OpenCloudOS-Kernel/drivers/acpi/cppc_acpi.c

1480 lines
43 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
*
* (C) Copyright 2014, 2015 Linaro Ltd.
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
*
* CPPC describes a few methods for controlling CPU performance using
* information from a per CPU table called CPC. This table is described in
* the ACPI v5.0+ specification. The table consists of a list of
* registers which may be memory mapped or hardware registers and also may
* include some static integer values.
*
* CPU performance is on an abstract continuous scale as against a discretized
* P-state scale which is tied to CPU frequency only. In brief, the basic
* operation involves:
*
* - OS makes a CPU performance request. (Can provide min and max bounds)
*
* - Platform (such as BMC) is free to optimize request within requested bounds
* depending on power/thermal budgets etc.
*
* - Platform conveys its decision back to OS
*
* The communication between OS and platform occurs through another medium
* called (PCC) Platform Communication Channel. This is a generic mailbox like
* mechanism which includes doorbell semantics to indicate register updates.
* See drivers/mailbox/pcc.c for details on PCC.
*
* Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
* above specifications.
*/
#define pr_fmt(fmt) "ACPI CPPC: " fmt
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/ktime.h>
#include <linux/rwsem.h>
#include <linux/wait.h>
#include <linux/topology.h>
#include <acpi/cppc_acpi.h>
struct cppc_pcc_data {
struct pcc_mbox_chan *pcc_channel;
void __iomem *pcc_comm_addr;
bool pcc_channel_acquired;
unsigned int deadline_us;
unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */
bool platform_owns_pcc; /* Ownership of PCC subspace */
unsigned int pcc_write_cnt; /* Running count of PCC write commands */
/*
* Lock to provide controlled access to the PCC channel.
*
* For performance critical usecases(currently cppc_set_perf)
* We need to take read_lock and check if channel belongs to OSPM
* before reading or writing to PCC subspace
* We need to take write_lock before transferring the channel
* ownership to the platform via a Doorbell
* This allows us to batch a number of CPPC requests if they happen
* to originate in about the same time
*
* For non-performance critical usecases(init)
* Take write_lock for all purposes which gives exclusive access
*/
struct rw_semaphore pcc_lock;
/* Wait queue for CPUs whose requests were batched */
wait_queue_head_t pcc_write_wait_q;
ktime_t last_cmd_cmpl_time;
ktime_t last_mpar_reset;
int mpar_count;
int refcount;
};
/* Array to represent the PCC channel per subspace ID */
static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
/* The cpu_pcc_subspace_idx contains per CPU subspace ID */
static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
/*
* The cpc_desc structure contains the ACPI register details
* as described in the per CPU _CPC tables. The details
* include the type of register (e.g. PCC, System IO, FFH etc.)
* and destination addresses which lets us READ/WRITE CPU performance
* information using the appropriate I/O methods.
*/
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* pcc mapped address + header size + offset within PCC subspace */
#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
0x8 + (offs))
/* Check if a CPC register is in PCC */
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_PLATFORM_COMM)
/* Evaluates to True if reg is a NULL register descriptor */
#define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \
(reg)->address == 0 && \
(reg)->bit_width == 0 && \
(reg)->bit_offset == 0 && \
(reg)->access_width == 0)
/* Evaluates to True if an optional cpc field is supported */
#define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \
!!(cpc)->cpc_entry.int_value : \
!IS_NULL_REG(&(cpc)->cpc_entry.reg))
/*
* Arbitrary Retries in case the remote processor is slow to respond
* to PCC commands. Keeping it high enough to cover emulators where
* the processors run painfully slow.
*/
#define NUM_RETRIES 500ULL
#define OVER_16BTS_MASK ~0xFFFFULL
#define define_one_cppc_ro(_name) \
static struct kobj_attribute _name = \
__ATTR(_name, 0444, show_##_name, NULL)
#define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
#define show_cppc_data(access_fn, struct_name, member_name) \
static ssize_t show_##member_name(struct kobject *kobj, \
struct kobj_attribute *attr, char *buf) \
{ \
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
struct struct_name st_name = {0}; \
int ret; \
\
ret = access_fn(cpc_ptr->cpu_id, &st_name); \
if (ret) \
return ret; \
\
return scnprintf(buf, PAGE_SIZE, "%llu\n", \
(u64)st_name.member_name); \
} \
define_one_cppc_ro(member_name)
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
static ssize_t show_feedback_ctrs(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
struct cppc_perf_fb_ctrs fb_ctrs = {0};
int ret;
ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
if (ret)
return ret;
return scnprintf(buf, PAGE_SIZE, "ref:%llu del:%llu\n",
fb_ctrs.reference, fb_ctrs.delivered);
}
define_one_cppc_ro(feedback_ctrs);
static struct attribute *cppc_attrs[] = {
&feedback_ctrs.attr,
&reference_perf.attr,
&wraparound_time.attr,
&highest_perf.attr,
&lowest_perf.attr,
&lowest_nonlinear_perf.attr,
&nominal_perf.attr,
&nominal_freq.attr,
&lowest_freq.attr,
NULL
};
ATTRIBUTE_GROUPS(cppc);
static struct kobj_type cppc_ktype = {
.sysfs_ops = &kobj_sysfs_ops,
.default_groups = cppc_groups,
};
static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
{
int ret, status;
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
pcc_ss_data->pcc_comm_addr;
if (!pcc_ss_data->platform_owns_pcc)
return 0;
/*
* Poll PCC status register every 3us(delay_us) for maximum of
* deadline_us(timeout_us) until PCC command complete bit is set(cond)
*/
ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status,
status & PCC_CMD_COMPLETE_MASK, 3,
pcc_ss_data->deadline_us);
if (likely(!ret)) {
pcc_ss_data->platform_owns_pcc = false;
if (chk_err_bit && (status & PCC_ERROR_MASK))
ret = -EIO;
}
if (unlikely(ret))
pr_err("PCC check channel failed for ss: %d. ret=%d\n",
pcc_ss_id, ret);
return ret;
}
/*
* This function transfers the ownership of the PCC to the platform
* So it must be called while holding write_lock(pcc_lock)
*/
static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
{
int ret = -EIO, i;
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
pcc_ss_data->pcc_comm_addr;
unsigned int time_delta;
/*
* For CMD_WRITE we know for a fact the caller should have checked
* the channel before writing to PCC space
*/
if (cmd == CMD_READ) {
/*
* If there are pending cpc_writes, then we stole the channel
* before write completion, so first send a WRITE command to
* platform
*/
if (pcc_ss_data->pending_pcc_write_cmd)
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
ret = check_pcc_chan(pcc_ss_id, false);
if (ret)
goto end;
} else /* CMD_WRITE */
pcc_ss_data->pending_pcc_write_cmd = FALSE;
/*
* Handle the Minimum Request Turnaround Time(MRTT)
* "The minimum amount of time that OSPM must wait after the completion
* of a command before issuing the next command, in microseconds"
*/
if (pcc_ss_data->pcc_mrtt) {
time_delta = ktime_us_delta(ktime_get(),
pcc_ss_data->last_cmd_cmpl_time);
if (pcc_ss_data->pcc_mrtt > time_delta)
udelay(pcc_ss_data->pcc_mrtt - time_delta);
}
/*
* Handle the non-zero Maximum Periodic Access Rate(MPAR)
* "The maximum number of periodic requests that the subspace channel can
* support, reported in commands per minute. 0 indicates no limitation."
