OpenCloudOS-Kernel/drivers/hid/Kconfig

1178 lines
33 KiB
Plaintext
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
#
# HID driver configuration
#
menu "HID support"
depends on INPUT
config HID
tristate "HID bus support"
depends on INPUT
default y
help
A human interface device (HID) is a type of computer device that
interacts directly with and takes input from humans. The term "HID"
most commonly used to refer to the USB-HID specification, but other
devices (such as, but not strictly limited to, Bluetooth) are
designed using HID specification (this involves certain keyboards,
mice, tablets, etc). This option adds the HID bus to the kernel,
together with generic HID layer code. The HID devices are added and
removed from the HID bus by the transport-layer drivers, such as
usbhid (USB_HID) and hidp (BT_HIDP).
For docs and specs, see https://www.usb.org/developers/hidpage/
If unsure, say Y.
if HID
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
depends on HID
select POWER_SUPPLY
default n
help
This option adds support of reporting battery strength (for HID devices
that support this feature) through power_supply class so that userspace
tools, such as upower, can display it.
config HIDRAW
bool "/dev/hidraw raw HID device support"
depends on HID
help
Say Y here if you want to support HID devices (from the USB
specification standpoint) that aren't strictly user interface
devices, like monitor controls and Uninterruptible Power Supplies.
This module supports these devices separately using a separate
event interface on /dev/hidraw.
There is also a /dev/hiddev configuration option in the USB HID
configuration menu. In comparison to hiddev, this device does not process
the hid events at all (no parsing, no lookups). This lets applications
to work on raw hid events when they want to, and avoid using transport-specific
userspace libhid/libusb libraries.
If unsure, say Y.
config UHID
tristate "User-space I/O driver support for HID subsystem"
depends on HID
default n
help
Say Y here if you want to provide HID I/O Drivers from user-space.
This allows to write I/O drivers in user-space and feed the data from
the device into the kernel. The kernel parses the HID reports, loads the
corresponding HID Device Driver or provides input devices on top of your
user-space device.
This driver cannot be used to parse HID-reports in user-space and write
special HID-drivers. You should use hidraw for that.
Instead, this driver allows to write the transport-layer driver in
user-space like USB-HID and Bluetooth-HID do in kernel-space.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called uhid.
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
default HID
help
Support for generic devices on the HID bus. This includes most
keyboards and mice, joysticks, tablets and digitizers.
To compile this driver as a module, choose M here: the module
will be called hid-generic.
If unsure, say Y.
menu "Special HID drivers"
depends on HID
config HID_A4TECH
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "A4 tech mice"
depends on HID
default !EXPERT
help
Support for A4 tech X5 and WOP-35 / Trust 450L mice.
config HID_ACCUTOUCH
tristate "Accutouch touch device"
depends on USB_HID
help
This selects a driver for the Accutouch 2216 touch controller.
The driver works around a problem in the reported device capabilities
which causes userspace to detect the device as a mouse rather than
a touchscreen.
Say Y here if you have a Accutouch 2216 touch controller.
config HID_ACRUX
tristate "ACRUX game controller support"
depends on HID
help
Say Y here if you want to enable support for ACRUX game controllers.
config HID_ACRUX_FF
bool "ACRUX force feedback support"
depends on HID_ACRUX
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for ACRUX
game controllers.
config HID_APPLE
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Apple {i,Power,Mac}Books"
depends on HID
default !EXPERT
help
Support for some Apple devices which less or more break
HID specification.
Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
MacBooks, MacBook Pros and Apple Aluminum.
config HID_APPLEIR
tristate "Apple infrared receiver"
depends on (USB_HID)
help
Support for Apple infrared remote control. All the Apple computers from
2005 onwards include such a port, except the unibody Macbook (2009),
and Mac Pros. This receiver is also used in the Apple TV set-top box
prior to the 2010 model.
Say Y here if you want support for Apple infrared remote control.
