc %s failed\n",
dev_name(&mc_cont->dev));
else
dev_info(dev, "VFIO_FSL_MC: Setting driver override for device in dprc %s\n",
dev_name(&mc_cont->dev));
} else if (action == BUS_NOTIFY_BOUND_DRIVER &&
vdev->mc_dev == mc_cont) {
struct fsl_mc_driver *mc_drv = to_fsl_mc_driver(dev->driver);
if (mc_drv && mc_drv != &vfio_fsl_mc_driver)
dev_warn(dev, "VFIO_FSL_MC: Object %s bound to driver %s while DPRC bound to vfio-fsl-mc\n",
dev_name(dev), mc_drv->driver.name);
}
return 0;
}
static int vfio_fsl_mc_init_device(struct vfio_fsl_mc_device *vdev)
{
struct fsl_mc_device *mc_dev = vdev->mc_dev;
int ret;
/* Non-dprc devices share mc_io from parent */
if (!is_fsl_mc_bus_dprc(mc_dev)) {
struct fsl_mc_device *mc_cont = to_fsl_mc_device(mc_dev->dev.parent);
mc_dev->mc_io = mc_cont->mc_io;
return 0;
}
vdev->nb.notifier_call = vfio_fsl_mc_bus_notifier;
ret = bus_register_notifier(&fsl_mc_bus_type, &vdev->nb);
if (ret)
return ret;
/* open DPRC, allocate a MC portal */
ret = dprc_setup(mc_dev);
if (ret) {
dev_err(&mc_dev->dev, "VFIO_FSL_MC: Failed to setup DPRC (%d)\n", ret);
goto out_nc_unreg;
}
return 0;
out_nc_unreg:
bus_unregister_notifier(&fsl_mc_bus_type, &vdev->nb);
return ret;
}
static int vfio_fsl_mc_scan_container(struct fsl_mc_device *mc_dev)
{
int ret;
/* non dprc devices do not scan for other devices */
if (!is_fsl_mc_bus_dprc(mc_dev))
return 0;
ret = dprc_scan_container(mc_dev, false);
if (ret) {
dev_err(&mc_dev->dev,
"VFIO_FSL_MC: Container scanning failed (%d)\n", ret);
dprc_remove_devices(mc_dev, NULL, 0);
return ret;
}
return 0;
}
static void vfio_fsl_uninit_device(struct vfio_fsl_mc_device *vdev)
{
struct fsl_mc_device *mc_dev = vdev->mc_dev;
if (!is_fsl_mc_bus_dprc(mc_dev))
return;
dprc_cleanup(mc_dev);
bus_unregister_notifier(&fsl_mc_bus_type, &vdev->nb);
}
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
static int vfio_fsl_mc_probe(struct fsl_mc_device *mc_dev)
{
struct vfio_fsl_mc_device *vdev;
struct device *dev = &mc_dev->dev;
int ret;
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev)
return -ENOMEM;
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
vfio_init_group_dev(&vdev->vdev, dev, &vfio_fsl_mc_ops);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
vdev->mc_dev = mc_dev;
mutex_init(&vdev->igate);
if (is_fsl_mc_bus_dprc(mc_dev))
ret = vfio_assign_device_set(&vdev->vdev, &mc_dev->dev);
else
ret = vfio_assign_device_set(&vdev->vdev, mc_dev->dev.parent);
if (ret)
goto out_uninit;
ret = vfio_fsl_mc_init_device(vdev);
if (ret)
goto out_uninit;
ret = vfio_register_group_dev(&vdev->vdev);
if (ret) {
dev_err(dev, "VFIO_FSL_MC: Failed to add to vfio group\n");
goto out_device;
}
ret = vfio_fsl_mc_scan_container(mc_dev);
if (ret)
goto out_group_dev;
dev_set_drvdata(dev, vdev);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
return 0;
out_group_dev:
vfio_unregister_group_dev(&vdev->vdev);
out_device:
vfio_fsl_uninit_device(vdev);
out_uninit:
vfio_uninit_group_dev(&vdev->vdev);
kfree(vdev);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
return ret;
}
static int vfio_fsl_mc_remove(struct fsl_mc_device *mc_dev)
{
struct device *dev = &mc_dev->dev;
struct vfio_fsl_mc_device *vdev = dev_get_drvdata(dev);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
vfio_unregister_group_dev(&vdev->vdev);
mutex_destroy(&vdev->igate);
dprc_remove_devices(mc_dev, NULL, 0);
vfio_fsl_uninit_device(vdev);
vfio_uninit_group_dev(&vdev->vdev);
kfree(vdev);
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices DPAA2 (Data Path Acceleration Architecture) consists in mechanisms for processing Ethernet packets, queue management, accelerators, etc. The Management Complex (mc) is a hardware entity that manages the DPAA2 hardware resources. It provides an object-based abstraction for software drivers to use the DPAA2 hardware. The MC mediates operations such as create, discover, destroy of DPAA2 objects. The MC provides memory-mapped I/O command interfaces (MC portals) which DPAA2 software drivers use to operate on DPAA2 objects. A DPRC is a container object that holds other types of DPAA2 objects. Each object in the DPRC is a Linux device and bound to a driver. The MC-bus driver is a platform driver (different from PCI or platform bus). The DPRC driver does runtime management of a bus instance. It performs the initial scan of the DPRC and handles changes in the DPRC configuration (adding/removing objects). All objects inside a container share the same hardware isolation context, meaning that only an entire DPRC can be assigned to a virtual machine. When a container is assigned to a virtual machine, all the objects within that container are assigned to that virtual machine. The DPRC container assigned to the virtual machine is not allowed to change contents (add/remove objects) by the guest. The restriction is set by the host and enforced by the mc hardware. The DPAA2 objects can be directly assigned to the guest. However the MC portals (the memory mapped command interface to the MC) need to be emulated because there are commands that configure the interrupts and the isolation IDs which are virtual in the guest. Example: echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.2/driver_override echo dprc.2 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind The dprc.2 is bound to the VFIO driver and all the objects within dprc.2 are going to be bound to the VFIO driver. This patch adds the infrastructure for VFIO support for fsl-mc devices. Subsequent patches will add support for binding and secure assigning these devices using VFIO. More details about the DPAA2 objects can be found here: Documentation/networking/device_drivers/freescale/dpaa2/overview.rst Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-06 01:36:45 +08:00
return 0;
}
static struct fsl_mc_driver vfio_fsl_mc_driver = {
.probe = vfio_fsl_mc_probe,
.remove = vfio_fsl_mc_remove,
.driver = {
.name = "vfio-fsl-mc",
.owner = THIS_MODULE,
},
};
static int __init vfio_fsl_mc_driver_init(void)
{
return fsl_mc_driver_register(&vfio_fsl_mc_driver);
}
static void __exit vfio_fsl_mc_driver_exit(void)
{
fsl_mc_driver_unregister(&vfio_fsl_mc_driver);
}
module_init(vfio_fsl_mc_driver_init);
module_exit(vfio_fsl_mc_driver_exit);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("VFIO for FSL-MC devices - User Level meta-driver");