*
* This parameter should be ideally zero or large enough so that it can
* handle maximum number of requests that all the cores in the system can
* collectively generate. If it is not, we will follow the spec and just
* not send the request to the platform after hitting the MPAR limit in
* any 60s window
*/
if (pcc_ss_data->pcc_mpar) {
if (pcc_ss_data->mpar_count == 0) {
time_delta = ktime_ms_delta(ktime_get(),
pcc_ss_data->last_mpar_reset);
if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
pcc_ss_id);
ret = -EIO;
goto end;
}
pcc_ss_data->last_mpar_reset = ktime_get();
pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
}
pcc_ss_data->mpar_count--;
}
/* Write to the shared comm region. */
writew_relaxed(cmd, &generic_comm_base->command);
/* Flip CMD COMPLETE bit */
writew_relaxed(0, &generic_comm_base->status);
pcc_ss_data->platform_owns_pcc = true;
/* Ring doorbell */
ret = mbox_send_message(pcc_ss_data->pcc_channel->mchan, &cmd);
if (ret < 0) {
pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
pcc_ss_id, cmd, ret);
goto end;
}
/* wait for completion and check for PCC errro bit */
ret = check_pcc_chan(pcc_ss_id, true);
if (pcc_ss_data->pcc_mrtt)
pcc_ss_data->last_cmd_cmpl_time = ktime_get();
if (pcc_ss_data->pcc_channel->mchan->mbox->txdone_irq)
mbox_chan_txdone(pcc_ss_data->pcc_channel->mchan, ret);
else
mbox_client_txdone(pcc_ss_data->pcc_channel->mchan, ret);
end:
if (cmd == CMD_WRITE) {
if (unlikely(ret)) {
for_each_possible_cpu(i) {
struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i);
if (!desc)
continue;
if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
desc->write_cmd_status = ret;
}
}
pcc_ss_data->pcc_write_cnt++;
wake_up_all(&pcc_ss_data->pcc_write_wait_q);
}
return ret;
}
static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
{
if (ret < 0)
pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
else
pr_debug("TX completed. CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
}
static struct mbox_client cppc_mbox_cl = {
.tx_done = cppc_chan_tx_done,
.knows_txdone = true,
};
static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
{
int result = -EFAULT;
acpi_status status = AE_OK;
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
struct acpi_buffer state = {0, NULL};
union acpi_object *psd = NULL;
struct acpi_psd_package *pdomain;
status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
&buffer, ACPI_TYPE_PACKAGE);
if (status == AE_NOT_FOUND) /* _PSD is optional */
return 0;
if (ACPI_FAILURE(status))
return -ENODEV;
psd = buffer.pointer;
if (!psd || psd->package.count != 1) {
pr_debug("Invalid _PSD data\n");
goto end;
}
pdomain = &(cpc_ptr->domain_info);
state.length = sizeof(struct acpi_psd_package);
state.pointer = pdomain;
status = acpi_extract_package(&(psd->package.elements[0]),
&format, &state);
if (ACPI_FAILURE(status)) {
pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
result = 0;
end:
kfree(buffer.pointer);
return result;
}
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
bool acpi_cpc_valid(void)
{
struct cpc_desc *cpc_ptr;
int cpu;
for_each_present_cpu(cpu) {
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
if (!cpc_ptr)
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_cpc_valid);
/**
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
* acpi_get_psd_map - Map the CPUs in the freq domain of a given cpu
* @cpu: Find all CPUs that share a domain with cpu.
* @cpu_data: Pointer to CPU specific CPPC data including PSD info.
*
* Return: 0 for success or negative value for err.
*/
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data)
{
struct cpc_desc *cpc_ptr, *match_cpc_ptr;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
struct acpi_psd_package *match_pdomain;
struct acpi_psd_package *pdomain;
int count_target, i;
/*
* Now that we have _PSD data from all CPUs, let's setup P-state
* domain info.
*/
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
if (!cpc_ptr)
return -EFAULT;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
pdomain = &(cpc_ptr->domain_info);
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
if (pdomain->num_processors <= 1)
return 0;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
/* Validate the Domain info */
count_target = pdomain->num_processors;
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ALL;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_HW;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ANY;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
for_each_possible_cpu(i) {
if (i == cpu)
continue;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
match_cpc_ptr = per_cpu(cpc_desc_ptr, i);
if (!match_cpc_ptr)
goto err_fault;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
match_pdomain = &(match_cpc_ptr->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
/* Here i and cpu are in the same domain */
if (match_pdomain->num_processors != count_target)
goto err_fault;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
if (pdomain->coord_type != match_pdomain->coord_type)
goto err_fault;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
cpumask_set_cpu(i, cpu_data->shared_cpu_map);
}
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
return 0;
cppc_cpufreq: replace per-cpu data array with a list The cppc_cpudata per-cpu storage was inefficient (1) additional to causing functional issues (2) when CPUs are hotplugged out, due to per-cpu data being improperly initialised. (1) The amount of information needed for CPPC performance control in its cpufreq driver depends on the domain (PSD) coordination type: ANY: One set of CPPC control and capability data (e.g desired performance, highest/lowest performance, etc) applies to all CPUs in the domain. ALL: Same as ANY. To be noted that this type is not currently supported. When supported, information about which CPUs belong to a domain is needed in order for frequency change requests to be sent to each of them. HW: It's necessary to store CPPC control and capability information for all the CPUs. HW will then coordinate the performance state based on their limitations and requests. NONE: Same as HW. No HW coordination is expected. Despite this, the previous initialisation code would indiscriminately allocate memory for all CPUs (all_cpu_data) and unnecessarily duplicate performance capabilities and the domain sharing mask and type for each possible CPU. (2) With the current per-cpu structure, when having ANY coordination, the cppc_cpudata cpu information is not initialised (will remain 0) for all CPUs in a policy, other than policy->cpu. When policy->cpu is hotplugged out, the driver will incorrectly use the uninitialised (0) value of the other CPUs when making frequency changes. Additionally, the previous values stored in the perf_ctrls.desired_perf will be lost when policy->cpu changes. Therefore replace the array of per cpu data with a list. The memory for each structure is allocated at policy init, where a single structure can be allocated per policy, not per cpu. In order to accommodate the struct list_head node in the cppc_cpudata structure, the now unused cpu and cur_policy variables are removed. For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1, (4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows: Before patch: - ANY coordination: total slack req alloc/free caller 0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810 0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808 128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070 768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4 After patch: - ANY coordination: total slack req alloc/free caller 256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410 0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274 Additional notes: - A pointer to the policy's cppc_cpudata is stored in policy->driver_data - Driver registration is skipped if _CPC entries are not present. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-14 20:38:23 +08:00
err_fault:
/* Assume no coordination on any error parsing domain info */
cpumask_clear(cpu_data->shared_cpu_map);
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_NONE;
return -EFAULT;
}
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
static int register_pcc_channel(int pcc_ss_idx)
{
struct pcc_mbox_chan *pcc_chan;
u64 usecs_lat;
if (pcc_ss_idx >= 0) {
pcc_chan = pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
if (IS_ERR(pcc_chan)) {
pr_err("Failed to find PCC channel for subspace %d\n",
pcc_ss_idx);
return -ENODEV;
}
pcc_data[pcc_ss_idx]->pcc_channel = pcc_chan;
/*
* cppc_ss->latency is just a Nominal value. In reality
* the remote processor could be much slower to reply.