2016-03-21 15:18:42 +08:00
config HID_ASUS
tristate "Asus"
depends on USB_HID
depends on LEDS_CLASS
depends on ASUS_WMI || ASUS_WMI=n
select POWER_SUPPLY
help
Support for Asus notebook built-in keyboard and touchpad via i2c, and
the Asus Republic of Gamers laptop keyboard special keys.
Supported devices:
- EeeBook X205TA
- VivoBook E200HA
- GL553V series
- GL753V series
2016-03-21 15:18:42 +08:00
config HID_AUREAL
tristate "Aureal"
depends on HID
help
Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
config HID_BELKIN
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Belkin Flip KVM and Wireless keyboard"
depends on HID
default !EXPERT
help
Support for Belkin Flip KVM and Wireless keyboard.
config HID_BETOP_FF
tristate "Betop Production Inc. force feedback support"
depends on USB_HID
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for devices by
BETOP Production Ltd.
Currently the following devices are known to be supported:
- BETOP 2185 PC & BFM MODE
config HID_BIGBEN_FF
tristate "BigBen Interactive Kids' gamepad support"
depends on USB_HID
depends on NEW_LEDS
depends on LEDS_CLASS
select INPUT_FF_MEMLESS
help
Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD
gamepad made by BigBen Interactive, originally sold as a PS3
accessory. This driver fixes input mapping and adds support for
force feedback effects and LEDs on the device.
config HID_CHERRY
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Cherry Cymotion keyboard"
depends on HID
default !EXPERT
help
Support for Cherry Cymotion keyboard.
config HID_CHICONY
tristate "Chicony devices"
depends on HID
default !EXPERT
help
Support for Chicony Tactical pad and special keys on Chicony keyboards.
config HID_CORSAIR
tristate "Corsair devices"
depends on HID && USB && LEDS_CLASS
help
Support for Corsair devices that are not fully compliant with the
HID standard.
Supported devices:
- Vengeance K90
- Scimitar PRO RGB
config HID_COUGAR
tristate "Cougar devices"
depends on HID
help
Support for Cougar devices that are not fully compliant with the
HID standard.
Supported devices:
- Cougar 500k Gaming Keyboard
config HID_MACALLY
tristate "Macally devices"
depends on HID
help
Support for Macally devices that are not fully compliant with the
HID standard.
supported devices:
- Macally ikey keyboard
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on HID && SND
select SND_RAWMIDI
help
Support for Prodikeys PC-MIDI Keyboard device support.
Say Y here to enable support for this device.
- Prodikeys PC-MIDI keyboard.
The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
input and one MIDI output. These MIDI jacks appear as
a sound "card" in the ALSA sound system.
Note: if you say N here, this device will still function as a basic
multimedia keyboard, but will lack support for the musical keyboard
and some additional multimedia keys.
config HID_CMEDIA
tristate "CMedia CM6533 HID audio jack controls"
depends on HID
help
Support for CMedia CM6533 HID audio jack controls.
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && HIDRAW && I2C && GPIOLIB
select GPIOLIB_IRQCHIP
help
Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
This is a HID device driver which registers as an i2c adapter
and gpiochip to expose these functions of the CP2112. The
customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CREATIVE_SB0540
tristate "Creative SB0540 infrared receiver"
depends on USB_HID
help
Support for Creative infrared SB0540-compatible remote controls, such
as the RM-1500 and RM-1800 remotes.
Say Y here if you want support for Creative SB0540 infrared receiver.
config HID_CYPRESS
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Cypress mouse and barcode readers"
depends on HID
default !EXPERT
help
Support for cypress mouse and barcode readers.
config HID_DRAGONRISE
tristate "DragonRise Inc. game controller"
depends on HID
help
Say Y here if you have DragonRise Inc. game controllers.
These might be branded as:
- Tesun USB-703
- Media-tech MT1504 "Rogue"
- DVTech JS19 "Gear"
- Defender Game Master
config DRAGONRISE_FF
bool "DragonRise Inc. force feedback"
depends on HID_DRAGONRISE
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for DragonRise Inc.
game controllers.
