OpenCloudOS-Kernel/drivers/clk/ti/Makefile

ifneq ($(CONFIG_OF),)
obj-y					+= clk.o autoidle.o clockdomain.o
clk-common				= dpll.o composite.o divider.o gate.o \
					  fixed-factor.o mux.o apll.o
obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(clk-common) interface.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(clk-common) clk-44xx.o
obj-$(CONFIG_SOC_OMAP5)			+= $(clk-common) clk-54xx.o
obj-$(CONFIG_SOC_DRA7XX)		+= $(clk-common) clk-7xx.o
endif
CLK: TI: add DT alias clock registration mechanism Some devices require their clocks to be available with a specific dev-id con-id mapping. With DT, the clocks can be found by default only with their name, or alternatively through the device node of the consumer. With drivers, that don't support DT fully yet, add mechanism to register specific clock names. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-18 16:52:33 +08:00			`ifneq ($(CONFIG_OF),)`
CLK: TI: add support for clockdomain binding Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-08-22 00:39:15 +08:00			`obj-y += clk.o autoidle.o clockdomain.o`
CLK: TI: add support for gate clock This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-06-18 23:55:59 +08:00			`clk-common = dpll.o composite.o divider.o gate.o \`
CLK: TI: DRA7: Add APLL support The patch adds support for DRA7 PCIe APLL. The APLL sources the optional functional clocks for PCIe module. APLL stands for Analog PLL. This is different when comapred with DPLL meaning Digital PLL, the phase detection is done using an analog circuit. Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-23 14:35:37 +08:00			`fixed-factor.o mux.o apll.o`
CLK: TI: add am33xx clock init file clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-19 16:36:01 +08:00			`obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o`
CLK: TI: add interface clock support for OMAP3 OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-15 18:14:20 +08:00			`obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o`
CLK: TI: add omap4 clock init file clk-44xx.c now contains the clock init functionality for omap4, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-18 20:57:51 +08:00			`obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o`
CLK: TI: add omap5 clock init file clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-18 22:15:51 +08:00			`obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o`
CLK: TI: add dra7 clock init file clk-7xx.c now contains the clock init functionality for dra7, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-18 22:41:00 +08:00			`obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o`
CLK: TI: add DT alias clock registration mechanism Some devices require their clocks to be available with a specific dev-id con-id mapping. With DT, the clocks can be found by default only with their name, or alternatively through the device node of the consumer. With drivers, that don't support DT fully yet, add mechanism to register specific clock names. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2013-07-18 16:52:33 +08:00			`endif`