* So add an arbitrary amount of wait on top of Nominal.
*/
usecs_lat = NUM_RETRIES * pcc_chan->latency;
pcc_data[pcc_ss_idx]->deadline_us = usecs_lat;
pcc_data[pcc_ss_idx]->pcc_mrtt = pcc_chan->min_turnaround_time;
pcc_data[pcc_ss_idx]->pcc_mpar = pcc_chan->max_access_rate;
pcc_data[pcc_ss_idx]->pcc_nominal = pcc_chan->latency;
pcc_data[pcc_ss_idx]->pcc_comm_addr =
acpi_os_ioremap(pcc_chan->shmem_base_addr,
pcc_chan->shmem_size);
if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
pr_err("Failed to ioremap PCC comm region mem for %d\n",
pcc_ss_idx);
return -ENOMEM;
}
/* Set flag so that we don't come here for each CPU. */
pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
}
return 0;
}
/**
* cpc_ffh_supported() - check if FFH reading supported
*
* Check if the architecture has support for functional fixed hardware
* read/write capability.
*
* Return: true for supported, false for not supported
*/
bool __weak cpc_ffh_supported(void)
{
return false;
}
/**
* pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
*
* Check and allocate the cppc_pcc_data memory.
* In some processor configurations it is possible that same subspace
* is shared between multiple CPUs. This is seen especially in CPUs
* with hardware multi-threading support.
*
* Return: 0 for success, errno for failure
*/
static int pcc_data_alloc(int pcc_ss_id)
{
if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
return -EINVAL;
if (pcc_data[pcc_ss_id]) {
pcc_data[pcc_ss_id]->refcount++;
} else {
pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data),
GFP_KERNEL);
if (!pcc_data[pcc_ss_id])
return -ENOMEM;
pcc_data[pcc_ss_id]->refcount++;
}
return 0;
}
/* Check if CPPC revision + num_ent combination is supported */
static bool is_cppc_supported(int revision, int num_ent)
{
int expected_num_ent;
switch (revision) {
case CPPC_V2_REV:
expected_num_ent = CPPC_V2_NUM_ENT;
break;
case CPPC_V3_REV:
expected_num_ent = CPPC_V3_NUM_ENT;
break;
default:
pr_debug("Firmware exports unsupported CPPC revision: %d\n",
revision);
return false;
}
if (expected_num_ent != num_ent) {
pr_debug("Firmware exports %d entries. Expected: %d for CPPC rev:%d\n",
num_ent, expected_num_ent, revision);
return false;
}
return true;
}
/*
* An example CPC table looks like the following.
*
* Name (_CPC, Package() {
* 17, // NumEntries
* 1, // Revision
* ResourceTemplate() {Register(PCC, 32, 0, 0x120, 2)}, // Highest Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x124, 2)}, // Nominal Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x128, 2)}, // Lowest Nonlinear Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x12C, 2)}, // Lowest Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x130, 2)}, // Guaranteed Performance Register
* ResourceTemplate() {Register(PCC, 32, 0, 0x110, 2)}, // Desired Performance Register
* ResourceTemplate() {Register(SystemMemory, 0, 0, 0, 0)},
* ...
* ...
* ...
* }
* Each Register() encodes how to access that specific register.
* e.g. a sample PCC entry has the following encoding:
*
* Register (
* PCC, // AddressSpaceKeyword
* 8, // RegisterBitWidth
* 8, // RegisterBitOffset
* 0x30, // RegisterAddress
* 9, // AccessSize (subspace ID)
* )
*/
#ifndef init_freq_invariance_cppc
static inline void init_freq_invariance_cppc(void) { }
#endif
/**
* acpi_cppc_processor_probe - Search for per CPU _CPC objects.
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
*
* Return: 0 for success or negative value for err.
*/
int acpi_cppc_processor_probe(struct acpi_processor *pr)
{
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj, *cpc_obj;
struct cpc_desc *cpc_ptr;
struct cpc_reg *gas_t;
struct device *cpu_dev;
acpi_handle handle = pr->handle;
unsigned int num_ent, i, cpc_rev;
int pcc_subspace_id = -1;
acpi_status status;
int ret = -EFAULT;
/* Parse the ACPI _CPC table for this CPU. */
status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
ACPI_TYPE_PACKAGE);
if (ACPI_FAILURE(status)) {
ret = -ENODEV;
goto out_buf_free;
}
out_obj = (union acpi_object *) output.pointer;
cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL);
if (!cpc_ptr) {
ret = -ENOMEM;
goto out_buf_free;
}
/* First entry is NumEntries. */
cpc_obj = &out_obj->package.elements[0];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
num_ent = cpc_obj->integer.value;
} else {
pr_debug("Unexpected entry type(%d) for NumEntries\n",
cpc_obj->type);
goto out_free;
}
cpc_ptr->num_entries = num_ent;
/* Second entry should be revision. */
cpc_obj = &out_obj->package.elements[1];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_rev = cpc_obj->integer.value;
} else {
pr_debug("Unexpected entry type(%d) for Revision\n",
cpc_obj->type);
goto out_free;
}
cpc_ptr->version = cpc_rev;
if (!is_cppc_supported(cpc_rev, num_ent))
goto out_free;
/* Iterate through remaining entries in _CPC */
for (i = 2; i < num_ent; i++) {
cpc_obj = &out_obj->package.elements[i];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
} else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
gas_t = (struct cpc_reg *)
cpc_obj->buffer.pointer;
/*
* The PCC Subspace index is encoded inside
* the CPC table entries. The same PCC index
* will be used for all the PCC entries,
* so extract it only once.