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
depends on HID
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for devices by
EMS Production Ltd.
Currently the following devices are known to be supported:
- Trio Linker Plus II
config HID_ELAN
tristate "ELAN USB Touchpad Support"
depends on LEDS_CLASS && USB_HID
help
Say Y to enable support for the USB ELAN touchpad
Currently the following devices are known to be supported:
- HP Pavilion X2 10-p0XX.
config HID_ELECOM
tristate "ELECOM HID devices"
depends on HID
help
Support for ELECOM devices:
- BM084 Bluetooth Mouse
- EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
- DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
- HUGE Trackballs (M-HT1DRBK, M-HT1URBK)
config HID_ELO
tristate "ELO USB 4000/4500 touchscreen"
depends on USB_HID
help
Support for the ELO USB 4000/4500 touchscreens. Note that this is for
different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
config HID_EZKEY
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Ezkey BTC 8193 keyboard"
depends on HID
default !EXPERT
help
Support for Ezkey BTC 8193 keyboard.
config HID_GEMBIRD
tristate "Gembird Joypad"
depends on HID
help
Support for Gembird JPD-DualForce 2.
config HID_GFRM
tristate "Google Fiber TV Box remote control support"
depends on HID
help
Support for Google Fiber TV Box remote controls
config HID_GLORIOUS
tristate "Glorious PC Gaming Race mice"
depends on HID
help
Support for Glorious PC Gaming Race mice such as
the Glorious Model O, O- and D.
config HID_HOLTEK
tristate "Holtek HID devices"
depends on USB_HID
help
Support for Holtek based devices:
- Holtek On Line Grip based game controller
- Trust GXT 18 Gaming Keyboard
- Sharkoon Drakonia / Perixx MX-2000 gaming mice
- Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
Zalman ZM-GM1
- SHARKOON DarkGlider Gaming mouse
- LEETGION Hellion Gaming Mouse
config HOLTEK_FF
bool "Holtek On Line Grip force feedback support"
depends on HID_HOLTEK
select INPUT_FF_MEMLESS
help
Say Y here if you have a Holtek On Line Grip based game controller
and want to have force feedback support for it.
config HID_GOOGLE_HAMMER
tristate "Google Hammer Keyboard"
depends on USB_HID && LEDS_CLASS && CROS_EC
help
Say Y here if you have a Google Hammer device.
config HID_GT683R
tristate "MSI GT68xR LED support"
depends on LEDS_CLASS && USB_HID
help
Say Y here if you want to enable support for the three MSI GT68xR LEDs
This driver support following modes:
- Normal: LEDs are fully on when enabled
- Audio: LEDs brightness depends on sound level
- Breathing: LEDs brightness varies at human breathing rate
Currently the following devices are know to be supported:
- MSI GT683R
config HID_KEYTOUCH
tristate "Keytouch HID devices"
depends on HID
help
Support for Keytouch HID devices not fully compliant with
the specification. Currently supported:
- Keytouch IEC 60945
config HID_KYE
tristate "KYE/Genius devices"
depends on HID
help
Support for KYE/Genius devices not fully compliant with HID standard:
- Ergo Mouse
- EasyPen i405X tablet
- MousePen i608X tablet
- EasyPen M610X tablet
config HID_UCLOGIC
tristate "UC-Logic"
depends on USB_HID
help
Support for UC-Logic and Huion tablets.
config HID_WALTOP
tristate "Waltop"
depends on HID
help
Support for Waltop tablets.
config HID_VIEWSONIC
tristate "ViewSonic/Signotec"
depends on HID
help
Support for ViewSonic/Signotec PD1011 signature pad.
config HID_GYRATION
tristate "Gyration remote control"
depends on HID
help
Support for Gyration remote control.
config HID_ICADE
tristate "ION iCade arcade controller"
depends on HID
help
Support for the ION iCade arcade controller to work as a joystick.
To compile this driver as a module, choose M here: the
module will be called hid-icade.
config HID_ITE
tristate "ITE devices"
depends on HID
default !EXPERT
help
Support for ITE devices not fully compliant with HID standard.
config HID_JABRA
tristate "Jabra USB HID Driver"
depends on HID
help
Support for Jabra USB HID devices.
Prevents mapping of vendor defined HID usages to input events. Without
this driver HID reports from Jabra devices may incorrectly be seen as
mouse button events.
Say M here if you may ever plug in a Jabra USB device.
config HID_TWINHAN
tristate "Twinhan IR remote control"
depends on HID
help
Support for Twinhan IR remote control.
config HID_KENSINGTON
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Kensington Slimblade Trackball"
depends on HID
default !EXPERT
help
Support for Kensington Slimblade Trackball.
config HID_LCPOWER
tristate "LC-Power"
depends on HID
help
Support for LC-Power RC1000MCE RF remote control.
config HID_LED
tristate "Simple RGB LED support"
depends on HID
depends on LEDS_CLASS
help
Support for simple RGB LED devices. Currently supported are:
- Riso Kagaku Webmail Notifier
- Dream Cheeky Webmail Notifier and Friends Alert
- ThingM blink(1)
- Delcom Visual Signal Indicator Generation 2
- Greynut Luxafor
To compile this driver as a module, choose M here: the
module will be called hid-led.
config HID_LENOVO
tristate "Lenovo / Thinkpad devices"
depends on HID
select NEW_LEDS
select LEDS_CLASS
help
Support for IBM/Lenovo devices that are not fully compliant with HID standard.
Say Y if you want support for horizontal scrolling of the IBM/Lenovo
Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
standalone keyboards, e.g:
- ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
configuration)
- ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
- ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
config HID_LOGITECH
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Logitech devices"
depends on HID
depends on LEDS_CLASS
default !EXPERT
help
Support for Logitech devices that are not fully compliant with HID standard.
config HID_LOGITECH_DJ
tristate "Logitech receivers full support"
depends on USB_HID
depends on HIDRAW
depends on HID_LOGITECH
select HID_LOGITECH_HIDPP
help
Say Y if you want support for Logitech receivers and devices.
Logitech receivers are capable of pairing multiple Logitech compliant
devices to the same receiver. Without this driver it will be handled by
generic USB_HID driver and all incoming events will be multiplexed
into a single mouse and a single keyboard device.
config HID_LOGITECH_HIDPP
tristate "Logitech HID++ devices support"
depends on HID_LOGITECH
select POWER_SUPPLY
help
Support for Logitech devices relyingon the HID++ Logitech specification
Say Y if you want support for Logitech devices relying on the HID++
specification. Such devices are the various Logitech Touchpads (T650,
T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
Keyboard).
config LOGITECH_FF
bool "Logitech force feedback support"
depends on HID_LOGITECH
select INPUT_FF_MEMLESS
help
Say Y here if you have one of these devices:
- Logitech WingMan Cordless RumblePad
- Logitech WingMan Cordless RumblePad 2
- Logitech WingMan Force 3D
and if you want to enable force feedback for them.
Note: if you say N here, this device will still be supported, but without
force feedback.
config LOGIRUMBLEPAD2_FF
bool "Logitech force feedback support (variant 2)"
depends on HID_LOGITECH
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for:
- Logitech RumblePad
- Logitech Rumblepad 2
- Logitech Formula Vibration Feedback Wheel
config LOGIG940_FF
bool "Logitech Flight System G940 force feedback support"
depends on HID_LOGITECH
select INPUT_FF_MEMLESS
help
Say Y here if you want to enable force feedback support for Logitech
Flight System G940 devices.