*/
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
if (pcc_subspace_id < 0) {
pcc_subspace_id = gas_t->access_width;
if (pcc_data_alloc(pcc_subspace_id))
goto out_free;
} else if (pcc_subspace_id != gas_t->access_width) {
pr_debug("Mismatched PCC ids.\n");
goto out_free;
}
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
if (gas_t->address) {
void __iomem *addr;
addr = ioremap(gas_t->address, gas_t->bit_width/8);
if (!addr)
goto out_free;
cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
}
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
if (gas_t->access_width < 1 || gas_t->access_width > 3) {
/*
* 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit.
* SystemIO doesn't implement 64-bit
* registers.
*/
pr_debug("Invalid access width %d for SystemIO register\n",
gas_t->access_width);
goto out_free;
}
if (gas_t->address & OVER_16BTS_MASK) {
/* SystemIO registers use 16-bit integer addresses */
pr_debug("Invalid IO port %llu for SystemIO register\n",
gas_t->address);
goto out_free;
}
} else {
if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
/* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */
pr_debug("Unsupported register type: %d\n", gas_t->space_id);
goto out_free;
}
}
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
} else {
pr_debug("Err in entry:%d in CPC table of CPU:%d\n", i, pr->id);
goto out_free;
}
}
per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
/*
* Initialize the remaining cpc_regs as unsupported.
* Example: In case FW exposes CPPC v2, the below loop will initialize
* LOWEST_FREQ and NOMINAL_FREQ regs as unsupported
*/
for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) {
cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER;
cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0;
}
/* Store CPU Logical ID */
cpc_ptr->cpu_id = pr->id;
/* Parse PSD data for this CPU */
ret = acpi_get_psd(cpc_ptr, handle);
if (ret)
goto out_free;
/* Register PCC channel once for all PCC subspace ID. */
if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
ret = register_pcc_channel(pcc_subspace_id);
if (ret)
goto out_free;
init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
}
/* Everything looks okay */
pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
/* Add per logical CPU nodes for reading its feedback counters. */
cpu_dev = get_cpu_device(pr->id);
if (!cpu_dev) {
ret = -EINVAL;
goto out_free;
}
/* Plug PSD data into this CPU's CPC descriptor. */
per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj,
"acpi_cppc");
if (ret) {
per_cpu(cpc_desc_ptr, pr->id) = NULL;
kobject_put(&cpc_ptr->kobj);
goto out_free;
}
init_freq_invariance_cppc();
kfree(output.pointer);
return 0;
out_free:
/* Free all the mapped sys mem areas for this CPU */
for (i = 2; i < cpc_ptr->num_entries; i++) {
void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
if (addr)
iounmap(addr);
}
kfree(cpc_ptr);
out_buf_free:
kfree(output.pointer);
return ret;
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
/**
* acpi_cppc_processor_exit - Cleanup CPC structs.
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
*
* Return: Void
*/
void acpi_cppc_processor_exit(struct acpi_processor *pr)
{
struct cpc_desc *cpc_ptr;
unsigned int i;
void __iomem *addr;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
if (pcc_ss_id >= 0 && pcc_data[pcc_ss_id]) {
if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
pcc_data[pcc_ss_id]->refcount--;
if (!pcc_data[pcc_ss_id]->refcount) {
pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
kfree(pcc_data[pcc_ss_id]);
ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit() When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN warning: [ 20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8 [ 20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1 [ 20.884826] [ 20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289 [ 20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 20.903505] Call trace: [ 20.905942] dump_backtrace+0x0/0x200 [ 20.909593] show_stack+0x14/0x20 [ 20.912899] dump_stack+0xd4/0x130 [ 20.916291] print_address_description.isra.9+0x6c/0x3b8 [ 20.921592] __kasan_report+0x12c/0x23c [ 20.925417] kasan_report+0xc/0x18 [ 20.928808] __asan_load4+0x94/0xb8 [ 20.932286] pcc_data_alloc+0x40/0xb8 [ 20.935938] acpi_cppc_processor_probe+0x4e8/0xb08 [ 20.940717] __acpi_processor_start+0x48/0xb0 [ 20.945062] acpi_processor_start+0x40/0x60 [ 20.949235] really_probe+0x118/0x548 [ 20.952887] driver_probe_device+0x7c/0x148 [ 20.957059] device_driver_attach+0x94/0xa0 [ 20.961231] __driver_attach+0xa4/0x110 [ 20.965055] bus_for_each_dev+0xe8/0x158 [ 20.968966] driver_attach+0x30/0x40 [ 20.972531] bus_add_driver+0x234/0x2f0 [ 20.976356] driver_register+0xbc/0x1d0 [ 20.980182] acpi_processor_driver_init+0x40/0xe4 [ 20.984875] do_one_initcall+0xb4/0x254 [ 20.988700] kernel_init_freeable+0x24c/0x2f8 [ 20.993047] kernel_init+0x10/0x118 [ 20.996524] ret_from_fork+0x10/0x18 [ 21.000087] [ 21.001567] Allocated by task 1: [ 21.004785] save_stack+0x28/0xc8 [ 21.008089] __kasan_kmalloc.isra.9+0xbc/0xd8 [ 21.012435] kasan_kmalloc+0xc/0x18 [ 21.015913] pcc_data_alloc+0x94/0xb8 [ 21.019564] acpi_cppc_processor_probe+0x4e8/0xb08 [ 21.024343] __acpi_processor_start+0x48/0xb0 [ 21.028689] acpi_processor_start+0x40/0x60 [ 21.032860] really_probe+0x118/0x548 [ 21.036512] driver_probe_device+0x7c/0x148 [ 21.040684] device_driver_attach+0x94/0xa0 [ 21.044855] __driver_attach+0xa4/0x110 [ 21.048680] bus_for_each_dev+0xe8/0x158 [ 21.052591] driver_attach+0x30/0x40 [ 21.056155] bus_add_driver+0x234/0x2f0 [ 21.059980] driver_register+0xbc/0x1d0 [ 21.063805] acpi_processor_driver_init+0x40/0xe4 [ 21.068497] do_one_initcall+0xb4/0x254 [ 21.072322] kernel_init_freeable+0x24c/0x2f8 [ 21.076667] kernel_init+0x10/0x118 [ 21.080144] ret_from_fork+0x10/0x18 [ 21.083707] [ 21.085186] Freed