config LOGIWHEELS_FF
bool "Logitech wheels configuration and force feedback support"
depends on HID_LOGITECH
select INPUT_FF_MEMLESS
default LOGITECH_FF
help
Say Y here if you want to enable force feedback and range setting(*)
support for following Logitech wheels:
- Logitech G25 (*)
- Logitech G27 (*)
- Logitech G29 (*)
- Logitech Driving Force
- Logitech Driving Force Pro (*)
- Logitech Driving Force GT (*)
- Logitech Driving Force EX/RX
- Logitech Driving Force Wireless
- Logitech Speed Force Wireless
- Logitech MOMO Force
- Logitech MOMO Racing Force
- Logitech Formula Force GP
- Logitech Formula Force EX/RX
- Logitech Wingman Formula Force GP
config HID_MAGICMOUSE
tristate "Apple Magic Mouse/Trackpad multi-touch support"
depends on HID
help
Support for the Apple Magic Mouse/Trackpad multi-touch.
Say Y here if you want support for the multi-touch features of the
Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MALTRON
tristate "Maltron L90 keyboard"
depends on HID
help
Adds support for the volume up, volume down, mute, and play/pause buttons
of the Maltron L90 keyboard.
config HID_MAYFLASH
tristate "Mayflash game controller adapter force feedback"
depends on HID
select INPUT_FF_MEMLESS
help
Say Y here if you have HJZ Mayflash PS3 game controller adapters
and want to enable force feedback support.
config HID_REDRAGON
tristate "Redragon keyboards"
depends on HID
default !EXPERT
help
Support for Redragon keyboards that need fix-ups to work properly.
config HID_MICROSOFT
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Microsoft non-fully HID-compliant devices"
depends on HID
default !EXPERT
select INPUT_FF_MEMLESS
help
Support for Microsoft devices that are not fully compliant with HID standard.
config HID_MONTEREY
HID: Stop hiding options with !EXPERT Many HID driver options are hidden unless EXPERT is set. While I understand the idea of simplifying the kernel configuration for most users, in practice I believe it adds more confusion than it helps. One thing that worries me is that, in non-EXPERT mode, these drivers will be either built-in or modular based on apparent magic. For example, switching INPUT and HID from m to y will cause all these drivers to be built into the kernel when they were previously built as modules. Short of enabling EXPERT mode altogether, the user has no control over that. Generally I do not think tristate options should depend on !EXPERT. Of these, 11 of 15 are currently in the hid subsystem. The HID_LOGITECH option is even worse than the others. Sub-options depend on it, and this causes menuconfig and friends to display the option even though the user can't change its value. The help page for HID_LOGITECH will not explain why the value can't be changed. It only says, for example: Depends on: INPUT [=y] && HID [=y] and that leaves the user puzzled about why the option is forced to y. You might argue that this is a Kconfig bug, but that doesn't make it less annoying for the user. Even worse is that some of the sub-options of HID_LOGITECH select INPUT_FF_MEMLESS, which in turn gets out of control for the user. So, if you set INPUT=y and HID=y (something most general purpose distributions would do these days, as both modules would get loaded on a vast majority of systems otherwise), and you want support for force-feedback game controllers, you can't have that as a module, it has to be built-in, regardless of how rare these devices are. Of course, all this madness goes away once EXPERT is enabled, but then the rest of the kernel configuration becomes more complex, which totally voids the original point. For this reason, I would like all HID device tristate options to be displayed regardless of EXPERT being set or not. We can let the default settings still depend on EXPERT, that's not intrusive. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-21 00:33:33 +08:00
tristate "Monterey Genius KB29E keyboard"
depends on HID
default !EXPERT
help
Support for Monterey Genius KB29E.
config HID_MULTITOUCH
tristate "HID Multitouch panels"
depends on HID
help
Generic support for HID multitouch panels.
Say Y here if you have one of the following devices:
- 3M PCT touch screens
- ActionStar dual touch panels
- Atmel panels
- Cando dual touch panels
- Chunghwa panels
- CJTouch panels
- CVTouch panels
- Cypress TrueTouch panels
- Elan Microelectronics touch panels
- Elo TouchSystems IntelliTouch Plus panels
- GeneralTouch 'Sensing Win7-TwoFinger' panels
- GoodTouch panels
- Hanvon dual touch panels
- Ilitek dual touch panels
- IrTouch Infrared USB panels
- LG Display panels (Dell ST2220Tc)
- Lumio CrystalTouch panels
- MosArt dual-touch panels
- Panasonic multitouch panels
- PenMount dual touch panels
- Perixx Peripad 701 touchpad
- PixArt optical touch screen
- Pixcir dual touch panels
- Quanta panels
- eGalax dual-touch panels, including the Joojoo and Wetab tablets
- SiS multitouch panels
- Stantum multitouch panels
- Touch International Panels
- Unitec Panels
- Wistron optical touch panels
- XAT optical touch panels
- Xiroku optical touch panels
- Zytronic touch panels
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called hid-multitouch.
config HID_NTI
tristate "NTI keyboard adapters"
help
Support for the "extra" Sun keyboard keys on keyboards attached
through Network Technologies USB-SUN keyboard adapters.
config HID_NTRIG
tristate "N-Trig touch screen"
depends on USB_HID
help
Support for N-Trig touch screen.
config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
depends on HID
help
There are certain devices which have LogicalMaximum wrong in the keyboard
usage page of their report descriptor. The most prevailing ones so far
are manufactured by Ortek, thus the name of the driver. Currently
supported devices by this driver are
- Ortek PKB-1700
- Ortek WKB-2000
- Skycable wireless presenter
config HID_PANTHERLORD
tristate "Pantherlord/GreenAsia game controller"
depends on HID
help
Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter.
config PANTHERLORD_FF
bool "Pantherlord force feedback support"
depends on HID_PANTHERLORD
select INPUT_FF_MEMLESS
help
Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter and want to enable force feedback support for it.
config HID_PENMOUNT
tristate "Penmount touch device"
depends on USB_HID
help
This selects a driver for the PenMount 6000 touch controller.
The driver works around a problem in the report descript allowing
the userspace to touch events instead of mouse events.
Say Y here if you have a Penmount based touch controller.
config HID_PETALYNX
tristate "Petalynx Maxter remote control"
depends on HID
help
Support for Petalynx Maxter remote control.
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
depends on HID
help
This provides support for Minibox PicoLCD devices, currently
only the graphical ones are supported.
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- EEProm / Flash access (via debugfs)
Features selectively enabled:
- Framebuffer for monochrome 256x64 display
- Backlight control
- Contrast control
- General purpose outputs
Features that are not (yet) supported:
- IR
config HID_PICOLCD_FB
bool "Framebuffer support" if EXPERT
default !EXPERT
depends on HID_PICOLCD
depends on HID_PICOLCD=FB || FB=y
select FB_DEFERRED_IO
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
help
Provide access to PicoLCD's 256x64 monochrome display via a
framebuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EXPERT
default !EXPERT
depends on HID_PICOLCD
depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
help
Provide access to PicoLCD's backlight control via backlight
class.
config HID_PICOLCD_LCD
bool "Contrast control" if EXPERT
default !EXPERT
depends on HID_PICOLCD
depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
help
Provide access to PicoLCD's LCD contrast via lcd class.
config HID_PICOLCD_LEDS
bool "GPO via leds class" if EXPERT
default !EXPERT
depends on HID_PICOLCD
depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
help
Provide access to PicoLCD's GPO pins via leds class.
config HID_PICOLCD_CIR
bool "CIR via RC class" if EXPERT
default !EXPERT
depends on HID_PICOLCD
depends on HID_PICOLCD=RC_CORE || RC_CORE=y
help
Provide access to PicoLCD's CIR interface via remote control (LIRC).
config HID_PLANTRONICS
tristate "Plantronics USB HID Driver"
depends on HID
help
Provides HID support for Plantronics USB audio devices.
Correctly maps vendor unique volume up/down HID usages to
KEY_VOLUMEUP and KEY_VOLUMEDOWN events and prevents core mapping
of other vendor unique HID usages to random mouse events.