by task 1: [ 21.088056] save_stack+0x28/0xc8 [ 21.091360] __kasan_slab_free+0x118/0x180 [ 21.095445] kasan_slab_free+0x10/0x18 [ 21.099183] kfree+0x80/0x268 [ 21.102139] acpi_cppc_processor_exit+0x1a8/0x1b8 [ 21.106832] acpi_processor_stop+0x70/0x80 [ 21.110917] really_probe+0x174/0x548 [ 21.114568] driver_probe_device+0x7c/0x148 [ 21.118740] device_driver_attach+0x94/0xa0 [ 21.122912] __driver_attach+0xa4/0x110 [ 21.126736] bus_for_each_dev+0xe8/0x158 [ 21.130648] driver_attach+0x30/0x40 [ 21.134212] bus_add_driver+0x234/0x2f0 [ 21.0x10/0x18 [ 21.161764] [ 21.163244] The buggy address belongs to the object at ffff00236cdeb600 [ 21.163244] which belongs to the cache kmalloc-256 of size 256 [ 21.175750] The buggy address is located 132 bytes inside of [ 21.175750] 256-byte region [ffff00236cdeb600, ffff00236cdeb700) [ 21.187473] The buggy address belongs to the page: [ 21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0 [ 21.202331] flags: 0x1ffff00000010200(slab|head) [ 21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00 [ 21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000 [ 21.222400] page dumped because: kasan: bad access detected [ 21.227959] [ 21.229438] Memory state around the buggy address: [ 21.234218] ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.241427] ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.255845] ^ [ 21.259062] ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 21.266272] ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 21.273480] ================================================================== It seems that global pcc_data[pcc_ss_id] can be freed in acpi_cppc_processor_exit(), but we may later reference this value, so NULLify it when freed. Also remove the useless setting of data "pcc_channel_acquired", which we're about to free. Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs") Signed-off-by: John Garry <john.garry@huawei.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-15 22:07:31 +08:00
pcc_data[pcc_ss_id] = NULL;
}
}
}
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
ACPI / CPPC: Fix crash in acpi_cppc_processor_exit() First I had crashed what I bisected down to de966cf4a4fa (sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIO) because it made SCHED_ITMT the default. Then I run another bisect round and got here with the same backtrace: |BUG: unable to handle kernel NULL pointer dereference at (null) |IP: [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60 |PGD 0 [ 0.577616] |Oops: 0000 [#1] SMP |Modules linked in: |CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc6-00146-g17669006adf6 #51 |task: ffff88003f878000 task.stack: ffffc90000008000 |RIP: 0010:[<ffffffff812aab6e>] [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60 |RSP: 0000:ffffc9000000bd48 EFLAGS: 00010296 |RAX: 00000000000137e0 RBX: 0000000000000000 RCX: 0000000000000001 |RDX: ffff88003fc00000 RSI: 0000000000000000 RDI: ffff88003fbca130 |RBP: ffffc9000000bd60 R08: 0000000000000514 R09: 0000000000000000 |R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002 |R13: 0000000000000020 R14: ffffffff8167cb00 R15: 0000000000000000 |FS: 0000000000000000(0000) GS:ffff88003fcc0000(0000) knlGS:0000000000000000 |CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 |CR2: 0000000000000000 CR3: 0000000001618000 CR4: 00000000000406e0 |Stack: | ffff88003f939848 ffff88003fbca130 0000000000000001 ffffc9000000bd80 | ffffffff812a4ccb ffff88003fc0cee8 0000000000000000 ffffc9000000bdb8 | ffffffff812dc20d ffff88003fc0cee8 ffffffff8167cb00 ffff88003fc0cf48 |Call Trace: | [<ffffffff812a4ccb>] acpi_processor_stop+0xb2/0xc5 | [<ffffffff812dc20d>] driver_probe_device+0x14d/0x2f0 | [<ffffffff812dc41e>] __driver_attach+0x6e/0x90 | [<ffffffff812da234>] bus_for_each_dev+0x54/0x90 | [<ffffffff812dbbf9>] driver_attach+0x19/0x20 | [<ffffffff812db6a6>] bus_add_driver+0xe6/0x200 | [<ffffffff812dcb23>] driver_register+0x83/0xc0 | [<ffffffff816f050a>] acpi_processor_driver_init+0x20/0x94 | [<ffffffff81000487>] do_one_initcall+0x97/0x180 | [<ffffffff816ccf5c>] kernel_init_freeable+0x112/0x1a6 | [<ffffffff813a0fc9>] kernel_init+0x9/0xf0 | [<ffffffff813acf35>] ret_from_fork+0x25/0x30 |Code: 02 00 00 00 48 8b 14 d5 e0 c3 55 81 48 8b 1c 02 4c 8d 6b 20 eb 15 49 8b 7d 00 48 85 ff 74 05 e8 39 8c d9 ff 41 ff c4 49 83 c5 20 <44> 3b 23 72 e6 48 8d bb a0 02 00 00 e8 b1 6f f9 ff 48 89 df e8 |RIP [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60 | RSP <ffffc9000000bd48> |CR2: 0000000000000000 |---[ end trace 917a625107b09711 ]--- Fix it. Fixes: 17669006adf6 (cpufreq/intel_pstate: Use CPPC to get max performance) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08 03:06:08 +08:00
if (!cpc_ptr)
return;
/* Free all the mapped sys mem areas for this CPU */
for (i = 2; i < cpc_ptr->num_entries; i++) {
addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
if (addr)
iounmap(addr);
}
kobject_put(&cpc_ptr->kobj);
kfree(cpc_ptr);
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
/**
* cpc_read_ffh() - Read FFH register
* @cpunum: CPU number to read
* @reg: cppc register information
* @val: place holder for return value
*
* Read bit_width bits from a specified address and bit_offset
*
* Return: 0 for success and error code
*/
int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
{
return -ENOTSUPP;
}
/**
* cpc_write_ffh() - Write FFH register
* @cpunum: CPU number to write
* @reg: cppc register information
* @val: value to write
*
* Write value of bit_width bits to a specified address and bit_offset
*
* Return: 0 for success and error code
*/
int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
{
return -ENOTSUPP;
}
/*
* Since cpc_read and cpc_write are called while holding pcc_lock, it should be
* as fast as possible. We have already mapped the PCC subspace during init, so
* we can directly write to it.
*/
static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
{
void __iomem *vaddr = NULL;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg_res->type == ACPI_TYPE_INTEGER) {
*val = reg_res->cpc_entry.int_value;
return 0;
}
*val = 0;
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
u32 width = 8 << (reg->access_width - 1);
u32 val_u32;
acpi_status status;
status = acpi_os_read_port((acpi_io_address)reg->address,
&val_u32, width);
if (ACPI_FAILURE(status)) {
pr_debug("Error: Failed to read SystemIO port %llx\n",
reg->address);
return -EFAULT;
}
*val = val_u32;
return 0;
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
return cpc_read_ffh(cpu, reg, val);
else
return acpi_os_read_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
switch (reg->bit_width) {
case 8:
*val = readb_relaxed(vaddr);
break;
case 16:
*val = readw_relaxed(vaddr);
break;
case 32:
*val = readl_relaxed(vaddr);
break;
case 64:
*val = readq_relaxed(vaddr);
break;
default:
pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
reg->bit_width, pcc_ss_id);
return -EFAULT;
}
return 0;
}
static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
{
int ret_val = 0;
void __iomem *vaddr = NULL;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
u32 width = 8 << (reg->access_width - 1);
acpi_status status;
status = acpi_os_write_port((acpi_io_address)reg->address,
(u32)val, width);
if (ACPI_FAILURE(status)) {
pr_debug("Error: Failed to write SystemIO port %llx\n",
reg->address);
return -EFAULT;
}
return 0;
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
return cpc_write_ffh(cpu, reg, val);
else
return acpi_os_write_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
switch (reg->bit_width) {
case 8:
writeb_relaxed(val, vaddr);
break;
case 16:
writew_relaxed(val, vaddr);
break;
case 32:
writel_relaxed(val, vaddr);
break;
case 64:
writeq_relaxed(val, vaddr);
break;
default:
pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
reg->bit_width, pcc_ss_id);
ret_val = -EFAULT;
break;
}
return ret_val;
}
static int cppc_get_perf(int cpunum, enum cppc_regs reg_idx, u64 *perf)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *reg;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
reg = &cpc_desc->cpc_regs[reg_idx];
if (CPC_IN_PCC(reg)) {
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0;
if (pcc_ss_id < 0)
return -EIO;
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
cpc_read(cpunum, reg, perf);
else
ret = -EIO;
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
cpc_read(cpunum, reg, perf);
return 0;
}
/**
* cppc_get_desired_perf - Get the desired performance register value.
* @cpunum: CPU from which to get desired performance.
* @desired_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
{
return cppc_get_perf(cpunum, DESIRED_PERF, desired_perf);
}
EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
/**
* cppc_get_nominal_perf - Get the nominal performance register value.
* @cpunum: CPU from which to get nominal performance.
* @nominal_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
{
return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
}
/**
* cppc_get_perf_caps - Get a CPU's performance capabilities.
* @cpunum: CPU from which to get capabilities info.
* @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
*
* Return: 0 for success with perf_caps populated else -ERRNO.
*/
int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *highest_reg, *lowest_reg,
*lowest_non_linear_reg, *nominal_reg, *guaranteed_reg,
*low_freq_reg = NULL, *nom_freq_reg = NULL;
u64 high, low, guaranteed, nom, min_nonlinear, low_f = 0, nom_f = 0;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0, regs_in_pcc = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ];
nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ];
guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF];
/* Are any of the regs PCC ?*/
if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) ||
CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
regs_in_pcc = 1;
down_write(&pcc_ss_data->pcc_lock);
/* Ring doorbell once to update PCC subspace */
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
}
cpc_read(cpunum, highest_reg, &high);
perf_caps->highest_perf = high;
cpc_read(cpunum, lowest_reg, &low);
perf_caps->lowest_perf = low;
cpc_read(cpunum, nominal_reg, &nom);
perf_caps->nominal_perf = nom;
if (guaranteed_reg->type != ACPI_TYPE_BUFFER ||
IS_NULL_REG(&guaranteed_reg->cpc_entry.reg)) {
perf_caps->guaranteed_perf = 0;
} else {
cpc_read(cpunum, guaranteed_reg, &guaranteed);
perf_caps->guaranteed_perf = guaranteed;
}
cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
perf_caps->lowest_nonlinear_perf = min_nonlinear;
if (!high || !low || !nom || !min_nonlinear)
ret = -EFAULT;
/* Read optional lowest and nominal frequencies if present */
if (CPC_SUPPORTED(low_freq_reg))
cpc_read(cpunum, low_freq_reg, &low_f);
if (CPC_SUPPORTED(nom_freq_reg))
cpc_read(cpunum, nom_freq_reg, &nom_f);
perf_caps->lowest_freq = low_f;
perf_caps->nominal_freq = nom_f;
out_err:
if (regs_in_pcc)
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
/**
* cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
* @cpunum: CPU from which to read counters.
* @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
*
* Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
*/
int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *delivered_reg, *reference_reg,
*ref_perf_reg, *ctr_wrap_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
u64 delivered, reference, ref_perf, ctr_wrap_time;
int ret = 0, regs_in_pcc = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME];
/*
* If reference perf register is not supported then we should
* use the nominal perf value
*/
if (!CPC_SUPPORTED(ref_perf_reg))
ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
/* Are any of the regs PCC ?*/
if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
regs_in_pcc = 1;
/* Ring doorbell once to update PCC subspace */
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
}
cpc_read(cpunum, delivered_reg, &delivered);
cpc_read(cpunum, reference_reg, &reference);
cpc_read(cpunum, ref_perf_reg, &ref_perf);
/*
* Per spec, if ctr_wrap_time optional register is unsupported, then the
* performance counters are assumed to never wrap during the lifetime of
* platform
*/
ctr_wrap_time = (u64)(~((u64)0));
if (CPC_SUPPORTED(ctr_wrap_reg))
cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time);
if (!delivered || !reference || !ref_perf) {
ret = -EFAULT;
goto out_err;
}
perf_fb_ctrs->delivered = delivered;
perf_fb_ctrs->reference = reference;
perf_fb_ctrs->reference_perf = ref_perf;
perf_fb_ctrs->wraparound_time = ctr_wrap_time;
out_err:
if (regs_in_pcc)
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
/**
* cppc_set_enable - Set to enable CPPC on the processor by writing the
* Continuous Performance Control package EnableRegister field.
* @cpu: CPU for which to enable CPPC register.
* @enable: 0 - disable, 1 - enable CPPC feature on the processor.
*
* Return: 0 for success, -ERRNO or -EIO otherwise.
*/
int cppc_set_enable(int cpu, bool enable)
{
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_register_resource *enable_reg;
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = -EINVAL;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -EINVAL;
}
enable_reg = &cpc_desc->cpc_regs[ENABLE];
if (CPC_IN_PCC(enable_reg)) {
if (pcc_ss_id < 0)
return -EIO;
ret = cpc_write(cpu, enable_reg, enable);
if (ret)
return ret;
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
/* after writing CPC, transfer the ownership of PCC to platfrom */
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
return cpc_write(cpu, enable_reg, enable);
}
EXPORT_SYMBOL_GPL(cppc_set_enable);
/**
* cppc_set_perf - Set a CPU's performance controls.