Say M here if you may ever plug in a Plantronics USB audio device.
config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
depends on HID
help
Support for Primax devices that are not fully compliant with the
HID standard.
config HID_RETRODE
tristate "Retrode 2 USB adapter for vintage video games"
depends on USB_HID
help
Support for
* Retrode 2 cartridge and controller adapter
config HID_ROCCAT
tristate "Roccat device support"
depends on USB_HID
help
Support for Roccat devices.
Say Y here if you have a Roccat mouse or keyboard and want
support for its special functionalities.
config HID_SAITEK
tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
depends on HID
help
Support for Saitek devices that are not fully compliant with the
HID standard.
Supported devices:
- PS1000 Dual Analog Pad
- Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
- Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
depends on HID
help
Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
tristate "Sony PS2/3/4 accessories"
depends on USB_HID
depends on NEW_LEDS
depends on LEDS_CLASS
select POWER_SUPPLY
help
Support for
* Sony PS3 6-axis controllers
* Sony PS4 DualShock 4 controllers
* Buzz controllers
* Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
* Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
config SONY_FF
bool "Sony PS2/3/4 accessories force feedback support"
depends on HID_SONY
select INPUT_FF_MEMLESS
help
Say Y here if you have a Sony PS2/3/4 accessory and want to enable
force feedback support for it.
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
depends on HID
help
Support for Speedlink Vicious and Divine Cezanne mouse.
config HID_STEAM
tristate "Steam Controller support"
depends on HID
select POWER_SUPPLY
help
Say Y here if you have a Steam Controller if you want to use it
without running the Steam Client. It supports both the wired and
the wireless adaptor.
config HID_STEELSERIES
tristate "Steelseries SRW-S1 steering wheel support"
depends on HID
help
Support for Steelseries SRW-S1 steering wheel
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
depends on HID
help
Support for Sunplus wireless desktop.
config HID_RMI
tristate "Synaptics RMI4 device support"
depends on HID
select RMI4_CORE
select RMI4_F03
select RMI4_F11
select RMI4_F12
select RMI4_F30
help
Support for Synaptics RMI4 touchpads.
Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
and want support for its special functionalities.
config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) game controller support"
depends on HID
help
Say Y here if you have a GreenAsia (Product ID 0x12) based game
controller or adapter.
config GREENASIA_FF
bool "GreenAsia (Product ID 0x12) force feedback support"
depends on HID_GREENASIA
select INPUT_FF_MEMLESS
help
Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
(like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
and want to enable force feedback support for it.
config HID_HYPERV_MOUSE
tristate "Microsoft Hyper-V mouse driver"
depends on HYPERV
help
Select this option to enable the Hyper-V mouse driver.
config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support"
depends on HID
help
Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
Note that DDR (Dance Dance Revolution) mode is not supported, nor
is pressure sensitive buttons on the pro models.
config SMARTJOYPLUS_FF
bool "SmartJoy PLUS PS2/USB adapter force feedback support"
depends on HID_SMARTJOYPLUS
select INPUT_FF_MEMLESS
help
Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
depends on HID
help
Say Y if you have a TiVo Slide Bluetooth remote control.
config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on HID
help
Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
CLLRCMCE remote control.
config HID_THINGM
tristate "ThingM blink(1) USB RGB LED"
depends on HID
depends on LEDS_CLASS
select HID_LED
help
Support for the ThingM blink(1) USB RGB LED. This driver has been
merged into the generic hid led driver. Config symbol HID_THINGM
just selects HID_LED and will be removed soon.
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
depends on HID
help
Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
a THRUSTMASTER Ferrari GT Rumble Wheel.
config THRUSTMASTER_FF
bool "ThrustMaster devices force feedback support"
depends on HID_THRUSTMASTER
select INPUT_FF_MEMLESS
help
Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3,
a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT
Rumble Force or Force Feedback Wheel.
config HID_UDRAW_PS3
tristate "THQ PS3 uDraw tablet"
depends on HID
help
Say Y here if you want to use the THQ uDraw gaming tablet for
the PS3.
config HID_U2FZERO
tristate "U2F Zero LED and RNG support"
depends on USB_HID
depends on LEDS_CLASS
depends on HW_RANDOM
help
Support for the LED of the U2F Zero device.