* @cpu: CPU for which to set performance controls.
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
*
* Return: 0 for success, -ERRNO otherwise.
*/
int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cpc_register_resource *desired_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -ENODEV;
}
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
/*
* This is Phase-I where we want to write to CPC registers
* -> We want all CPUs to be able to execute this phase in parallel
*
* Since read_lock can be acquired by multiple CPUs simultaneously we
* achieve that goal here
*/
if (CPC_IN_PCC(desired_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
if (pcc_ss_data->platform_owns_pcc) {
ret = check_pcc_chan(pcc_ss_id, false);
if (ret) {
up_read(&pcc_ss_data->pcc_lock);
return ret;
}
}
/*
* Update the pending_write to make sure a PCC CMD_READ will not
* arrive and steal the channel during the switch to write lock
*/
pcc_ss_data->pending_pcc_write_cmd = true;
cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
cpc_desc->write_cmd_status = 0;
}
/*
* Skip writing MIN/MAX until Linux knows how to come up with
* useful values.
*/
cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
if (CPC_IN_PCC(desired_reg))
up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
/*
* This is Phase-II where we transfer the ownership of PCC to Platform
*
* Short Summary: Basically if we think of a group of cppc_set_perf
* requests that happened in short overlapping interval. The last CPU to
* come out of Phase-I will enter Phase-II and ring the doorbell.
*
* We have the following requirements for Phase-II:
* 1. We want to execute Phase-II only when there are no CPUs
* currently executing in Phase-I
* 2. Once we start Phase-II we want to avoid all other CPUs from
* entering Phase-I.
* 3. We want only one CPU among all those who went through Phase-I
* to run phase-II
*
* If write_trylock fails to get the lock and doesn't transfer the
* PCC ownership to the platform, then one of the following will be TRUE
* 1. There is at-least one CPU in Phase-I which will later execute
* write_trylock, so the CPUs in Phase-I will be responsible for
* executing the Phase-II.
* 2. Some other CPU has beaten this CPU to successfully execute the
* write_trylock and has already acquired the write_lock. We know for a
* fact it (other CPU acquiring the write_lock) couldn't have happened
* before this CPU's Phase-I as we held the read_lock.
* 3. Some other CPU executing pcc CMD_READ has stolen the
* down_write, in which case, send_pcc_cmd will check for pending
* CMD_WRITE commands by checking the pending_pcc_write_cmd.
* So this CPU can be certain that its request will be delivered
* So in all cases, this CPU knows that its request will be delivered
* by another CPU and can return
*
* After getting the down_write we still need to check for
* pending_pcc_write_cmd to take care of the following scenario
* The thread running this code could be scheduled out between
* Phase-I and Phase-II. Before it is scheduled back on, another CPU
* could have delivered the request to Platform by triggering the
* doorbell and transferred the ownership of PCC to platform. So this
* avoids triggering an unnecessary doorbell and more importantly before
* triggering the doorbell it makes sure that the PCC channel ownership
* is still with OSPM.
* pending_pcc_write_cmd can also be cleared by a different CPU, if
* there was a pcc CMD_READ waiting on down_write and it steals the lock
* before the pcc CMD_WRITE is completed. send_pcc_cmd checks for this
* case during a CMD_READ and if there are pending writes it delivers
* the write command before servicing the read command
*/
if (CPC_IN_PCC(desired_reg)) {
if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
/* Update only if there are pending write commands */
if (pcc_ss_data->pending_pcc_write_cmd)
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
} else
/* Wait until pcc_write_cnt is updated by send_pcc_cmd */
wait_event(pcc_ss_data->pcc_write_wait_q,
cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
/* send_pcc_cmd updates the status in case of failure */
ret = cpc_desc->write_cmd_status;
}
return ret;
}
EXPORT_SYMBOL_GPL(cppc_set_perf);
/**
* cppc_get_transition_latency - returns frequency transition latency in ns
*
* ACPI CPPC does not explicitly specify how a platform can specify the
* transition latency for performance change requests. The closest we have
* is the timing information from the PCCT tables which provides the info
* on the number and frequency of PCC commands the platform can handle.
*/
unsigned int cppc_get_transition_latency(int cpu_num)
{
/*
* Expected transition latency is based on the PCCT timing values
* Below are definition from ACPI spec:
* pcc_nominal- Expected latency to process a command, in microseconds
* pcc_mpar - The maximum number of periodic requests that the subspace
* channel can support, reported in commands per minute. 0
* indicates no limitation.
* pcc_mrtt - The minimum amount of time that OSPM must wait after the
* completion of a command before issuing the next command,
* in microseconds.