U2F Zero supports custom commands for blinking the LED
and getting data from the internal hardware RNG.
The internal hardware can be used to feed the enthropy pool.
U2F Zero only supports blinking its LED, so this driver doesn't
allow setting the brightness to anything but 1, which will
trigger a single blink and immediately reset back to 0.
config HID_WACOM
tristate "Wacom Intuos/Graphire tablet support (USB)"
depends on USB_HID
select POWER_SUPPLY
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
help
Say Y here if you want to use the USB or BT version of the Wacom Intuos
or Graphire tablet.
To compile this driver as a module, choose M here: the
module will be called wacom.
config HID_WIIMOTE
tristate "Nintendo Wii / Wii U peripherals"
depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
select INPUT_FF_MEMLESS
help
Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
devices are the Wii Remote and its extension devices, but also devices
based on the Wii Remote like the Wii U Pro Controller or the
Wii Balance Board.
Support for all official Nintendo extensions is available, however, 3rd
party extensions might not be supported. Please report these devices to:
http://github.com/dvdhrm/xwiimote/issues
Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
the Wii U Gamepad) might be supported in the future. But currently
support is limited to Bluetooth based devices.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called hid-wiimote.
config HID_XINMO
tristate "Xin-Mo non-fully compliant devices"
depends on HID
help
Support for Xin-Mo devices that are not fully compliant with the HID
standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
if you have a Xin-Mo Dual Arcade controller.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
depends on HID
help
Say Y here if you have a Zeroplus based game controller.
config ZEROPLUS_FF
bool "Zeroplus based game controller force feedback support"
depends on HID_ZEROPLUS
select INPUT_FF_MEMLESS
help
Say Y here if you have a Zeroplus based game controller and want
to have force feedback support for it.
config HID_ZYDACRON
tristate "Zydacron remote control support"
depends on HID
help
Support for Zydacron remote control.
config HID_SENSOR_HUB
tristate "HID Sensors framework support"
depends on HID && HAS_IOMEM
select MFD_CORE
default n
help
Support for HID Sensor framework. This creates a MFD instance
for a sensor hub and identifies all the sensors connected to it.
Each sensor is registered as a MFD cell, so that sensor specific
processing can be done in a separate driver. Each sensor
drivers can use the service provided by this driver to register
for events and handle data streams. Each sensor driver can format
data and present to user mode using input or IIO interface.
config HID_SENSOR_CUSTOM_SENSOR
tristate "HID Sensors hub custom sensor support"
depends on HID_SENSOR_HUB
default n
help
HID Sensor hub specification allows definition of some custom and
generic sensors. Unlike other HID sensors, they can't be exported
via Linux IIO because of custom fields. This is up to the manufacturer
to decide how to interpret these special sensor ids and process in
the user space. Currently some manufacturers are using these ids for
sensor calibration and debugging other sensors. Manufacturers
shouldn't use these special custom sensor ids to export any of the
standard sensors.
Select this config option for custom/generic sensor support.
config HID_ALPS
tristate "Alps HID device support"
depends on HID
help
Support for Alps I2C HID touchpads and StickPointer.
Say Y here if you have a Alps touchpads over i2c-hid or usbhid
and want support for its special functionalities.
config HID_MCP2221
tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
depends on USB_HID && I2C
depends on GPIOLIB
help
Provides I2C and SMBUS host adapter functionality over USB-HID
through MCP2221 device.
To compile this driver as a module, choose M here: the module
will be called hid-mcp2221.ko.
endmenu
endif # HID
source "drivers/hid/usbhid/Kconfig"
source "drivers/hid/i2c-hid/Kconfig"
source "drivers/hid/intel-ish-hid/Kconfig"
endmenu