*/
unsigned int latency_ns = 0;
struct cpc_desc *cpc_desc;
struct cpc_register_resource *desired_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
ACPI / CPPC: Fix KASAN global out of bounds warning Default value of pcc_subspace_idx is -1. Make sure to check pcc_subspace_idx before using the same as array index. This will avoid following KASAN warnings too. [ 15.113449] ================================================================== [ 15.116983] BUG: KASAN: global-out-of-bounds in cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] Read of size 8 at addr ffffffffb9a5c0d8 by task swapper/0/1 [ 15.116983] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2+ #2 [ 15.116983] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 15.116983] Call Trace: [ 15.116983] dump_stack+0x7c/0xbb [ 15.116983] print_address_description+0x1df/0x290 [ 15.116983] kasan_report+0x28a/0x370 [ 15.116983] ? cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] ? cpc_read+0x210/0x210 [ 15.116983] ? __rdmsr_on_cpu+0x90/0x90 [ 15.116983] ? rdmsrl_on_cpu+0xa9/0xe0 [ 15.116983] ? rdmsr_on_cpu+0x100/0x100 [ 15.116983] ? wrmsrl_on_cpu+0x9c/0xd0 [ 15.116983] ? wrmsrl_on_cpu+0x9c/0xd0 [ 15.116983] ? wrmsr_on_cpu+0xe0/0xe0 [ 15.116983] __intel_pstate_cpu_init.part.16+0x3a2/0x530 [ 15.116983] ? intel_pstate_init_cpu+0x197/0x390 [ 15.116983] ? show_no_turbo+0xe0/0xe0 [ 15.116983] ? __lockdep_init_map+0xa0/0x290 [ 15.116983] intel_pstate_cpu_init+0x30/0x60 [ 15.116983] cpufreq_online+0x155/0xac0 [ 15.116983] cpufreq_add_dev+0x9b/0xb0 [ 15.116983] subsys_interface_register+0x1ae/0x290 [ 15.116983] ? bus_unregister_notifier+0x40/0x40 [ 15.116983] ? mark_held_locks+0x83/0xb0 [ 15.116983] ? _raw_write_unlock_irqrestore+0x32/0x60 [ 15.116983] ? intel_pstate_setup+0xc/0x104 [ 15.116983] ? intel_pstate_setup+0xc/0x104 [ 15.116983] ? cpufreq_register_driver+0x1ce/0x2b0 [ 15.116983] cpufreq_register_driver+0x1ce/0x2b0 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] intel_pstate_register_driver+0x3a/0xa0 [ 15.116983] intel_pstate_init+0x3c4/0x434 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] do_one_initcall+0x9c/0x206 [ 15.116983] ? parameq+0xa0/0xa0 [ 15.116983] ? initcall_blacklisted+0x150/0x150 [ 15.116983] ? lock_downgrade+0x2c0/0x2c0 [ 15.116983] kernel_init_freeable+0x327/0x3f0 [ 15.116983] ? start_kernel+0x612/0x612 [ 15.116983] ? _raw_spin_unlock_irq+0x29/0x40 [ 15.116983] ? finish_task_switch+0xdd/0x320 [ 15.116983] ? finish_task_switch+0x8e/0x320 [ 15.116983] ? rest_init+0xd0/0xd0 [ 15.116983] kernel_init+0xf/0x11a [ 15.116983] ? rest_init+0xd0/0xd0 [ 15.116983] ret_from_fork+0x24/0x30 [ 15.116983] The buggy address belongs to the variable: [ 15.116983] __key.36299+0x38/0x40 [ 15.116983] Memory state around the buggy address: [ 15.116983] ffffffffb9a5bf80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [ 15.116983] ffffffffb9a5c000: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [ 15.116983] >ffffffffb9a5c080: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 [ 15.116983] ^ [ 15.116983] ffffffffb9a5c100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 15.116983] ffffffffb9a5c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 15.116983] ================================================================== Fixes: 85b1407bf6d2 (ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs) Reported-by: Changbin Du <changbin.du@intel.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-04 22:06:54 +08:00
struct cppc_pcc_data *pcc_ss_data;
cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
if (!cpc_desc)
return CPUFREQ_ETERNAL;
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
if (!CPC_IN_PCC(desired_reg))
return CPUFREQ_ETERNAL;
ACPI / CPPC: Fix KASAN global out of bounds warning Default value of pcc_subspace_idx is -1. Make sure to check pcc_subspace_idx before using the same as array index. This will avoid following KASAN warnings too. [ 15.113449] ================================================================== [ 15.116983] BUG: KASAN: global-out-of-bounds in cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] Read of size 8 at addr ffffffffb9a5c0d8 by task swapper/0/1 [ 15.116983] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2+ #2 [ 15.116983] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016 [ 15.116983] Call Trace: [ 15.116983] dump_stack+0x7c/0xbb [ 15.116983] print_address_description+0x1df/0x290 [ 15.116983] kasan_report+0x28a/0x370 [ 15.116983] ? cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] cppc_get_perf_caps+0xf3/0x3b0 [ 15.116983] ? cpc_read+0x210/0x210 [ 15.116983] ? __rdmsr_on_cpu+0x90/0x90 [ 15.116983] ? rdmsrl_on_cpu+0xa9/0xe0 [ 15.116983] ? rdmsr_on_cpu+0x100/0x100 [ 15.116983] ? wrmsrl_on_cpu+0x9c/0xd0 [ 15.116983] ? wrmsrl_on_cpu+0x9c/0xd0 [ 15.116983] ? wrmsr_on_cpu+0xe0/0xe0 [ 15.116983] __intel_pstate_cpu_init.part.16+0x3a2/0x530 [ 15.116983] ? intel_pstate_init_cpu+0x197/0x390 [ 15.116983] ? show_no_turbo+0xe0/0xe0 [ 15.116983] ? __lockdep_init_map+0xa0/0x290 [ 15.116983] intel_pstate_cpu_init+0x30/0x60 [ 15.116983] cpufreq_online+0x155/0xac0 [ 15.116983] cpufreq_add_dev+0x9b/0xb0 [ 15.116983] subsys_interface_register+0x1ae/0x290 [ 15.116983] ? bus_unregister_notifier+0x40/0x40 [ 15.116983] ? mark_held_locks+0x83/0xb0 [ 15.116983] ? _raw_write_unlock_irqrestore+0x32/0x60 [ 15.116983] ? intel_pstate_setup+0xc/0x104 [ 15.116983] ? intel_pstate_setup+0xc/0x104 [ 15.116983] ? cpufreq_register_driver+0x1ce/0x2b0 [ 15.116983] cpufreq_register_driver+0x1ce/0x2b0 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] intel_pstate_register_driver+0x3a/0xa0 [ 15.116983] intel_pstate_init+0x3c4/0x434 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] ? intel_pstate_setup+0x104/0x104 [ 15.116983] do_one_initcall+0x9c/0x206 [ 15.116983] ? parameq+0xa0/0xa0 [ 15.116983] ? initcall_blacklisted+0x150/0x150 [ 15.116983] ? lock_downgrade+0x2c0/0x2c0 [ 15.116983] kernel_init_freeable+0x327/0x3f0 [ 15.116983] ? start_kernel+0x612/0x612 [ 15.116983] ? _raw_spin_unlock_irq+0x29/0x40 [ 15.116983] ? finish_task_switch+0xdd/0x320 [ 15.116983] ? finish_task_switch+0x8e/0x320 [ 15.116983] ? rest_init+0xd0/0xd0 [ 15.116983] kernel_init+0xf/0x11a [ 15.116983] ? rest_init+0xd0/0xd0 [ 15.116983] ret_from_fork+0x24/0x30 [ 15.116983] The buggy address belongs to the variable: [ 15.116983] __key.36299+0x38/0x40 [ 15.116983] Memory state around the buggy address: [ 15.116983] ffffffffb9a5bf80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [ 15.116983] ffffffffb9a5c000: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa [ 15.116983] >ffffffffb9a5c080: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 [ 15.116983] ^ [ 15.116983] ffffffffb9a5c100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 15.116983] ffffffffb9a5c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 15.116983] ================================================================== Fixes: 85b1407bf6d2 (ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs) Reported-by: Changbin Du <changbin.du@intel.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-04 22:06:54 +08:00
if (pcc_ss_id < 0)
return CPUFREQ_ETERNAL;
pcc_ss_data = pcc_data[pcc_ss_id];
if (pcc_ss_data->pcc_mpar)
latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000);
latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000);
return latency_ns;
}
EXPORT_SYMBOL_GPL(cppc_get_transition_latency);